| 编号 | 中文名称 | 英文名称 |
|---|
| IEC 60050-461 AMD 1-1993
| 国际电工词汇 第461章:电缆 修改1
| International electrotechnical vocabulary; chapter 461: electric cables; amendment 1
|
| IEC 60050-461 AMD 2-1999
| 国际电工词汇 第461章:电缆 修改2
| International Electrotechnical Vocabulary - Chapter 461: Electric cables; Amendment 2
|
| IEC 60050-461-1984
| 国际电工词汇 第461部分:电缆
| International Electrotechnical Vocabulary. Part 461 : Chapter 461: Electric cables
|
| IEC 60055-1 AMD 1-2005
| 修改件1.额定电压18/30KV及以下的铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆).第1部分:电缆及
| Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
|
| IEC 60055-1 Edition 5.1-2005
| 额定电压18/30kV及以下铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆).第1部分:电缆及其附件的试
| Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
|
| IEC 60055-1-1997
| 额定电压18/30kV及以下铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆) 第1部分:电缆及其附件试验
| Paper-insulated metal-sheathed cabled for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
|
| IEC 60055-2 AMD 1-1989
| 额定电压18/30kV及以下铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆) 第2部分:一般要求和结构要
| Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables); part 2: general and construction requirements; amendment No. 1 to IEC 60055-2:1981
|
| IEC 60055-2 AMD 2-2005
| 修改件2.额定电压18/30KV及以下的铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆).第2部分:一般要
| Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements
|
| IEC 60055-2-1981
| 额定电压18/30kV及以下铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆) 第2部分:一般要求和结构要
| Paper-insulated metal-sheathed cabled for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables); Part 2: General and construction requirements
|
| IEC 60092-350-2001
| 船舶电气设施 第350部分：船用电力电缆 一般结构和试验要求
| Electrical installations in ships - Part 350: Shipboard power cables - General construction and test requirements
|
| IEC 60092-351-2004
| 船舶电气设施.第351部分:船载和海上成套动力装置、远程通讯及控制数据电缆用绝缘材料
| Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables
|
| IEC 60092-352-2005
| 船舶电气设施.第352部分:电缆的选择和敷设
| Electrical installations in ships - Part 352: Choice and installation of electrical cables
|
| IEC 60092-353 AMD 1-2001
| 船舶电气设施 第353部分:额定电压为1kV和3kV的挤压固体绝缘单芯和多芯非径向场电力电缆 修改1
| Electrical installations in ships - Part 353: Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV; Amendment 1
|
| IEC 60092-353-1995
| 船舶电气设施 第353部分:额定电压为1kV和3kV的挤压固体绝缘单芯和多芯非径向场电力电缆
| Electrical installations in ships - Part 353: Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV
|
| IEC 60092-354-2003
| 船舶电气设施.第354部分:额定电压为6至30kV的挤压固体绝缘单芯和三芯电力电缆
| Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
|
| IEC 60092-359 AMD 1 Corrigendum 1-1995
| 船舶电气设施.第359部分:船用电力电缆和通信电缆用护套材料.修改件1
| Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 1
|
| IEC 60092-359 AMD 1-1994
| 船舶电气设施 第359部分:船用电力电缆和通信电缆用护套材料 修改1
| Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 1
|
| IEC 60092-359 AMD 2-1999
| 船舶电气设施 第359部分:船用电力电缆和通信电缆用护套材料 修改2
| Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 2
|
| IEC 60092-359 Edition 1.2-1999
| 船上电气安装.第359部分:船上动力和通信电缆用铠装材料
| Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables
|
| IEC 60092-359-1987
| 船舶电气设施 第359部分:船用电力电缆和通信电缆用护套材料
| Electrical installations in ships. Part 359 : Sheathing materials for shipboard power and telecommunication cables
|
| IEC 60092-373-1977
| 船舶电气设施 第373部分:船用通信电缆和射频电缆 船用同轴电缆
| Electrical installations in ships. Part 373 : Shipboard telecommunication cables and radio-frequency cables. Shipboard coaxial cables
|
| IEC 60092-374-1977
| 船舶电气设施 第374部分:船用通信电缆和射频电缆 非重要通信业务用电缆
| Electrical installations in ships. Part 374 : Shipboard telecommunication cables and radio-frequency cables. Telephone cables for non-essential communication cables
|
| IEC 60092-375-1977
| 船舶电气设施 第375部分:船用通信电缆和射频电缆 一般仪器仪表、控制和通信电缆
| Electrical installations in ships. Part 375 : Shipboard telecommunication cables and readio-frequency cables. General instrumentation, control and communication cables
|
| IEC 60092-376-2003
| 船舶电气设施.第376部分:控制和测量电路150/250V (300 V)用电缆
| Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
|
| IEC 60096-0-1 AMD 1-2000
