法国合金标准(NF alloy standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC

编号	中文名称	英文名称
NF A00-500-5-1997	铸造.交货技术条件.第5部分:镁合金铸件的附加要求	(FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 5 : ADDITIONAL REQUIREMENTS FOR MAGNESIUM ALLOY CASTINGS. (EUROPEAN STANDARD EN 1559-5).)
NF A00-500-6-1999	铸造.交货技术条件.第6部分:锌合金铸件的附加要求	(FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 6 : ADDITIONAL REQUIREMENTS FOR ZINC ALLOY CASTINGS. (EUROPEAN STANDARD EN 1559-6).)
NF A00-501-3-1991	铸件.订货和供应的一般技术条件.第3部分:通过重量压力和负压的铝合金及镁合金的铸件	(FOUNDRY PRODUCTS. GENERAL TECHNICAL CONDITIONS FOR ORDERING AND SUPPLYING. PART 3 : GRAVITY,LOW PRESSURE AND VACUUM CASTINGS OF ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS.)
NF A01-009-1986	铜和铜合金.材料.词汇和定义	(Copper and copper alloys. Materials. Terms and definitions.)
NF A01-010-1971	铝和铝合金,铜和铜合金.取样、样品和试验用的试件	(ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. SAMPLES, SPECIMENS AND TEST PIECES.)
NF A01-111-1986	铜和铜合金.半成品供应的一般技术要求	(Copper and copper alloys. General technical requirements of supply of semi-finished products.)
NF A01-810-1975	锌合金锭.发射光谱分析用样品的制备和抽样	(Zinc alloy ingots. Selection and preparation of samples for spectrographic analysis.)
NF A01-820-1975	锌合金锭.化学分析用样品的制备和抽样	(Zinc alloy ingots. Selection and preparation of samples for chemical analysis.)
NF A02-002-1976	有色金属和非铸铁合金制造方式和交货条件常用名称	(CONVENTIONAL DESIGNATION OF THE METHODS OF MANUFACTURE AND DELIVERY STATES OF CAST NON FERROUS METALS AND ALLOYS.)
NF A02-006-1996	铜和铜合金.欧洲材料号码系统	(COPPER AND COPPER ALLOYS. EUROPEAN NUMBERING SYSTEM. (EUROPEAN STANDARD EN 1412).)
NF A02-007-1973	镁和镁合金制半成品.交货条件的常用名称	(SEMI-FINISHED PRODUCTS MADE OF MAGNESIUM AND MAGNESIUM ALLOYS. TEMPER DESIGNATION.)
NF A02-008-1996	铜和铜合金.材料条件或回火硬度标识	(Copper and copper alloys. Material condition or temper designation.)
NF A02-009-1986	铜和铜合金.材料.常用名称与符号	(Copper and copper alloys. Materials. Conventional designation.)
NF A02-011-1970	铝及铝合金.热处理和机械处理的词汇	(ALUMINIUM AND ALUMINIUM ALLOYS. VOCABULARY OF HEAT TREATMENTS AND MECHANICAL TREATMENTS.)
NF A02-120-1994	铝和铝合金.锻制产品的化学成分和产品形状.第1部分:数字命名系统	(Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 1 : numerical designation system.)
NF A02-120-3-2003	铝和铝合金.化学成分和锻造产品的外形.第3部分:化学成分	(Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3 : chemical composition.)
NF A02-121-1994	铝和铝合金.锻制产品的化学成分和外形.第2部分:基于名称与符号系统的化学符号	(Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 2 : chemical symbol based designation system.)
NF A02-122-1994	铝和铝合金.锻制产品的化学成分和产品形状.第3部分:化学成分	(ALUMINIUM AND ALUMINIUM ALLOYS. CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS. PART 3 : CHEMICAL COMPOSITION. (EUROPEAN STANDARD EN 573-3).)
NF A02-123-1994	铝和铝合金.锻制产品的化学成分和产品形状.第4部分:产品的形式	(ALUMINIUM AND ALUMIMIUM ALLOYS. CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS. PART 4 : FORM OF PRODUCTS. (EUROPEAN STANDARD EN 573-4).)
NF A02-130-1-2003	铝及铝合金.再熔主合金和铸件用合金铝锭的名称与符号.第1部分:数字命名系统	(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1 : numerical designation system.)
NF A02-130-2-2003	铝及铝合金.再熔主合金和铸件用合金铝锭的名称与符号.第2部分:基于命名系统的化学符号	(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2 : chemical symbol based designation system.)
NF A02-130-3-2003	铝及铝合金.再熔主合金和铸件用合金铝锭的名称与符号.第3部分:化合物的书写规则	(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3 : writing rules for chemical composition.)
NF A02-150-1993	锻铝和铝合金锻制产品名称术语	(Aluminium and aluminium alloys. Wrought products. Temper designations.)
NF A03-000-2000	铜和铜合金.螺旋延伸数的测定	(Copper and copper alloys - Determination of spiral elongation number.)
NF A03-174-1999	钢.伸长值的换算.第1部分:碳素钢和低合金钢	(Steel. Conversion of elongation values. Part 1 : carbon and low alloy steels.)
NF A03-253-1972	铝和铝合金.铜和铜合金.维氏硬度试验.0.2-120公斤力的试验负荷	(Aluminium and aluminium alloys. Copper and copper alloys. Vicker hardness. Test-loads ranging from 0,2 to 120 kgf.)
NF A03-260-1972	铝和铝合金.铜和铜合金.简单弯曲折叠试验	(ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. ORDINARY BENDING TEST.)
NF A03-268-1971	铝和铝合金.铜和铜合金.线材的简单扭转试验	(ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. SIMPLE TORSION TEST FOR WIRE.)
NF A03-820-1981	锌和锌合金.铸制品与轧制品的硬度试验	(ZINC AND ZINC ALLOYS. METHOD FOR THE VICKERS HARDNESS TESTING ON FOILS AND COILS.)
NF A03-830-1981	锌和锌合金.反复弯曲的疲劳试验	(ZINC AND ZINC ALLOYS. FATIGUE TEST (FLAT BENDING) OF SHEET,FOIL AND DIE CAST PIECES.)
NF A04-107-1980	钢铁产品.测定非合金钢线材中非金属杂质含量的显微照相方法	(IRON AND STEEL. MICROGRAPHIC METHOD OF DETERMINATION OF THE NON METALLIC INCLUSION CONTENT OF UNALLOYED WIRE ROD.)
NF A04-110-1984	钢铁产品.一般用于三次挤压或拉伸的非合金钢线材.表面检查	(Iron and steel. Wire rods of non-alloy general purpose steel for wire drawing. Surface examination.)
NF A04-150-1984	用射线照相术检查铝合金和镁合金铸件	(Radiographic examination of aluminium and magnesium alloy castings.)
NF A04-201-1984	钢铁产品.用非合金结构钢和特殊结构钢热处理.脱碳深度的测定	(Steel products. Special purpose unalloy and alloy structural steels for heat traitement. Determination of depth of decarburization.)
NF A04-503-1988	铝、铜、镍及其合金制半成品.粒径的测定.铝和铝合金	(Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Aluminium and aluminium alloys.)
NF A04-504-1995	铜和铜合金.晶粒大小平均值的评定	(Copper and copper alloys. Estimation of average grain size.)
NF A04-505-1988	铝、铜、镍及其合金制半成品.粒径的测定.镍和镍合金	(Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Nickel and nickel alloys.)
NF A05-001-1991	金属和合金材料的腐蚀.词汇	(CORROSION OF METALS AND ALLOYS. VOCABULARY.)
NF A05-110-2001	铜和铜合金.经切分带材的镗孔区域残留应力的测定	(Copper and copper alloys - Determination of residual stresses in the border area of slit strip.)
NF A05-111-1995	锻铜和铜合金.残余应力的检测.硝酸汞(1)试验	(Wrought copper and copper alloys. Detection of residual stress. Mercury(I) nitrate test.)
NF A05-113-1996	铜和铜合金.铜管或配件的内表面碳含量测定燃烧法	(Copper and copper alloys. Combustion method for determination of carbon on the inner surface of copper tubes or fittings.)
NF A05-115-1999	铜及铜合金.管的涡流测试	(Copper and copper alloys. Eddy current test for tubes.)
NF A05-270-1998	金属和合金材料的腐蚀.表面海水中的金属和合金的评估和阐述指南	(CORROSION OF METALS AND ALLOYS. GUIDELINES FOR EXPOSING AND EVALUATING METALS AND ALLOYS IN SURFACE SEA WATER. (EUROPEAN STANDARD EN ISO 11306).)
NF A05-301-1981	铝合金.厚铝应力腐蚀试验	(Aluminium alloys. Stress corrosion cracking of thick products.)
NF A05-305-1981	奥氏体不锈钢和镍铬铁奥氏体合金.在四连多硫酸钠中约束晶间腐蚀试验	(AUSTENITIC STAINLESS STEELS AND NI - CR - FE AUSTENITIC STAINLESS ALLOYS. INTERGRAIN CORROSION UNDER STRESS TEST IN SODIUM TETRATHIONATE.)
NF A05-306-1984	铝合金.薄铝制品腐蚀试验	(ALUMINIUM ALLOYS (SERIE 5XXX). EXFOLIATION CORROSION TESTING.)
NF A05-308-1995	金属和合金的腐蚀.双金属在露天暴露腐蚀试验中腐蚀的测定	(Corrosion of metals and alloys. Determination of bimetallic corrosion in outdoor exposure corrosion tests.)
NF A05-311-1995	金属和合金材料的腐蚀.黄铜阻抗的定义	(CORROSION OF METALS AND ALLOYS. DETERMINATION OF DEZINFICATION RESISTANCE OF BRASS. (EUROPEAN STANDARD EN ISO 6509).)
NF A05-315-1996	镍基合金.耐晶间腐蚀性的测定	(Nickel-based alloys. Determination of resistance to intergranular corrosion.)
NF A05-401-2002	金属和合金的腐蚀.核动力反应堆用的锆合金的水腐蚀试验	(Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors.)
NF A05-402-1995	金属和合金.大气腐蚀试验.现场测试的一般要求(欧洲标准EN ISO 8565)	(METALS AND ALLOYS. ATMOSPHERIC CORROSION TESTING. GENERAL REQUIREMENTS FOR FIELD TESTS. (EUROPEAN STANDARD EN ISO 8565).)
NF A05-412-2-2003	金属材料的防腐.土壤腐蚀的可能性.第2部分:低合金和非合金黑色金属材料	(Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2 : low alloyed and non alloyed ferrous materials.)
NF A05-501-6-2003	金属和合金的腐蚀.应力腐蚀试验.第6部分:恒定负荷或恒定位移条件下试验用预裂试样的制备	(Corrosion of metals and alloys - Stress corrosion testing - Part 6 : preparation and use of pre-cracked specimens for tests under constant load or constant displacement.)
NF A06-202-1995	银和银珠宝合金的测定.溴化钾容量法	(DETERMINATION OF SILVER IN SILVER JEWELLERY ALLOYS. VOLUMETRIC (POTENTIOMETRIC) METHOD USING POTASSIUM BROMIDE. (EUROPEAN STANDARD EN 31427).)
NF A06-203-1995	在铂饰用合金中铂含量测定.用氯化汞还原法测定重量	(DETERMINATION OF PLATINUM IN PLATINUM JEWELLERY ALLOYS. GRAVIMETRIC METHOD AFTER REDUCTION WITH MERCURY(I) CHLORIDE. (EUROPEAN STANDARD EN ISO 11489).)
NF A06-204-1995	钯珠宝合金中钯的测定.丁二酮肟重量的测定	(DETERMINATION OF PALLADIUM IN PALLADIUM JEWELLERY ALLOYS. GRAVIMETRIC METHOD WITH DIMETHYL GLYOXIME. (EUROPEAN STANDARD EN ISO 11490).)
NF A06-205-1995	在铂饰用合金中铂含量测定.六氯铂酸二铵沉淀后测定重量	(DETERMINATION OF PLATINUM IN PLATINUM JEWELLERY ALLOYS. GRAVIMETRIC METHOD AFTER PRECIPITATION OF DIAMMONIUM HEXACHLOROPLATINATE. (EUROPEAN STANDARD EN ISO 11210).)
NF A06-386-2-2003	非合金钢.低碳含量测定.第2部分:在感应炉中燃烧(预热)后的红外吸收法	(Unalloyed steel - Determination of low carbon content - Part 2 : infrared absorption method after combustion in an induction furnace (with preheating).)
NF A06-400-1999	铅和铅合金.分析取样方法	(Lead and lead alloys. Methods of sampling for analysis.)
NF A06-551-1976	铝和铝合金的化学分析.铜的分光光度测定	(Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of copper.)
NF A06-552-1964	铝和铝合金的化学分析.铜的测定	(Chemical analysis of aluminium and aluminium alloys. Determination of copper.)
NF A06-553-1966	铝和铝合金的化学分析.锌的测定	(CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF ZINC.)
NF A06-564-1969	抗摩擦铝合金的化学分析.锡的容量法测定	(CHEMICAL ANALYSIS OF ALUMINIUM ANTIFRICTION ALLOYS. VOLUMETRIC DETERMINATION OF TIN.)
NF A06-568-1971	铝和铝合金的化学分析.锡的分光光度测定	(CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF TIN.)
NF A06-570-1964	铝和铝合金的化学分析.硅总含量的测定	(Chemical analysis of aluminium and aluminium alloys. Determination of total silicon.)
NF A06-571-1964	铝和铝合金的化学分析.铁的分光光度测定	(CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF IRON.)
NF A06-574-1966	铝和铝合金的化学分析.钛的分光光度测定	(CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF TITANIUM.)
NF A06-575-1971	铝合金的化学分析.镍的重量法测定	(CHEMICAL ANALYSIS OF ALUMINIUM ALLOYS. GRAVIMETRIC DETERMINATION OF NICKEL.)
NF A06-576-1966	铝和铝合金的化学分析.锰的分光光度测定	(CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF MANGANESE.)
NF A06-577-1984	铝和铝合金的化学分析.钴的比色法测定	(Chemical analysis of aluminium and aluminium alloys. Colorimetric determination of cobalt.)
NF A06-579-1966	铝和铝合金的化学分析.镁的测定	(CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF MAGNESIUM.)
NF A06-581-1984	铝和铝合金的化学分析.铬的比色法测定	(Chemical analysis of aluminium and aluminium alloys. Colorimetric determination of chromium.)
NF A06-582-1959	铝和铝合金的化学分析.锆的分光光度测定	(CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. COLORIMETRIC DETERMINATION OF ZIRCONIUM.)
NF A06-583-1984	铝和铝合金的化学分析.铋的分光光度测定	(Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of bismuth.)
NF A06-584-1984	铝和铝合金的化学分析.铍的分光光度测定	(Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of berrylium.)
NF A06-585-1965	铝和铝合金的化学分析.铅的测定	(CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF LEAD.)
NF A06-586-1965	铝和铝合金的化学分析.硼的分光光度测定	(CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF BORON.)
NF A06-587-1965	铝和铝合金的化学分析.汞的测定	(CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF MERCURY.)
NF A06-602-1984	镁和镁合金的化学分析.铝的测定	(Chemical analysis of magnesium and magnesium alloys. Determination of aluminium.)
NF A06-606-1984	镁和镁合金的化学分析.铁的分光光度测定	(Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of iron.)
NF A06-609-1966	镁和镁合金的化学分析.锌的测定	(CHEMICAL ANALYSIS OF MAGNESIUM AND MAGNESIUM ALLOYS. DETERMINATION OF ZINC.)
NF A06-613-1976	镁和镁合金的化学分析.铜的分光光度测定	(CHEMICAL ANALYSIS OF MAGNESIUM AND MAGNESIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF COPPER.)
NF A06-616-1981	镁和镁合金的化学分析.镍的分光光度测定	(Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of nickel.)
NF A06-619-1984	镁和镁合金的化学分析.硅的比色法测定	(Chemical analysis of magnesium and magnesium alloys. Colorimetric determination of silicon.)
NF A06-622-1984	镁和镁合金的化学分析.锰的分光光度测定	(Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of manganese.)
NF A06-624-1984	镁和镁合金的化学分析.锆的分光光度测定	(Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of zirconium.)
NF A06-650-1992	钛及钛合金的化学分析.氢含量的测定	(CHEMICAL ANALYSIS OF TITANIUM AND TITATIUM ALLOYS. DETERMINATION OF HYDROGEN CONTENT.)
NF A06-651-1992	钛及钛合金的化学分析.氧含量的测定	(CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETERMINATION OF OXYGEN CONTENT.)
NF A06-653-1993	钛及钛合金的化学分析.铁含量测定.分子汲收光谱测定法	(CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETERMINATION OF IRON CONTENT. MOLECULAR ABSORPTION SPECTROMETRY METHOD.)
NF A06-654-1993	钛合金的化学分析.氮含量测定.滴定法	(CHEMICAL ANA LYSIS OF TITANIUM ALLOYS. DETERMINATION OF NITROGEN CONTENT. TITRIMETRIC METHOD.)
NF A06-655-1993	钛及钛合金的化学分析.硅含量测定.重力测量法	(CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETERMINATION OF SILICON CONTENT. GRAVIMETRIC METHOD.)
NF A06-656-1993	钛合金的化学分析.TI-AI-V中钒含量的测定.滴定法	(CHEMICAL ANALYSIS OF TITANIUM ALLOYS. DETERMINATION OF VANADIUM CONTENT IN TI-AI-V ALLOY. TITRIMETRIC METHOD.)
NF A06-657-1993	钛及钛合金的化学分析.在TI-AI-ZR合金中的锆含量的测定.带有溴扁桃酸重力测量法	(CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETERMINATION OF ZIRCONIUM CONTENT IN TI-AI-ZR ALLOY. GRAVIMETRIC METHOD WITH BROMOMANDELIC ACID.)
NF A06-701-1967	铜和铜合金的化学分析.溶解.铜的电解测定.铅的分离	(CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. DISSOLVING ELECTROLYTIC DETERMINATION OF COPPER LEAD SEPARATION.)
NF A06-707-1967	铜和铜合金的化学分析.铅的电解测定	(CHEMICAL ANALYQIS OF COPPER AND ITS ALLOYS. ELECTROLYTIC DETERMINATION OF LEAD.)
NF A06-709-1986	铜和铜合金.锑含量的测定.若丹明B(Rhondamine B)光谱测定法	(Copper and copper alloys. Determination of antimony content. Rhodamine B spectrometric method.)
NF A06-710-1987	铜和铜合金的化学分析.镍的测定.分子吸收分光光度法	(Chemical analysis of copper and copper alloys. Determination of nickel content. Molecular absorption spectrophotometric method.)
NF A06-711-1987	铜和铜合金的化学分析.铁含量的测定.分子吸收分光光度法	(Chemical analysis of copper and copper alloys. Determination of iron content. Molecular absorption spectrophotometric method.)
NF A06-712-1986	铜和铜合金.铋含量的测定.二乙基二硫代氨基甲酸盐光谱测定法	(Copper and copper alloys. Determination of bismuth content. Diethyldithiocarbamate spectrometric method.)
NF A06-713-1970	铜和铜合金的化学分析.硅的分光光度测定	(CHEMICAL ANALYSIS OF COPPER AND ITS ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF SILICON.)
NF A06-714-1968	铜和铜合金的化学分析.铝的分光光度测定	(CHEMICAL ANALYSIS OF COPPER AND ITS ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF ALUMINIUM.)
NF A06-715-1968	铜和铜合金的化学分析.锡的分光光度测定	(CHEMICAL ANALYSIS OF COPPER AND ITS ALLOYS. SPECTROPHOTOMETRIC DETERMINATIONOF TIN.)
NF A06-716-1970	铜和铜合金的化学分析.锰的分光光度测定	(CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF MANGANESE.)
NF A06-717-1983	铜和铜合金的化学分析.砷的分光光度测定	(Chemical analysis of copper and copper alloys. Spectrophotometric determination of arsenic.)
NF A06-718-1986	铜和铜合金.磷含量的测定.分子吸收分光光度法	(Copper and copper alloys. Determination of phosphorus content. Molecular absorption spectrophotometric method.)
NF A06-719-1986	铜和铜合金.硫含量的测定.燃烧后的滴定法	(Copper and copper alloys. Determination of sulfur content. Combustion titrimetric method.)
NF A06-731-1986	铜合金.铁含量的测定.二乙二胺四乙酸钠滴定法	(Copper alloys. Determination of iron content. Na2EDTA titrimetric method.)
NF A06-750-1983	铜合金的化学分析.镍的测定.重量分析法	(Chemical analysis of copper alloys. Determination of nickel content. Gravimetric method.)
NF A06-751-1975	铜合金的化学分析.铬总含量的容量测定	(CHEMICAL ANALYSIS OF COPPER ALLOYS. VOLUMETRIC DETERMINATION OF TOTAL CHROMIUM)
NF A06-752-1967	铜合金的化学分析.锌的容量测定	(CHEMICAL ANALYSIS OF COPPER ALLOYS. VOLUMETRIC DETERMINATION OF ZINC.)
NF A06-754-1968	铜合金的化学分析.铝的重量分析法测定	(CHEMICAL ANALYSIS OF COPPER ALLOYS. GRAVIMETRIC DETERMINATION OF ALUMINIUM.)
NF A06-755-1974	铜合金的化学分析.锡的容量测定	(Chemical analysis of copper alloys. Volumetric determination of tin.)
NF A06-759-1975	铜合金的化学分析.铍的重量分析法测定	(CHEMICAL ANALYSIS OF COPPER ALLOYS. GRAVIMETRIC DETERMINATION OF BERYLLIUM)
NF A06-800-1968	锌和锌合金的化学分析.铜的分光光度测定.(Cuprazon法)	(Chemical analysis of zinc and its alloys. Spectrophotometric determination of copper (cuprazon method).)
NF A06-801-1966	锌和锌合金的化学分析.铜的分光光度测定	(CHEMICAL ANALYSIS OF ZINC AND ITS ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF COPPER.)
NF A06-821-1967	锌合金的化学分析.铜的电解测定	(CHEMICAL ANALYSIS OF ZINC ALLOYS. ELECTROLYTIC DETERMINATION OF COPPER.)
NF A06-823-1967	锌合金的化学分析.铁的分光光度测定	(CHEMICAL ANALYSIS OF ZINC ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF IRON.)
NF A06-826-1968	锌合金的化学分析.镁的滴定分析的测定	(CHEMICAL ANALYSIS OF ZINC ALLOYS. TITRIMETRIC DETERMINATION OF MAGNESIUM.)
NF A06-827-1968	锌合金的化学分析.钛的分光光度测定	(CHEMICAL ANALYSIS OF ZINC ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF TITANIUM.)
