| 编号 | 中文名称 | 英文名称 |
|---|
| IEEE 1073.3.2-2000
| 医疗装置通信.传输层.连接IrDA基电缆
| (Medical device communications - Transport profile - IrDA based cable connected)
|
| IEEE 1073.4.1-2000
| 医疗装置通信.物理层接口.电缆连结
| (Medical device communications - Physical layer interface - Cable connected)
|
| IEEE 1120-1990
| 规划,设计和安装海底电力电缆和通讯电缆时考虑因素指南
| (Guide to the factors to be considered in the planning, design, and installation of submarine power and communications cables)
|
| IEEE 1143-1994
| 低压电缆屏蔽指南
| (Guide on shielding practice for low voltage cables)
|
| IEEE 1185-1994
| 发电站电缆敷设方法指南
| (Guide for installation methods for generating station cables)
|
| IEEE 1202-1991
| 工业区和商业区电缆沟中电缆的火焰试验
| (Flame testing of cables for use in cable tray in industrial and commercial occupancies)
|
| IEEE 1210-1996
| 用金属线和电缆测定电缆拉伸润滑剂的适应性
| (Determining compatibility of cable pulling lubricants with wire and cable)
|
| IEEE 1235-2000
| 地下电力电缆和管道用可识别护套的性能指南
| (Guide for the properties of identifiable jackets for underground power cables and ducts)
|
| IEEE 1242-1999
| 石油和化学工厂的动力,控制,特殊用途电缆的特殊处理和选择指南
| (Guide for specifying and selecting power, control, and special-purpose cable for petroleum and chemical plants)
|
| IEEE 1300-1996
| 气体绝缘变电所电缆连接指南
| (Guide for cable connections for gas-insulated substations)
|
| IEEE 1333-1994
| 用导向打孔安装电缆的导则
| (Guide for installation of cable using the guided boring method)
|
| IEEE 1406-1998
| 电力电缆系统用液体中气体分析的使用指南
| (Guide to the use of gas-in-fluid analysis for electric power cable systems)
|
| IEEE 1407-1998
| 使用充水罐进行中压挤制电力电缆加速老化试验的试验指南
| (Trial-use guide for accelerated aging tests for medium-voltage extruded electric power cables using water-filled tanks)
|
| IEEE 383-1974
| 1E级电缆型式试验;核电站的现场拼接和联接
| (Type test of class 1E electric cables; field splices and connections for nuclear power generating stations)
|
| IEEE 400-2001
| 铠装电力电缆系统绝缘的现场试验和评定指南
| (Guide for field testing and evaluation of the insulation of shielded power cable systems)
|
| IEEE 404-2000
| 额定电压2500V-500000V的挤压和层压介质铠装电缆接头
| (Extruded and laminated dielectric shielded cable joints rated 2500 V to 500000 V)
|
| IEEE 48-1996
| 2.5KV-765KV高压交流电缆终端的试验程序和要求
| (Test procedures and requirements for alternating-current cable terminations 2.5 kV through 765 kV)
|
| IEEE 525-1992
| 变电站电缆系统设计和安装指南
| (Guide for the design and installation of cable systems in substations)
|
| IEEE 532-1993
| 电缆护套的选择和试验指南
| (Guide for selecting and testing jackets for underground cables)
|
| IEEE 576-2000
| 石化工业用绝缘电力电缆的安装、端接和试验推荐规程
| (Recommended practice for installation, termination, and testing of insulated power cable as used in industrial and commercial applications)
|
| IEEE 592-1990
| 高压电缆接头和可分离绝缘连接器的外露半导体护套
| (Exposed semiconducting shields on high-voltage cable joints and separable insulated connectors)
|
| IEEE 628-2001
| 核电站1E级电路的电缆管道系统的设计、安装和鉴定标准
| (Criteria for the design, installation, and qualification of raceway systems for class 1E circuits for nuclear power generating stations)
|
| IEEE 635-1989
| 电力电缆铝护套的选择和设计指南
| (Guide for selection and design of aluminium sheaths for power cables)
|
| IEEE 664-1993
| 单芯电缆风振阻振器电力分散特性实验室测量指南
| (Guide for laboratory measurement of the power dissipation characteristics of aeolian vibration dampers for single conductors)
|
| IEEE 835-1994
| 电力电缆的载流量表
| (Power cable ampacity tables)
|
| IEEE 848-1996
| 防火电缆安载流容量降低额定值测定用工艺程序
| (Procedure for the determination of the ampacity derating of fire-protected cables)
|
| IEEE C 62.22.1-1996
| 绝缘保护铠装电力电缆电涌放电器的连接指南
| (Guide for the connection of surge arresters to protect insulated, shielded electric power cable systems)
|
| 编号 | 中文名称 | 英文名称 |
|---|