| 编号 | 中文名称 | 英文名称 |
|---|
| EN 10257-1-1998
| 动力电缆或通信电缆铠甲用镀锌或锌合金的非合金钢电线 第1部分：地面电缆
| Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables
|
| EN 10257-2-1998
| 动力电缆或通信电缆铠甲用镀锌或锌合金的非合金钢电线 第2部分：海底电缆
| Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables
|
| EN 12548-1999
| 铅和铅合金 电缆铍和护套用铅合金铸锭
| Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves
|
| EN 12613-2001
| 具有可视特性的地下电缆和管线用塑料报警装置
| Plastics warning devices for underground cables and pipelines with visual characteristics
|
| EN 175500-1997
| 分规范：包括批准和能力批准的连接器用电缆引出端附件
| Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval
|
| EN 187105-2002
| 单模光纤电缆(管道/直埋安装)
| Single mode optical cable (duct/direct buried installation)
|
| EN 2083-2001
| 航空航天系列 电缆用铜和铜合金导体 产品标准
| Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard
|
| EN 2355-1988
| 航空航天系统 控制电缆用耐腐蚀钢的螺纹叉形端 尺寸和负载
| Aerospace series - Fork-ends, threaded, control cable in corrosion resisting steel; Dimensions and loads
|
| EN 2591-610-2001
| 航空航天系列 光电连接元件 试验方法 第610部分：光学元件 电缆附件的效能 电缆拉力
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 610: Optical elements; Effectiveness of cable attachment; Cable pulling
|
| EN 2591-611-2001
| 航空航天系列 光电连接元件 试验方法 第611部分：光学元件 电缆附件的效能 电缆扭力
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 611: Optical elements; Effectiveness of cable attachment; Cable torsion
|
| EN 2591-612-2001
| 航空航天系列 光电连接元件 试验方法 第612部分：光学元件 电缆附件的效能 电缆轴向压力
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression
|
| EN 300429 V 1.2.1-1998
| 数字视频广播（DVB） 电缆系统用构架结构、频道编码和调制
| Digital Video Broadcasting (DVB) - Framing structure, channel coding and modulation for cable systems
|
| EN 3475-100-2002
| 航空航天系列 飞行器用的电缆 试验方法 第100部分：总则
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General
|
| EN 3475-201-2002
| 航空航天系列 飞行器用的电缆 试验方法 第201部分：可视检查／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-202-2002
| 航空航天系列 飞行器用的电缆 试验方法 第202部分：质量／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-301-2002
| 航空航天系列 飞行器用的电缆 试验方法 第301部分：每单位长度的欧母电阻／注：适合与EN 3475-100结合使
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Ohmic resistance per unit length / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-302-2002
| 航空航天系列 飞行器用的电缆 试验方法 第302部分：电压校检试验／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 302: Voltage proof test / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-303-2002
| 航空航天系列 飞行器用的电缆 试验方法 第303部分：绝缘电阻／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-304-2002
| 航空航天系列 飞行器用的电缆 试验方法 第304部分：表面电阻／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-305-2002
| 航空航天系列 飞行器用的电缆 试验方法 第305部分：过载电阻／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-401-2002
| 航空航天系列 飞行器用的电缆 试验方法 第401部分：加速老化／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-402-2002
| 航空航天系列 飞行器用的电缆 试验方法 第402部分：收缩和脱层／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-403-2002
| 航空航天系列 飞行器用的电缆 试验方法 第403部分：脱层和阻塞／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-404-2002
| 航空航天系列 飞行器用的电缆 试验方法 第404部分：热冲击／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-405-2002
| 航空航天系列 飞行器用的电缆 试验方法 第405部分：环境温度下的弯曲／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-406-2002
| 航空航天系列 飞行器用的电缆 试验方法 第406部分：冷弯试验／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-407-2002
| 航空航天系列 飞行器用的电缆 试验方法 第407部分：可燃性／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 407: Flammability / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-409-2002
| 航空航天系列 飞行器用的电缆 试验方法 第409部分：真空老化／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-410-2002
| 航空航天系列 飞行器用的电缆 试验方法 第410部分：耐热性／注：适合与EN 3475-100和 ASTM D 3032 (1986
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 14
|
| EN 3475-412-2002
| 航空航天系列 飞行器用的电缆 试验方法 第412部分：防潮性能
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance
|
| EN 3475-413-2002
| 航空航天系列 飞行器用的电缆 试验方法 第414部分：缠绕反向测试
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test
|
| EN 3475-501-2002
| 航空航天系列 飞行器用的电缆 试验方法 第501部分：动态切口／注：适合与EN 3475-100和 ASTM D 3032 (19
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 501: Dynamic out-through / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 22
|
| EN 3475-502-2002
| 航空航天系列 飞行器用的电缆 测试方法 第502部分：切口扩散／注：适合与EN 3475-100 结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-503-2002
| 航空航天系列 飞行器用的电缆 测试方法 第503部分：擦伤磨损／注：适合与EN 3475-100 结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-504-2002
| 航空航天系列 飞行器用的电缆 测试方法 第504部分：扭转／注：适合与EN 3475-100 结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-505-2002
| 航空航天系列 飞行器用的电缆 测试方法 第505部分：导线和绞线的拉伸试验／注：适合与EN 3475-100结合使
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 505: Tensile test on conductors and strands / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-506-2002
| 航空航天系列 飞行器用的电缆 测试方法 第506部分：电镀连续性／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 506: Plating continuity / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-507-2002
| 航空航天系列 飞行器用的电缆 测试方法 第507部分：绝缘层与导体间的剥离性及粘附力／注：适合与EN 3475
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 507: Strippability and adherence of insulation to the conductor / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-508-2002
| 航空航天系列 飞行器用的电缆 测试方法 第508部分：电镀厚度
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness
|
| EN 3475-509-2002
| 航空航天系列 飞行器用的电缆 测试方法 第509部分：软焊性
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability
|
| EN 3475-510-2002
| 航空航天系列 飞行器用的电缆 测试方法 第510部分：铠装和包皮材料、抗张强度和挤压绝缘层的伸张度
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material
|
| EN 3475-511-2002
| 航空航天系列 飞行器用的电缆 试验方法 第511部分：电缆与电缆磨损
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion
|
| EN 3475-512-2002
| 航空航天系列 飞行器用的电缆 试验方法 第512部分：耐弯曲性
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance
|
| EN 3475-603-2002
| 航空航天系列 飞行器用的电缆 试验方法 第603部分：抗湿弧轨迹性
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 603: Resistance to wet arc tracking
|
| EN 3475-604-2002
| 航空航天系列 飞行器用的电缆 试验方法 第604部分：抗干弧扩展性
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation
|
| EN 3475-605-2002
| 航空航天系列 飞行器用的电缆 试验方法 第605部分：湿短路试验
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test
|
| EN 3475-701-2002
| 航空航天系列 飞行器用的电缆 试验方法 第701部分：绝缘层与导体间的剥离性和粘附力／注：适合与EN 3475
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippability / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-702-2002
| 航空航天系列 飞行器用的电缆 试验方法 第702部分：屏蔽抗冲击能力／注：适合与EN 3475-100结合使用
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-703-2002
| 航空航天系列 飞行器用的电缆 试验方法 第703部分：制造商标记的持久性／注：适合与EN 3475-100结合使
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturers marking / Note: Applies only in conjunction with EN 3475-100
|
| EN 3475-704-2002
| 航空航天系列 飞行器用的电缆 试验方法 第704部分：柔性
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 704: Flexibility
|
| EN 3475-705-2002
| 航空航天系列 飞行器用的电缆 试验方法 第705部分：对比测量
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 705: Contrast measurement
|
| EN 3475-801-2002
| 航空航天系列 飞行器用的电缆 试验方法 第801部分：每单位长度电容
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length
|
| EN 3475-802-2002
| 航空航天系列 飞行器用的电缆 试验方法 第802部分：非平衡电容
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance
|
| EN 3475-803-2002
| 航空航天系列 飞行器用的电缆 试验方法 第803部分：可变电容
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation
|
| EN 3475-804-2002
| 航空航天系列 飞行器用的电缆 试验方法 第804部分：传播速度
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of progagation
|
| EN 3475-805-2002
| 航空航天系列 飞行器用的电缆 试验方法 第805部分：阻抗特征
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance
|
| EN 3475-806-2002
| 航空航天系列 飞行器用的电缆 试验方法 第806部分：衰减
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation
|
| EN 3475-807-2002
| 航空航天系列 飞行器用的电缆 试验方法 第807部分：传输阻抗
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance / Note: Applies in conjunction with EN 3475-100 (2002-02)