NF A06-840-1998	锌和锌合金.光学发射光谱分析	(ZINC AND ZINC ALLOYS. OPTICAL EMISSION SPECTROMETRIC ANALYSIS. (EUROPEAN STANDARD EN 12019).)
NF A06-841-1-2002	锌及锌合金.化学分析.第1部分:锌合金中铝的测定.滴定法	(Zinc and zinc alloys - Chemical analysis - Part 1: determination of aluminium in zinc alloys - Titrimetric method.)
NF A06-841-2-2002	锌及锌合金.化学分析.第2部分:锌合金中镁的测定.火焰原子吸收光谱法	(Zinc and zinc alloys - Chemical analysis - Part 2 : determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method.)
NF A06-841-2/A1-2003	锌及锌合金.化学分析.第2部分:锌合金中镁的测定.火焰原子吸收光谱测定法	(Zinc and zinc alloys - Chemical analysis - Part 2 : determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method.)
NF A06-841-3-2002	锌及锌合金.化学分析.第3部分:铅、镉、铜的测定.火焰原子吸收光谱法	(Zinc and zinc alloys - Chemical analysis - Part 3 : determination of lead, cadmium and copper - Flame atomic absorption spectrometric method.)
NF A06-841-4-2003	锌及锌合金.化学分析.第4部分:锌合金中铁的测定.分光光度法	(Zinc and zinc alloys - Chemical analysis - Part 4 : determination of iron in zinc alloys - Spectrophotometric method.)
NF A06-841-5-2003	锌及锌合金.化学分析.第5部分:用分光光度法测定原生锌中铁的含量	(Zinc and zinc alloys - Chemical analysis - Part 5 : determination of iron by spectrophotometry in primary zinc.)
NF A06-841-6-2003	锌及锌合金.化学分析.第6部分:用火焰原子吸收光谱法测定铝和铁的含量	(Zinc and zinc alloys - Chemical analysis - Part 6 : determination of aluminium and iron by atomic absorption spectrometry.)
NF A06-901-1966	锡和锡合金的化学分析.铜的分光光度测定	(CHEMICAL ANALYSIS OF TIN AND ITS ALLOYS. SPECTROPHOTOMETRICDETERMINATION OF COPPER.)
NF A06-998-1960	印刷用合金的化学分析	(CHEMICAL ANALYSIS OF PRINTING ALLOYS.)
NF A06-999-1950	锡基和铅基的抗摩擦合金的化学分析	(METALLURGY. CHEMICAL ANALYSIS. TIN AND LEAD ANTIFRICTION ALLOYS.)
NF A07-500-1979	铝及其合金的发射光谱分析	(ANALYSIS OF ALUMINIUM AND ITS ALLOYS BY EMISSION SPECTROMETRY.)
NF A07-510-1971	非合金铝的发射光谱分析	(Analysis of non-alloyed aluminium by emission spectrography.)
NF A07-510X2-1975	非合金铝的发射光谱分析	(ANALYSIS OF NON-ALLOYED ALUMINIUM BY EMISSION SPECTROGRAPHY.)
NF A07-515-1971	铝铜合金的发射光谱分析	(ANALYSIS OF ALUMINIUM COPPER ALLOYS BY EMISSION SPECTROGRAPHY.)
NF A07-520-1971	铝硅及铝硅铜合金的发射光谱分析	(ANALYSIS OF ALUMINIUM SILICON AND ALUMINIUM-SILICON-COPPER ALLOYS BY EMISSION SPECTROGRAPHY.)
NF A07-822-1954	铸压用锌合金的化学分析.锡的分光光度测定	(CHEMICAL ANALYSIS OF ZINC ALLOYS FOR DIE-CASTING. SPECTROGRAPHIC DETERMINATION OF TIN.)
NF A08-001-1979	轻金属及合金的化学分析.原子吸收光谱法在铝、镁及其合金分析中的应用	(CHEMICAL ANALYSIS OF LIGHT METALS AND ALLOYS. APPLICATION OF ATOMIC ABSORPTION SPECTROMETRY TO THE ANALYSIS OF ALUMINIUM,MAGNESIUM AND THEIR ALLOYS.)
NF A08-450-1979	铅合金的化学分析.锑的测定(原子吸收法)	(CHEMICAL ANALYSIS OF LEAD ALLOYS. DETERMINATION OF ANTIMONY (ATOMIC ABSORPTION METHOD).)
NF A08-547-1979	铝及其合金的化学分析.铅的测定.原子吸收法	(CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYS. DETERMINATION OF LEAD. ATOMIC ABSORPTION METHOD.)
NF A08-553-1979	铝及其合金的化学分析.锌的测定.原子吸收法	(CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYS. DETERMINATION OF ZINC. ATOMIC ABSORPTION METHOD.)
NF A08-556-1979	铝及其合金的化学分析.铬的测定.原子吸收法	(CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYS. DETERMINATION OF CHROMIUM. ATOMIC ABSORPTION METHOD.)
NF A08-563-1974	铝合金的化学分析.锑的测定(原子吸收法)	(CHEMICAL ANALYSIS OF ALUMINIUM ALLOYS. DETERMINATION OF ANTIMONY. (ATOMIC ABSORPTION METHOD).)
NF A08-568-1974	铝合金的化学分析.锡的测定(原子吸收法)	(CHEMICAL ANALYSIS OF ALUMINIUM ALLOYS. DETERMINATION OF TIN. (ATOMIC ABSORPTION METHOD).)
NF A08-650-1992	钛及钛合金的化学分析.用火焰原子吸收光谱法测定TA6V合金内铝、钒和铁的含量	(CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETEMINATION OF ALUMINIUM, VANADIUM AND IRON CONTENTS IN THE TA6V ALLOY BY FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY.)
NF A08-651-1993	钛及铝合金的化学分析.用火焰原子吸收光谱及等离子排放光谱法测定TA6V合金内低合金的元素含量的测定	(CHEMICAL ANALYSIS OF TITANIUM AND ALUMINIUM ALLOYS. DETERMINATION OF ELEMENTS CONTENTS IN LOW CONTENT IN THE TA6V ALLOY. METHOD BY FLAME ATOMATIC ABSORPTION SPECTROMETRY OR BY PLASMA EMISSION SPECTROMETRY.)
NF A08-707-1983	铜合金.铅的测定.火焰原子吸收光谱测定法	(COPPER ALLOYS. DETERMINATION OF LEAD CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.)
NF A08-709-1983	铜合金的化学分析.锑的测定.原子吸收光谱测定法	(CHEMICAL ANALYSIS OF COPPER ALLOYS. DETERMINATION OF ANTIMONY CONTENT. ATOMIC ABSORPTION SPECTROMETRY METHOD.)
NF A08-710-1986	铜和铜合金.镍的测定.火焰原子吸收光谱测定法	(Copper and copper alloys. Determination of nickel content. Flame atomic absorption spectrometric method.)
NF A08-711-1986	铜和铜合金.铁的测定.火焰原子吸收光谱测定法	(Copper and copper alloys. Determination of iron content. Flame atomic absorption spectrometric method.)
NF A08-714-1983	铜和铜合金.铝的测定.火焰原子吸收光谱测定法	(Copper and copper alloys. Determination of aluminium content. Flame atomic absorption spectrometric method.)
NF A08-715-1985	铜和铜合金的化学分析.锡的测定.火焰原子吸收光谱测定法	(CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. DETERMINATION OF TIN CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.)
NF A08-716-1985	铜和铜合金的化学分析.锰的测定.火焰原子吸收光谱测定法	(CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. DETERMINATION OF MANGANESE CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.)
NF A08-720-1985	铜和铜合金的化学分析.钴的测定.火焰原子吸收光谱测定法	(CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. DETERMINATION OF COBALT CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.)
NF A08-724-1983	铜合金.镉的测定.火焰原子吸收光谱测定法	(COPPER ALLOYS. DETERMINATION OF CADMIUM CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.)
NF A08-751-1983	铜和铜合金.铬的测定.火焰原子吸收光谱测定法	(COPPER AND COPPER ALLOYS. DETERMINATION OF CHROMIUM CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.)
NF A08-759-1974	铜合金的化学分析.铍的测定(原子吸收法)	(CHEMICAL ANALYSIS OF COPPER ALLOYS. DETERMINATION OF BERYLLIUM. (ATOMIC ABSORPTION METHOD).)
NF A08-825-1973	锌合金的化学分析.铝的测定(原子吸收法)	(CHEMICAL ANALYSIS OF ZINC ALLOYS. DETERMINATION OF ALUMINIUM. (ATOMIC ABSOPTION METHOD).)
NF A08-901-1991	镍合金.火焰原子吸收光谱测定分析法.第1部分:一般要求和样品溶解	(NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 1 : GENERAL REQUIREMENTS AND SAMPLE DISSOLUTION.)
NF A08-902-1991	镍合金.火焰原子吸收光谱测定分析法.第2部分:钴含量测定	(NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 2 : DETERMINATION OF COBALT CONTENT.)
NF A08-903-1991	镍合金.火焰原子吸收光谱测定分析法.第3部分:铬含量测定	(NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 3 : DETERMINATION OF CHROMIUM CONTENT.)
NF A08-904-1991	镍合金.火焰原子吸收光谱测定分析法.第4部分:铜含量测定	(NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 4 : DETERMINATION OF COPPER CONTENT.)
NF A08-905-1991	镍合金.火焰原子吸收光谱测定分析法.第5部分:铁含量测定	(NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 5 : DETERMINATION OF IRON CONTENT.)
NF A08-906-1991	镍合金.火焰原子吸收光谱测定分析法.第6部分:锰含量测定	(NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 6 : DETERMINATION OF MANGANESE CONTENT.)
NF A10-003-1967	铁合金和硅合金的化学分析.碳的重量法测定	(CHEMICAL ANALYSIS OF FERRO-ALLOYS AND SILICO-ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.)
NF A10-0031-1968	铁合金和硅合金的化学分析.碳的重量法测定.第1次修改	(CHEMICAL ANALYSIS OF FERRO-ALLOYS AND SILICO-ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.)
NF A10-0032-1969	铁合金和硅合金的化学分析.碳的重量法测定.第2次修改	(CHEMICAL ANALYSIS OF FERROUS ALLOYS AND SILICON ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.)
NF A10-0033-1970	铁合金和硅合金的化学分析.碳的重量法测定.第3次修改	(CHEMICAL ANALYSIS OF FERROUS ALLOYS AND SILICON ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.)
NF A10-0034-1971	铁合金和硅合金的化学分析.碳的重量法测定.第4次修改	(CHEMICAL ANALYSIS OF FERROUS ALLOYS AND SILICON ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.)
NF A10-101-1976	硅铁合金.硅锰铁合金及硅铬铁合金的化学分析.硅的重量法测定	(CHEMICAL ANALYSIS OF FERROSILICON,FERROSILICOMANGANESE AND FERROSILICOCHROMIUM. DETERMINATION OF SILICON. GRAVIMETRIC METHOD.)
NF A10-186-1977	铁合金的化学分析.硅铁合金中铝含量的测定.原子吸收光谱法	(CHEMICAL ANALYSIS OF FERROALLOYS. DETERMINATION OF ALUMINIUM IN FERROSILICON. ATOMIC ABSORPTION SPECTROMETRIC METHOD.)
NF A10-621-1992	镍、镍铁和镍合金.硫的测定.通过在感应炉内燃烧后的红外线吸收法	(Nickel, ferronickel and nickel alloys. Determination of sulfur content. Infra-red absorption method after induction furnace combustion.)
NF A10-622-1992	镍、镍铁和镍合金.硫的测定.感应炉内燃烧后碘量滴定法	(Nickel, ferronickel and nickel alloys. Determination of sulfur content. Iodimetric titration method after induction furnace combustion.)
NF A10-656-1968	镍铁合金的化学分析.镍钴总含量的电解法测定	(CHEMICAL ANALYSIS OF FERRO-NICKEL. ELECTROLYTIC DETERMINATION OF TOTAL NICKEL + COBALT.)
NF A10-954-1972	钒铁合金的化学分析.分光光度法测定磷含量	(CHEMICAL ANALYSIS OF FERRO-VANADIUM. SPECTROPHOTOMETRIC DETERMINATION OF PHOSPHORUS.)
NF A11-103-1977	铌铁合金的化学分析.X射线荧光光谱法测定铌含量	(CHEMICAL ANALYSIS OF FERRONIOBIUM. DETERMINATION OF NIOBIUM BY X RAY FLUORESCENCE SPECTROMETRY.)
NF A13-010-1974	铁合金.硅铁.规范	(FERRO-ALLOYS. FERROSILICON. REQUIREMENTS.)
NF A13-020-1975	铁合金.锰铁.规范	(FERRO-ALLOYS. FERRO-MANGANESE. SPECIFICATIONS)
NF A13-030-1976	铁合金.硅锰铁.规范	(FERRO-ALLOYS. FERROSILICOMANGANESE. SPECIFICATIONS.)
NF A13-040-1976	铁合金.铬铁.规范	(FERRO-ALLOYS. FERROCHROMIUM. SPECIFICATIONS.)
NF A13-050-1976	铁合金.硅铬铁.规范	(FERRO-ALLOYS. FERROSILICOCHROMIUM. SPECIFICATIONS.)
NF A13-602-1992	铁镍合金球.分析取样	(FERRONICKEL SHOT. SAMPLING FOR ANALYSIS. (EUROPEAN STANDARD EN 28409).)
NF A32-060-2001	铸造产品.泵、阀门和配件用铸钢件和镍合金铸件(内部部件和防护壳体)	(Foundry products - Cast steel and nickel alloy castings for pumps, valves and fittings (enclosures and internal components).)
NF A35-051-1-1995	拉拔和/或冷轧用非合金钢棒.第1部分:一般要求	(Non-alloy steel rod for drawing and/or cold rolling. Part 1 : general requirements.)
NF A35-051-2-1995	拉拔和/或冷轧用非合金钢棒.第2部分:一般用途钢棒的专门要求	(Non-alloy steel rod for drawing and/or cold rolling. Part 2 : specific requirements for general purposes rod.)
NF A35-051-3-1995	拉拔和/或冷轧用非合金钢棒.第3部分:沸腾和沸腾代用低碳钢棒	(NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 3 : SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE LOW CARBON STEEL ROD. (EUROPEAN STANDARD EN 10016-3).)
NF A35-051-4-1995	拉拔和/或冷轧用非合金钢棒.第4部分:特殊用途钢棒的专门要求	(NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 4 : SPECIFIC REQUIREMENTS FOR ROD FOR SPECIAL APPLICATIONS. (EUROPEAN STANDARD EN 10016-4).)
NF A35-052-1987	钢铁产品.带改进粘附性的焊接钢丝网和钢丝用非合金钢线材	(Iron and steel. Unalloyed steel wire rod for welded fabric and wire with improved adherence.)
NF A35-053-1984	钢铁产品.热成型或低温成型制造产品用非合金钢线材.型号	(Iron and steel. Non-alloy steel wire rod for products made by hot or cold forming. Types.)
NF A35-055-1984	钢铁产品.涂药焊条用非合金钢线材.等级和型号	(Iron and steel. Wire rod in non-alloy steel for coated electrodes. Grades and types.)
NF A35-056-1984	钢铁产品.气体保护电弧焊和潜弧焊的焊条用合金钢和非合金钢线材.等级和型号	(Iron and steel. Wire rod in non-alloy and alloy steel for colled electrodes for gas shielded are welding and submerged arc welding. Grades and types.)
NF A35-057-1979	钢铁产品.冷成形高强度机械弹簧钢丝制造用非合金钢线材.型号	(IRON AND STEEL. WIRE RODS MADE OF UNALLOYED STEEL FOR THE MANUFACTURE OF HIGH RESISTING COLD-FORMED SPRING WIRES. TYPES.)
NF A35-501-1993	非合金结构钢的热钆产品.交货技术条件	(Hot-rolled products of non alloy structural steels. Technical delivery conditions.)
NF A35-520-1-1995	非合金钢热轧板桩.第1部分:交货技术条件	(Hot rolled sheet piling of non alloy steels. Part 1 : technical delivery conditions.)
NF A35-552-2-1997	淬火钢和回火钢.第2部分:非合金优质钢交货技术条件	(Quenched and tempered steels. Part 2 : technical delivery conditions for unaloyed quality steels.)
NF A35-558-1999	具有特殊高温和/或低温性能的紧固件用钢和镍合金	(Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.)
NF A35-567-1984	冶金产品.高负载重型机械结构用渗碳合金钢.牌号.半成品和棒材	(IRON AND STEEL. CASE HARDENED ALLOY STEELS FOR SOLID HIGHLY-STRESSED MECHANICAL PARTS. GRADES. SEMI-FINISHED PRODUCTS AND BARS.)
NF A35-578-2003	耐蠕变的镍和钴合金钢	(Creep resisting steels, nickel and cobalt alloys.)
NF A35-579-1998	内燃机合金和钢材	(Valve steels and alloys for internal combustion engines.)
NF A35-584-1999	耐热钢及镍合金	(HEAT RESISTING STEELS AND NICKEL ALLOYS. (EUROPEAN STANDARD EN 10095).)
NF A36-205-2-2003	压力容器用扁平钢轧材.第2部分:具有规定高温性能的非合金钢与合金钢	(Flat products made of steels for pressure purposes - Part 2 : non-alloy and alloy steels with specified elevated temperature properties.)
NF A36-205-4-2003	压力容器用扁平钢轧材.第4部分:具有规定低温特性的镍合金钢	(Flat products made of steels for pressure purposes - Part 4 : nickel alloy steels with specified low temperature properties.)
NF A36-345-1991	冶金产品.铝合金薄板,薄板和卷材	(IRON AND STEEL. ALUMINIUM COATED SHEET. CUT LENGTHS AND COILS.)
NF A36-602-1988	锅炉和压力容器用可焊钢制锻件.钼、锰钼和铬钼合金钢.质量等级和类型	(WELDABLE STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. MO,MN-MO AND CR-MO ALLOY STEELS. GRADES AND TYPES.)
NF A36-606-1982	锅炉和压力容器用焊接钢冲压锻件.钼、锰钼和铬钼合金钢.牌号和型号	(Weldable steel drop forged articles for boilers and pressure vessels. Mo, Mn/Mo and Cr/Mo alloy steels. Grades and types.)
NF A36-630-2-1999	一般工程用可拆模钢锻件.第2部分: 非合金优质钢和特殊钢	(Open die steel forgings for general engineering purposes - Part 2 : non-alloy quality and special steels.)
NF A36-630-3-1999	一般工程用可拆模钢锻件.第3部分:特殊合金钢	(Open die steel forging for general engineering purposes - Part 3 : alloy special steels.)
NF A36-703-2002	包装用钢.用于接触人和动物消费的食品、产品和饮料的扁钢制品.镀铬非合金钢	(Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non alloy steel chromium coated.)
NF A36-712-1-2002	非包装钢.用于接触人和动物消耗的食品、饲料、产品和饮料的涂金属的扁钢制品.第1部分:涂锌或锌合金(非不锈)	(Unpackaged steels - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Part 1 : zinc or zinc alloy coated (non-stainles)
NF A36-712-2-2002	非包装钢.用于接触人和动物消耗的食品、饲料、产品和饮料的涂金属的扁钢制品.第1部分:涂锌或锌合金(非不锈)	(Unpackaged steels - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Part 2 : Aluminium coated or aluminium-silicium)
NF A36-715-2003	未包装钢.与人和动物用食品、产品和饮料接触的长的钢制品.未镀涂、非不锈、非合金和合金钢	(Unpackaged steels - Long steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Uncoated, non stainless, unalloyed and alloyed steels.)
NF A37-201-1-1995	非合金钢冷成形板垛.第1部分:交货技术条件	(Cold formed sheet piling of non alloy steels. Part 1 : technical delivery conditions.)
NF A37-402-1983	冶金产品.易切削非合金和低合金及冷加工标准钢主要钢号的彩色标志	(IRON AND STEEL. COLOUR MARKING OF THE MAIN NON ALLOY AND LOW ALLOY,COLD-SIZED FREE-CUTTING STEEL GRADES.)
NF A37-601-1-1999	电缆或远程通信电缆用锌或锌合金镀膜非合金钢线.第1部分:陆地电缆(欧洲标准EN10257-1)	(Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Part 1 : land cables.)
NF A37-601-2-1999	电缆或远程通信电缆用锌或锌合金镀膜非合金钢线.第2部分:海底电缆(欧洲标准EN10257-2)	(Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Part 2 : submarine cables.)
NF A37-602-2-2001	钢丝和丝产品.钢丝上的非有色金属涂层.第2部分:锌或锌合金涂层	(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2 : zinc or zinc alloy coatings.)
NF A37-604-2-2002	钢丝和钢丝产品.绳索用钢丝.第2部分:一般绳索用的冷拉非合金钢丝	(Steel wire and wire products - Steel wire for ropes - Part 2 : cold drawn non alloy steel wire for ropes for general applications.)
NF A37-604-3-2003	钢丝和钢丝产品.绳索用钢丝.第3部分:重型装置用圆形和异型非合金钢丝	(Steel wire and wire products - Steel wire for ropes - Part 3 : round and shaped non alloyed steel wire for high duty applications.)
NF A37-611-1-2001	机械弹簧用钢丝.第1部分:铅淬火冷拉制非合金弹簧钢丝	(Steel wire for mechanical springs - Part 1 : patented cold drawn unalloyed spring steel wire.)
NF A45-051-1984	冶金产品.非合金钢线材.公差	(Iron and steel. Wire rod in non-alloy steel. Tolerances.)
NF A47-301-1976	钢铁产品.弹簧用非铅浴淬火合金硬质钢制三股圆钢丝	(IRON AND STEEL. ROUND SPRING STEEL WIRES. PATENTED DRAWN SPRING WIRES OF HARD UNALLOYED STEELS.)
NF A49-031-1979	钢管.弯曲半径.非合金钢管最小推荐值	(STEEL TUBES. BENDING RADII. RECOMMENDED MINIMUM VALUES FOR UNALLOYED STEEL TUBES.)
NF A49-150-2003	包括人类生活用水在内的水成液的传送用非合金钢管和管接头.技术交货条件	(Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.)
NF A49-192-1981	钢管.压力容器用内螺纹非合金钢焊接套管	(STEEL TUBES. WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE EQUIPMENT.)
NF A49-200-1-2002	无缝压力钢管.交货技术条件.第1部分:规定室温特性的非合金钢管	(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.)
NF A49-200-2-2002	无缝压力钢管.交货技术条件.第2部分:规定高温特性的非合金和合金钢管	(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2 : non-alloy and alloy steel tubes with specified elevated temperature properties.)
