法国锚标准(NF anchor standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
EN 13573-2001 内河航运船舶 抛锚、联结、牵引、拖拉和停泊系统 Inland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems
EN 24565-1989 小艇 锚链 Small craft - Anchor chains (ISO 4565:1986)
EN 353-2-2002 预防高空坠落的人身保护设备 第2部分:包括挠性锚固线的指导型防坠落装置 Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line
EN 568-1997 登山设备 冰锚 安全要求和试验方法 Mountaineering equipment - Ice anchors - Safety requirements and test methods
EN 959-1996 登山设备 岩石锚栓 安全要求和试验方法 Mountaineering equipment - Rock anchors - Safety requirements and test methods
NF E27-816-1998 锚栓.试验用 (Anchor bolts. Fitness for use tests.)
NF F56-001-1985 铁路固定设备.F 56通讯和信号装置架空线路用器材铁路固定设备.通信和信号装置架空线路用器材.定位牌和锚 (FIXED RAILWAY EQUIPMENT. MATERIAL FOR TELECOMMUNICATION AND SIGNALLING OVERHEAD LINES. KEYING-PLATE AND ANCHOR-PLATE.)
NF F56-159-1978 铁路固定设备.通讯和信号装置架空线路用器材.锚定杆用板 (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. PLATES FOR ANCHORING BARS.)
NF J37-230-1956 造船工业.导缆钳和导缆器.一般规范 (SHIPBUILDING. FAIRLEADS AND GUIDES FOR HAWSERS. GENERAL REQUIREMENTS.)
NF J37-260-1956 造船工业.导缆器.组装 (SHIPBUILDING. HAWSER GUIDES. ASSEMBLY.)
NF J37-262-1956 造船工业.导缆器.滚轮和导缆器.安装 (SHIPBUILDING. HAWSER GUIDES. ROLLER AND CLEAT. ASSEMBLY.)
NF J37-263-1956 造船工业.导缆器.水平滚轮用导缆器 (SHIPBUILDING. HAWSER GUIDES. CLEAT FOR HORIZONTAL ROLLERS.)
NF J37-264-1956 造船工业.导缆器.滚轮支架 (SHIPBUILDING. HAWSER GUIDES. ROLLER BRACKET.)
NF J37-272-1953 造船工业.椭圆形舷墙导缆孔 (SHIPBUILDING. HAWSE-HOLES. ELLIPTICAL TYPE.)
NF J37-274-1953 造船工业.圆形舷墙导缆孔 (SHIPBUILDING. HAWSE-HOLES. CIRCULAR TYPE.)
NF J37-280-1953 造船工业.“巴拿马“导缆孔 (SHIPBUILDING. HAWSE-HOLES. “PANAMA“ TYPE.)
NF J37-292-1983 游艇.导缆钳.互换尺寸 (Yachting. Fairleads for rigging. Interchangeability dimensions.)
NF J37-300-1946 造船工业.锚链.一般规范 (SHIPBUILDING. ANCHOR CABLES. GENERAL REQUIREMENTS.)
NF J37-310-1946 造船工业.锚链.普通锚链环圆钢口径 (SHIPBUILDING. ANCHOR CABLES. ROUND BARS FOR COMMON LINKS.)
NF J37-311-1946 造船工业.锚链.大链环和末端环圆钢口径 (SHIPBUILDING. ANCHOR CABLES. ROUND BARS FOR ENLARGED AND END LINKS.)
NF J37-320-1946 造船工业.锚链.链环 (SHIPBUILDING. ANCHOR CABLES. LINKS.)
NF J37-330-1946 造船工业.锚链.连接链环 (SHIPBUILDING. ANCHOR CABLES. JOINING SHACKLES.)
NF J37-340-1946 造船工业.锚链.“康特系统“连接卸口链环 (SHIPBUILDING. ANCHOR CABLES. KENTER SYSTEM JOINING SHACKLES.)