|
| EN 3475-808-2002
| 航空航天系列 飞行器用的电缆 试验方法 第808部分：串音
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk / Note: Applies in conjunction with EN 3475-100 (2002-02)
|
| EN 3745-205-2002
| 航空航天系列 航空用光缆和光纤 试验方法 第205部分：电缆纵向尺寸的稳定性
| Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability
|
| EN 3745-511-2002
| 航空航天系列 航空用光缆和光纤 试验方法 第511部分：电缆间磨损
| Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion
|
| EN 50083-1-1993+A1 -1997+A2-1997
| 电视和声音信号及交互式服务用电缆网络 第1部分：安全要求
| Cable networks for television signals, sound signals and interactive services - Part 1: Safety requirements
|
| EN 50083-10-2002
| 电视和声音信号及交互式服务用电缆分配系统 第10部分：回程线路系统性能
| Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths
|
| EN 50083-2-2001
| 电视和声音信号及交互式服务用电缆网络 第2部分：设备的电磁兼容性
| Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
|
| EN 50083-3-2002
| 电视和声音信号及交互式服务用电缆网络 第3部分：共轴电缆网络的活力宽谱带设备
| Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks
|
| EN 50083-4-1998
| 电视和声音信号及交互式服务用电缆网络 第4部分：共轴电缆网络的无源宽谱带设备
| Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks
|
| EN 50083-5-2001
| 电视和声音信号及交互式服务用电缆网络 第5部分：起点设备
| Cabled networks for television signals, sound signals and interactive services - Part 5: Headend equipment
|
| EN 50083-6-1997
| 电视和声音信号及交互式服务用电缆网络 第6部分：光学设备
| Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
|
| EN 50083-7-1996+A1-2000
| 电视和声音信号及交互式服务用电缆网络 第7部分：系统性能
| Cable networks for television signals, sound signals and interactive services - Part 7: System performance
|
| EN 50083-8-2002
| 电视和声音信号及交互式服务用电缆网络 第8部分：网络的电磁兼容性
| Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks
|
| EN 50083-9-2002
| 电视和声音信号及交互式服务用电缆网络 第9部分：DVB/MPEG-2-传输电流用 CATV-/SMATV端点和类似专业设备
| Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
|
| EN 50085-1-1997+A1-1998
| 电气装置用电缆槽和电缆管道系统 第1部分：一般要求
| Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
|
| EN 50085-1/prA2-2002
| 电气装置用电缆槽和电缆管道系统 第1部分：一般要求 修改PrA2
| Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; Amendment A2
|
| EN 50085-2-3-1999
| 电气装置用电缆槽和电缆管道系统 第2-3部分：箱式设备用有槽电缆槽系统的特殊要求
| Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets
|
| EN 50086-1-1993
| 电缆装置用导管系统 第1部分：一般要求
| Conduit systems for cable management - Part 1: General requirements
|
| EN 50086-2-1-1995 +A11-1998
| 电缆装置用导管系统 第2-1部分：刚性导管系统的特殊要求
| Conduit systems for cable management - Part 2-1: Particular requirements for rigid conduit systems
|
| EN 50086-2-2-1995 +A11-1998
| 电缆装置用导管系统 第2-2部分：可弯曲导管系统的特殊要求
| Conduit systems for cable management - Part 2-2: Particular requirements for pliable conduit systems
|
| EN 50086-2-3-1995 +A11-1998
| 电缆装置用导管系统 第2-3部分：柔性导管系统的特殊要求
| Conduit systems for cable management - Part 2-3: Particular requirements for flexible conduit systems
|
| EN 50086-2-4-1994 +A1-2001
| 电缆装置用导管系统 第2-4部分：地下导管系统的特殊要求
| Conduit systems for cable management - Part 2-4: Particular requirements for conduit systems buried underground
|
| EN 50098-1-1998+A1-2002
| 信息技术用建筑群中电缆敷设 第1部分：ISDN基本存取
| Customer premises cabling for information technology - Part 1: ISDN basic access
|
| EN 50098-2-1996
| 建筑群中信息技术用电缆敷设 第2部分：千字节/秒ISDN初级多路传送连接和租用专线网络接口
| Customer premises cabling for information technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface
|
| EN 50109-1-1995
| 手动压接工具 低频和射频用电线和电缆压接连接用工具 第1部分：一般要求和试验
| Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 1: General requirements and tests
|
| EN 50109-2-1-1995
| 手动压接工具 低频和射频用电线和电缆压接连接用工具 第2-1部分：射频连接器和同轴接触器的手工压接工具
| Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with fixed dies,sies A to E,V and W
|
| EN 50109-2-2-1995
| 手动压接工具 低频和射频用电线和电缆压接连接用工具 第2-2部分：射频连接器和同轴接触器的手动压接工具
| Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with removadle and inter-changeadle dies,size A to G,Q to T,V and W
|
| EN 50109-2-3-1995
| 手动压接工具 低频和射频用电线和电缆压接连接用工具 第2-3部分：电器插接连接件触点的特殊要求
| Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors
|
| EN 50109-2-4-1995
| 手动压接工具 低频和射频用电线和电缆压接连接用工具 第2-4部分：SMZ系列高频插接连接的中间接点的特殊要
| Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ
|
| EN 50109-2-5-1995
| 手动压接工具 低频和射频用电线和电缆压接连接用工具 第2-5部分：数据总线用带2个内芯的电缆连接的特殊要
| Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications
|
| EN 50117-1-2002
| 同轴电缆 第1部分：通用规范
| Coaxial cables - Part 1: Generic specification / Note: Applies only in conjunction with EN 50290-1-1
|
| EN 50117-2-1-2002
| 同轴电缆 第2-1部分：电缆配电网使用的电缆的分规范 5 MHz 至1000 MHz操作系统使用的室内电压降电缆
| Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks; Indoor drop cables for systems operating at 5 MHz - 1000 MHz / Note: Applies only in conjunction with EN 50117-1
|
| EN 50117-3-1-2002
| 同轴电缆 第3-1部分：电信设备用电缆的分规范 数字通信系统用小型电缆
| Coaxial cables - Part 3-1: Sectional specifications for cables used in telecom applications; Miniaturized cables used in digital communication systems / Note: Applies only in conjunction with EN 50117-1
|
| EN 50117-3-1996
| 电缆配电设备用同轴电缆 第3部分：用户室外引入电缆用分规范
| Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables
|
| EN 50117-4-1996
| 电缆配电设备用同轴电缆 第4部分：配电器和线路电缆用分规范
| Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables
|
| EN 50117-5-1997
| 电缆配电网络用同轴电缆 第5部分：用在频率在5MHz至2150MHz之间网络操作用室内分接电缆分规范
| Coaxial cables used in cabled distribution networks - Part 5: Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
|
| EN 50117-6-1997
| 电缆配电网络用同轴电缆 第6部分：用于频率在5MHz-2150MHz之间网络操作用室外分接电缆分规范
| Coaxial cables used in cabled distribution networks - Part 6: Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
|
| EN 50143-1997+A1-2003
| 无荷载额定输出电压大于1KV小于10KV的标志灯和气体放电管装置用电缆
| Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
|
| EN 50146-2000
| 电力设备用电缆线
| Cable ties for electrical installations
|
| EN 50173-1-2002
| 信息技术 普通电缆系统 第1部分：一般要求和办公区
| Information technology - Generic cabling systems - Part 1: General requirements and office areas
|
| EN 50174-1-2000
| 信息技术 铺设电缆装置 第1部分：规范和质量保证
| Information technology - Cabling installation - Part 1: Specification and quality assurance
|
| EN 50174-2-2000
| 信息技术 铺设电缆装置 第2部分：建筑物内部设施安装的规划及实践
| Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings
|
| EN 50182-2001
| 用于过热总线的导体 圆形同轴多股电缆芯线的导体
| Conductors for overhead lines - Round wire concentric lay stranded conductors / Note: Includes Corrigendum of July 2001
|
| EN 50200-2000
| 用于紧急线路的非保护型小电缆的耐火性试验方法
| Method of test for resistance to fire of unprotected small cables for use in emergency circuits
|
| EN 50214-1997
| 升降机用柔软电缆
| Flexible cables for lifts
|
| EN 50249-2002
| 地下管道和电缆的定位器 性能与安全
| Electromagnetic locators for buried pipes and cables - Performance and safety
|
| EN 50262-1998+A1-2001
| 电气设备用米制电缆密封装置
| Metric cable glands for electrical installations
|
| EN 50264-1-2002
| 铁路应用 具有特殊放火性能的铁路机车车辆电缆 标准外壁 第1部分：基本要求
| Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 1: General requirements
|
| EN 50264-2-2002
| 铁路应用 具有特殊放火性能的铁路机车车辆电缆 标准外壁 第2部分：单芯电缆
| Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 2: Single core cables
|
| EN 50264-3-2002
| 铁路应用 具有特殊放火性能的铁路机车车辆电缆 标准外壁 第3部分：多芯电缆
| Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 3: Multicore cables
|
| EN 50265-1-1998
| 在着火条件下电缆的一般测试方法 单个绝缘导体或电缆耐火焰垂直传播试验 第1部分：装置
| Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1: Apparatus
|
| EN 50265-2-1-1998
| 在着火条件下电缆的一般测试方法 单个绝缘导体或电缆耐火焰垂直传播试验 第2-1部分：方法 1kW预混火焰
| Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - 1 kW pre-mixed flame
|
| EN 50265-2-2-1998
| 在着火条件下电缆的一般测试方法 单个绝缘导体或电缆耐火焰垂直传播试验 第2-2部分：方法 扩散火焰
| Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - Diffusion flame
|
| EN 50266-1-2001
| 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第1部分：装置
| Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Apparatus
|
| EN 50266-2-1-2001
| 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第2-1部分：程序 A
| Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Procedures; Category A F/R / Note: Includes Corrigendum of March 2002
|
| EN 50266-2-2-2001
| 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第2-2部分：程序 A
| Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-2: Procedures; Category A / Note: Includes Corrigendum of March 2002
|
| EN 50266-2-3-2001
| 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第2-3部分：程序 B
| Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-3: Procedures - Category B / Note: Includes Corrigendum of March 2002
|
| EN 50266-2-4-2001
| 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第2-4部分：程序 C
| Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4: Procedures; Category C / Note: Includes Corrigendum of March 2002
|
| EN 50266-2-5-2001
| 在着火条件下电缆的一般测试方法 分布在垂直安装的胶合线或电缆四周的垂直火焰的试验 第2-5部分：程序 D
| Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-5: Procedures; Small cables; Category D / Note: Includes Corrigendum of March 2002
|
| EN 50267-1-1998
| 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第1部分：装置
| Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus
|
| EN 50267-2-1-1998
| 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-1部分：程序 氢卤酸气体量的测
| Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas
|
| EN 50267-2-2-1998
| 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-2部分：程序 通过测量 pH 值和
| Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity
|
| EN 50267-2-3-1998
| 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-3部分：程序 通过测量 pH 值和
| Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity Partly Supersedes HD602S1:1992
|
| EN 50268-1-1999
| 在燃烧条件下电缆的一般试验方法 在规定条件下电缆燃烧烟密度测量 第1部分：仪器
| Common test methods for cable under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus
|
| EN 50268-2-1999
| 在燃烧条件下电缆的一般试验方法 在规定条件下电缆燃烧烟密度测量 第2部分：程序
| Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure
|
| EN 50288-1-2001
| 模拟和数字通信和管理中使用的多元金属电缆 第1部分：通用规范
| Multi-element metallic cables use in analogue and digital communication and control - Part 1: Generic specification
|
| EN 50288-2-1-2001
| 模拟和数字通信和管理中使用的多元金属电缆 第2-1部分：表征100 MHz以上的屏蔽电缆的部分规范 水平及建筑
| Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterized up to 100 MHz; Horizontal and building backbone cables
|
| EN 50288-2-2-2001
| 电缆和数字通信和管理中用的多芯金属电缆 第2-2部分：特征频率达100 MHz屏蔽电缆的部分规范 工作区和中继
| Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterized up to 100 MHz; Work area and patch cord cables
|
| EN 50288-3-1-2001
| 模拟和数字通信和管理中使用的多元金属电缆 第3-1部分：表征100 MHz以上的未屏蔽电缆的部分规范 水平及建
| Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterized up to 100 MHz; Horizontal and building backbone cables
|
| EN 50288-3-2-2001
| 模拟和数字通信和管理中使用的多元金属电缆 第3-2部分：表征100 MHz以上的未屏蔽电缆的部分规范 工作区和
| Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterized up to 100 MHz; Work area and patch cord cables
|
| EN 50288-4-1-2001
| 模拟和数字通信和管理中使用的多元金属电缆 第4-1部分：表征600 MHz以上的屏蔽电缆的部分规范 水平及建筑
| Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterized up to 600 MHz; Horizontal and building backbone cables
|
| EN 50288-4-2-2001
| 模拟和数字通信和管理中使用的多元金属电缆 第4-2部分：表征600 MHz以上的屏蔽电缆的部分规范 工作区和局
| Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterized up to 600 MHz; Work area and patch cord cables
|
| EN 50289-1-1-2001
| 通信电缆 试验方法规范 第1-1部分：电气试验方法 基本要求
| Communication cables - Specifications for test methods - Part 1-1: Electrical test methods; General requirements
|
| EN 50289-1-10-2001
| 通信电缆 试验方法规范 第1-10部分：电气试验方法 串音
| Communication cables - Specifications for test methods - Part 1-10: Electrical test methods; Crosstalk / Note: Applies only in conjunction with EN 50289-1-1
|
| EN 50289-1-11-2001
| 通信电缆 试验方法规范 第1-11部分：电气试验方法 特征阻抗 输入阻抗 回波损耗
| Communication cables - Specifications for test methods - Part 1-11: Electrical test methods; Characteristic impedance, input impedance, return loss / Note: Applies only in conjunction with EN 50289-1-1
|
| EN 50289-1-2-2001
| 通信电缆 试验方法规范 第1-2部分：电气试验方法 DC电阻
| Communication cables - Specifications for test methods - Part 1-2: Electrical test methods; DC resistance
|
| EN 50289-1-3-2001
| 通信电缆 试验方法规范 第1-3部分：电气试验方法 绝缘强度
| Communication cables - Specifications for test methods - Part 1-3: Electrical test methods; Dielectric strength
|
| EN 50289-1-4-2001
| 通信电缆 试验方法规范 第1-4部分：电气试验方法 绝缘电阻
| Communication cables - Specifications for test methods - Part 1-4: Electrical test methods; Insulation resistance / Note: Applies in conjunction with EN 50289-1-1
|
| EN 50289-1-5-2001
| 通信电缆 试验方法规范 第1-5部分：电气试验方法 电容
| Communication cables - Specifications for test methods - Part 1-5: Electrical test methods; Capacitance / Note: Applies in conjunction with EN 50289-1-1
|
| EN 50289-1-6-2002
| 通信电缆 试验方法规范 第1-6部分：电气试验方法 电磁性能
| Communication cables - Specifications for test methods - Part 1-6: Electrical test methods; Electromagnetic performance / Note: Applies in conjunction with EN 50289-1-1
|
| EN 50289-1-7-2001
| 通信电缆 试验方法规范 第1-7部分：电气试验方法 传播速度
| Communication cables - Specifications for test methods - Part 1-7: Electrical test methods; Velocity of propagation / Note: Applies in conjunction with EN 50289-1-1
|
| EN 50289-1-8-2001
| 通信电缆 试验方法规范 第1-8部分：电气试验方法 衰减
| Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation / Note: Applies in conjunction with EN 50289-1-1
|
| EN 50289-1-9-2001
| 通信电缆 试验方法规范 第1-9部分：电气试验方法 衰减不平衡（纵向转换损失、纵向转换传递损失）
| Communications cables - Specifications for test methods - Part 1-9: Electrical test methods; Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)
|
| EN 50289-3-1-2001
| 通信电缆 试验方法规范 第3-1部分：机械试验方法 基本要求
| Communication cables - Specifications for test methods - Part 3-1: Mechanical test methods; General requirements
|
| EN 50289-3-11-2001
| 通信电缆 试验方法规范 第3-11部分：机械试验方法 电缆耐切断性
| Communication cables - Specifications for test methods - Part 3-11: Mechanical test methods; Cable cut-through resistance
|
| EN 50289-3-12-2001
| 通信电缆 试验方法规范 第3-12部分：机械试验方法 强迫性损伤
| Communication cables - Specifications for test methods - Part 3-12: Mechnical test methods; Shot gun damage
|
| EN 50289-3-13-2003
| 通信电缆 试验方法的规范 第3-13部分：机械试验方法 风蚀振动
| Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods; Aeolian vibration / Note: Applies in conjunction with EN 50289-3-1
|
| EN 50289-3-15-2003
| 通信电缆 试验方法规范 第3-15部分：机械试验方法 水下电缆耐液压／注意：和EN 50289-3-1联合使用
| Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods; Underwater cable resistance to hydrostatic pressure / Note: Applies in conjunction with EN 50289-3-1
|
| EN 50289-3-16-2001
| 通信电缆 试验方法规范 第3-16部分：机械试验方法 电缆拉力性能
| Communication cables - Specifications for test methods - Part 3-16: Mechanical test methods; Cable tensile performance
|
| EN 50289-3-17-2002
| 通信电缆 试验方法规范 第3-17部分：机械试验方法 绝缘材料和包皮的粘合力
| Communication cables - Specifications for test methods - Part 3-17: Mechnical test methods; Adhesion of dielectric and sheath / Note: Applies in conjunction with EN 50289-3-1
|
| EN 50289-3-2-2001
| 通信电缆 试验方法规范 第3-2部分：机械试验方法 导体的抗拉强度和延展性
| Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods; Tensile strength and elongation for conductor
|
| EN 50289-3-4-2001
| 通信电缆 试验方法规范 第3-4部分：机械试验方法 绝缘体和包层的抗拉强度 延展性和收缩性
| Communication cables - Specifications for test methods - Part 3-4: Mechanical test methods; Tensile strength, elongation and shrinkage of insulation and sheath
|
| EN 50289-3-5-2001
| 通信电缆 试验方法规范 第3-5部分：机械试验方法 电缆的抗挤压性
| Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods; Crush resistance of the cable
|
| EN 50289-3-6-2001
| 通信电缆 试验方法规范 第3-6部分：机械试验方法 电缆的抗冲击性
| Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods; Impact resistance of the cable
|
| EN 50289-3-7-2001
| 通信电缆 试验方法规范 第3-7部分：机械试验方法 电缆包皮的耐腐蚀性
| Communication cables - Specifications for test methods - Part 3-7: Mechanical test methods; Abrasion resistance of the cable sheath