NF A49-200-3-2002	无缝压力钢管.交货技术条件.第3部分:合金细晶粒结构钢管	(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.)
NF A49-200-4-2002	无缝压力钢管.交货技术条件.第4部分:规定低温特性的合金和非合金钢管	(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4 : non-alloy and alloy steel tubes with specified low temperature properties.)
NF A49-201-1-2002	焊接压力钢管.交货技术条件.第1部分:规定室温特性的非合金钢管	(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.)
NF A49-201-2-2002	焊接压力钢管.交货技术条件.第2部分:规定高温特性的电焊合金和非合金钢管	(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2 : electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.)
NF A49-201-3-2002	焊接压力钢管.交货技术条件.第3部分:合金细晶粒结构钢管	(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.)
NF A49-201-5-2002	焊接压力钢管.交货技术条件.第5部分:规定高温特性的埋弧焊接非合金和合金钢管	(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5 : submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties.)
NF A49-201-6-2002	焊接压力钢管.交货技术条件.第6部分:规定低温特性的埋弧焊接非合金钢管	(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6 : submerged arc welded non-alloy steel tubes with specified low temperature properties.)
NF A49-285-1982	钢管.有质量要求的非合金或合金钢制对缝焊接椭圆底座.尺寸.交货技术条件	(Steel tubes. Unalloyed or alloy steel butt welding elliptic caps with quality requirements. Dimensions. Technical delivery conditions.)
NF A49-289-1990	钢管.用于高低温条件下的对缝焊接管状配件.非合金、合金和不锈钢.尺寸.技术交货条件	(Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.)
NF A49-296-1983	钢管.带质量要求的熔焊非合金或合金钢制等径或缩径焊接三通管.尺寸.交货技术条件	(Steel tubes. Unalloyed or alloy steel butt welding tees made by saw process with equal or reduced branches, with quality requirements. Dimensions. Technical delivery conditions.)
NF A49-313-1-2003	机械工程与综合工程学用无缝环形钢管.交货技术条件.第1部分:非合金和合金钢管	(Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1 : non-alloy and alloy steel tubes.)
NF A49-502-1-1994	非合金和细精粒结构钢的热成型结构空心型材.第1部分:交货技术要求	(Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 1 : technical delivery requirements.)
NF A49-502-2-1997	非合金和细晶粒结构钢的热成型结构空心截面.第2部分:公差、尺寸和截面特性	(Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 2 : tolerances, dimensions and sectional properties.)
NF A49-540-1-1997	非合金细晶粒结构钢的冷成形焊接结构空心型材.第1部分:交货技术要求	(Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 1 : technical delivery requirements.)
NF A49-540-2-1997	非合金细晶粒结构钢的冷成形结构空心型材.第2部分:公差.尺寸和分段性能	(Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 2 : tolerances, dimensions and sectional properties.)
NF A50-001-1-1998	铝和铝合金.条款和定义.第1部分:一般条款	(Aluminium and aluminium alloys. Terms and definitions. Part 1 : general terms.)
NF A50-001-3-2003	铝及铝合金.术语和定义.第3部分:废料	(Aluminium and aluminium alloys - Terms and definitions - Part 3 : scrap.)
NF A50-100-1994	锻铝和铝合金.用于生产与食品接触的材料和物品的金属的化学成分	(Aluminium and aluminium alloys. Wrought products. Chemical composition of semi-products used for the fabrication or articles for use in contact with food.)
NF A50-110-1-2003	铝和铝合金.废料.第1部分:一般要求、取样和试验	(Aluminium and aluminium alloys - Scrap - Part 1 : general requirements, sampling and tests.)
NF A50-110-10-2003	铝和铝合金.废料.第10部分:使用过的铝制饮料罐组成的废料	(Aluminium and aluminium alloys - Scrap - Part 10 : scrap consisting of used aluminium beverage cans.)
NF A50-110-11-2003	铝和铝合金.废料.第11部分:铝铜散热器废料	(Aluminium and aluminium alloys - Scrap - Part 11 : scrap consisting of aluminium-copper radiators.)
NF A50-110-12-2003	铝和铝合金.废料.第12部分:一种合金组成的车床切屑	(Aluminium and aluminium alloys - Scrap - Part 12 : turnings consisting of one single alloy.)
NF A50-110-13-2003	铝和铝合金.废料.第13部分:两种或多种合金组成的混合切屑	(Aluminium and aluminium alloys - Scrap - Part 13 : mixed turnings consisting of two or more alloys.)
NF A50-110-14-2003	铝和铝合金.废料.第14部分:旧的铝制包装件组成的废料	(Aluminium and aluminium alloys - Scrap - Part 14 : scrap from post-consumer aluminium packagings.)
NF A50-110-15-2003	铝和铝合金.废料.第15部分:去除涂层的旧铝包装件废料	(Aluminium and aluminium alloys - Scrap - Part 15 : decoated aluminium scrap from post-consumer aluminium packagings.)
NF A50-110-16-2003	铝和铝合金.废料.第16部分:浮渣、碎屑、小金属棒和金属粒子组成的废料	(Aluminium and aluminium alloys - Scrap - Part 16 : scrap consisting of skimmings, drosses, spills and metallics.)
NF A50-110-2-2003	铝和铝合金.废料.第2部分:非合金铝废料	(Aluminium and aluminium alloys - Scrap - Part 2 : unalloyed aluminium scrap.)
NF A50-110-3-2003	铝和铝合金.废料.第3部分:导线和电缆废料	(Aluminium and aluminium alloys - Scrap - Part 3 : wire and cable scrap.)
NF A50-110-4-2003	铝和铝合金.废料.第4部分:由一种可锻合金组成的废料	(Aluminium and aluminium alloys - Scrap - Part 4 : scrap consisting of one single wrought alloy.)
NF A50-110-5-2003	铝和铝合金.废料.第5部分:同系列两种或多种可锻合金组成的废料	(Aluminium and aluminium alloys - Scrap - Part 5 : scrap consisting of two or more wrought alloys of the same series.)
NF A50-110-6-2003	铝和铝合金.废料.第6部分:两种或多种可锻合金组成的废料	(Aluminium and aluminium alloys - Scrap - Part 6 : scrap consisting of two or more wrought alloys.)
NF A50-110-7-2003	铝和铝合金.废料.第7部分:铸件组成的废料	(Aluminium and aluminium alloys - Scrap - Part 7 : scrap consisting of castings.)
NF A50-110-8-2003	铝和铝合金.废料.第8部分:铝分离工艺中切碎工艺产生的有色金属材料组成的废料	(Aluminium and aluminium alloys - Scrap - Part 8 : scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes.)
NF A50-110-9-2003	铝和铝合金.废料.第9部分:有色金属碎料的铝分离工艺产生的废料	(Aluminium and aluminium alloys - Scrap - Part 9 : scrap from aluminium separation processes of non-ferrous shredded materials.)
NF A50-120-2000	铝和铝合金.锻造产品.生产压力器件的产品的特殊要求	(Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment.)
NF A50-125-2003	铝及铝合金.电工用铝薄板材、带材和板材	(Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications.)
NF A50-150-1-2002	铝和铝合金.船用锻造和铸造产品:第1部分:规范	(Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1 : specifications.)
NF A50-181-1970	铝和铝合金.薄带和箔金属薄片.机械试验.拉力、冲压、崩裂	(ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. MECHANICAL TESTS.)
NF A50-261-1977	铝和铝合金.薄带钢和金属薄片.物理试验、铝带多孔性、可湿性、厚度.铝带附着力	(ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. PHYSICAL TESTS.)
NF A50-400-1994	铝和铝合金.半连续铸造轧制铸锭	(ALUMINIUM AND ALUMINIUM ALLOYS. ROLLING INGOTS. SPECIFICATIONS. (EUROPEAN STANDARD EN 487).)
NF A50-421-1994	锻铝和铝合金钢材,带材和板材.第2部分:机械性能	(Aluminium and aluminium alloys. Sheet, strip and plate. Part 2 : mechanical properties.)
NF A50-422-2003	铝和铝合金.带材、薄板和板材.第3部分:热轧制品的尺寸和外形公差	(Aluminium and aluminium alloys - Sheet, strip and plate - Part 3 : tolerances on dimensions and form for hot-rolled products.)
NF A50-425-1998	轻金属及其合金.危险产品传输箱构造可焊接产品	(ALUMINIUM AND ALUMINIUM ALLOYS. WELDABLE PRODUCTS FOR THE CONSTRUCTION OF TANKS FOR THE TRANSPORTATION OF DANGEROUS GOODS.)
NF A50-430-1995	铝和铝合金.一般用途的圆制品和圆坯的规格	(Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications.)
NF A50-431-1995	铝和铝合金.烹调器具生产用圆坯料.规范	(Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications.)
NF A50-432-1997	铝和铝合金.通用盘绕涂层的薄板和带材.规范	(ALUMINIUM AND ALUMINIUM ALLOYS. COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS. SPECIFICATIONS. (EUROPEAN STANDARD EN 1396).)
NF A50-433-1997	铝和铝合金.踏脚板.规范(欧洲标准EN 1386)	(ALUMINIUM AND ALUMINIUM ALLOYS. TREAD PLATE. SPECIFICATIONS. (EUROPEAN STANDARD EN 1386).)
NF A50-434-1-1998	铝及铝合金.一般用途再轧坯料.第1部分:热轧制再轧坯料规范	(ALUMINIUM AND ALUMINIUM ALLOYS. REROLL STOCK FOR GENERAL APPLICATIONS. PART 1 : SPECIFICATIONS FOR HOT-ROLLED REROLL STOCK. (EUROPEAN STANDARD EN 12482-1).)
NF A50-434-2-1998	铝及铝合金.一般用途再轧坯料.第2部分:冷轧制再轧坯料规范	(ALUMINIUM AND ALUMINIUM ALLOYS. REROLL STOCK FOR GENERAL APPLICATIONS. PART 2 : SPECIFICATIONS FOR COLD-ROLLED REROLL STOCK. (EUROPEAN STANDARD EN 12482-2).)
NF A50-435-1996	铝及铝合金.试验方法.板材和带材的凸耳试验	(ALUMINIUM AND ALUMINIUM ALLOYS. TEST METHODS. EARING TEST FOR SHEET AND STRIP. (EUROPEAN STANDARD EN 1669).)
NF A50-437-1995	铝和铝合金.罐头、盒子和盖子的轧制品	(Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications.)
NF A50-440-1996	铝和铝合金.薄金属片.第1部分:检验和交货的技术条件	(Aluminium and aluminium alloys. Foil. Part 1 : technical conditions for inspection and delivery.)
NF A50-441-1996	铝和铝合金.第2部分:机械性能	(Aluminium and aluminium alloys. Foil. Part 2 : mechanical properties.)
NF A50-442-1996	铝和铝合金.薄金属片.第3部分:尺寸公差	(Aluminium and aluminium alloys. Foil. Part 3 : tolerances on dimensions.)
NF A50-443-1997	铝和铝合金.薄金属片.第4部分:特性要求	(ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. PART 4 : SPECIAL PROPERTY REQUIREMENTS. (EUROPEAN STANDARD EN 546-4).)
NF A50-452-1984	铝和铝合金.板状或带状涂漆产品.特性	(Aluminium and aluminium alloys. Coil coating strip and sheet. Characteristics.)
NF A50-461-1996	铝及铝合金.散热片坯料.第2部分:机械性能	(ALUMINIUM AND ALUMINIUM ALLOYS. FINSTOCK. PART 2 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN 683-2).)
NF A50-462-1996	铝及铝合金.散热片坯料.第3部分:尺寸和形状公差	(ALUMINIUM AND ALUMINIUM ALLOYS. FINSTOCK. PART 3 : TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 683-3).)
NF A50-470-1-2003	铝和铝合金.结构性铁路设施用制品.检查和交货的技术条件.第1部分:挤压制品	(Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1 : extruded products.)
NF A50-506-1982	铝和铝合金.用滚压机和压弯机冷成形型材.一般特性	(Aluminium and aluminium alloys. Cold formed sections produced by cold rolling and by bending. General characteristics.)
NF A50-510-1994	铝和铝合金.从锻制产品中获取的冲击挤压加工用铝块.规范	(Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specifications.)
NF A50-600-1994	铝和铝合金.适于挤压的挤压铸坯	(ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUSION INGOTS. SPECIFICATIONS. (EUROPEAN STANDARD EN 486).)
NF A50-616-1998	铝和铝合金.冷拉棒/棍和管.第7部分:无缝管.尺寸,公差和形状(欧洲标准EN754-7)	(Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 7 : seamless tubes, tolerances on dimensions and form.)
NF A50-617-1998	铝及铝合金.冷拔棒材/条材和管材.第8部分:多孔拉拔管尺寸和形状公差	(ALUMINIUM AND ALUMINIUM ALLOYS. COLD DRAWN ROD/BAR AND TUBE. PART 8 : PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 754-8).)
NF A50-620-2004	铝及铝合金.通用冷拉制圆盘管.规范	(Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification.)
NF A50-632-1995	铝和铝合金.挤压棒材/管材和型材.第三部分:挤压圆形棒材.尺寸和形状公差	(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 3 : round bars, tolerances on dimensions and form.)
NF A50-633-1995	铝和铝合金.挤压棒材/管材和型材.第四部分:挤压方形条材尺寸和形状和公差	(ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED ROD/BAR, TUBE AND PROFILES. PART 4 : SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 755-4).)
NF A50-634-1995	铝和铝合金.挤压棒材/管材和型材.第五部分:挤压矩形棒材. 尺寸和形状公差	(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 5 : rectangular bars, tolerances on dimensions and form.)
NF A50-635-1995	铝和铝合金.挤压棒材,管材和型材.第六部分:挤压六角形条材.尺寸和形状公差	(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 6 : hexagonal bars, tolerances on dimensions and form.)
NF A50-636-1999	铝和铝合金.挤压棍棒,管和截面图.第7部分:无缝管尺寸公差和形状(欧洲标准EN755-7)	(Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 7 : seamless tubes, tolerances on dimensions and form.)
NF A50-637-1998	铝和铝合金.挤压棍/棒材,管和靠模.第8部分:钻头出水口管,尺寸和框架公差	(ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED ROD/BAR, TUBE AND PROFILES. PART 8 : PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 755-8).)
NF A50-638-9-2001	铝和铝合金.挤制棒材/杆材、管及型材.第9部分:型材的尺寸和形状公差	(Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9 : profiles, tolerances on dimensions and form.)
NF A50-640-1-2001	铝及铝合金.挤制合金EN AW-6060 and EN AW-6063精密型材.第1部分:检验和交货技术条件	(Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1 : technical conditions for inspection and delivery.)
NF A50-640-2-2001	铝及铝合金.挤制合金EN AW-6060 and EN AW-6063精密型材.第2部分:尺寸和形状公差	(Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2 : tolerances on dimensions and form.)
NF A50-645-2004	铝及铝合金.通用挤制圆盘管.规范	(Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification.)
NF A50-650-2-1997	铝和铝合金.挤压棒材.电气设备的特殊要求	(Aluminium and aluminium alloys. Drawing stock. Part 2 : specific requirements for electrical applications.)
NF A50-650-4-1997	铝和铝合金.挤压棒材.焊接设备的特殊要求	(Aluminium and aluminium alloys. Drawing stock. Part 4 : specific requirements for welding applications.)
NF A50-701-1982	铝和铝合金.拉制线材.根据成分分类	(Aluminium and aluminium alloys. Extruded and drawn products. Division into groups according to chemical composition.)
NF A50-703-1984	铝和铝合金.拉制方形棒材.尺寸公差和推荐尺寸	(Aluminium and aluminium alloys. Square section extruded bars. Dimensional tolerances and recommended dimensions.)
NF A50-706-1987	铝和铝合金.Ｌ型截面拉制型材.尺寸公差和推荐尺寸	(Aluminium and aluminium alloys. Angles. Dimension and form tolerances.)
NF A50-707-1981	铝和铝合金.Ｉ型截面拉制型材.尺寸公差和推荐尺寸	(Aluminium and aluminium alloys. Extruded shapes : I beams. Tolerances and dimensions.)
NF A50-708-1982	铝和铝合金.Ｔ型截面拉制型材.尺寸公差和推荐尺寸	(Aluminium and aluminium alloys. Extruded shape : tees. Tolerances and dimensions.)
NF A50-709-1981	铝和铝合金.Ｕ型截面拉制型材.尺寸公差和推荐尺寸	(Aluminium and aluminium alloys. Extruded shapes ; channels. Tolerances and dimensions.)
NF A50-802-1988	铝和铝合金.大直径焊接管.尺寸和公差	(ALUMINIUM AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED TUBES. DIMENSIONS AND TOLERANCES.)
NF A50-821-1971	铝和铝合金.冷滚轧成形型材.尺寸和尺寸公差	(ALUMINIUM AND ALUMINIUM ALLOYS. COLD FORMED SECTIONS PRODUCED BY COLD ROLLING. DIMENSIONS AND TOLERANCES.)
NF A50-910-1997	铝及铝合金.铸锻造坯料.第1部分:检查和交货技术条件(欧洲标准EN 604-1)	(ALUMINIUM AND ALUMINIUM ALLOYS. CAST FORGING STOCK. PART 1 : TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. (EUROPEAN STANDARD EN 604-1).)
NF A50-911-1997	铝及铝合金.铸锻造坯料.第2部分:尺寸和形状公差(欧洲标准EN 604-2)	(ALUMINIUM AND ALUMINIUM ALLOYS. CAST FORGING STOCK. PART 2 : TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 604-2).)
NF A50-920-1996	铝及铝合金.锻造坯料.第1部分:检验和交货的技术条件	(ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT FORGING STOCK. PART 1 : TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. (EUROPEAN STANDARD EN 603-1).)
NF A50-921-1996	铝及铝合金.锻造坯料.第2部分:机械性能	(ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT FORGING STOCK. PART 2 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN 603-2).)
NF A50-922-2000	铝及铝合金.锻造坯料.第3部分:尺寸和形状公差	(Aluminium and aluminium alloys - Wrought forging stock - Part 3 : tolerances on dimensions and form.)
NF A50-931-1994	锻铝和铝合金锻件.第2部分:机械特性和附加特性要求	(Aluminium and aluminium alloys. Forgings. Part 2 : mechanical properties and additional property requirements.)
NF A50-932-3-2002	铝和铝合金.锻造.第3部分:尺寸和形式公差	(Aluminium and aluminium alloys - Forgings - Part 3 : tolerances on dimensions and form.)
NF A51-050-1983	铜和合金.铜的分类	(Copper and alloys. Classification of coppers.)
NF A51-080-1991	形状记忆合金.词汇和测量	(SHAPE MEMORY ALLOYS (SMA). VOCABULARY AND MEASURES.)
NF A51-090-1999	铜及铜合金.带材弹性弯折极限的测定	(Copper and copper alloys. Determination of spring bending limit on strip.)
NF A51-102-1999	铜和铜合金.热交换器用的无缝圆管	(Copper and copper alloys. Seamless, round tubes for heat exchangers.)
NF A51-103-1999	铜和铜合金.无缝铜毛圆管	(Copper and copper alloys. Seamless, round copper capillary tubes.)
NF A51-118-1998	铜和铜合金.铜拉制杆材(线材)	(Copper and copper alloys - Copper drawing stock (wire rod).)
NF A51-120-1996	铜和铜合金.无缝的.应用于环境卫生和加热的水和气体的圆形铜管( 欧洲标准EN1057)	(Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications.)
NF A51-121-2003	铜和铜合金.带固体覆层的预绝缘铜管	(Copper and copper alloys - Pre-insulated copper tubes with solid covering.)
NF A51-125-1999	铜及铜合金.一般用途的无缝圆管	(Copper and copper alloys - Seamless, round tubes for general purposes.)
NF A51-126-1-2001	铜和铜合金.空气调节和制冷用无缝圆形铜管.第1部分:管道系统用管	(Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1 : tubes for piping systems.)
NF A51-126-2-2001	铜和铜合金.空气调节和制冷用无缝圆形铜管.第2部分:设备用管	(Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2 : tubes for equipment.)
NF A51-127-2001	铜和铜合金.医用气体或真空用的无缝圆铜管	(Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum.)
NF A51-128-2002	铜和铜合金.电器用无缝铜管	(Copper and copper alloys - Seamless copper tubes for electrical purposes.)
NF A51-129-1999	铜和铜合金.热交换器用无缝轧制翅翼管	(Copper and copper alloys - Rolled, finned seamless tubes for heat exchangers.)
NF A51-201-1998	铜和铜合金.一般用途的板材、薄板、带材和圆材	(Copper and copper alloys - Plate, sheet, strip and circles for general purposes.)
NF A51-202-1998	铜和合金铜.煮水器,压力容器和热水贮存器用的盘状,片状,带状,和环状铜和铜合金	(Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units.)
NF A51-202/A1-2000	铜和合金铜.煮水器、压力容器和热水贮存器用的板状、片状和环状铜和铜合金	(Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels, and hot water storage units.)
NF A51-203-1998	铜和铜合金.弹簧和连接器用带材	(Copper and copper alloys - Strip for springs and connectors.)
NF A51-204-1998	铜和铜合金.导架用带材	(Copper and copper alloys - Strip for lead frames.)
NF A51-205-2002	铜及铜合金.热浸镀锡带	(Copper and copper alloys - Hot-dip tinned strip.)
NF A51-300-1997	铜及铜合金.一致性声明	(Copper and copper alloys. Declarations of conformity.)
NF A51-301-1998	铜和铜合金.一般用途棒材	(Copper and copper alloys - Rod for general purposes.)
NF A51-302-1998	铜和铜合金.切削加工用棒	(Copper and copper alloys - Rod for free machining purposes.)
NF A51-302/A1-2002	铜和铜合金.高速切削用棒材	(Copper and copper alloys - Rod for free machining purposes.)
NF A51-303-1998	铜和铜合金.可锻和未锻的锻料	(Copper and copper alloys - Wrought and unwrought forging stock.)
NF A51-304-1998	铜和铜合金.一般用途线材	(Copper and copper alloys - Wire for general purposes.)
NF A51-305-1998	铜和铜合金.一般用途型材和矩形棒材	(Copper and copper alloys - Profiles and rectangular bar for general purposes.)
NF A51-306-1998	铜和铜合金.切削加工用空心棒	(Copper and copper alloys - Hollow rod for free machining purposes.)
NF A51-306/A1-2002	铜和铜合金.高速切削用中空棒材	(Copper and copper alloys - Hollow rod for free machining purposes.)
NF A51-307-2003	铜和铜合金.焊接和钎焊用棒材和线材	(Copper and copper alloys - Rod and wire for welding and braze welding.)