NF J37-360-1946 造船工业.锚链.带转环或不带转环的链端 (SHIPBUILDING. ANCHOR CABLES. CABLE ENDS WITH OR WITHOUT SWIVEL LINK.)
NF J37-370-1946 造船工业.锚链.普通锚链和带环锚链 (SHIPBUILDING. ANCHOR CABLES. COMMON LINK AND STAPLE LINK.)
NF J37-380-1946 造船工业.锚链.锚链卸扣 (SHIPBUILDING. ANCHOR CABLES. CLINCHER LINK.)
NF J37-405-1990 游艇.锚链(EN 24565) (Small craft. Anchor chains.)
NF J84-416-2002 内河航运船舶.抛锚,耦合,拖曳,牵引和停泊系统 (Inland navigation vessels - Anchoring, coupling, towing, hauling and mooring systems.)
NF J95-064-2003 小艇.投锚、停泊和牵引.靠船墩 (Small craft - Anchoring, mooring and towing - Strong points.)
NF L24-472-1996 航空和航天系列.带埋头孔的固定锚式单耳自锁镀镉合金钢MOS2润滑螺母.分类.1100MPa(环境温度)/235℃ (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICAITON : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2753).)
NF P94-321-2000 特殊土工技术工程的实施.地锚 (Execution of special geotechnical work - Ground anchors.)
NF P95-301-1994 雪崩防护系统.软地无源集中的锚地.固着力实验方法 (AVALANCHE PROTECTION SYSTEMS. PASSIVE CONCENTRATED ANCHORAGES FOR SOFT GROUND. PULL OUT TESTS METHOD.)
NF R10-114-1-2000 道路车辆.车辆中的锚固装置和儿童约束系统用锚固装置的附件.第1部分:座椅弯曲处的锚固装置和附件 (Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1 : seat bight anchorages and attachments.)
NF S52-342-1998 登山设备.导缆索.安全要求和试验方法 (MOUNTAINEERING EQUIPMENT. CHOCKS. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 12270).)
NF S52-346-1996 登山设备.岩石锚.安全要求和试验方法 (MOUNTAINEERING EQUIPMENT. ROCK ANCHORS. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 959).)
NF S52-347-1997 登山设备.冰锚.安全要求和试验方法(欧洲标准EN 568) (MOUNTAINEERING EQUIPMENT. ICE ANCHORS. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 568).)
NF S52-361-1998 登山设备.摩擦锚链.安全要求和测试方法 (MOUNTAINEERING EQUIPMENT. FRICTIONAL ANCHORS. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 12276).)
NF S71-502-1-2002 防止从高处跌落的个人防护设备.第1部分:包括刚性锚线的制导型防跌落装置 (Personal protective equipment against falls from a height - Part 1 : guided type fall arresters including a rigid anchor line.)
NF S71-502-2-2002 防止从高处跌落的个人防护设备.第2部分:包括柔性锚线的制导型防跌落装置 (Personal protective equipment against falls from a height - Part 2 : guided type fall arresters including a flexible anchor line.)
NF S71-513-1996 防止从高处跌落的个人防护设备.锚具装置.要求和试验 (PROTECTION AGAINST FALLS FROM A HEIGHT. ANCHOR DEVICES. REQUIREMENTS AND TESTING. (EUROPEAN STANDARD EN 795).)
NF S71-513/A1-2000 防止从高处跌落的防护设备.锚固装置.要求和试验 (Protection against falls from a height - Anchor devices - Requirements and testing.)
NF S83-201-1995 钟表业.锚式擒纵轮.轮、叉、双圆盘 (Horology. Pallet escapements. Wheels, pallets, trays.)
NF S83-202-1995 钟表业.锚式擒纵轮.机心平面 (Horology. Pallet escapements. Ebauche uprighting.)
NF S83-203-1995 钟表业.锚式擒纵轮.机件相对高度 (Horology. Pallet escapements. Relative height of components.)
编号 中文名称 英文名称

返回