|
| EN 50289-3-8-2001
| 通信电缆 试验方法规范 第3-8部分：机械试验方法 电缆包皮标志的耐腐蚀性
| Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods; Abrasion resistance of cable sheath markings
|
| EN 50289-3-9-2001
| 通信电缆 试验方法规范 第3-9部分：机械试验方法 弯曲试验
| Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods; Bending tests
|
| EN 50289-4-1-2001
| 通信电缆 试验方法规范 第4-1部分：环境试验方法 基本要求
| Communication cables - Specifications for test methods - Part 4-1: Environmental test methods; General requirements
|
| EN 50289-4-11-2002
| 通信电缆 试验方法规范 第4-11部分：环境试验方法 汇集在水平方向上的耐火试验
| Communication cables - Specifications for test methods - Part 4-11: Environmental test methods; A horizontal integrated fire test method
|
| EN 50289-4-14-2003
| 通信电缆 试验方法的规范 第3-14部分：环境试验方法 闪电
| Communication cables - Specifications for test methods - Part 4-14: Environmental test methods; Lightning / Note: Applies in conjunction with EN 50289-3-1
|
| EN 50289-4-2-2001
| 通信电缆 试验方法规范 第4-2部分：环境试验方法 浸水
| Communication cables - Specifications for test methods - Part 4-2: Environmental test methods; Water penetration
|
| EN 50289-4-6-2001
| 通信电缆 试验方法规范 第4-6部分：环境试验方法 温度的周期性变化
| Communication cables - Specifications for test methods - Part 4-6: Environmental test methods; Temperature cycling
|
| EN 50289-4-9-2001
| 通信电缆 试验方法规范 第4-9部分：环境试验方法 耐气压试验
| Communication cables - Specifications for test methods - Part 4-9: Environmental test methods; Pneumatic resistance
|
| EN 50290-2-20-2001
| 通信电缆 第2-20部分：通用的设计原理及结构 总则
| Communication cables - Part 2-20: Common design rules and construction; General
|
| EN 50290-2-21-2001
| 通信电缆 第2-21部分：通用的设计原理及结构 PVC绝缘化合物
| Communication cables - Part 2-21: Common design rules and construction; PVC insulation compounds
|
| EN 50290-2-22-2001
| 通信电缆 第2-22部分：通用的设计原则及结构 PVC包皮化合物
| Communication cables - Part 2-22: Common design rules and construction; PVC sheating compounds
|
| EN 50290-2-23-2001
| 通信电缆 第2-23部分：通用的设计原理及结构 PE绝缘体
| Communication cables - Part 2-23: Common design rules and construction; PE insulation
|
| EN 50290-2-24-2002
| 通信电缆 第2-24部分：通用的设计原理及结构 PE包皮
| Communication cables - Part 2-24: Common design rules and construction; PE sheathing / Note: Applies only in conjunction with EN 50290-2-20
|
| EN 50290-2-25-2002
| 通信电缆 第2-25部分：通用的设计原理及结构 聚丙烯绝缘化合物
| Communication cables - Part 2-25: Common design rules and construction; Polypropylene insulation compounds / Note: Applies only in conjunction with EN 50290-2-20
|
| EN 50290-2-26-2002
| 通信电缆 第2-26部分：通用的设计原理及结构 无卤阻燃热塑化合物
| Communication cables - Part 2-26: Common design rules and construction; Halogen free flame retardant insulation compounds / Note: Applies only in conjunction with EN 50290-2-20
|
| EN 50290-2-27-2002
| 通信电缆 第2-27部分：通用的设计原理及结构 无卤阻燃热塑包复物
| Communication cables - Part 2-27: Common design rules and construction; Halogen free flame retardant thermoplastic sheathing compounds / Note: Applies only in conjunction with EN 50290-2-20
|
| EN 50290-2-28-2002
| 通信电缆 第2-28部分：通用的设计原理及结构 满充电缆的填充复合物
| Communication cables - Part 2-28: Common design rules and construction; Filling compounds for filled cables / Note: Applies only in conjunction with EN 50290-2-20
|
| EN 50290-2-29-2002
| 通信电缆 第2-29部分：通用的设计原理及结构 交联PE绝缘复合物
| Communication cables - Part 2-29: Common design rules and construction; Cross-linked PE insulation compounds / Note: Applies only in conjunction with EN 50290-2-20
|
| EN 50290-2-30-2002
| 通信电缆 第2-30部分：通用的设计原理及结构 聚（四氟乙烯－六氟烯）（FEP）绝缘及包复物
| Communication cables - Part 2-30: Common design rules and construction; Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing / Note: Applies only in conjunction with EN 50290-2-20
|
| EN 50290-4-1-2001
| 通信电缆 第4-1部分：电缆用途总则：环境条件及安全问题
| Communication cables - Part 4-1: General considerations for the use of cables; Environmental conditions and safety aspects
|
| EN 50299-2002
| 最高电压为72.5kV至550KV设备的变压器和电抗器用油浸电缆连接组件
| Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV
|
| EN 50305-2002
| 铁路应用 有特殊防火性能的铁路机车车辆电缆 试验方法
| Railway applications - Railway rolling stock cables having special fire performance - Test methods
|
| EN 50306-1-2002
| 铁路设施 有专门防火性能的铁路车辆电缆 薄壁 第1部分：一般要求
| Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 1: General requirements
|
| EN 50306-2-2002
| 铁路设施 有专门防火性能的铁路车辆电缆 薄壁 第2部分：单芯电缆
| Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 2: Single core cables
|
| EN 50306-3-2002
| 铁路设施 有专门防火性能的铁路车辆电缆 薄壁 第3部分：单芯和多芯电缆（二芯、三芯和四芯）的屏障及薄
| Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed
|
| EN 50306-4-2002
| 铁路设施 有专门防火性能的铁路车辆电缆 薄壁 第4部分：多芯和多对电缆的标准壁护套
| Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 4: Multicore and multipair cables standard wall sheathed
|
| EN 50307-2002
| 铅与铅合金 电缆的铅与铅合金包皮和电缆套
| Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables
|
| EN 50334-2001
| 识别芯线的电缆的注册标记
| Marking by inscription for the identification of cores of electric cables
|
| EN 50336-2002
| 不大于36kV的变压器和电抗器电缆箱的套筒
| Bushings for transformers and reactor cable boxes not exceeding 36 kV
|
| EN 50340-2001
| 液压电缆切割器 在额定电压高达AC 30 kV的电气设施上使用的装置
| Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV / Note: Includes Corrigendum of February 2002
|
| EN 50343-2003
| 铁路设备 机车车辆 安装电缆规则
| Railway applications - Rolling stock - Rules for installation of cabling
|
| EN 50355-2003
| 铁路设备 具有特殊防火性能的铁路机车车辆电缆 薄内壁和标准内壁 使用指南
| Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall; Guide to use
|
| EN 50356-2002
| 电缆的火花试验方法
| Method for spark testing of cables
|
| EN 50362-2003
| 应急电路中使用的较大未保护电源和控制电缆的防火试验方法
| Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
|
| EN 50368-2003
| 电气装置用电缆夹具
| Cable cleats for electrical installations
|
| EN 60169-23-1993
| 射频连接器 第23部分：与3.5mm刚性精密同轴电缆配用外导体内径3.5mm(0.1378in）的插针插孔式射频连接器
| Radio-frequency connectors- part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) (IEC 60169-23:1991)
|
| EN 60169-24-1993
| 射频连接器 第24部分：典型用于75Ω电缆分配系统、螺纹连接射频同轴连接器（F型）
| Radio-frequency connectors- part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75Ω cable distribution systems (type F) (IEC 60169-24:1991)
|
| EN 60169-25-1993
| 射频连接器 第25部分：与双芯屏蔽对称电缆配用、外导体内径为13.56mm(0.534in)的双极螺纹连接连接器（TWHN
| Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN) (IEC 60169-25:1992)
|
| EN 60230-2002
| 电缆极其附件的冲击电压试验
| Impulse tests on cables and their accessories (IEC 60230:1966)
|
| EN 60371-3-8-1995
| 以云母为基材的绝缘材料 第3部分：单项材料规范 活页8：耐燃烧安全电缆用云母纸带
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables (IEC 60371-3-8:1995 + Corrigendum 1995)
|
| EN 60439-5-1996+A1-1998
| 低压开关设备和控制设备组合装置 第5部分：公共场所户外安装用组合装置（CDCs）的特殊要求 用于电网中配
| Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks (IEC 60439-5:1996)
|
| EN 60465-1990
| 充油电缆用的未使用过的绝缘矿物油规范
| Specification for unused insulating mineral oils for cables with oil ducts (IEC 60465:1988)
|
| EN 60603-9-1998
| 印制板用频率低于3MHz的连接器 第９部分：2.54mm(0.1in)基本网格印制电路板、底板和电缆连接器用两对端连
| Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990)
|
| EN 60702-1-2002
| 额定电压750V及以下矿物绝缘电缆 第1部分：电缆
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables (IEC 60702-1:2002)
|
| EN 60702-2-2002
| 额定电压750V及以下矿物绝缘电缆 第2部分：终端
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations (IEC 60702-2:2002)
|
| EN 60719-1993
| 额定电压达450/750V及以下圆形铜导线电缆的平均外形尺寸上下限的计算
| Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V (IEC 60719:1992)
|
| EN 60794-1-1-2002
| 光学纤维电缆 第１－１部分：总规范 总则
| Optical fibre cables - Part 1-1: Generic specification; General (IEC 60794-1-1:2001)
|
| EN 60794-1-2-1999 +A-2002
| 光学纤维电缆 第1-2部分：总规范 光缆基本试验程序
| Optical fibre cables - Part 1-2: General specification - Basic optical cable test procedures (IEC 60794-1-2:1999)
|
| EN 60794-1-2/prA2-2002
| 光学纤维电缆 第1-2部分：总规范 光缆基本试验程序 修改草案２