NF A51-309-2002	铜和铜合金.生产电导体用拉制圆铜丝	(Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors.)
NF A51-310-2002	铜和铜合金.电子管、半导体器件和真空设施用高传导性的铜制产品	(Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications.)
NF A51-311-2002	铜和铜合金.电气设备用铜制型材和异型金属丝	(Copper and copper alloys - Copper profiles and profiled wire for electrical purposes.)
NF A51-430-1996	铜和铜合金.建筑用薄板及带材(欧洲标准EN 1172)	(COPPER AND COPPER ALLOYS. SHEET AND STRIP FOR BUILDING PURPOSES. (EUROPEAN STANDARD EN 1172).)
NF A51-600-1999	铜及铜合金.废钢	(COPPER AND COPPER ALLOYS. SCRAP. (EUROPEAN STANDARD EN 12861).)
NF A53-702-2003	铜和铜合金.主合金	(Copper and copper alloys - Master alloys.)
NF A53-704-1998	铜和铜合金.铜阴极(欧洲标准EN 1978)	(COPPER AND COPPER ALLOYS. COPPER CATHODES. (EUROPEAN STANDARD EN 1978).)
NF A53-705-1999	铜和铜合金.铸块和铸件	(Copper and copper alloys - Ingots and castings.)
NF A53-706-1998	铜和铜合金.铸造未最后成形铜产品(欧洲标准EN 1976)	(COPPER AND COPPER ALLOYS. CAST UNWROUGHT COPPER PRODUCTS. (EUROPEAN STANDARD EN 1976).)
NF A54-101-1974	镍和镍合金.非合金镍轧制产品	(NICKEL AND NICKEL ALLOYS. ROLLED PRODUCTS IN NON-ALLOYED NICKEL.)
NF A54-301-1973	镍和镍合金.具有延伸特征的铁镍合金	(NICKEL AND NICKEL ALLOYS. IRON-NICKEL ALLOYS WITH PARTICULAR DILATABILITY.)
NF A54-401-1973	镍和镍合金.镍钼合金与镍钼铬合金	(NICKEL AND NICKEL ALLOYS. NICKEL-MOLYBDENUM AND NICKEL-MOLYBDENUM-CHROMIUM-ALLOYS.)
NF A55-110-2003	锌和锌合金.初级锌	(Zinc and zinc alloys - Primary zinc.)
NF A55-111-2003	锌和锌合金.二次利用的锌	(Zinc and zinc alloys - Secondary zinc.)
NF A55-112-1998	锌和锌合金.取样方法.规范	(ZINC AND ZINC ALLOYS. METHOD OF SAMPLING. SPECIFICATIONS. (EUROPEAN STANDARD EN 12060).)
NF A55-210-1996	锌及锌合金.建筑物用轧制平板制品规范	(Zinc and zinc alloys. Specifications for rolled flat products for building.)
NF A55-300-1997	锌和锌合金.锌合金压制铸件.铸块和液体	(Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid.)
NF A55-999-2003	铅和铅合金.废料.术语和定义	(Lead and lead alloys - Scraps - Terms and definitions.)
NF A56-101-1985	减摩作用白合金锭.特性	(ANTIFRICTION ALLOY INGOTS. CHARACTERISTICS.)
NF A56-102-1995	锡及锡合金.锡锭	(TIN AND TIN ALLOYS. INGOT TIN. (EUROPEAN STANDARD EN 610).)
NF A56-103-1-1995	锡及锡合金.铅锡合金和铅锡合金器皿.第1部分:铅锡合金	(Tin and tin alloys. Pewter and pewterware. Part 1 : pewter.)
NF A56-103-2-1996	锡及锡合金.铅锡合金和铅锡合金器皿.第2部分:铅锡合金器皿	(TIN AND TIN ALLOYS. PEWTER AND PEWTERWARE. PART 2 : PEWTERWARE. (EUROPEAN STANDARD EN 611-2).)
NF A57-100-1994	铸铝合金.用于生产与食品接触的材料和物品的金属的化学成分	(Aluminium and aluminium alloys. Castings. Chemical composition of castings for use in contact with food.)
NF A57-110-1995	铝和铝合金.液体金属.规范	(ALUMINIUM AND ALUMINIUM ALLOYS. LIQUID METAL. SPECIFICATIONS. (EUROPEAN STANDARD EN 577).)
NF A57-130-1996	铝及铝合金.冶炼用合金锭.规范(欧洲标准EN 1676)	(Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications.)
NF A57-140-1995	铝和铝合金.通过熔化制造的母合金.规范	(Aluminium and aluminium alloys. Master alloys produced by melting. Specifications.)
NF A57-220-1998	铝和铝合金.铸件.化学成分和机械性能(欧洲标准EN 1706)	(Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties.)
NF A57-501-1998	镁和镁合金.铸造阳极用镁合金	(Magnesium and magnesium alloys. Magnesium alloys for cast anodes.)
NF A57-502-1998	镁和镁合金.非合金镁	(Magnesium and magnesium alloys. Unalloyed magnesium.)
NF A58-002-1999	铅及铅合金.电缆护套和套筒用铅合金锭	(Lead and lead alloys - Lead alloys ingots for electric cable sheathing and for sleeves.)
NF A58-003-1999	铅及铅合金.建筑物用薄铅板	(Lead and lead alloys. Rolled lead sheet for building purposes.)
NF A58-004-2000	铅及铅合金.铅氧化物	(Lead and lead alloys - Lead oxides.)
NF A65-767-1981	镁合金制半成品.Ｕ形型材.尺寸公差和推荐尺寸	(Semi-finished products made of magnesium alloys. U-sections. Tolerances on dimensions and recommended dimensions.)
NF A66-001-1985	铸造产品.有色金属和合金.重力、低压和减压模铸件的尺寸公差	(Foundry products. Non ferrous metal and alloys. Cast products. Dimensional tolerances for gravity die castings, low pressure die castings and depression die castings.)
NF A66-002-1985	铸造产品.铝合金和锌合金.压力铸件的尺寸公差	(Foundry products. Aluminium alloys and zinc alloys. Cast products. Dimensional tolerances for pressure die castings.)
NF A70-020-1993	珠宝.贵金属合金的纯度	(JEWELLERY. FINENESS OF PRECIOUS METAL ALLOYS. (EUROPEAN STANDARD EN 29202).)
NF A70-021-2001	贵金属.与贵金属珠宝合金一起使用的钎料的精细度	(Precious metals - The finenesses of solders used with precious metal jewellery alloys.)
NF A80-230-1-1998	焊接和合金过程.金属材料几何缺陷的分类.第1部分:熔焊(欧洲标准6520-1)	(Welding and allied processes. Classification of geometric imperfections in metallic materials. Part 1 : fusion welding.)
NF A81-309-1995	焊接可熔化性.非合金和低合金钢的手工金属弧焊接用药皮焊条	(Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification.)
NF A81-311-1994	碳钢、碳锰钢和微合金钢的气体金属电弧焊丝状电极和电积物的分类	(Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification.)
NF A81-325-1997	焊条.非合金钢和细晶粒钢制惰性气体保护钨焊接用棒材,线材和镀层	(WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).)
NF A81-331-1984	焊接、硬钎焊和硬焊铝及铝合金用填充金属材料.符号.规范	(Filler materials for welding, brazing and braze welding aluminium and aluminium alloys. Symbolization. Specifications.)
NF A81-350-1997	焊条.非合金钢及细粒钢的有和无气体保护的金属电弧焊接用管状焊丝.分类(欧洲标准EN 758)	(Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non aloy and fine grain steels. Classification.)
NF A81-363-1994	软钎料合金.化学成分和供货形式	(SOFT SOLDER ALLOYS. CHEMICAL COMPOSITIONS AND FORMS. (EUROPEAN STANDARD EN 29453).)
NF A81-410-1984	铝和铝合金.焊接、硬钎焊和钎焊.基础产品和焊条的选择	(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING,BRAZING AND BRAZE WELDING. BASE MATERIALS AND SELECTION OF FILLER MATERIALS.)
NF A81-900-1973	铝和铝合金.焊接.焊剂的使用和检查	(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. USE AND TESTING OF WELDING FLUXES.)
NF A87-010-1973	铝和铝合金.焊接.边的准备	(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. WELD PREPARATIONS.)
NF A87-013-3-2001	焊接和相关工艺.接头预处理的推荐方法.第3部分:铝和铝合金的金属焊条惰性气体保护焊和钨极惰性气体保护焊	(Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.)
NF A88-110-2-1992	焊工合格鉴定.熔焊.第2部分:铝及铝合金件	(Approval testing of welders. Fusion welding. Part 2 : aluminium and aluminium alloys.)
NF A88-110-3-1999	焊工合格鉴定.熔焊.第3部分:铜及铜合金件	(Approval testing of welders. Fusion welding. Part 3 : copper and copper alloys.)
NF A88-110-4-1999	焊工合格鉴定.熔焊.第4部分:镍和镍合金	(Approval testing of welders. Fusion welding. Part 4 : nickel and nickel alloys.)
NF A88-110-5-2000	焊工的验收试验.熔焊.第5部分:钛和钛合金.锆和锆合金	(Approval testing of welders - Fusion welding - Part 5 : titanium and titanium alloys, zirconium and zirconium alloys.)
NF A89-101-4-2000	焊接.金属材料焊接的推荐方法.第4部分:铝和铝合金的电弧焊	(Welding - Recommendations for welding of metallic materials - Part 4 : arc welding of aluminium and aluminium alloys.)
NF A89-220-1973	铝和铝合金.焊接.分类和焊接点的检验	(ALUMINIUM AND ALLOY THEREOF. WELDING. CLASSIFICATION AND TESTING OF WELDED JOINTS.)
NF A89-232-1994	铝和可焊合金的弧焊接头.质量缺陷等级导则	(ARC-WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 30042).)
NF A89-234-2001	焊接.电子和激光束焊接接头.缺陷的质量级别导则.第1部分:铝及其可焊合金	(Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.)
NF A89-310-1973	铝和铝合金.焊接.基本元件的连接.选择原则	(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. ELEMENTARY TYPES OF ASSEHBLY. SELECTION CRITERIA.)
NF A91-001-2000	金属和合金防腐蚀.表面处理、金属和其他无机镀层.词汇.	(Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary.)
NF A91-081-1987	金属镀层.锡镍合金电镀层.规范和试验方法	(Metallic coatings. Electroplated coatings of tin-nickel alloy. Specification and test methods.)
NF A91-082-1987	金属镀层.锡铅合金电解沉淀.规范和试验方法	(METALLIC COATINGS. ELECTROPLATED COATINGS OF TIN-LEAD ALLOYS. SPECIFICATION AND TEST METHODS.)
NF A91-091-1987	金属镀层.工业用的银和银合金电解沉淀	(Metallic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes.)
NF A91-092-1-1987	金属镀层.电解银和电解合金镀层的试验方法.第1部分:镀层厚度的测定	(Metallic coatings. Test methods for electrodeposited silver and silver alloys coatings. Part 1 : determination of coating thickness.)
NF A91-092-2-1987	金属镀层.电解银和电解合金镀层的试验方法.第2部分:粘附试验	(Metallic coatings. Test methods for electrodeposited silver and silver alloy coatings. Part 2 : adhesion tests.)
NF A91-094-1987	金属镀层.工业用金和镀金合金电镀层	(Metallic coatings. Electrodeposited gold and gold alloy coatings for engineering purposes.)
NF A91-095-1-1987	金属镀层.金和金合金镀层试验方法:第1部分:镀层厚度的测定	(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : determination of coating thickness.)
NF A91-095-2-1987	金属镀层.金和金合金镀层试验方法:第2部分:环境试验	(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : environmental tests.)
NF A91-095-3-1995	金属镀层.金及金合金电镀层的试验方法.第3部分:孔隙率的阳极电解试验	(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 3 : electrographic tests for porosity.)
NF A91-095-4-1987	金属镀层.金和金合金镀层试验方法:第4部分:金含量的测定	(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 4 : determination of gold content.)
NF A91-095-5-1987	金属镀层.金和金合金镀层试验方法:第5部分:粘附试验	(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 5 : adhesion tests.)
NF A91-095-6-1995	金属镀层.电镀金和金合金镀层的测试方法.第6部分:残留盐类的测定	(Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 6 : determination of the presence of residual salts.)
NF A91-103-1969	金属镀层.镀镍和镀铬的锌合金零件的验收条件	(Metallic coatings. Acceptance conditions for nickel- and chromium-plated zinc alloy parts.)
NF A91-105-2003	金属覆层.自动催化(无电)的镍磷合金覆层.规范和试验方法	(Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods.)
NF A91-214-1999	热喷镀.自熔化合金的熔化和喷镀(EN ISO 14920)	(Thermal spraying. Spraying and fusing of self-fluxing alloys.)
NF A91-400-1987	表面处理.铝及铝合金的阳极极处理.词汇	(Anodizing of aluminium and its alloys. Vocabulary.)
NF A91-401-1966	金属表面处理.铝和铝合金的阳极处理.(阳极氧化).试验方法的名称	(SURFACE TREATMENT OF METALS. ANODISATION (ANODIC OXIDATION) OF ALUMINIUM AND ITS ALLOYS. NOMENCLATURE OF TEST METHODS.)
NF A91-402-1981	铝和铝合金的阳极处理.(阳极氧化).厚度的测量.剖面的显微照相	(Surface treatments of metals. Anodic oxidation of aluminium and its alloys. Thickness measurements.)
NF A91-404-1966	金属表面处理.铝和铝合金的阳极处理.(阳极氧化).厚度的测量	(SURFACE TREATMENT OF METALS. ANODIZING (ANODIC OXYDIZING) OF ALUMINIUM AND ITS ALLOYS. MEASUREMENT OF THICKNESS.)
NF A91-407-1981	铝和铝合金的阳极处理.(阳极氧化).通过测量在酸溶液浸泡后重量的损失来进行积砂的检验	(Anodizing of aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution.)
NF A91-408-1985	铝和阳极化的铝合金.沉砂检验.SANODALG兰滴定试验	(Anodized aluminium and aluminium alloys. Assessment of sealing quality. Sanodal “G“ blue drop test.)
NF A91-411-1966	金属表面处理.铝和铝合金的阳极处理.耐腐蚀的检验	(SURFACE TREATMENT OF METALS. ANODISATION (ANODIC OXIDATION) OF ALUMINIUM AND ITS ALLOYS. CHECK OF CORROSION RESISTANCE.)
NF A91-412-1982	铝和铝合金的阳极处理.彩色氧化层耐人造光的加速试验	(Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxide coatings to artificial light.)
NF A91-420-1988	表面处理.阳极氧化铝和铝合金.45°镜面反射率.总反射率.成象清晰度	(Surface treatments. Anodized aluminium and aluminium alloys. Specular reflectance at 45 degrees. Total reflectance. Image clarity.)
NF A91-423-1988	表面处理.铝和阳极氧化的铝合金.总反射率的测定.光电反射计法	(Surface treatments. Anodized aluminium and aluminium alloys. Measurement of total reflectivity using a photoelectric reflectometer.)
NF A91-450-1981	铝及其合金的阳极氧化.铝的阳极氧化物镀层的一般规范	(Anodizing of aluminium and its alloys. General specifications for anodic oxide coatings on aluminium.)
NF A91-455-1-2001	铝及铝合金.阳极氧化.第1部分:铝上装饰和保护用阳极氧化覆层的规定方法	(Aluminium and aluminium alloys - Anodizing - Part 1 : method for specifying decorative and protective anodic oxidation coatings on aluminiurm.)
NF A91-455-10-1999	铝和铝合金.阳极化.第10部分:使用磨损喷射试验装置对阳极氧化物镀膜的主要特定磨损抗性的测定	(Aluminium and aluminium alloys. Anodizing. Part 10 : measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus.)
NF A91-455-11-2000	铝和铝合金.阳极化.第11部分:在20度、45度、60度或85度时测定阳极氧化物涂层的镜面反射和镜面毛重	(Aluminium and aluminium alloys - Anodizing - Part 11 : measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 o, 45 o, 60 o or 85 o.)
NF A91-455-12-2000	铝和铝合金.阳极化.第12部分:用集成球形仪器测量铝表面反射特性	(Aluminium and aluminium alloys - Anodizing - Part 12 : measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments.)
NF A91-455-13-2000	铝和铝合金.阳极化.第13部分:用滤光测角仪测量铝表面反射特性	(Aluminium and aluminium alloys - Anodizing - Part 13 : measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer.)
NF A91-455-14-2000	铝和铝合金.阳极化.第14部分:用肉眼确定阳极氧化物涂层的图像清晰度.图表比例尺法	(Aluminium and aluminium alloys - Anodizing - Part 14 : visual determination of image clarity of anodic oxidation coatings - Chart scale method.)
NF A91-455-15-2000	铝和铝合金.阳极化.第15部分:阳极氧化物涂层抗变形断裂的测定	(Aluminium and aluminium alloys - Anodizing - Part 15 : assessment of resistance of anodic oxidation coatings to cracking by deformation.)
NF A91-455-16-2001	铝及铝合金.阳极氧化.第16部分:阳极氧化覆层连续性检查.硫酸铜试验	(Aluminium and aluminium alloys - Anodizing - Part 16 : check for continuity of thin anodic oxydation coatings - Copper sulfate test.)
NF A91-455-17-2001	铝及铝合金.阳极氧化.第17部分:电介质击穿潜能的测定	(Aluminium and aluminium alloys - Anodizing - Part 17 : determination of electric breakdown potential.)
NF A91-455-18-2001	铝和铝合金.阳极氧化.第18部分:点腐蚀评定用额定值系统.图表法	(Aluminium and aluminium alloys - Anodizing - Part 18 : Rating system for the evaluation of pitting corrosion - Chart method.)
NF A91-455-19-2002	铝及铝合金.阳极氧化.第19部分:斑蚀评定的等级系统.格栅法	(Aluminium and aluminium alloys - Anodizing - Part 19 : rating system for the evaluation of pitting corrosion - Grid method.)
NF A91-455-2-1999	铝和铝合金.阳极化.第2部分:阳极氧化物镀膜单位面积质量的测定(表面密度).重量计法(欧洲标准EN 12373-2)	(Aluminium and aluminium alloys. Anodizing. Part 2 : determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method.)
NF A91-455-3-1999	铝和铝合金.阳极化.第3部分:阳极氧化物镀膜厚度的测定.用分裂束显微镜的非损测量(欧洲标准EN 12373-3)	(Aluminium and aluminium alloys. Anodizing. Part 3 : determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope.)
NF A91-455-5-1999	铝和铝合金.阳极化.第5部分:用验收测量的密封阳极氧化物镀膜质量评估(欧洲标准EN 12373-5)	(Aluminium and aluminium alloys. Anodizing. Part 5 : assessment of quality of sealed anodic oxidation coatings by measurement of admittance.)
NF A91-455-6-1999	铝和铝合金.阳极化.第6部分:通过对未预先进行酸处理的浸入到磷酸/铬酸溶液中的质量损失的测量对密封阳极氧	(Aluminium and aluminium alloys. Anodizing. Part 6 : assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment.)
NF A91-455-7-2002	铝及铝合金.阳极氧化.第7部分:测量经过磷酸和铬酸溶液酸处理浸渍后的质量损失来评定密封阳极氧化覆层的质量	(Aluminium and aluminium alloys - Anodizing - Part 7 : assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solut)
NF A91-455-8-1999	铝和铝合金.阳极化.第8部分:紫外灯和有色阳极氧化物加热镀膜的相对固定性测定.(欧洲标准EN 12373-8)	(Aluminium and aluminium alloys. Anodizing. Part 8 : determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings.)
NF A91-455-9-1999	铝和铝合金.阳极化.第9部分:使用磨擦轮磨损试验的阳极氧化物镀膜的磨损抗性和磨损指数的测定	(Aluminium and aluminium alloys. Anodizing. Part 9 : measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus.)
NF A91-473-2001	锌、镉、铝锌合金和锌铝合金的铬酸盐转化涂层.试验方法	(Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods.)
NF A91-477-2000	金属的防腐蚀.经清洗和没有清洗的铝及铝合金上的铬酸盐转化涂层	(Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys.)
NF A92-020-1990	铝和铝合金用的搪瓷涂层.试样的制备	(VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM AND ALUMINIUM ALLOYS. PREPARATION OF TEST SAMPLES.)
NF A92-021-1990	铝和铝合金用的搪瓷涂层.附着力试验	(VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM AND ALUMINIUM LLOYS. ADHESION TESTS.)
NF A95-121-2002	金属粉末(不包括硬质合金粉末).单轴向压缩时压塑性(压缩性)的测定	(Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression.)
NF A95-323/A1-2003	不包括硬质合金的烧结金属材料.横向断裂强度的测定.修改件1:精确说明	(Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1 : precision statement.)
NF A95-381-1983	粉末烧结.除硬金属以外的烧结钢和烧结合金钢.总碳量和非结合碳量的测定	(Powder metallurgy. Sintered steels and alloys excluding hardmetals. Determination of total carbon and non-combined carbon contents.)
NF A95-421-1983	粉末冶金.硬质合金.洛氏硬度试验(A标试验方法)	(Powder metallurgy. Hardmetals. Rockwell hardness test (A-scale-test method).)
NF A95-490-1993	硬质合金.用X射线荧光法测定金属元素的含量.溶解法	(HARDMETALS. DETERMINATION OF CONTENTS OF METALLIC ELEMENTS BY X-RAY FLUORESCENCE. SOLUTION METHOD. (EUROPEAN STANDARD EN 24883).)
NF A95-492-1-1993	硬质合金.火焰原子吸收光谱法的化学分析.第1部分:一般要求	(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 1 : general requirements.)
NF A95-492-2-1993	硬质合金.火焰原子吸收光谱法的化学分析.第2部分:含量为0.001%-0.02%(m/m)的钙、钾、镁和钠的测定	(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 2 : determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 per cent (m/m).)
NF A95-492-3-1993	硬质合金.火焰原子吸收光谱法的化学分析.第3部分:含量为0.01%-0.5%(m/m)的钴、铁、锰和镍的测定	(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 3 : determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 per cent (m/m).)
NF A95-492-4-1993	硬质合金.火焰原子吸收光谱法的化学分析.第4部分:含量为0.01%-0.5%(m/m)的钼、钛和钒的测定	(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 4 : determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 per cent (m/m).)
NF A95-492-5-1993	硬质合金.火焰原子吸收光谱法的化学分析.第5部分:含量为0.5%-2%(m/m)的钴、铁、锰、钼、镍、钛和钒的测定	(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 5 : determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 per cent (m/m).)
