| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 21521-1-1990 | 采矿和坑道掘进工程用锚杆.术语 | Rock bolts for mining and tunnelling; terms |
| DIN 21521-2-1993 | 矿井和隧道支护用锚杆.钢制锚杆的通用规范.试验、检验方法 | Rock bolts for mining and tunnel support; general specifications for steel-bolts; tests, testing methods |
| DIN 21522-1972 | 矿井和遂道支撑用防护锚栓板 | Roof bolt plates for mining and tunnel support |
| DIN 24536-1985 | 炼钢厂和轧钢机用设备.在技术图纸上带锚盒的地脚螺栓和T 型头螺栓的图形符号 | Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings |
| DIN 24539-1-1985 | 冶金和轧钢设备.按DIN261的T型头螺栓用锚板.单块锚板.尺寸、名称、安装深度 | Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; single anchor plates; dimensions, designations, mounting depth |
| DIN 24539-2-1985 | 冶金和轧钢设备.按DIN261的T 型头螺栓用锚板.双锚板.尺寸、名称、安装深度 | Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth |
| DIN 24541-1985 | 炼钢厂和轧钢机用设备.按DIN24539的锚盒的模板吊杆.尺寸、标记 | Equipment for steelworks and rolling mills; shuttering steeves for anchor boxes according to DIN 24539; dimensions, designation |
| DIN 28158-1984 | 整体搪瓷锚式搅拌器.尺寸 | One piece glass lined anchor agitator; dimensions |
| DIN 48328-1943 | 1KV以下通信和电力架空线.锚杆 | Telecommunication and power current overhead lines below 1 kV; anchor logs |
| DIN 5683-2-1966 | 浮标锚链卸扣、锚转环和转钩 | Buoy chains shackles, swivels, swivel hooks |
| DIN 65238-2002 | 航空航天.自锁非浮动钢制角缘带MJ螺纹深埋头锚定螺母.分类:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 °C |
| DIN 65240-2002 | 航空航天.自锁浮动钢制双耳带MJ螺纹深埋头锚定螺母.分类:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65243-2002 | 航空航天.单耳浮动自锁深埋头带MJ螺纹的钢制锚定螺母.分类:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65343-2002 | 航空航天.双耳减缩自锁深埋头带MJ螺纹的钢制锚定螺母.分类:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; Classification: 1100 MPa/235 °C |
| DIN 65347-2002 | 航空航天.单耳自锁深埋头带MJ螺纹的钢制锚定螺母.分类:1100MPa/235℃ | Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 °C |
| DIN 7952-1-1986 | 螺纹式金属板锚具.第1部分:尺寸 | Sheet metal anchorage with threads; dimensions |
| DIN 81834-2000 | 锚定设备元部件.术语和定义 | Components for anchoring equipment - Terms and definitions |
| DIN 81835-2001 | 锚链锁.计算单位的基础 | Anchor chain cables - Basis for calculation units |
| DIN 81846-2-2007 | K4级螺柱连接的锚链缆索.装配作用力和破坏力.第2部分:B型无链条外侧连接节.德文和英文版 | Stud link anchor chain cables, Grade K4 - Assembly, applied forces and breaking forces - Part 2: Type B without chain outboard shots; Text in German and English |
| DIN 81850-2007 | K4级螺柱连接的锚链缆索.端部链节.德文和英文版 | Stud link anchor chain cables, Grade K4 - End links; Text in German and English |
| DIN 81860-1-1999 | 船舶上锚链索的端部紧固.第1部分:组装 | End fastenings for anchor chain cables on board ships - Part 1: Assembly |
| DIN 81860-2-1999 | 舰船上的锚链钢缆端部紧固装置.第2部分:部件 | End fastenings for anchor chain cables on board ships - Part 2: Components |
| DIN 81902-1998 | 滚柱导缆器 | Roller fairleads |
| DIN 84525-1999 | 起锚机和铰盘.锚链用钢索提升器.设计尺寸 | Windlasses and anchor capstans - Cable lifters for anchor chains - Design dimensions |
| DIN EN 13573-2001 | 内河运输船只.抛锚、连接、拖曳、牵引和停泊系统 | Inland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems; German version EN 13573:2001 |
| DIN EN 14330-2004 | 内河航行船舶.无嵌钉的锚链.圆钢环节链 | Inland navigation vessels - Studless anchor chain - Round steel link chain; German version EN 14330:2003 |
| DIN EN 14606-2004 | 内河船舶.无栓锚链.附件 | Inland navigation vessels - Studless anchor chain - Accessories; German version EN 14606:2004 |
| DIN EN 14874-2006 | 内河航行船只.无档锚链.锚链轮.德文版本 EN 14874-2005 | Inland navigation vessels - Studless anchor chain - Cable lifter; German version EN 14874:2005 |
| DIN EN 1504-6-2006 | 混凝土结构保护和维修用产品和系统.定义、要求、质量控制和合格评定.第6部分:修补钢棒的锚定 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar; English version of DIN EN 1504-6:2006-11 |
| DIN EN 15271-2007 | 内河航行船舶.无档锚链.锚设备 | Inland navigation vessels - Studless anchor chain - Anchor equipment; German version EN 15271:2007 |
| DIN EN 15272-2-2007 | 内河航行船舶.绳索导向设备.第2部分:导缆器 | Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead; German version EN 15272-2:2007 |
| DIN EN 15361-2007 | 蒸压加气混凝土预制加筋构件中腐蚀防护覆层对横向锚杆的锚固能力影响的测定 | Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete; German version EN 15361:2007 |
| DIN EN 1537-2001 | 特殊土工作业.地锚 | Execution of special geotechnical works - Ground anchors; German version EN 1537:1999 + AC:2000 |
| DIN EN 1881-2007 | 保护和修复混凝土结构的产品和系统.试验方法.用拔拉法测试锚定产品 | Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method; English version of DIN EN 1881:2007-01 |
| DIN EN 959-2007 | 登山运动器材.岩石锚定.安全要求和试验方法 | Mountaineering equipment - Rock anchors - Safety requirements and test methods; German version EN 959:2007 |
| DIN EN ISO 15084-2003 | 小艇.投锚、停泊和牵引.坚固支撑点 | Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003); German version EN ISO 15084:2003 |
| DIN ISO 3730-1990 | 造船.锚泊绞盘 | Shipbuilding; mooring winches; identical with ISO 3730:1988 |
| DIN ISO 4568-1995 | 造船.远洋海轮.卷扬机和起锚机 (ISO 4568:1986) | Shipbuilding - Sea-going vessels - Windlasses and anchor capstans (ISO 4568:1986) |
| DIN V 81833-1999 | 锚链设备的元件.概览 | Components for anchoring equipment - Survey |
| DIN V 81841-1999 | K4 级锚链钢缆.要求和试验 | Anchor chain cables grade K4 - Requirements and test |
| DIN V 81851-1999 | K4 级锚链钢缆.斜连接钩环 | Anchor chain cables grade K4 - Kenter type joining shackles |
| DIN V 81855-1999 | K4 级锚链钢缆.链条外侧连接节 | Anchor chain cables grade K4 - Chain outboard shots |
| 编号 | 中文名称 | 英文名称 |