| Optical fibre cables - Part 1-2: Generic specification; Basic optical cable test procedures
|
| EN 60794-2-10-2003
| 光纤电缆 第2-10部分：室内电缆 单电缆和双电缆的族规范
| Optical fibre cables - Part 2-10: Indoor cables; Family specification for simplex and duplex cables (IEC 60794-2-10:2003) / Note: Endorsement notice
|
| EN 60794-2-20-2003
| 光纤电缆 第2-20部分：室内电缆 多光纤配电电缆的族规范
| Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables (IEC 60794-2-20:2003) / Note: Endorsement notice
|
| EN 60794-2-2003
| 光纤电缆 第2部分：室内电缆 分规范
| Optical fibre cables - Part 2: Indoor cables; Sectional specification (IEC 60794-2:2002) / Note: Endorsement notice. Applies only in conjunction with EN 60794-1-1 (2002) and EN 60794-1-2 (1999)
|
| EN 60794-2-30-2003
| 光纤电缆 第2-30部分：室内电缆 光纤带状电缆的族规范
| Optical fibre cables - Part 2-30: Indoor cables; Family specification for optical fibre ribbon cables (IEC 60794-2-30:2003) / Note: Endorsement notice
|
| EN 60794-3-10-2002
| 光纤电缆 第3-10部分：室外电缆 管道和直接填埋的通讯光缆的族规范
| Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables (IEC 60794-3-10:2002, modified) / Note: Endorsement notice
|
| EN 60794-3-20-2002
| 光学纤维电缆 第3-20部分：室外电缆 自立式架空通讯光缆的族规范
| Optical fibre cables - Part 3-20: Outdoor cables; Family specification for optical self-supporting aerial telecommunication cables (IEC 60794-3-20:2002, modified) / Note: Endorsement notice
|
| EN 60794-3-2002
| 光学纤维电缆 第３部分：分规范 户外电缆
| Optical fibre cables - Part 3: Sectional specification; Outdoor cables (IEC 60794-3:2001)
|
| EN 60794-3-30-2003
| 光纤电缆 第3-30部分：室外电缆 穿越湖、江的通讯光缆的族规范
| Optical fibre cables - Part 3-30: Outdoor cables; Family specification for optical telecommunication cables for lake and river crossings (IEC 60794-3-30:2002) / Note: Endorsement notice. Applies only in conjunction with EN 60794-1-1 (2002), EN 60794-1-2
|
| EN 60811-1-1-1995+A1-2001
| 电缆绝缘和护套材料 通用试验方法 第1部分：一般应用方法 第1节：厚度和总尺寸的测量 机械性能测定试验
| Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties (IEC 60811-1-1:1993)
|
| EN 60811-1-2-1995 +A2-2000
| 电缆绝缘和护套材料 通用试验方法 第1部分：一般应用方法 第2节：热老化方法
| Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 2: Thermal ageing methods (IEC 60811-1-2:1985 + corrigendum 1986 + A1:1989)
|
| EN 60811-1-3-1995 +A1-2001
| 电缆绝缘和护套材料通用试验方法 第１部分：一般应用方法 第３节：密度测定方法 吸水试验 收缩试验
| Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 3: Methods for determining the density - Water absorption tests - Shrinkage test (IEC 60811-1-3:1993)
|
| EN 60811-1-4-1995 +A2-2001
| 电缆绝缘和护套材料 通用试验方法：第1部分：一般应用方法 第4节：低温试验
| Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 4: Test at low temperature (IEC 60811-1-4:1985 + corrigendum 1986 + A1:1993)
|
| EN 60811-2-1-1998 +A1-2001
| 电缆绝缘和护套材料 通用试验方法 第2-1部分：合成橡胶专用方法 抗臭氧试验 热固试验和矿物油浸试验
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests (IEC 60811-2-1:1998)
|
| EN 60811-3-1-1995 +A1-1996+A2-2001
| 电缆的绝缘和护套材料 通用试验方法 第3部分：.聚氯乙烯(PVC)化合物专用方法 第1节：高温下压力试验 耐
| Insulating and sheathing materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking (IEC 60811-3-1:1985 + Corrigendum 1986)
|
| EN 60811-3-2-1995
| 电缆绝缘和护套材料 通用试验方法 第3部分：聚氯乙烯复合物专用方法 第2节：质量损失试验 热稳定性试验
| Insulating and sheathing materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds - Section 2: Loss of mass test - Thermal stability test (IEC 60811-3-2:1985 + Corrigendum 1986 + A1:1993)
|
| EN 60811-4-1-1995
| 电缆绝缘护套材料 通用试验方法 第4部分：聚乙烯和聚丙烯化合物专用方法 第1节：耐环境应力破裂性 在空
| Insulating and sheathing materials of electric cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 1: Resistance to environmental stress cracking - Wrapping test after thermal ageing in air - Meas
|
| EN 60811-4-2-1999
| 电缆绝缘和护套材料 通用试验方法 第4部分：聚乙烯和聚丙烯化合物专用方法 第2节：预处理后抗拉强度和断
| Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Tensile strength and elongation at break after pre-conditioning-Wrapping text often thermal ageing in air-Measurement of mass increase-Long-term stablity text-Text method for Copper-cotalyed oxidation
|
| EN 60811-5-1-1999
| 电缆绝缘和护套材料通用试验方法 第5部分：填充复合物的专用方法 第1节：滴点 油分离 较低温脆性 总酸
| Insulating and sheathing materials of electric cables and optical fibre cables - Common test methods - Part 5: Methods specific to filling compounds - Section 1: Drop point; separation of oil - lower temperature brittleness; total acid number; absence of
|
| EN 60874-17-1997
| 光纤和电缆的接头 第１７部分：纤维光学接头的部分规范 F-05型(磨擦锁定)
| Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) (IEC 60874-17:1995 + Corrigendum 1996)
|
| EN 60885-2-2003
| 电缆的电气试验方法 第2部分：局部放电试验
| Electrical test methods for electric cables - Part 2: Partial discharge tests (IEC 60885-2:1987) / Note: Endorsement notice
|
| EN 60885-3-2003
| 电缆的电气试验方法 第3部分：局部放电试验 挤压电力电缆段局部放电测量的试验方法
| Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:1988) / Note: Endorsement notice
|
| EN 60966-1-1999
| 射频与同轴电缆组件 第1部分：总规范 一般要求和试验方法
| Radio frequency and coaxial cables assemblies - Part 1: Generic specification - General requirements and test methods (IEC 60966-1:1999)
|
| EN 60966-2-1-1995+A1-1997
| 射频和同轴电缆组件 第2-1部分：柔软同轴电缆组件分规范
| Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies (IEC 60966-2-1:1991)
|
| EN 60966-2-2-1994
| 射频和同轴电缆组件 第2－2部分：柔软性同轴电缆组件空白详细规范
| Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies (IEC 60966-2-2:1992)
|
| EN 60966-2-3-1999
| 射频和同轴电缆部件 第2-3部分：柔软同轴电缆部件的详细规范
| Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies (IEC 60966-2-3:1996)
|
| EN 60966-2-4-2003
| 射频与同轴电缆组件 第2-4部分：无线电和电视接收机用电缆部件详细规范（频率范围0至3000MHz的IEC60169-2
| Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-2 connectors (IEC 60966-2-4:2003) / Note: Endorsement notice
|
| EN 60966-2-5-2003
| 射频和同轴电缆组件 第2-5部分：无线电和电视接收机用电缆组件的详细规格 频率范围在0至1000 MHz
| Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1000 MHz, IEC 60169-2 connectors (IEC 60966-2-5:2003) / Note: Endorsement notice
|
| EN 60966-2-6-2003
| 射频和同轴电缆组件 第2-6部分：电视和无线电接收机用电缆组件的详细规格 频率范围在0至3000 MHz,IEC 601
| Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-24 connectors (IEC 60966-2-6:2003) / Note: Endorsement notice
|
| EN 60966-3-1-1994
| 射频和同轴电缆组件 第3－1部分：半柔软同轴电缆组件空白详细规范
| Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies (IEC 60966-3-1:1992)
|
| EN 60966-3-1994
| 射频和同轴电缆组件 第3部分：半柔软同轴电缆组件分规范
| Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 60966-3:1992)
|
| EN 60966-3-2-1999
| 射频和同轴电缆部件 第3-1部分：.GSM(0.8GHz-1GHz)用半柔软同轴电缆部件的详细规范
| Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) (IEC 60966-3-2:1996)
|
| EN 60966-4-1-1994
| 射频和同轴电缆部件 第4-1部分：半硬性同轴电缆组件空白详细规范
| Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies (IEC 60966-4-1:1994)
|
| EN 60966-4-1994
| 射频和同轴电缆部件 第4部分：半硬性同轴电缆组件分规范
| Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:1992)
|
| EN 60974-12-1995
| 弧焊设备 第12部分：焊接电缆的连接器
| Arcwelding equipment - Part 12: Coupling devices for welding cables (IEC 60974-12:1992, modified)
|
| EN 61076-4-110-2002
| 电子设备用连接器 第4-110部分：有质量评定的印制板连接器 包括完全屏蔽和闭锁功能的基本网格为2.0mm闭锁
| Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function (IEC 61076-4-110:2001)
|
| EN 61076-7-2000
| 直流低频模拟及数字高速数据应用系统用连接器 第7部分：有质量评定的包括鉴定和能力批准的电缆引出端附件
| Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval; Sectional specification (IEC 61076-7:2000)
|
| EN 61138-1997 +A11-2003
| 便携式接地和短路设备用电缆
| Cables for portable earthing and short-circuiting equipment (IEC 61138:1994 + A1:1995, modified)
|
| EN 61169-24-2001
| 射频连接器 第24部分：分规范 带有螺旋联接器、通常用于75Ω电缆分配系统(F型)的射频同轴连接器
| Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable distribution systems (type F) (IEC 61169-24:2001)
|
| EN 61196-2-2003
| 射频电缆 规范 第2部分：聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范
| Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995) / Note: Endorsement notice
|
| EN 61196-3-1998
| 射频电缆 第3部分：局域网用同轴电缆分规范
| Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998)
|