NF A95-492-6-1993	硬质合金.火焰原子吸收光谱法进行化学分析.第6部分:含量为0.01%-2%(m/m)的铬的测定	(Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 6 : determination of chromium in contents from 0,01 to 2 per cent (m/m).)
NF A95-701-1977	粉末冶金.机械零部件自润滑轴承用金属与合金.规范和试验方法的说明	(POWDER METALLURGY.METALS AND ALLOYS FOR MECHANICAL PARTS SELF-LUBRICATING BEARINGS. INTERPRETATION OF SPECIFICATIONS AND TEST METHODS.)
NF A95-711-1977	粉末冶金.机械部件和自润滑轴承用的合金.钢号一般命名规则	(POWDER METALLURGY. ALLOYS FOR MECHANICAL PARTS AND SELF-LUBRICATING BEARINGS. RULES FOR THE CONVETIONAL DESIGNATION OF GRADES.)
NF A95-725-1971	粉末冶金.机械部件用合金.渗透性钢的规范	(POWDER METALLURGY. REQUIREMENTS FOR INFILTRATED STEELS.)
NF A95-731-1971	粉末冶金.机械部件用合金.烧结青铜的规范	(POWDER METALLURGY. REQUIREMENTS FOR SINTERED BRONZES.)
NF A95-732-1971	粉末冶金.机械部件用合金.烧结黄铜的规范	(POWDER METALLURGY. REQUIREMENTS FOR SINTERED BRASS.)
NF C20-130-1987	铜导线用铜或铜合金镶装式裸套管.规则	(Crimp-type copper or copper alloy non-insulated lugs for copper conductors. Requirements.)
NF C28-925-1996	非最终退火装态下非合金钢制冷轧电工钢片和钢带	(Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state.)
NF C28-926-1996	非最终退火装态下合金钢制冷轧电工钢片和钢带	(Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state.)
NF C31-520-1979	电路或仪表盘用铝和铝合金扁条线	(Flat aluminium and aluminium alloys bars for switchboards and electrical wirings (with rounded edges).)
NF C32-051-2003	铅和铅合金.电缆的铅和铅合金护套和套管	(Lead and lead alloys - Lead and lead alloys sheaths and sleeves of electric cables.)
NF C34-112-2001	架空电力导线.铝镁硅合金线	(Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires.)
NF C34-800-1977	架空接触线用铜和镉铜合金制的开槽导线	(BARRES CONDUCTORS.SLOTTED COPPER-CADMIUM WIRES FOR OVERHEAD CONTACT LINES.)
NF C63-061-1973	导线的连接（其中至少一根是铝或铝合金绝缘导线）的连接.电气试验规则	(LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. CONNECTION JOINTS FOR CONDUCTORS. ONE AT LEAST OF THEM BEING AND INSULATED. ALUMINIUM OR ALUMINIUM ALLOY CONDUCTOR. ELECTRICAL TEST REQUIREMENTS.)
NF C64-450-1987	充气式高压开关及控制设备用铝合金浇铸外壳	(Cast aluminium alloy enclosures for gas-filled high-voltage swichtgear and controlgear.)
NF C64-451-1990	高压充气开关和控制装置用铝和铝合金煅制外壳.(欧洲标准 EN 50064)	(Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear.)
NF C64-4511-1993	置于气体压力下的高压装置用铝和铝合金煅制外壳.(欧洲标准 EN 50064).补充件1	()
NF C64-452-1992	充气高压开关和控制设备用锻铝和铸铝合金焊接复合外壳	(Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear.)
NF C64-4521-1993	充气高压开关和控制设备用锻铝和铸铝合金焊接复合外壳.补充件1	()
NF C90-700-1-3-2002	电子组件用连接材料.第1-3部分:电子焊接用电子级钎焊合金及有焊剂和无焊剂的固体焊料的要求	(Attachment materials for electronic assembly - Part 1-3 : requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications.)
NF C93-024-1981	电子元件.自动剥离连接.铜或铜合金导线的试验规范.一般规定	(ELECTRONIC COMPONENTS. INSULATION DISPLACING TERMINATIONS. TEST SPECIFICATION FOR WIRES WITH COPPER OR COPPER ALLOY CONDUCTOR. GENERAL REQUIREMENTS.)
NF C93-771-1996	互连结构用材料.第7部分:限制芯材料分规范组.第1节:铜/铁镊合金/镊铜合金	(Materials for interconnection structures. Part 7 : sectional specification set for restraining core materials. Section 1 : copper/invar/coper.)
NF D29-011-7-2001	与餐具有关的材料和物件.餐具和凹形餐具.第7部分:银制,其他贵重金属和合金制凹形餐桌餐具的特殊要求	(Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7 : requirements for table cutlery made of silver, other precious metals and their alloys.)
NF D36-406-2004	建筑物用阀.建筑物内饮用水给水用手动铜合金和不锈钢球阀.试验和要求	(Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements.)
NF E22-513-1987	滑动轴承.整体铜合金套筒.尺寸与公差	(Plain bearings. Solid copper alloy bushes. Dimensions and tolerances.)
NF E22-551-1992	滑动轴承.多层滑动轴承用的铅和锡铸造合金	(Plain bearings. Lead and tin casting alloys for multilayer plain bearings.)
NF E22-552-1986	滑动轴承.厚壁多层轴承合金底衬的要求	(PLAINS BEARINGS. REQUIREMENTS ON BACKINGS FOR THICK-WALLED MULTILAYER BEARINGS.)
NF E22-553-1992	滑动轴承.铜合金.第1部分:整块的和多层厚壁滑动轴承用铸铜合金	(Plain bearings. Copper alloys. Part 1 : cast copper alloys for solid and multilayer thick-walled plaint bearings.)
NF E22-554-1992	滑动轴承.铜合金.第2部分:整块铜合金滑动轴承用锻铜合金	(Plain bearing. Copper alloys. Part 2 : wrough copper alloys for solid plain bearings.)
NF E22-555-1985	滑动轴承.整体轴承用的铝合金	(Plain bearings. Aluminium alloy for solid bearings.)
NF E25-100-1-1999	碳钢合金制成的紧固件的机械性能.第1部分:螺栓、螺钉和螺柱	(Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.)
NF E29-008-1972	管道.压力和温度.２３％镍和４％锰奥氏体球墨合金铸铁部件	(TEMPERATURE AND PRESSURE LIMITATIONS FOR PIPING SYSTEMS MANUFACTURED FROM 23% NICKEL 4% MANGANESE SPHEROIDAL GRAPHITE AUSTENITIC CAST IRON`.)
NF E29-009-1972	管道.压力和温度.２０％镍和２％铬奥氏体球墨合金铸铁部件	(TEMPERATURE AND PRESSURE LIMITATIONS FOR PIPING SYSTEMS MANUFACTURED FROM 20% NICKEL 2% CHROMIUM SPHEROIDAL GRAPHITE AUSTENITIC CAST IRON`.)
NF E29-043-1990	工业管道工程.管道、锅炉和压力容器法兰组件用非合金钢或合金钢制螺栓	(Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.)
NF E29-200-4-2002	法兰及其连接件.按PN标注的管、阀门、配件和附件用圆形法兰.第4部分:铝合金法兰	(Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4 : aluminium alloy flanges.)
NF E29-207-1986	工业管道.合金钢法兰盘和卡环及复合材料法兰盘.术语，尺寸，规范	(INDUSTRIAL PIPEWORK. COPPER ALLOYS FLANGES AND COLLARS AND COMPOSITE FLANGES. TERMINOLOGY. DIMENSIONS. SPECIFICATIONS.)
NF E29-303-4-2003	阀门.阀体、阀盖和阀套用材料.第4部分:欧洲标准中规定的铜合金	(Valves - Materials for bodies, bonnets and covers - Part 4 : copper alloys specified in European Standards.)
NF E29-334-2003	工业用阀门.铜合金闸阀	(Industrial valves - Copper alloy gate valves.)
NF E29-591-1-1998	铜和铜合金.管道配件.第1部分:铜管毛细管终端焊接配件	(Copper and copper alloys. Plumbing fittings. Part 1 : fittings with ends for capillary soldering or capillary brazing to copper tubes.)
NF E29-591-2-1998	铜和铜合金.管道配件.第2部分:用于铜管的压缩终端配件	(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 2 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES. (EUROPEAN STANDARD EN 1254-2).)
NF E29-591-3-1998	铜和铜合金.管道配件.第3部分:用于塑料管的压缩终端配件	(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES. (EUROPEAN STANDARD EN 1254-3).)
NF E29-591-4-1998	铜和铜合金.管道配件.第4部分:用毛细或压缩终端连接于其它终端的配件	(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 4 : FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS. (EUROPEAN STANDARD EN 1254-4).)
NF E29-591-5-1998	铜和铜合金.管道配件.第4部分:铜管毛细管钎焊短末端配件	(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 5 : FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES. (EUROPEAN STANDARD EN 1254-5).)
NF E29-745-2000	便携式气瓶.可再充气的便携式焊接铝合金气瓶的设计和结构规范	(Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders.)
NF E29-762-1990	气瓶.无缝铝合金瓶.腐蚀试验	(GAS VESSELS. ALUMINIUM ALLOY SEAMLESS GAS CYLINDERS. CORROSION TESTS.)
NF E52-031-1987	起重配件.合金钢尖嘴和杆的吊钩	(LIFTING APPLIANCES. SHANK HOOK MADE OF ALLOYED STEEL.)
NF E66-265-1994	有直柄的固体硬质合金端铣刀的尺寸	(SOLID HARDMETAL END MILLS WITH PARALLEL SHANK. DIMENSIONS.)
NF E66-308-1998	有圆柱形固定孔和圆角的可转位硬质合金刀片.尺寸	(Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions.)
NF E66-363-1966	高速钢合金车床刀具.偏刀	(TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET SIDE TURNING TOOLS.)
NF E66-364-1966	高速钢合金车床刀具.倒角车刀	(TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET TURNING TOOLS FOR CORNER WORK.)
NF E66-365-1966	高速钢合金车床刀具.外圆车刀	(STRAIGTH TURNING TOOLS WITH HIGH SPEED TIPS.)
NF E66-366-1966	高速钢合金车床刀具.宽脸方头车刀	(TURNING TOOLS WITH SPEED STEEL INSERTS. WIDE FACE SQUARE NOSE TURNING TOOLS.)
NF E66-367-1966	高速钢合金车床刀具.切槽刀	(TURNING TOOLS WITH SPEED STEEL INSERTS. PARTING OFF TURNING TOOLS.)
NF E66-368-1966	高速钢合金车床刀具.切断车刀	(TURNING TOOLS WITH SPEED STEEL INSERTS. CUTTING OFF TOOLS.)
NF E66-369-1966	高速钢合金车床刀具.车外螺纹刀具	(TURNING TOOLS WITH SPEED STEEL INSERTS. EXTERNAL THREADING TOOLS.)
NF E66-370-1966	高速钢合金车床刀具.镗刀	(TURNING TOOLS WITH SPEED STEEL INSERTS. BORING TOOLS.)
NF E66-371-1966	高速钢合金车床刀具.镗孔端面刀具	(TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL SIDE TURNING TOOLS.)
NF E66-372-1966	高速钢合金车床刀具.扩孔镗刀	(TURNING TOOLS WITH SPEED STEEL INSERTS. RIGHT ANGLE PARTING OFF TURNING TOOLS.)
NF E66-373-1966	高速钢合金车床刀具.车内螺纹刀具	(TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL THREADING TOOLS.)
NF E66-740-1995	硬质合金的镦锻模.术语	(Hardmetal heading dies. Terminology.)
NF E82-110-1982	铝和铝合金模锻零件.供货一般技术条件	(ALUMINIUM AND ALUMINIUM ALLOY DROP FORGINGS. GENERAL TECHNICAL DELIVERY CONDITIONS.)
NF E84-004-1998	栅栏用钢线和线产品.第1部分:锌和锌合金涂覆钢线	(Steel wire and wire products for fences. Part 1 : zinc and zinc-alloy coated steel barbed wire.)
NF E86-031-1989	合金钢或非合金钢立式锅炉设备.支脚	(VERTICAL TANKS OF UNALLOYED AND ALLOY STEEL. SUPPORTING SHOES.)
NF E86-032-1989	合金钢或非合金钢立式锅炉设备.支承壁	(VERTICAL TANKS OF UNALLOYED AND ALLOY STEEL. SKIRTS.)
NF E86-033-1989	非合金钢或合金钢立式锅炉设备.底座	(VERTICAL TANKS OF UNALLOYED AND ALLOY STEEL. SUBPLATES.)
NF F01-810-1990	铁路车辆.非合金钢或低合金钢电弧焊和电阻焊接头.设计与施工规则	(RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES FOR CONCEPTION AND REALIZATION.)
NF F01-820-1992	铁路车辆.车身用铝合金焊接接头(焊缝)	(RAILWAY ROLLING STOCK. WELDED JOINTS OF PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK. CHARACTERIZATION.)
NF F11-042-1994	装空气或氮气用的一般不近火的压力容器.第4部分:用于铁路运输车辆空气制动和辐助气动设备的铝合金压力容器	(Simple unfired pressure vessels designed to contain air or nirogen. Part 4 : aluminium alloy pressure vessels designed for air braking equipment and auxiliary penumatic equipment for railway rolling stock.)
NF F19-303-1996	铁路车辆.铝和铝合金用含水涂料单分子薄膜	(RAILWAY ROLLING STOCK. PAINT MONOCOAT WATERBORNE WITH WATER USED TO ALUMINIUM AND ALUMINIUM`S ALLOIES.)
NF F19-350-1998	铁路滚动存货车.线圈涂层板铝和铝合金	(RAILWAY ROLLING STOCK. COIL COATED SHEETS ALUMINIUM AND ALUMINIUM ALLOYS.)
NF F55-310-1993	铁路固定设备.铝合金信号用柱式支架和门架式结构	(RAILWAY FIXED EQUIPMENT. POST BRACKETS AND PORTAL STRUCTURES FOR SIGNALLING IN ALUMINIUM ALLOY.)
NF F80-105-1982	铁路运输设备.制造铁路车辆推荐使用的钢材.V.适于热处理的锻制非合金钢	(Railway transport equipment. Recommended steels for railway rolling-stock construction. V : unalloyed forging steels suitable for heat treatment.)
NF F80-107-1984	铁路车辆.制造铁路车辆推荐使用的钢材.VII.热处理非合金钢和特种合金钢	(Rolling stock. Recommended steels for stock construction. VII unalloyed and alloy heat treated steels.)
NF F80-153-1986	通用铁路设备.扁平产品的冷弯半径.铝和铝合金板和带喷漆产品的最小弯曲半径	(RAILWAY EQUIPMENT. COLD FOLDING RADII FOR PLAT PRODUCTS. MINIMUM FOLDING RADII FOR LAQUERED SHEETS OR BANDS MADE OF ALUMINIUM AND ALUMINIUM ALLOYS.)
NF F82-001-1990	铁路车辆.车体框架用的可焊接铝合金线材	(RAILWAY ROLLING STOCK. EXTRUDED WELDABLE PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK.)
NF H44-006-1988	烟雾发生器.压力分配用铝和铝合金容器（气雾剂容器型）与膨胀管联系的底部尺寸公差	(AEROSOL DISPENSERS. CONTAINERS IN ALUMINIUM AND ALLOYS. TOLERANCES OF THE FUNDAMENTAL DIMENSIONS IN CONNECTION WITH THE CLINCH.)
NF J13-005-1968	造船.铝和铝合金.轧制和拉制产品.可用合金表	(SHIPBUILDING. ALUMINIUM AND ALUMINIUM ALLOYS. ROLLED AND DRAWN PRODUCTS. LIST OF USEABLE ALLOYS.)
NF J95-046-3-2002	小艇.外壳构造和建材尺寸.第3部分:材料:钢、铝合金、木材和其它材料	(Small craft - Hull constructions and scantlings - Part 3 : materials : steel, aluminium alloys, wood, other materials.)
NF L06-380-20-2003	航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第20部分:均质铝及铝合金组件	(Aerospace series - Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 20 : homogeneous assemblies aluminium and aluminium al)
NF L06-380-21-2003	航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第21部分:均质非合金及低合金钢组	(Aerospace series - Welded and brazed assemblies for aerospace construction - Weldability and beazability of materials - Part 21 : homgeneous assemblies of unalloyed and low alloy steels.)
NF L06-510-1983	航空和航天工业中铝合金数据处理用带尾柄圆柱形双刃铣刀的选择	(Selection of end mills with shanks to be used in aerospace industry for numerical control machining of aluminium alloys.)
NF L07-152-1974	铝合金铆钉直径图形符号的表示	(SYMBOLIC REPRESENTATION ON DRAWINGS OF RIVET DIAMETERS MADE OF ALUMINIUM ALLOYS.)
NF L10-270-1-1993	航空和航天系列.铝和铝合金产品的试验方法.第1部分:锻铝合金产品的导电性测定	(Aerospace series. Test methods for aluminium and aluminium alloy products. Part 1 : determination of electrical conductivity of wrought aluminium alloy products.)
NF L10-270-5-1993	航空和航天系列.铝和铝合金产品的试验方法.第5部分:包层半成品的包层厚度及铜分散度的测定	(Aerospace series. Test methods for aluminium and aluminium alloy products. Part 5 : determination of cladding thickness and copper diffusion of clad semi-finished products.)
NF L10-301-1989	航空和航天系列.钛和钛合金的干喷沙处理	(AEROSPACE SERIES. DRY ABRASIVE BLASTING OF TITANIUM AND TITANIUM ALLOYS. (EUROPEAN STANDARD EN 2497).)
NF L10-302-1998	航空航天系列.规定拉伸强度小于或等于1450MPA的铜、铜合金和镍合金钢的镀镉	(AEROSPACE SERIES. CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH INFERIOR OR EQUAL TO 1450 MPA, COPPER, COPER ALLOYS AND NICKEL ALLOYS. (EUROPEAN STANDARD EN 2133).)
NF L10-307-1997	航空航天系列.耐腐蚀钢的钝化和镍基合金的净化(欧洲标准EN 2516)	(AEROSPACE SERIES. PASSIVATION OF CORROSION RESISTING STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS. (EUROPEAN STANDARD EN 2516).)
NF L10-308-1997	航空航天系列.耐腐蚀钢和耐热合金的电解抛光(欧洲标准EN 3769)	(AEROSPACE SERIES. ELECTROLYTIC POLISHING OF CORROSION RESISTING STEELS AND HEAT RESISTING ALLOYS. (EUROPEAN STANDARD EN 3769).)
NF L10-309-1997	航空和航天系列硫酸铬中铝和铝合金的酸洗	(AEROSPACE SERIES. CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS. (EUROPEAN STANDARD EN 2334).)
NF L10-310-1992	航空航天系列.铝和锻压铝合金的铬酸阳极化	(AEROSPACE SERIES. CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS. (EUROPEAN STANDARD EN 2101).)
NF L10-311-1995	航天航空系列.铝合金的淬硬阳极极化	(AEROSPACE SERIES. HARD ANODIZING OF ALUMINIUM ALLOYS. (EUROPEAN STANDARD EN 2536).)
NF L10-312-1997	航天航空系列.钛及钛合金的阳极极化(欧洲标准EN 2808)	(Aerospace series. Anodizing of titanium and titanium alloys.)
NF L10-315-1992	航空航天系列.铝和锻压铝合金的硫阳极化	(Aerospace series. Sulphuric acid anodizing of aluminium and wrought aluminium alloys.)
NF L10-316-2002	航空航天系列.铝及铝合金用铬酸盐转化膜(黄色)	(Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys.)
NF L10-470-1982	航空和航天制造用铜和铜合金锻制棒材的检验和试验条件	(INSPECTION AND TEST REQUIREMENTS OF WROUGHT BARS IN COPPER AND COPPER ALLOYS FOR AEROSPACE CONSTRUCTION.)
NF L10-471-1983	航空和航天制造用铜和铜合金板材带材的检验和试验条件	(INSPECTION AND TEST REQUIREMENTS OF SHEETS AND STRIPS IN COPPER AND COPPER ALLOYS FOR AEROSPACE CONSTRUCTION.)
NF L10-600-1-1990	航空和航天系列.铝和铝合金锻制半成品.技术规范.第1部分:一般要求	(AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2070-1).)
NF L10-600-11-1993	航空和航天系列.铝和铝合金锻制半成品.技术规范.第1部分:一般要求.补充件1	()
NF L10-600-2-1990	航空和航天系列.铝合铝合金锻制半成品.技术规范.第2部分:薄板、带材、弯曲的型材和厚板	(AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 2 : SHEET,STRIP,FORMED PROFILES AND PLATE. (EUROPEAN STANDARD EN 2070-2).)
NF L10-600-3-1990	航空和航天系列.铝合铝合金锻制半成品.技术规范.第3部分:棒材和型材	(AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 3 : BAR AND SECTION. (EUROPEAN STANDARD EN 2070-3).)
NF L10-600-4-1990	航空和航天系列.铝和铝合金锻制半成品.技术规范.第4部分:结构用管子	(AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PROUDCTS. TECHNICAL SPECIFICATION. PART 4 : TUBE FOR STRUCTURES. (EUROPEAN STANDARD EN 2070-4).)
NF L10-600-5-1990	航空和航天系列.铝合铝合金锻制半成品.技术规范.第5部分:压力管	(AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 5 : TUBE USED UNDER PRESSURE. (EUROPEAN STANDARD EN 2070-5).)
NF L10-600-6-1990	航空和航天系列.铝合铝合金锻制半成品.技术规范.第6部分.铆接线	(AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 6 : RIVET WIRE. (EUROPEAN STANDARD EN 2070-6).)
NF L10-600-7-1990	航空和航天系列.铝合铝合金锻制半成品.技术规范.第7部分:锻工场用的锻造产品	(AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 7 : WROUGHT FORGING STOCK. (EUROPEAN STANDARD EN 2070-7).)
NF L10-601-1-1990	航空和航天系列.铅合金和镁合金铸件和铸锭.技术说明.第1部分:一般要求.(欧洲标准EN 2076-1)	(AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2076-1).)
NF L10-601-11-1993	航空和航天系列.铅合金和镁合金铸件和铸锭.技术说明.第1部分:一般要求.(欧洲标准EN 2076-1).补充件1	()
NF L10-601-2-1990	航空和航天系列.铝合金和镁合金铸件和铸锭.技术说明.第2部分:重熔用锭.(欧洲标准EN 2076-2)	(AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 2 : INGOTS FOR REMELTING. (EUROPEAN STANDARD EN 2076-2).)
NF L10-601-3-1990	航空和航天系列.铅合金和镁合金铸件和铸锭.技术说明.第3部分:标准部件和系列部件.(欧洲标准EN 2076)	(AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION CASTINGS. (EUROPEAN STANDARD EN 2076-3).)
NF L10-602-1-1990	航空和航天系列.锻造产品、锻件和铝合金模锻.技术规范.第１部分：一般要求	(Aerospace series. Aluminium alloy forging stock and forgings. Technical specification. Part 1 : general requirements.)
NF L10-602-11-1993	航空和航天系列. 锻造产品、锻件和铝合金模锻.技术规范.第１部分：一般要求(欧洲标准EN 2082-1的补充件)	()
NF L10-602-2-1990	航空和航天系列.锻造产品、锻件和铝合金模锻.技术规范.第2部分:锻造产品	(Aerospace series. Aluminium alloy forging stock and forgings. Technical specification. Part 2 : forging stock.)
NF L10-602-3-1990	航空和航天系列.锻造产品、锻件和铝合金模锻.技术规范.第3部分:锻件系列和锻件型号	(AEROSPACE SERIES. ALUMINIUM ALLOY FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION FORGINGS. (EUROPEAN STANDARD EN 2082-3).)
NF L10-702-1-1992	航空和航天系列.重熔产品和钢制、镍基和钴基合金制模件.技术规范.第1部分:一般要求.(欧洲标准 EN 2103-1)	(AEROSPACE SERIES. STEEL,NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 1 GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2103-1).)
NF L10-702-2-1992	航空和航天系列.重熔产品和钢制、镍基和钴基合金制模件.技术规范.第2部分:重熔产品.(欧洲标准 EN 2103-2)	(AEROSPACE SERIES. STEEL,NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 2 : REMELTING STOCK. (EUROPEAN STANDARD EN 2103-2).)
NF L10-702-3-1992	航空和航天系列.重熔产品和钢制、镍基和钴基合金制模件.技术规范.第3部分:标准部件及系列部件.(欧洲标准 EN	(AEROSPACE SERIES. STEEL,NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION CASTINGS. (EUROPEAN STANDARD EN 2103-3).)
NF L10-800-1-1994	航空航天系列.钛和钛合金.煅块和煅件.技术规范.第1部分:总要求	(AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOYS. FORGING STOCK AND FORGINS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2858-1).)
NF L10-800-2-1994	航空航天系列.钛和钛合金.煅块和煅件.技术规范.第2部分:锻块	(AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOYS. FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 2 : FORGING STOCK. (EUROPEAN STANDARD EN 2858-2).)
NF L10-800-3-1994	航空航天系列.钛和钛合金.煅块和煅件.技术规范.第3部分:预制煅件和锻件	(AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOYS. FORGING STOCK AND FORGINS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION FORGINGS. (EUROPEAN STANDARD EN 2858-3).)
NF L10-801-1-1995	航空和航天.钛和钛合金预制材料和铸件.交货技术条件.第1部分:一般要求	(AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2545-1).)
NF L10-801-2-1995	航空和航天.钛和钛合金预制材料和铸件.交货技术条件.第2部分:预制材料	(AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 2 : REMELTING STOCK. (EUROPEAN STANDARD EN 2545-2).)
NF L10-801-3-1995	航空和航天.钛和钛合金制预制材料和铸件.交货技术条件.第3部分:试制铸件和系列铸件	(AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION CASTINGS. (EUROPEAN STANDARD EN 2545-3).)
NF L10-805-1993	航空和航天.钛及钛合金碎屑的回收利用	(AEROSPACE SERIES. RECYCLING OF TITANIUM AND TITANIUM ALLOY SCRAP. (EUROPEAN STANDARD EN 2955).)
NF L12-015-2002	航空航天系列.耐热合金加工的圆形棒材.直径D≥10mm 或者≤ 180mm.尺寸	(Aerospace series - Round bars, machined in heat resisting alloys - Diameter D more than or equal to 10 mm and less than or equal to 180 mm - Dimensions.)
NF L12-135-2002	航空航天系列.耐热合金制成的热轧薄板和板材.厚度≥20mm 或者≤100mm.尺寸	(Aerospaces series - Hot rolled sheets and plates in heat resisting alloys - Thickness a more than or equal to 2,0 mm and less than or equal to 100 mm - Dimensions.)
NF L12-610-1968	耐热钢和钢合金半成品冷拉无缝圆钢管.航空和航天工业选用	(SELECTION OF COLD DRAWN SEAMLESS STEEL TUBES OF CIRCULAR CROSS-SECTION FOR THE AEROSPACE INDUSTRY.)
NF L12-612-2002	航空航天系列.耐热合金制成的无缝毛细管.直径≥0.6mm 或者≤ 2mm.尺寸	(Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter D more than or equal to 0,6 mm and less than or equal to 2 mm - Dimensions.)
NF L12-672-2002	航空航天系列.流体用耐热合金制成的圆形管材.直径D≥3.2mm 和≤100mm.尺寸	(Aerospace series - Circular tubes, for fluid in heat resisting alloys - Diameter D more than or equal to 3,2 mm and less than or equal to 100 mm - Dimensions.)
NF L12-812-2002	航空航天系列.耐热合金焊接用填充杆材和填充金属丝.直径≥0.5mm 或者≤5.0mm .尺寸	(Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.)
NF L13-100-1998	航空航天系列.镊基合金NI-B41201(NICR14S15B3C).钎焊金属.粉末和糊剂	(Aerospace series. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Powder or paste.)
NF L13-101-1998	航空航天系列.镊基合金NI-B41201(NICR14S15B3C).钎焊金属.粉末和糊剂.带	(Aerospace series. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Tape.)
NF L13-102-1998	航空航天系列.镊基合金NI-B41201(NICR14S15B3C).钎焊金属.粉末和糊剂.无定型箔	(Aerospace series. Nickel base alloy NI-B41202 (NiCr14Si5B3). Filler metal for brazing. Amorphous foil.)
NF L13-103-2001	航空航天系列.镍基合金NI-B41202(NICR14Fe5Si5B3).钎焊用充填金属.粉末或糊剂	(Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste.)
NF L13-104-2001	航空航天系列.镍基合金NI-B41203(NICR7FeSi5B3).钎焊用充填金属.无定型箔	(Aerospace series - Nickel base alloy NI-B41203 (NiCr7FeSi5B3) - Filler metal for brazing - Amorphous foil.)
NF L13-105-1998	航空航天系列.镊基合金NI-B41201(NICR14S15B3C).铅焊金属.粉末和糊剂.硼化箔	(Aerospace series. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Borided foil.)
NF L13-106-2001	航空航天系列.镍基合金NI-B41203(NICR7Si5B3Fe3)钎焊用充填金属.粉末和糊剂	(Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste.)
NF L13-107-1998	航空航天系列.镊基合金NI-B41203(NICR7S15B3).钎焊金属.带	(Aerospace series. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Tape.)
NF L13-108-2001	航空航天系列.镍基合金NI-B40001(NiSi5B3).钎焊用充填金属.无定型箔	(Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil.)
NF L13-109-2001	航空航天系列.镍基合金NI-B40001(NiSi5B3).钎焊用充填金属.硼化箔	(Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil.)
NF L13-110-2001	航空航天系列.镍基合金NI-B40001(NiSi5B3).钎焊用充填金属.粉末或糊剂	(Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste.)
NF L13-111-1998	航空航天系列.镊基合金NI-B40001(NISI5B3).钎焊金属.带	(Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Tape.)
NF L13-112-2001	航空航天系列.镍基合金NI-B41001(NiCr19Si7B).钎焊用充填金属.无定型箔	(Aerospace series - Nickel base alloy NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil.)
NF L13-113-2001	航空航天系列.镍基合金NI-B31001(NiCr19Si10).钎焊用充填金属.粉末或糊剂	(Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste.)
NF L13-114-1998	航空航天系列.镊基合金NI-B31001(NICR19SI10).钎焊金属.带	(Aerospace series. Nickel base alloy NI-B31001 (NiCr19Si10). Filler metal for brazing. Tape.)
NF L13-115-2001	航空航天系列.镍基合金NI-B13001(NiP11).钎焊用充填金属.无定型箔	(Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil.)
NF L13-116-2001	航空航天系列.镍基合金NI-B13001(NiP11).钎焊用充填金属.粉末和糊状物	(Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Power or paste.)
NF L13-117-2001	航空航天系列.镍基合金NI-B21001(NiCr15B4).钎焊用充填金属.无定型箔	(Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil.)
NF L13-118-2001	航空航天系列.镍基合金NI-B21001(NiCr15B4).钎焊用充填金属.硼化箔	(Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil.)
NF L13-119-2001	航空航天系列.镍基合金NI-B21001(NiCr15B4).钎焊用充填金属.粉末或糊状物	(Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste.)
NF L13-120-2001	航空航天系列.镍基合金NI-B44101(NiW12Cr10Si4Fe3B3).钎焊用充填金属.粉末或糊状物	(Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste.)
NF L13-121-2001	航空系列.镍基合金 Ni-B46001.非晶态箔	(Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Amorphous foil.)
NF L13-122-2001	航空航天系列.镍基合金NI-B46001(NiCo20Si5B3).钎焊用充填金属.粉末或糊剂	(Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste.)
NF L13-123-1998	航空航天系列.镊基合金NI-B46001(NiCo20SI5B3).钎焊金属.带	(Aerospace series. Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Tape.)
NF L13-124-2001	航空航天系列.镍基合金NI-B41204(NICR13Si4B3).钎焊用充填金属.无定型箔	(Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil.)
NF L13-125-2001	航空航天系列.镍基合金NI-B41204(NICR13Si4B3).钎焊用充填金属.硼化箔	(Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil.)
NF L13-126-2001	航空航天系列.镍基合金NI-B41204(NICR13Fe4Si4B3).钎焊用充填金属.粉末或糊剂	(Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste.)
NF L13-127-1998	航空航天系列.镊基合金NI-B41204(NICR13SI4B3).钎焊金属.带	(Aerospace series. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Tape.)
NF L13-128-2001	航空航天系列.镍基合金NI-B48801(NiMn19Si6Cu4B).钎焊用充填金属.粉末或糊剂	(Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste.)
NF L13-129-2001	航空航天系列.镍基合金NI-B15701(NiPd34Au30).钎焊用充填金属.粉末或糊剂	(Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste.)
NF L13-130-1998	航空航天系列.镊基合金NI-B15701(NIPD34AV30).钎焊金属.碾轧箔	(Aerospace series. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Rolled foil.)
NF L13-131-1998	航空航天系列.镊基合金NI-B15701(NIPD34AV30).钎焊金属.线	(Aerospace series. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Wire.)
NF L13-135-2001	航空航天系列.银基合金AG-B10001(AgCu28).钎焊用充填金属.焊丝	(Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire.)
NF L13-136-2001	航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).钎焊用充填金属.焊丝	(Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire.)
NF L13-137-2001	航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).钎焊用充填金属.粉末或糊状物	(Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste.)
NF L13-138-2001	航空航天系列.银基合金AG-B12401(AgCu40Zn5Ni).钎焊用填充金属.卷状箔	(Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil.)
NF L13-139-2001	航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.焊丝	(Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire.)
NF L13-140-2001	航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.粉末或糊状物	(Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste.)
NF L13-141-2001	航空航天系列.银基合金AG-B14001(AgCu42Ni2).钎焊用填充金属.卷状箔	(Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil.)
NF L13-142-2001	航空航天系列.钴基合金CO-B41601(CoCr19Ni17Si8W4).钎焊用填充金属.粉末或糊状物	(Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste.)
NF L13-143-2001	航空航天系列.金基合金AU-B40001(AuNi18).钎焊用填充金属.粉末或糊状物	(Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste.)
NF L13-144-2001	航空航天系列.金基合金AU-B40001.钎焊用填充金属.滚轧箔	(Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Rolled foil.)
NF L13-145-2001	航空航天系列.金基合金AU-B40001.钎焊用填充金属.金属丝	(Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire.)
NF L13-148-2001	航空航天系列.钛合金TI-B17001.钎焊用填充金属.滚轧箔	(Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil.)
NF L13-149-2001	航空航天系列.镍基合金NI-B40002(NiSi4B2).钎焊用填充金属.无定型箔	(Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil.)
NF L13-150-2001	航空航天系列.镍基合金NI-B40002(NiSi4B2).钎焊用填充金属.硼化箔	(Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil.)
NF L13-151-2002	航空航天系列.镍基合金NI-B40002 (NiSi4B2)- 钎焊用填充金属.粉末或焊膏.	(Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Powder or paste.)
NF L13-152-1998	航空航天系列.镊基合金NI-B40002(NISI4B2).钎焊金属.带	(Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Tape.)
NF L13-200-2001	航空航天系列.耐热合金NI-WH1801(NICR20Co18Ti3Al2).焊接用填充金属	(Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding.)
NF L13-201-2001	航空航天系列.耐热合金NI-WH2301(NICR22Fe19Mo9Co2).焊接用填充金属	(Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding.)
NF L13-202-2001	航空航天系列.耐热合金NI-WH2601(NICR19Nb5Mo3Ti).钎焊用填充金属	(Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for brazing.)
NF L13-203-2001	航空航天系列.耐热合金NI-WH3601(NICR22Mo9Nb4).焊接用填充金属	(Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding.)
NF L13-204-2001	航空航天系列.热阻合金NI-WH1303 (NiCo20Cr20Mo5Ti2Al).焊接用金属焊料	(Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding.)
NF L13-205-2001	航空航天系列.耐热合金CO-WH4101(CoCr20W15Ni).焊接用填充金属	(Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding.)
NF L13-206-2001	航空航天系列.耐热合金CO-WH1402(CoCr22Ni22W15).焊接用填充金属	(Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding.)
NF L13-209-2001	航空航天系列.钛合金TI-W640001.焊接用填充金属	(Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding.)
NF L13-210-2002	航空航天系列.钛合金TI-W19001.焊接用填充金属	(Aerospace series - Titanium alloy TI-W19001- Filler metal for welding.)
NF L13-211-2001	航空航天系列.耐热合金NI-WD3201(NiMo25Fe6Cr5).焊接用填充金属	(Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding.)
NF L13-212-2001	航空航天系列.耐热合金NI-WH3901(NiCr16Mo15).焊接用填充金属	(Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding.)
NF L13-215-2002	航空航天系列.铝合金AL-W42201.焊接用填充金属.焊条	(Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod.)
NF L13-216-2001	航空航天系列.耐热合金NI-WH1302(NICR20Co13Mo4Ti3Al).焊接用填充金属.金属丝和金属杆	(Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod.)
NF L13-217-2001	航空航天系列.耐热合金CO-WH4102(CoCr28W20Ni5V1).焊接用填充金属.金属丝和金属杆	(Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod.)
NF L13-218-2001	航空航天系列.耐热合金CO-WH1401(CoCr26Ni11W8).焊接用填充金属.金属丝和金属杆	(Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod.)
NF L13-220-2001	航空航天系列.耐热合金NI-WH0001 (NiCr20).焊接用填充金属.焊丝和焊棒	(Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod.)
NF L13-228-2001	航空航天系列.耐热合金NI-WH8901(NICR16Ti3Mn2).焊接用填充金属.金属丝和金属杆	(Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding - Wire and rod.)
NF L13-229-2001	航空航天系列.耐热合金NI-WH3902 (NICR25Mo10C).焊接用填充金属.焊丝和焊棒	(Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod.)
NF L13-230-2001	航空航天系列.耐热合金CO-WH4001(CoCr29W9).焊接用填充金属.金属丝和金属杆	(Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod.)
NF L13-231-2002	航空航天系列.镁合金钢MG-W68001. 焊接用填充金属.焊丝和焊条	(Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod.)
NF L13-232-2001	航空航天系列.铝合金AL-W46431.焊接用填充金属.金属丝和金属杆	(Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod.)
NF L14-050-1993	航空航天系列.铝合金AL-P6082-T6.200mm以下或等于200mm的挤压棒材和型材A或D	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6082 - T6. EXTRUDED BARS AND SECTIONS A OR D INFERIOR OR EQUAL TO 200 MM. (EUROPEAN STANDARD EN 2326).)
NF L14-051-1994	航空航天系列.铝合金AL-P6082-T6.挤压棒材和型材.a/D≤200mm,周边粗粒控制	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6082-, T6. EXTRUDED BARS AND SECTIONS. A OR D INFERIOR OR EQUAL TO 200 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2636).)
NF L14-181-1993	航空航天系列.铝合金AL-P7009-T74.20mm以下或等于20mm至150mm以下或等于150mm的手工锻材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T74. HAND FORGINGS 20 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2093).)
NF L14-182-1993	航空航天系列.铝合金AL-P7009-T74.3mm以下或等于3mm至150mm以下或等于150mm的模锻材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T74. PIECES MATRICEES 3 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2094).)
NF L14-183-1993	航空航天系列.铝合金AL-P7009-T7452.40mm以下或等于40mm至150mm以下或等于150mm的手工锻材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T7452. HAND FORGINGS 40 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2381).)
NF L14-184-1993	航空航天系列.铝合金AL-P7009-T74511.125mm以下或等于125mm的挤压棒材和型材A或D	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T74511. EXTRUDED BARS AND SECTIONS A OR D INFERIOR OR EQUAL TO 125 MM. (EUROPEAN STANDARD EN 2385).)
NF L14-185-1994	航空航天系列.铝合金AL-P7009-T74511.挤压棒材和型材.a/D≤125mm,周边粗粒控制	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-, T74511. EXTRUDED BARS AND SECTIONS. A OR D INFERIOR OR EQUAL TO 125 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2630).)
NF L14-201-1994	航空航天系列.铝AL-P1050A.H14.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材	(AEROSPACE SERIES. ALUMINIUM AL-P1050A. H14. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2072).)
NF L14-204-1994	航空航天系列.铝合金AL-P7075-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-. T6 OR T62. CLAD SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2092).)
NF L14-207-1993	航空航天系列.铝合金AL-P7075-T651.6mm以下至80mm以下或等于80mm的铝合金板	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075 - T651. PLATES 6 MM INFERIOR TO A INFERIOR OR EQUAL TO 80 MM. (EUROPEAN STANDARD EN 2126).)
NF L14-208-1993	航空航天系列.铝合金AL-P7075-T73511.100mm以下或等于100mm的挤压棒材和型材A或D	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075 - T73511. EXTRUDED BARS AND SECTION A OR D INFERIOR OR EQUAL TO 100 MM. (EUROPEAN STANDARD EN 2127).)
NF L14-209-1993	航空航天系列.铝合金AL-P7075-T7351.6mm以下或等于6mm至75mm以下或等于75mm的冷拉铝棒	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075 - T7351. DRAW BARS 6 MM INFERIOR OR EQUAL TO A OR D INFERIOR OR EQUAL TO 75 MM. (EUROPEAN STANDARD EN 2128).)
NF L14-210-1994	航空航天系列.铝合金AL-P2024-T3511.挤压棒材和型材.a/D≤150mm,周边粗粒控制	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2024-, T3511. EXTRUDED BARS AND SECTIONS. 1,2 MM INFERIOR OR EQUAL TO A OR D INFERIOR OR EQUAL TO 150 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2633).)
NF L14-211-1994	航空航天系列.铝合金AL-P7075-T73511.挤压棒材和型材.a/D≤100mm,周边粗粒控制	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-, T73511. EXTRUDED BARS AND SECTIONS. A OR D INFERIOR OR EQUAL TO 100 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2632).)
NF L14-215-1994	航空航天系列.铝合金AL-P6061-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6061-. T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2694).)
NF L14-216-1994	航空航天系列.铝合金AL-P6081-.T6.0.3mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6081-. T6. SHEET AND STRIP. 0,3 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2695).)
NF L14-217-1994	航空航天系列.铝合金AL-P7075-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-. T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2696).)
NF L14-331-1994	航空航天系列.铝合金AL-P5086-.H111.0.3mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P5086-. H111. SHEET AND STRIP. 0,3 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2693).)
NF L14-401-1994	航空航天系列.铝合金AL-P2014A,T4或T42.薄板和带材.0.4MM≤A≤6MM	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A, T4 OR T42. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2395).)
NF L14-402-1993	航空航天系列.铝合金AL-P2014A,T4511.200mm以上或等于200mm的挤压棒材和型材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A - T4511. EXTRUDED BARS AND SECTIONS A OR D SUPERIOR OR EQUAL TO 200 MM. (EUROPEAN STANDARD EN 2100).)
NF L14-403-1994	航空航天系列.铝合金AL-P2014A,T6或T62.薄板和带材.0.4MM≤A≤6MM	(AREOSPACE SERIES. ALUMINIUM ALLOY AL-P2014A, T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2089).)
NF L14-405-1993	航空航天系列.铝合金AL-P2014A-T6511.150mm以下或等于150mm的挤压棒材和型材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A - T6511. EXTRUDED BARS AND SECTIONS A OR D INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2384).)
NF L14-422-1993	航空航天系列.铝合金AL-P2024-T3511.1.2mm以下或等于1.2mm至150mm以下或等于150mm的挤压棒材和型材	(AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2024 - T3511. EXTRUDED BARS AND SECTIONS 1,2 MM INFERIOR OR EQUAL TO A OR D INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2318).)
NF L14-701-1982	CuNi3si铜合金.航天制造用棒材	(COPPER ALLOY BARS (CUNI3SI) FOR AEROSPACE CONSTRUCTION.)
NF L14-702-1982	CuNi１４Al２铜合金.航天制造用棒材	(COPPER ALLOY BARS (CUNI14AL2) FOR AEROSPACE CONSTRUCTION.)
NF L14-703-1982	CuSn８.５P 铜合金.航天制造用棒材	(COPPER ALLOY BARS (CUSN8.5P) FOR AEROSPACE CONSTRUCTION.)
NF L14-705-1982	CuAllQNiSFe ４铜合金.航空和航空制造用棒材	(COPPER ALLOY BARS (CUAL10NI5FE4) FOR AEROSPACE CONSTRUCTION.)
NF L14-706-1982	CuALIlNi５Fe５铜合金.航天制造用棒材	(COPPER ALLOY BARS (CUAL11NI5FE5) FOR AEROSPACE CONSTRUCTION.)
NF L14-707-1982	CuZn19Al6铜合金.航天制造用棒材	(COPPER ALLOY CUZN19AL6. BARS FOR AEROSPACE USE.)
NF L14-708-1982	CuZn２３Al４铜合金.航天制造用棒材	(COPPER ALLOY BARS (CUZN23AL4) FOR AEROSPACE CONSTRUCTION.)