| EN 61196-3-2-1997
| 射频电缆 第3-2部分：水平层布线数字通信用同轴电缆 有效半径为185m、速率10Mb/s及以下的局域网用实心介
| Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997)
|
| EN 61196-3-3-1997
| 射频电缆 第3-3部分：水平层布线数字通信用同轴电缆 有效半径为185m、速率10Mb/s及以下的局域网用泡沫介
| Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997)
|
| EN 61238-1-2003
| 额定电压达 30 kV 的电力电缆的压缩和机械连接器 第1部分：试验方法和要求
| Compression and mechanical connectors for power cables for rated voltages up to 36 kV (U<(Index)m> = 42 kV) - Part 1: Test methods and requirements (IEC 61238-1:2003, modified) / Note: Endorsement notice
|
| EN 61300-2-35-1997
| 光纤互连器件和无源元件 基本试验和测量程序 第2-35部分：试验 电缆章动
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests-Cable nutation (IEC 61300-2-35:1995)
|
| EN 61300-2-4-1997
| 光纤互连器件和无源元件 基本试验和测量程序 第2-4部分：试验 纤维/电缆保持力
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention (IEC 61300-2-4:1995)
|
| EN 61313-1-1997
| 光纤无源器件和电缆组件 第1部分：能力批准 通用规范
| Fibre optic passive components and cable assemblies - Part 1: Capability approval - Generic specification (IEC 61313-1:1995)
|
| EN 61316-1999
| 工业电缆卷筒
| Industrial cable reels (IEC 61316:1999)
|
| EN 61515-1996
| 矿物绝缘热电偶电缆和热电偶
| Mineral insulated thermocouple cables and thermocouples (IEC 61515:1995)
|
| EN 61537-2001
| 电缆管理用电缆托架系统和电缆梯系统
| Cable tray systems and cable ladder systems for cable management (IEC 61537:2001)
|
| EN 61726-2000
| 电缆组件、电缆、连接器和无源微波元件 混响室法测量屏蔽衰减
| Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:1999)
|
| EN 61935-1-2000 +A1-2002
| 通用布线系统 根据ISO/IEC 11801对对称通信布线进行检验的规范 第1部分：电缆敷设
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling (IEC 61935-1:2000)
|
| EN 61935-2-2003
| 通用布线系统 根据EN 50173对对称通信布线进行检验的规范 第2部分：中继电缆和施工场所软线
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 - Part 2: Patch cords and work area cords (IEC 61935-2:2003) / Note: Endorsement notice. Includes Corrigendum of September 2003
|
| EN 62012-1-2002
| 恶劣环境下使用的数字通信用多芯和对称双芯/四芯电缆 第1部分：通用规范
| Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification (IEC 62012-1:2002) / Note: Endorsement notice
|
| EN 62037-1999
| 射频连接器、连接器电缆组件和电缆 互调电平测量
| RF connectors, connector cable assemblies and cables - Intermodulation level measurement (IEC 62037:1999)
|
| EN ISO 10807-1996
| 管道工程 在爆燃性空气中电缆保护用皱纹软金属管组件
| Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere (ISO 10807:1994)
|
| EN ISO 5828-2001
| 电阻焊设备 连接水冷接头的二次连接电缆 尺寸及特性
| Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001)
|
| EN ISO 6551-1995
| 石油液体和气体 动态测量的精度和可靠性 电脉冲数据和／或电子脉冲数据的电缆传输
| Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982)
|
| EN ISO 8205-1-2002
| 电阻焊接水冷次级线圈连接电缆 第1部分：双导体连接电缆的尺寸和要求
| Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002)
|
| EN ISO 8205-2-2002
| 电阻焊接水冷次级线圈连接电缆 第2部分：单根导线连接电缆的尺寸和要求
| Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002)
|
| EN ISO 8205-3-1996
| 电阻焊接水冷次级线圈连接电缆 第3部分：试验要求
| Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:1993)
|
| ENV 50213-1998
| 机场照明用的金属屏蔽电缆
| Metallic screened cables for airfield lighting
|
| HD 120 S1-1977
| 特性阻抗和射频同轴电缆的尺寸
| Characteristic impedances and dimensions of radio-frequency coaxial cables
|
| HD 134.5 S1-1977
| 射频连接器 第5部分：96号IEC 60050-17电缆和更大号电缆用射频同轴连接器
| Radio-frequency connectors-part 5: R.F. coaxial connectors for cables 96 IEC 60050-17 and larger
|
| HD 134.6 S1-1977
| 射频连接器 第6部分：96号IEC 60075-17电缆和更大号电缆用射频同轴连接器
| Radio-frequency connectors; part 6: R.F. coaxial connectors for cables 96 IEC 60075-17 and larger
|
| HD 21.1 S4-2002
| 额定电压为450/750V及以下的热塑性塑料绝的电缆 第1部分：一般要求
| Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 1: General requirements
|
| HD 21.10 S2-2001
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第10部分：可延长导线
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 10: Extensible leads
|
| HD 21.11 S1-1995+A1-2001
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第11部分：光源电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 11: Cables for luminaires
|
| HD 21.12 S1-1994 +A1-2001
| 额定电压450/750V的聚氯乙烯绝缘电缆 第12部分：耐热软电缆(软线)
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat-resistant flexible cables (cords)
|
| HD 21.13 S1-1995 +A1-2001
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第13部分：带2个或更多导体的耐油聚氯乙烯铠装电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 13: Oil resistant PVC sheated cables with two or more conductors
|
| HD 21.14 S1-2003
| 额定电压450/750V及以下的热塑性塑料绝的电缆 第14部分：非卤素热塑性塑料化合物的绝缘和包覆的软电缆(软
| Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 14: Flexible cables (cords), insulated and sheathed with halogen-free thermoplastic compounds
|
| HD 21.2 S3-1997
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第2部分：试验方法
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
|
| HD 21.3 S3-1995 +A1-1999
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第3部分：固定布线用非铠装电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring (IEC 60227-3:1993, modified)
|
| HD 21.4 S2-1990
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第4部分：固定配线的铠装电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
|
| HD 21.5 S3-1994 +A1-1999+A2-2001
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第5部分：软电缆(软线)
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 5: flexible cables (cords) (IEC 60227-5:1979, modified)
|
| HD 21.7 S2-1996+A1-1999
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第7部分：温度达90摄氏度的导体内部配线用单芯非铠装电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Single core non-sheathed cables for internal wiring for a conductor temperature of 90℃
|
| HD 21.8 S2-1999
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第8部分：装饰链用单芯非铠装电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 8: Single core non-sheathed cables for decorative chains
|
| HD 21.9 S2-1995 +A1-1999
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆 第9部分：低温安装用单芯非铠装电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheated cable for installation at low temperatures
|
| HD 22.1 S4-2002
| 额定电压450/750V及以下的交联橡胶绝缘电缆 第1部分：一般要求
| Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 1: General requirements
|
| HD 22.10 S1-1994+A1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第10部分：EPR绝缘和聚亚安脂铠装软电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 10: EPR insulated and polyurethane sheathed flexible cable
|
| HD 22.11 S1-1995 +A1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第11部分：EVA软线和软电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 11: EVA cords and flexible cables
|
| HD 22.12 S1-1996 +A1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第12部分：耐热EPR软线和软电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat resistant EPR cords and flexible cables
|
| HD 22.13 S1-1996+A1-2000
| 额定电压450/750V及以下的橡胶绝缘电缆 第13部分：烟雾和腐蚀性气体低排放的绝缘和交联聚合物单芯和多芯软
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13: Single and multicore flexible cables, insulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases
|
| HD 22.14 S2-2002
| 额定电压450/750V及以下的交联橡胶绝缘电缆 第14部分：要求高软度设施用软线
| Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 14: Cords for applications requiring high flexibility
|
| HD 22.15 S1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第15部分：绝缘并包覆耐热硅树脂橡胶的多芯电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber
|
| HD 22.16 S1-2000
| 额定电压450/750V及以下的橡胶绝缘电缆 第16部分：防水聚氯丁烯或相同的合成橡胶铠装电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 16: Water resistant polychloroprene or equivalent synthetic elastomer sheathed cables
|
| HD 22.2 S3-1997
| 额定电压450/750V及以下的橡胶绝缘电缆 第2部分：试验方法
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
|
| HD 22.3 S3-1995 +A1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第3部分：耐热硅树脂橡胶绝缘电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone rubber insulated cables (IEC 60245-3:1980, modified) / Note: To be replaced by prHD 22.3 S4 (2003-05).
|
| HD 22.4 S3-1995 +A1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第4部分：软线和软电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables (IEC 60245-4:1994, modified) / Note: To be replaced by prHD 22.4 S4 (2003-05).
|
| HD 22.6 S2-1995 +A1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第6部分：弧焊电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 6: Arc welding cables / Note: To be amended by HD 22.6 S2/prA2 (2003-05).
|
| HD 22.7 S2-1995+A1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第7部分：温度达110°C的导体内部配线用耐增温电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 7: Cables with increased heat resistance for internal wiring for a conductor temperature of 110℃ / Note: To be amended by HD 22.7 S2/prA2 (2003-05).
|
| HD 22.8 S2-1994+A1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第8部分：装饰链用聚氯丁烯或相同的合成橡胶铠装电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 8: Polychloroprene or equivalent synthetic elastomer sheathed cable for decorative chains / Note: To be amended by HD 22.8 S2/prA2 (2003-05).
|
| HD 22.9 S2-1995+A1-1999
| 额定电压450/750V及以下的橡胶绝缘电缆 第9部分：烟雾和腐蚀性气体低排放的固定配线用单芯非铠装电缆
| Rubber insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases
|
| HD 27 S1-1974
| 软电缆和软线芯体的颜色
| Colours of the cores of flexible cables and cords
|
| HD 308 S2-2001
| 电缆芯和软线的识别
| Identification of cores in cables and flexible cords
|
| HD 359 S2-1990
| 聚氯乙烯护套扁式电梯电缆
| Flat polyvinylchloride sheathed lift cables
|
| HD 361 S3-1999
| 电缆设备系统
| System for cable designation
|
| HD 364 S2-1983
| 医疗X光设备用高压电缆插头和插座连接
| High-voltage cable plug and socket connections for medical X-ray equipment
|
| HD 383 S2-1986+A1 -1989+A2-1993
| 绝缘电缆的导线 环形导线公差极限指南
| Conductors of insulated cables; guide to the dimensional limits of circular conductors
|
| HD 428.2.1 S1-1994
| 50 Hz、50 至2500 kVA、设备最高电压不超过36 kV 的三相油浸式配电变压器 第2部分：高压和/或低压端带有电
| Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high voltage and/or low voltage side - Section 1: General req uirements
|
| HD 428.2.2 S1-1997
| 50 Hz、50 至2500 kVA、设备最高电压不超过36 kV 的三相油浸式配电变压器 第2部分：高压和/或低压端带有电
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Section 2: Cable boxes
|
| HD 428.2.3 S1-1998
| 50 Hz、50 至2500 kVA、设备最高电压不超过36 kV 的三相油浸式配电变压器 第2部分：高压和/或低压端带有电
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Section 3: Cable boxes
|
| HD 446.3 S1-1993
| 热电偶 第3部分：扩展和补偿电缆 公差和识别系统
| Thermocouples; Part 3: Extension and compensating cables; Tolerances and identification system (IEC 60584-3:1989, modified)
|
| HD 489 S1-1987
| 射频电缆和连接器用六边形和方形压接模型腔、压锥、标准规、外导体压接套和中心接触压接圆筒的推荐性尺寸
| Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors
|
| HD 516 S2-1997 +A1-1997
| 低压协调电缆的使用指南
| Guide to use of low voltage harmonized cables
|
| HD 586.3 S1-2001
| 额定电压不超过750V的矿物绝缘电缆 第3部分：使用指南
| Mineral insulated cables with a rated voltage not exceeding 750 V - Part 3: Guide to use
|
| HD 603 S1-1994 +A1-1997
| 额定电压0.6/1 kV的配电电缆
| Distribution cables of rated voltage 0,6/1 kV
|
| HD 604 S1-1994 +A1-1997
| 发电站用具有特殊防火性能的0.6/1kV电力电缆
| 0.6/1 kV power cables with special fire performance for use in power stations
|
| HD 605 S1-1994+A1-1996 +A2-2001+A3-2002
| 电缆 附加试验方法
| Electrical cables - Additional test methods / Note: To be amended by HD 605 S1/prA4 (2003-08).
|
| HD 609 S1-1995
| 数字和模拟通信用设备电缆分规范
| Sectional specification for equipment cables to be used for digital and analogue communication
|
| HD 620 S1-1996 +A1-2001
| 额定电压3.6/6 (7.2) kV 至 20.8/36 (42) kV的挤压绝缘配电电缆
| Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV
|
| HD 621 S1-1996 +A1-2001
| 中压树脂浸渍纸绝缘配电电缆
| Medium voltage impregnated paper insulated distribution cables
|
| HD 622 S1-1996 +A1-2000
| 发电站使用的、具有特殊防火性能的、额定电压从3.6/6 (7.2) kV 至 20.8/36 (42) kV并包括20.8/36 (42) kV的
| Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations
|
| HD 623 S1-1996+A1-2001
| 额定电压 0.6/1.0 kV 配电电缆的接头、止动端和室外终端规范
| Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV / Note: To be replaced by prEN 50393 (2003-07).
|
| HD 626 S1-1996 +A1-1997+A2-2002
| 额定电压0.6/1 (1.2) kV的高架配电电缆
| Overhead distribution cables of rated voltage U<(Index)o>/U(U<(Index)m>): 0,6/1 (1,2) kV
|
| HD 627 S1-1996 +A1-2000
| 电力电缆 地上和地下安装的多芯和多对电缆
| Power cables - Multicore and multipair cable for installation above and below ground
|
| HD 628 S1-1996+A1-2001
| 额定电压3.6/6 kV至20.8/36 kV并包括20.8/36 kV的电力电缆附件的试验方法
| Test methods for accessories for power cables with rated voltage from 3,6/6 kV(Um = 7,2 kV) up to and including 20,8/36 kV(Um = 42 kV)
|
| HD 629.1 S1-1996 +A1-2001
| 额定电压3.6/6 kV至20.8/36 kV的电力电缆用附件的试验要求 第1部分：挤压绝缘电缆
| Test requirements on accessories for use on power cables of rated voltages from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 1: Cables with extruded insulation / Note: To be replaced by prHD 629.1 S2 (2003-10).
|
| HD 629.2 S1-1997 +A1-2001
| 额定电压3.6/6(7.2) kV至20.8/36(42) kV的电力电缆用附件的试验要求 第2部分：树脂浸渍纸绝缘电缆
| Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 2: Cables with impregnated paper insulation / Note: To be replaced by prHD 629.2 S2 (2003-10).
|
| HD 631.1 S1-1998
| 材料特性 第1部分：电缆附件中使用的化合物：硫化前和硫化状态下的树脂化合物
| Material characterisation - Part 1: Compounds for use in cable accessories: Resinous compounds before cure and in the cured state
|
| HD 632 S1-1998
| 额定电压36 kV 至150 kV的挤压绝缘电力电缆及其附件
| Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV)
|
| HD 633 S1-1997
| 交流电压400 kV及以下的注油(注液)、纸和聚丙烯纸层薄板绝缘、金属护套电缆及附件的试验
| Tests on oil-filled (fluid-filled), paper- and polypropylene paper laminate-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um=420 kV)
|
| HD 634 S1-1997
| 交流电压275 kV及以下的内部气压电缆及附件的试验
| Tests on internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (U<(Index)m>=300 kV)
|
| HD 635 S1-1997
| 交流电压275 kV及以下的外部气压电缆及附件的试验
| Tests on external gas-pressure (gas compression) cables and accessories for alternating voltages up to and including 275 kV (U<(Index)m>=300 kV)
|
| prEN 14280-2001
| 地下电缆管道的塑料管线系统 未增塑聚氯乙烯 塑料管、管件及管线规范
| Plastics piping systems for buried cable ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system
|
| prEN 14282-2001
| 地下电缆管道的塑料管线系统 聚丙烯 塑料管、管件及管线规范
| Plastics piping systems for buried cable ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system
|
| prEN 177000-1992
| 通用规范：光纤连接器/电缆组件 能力批准
| Generic specification: optical fibre connector/cable assemblies; capability approval
|
| prEN 2084-2000
| 航空航天系列 铜和铜合金导体的一般用途的单芯电缆 技术规范
| Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification
|
| prEN 2234-2001
| 航空航天系列 耐火电缆 技术规则
| Aerospace series - Cable, electrical, fire resistant - Technical specification
|
| prEN 2235-1999
| 航空航天系列 屏蔽和护套单芯和多芯电缆
| Aerospace series - Single and multicore electric cables, screened and jacketed
|
| prEN 2266-002-2000
| 航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第002部分：总则
| Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: General
|
| prEN 2266-007-2000
| 航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第007部分：UV激光可打印的多芯套内电缆 产品
| Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 007: UV laser printable multicore jacketed cable - Product standard
|
| prEN 2267-002-2000
| 航空航天系列 通用电缆 工作温度 55 ℃ 和 260 ℃ 之间 第002部分：总则
| Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 002: General
|
| prEN 2267-007-1999
| 航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第007部分：007 DMA 系列 单芯喷墨打印和多芯
| Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard
|
| prEN 2267-008-1999
| 航空航天系列 通用电缆 工作温度 55 ℃ 和 200 ℃ 之间 第008部分：008 DMA 系列 单芯UV激光打印和多
| Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 008: DM family, single UV laser printable and multicore assembly - Product standard