NF L14-709-1982	CuBe1.9 铜合金航天制造用棒材	(COPPER ALLOY BARS (CUBE1.9) FOR AEROSPACE CONSTRUCTION.)
NF L14-710-1983	CuZn３９Pb１.７铜合金.航天制造用棒材	(COPPER ALLOY BARS (CUZN39PB1.7) FOR AEROSPACE CONSTRUCTION.)
NF L14-711-1983	CuZn３６Ni２铜合金.航天制造用棒材	(COPPER ALLOY BARS (CUZN36NI2) FOR AEROSPACE CONSTRUCTION.)
NF L14-720-1983	CuBl铜合金.航天制造用板材和带材	(COPPER ALLOY SHEET AND STRIP (CU-B-1) FOR AEROSPACE CONSTRUCTION.)
NF L14-721-1983	CuBe１.９铜合金.航天制造用板材和带材	(COPPER ALLOY SHEET AND STRIP (CUBE1.9) FOR AEROSPACE CONSTRUCTION.)
NF L15-113-1972	铝合金板.整个表面的公差	(ALUMINIUM ALLOY SHEET. TOLERANCE ON TOTAL SURFACE THICKNESS.)
NF L15-115-1973	铝合金板	(ALUMINIUM ALLOY SHEET.)
NF L15-120-2002	航空航天系列.铝及铝合金板.厚度≥0.25mm和厚度≤6mm.尺寸	(Aerospace series - Sheets, in aluminium and aluminium alloys - Thickness a more than or equal to 0,25 mm and less than or equal to 6 mm - Dimensions.)
NF L15-125-2002	航空航天系列.铝合金板.厚度为6mm〈a≤160mm.尺寸	(Aerospace series - Plates in aluminium alloys - Thickness 6 mm inferior to a inferior or equal to 160 mm - Dimensions.)
NF L15-130-1966	金属或有色合金制造的半成品.钛板.尺寸和公差	(SEMI-FINISHED PRODUCTS MADE OF METAL OR NON-FERROUS ALLOYS. TITANIUM SHEET,DIMENSIONS AND TOLERANCES.)
NF L15-131-2002	航空航天系列.钛合金冷轧薄板材.厚度大于等于0.2 mm 和小于等于6 mm.尺寸	(Aerospace series - Sheets, cold rolled in titanium alloys - Thickness a more than or equal to 0,2 mm and less than or equal to 6 mm - Dimensions.)
NF L15-132-2002	航空航天系列.钛合金冷轧薄板材.厚度大于等于0.2 mm 和小于等于6 mm.尺寸	(Aerospace series - Sheets, hold rolled in titanium alloys - Thickness a more than or equal to 0,2 mm and less than or equal to 6 mm - Dimensions.)
NF L15-135-2002	航空航天系列.钛和钛合金板材.厚度大于等于6mm 和小于等于100mm.尺寸	(Aerospace series - Plates in titanium and titanium alloys - Thickness a more than or equal to 6 mm and less than or equal to 100 mm - Dimensions.)
NF L15-152-1978	铝带和铝合金带	(Strip in aluminium and aluminium alloys.)
NF L15-155-2001	航空航天系列.铝和铝合金带.厚度≤0.25mm至≤3.2mm.尺寸	(Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm inferior or equal to a inferior or equal to 3,2 mm - Dimensions.)
NF L15-312-1972	铝合金拉制圆棒材	(ROUND DRAWN BARS IN ALUMINIUM ALLOYS.)
NF L15-313-2002	航空航天系列.铝及铝合金拉制圆棒材.公差等级h11.直径4mm≤ D≤63mm.尺寸	(Aerospace series - Round bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm inferior or equal to D inferior or equal to 63 mm - Dimensions.)
NF L15-314-1972	铝合金拉制圆棒材	(EXTRUDED ROUND BARS IN ALUMINIUM ALLOYS.)
NF L15-315-2002	航空航天系列.铝及铝合金挤制圆棒材.直径10mm≤ D ≤ 220mm.尺寸	(Aerospaces series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm inferior or equal to D inferior or equal to 220 mm - Dimensions.)
NF L15-316-2002	航空航天系列.钛和钛合金圆棒.直径D≥6mm 和D≤160mm.尺寸	(Aerospace series - Round bars in titanium and titanium alloys - Diameter D more than or equal to 6 mm and less than or equal to 160 mm - Dimensions.)
NF L15-322-1972	铝合金拉制六角形棒材.尺寸和公差	(HEXAGON DRAWN BARS IN ALUMINIUM ALLOYS.)
NF L15-325-2002	航空航天系列.铝及铝合金拉制六角形棒材.公差等级h11.对边宽度 7mm≤ a ≤ 63mm.尺寸	(Aerospace series - Hexagonal bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm inferior or equal to a inferior or equal to 63 mm - Dimensions.)
NF L15-332-1972	铝合金拉制方棒材	(EXTRUDED AND DRAWN SQUARE BARS IN ALUMINIUM ALLOYS.)
NF L15-335-2002	航空航天系列.铝及铝合金拉制方形棒材.公差等级h11.直径 6mm≤ D ≤50mm.尺寸	(Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 6 mm inferior or equal to D inferior or equal to 50 mm - Dimensions.)
NF L15-340-1972	铝合金拉制扁材	(EXTRUDED FLAT BARS IN ALUMINIUM ALLOYS.)
NF L15-501-1968	铝合金拉制型材.一般公差	(GENERAL TOLERANCES ON ALUMINIUM ALLOY EXTRUDED SECTIONS.)
NF L15-512-1973	铝合金拉制等边和不等边角材	(EXTRUDED ANGLES,EQUAL AND UNEQUAL LEGS,IN ALUMINIUM ALLOYS.)
NF L15-515-2001	航空航天系列.铝合金挤压L型材.尺寸	(Aerospace series - Extruted L-section, in aluminium alloys - Dimensions.)
NF L15-520-1973	铝合金拉制圆头角材	(BEADED EXTRUSIONS IN ALUMINIUM ALLOYS.)
NF L15-525-2001	航空航天系列.铝合金串珠式挤压L型材.尺寸	(Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions.)
NF L15-530-1973	铝合金拉制Ｕ形型材	(EXTRUDED CHANNELS IN ALUMINIUM ALLOYS.)
NF L15-535-2001	航空航天系列.铝合金挤压槽型断面.尺寸	(Aerospace series - Extruded channel section in aluminium alloys - Dimensions.)
NF L15-540-1973	铝合金拉制Ｔ形型材	(EXTRUDED TEE SECTIONS IN ALUMINIUM ALLOYS.)
NF L15-545-2001	航空航天系列.铝合金挤压T型材.尺寸	(Aerospace series - Extruded T-section, in aluminium alloys - Dimensions.)
NF L15-555-2002	航空航天系列.铝合金挤制型材.一般公差	(Aerospace series - Extruted section in aluminium alloys - General tolerances.)
NF L15-560-1973	铝合金冷弯Ω形型材	(OMEGA SECTIONS IN ALUMINIUM ALLOYS.)
NF L15-570-1973	铝合金冷弯Ｚ形型材	(ZED SECTIONS IN ALUMINIUM ALLOYS.)
NF L15-611-1973	铝合金拉制圆管.通用公差	(DRAWN TUBES OF CIRCULAR SECTION IN ALUMINIUM ALLOYS. COMMON TOLERANCES.)
NF L15-612-1973	铝合金拉制圆管.精制管	(DRAWN TUBES OF CIRCULAR SECTION IN ALUMINIUM ALLOYS. PRECISION TUBES.)
NF L15-640-1973	铝合金拉制方管	(SQUARE DRAWN TUBES IN ALUMINIUM ALLOYS.)
NF L15-641-1973	铝合金拉制矩形管	(RECTANGULAR DRAWN TUBES IN ALUMINIUM ALLOYS.)
NF L15-650-1997	航天航空系列.铝及铝合金结构用圆管.直径6MM≤D≤10MM.厚度1MM≤A≤6MM.尺寸(欧洲标准EN 2257)	(Aerospace series. Circular tubes for structures in aluminium and aluminium alloys. Diameter 6 mm inferior or equal to D inferior or equal to 100 mm. Thickness 1 mm inferior or equal to a inferior or equal to 6 mm. Dimensions.)
NF L15-651-1997	航天航空系列.流体用铝及铝合金圆管.直径3.2MM≤D≤100MM.厚度0.6MM≤A≤2.5MM.尺寸(欧洲标准EN 2258)	(Aerospace series. Circular tubes for fluids in aluminium and aluminium alloys. Diameter 3,2 mm inferior or equal to D inferior or equal to 100 mm. Thickness 0,6 mm inferior or equal to a inferior or equal to 2,5 mm. Dimensions.)
NF L15-660-1978	铝合金异形扁管	(TORPEDO-SHAPED TUBES IN ALUMINIUM ALLOYS.)
NF L15-670-1978	钛和钛合金圆管	(TUBES OF CIRCULAR SECTION IN TITANIUM AND TITANIUM ALLOYS.)
NF L15-675-2002	航空航天系列.流体用钛及钛合金圆管.宽度公差.直径4mm≤ D≤ 40mm.尺寸	(Aerospace series - Circular tubes, fir fluid in titanium alloys - Wide tolerances - Diameter 4 mm inferior or equal to D inferior or equal to 40 mm - Dimensions.)
NF L15-811-2002	航空航天系列.焊接钛和钛合金用填充杆和填充焊丝.直径 D≥0.5mm 和D≤5.0mm .尺寸	(Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameters D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.)
NF L16-001-1991	航空航天系列.涂料和清漆.铝合金试样表面预加工的方法和类型	(AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN ALUMINIUM ALLOYS.)
NF L16-002-1991	航空航天系列.涂料和清漆.镁合金试样表面预加工的方法和类型	(AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN MAGNESIUM ALLOYS.)
NF L16-003-1991	航空航天系列.涂料和清漆.钛合金试样表面预加工的方法和类型	(AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN TITANIUM ALLOYS.)
NF L16-101-1997	航空和航天系列.涂料和清漆的试验方法.耐铝合金线性腐蚀的检验	(Aerospace series. Test methods for paints and varnishes. Filiform corrosion resistance test on aluminium alloys.)
NF L19-101-1-1992	航空和航天.用铝合金制的管形隔间器材.技术规范.一般要求	(AEROSPACE SERIES. HONEYCOMB MATEIRALS WITH TUBULAR CELLS IN ALUMINIUM ALLOYS. TECHNICAL SPECIFICATION. GENERAL REQUIREMENTS.)
NF L19-101-2-1992	航空和航天.用铝合金制的管形隔间器材.技术规范.六边形管形元件的特殊要求	(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS IN ALUMINIUM ALLOYS. TECHNICAL SPECIFICATION. SPECIAL REQUIREMENTS FOR HEXAGONAL TUBULAR CELLS.)
NF L21-106-1975	铆钉用铝合金、钢、耐热不锈钢合金线材.尺寸	(Wires for rivets in aluminium alloys, steel, stainless and heat resisting alloys. Dimensions.)
NF L21-107-1975	铆钉用T40非合金钛线材.尺寸	(WIRES FOR RIVETS IN T40 PURE TITANIUM. DIMENSIONS.)
NF L21-110-1975	铆钉用 T４０非合金钛线材.技术规范	(WIRES FOR RIVETS IN T40 PURE TITANIUM. TECHNICAL SPECIFICATION.)
NF L21-201-1972	铝合金铆钉.产品标准	(ALUMINIUM ALLOY RIVETS. PRODUCT STANDARD.)
NF L21-202-1976	T４０非合金钛铆钉.技术规范	(T40 PURE TITANIUM RIVETS. TECHNICAL SPECIFICATION.)
NF L21-203-1974	钢铆钉.不锈钢和耐热合金铆钉.技术规范	(STEEL RIVETS. STAINLESS AND HEAT-RESISTING ALLOY RIVETS. TECHNICAL SPECIFICATION.)
NF L21-211-1980	铝合金制半埋头铆钉(英寸)	(MUSHROOM HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).)
NF L21-212-1980	铝合金制平头铆钉(英寸)	(PAN HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).)
NF L21-213-1980	铝合金制１２０°埋头铆钉(英寸)	(120 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).)
NF L21-214-1980	铝合金制１２０°半埋头铆钉(英寸)	(RAISED 120 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).)
NF L21-216-1980	铝合金制９０°埋头铆钉(英寸)	(90 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).)
NF L21-270-1981	“SL“型带T-A6V钛合金制杆组合铆钉.技术规范	(“Sl“ type compound rivet with T-A6V titanium alloys. Technical specification.)
NF L21-271-2000	紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的凸头锁紧螺栓	(Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF L21-272-2000	紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的100°埋头锁紧螺栓	(Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF L21-273-2000	紧固件.紧公差T-A６V铝合金杆并有XC１０钢环凸头锁紧螺栓	(Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.)
NF L21-274-2000	紧固件.紧公差T-A６V钛合金杆并有XC１０钢环１００°埋头锁紧螺栓	(Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.)
NF L21-312-1994	航空系列.根据EN 2115标准中铝合金制一般头形实心铆钉	(AEROSPACES SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117. INCH BASED SERIES. (EUROPEAN STANDARD EN 2144).)
NF L21-313-1994	航空系列.根据EN 2115标准中阳极氧化处理铝合金制一般头形实心铆钉	(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED. INCH BASED SERIES. (EUROPEAN STANDARD EN 2145).)
NF L21-314-1993	航空航天系列.铆钉,固体.通用头,铝合金2017A,英寸系列(EN 2146)	(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2146).)
NF L21-316-1993	航空航天系列.铆钉,固体.通用头,铝合金5056A,英寸系列(EN 2148)	(AEROSPACES SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2148).)
NF L21-317-1996	航空系列.根据EN 2117标准中阳极氧化处理的铝合金制一般头形实心铆钉	(Aerospace series. Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series.)
NF L21-322-1993	航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金2117A,英寸系列(EN 2551)	(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES. (EUROPEAN STANDARD EN 2551).)
NF L21-323-1993	航空系列.带圆顶的,铝合金2177,阳极或铬酸盐处理的100级额定嵌入埋头孔的头,固体,铆钉	(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 2552).)
NF L21-324-1993	航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金2017A,英寸系列(EN 2553)	(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2553).)
NF L21-326-1993	航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金5056A, 英寸系列(EN 2555)	(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2555).)
NF L21-327-1993	航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金5056A, 阳极氧化处理和铬酸处理,英寸系列(EN 2556)	(AEROSPACE SEREIS. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 2556).)
NF L21-414-1996	航空系列.耐高温镍基合金钢NI-P11制镀镉带通用头的全铆钉.英制系列	(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3141).)
NF L21-415-1996	航空系列.耐高温镍基合金钢NI-P11制带通用头的全铆钉.英制系列	(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, INCH BASED SERIES. (EUROPEAN STANDARD EN 3142).)
NF L22-740-1992	航空航天系列.合金钢制带头的销钉,紧公差杆.技术规范	(Aerospace series. Pins, headed, close tolerance shank, in alloy steel. Technical specification.)
NF L23-161-1996	航空系列.阳极氧化或铬酸钝化的铝合金平垫圈	(Aerospace series. Washers, flat, in aluminium alloy, anodized or chromated.)
NF L23-164-1995	航空系列.镀镉合金钢用凹形垫片	(AEROSPACE SERIES. WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED. (EUROPEAN STANDARD EN 2648).)
NF L23-165-1996	航空系列.铝合金制阳极化或铬酸钝化的大外径平垫圈	(AEROSPACE SERIES. WASHERS, FLAT, LARGE DIAMETER, IN ALUMINIUM ALLOY, ANODIZED OR CHROMATED. (EUROPEAN STANDARD EN 2912).)
NF L24-020-1989	航空和航天.1100MPa强度级和MJ螺纹合金钢螺钉.供应品的规范	(AEROSPACE. ALLOY STEEL BOLTS WITH STRENGTH CLASSIFICATION 1100 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.)
NF L24-025-1989	航天.突出头合金钢螺钉.1250MPa强度的等级和MJ螺纹.供应品的规范	(AEROSPACE. ALLOY STEEL PROTRUDING HEAD BOLTS WITH STRENGTH CLASSIFICATION 1250 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.)
NF L24-030-1997	航空航天系列.镍基合金NI-PH2601(铬镍铁合金718)制耐热MJ螺纹螺栓.等级:1275MPA(室温)/650℃.技术规范(欧洲	(AEROSPACE SERIES. BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2583).)
NF L24-102-1997	航空和航天系列.凸台,细六角头,紧配合公差柄,短螺纹,阳极化,MOS2润滑,钛合金制螺栓.等级:1100MPA(室温下)/3	(Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.)
NF L24-104-1995	航空航天系列.镀镉合金钢的短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/235度	(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2859).)
NF L24-107-1995	航空航天系列.镀镉合金钢的短螺纹粗公差标准手柄标准六角螺栓.分类:900MPA(环境温度)/235度	(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2889).)
NF L24-108-1995	航空航天系列.镀镉合金钢的带螺纹头的标准六角螺栓.分类:900MPA(环境温度)/235度	(AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3112).)
NF L24-109-1997	航空航天系列.阳极化MOS2润滑钛合金制标准六角头、螺纹头螺丝.等级:1100MPA(室温)/315℃(欧洲标准EN 3308)	(AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).)
NF L24-118-1998	航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P100HT(INCONEL 718).分类:1275MPA(在环境温度下)/65	(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3008).)
NF L24-119-1998	航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P100HT(INCONEL 718),镀银.分类:1275MPA(在环境温度	(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED. CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3009).)
NF L24-120-1998	航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P101HT(WASPALOY).分类:1210MPA(在环境温度下)/730摄	(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3010).)
NF L24-121-1998	航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P101HT(WASPALOY)镀银.分类:1210MPA(在环境温度下)/7	(AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3011).)
NF L24-130-1997	航空航天系列.合金钢镀镉100度埋头、槽头、螺纹头螺丝.等级:900MPA(室温)/235℃(欧洲标准EN 2652)	(AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2652).)
NF L24-133-1997	航空和航天系列.100度通用沉头,偏移十字槽,紧配合普通柄,短螺纹,镀镉,合金钢制螺丝.等级:1100MPA(室温下)/2	()
NF L24-134-1997	航空和航天系列.100度减径沉头,偏移十字槽,紧配合普通柄,短螺纹,阳极化,MOS2润滑,钛合金制螺丝.等级:1100MP	()
NF L24-135-1997	航空和航天系列.100度减径沉头,偏移十字槽,紧配合普通柄,短螺纹,镀镉,合金钢制螺丝.等级:1100MPA(室温下)/2	()
NF L24-161-1997	航空和航天系列.合金钢镀镉矩形顶盖六角形承口粗公差标准柄中等长度螺纹螺丝.等级:1100MPA(室温下)/235℃(	(AEROSPACE SERIES. SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3303).)
NF L24-179-1995	航空航天系列.镀镉合金钢的带螺纹头有槽平头螺栓.分类:900MPA(环境温度)/235度	(AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2649).)
NF L24-182-1996	航空和航天.用MoS2润滑,阳极化,钛合金制,短螺纹,带翼型十字槽的平头螺钉.等级:1100MPa(室温下)/315℃	(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2884).)
NF L24-183-1996	航空和航天.镀镉,合金钢制,短螺纹,带翼型十字槽的平头螺钉.等级:900MPa(室温下)/235℃	(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2885).)
NF L24-184-1996	航空和航天系列.镀镉合金钢制短螺纹紧公差标准柄带翼型十字槽的盘形头螺丝.分类:900MPa(环境温度)/235℃(欧	(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRICUFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2886).)
NF L24-185-1996	航空和航天系列.镀镉合金钢制短螺纹紧公差标准柄带翼型十字槽的盘形头螺丝.分类:1100MPa(环境温度)/235℃(	(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2897).)
NF L24-186-1997	航空和航天系列.平头,偏移十字槽,紧配合普通柄,短螺纹,阳极化,MOS2润滑,钛合金钢制螺丝.等级:1100MPA(室温	(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3037).)
NF L24-188-1997	航空和航天系列.平头,偏移十字槽,螺纹到顶部,阳极化,MOS2润滑,钛合金钢制螺丝.等级:1100MPA(室温下)/315℃	(AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3307).)
NF L24-221-1996	航空和航天.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(室温外)/650℃	(Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.)
NF L24-222-1996	航空和航天.耐高温镍基合金NI-P100HT(因康镍 718)制镀银长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(环境温度)	(Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.)
NF L24-224-1994	航空和航天系列.耐热镍基合金NI-P101HT用螺栓,双六角头,紧公差柄,中长螺纹.分类.1210MPa(室温)/730℃	(AEROSPACE SERIES. BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (NORME EUROPEENNE EN 3063).)
NF L24-225-1996	航空航天.加高螺母用耐高温镍基合金NI-P101HT(WASPALOY)中长螺纹紧公差十二角螺丝钉.分类:1210Mpa(室温)/73	(Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), for increased height nuts. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
NF L24-228-1996	航空和航天系列.用MoS2润滑阳极化钛合金制短螺纹紧公差标准柄标准双六角头螺栓.分类:1100MPa(环境温度)/315	(AEROSPACE SERIES. BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2870).)
NF L24-229-1996	航空和航天系列.钝化耐热镍基合金制制中长螺纹紧公差标准柄大六角头螺栓.分类:1550MPa(环境温度)/315℃(欧	(AEROSPACE SERIES. BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED. CLASSIFICATION : 1550 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2874).)
NF L24-231-1996	航空和航天.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1210 Mpa(室温外)/730℃	(Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.)
NF L24-232-1996	航空和航天.耐高温镍基合金NI-P101HT(Waspaloy 一种耐高温热镍基合金)制镀银长螺纹细螺杆十二角螺丝钉.等级	(Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.)
NF L24-383-1996	航空和航天.耐高温镍基合金NI-P100HT(INCONE/718)长螺纹细螺杆T字头螺丝钉.分类:1275 Mpa(室温下)/650℃	(Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.)
NF L24-384-1996	航空和航天.耐高温镍基合金NI-P100HT(INCONE/718)镀银长螺纹细螺杆T字头螺丝钉.分类:1275 Mpa(室温下)/650	(Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.)
NF L24-385-1996	航空和航天.耐高温镍基合金NI-P101HT(WASPALOY)长螺纹细螺杆T字头螺丝钉.分类:1210 Mpa(室温下)/730℃	(Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
NF L24-386-1996	航空和航天.耐高温镍基合金NI-P101HT(WASPALOY)镀银长螺纹细螺杆T字头螺丝钉.分类:1210 Mpa(室温下)/730℃	(Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
NF L24-469-1997	航空和航天系列.合金钢镀镉MOS2润滑深锪孔双耳锁紧浮动地脚螺母.等级:900MPa/235℃(欧洲标准EN 2264)	(AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2264).)