|
| prEN 2346-002-2001
| 航空航天系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第00部分：00 总则
| Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 002: General
|
| prEN 2346-003-2001
| 航空航天系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第003部分：单芯 DL系列 总则
| Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 003: DL family, single core; Product standard
|
| prEN 2346-004-2001
| 航空航天系列 耐火电缆 工作温度65 ℃ and 260 ℃之间 第004部分：DN 系列 UV单芯激光印刷和多芯组装
| Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 004: DN family, single UV laser printable and multicore assembly; Light weight; Product standard
|
| prEN 2591-609-1999
| 航空航天系列 光电连接元件 试验方法 第609部分：光学元件 电缆附件的效能 电缆循环可绕性
| Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing
|
| prEN 2713-002-2000
| 航空航天系列 一般用途的单芯和多芯电缆 工作温度在－55℃和200℃之间 第002部分：屏蔽和护套 通用
| Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: Screened and jacketed - General
|
| prEN 2713-011-2000
| 航空航天系列 一般用途的单芯和多芯电缆 工作温度在－55℃和260℃之间 第011部分：屏蔽（螺旋）和护套
| Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
|
| prEN 2714-002-2000
| 航空航天系列 一般用途的单芯和多芯电缆 工作温度在－55℃和260℃之间 第002部分：屏蔽和护套 通用
| Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 002: Screened and jacketed - General
|
| prEN 2714-011-1999
| 航空航天系列 一般用途的单芯和多芯电缆 工作温度在－55℃和260℃之间 第011部分：屏蔽（螺旋）和护套
| Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product standard
|
| prEN 2714-012-1999
| 航空航天系列 一般用途的单芯和多芯电缆 工作温度在－55℃和260℃之间 第0012部分：屏蔽（编织的）和护
| Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product standard
|
| prEN 2853-1998
| 航空航天系列 带EN2083导体的电缆的电流额定值
| Aerospace series - Current ratings for electrical cables with conductor EN 2083
|
| prEN 3475-203-1999
| 航空航天系列 飞行器用的电缆 试验方法 第203部分：尺寸
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
|
| prEN 3475-306-2001
| 航空航天系列 飞行器用的电缆 试验方法 第306部分：导体连续性
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 306: Continuity of conductors
|
| prEN 3475-411-1999
| 航空航天系列 飞行器用的电缆 试验方法 第411部分：液体阻力
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
|
| prEN 3475-414-1999
| 航空航天系列 飞行器用的电缆 试验方法 第414部分：差式扫描热量计（ＤＳＣ测试）
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
|
| prEN 3475-415-2002
| 航空航天系列 飞行器用的电缆 试验方法 第415部分：温度的迅速变化
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 415: Rapid change of temperature
|
| prEN 3475-416-2002
| 航空航天系列 飞行器用的电缆 试验方法 第416部分：热老化
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 416: Thermal ageing
|
| prEN 3475-513-2001
| 航空航天系列 飞行器用的电缆 试验方法 第513部分：变形阻力（与塑料电缆捆接时）
| Aerospace series - Cables, electrical, aircraft use; Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)
|
| prEN 3475-601-2001
| 航空航天系列 飞行器用的电缆 试验方法 第601部分：烟密度
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density
|
| prEN 3475-602-2001
| 航空航天系列 飞行器用的电缆 试验方法 第602部分：毒性
| Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
|
| prEN 3719-1999
| 航空航天系列 电缆用铝和铝合金导体 产品标准
| Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
|
| prEN 4434-1999
| 航空航天系列 用于电缆的铜或铜合金轻质导线 产品标准
| Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard
|
| prEN 45510-2-8-2000
| 电站设备采购指南 第2-8部分：电气设备 动力电缆
| Guide for procurement of power station equipment - Electrical equipment - Part 2-8: Power cables
|
| prEN 45541-1995
| 采购指南 电气设备 电缆网
| Guide for procurement - Electrical equipment - Cabling systems
|
| prEN 45542-1995
| 采购指南 电气设备 LV/MV电缆
| Guide for procurement - Electrical equipment - LV/MV cables
|
| prEN 4604-001-2002
| 航空航天系列 信号传输用电缆 第001部分：技术规范
| Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification
|
| prEN 4604-002-2002
| 航空航天系列 信号传输用电缆 第002部分：总则
| Aerospace series - Cable, electrical, for signal transmission - Part 002: General
|
| prEN 4604-003-2002
| 航空航天系列 信号传输用电缆 第003部分：50 欧姆、200度、WZ型同轴电缆 产品标准
| Aerospace series - Cable, electrical, for signal transmission - Part 003: Coaxial cable 50 Ohm, 200℃, type WZ; Product standard
|
| prEN 4604-004-2002
| 航空航天系列 信号传输用电缆 第004部分：耐扰性、50 欧姆、200度、WS型微型同轴电缆 产品标准
| Aerospace series - Cable, electrical, for signal transmission - Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200℃, type WS; Product standard
|
| prEN 4604-005-2001
| 航空航天系列 信号传输用电缆 第005部分：75 欧姆、200度、WL型同轴电缆 产品标准
| Aerospace series - Cable, electrical, for signal transmission - Part 005: Cable, coaxial, 75 Ohms, 200℃, type WL; Product standard
|
| prEN 4604-006-2002
| 航空航天系列 信号传输用电缆 第006部分：50 欧姆、200度、WM型同轴电缆 产品标准
| Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 Ohms, 200℃, type WM; Product standard
|
| prEN 4604-007-2002
| 航空航天系列 信号传输用电缆 第007部分：50 欧姆、200度、WN型同轴电缆 产品标准
| Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 Ohms, 200℃, type WN; Product standard
|
| prEN 474-12-1998
| 土方机械 安全 第12部分：电缆沟开凿机要求
| Earth-moving machinery - Safety - Part 12: Requirements for cable excavators
|
| prEN 50085-2-1-2002
| 电气装置用电缆槽和电缆管道系统 第2-1部分：安装在墙上或天花板上的电缆槽和电缆管道系统的特殊要求
| Cable trunking and cable ducting systems for electrical installations - Part 2-1: Particular requirements for cable trunking systems and cable ducting systems intended for mounting on walls and/or ceilings
|
| prEN 50090-9-1-2003
| 家用和建筑物电子系统（HBES） 第9-1部分：安装要求 通用的HBES一级双绞线敷设电缆
| Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements; Generic cabling for HBES class 1 twisted pair
|
| prEN 50118-1993
| 家用及类似目的使用的电缆盘（IEC 23B(秘书处)323）
| Cable reels for household and similar purposes (IEC 23B(Secretariat)323)
|
| prEN 50174-3-2003
| 信息技术信息技术 铺设电缆装置 第3部分：：建筑物外部设施安装的规划及实践
| Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings
|
| prEN 50290-1-2-1999
| 通信电缆 第1-2部分：通用的设计原理及结构 定义
| Communication cables - Part 1-2: Definitions
|
| prEN 50290-2-1-2002
| 通信电缆 第2-1部分：通用的设计原理及结构
| Communication cables - Part 2-1: Common design rules and construction / Note: Applies in conjunction with EN 50290-1-1
|
| prEN 50290-3-1999
| 通信电缆 第3部分：质量评定
| Communication cables - Part 3: Quality assessment
|
| prEN 50369-2003
| 电缆的液封外壳系统
| Liquid tight sheathing systems for cable management
|
| prEN 6049-001-2001
| 航空航天系列 设备电缆 偏聚酸胺纤维保护套 第001部分：技术规范
| Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 001: Technical specification
|
| prEN 6049-006-2001
| 航空航天系列 设备电缆 偏聚酸胺纤维保护套 第006部分：自动包装保护套 易弯曲接线端装置 产品标准
| Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation; Product standard
|
| prEN 6059-100-2001
| 航空航天系列 设备电缆 保护套 试验方法 第100部分：总则
| Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 100: General
|
| prEN 6059-303-2001
| 航空航天系列 设备电缆 保护套 试验方法 第303部分：耐流体性
| Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 303: Resistance to fluids
|
| prEN 6059-406-2001
| 航空航天系列 设备电缆 保护套 试验方法 第406部分：振动
| Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 406: Vibration
|
| prEN 60728-6-2003
| 电视信号的电缆网络 声音信号交互服务 第６部分：光学装置
| IEC 60728-6: Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
|
| prEN 60794-4-1-1998
| 光学纤维电缆 第４－１部分：高压输电线架空电缆
| IEC 60794-4-1: Optical fibre cables - Part 4-1: Aerial optical cables for high voltage power lines
|
| prEN 60794-4-2003
| 光学纤维电缆 第４部分：高压输电线架空电缆
| IEC 60794-4, Ed. 2.0: Optical fibre cables - Part 4: Sectional specification; Aerial optical cables along electrical power lines
|
| prEN 61156-1991
| 数字通信用对绞或星绞多芯对称电缆的通用规范
| Draft IEC 61156: generic specification for multicore and symmetrical pair/quad cables for digital communications
|
| prEN 61279-1993
| 分规范 光学电信电缆
| IEC 61279; sectional specification; optical telecommunication cables
|
| prHD 359 S3-1993
| 聚氯乙烯护套扁式软电缆
| Flat polyvinyl chloride sheathed flexible cables
|
| prHD 361 S3-1998
| 电缆设备系统
| System for cable designation
|
| 编号 | 中文名称 | 英文名称 |
|---|