NF L24-472-1996	航空和航天系列.带埋头孔的固定锚式单耳自锁镀镉合金钢MOS2润滑螺母.分类.1100MPa(环境温度)/235℃	(AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICAITON : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2753).)
NF L24-507-1995	航空和航天.自锁镀隔合金钢MOS*2制坡面垫平用润滑六角螺母.等级900MPa/235℃	(AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2647).)
NF L24-664-1996	航空和航天.HI-P101HT耐高热镍基合金自锁十二角螺母.等级:1210Mpa(室温下)/730℃	(AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION: 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3012).)
NF L24-665-1996	航空航天系列.镀银HI-P101HT耐高热镍基合金自锁十二角螺母.分类:1210MPA(室温下)/730℃	(AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3013).)
NF L24-666-1996	航空航天系列.镀银螺纹NI-P101HT耐高热镍基合金制自锁十二角螺母.分类:1210MPA(室温下)/730℃	(AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED THREAD. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3239).)
NF L24-960-1998	航空系列.耐热镍基合金NI-P100HT(铬镍铁合金718)自锁紧薄壁MJ螺纹插入物.技术规范	(Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Technical specification.)
NF L24-961-1998	航空系列.耐热镍基合金NI-P100HT(铬镍铁合金718)镀银内短螺纹自锁紧薄壁插入物	(Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread. Aerospace series.)
NF L24-962-1998	航空系列.耐热镍基合金NI-P100HT(铬镍铁合金718)镀银内长螺纹自锁紧薄壁插入物	(Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread. Aerospace series.)
NF L24-971-1995	航空和航天系列.镀镉合金钢用短螺纹紧公差薄六角头削角边螺栓.分类.1100MPa(室温)/235℃	(Aerospace series. Bolts, shoudered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 degrees celsius.)
NF L24-984-1998	航空系列.镶嵌式,螺纹,螺旋型线圈,自锁耐热镊合金NI-PH2801(INCONEL X 750)镀银	(Aerospace series. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated.)
NF L24-986-1998	航空系列.镶嵌式,螺纹,螺旋型线圈,自锁耐热镍基合金NI-PH2801(INCONEL X 750)	(Aerospace series. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750).)
NF L25-110-1979	铝合金合页	(ALUMINIUM ALLOY HINGES.)
NF L26-301-1995	航空航天系列.耐热镍基合金NI-P100HT(INCONEL718)用无头削角边联轴节	(Aerospace series. Pins, shoulder, headless, in heat resisting nickel base alloy ni-P100HT (inconel 718).)
NF L26-302-1995	航空航天系列.耐热镍基合金NI-P100HT(INCONEL718)用平纹定位销	(Aerospace series. Dowels, plain, in heat resisting nickel base alloy ni-P100HT (inconel 718).)
NF L31-602-1990	航空和航天系列.铝合金圆环.自润滑油封.尺寸和负载	(AEROSPACE SERIES. BUSHES,PLAIN ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2285).)
NF L31-603-1990	航空和航天系列.铝合金凸环.自润滑油封.尺寸和负载	(AEROSPACE SERIES. BUSHES,FLANGED ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2286).)
NF L31-613-1989	航空和航天系列.铝合金制套管	(AEROSPACE SERIES. COLLARS,ALUMINIUM ALLOY. (EUROPEAN STANDARD EN 2365).)
NF L35-111-1978	飞行控制和飞机结构用铝合金连杆.技术规范	(ALUMINIUM ALLOY ROD BODY FOR FLIGHT CONTROL AND AIRCRAFT STRUCTURE.TECHNICAL SPECIFICATION.)
NF L35-112-1976	飞行控制和飞机结构用铝合金连杆	(ALUMINIUM ALLOY ROD BODY FOR FLIGHT CONTROL AND AIRCRAFT STRUCTURE. DIMENSIONS.)
NF L35-120-1996	航空航天系列.飞行操纵系统用铝合金制杆体.技术规范(欧洲标准EN 2289)	(AEROSPACE SERIES. ROD BODIES IN ALUMINIUM ALLOY FOR FLIGHT CONTROLS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2289).)
NF L35-121-1998	航空航天系列.棒材,可调节末端配件用铝合金飞行控制.第1部分:尺寸和负载	(AEROSPACE SERIES. ROD BODIES, FLIGHT CONTROL IN ALUMINIUM ALLOY FOR ADJUSTABLE END FITTINGS. PART 1 : DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2290-1).)
NF L35-180-1987	航空系列.合金钢制有径向齿纹的制动器.尺寸	(Aerospace series. Washers, lock with radial serrations, in alloy steel. Dimensions.)
NF L36-212-1989	航空和航天系列.铜锌合金制拉紧螺杆套筒.尺寸和负载	(Aerospace series. Turnbarrels, control cable in copper-zinc alloys. Dimensions and loads.)
NF L43-360-2002	航空航天系列.钛合金管联接器8°30'.带螺纹的管端弯接头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded, end, threaded.)
NF L43-361-2002	航空航天系列. 8°30'钛合金管连接件.带动态梁密封端的焊接卡套	(Aerospace series - Pipe couplings 8 o30' in titanium alloy - Ferrules, welded, with dynamic beam seal end.)
NF L43-362-2002	航空航天系列. 8°30'钛合金管连接件.直接头	(Aerospace series - Pipe couplings 8 o30' in titanium alloy - Unions, straight.)
NF L43-363-2002	航空航天系列. 8°30'钛合金管连接件.直减径接头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, straight, reducer.)
NF L43-364-2002	航空航天系列.8°30'钛合金管联接件.隔壁直角管接头	(Aerospace series - Pipe couplings 8 o30' in titanium alloy - Unions, straight bulkhead.)
NF L43-365-2002	航空航天系列.8°30'钛合金管联接件.隔壁直角弯接头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, welded end.)
NF L43-366-2002	航空航天系列.钛合金管联接器8°30'.带密封环的异径管端接头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Adaptors, reduced pipe end, with lockring.)
NF L43-370-2002	航空航天系列.8°30'钛合金管联接件.90°弯头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o.)
NF L43-371-2002	航空航天系列.8°30'钛合金管联接件.带推进线螺母的90°弯头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o with thrust wire nut.)
NF L43-372-2002	航空航天系列.8°30'钛合金管联接件.90°弯头焊接端	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o welded end.)
NF L43-373-2002	航空航天系列.8°30'钛合金管联接件.带推进线螺母的90°弯头焊接端	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, welded end with thrust wire nut.)
NF L43-374-2002	航空航天系列.8°30'钛合金管联接件.隔离直通90°弯头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, bulkhead.)
NF L43-375-2002	航空航天系列.8°30'钛合金管联接件.隔离直通90°弯头焊接端	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, bulkhead, welded end.)
NF L43-376-2002	航空航天系列. 8°30'钛合金管联接件.45°弯头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o.)
NF L43-377-2002	航空航天系列. 8°30'钛合金管联接件.带推进线螺母的45°焊接端	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded end with thrust wire nut.)
NF L43-378-2002	航空航天系列. 8°30'钛合金管联接件.隔离直通45°弯头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o, bulkhead.)
NF L43-379-2002	航空航天系列.8°30'钛合金管联接件.三通管	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees.)
NF L43-380-2002	航空航天系列. 8°30'钛合金管联接件.带推进线螺母的三通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees branch with thrust wire nut.)
NF L43-381-2002	航空航天系列.8°30'钛合金管联接件.端部带推进线螺母的三通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees with thrust wire nut on run.)
NF L43-382-2002	航空航天系列.8°30'钛合金管联接件.隔直三通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees bulkhead branch.)
NF L43-383-2002	航空航天系列.8°30'钛合金管联接件.端部隔直三通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees bulkhead on run.)
NF L43-384-2002	航空航天系列.8°30'钛合金管联接件.推进线螺母	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Thrust wire nut.)
NF L43-385-2002	航空航天系列.8°30'钛合金管联接件.焊接卡套用螺母	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Nut for welded ferrule.)
NF L43-386-2002	航空航天系列.8°30'钛合金管联接件.隔壁直通螺母	(Aerospace series - Pipe coupling in titanium alloy - Bulkhead nuts.)
NF L43-387-2002	航空航天系列.8°30'钛合金管联接件.推进线	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Thrust wire.)
NF L43-388-2002	航空航天系列.8°30'钛合金管联接件.带动态粱密封端的端部焊接减径的卡套	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end.)
NF L43-389-2002	航空航天系列.8°30'钛合金管联接件.锁环配件	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Adaptors with lockring.)
NF L43-390-2002	航空航天系列.8°30'钛合金管联接件. 长型隔壁直通接头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long.)
NF L43-391-2002	航空航天系列.8°30'钛合金管联接件. 长型隔壁直通接头焊接端	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long, welded end.)
NF L43-392-2002	航空航天系列.8°30'钛合金管联接件.减径三通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced.)
NF L43-393-2002	航空航天系列.钛合金管联接器8°30'.弯管90度焊接端	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o welded ends.)
NF L43-394-2002	航空航天系列.钛合金管联接器8°30'.弯管45度焊接端	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded ends.)
NF L43-395-2002	航空航天系列.钛合金管联接器8°30'.长期使用的闷头T形管	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees bulkhead on run long.)
NF L43-396-2002	航空航天系列.钛合金管联接器8°30'.十字T形管接头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, cross.)
NF L43-397-2002	航空航天系列.钛合金管联接器8°30'.90度闷头长弯管	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o bulkhead, long.)
NF L43-398-2002	航空航天系列.8°30'钛合金管联接件.长焊接端的90°弯头隔壁直通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o bulkhead, welded end long.)
NF L43-399-2002	航空航天系列.8°30'钛合金管联接件.长分支隔壁直通三通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, bulkhead branch long.)
NF L43-400-2002	航空航天系列.8°30'钛合金管联接件.端部带推进线螺母的减径三通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced with thrust wire nut on run.)
NF L43-401-2002	航空航天系列.8°30'钛合金管联接件.Tees, reduced, bulkhead branch, long	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead branch, long.)
NF L43-402-2002	航空航天系列.8°30'钛合金管联接件.隔壁直通分支减径三通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead branch.)
NF L43-403-2002	航空航天系列.8°30'钛合金管联接件.长端头部隔壁直通分支减径三通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead on run, long.)
NF L43-404-2002	航空航天系列.8°30'钛合金管联接件.隔壁直通减径三通	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead.)
NF L43-406-2002	航空航天系列.钛合金管联接器8°30'.检修用带动态梁密封端的焊接金属包头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair.)
NF L43-407-2002	航空航天系列.钛合金管联接器8°30'.检修用焊接端部的闷头管接头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead welded end, for repair.)
NF L43-408-2002	航空航天系列.钛合金管联接器8°30'.检修用长的焊接端部的闷头管接头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead long welded end, for repair.)
NF L43-409-2002	航空航天系列.钛合金管联接器8°30'.检修用焊接端加螺纹的管接头	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded end threaded for repair.)
NF L43-613-2003	航空航天系列.耐热钢或耐热镍合金管连接件.焊接连接端.设计构型.英制	(Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series.)
NF L43-620-2003	航空航天系列.60度钛合金管接头.油口接头	(Aerospace series - Pipe couplings, 60 o, in titanium alloy - Port connection.)
NF L43-621-2003	航空航天系列.60度钛合金TI-P64001球形管接头.直通转动螺套	(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts, straight.)
NF L43-622-2003	航空航天系列.钛合金TI-P64001制球形、60度管联接器.焊接的螺纹直活管节	(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded.)
NF L43-623-2003	航空航天系列.钛合金TI-P64001制球形、60度管联接器.螺纹直活管节	(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Straight unions, threaded.)
NF L43-624-2003	航空航天系列.钛合金TI-P64001制球形、60度管联接器.焊接箍	(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Ferrules, welded.)
NF L43-625-2003	航空航天系列.钛合金TI-P64001制球形、60度管联接器.管底座	(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Caps.)
NF L43-626-2003	航空航天系列.60度钛合金TI-P64001球形管接头.拉力张线用转动螺套	(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire.)
NF L43-627-2003	航空航天系列.60度钛合金TI-P64001球形管接头.焊接的90度弯头	(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Elbows 90 o, welded.)
NF L43-628-2003	航空航天系列.60度钛合金TI-P64001球形管接头.钢FE-PA13制拉力张线	(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA13.)
NF L46-240-2002	航空航天系列.在铝合金中带橡胶垫的固定和移动式支架夹具.尺寸和重量	(Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses.)
NF L46-331-2002	航空航天系列.8°30'钛合金管接头.压合栓	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Pressure plugs.)
NF L46-332-2002	航空航天系列.钛合金 8°30'管接头.带动态梁密封端的单头卡套	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, blind, with dynamic beam seal end.)
NF L46-333-2002	航空航天系列.8°30'钛合金管连接件.带锁紧环的截止管	(Aerospace series - Pipe coupling 8 o30' in titanium alloy - Blanking plugs with lockring.)
NF L46-341-2002	航空航天系列.钛合金直通垫圈	(Aerospace series - Washers, bulkhead in titanium alloy.)
NF L46-342-2002	航空航天系列.焊接管用钛合金三通垫环	(Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure.)
NF L46-343-2002	航空航天系列.焊接管用钛合金三通垫环.28 000 kPa大气压	(Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure.)
NF L46-614-2003	航空航天系列.合金钢FE-PA3903制弹簧张力夹	(Aerospace series - Clips, spring tension, in alloy steel FE-PA3903.)
NF L52-230-2001	航空航天系列.电缆用铜或铜合金导体.产品标准	(Aerospace series - Copper or copper alloy conductors for electrical cables - Product standard.)
NF M64-100-1992	原子反应堆机械设备.设计与制造规则.原子反应堆机械设备用钴合金熔化法的表面硬化	(MECHANICAL EQUIPMENT OF NUCLEAR REACTORS : DESIGN AND CONSTRUCTION RULES. HARD FACING BY COBALT ALLOYS MELTING FOR MECHANICAL EQUIPMENT OF NUCLEAR REACTORS.)
NF M87-228-2003	石油和天然气工业.铝合金钻杆	(Petroleum and natural gas industries - Aluminium alloy drill pipes.)
NF M87-240-2002	石油和天然气工业.作外壳、管道和连接材料用的耐腐蚀合金无缝管.交货技术条件	(Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions.)
NF P22-202-1-1993	DTU 32-2.建筑工程.金属结构件.铝合金框架.第1部分:技术规范	(DTU 32-2 - Building works - Metal construction - Aluminium alloys framework - Part 1 : technical specifications.)
NF P22-202-1/A1-2000	DTU 32.2 建筑工程.金属构架.铝合金框架.第1部分:技术规范	(DTU 32.2 - Building works - Metal construction - Aluminium alloys framework - Part 1 : technical specifications.)
NF P22-202-2-1993	DTU 32-2. 建筑工程.私人合同.金属结构.铝合金制门窗框.第2部分:特殊条款	(DTU 32-2. BUILDING WORKS. PRIVATE CONTRACTS. METAL CONSTRUCTION. ALUMINIUM ALLOYS FRAMEWORK. PART 2 : SPECIAL CLAUSES.)
NF P26-309-1958	五金.称作第一熔化的铝合金重力模制五金用品	(HARDWARE. GRAVITY CAST ALUMINIUM ALLOY HARDWARE.)
NF P34-411-1983	屋顶.加筋或不加筋铝合金波形板	(Roofing materials. Corrugated or ribbed aluminium alloy plates.)
NF P34-504-1983	屋顶.铝合金加筋板.静力和动力试验	(ROOF COVERING. ALUMINIUM ALLOY RIBBED SHEETS. STATIC AND DYNAMIC BEND TESTS.)
NF P34-631-1983	屋顶.铝或铝合金制线状型材	(ROOF COVERING. ALUMINIUM OR ALUMINIUM-ALLOY SHAPED LINEAR ELEMENTS.)
NF P43-000-2003	建筑物阀门.建筑物中饮用水供应用铜合金节流阀.试验要求.国家标准补充	(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements - National complement.)
NF P43-001-2000	建筑物用阀门.建筑物中供应引用水用铜合金截止阀.试验和要求	(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.)
NF R93-903-1978	轻合金用六角空心螺纹塞	(HEXAGONAL HOLLOW SCREW-PLUGS FOR USE ON LIGHT ALLOYS.)
NF S80-771-1973	钟表业.手表壳和钟表零件合金镀层的一般特性	(Horology. General requirements for gold alloy coverings on watch cases and horological components.)
NF S86-610-1996	钟表业.非铁合金镀铬表鉴定	(Horology. Verification of chromium plated watch cases made in non ferrous alloys.)
NF S90-427-1990	外科医疗器械.脊椎用接骨器材.不锈钢制或钴基合金制脊椎板.A系统.尺寸与几何形状	(MEDICO-SURGICAL EQUIPMENT. OSTEOSYNTHESIS EQUIPMENT FOR THE RACHIS. FORGED STAINLESS STELL OR COBALT ALLOY RACHIS PLATES. SYSTEM A. DIMENSIONS AND GEOMETRY.)
NF S91-109-1999	牙科用旋转器械.牙钻.第1部分:钢制牙钻和硬质合金牙钻	(Dental rotary instruments. Burs. Part 1 : steel and carbide burs.)
NF S91-116-4-2003	牙科用旋转器械.切割刀具.第4部分:实验室用小型硬质合金刀具	(Dental rotary instruments - Cutters - Part 4 : miniature carbide laboratory cutters.)
NF S91-117-2001	牙科旋转器械.切割器.第2部分:实验室用硬质合金切割器	(Dental rotary instruments - Cutters - Part 2 : carbide laboratory cutters.)
NF S91-130-1994	牙科用旋转器械.切割工具.第3部分:铣床用硬质合金实验室刀具	(Dental rotary instruments. Cutters. Part 3 : carbide laboratory cutters for milling machines.)
NF S91-141-1997	牙齿植入物.牙科用合金的生物相容性.电化学试验的标准化	(biodegradability of dental metal alloys. Standardization of electrochemical tests.)
NF S91-201-2002	牙科材料.牙用汞齐合金	(Dental materials - Alloys for dental amalgam.)
NF S91-204-1995	牙科金合金铸件	(Dental casting gold alloys.)
NF S91-218-2000	铸牙用贵金属含量介于25%-75%之间的合金	(Dental casting alloys with noble metal content of at least 25 % but less than 75 %.)
NF S91-222-1-1997	牙科基本金属铸造合金.第1部分:钴基合金(欧洲标准EN ISO 6871-1)	(Dental base metal casting alloys. Part 1 : cobalt-based alloys.)
NF S91-222-2-1997	牙科基本金属铸造合金.第2部分:镍基合金(欧洲标准EN ISO 6871-2)	(Dental base metal casting alloys. Part 2 : nickel-based alloys.)
NF S91-249-1997	牙科陶瓷熔凝的金属修复合金	(DENTAL CERAMIC FUSED TO METAL RESTORATIVE ALLOYS.)
NF S91-310-1997	牙科设备.汞、合金混合器和分配器(欧洲标准EN ISO 8282)	(DENTAL EQUIPMENT. MERCURY AND ALLOY MIXERS AND DISPENSERS. (EUROPEAN STANDARD EN ISO 8282).)
NF S91-312-2003	牙科学.汞齐合金胶囊	(Dentistry - Dental amalgam capsules.)
NF S94-053-1997	外科植入物.金属材料.第12部分:锻造钴/铬/钼合金	(Implants for surgery. Metallic materials. Part 12 : wrought cobalt-chromium-molybdenum alloy.)
NF S94-054-1997	外科植入物.金属材料.第4部分:钴铬钼铸造合金	(Implants for surgery. Metallic materials. Part 4 : cobalt-chromium-molybdenum casting alloy.)
NF S94-055-1997	外科用植入物.金属材料.第5部分:锻制钴-铬-钨-镍合金	(Implants for surgery. Metallic materials. Part 5 : wrought cobalt-chromium-tungsten-nickel alloy.)
NF S94-056-1998	外科植入物.金属材料.第6部分:锻压的钴镍铬钼合金	(Implants for surgery. Metallic materials. Part 6 : wrought cobalt-nickel-chromium-molybdenum alloy.)
NF S94-057-1997	外科植入物.金属材料.可锻和冷成型钴铬镍钼铁合金	(Implants for surgery. Metallic materials. Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy.)
NF S94-058-1998	外科植入物.金属材料.第8部分:锻压的钴镍铬钼钨铁合金	(Implants for surgery. Metallic materials. Part 8 : wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy.)
NF S94-080-1-1997	外科植入物.钛合金TI 6 AI 4V.第1部分:棒材和杆材	(Surgical implants. Titanium alloy Ti 6 AI 4V. Part 1 : bars and rods.)
NF S94-080-2-1997	外科植入物.钛合金TI 6 AI 4V.第2部分:薄板、带材和板材	(Surgical implants. Titanium alloy Ti 6 AI 4V. Part 2 : sheets, strips and plates.)
NF S94-080-3-1997	外科植入物.钛合金TI 6 AI 4V.第3部分:类似铸造半成品	(Surgical implants. Titanium alloy Ti 6 AI 4V. Part 3 : semi-finished products obtained by casting.)
NF S94-080-4-1997	外科植入物.钛合金TI 6 AI 4V.第4部分:由锻造或切削加工而得的半成品	(Surgical implants. Titanium alloy Ti 6 AI 4V. Part 4 : semi-finished products obtained by forging or by machining.)
NF S99-515-2001	医疗器械的生物评定.第15部分:对从金属和合金中降解的产品的识别和合格检验	(Biological evaluation of medical devices - Part 15 : identification and quantification of degradation products from metals and alloys.)
NF T34-750-1-2003	涂料和清漆.建筑用铝及铝合金涂层.第1部分:粉末涂覆材料制涂层	(Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : coatings prepared from powder coating materials.)
NF T60-186-1993	水合金属工作流体.与黑色金属接触时防绣特性的测定	(AQUEOUS METAL WORKING FLUIDS. EVALUATION OF RUST PREVENTION PROPERTIES ON CONTACT WITH FERROUS METALS.)
NF T60-197-1993	水合及非水合金属工作流体.长期及短期耐储存性	(AQUEOUS AND NON AQUEOUS METAL WORKING FLUIDS. SHORT AND LONG TERM STORAGE STABILITY.)
P22-202-1993	DTU 31-2.建筑工程.金属建筑.铝合金框架.第1部分:技术规范.第2部分:特别条款	(DTU 32-2. Building works. Metal construction. Aluminium alloys framework. Part 1 : technical specifications - Part 2 : special clauses.)
编号	中文名称	英文名称