| 射频电缆 第0部分:详细规范设计指南 第1节:同轴电缆 修改1
| Radio-frequency cables - Part 0: Guide to the design of detailed specifications; Section One: Coaxial cables; Amendment 1
|
| IEC 60096-0-1 Edition 2.1-2000
| 射频电缆.第0部分:详细规范制订导则.第1章:同轴电缆
| Radio frequency cables - Part 0: Guide to the design of detail specifications; Section 1: Coaxial cables
|
| IEC 60096-0-1-1990
| 射频电缆 第0部分:详细规范设计指南 第1节:同轴电缆
| Radio-frequency cables; part 0: guide to the design of detail specifications; section 1: coaxial cables
|
| IEC 60096-1 AMD 2-1993
| 射频电缆 第1部分:一般要求和测量方法 修改2
| Radio-frequency cables; Part 1: general requirements and measuring methods; amendment 2
|
| IEC 60096-1-1986
| 射频电缆 第1部分:一般要求和测量方法
| Radio-frequency cables. Part 1 : General requirements and measuring methods
|
| IEC 60096-2 AMD 1-1990
| 射频电缆 第2部分:相关电缆规范 修改1
| Radio-frequency cables; part 2: relevant cable specifications; amendment No. 1 to IEC 60096-2:1961
|
| IEC 60096-2 Corrigendum 1-1993
| 射频电缆.第2部分:相关电缆规范
| Radio-frequency cables; part 2: relevant cable specifications
|
| IEC 60096-2 Corrigendum 2-1997
| 射频电缆.第2部分:相关电缆规范
| Radio-frequency cables; part 2: relevant cable specifications
|
| IEC 60096-2-1988
| 射频电缆 第2部分:相关电缆规范
| Radio-frequency cables; part 2: relevant cable specifications
|
| IEC 60096-3-1982
| 射频电缆 第3部分:电缆分配系统用单同轴电缆的一般要求和试验
| Radio-frequency cables. Part 3 : General requirements and tests for single-unit coaxial cables for use in cabled distribution systems
|
| IEC 60096-4-1-1990
| 射频电缆 第4部分:超屏蔽电缆规范 第1节:一般要求和试验方法
| Radio-frequency cables; part 4: specification for superscreened cables; section 1: general requirements and test methods
|
| IEC 60141-1 AMD 1-1995
| 充油电缆和压气电缆及其附件的试验 第1部分:交流电压400kV及以下的纸绝缘金属护套充油电缆及其附件 修改1
| Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV; Amendment 1
|
| IEC 60141-1 AMD 2-1998
| 充油电缆和压气电缆及其附件的试验 第1部分:交流电压400kV及以下的纸绝缘金属护套充油电缆及其附件 修改2
| Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV; Amendment 2
|
| IEC 60141-1-1993
| 充油电缆和压气电缆及其附件的试验 第1部分:交流电压400kV及以下的纸绝缘金属护套充油电缆及其附件
| Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV
|
| IEC 60141-2 AMD 1-1967
| 充油电缆和压气电缆及其附件的试验 第2部分:交流电压275kV以下内压气电缆及其附件 修改1
| Test on oil-filled and gas-pressure cables and their accessories. Part 2 : Internal gas-pressure cables and accessories for alternating voltages up to 275 kV
|
| IEC 60141-2-1963
| 充油电缆和压气电缆及其附件的试验 第2部分:交流电压275kV以下内压气电缆及其附件
| Test on oil-filled and gas-pressure cables and their accessories. Part 2 : Internal gas-pressure cables and accessories for alternating voltages up to 275 kV
|
| IEC 60141-3 AMD 1-1967
| 充油电缆和压气电缆及其附件的试验 第3部分:交流电压275kV以下外压气(气体压缩)电缆及其附件 修改1
| Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure (gas compression) cables and accessories alternating voltage up to 275 kV
|
| IEC 60141-3-1963
| 充油电缆和压气电缆及其附件的试验 第3部分:交流电压275kV以下外压气(气体压缩)电缆及其附件
| Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure (gas compression) cables and accessories alternating voltage up to 275 kV
|
| IEC 60141-4 AMD 1-1990
| 充油电缆和压气电缆及其附件的试验 第4部分:交流电压400kV及以下油浸纸绝缘高压力管式充油电缆及其附件 修
| Test on oil-filled and gas-pressure cables and their accessories; part 4: oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV; amendment 1 to IEC 60141-4:1980
|
| IEC 60141-4-1980
| 充油电缆和压气电缆及其附件的试验 第4部分:交流电压400kV及以下油浸纸绝缘高压力管式充油电缆及其附件
| Test on oil-filled and gas-pressure cables and their accessories. Part 4 : Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV
|
| IEC 60169-10 AMD 1-1986
| 射频连接器 第10部分:外导体内径为3mm(0.12 in)的卡锁连接射频同轴电缆连接器 特性阻抗50Ω(SMB型) 修改1
| Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (Type SBM)
|
| IEC 60169-10 AMD 2-1996
| 射频连接器 第10部分:外导体内径为3mm(0.12 in)的卡锁连接射频同轴电缆连接器 特性阻抗50Ω(SMB型) 修改2
| Radio frequency connectors - Part 10: RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (type SMB); Amendment 2
|
| IEC 60169-10-1983
| 射频连接器 第10部分:外导体内径为3mm(0.12 in)的卡锁连接射频同轴电缆连接器 特性阻抗50Ω(SMB型)
| Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (Type SBM)
|
| IEC 60169-22-1985
| 射频连接器 第22部分:与双芯屏蔽对称电缆配用双极卡口锁紧射频连接器(BNO型)
| Radio-frequency connectors. Part 22 : R.F. two-pole bayonet coupled connectors for use with shielded balanced cables having twin inner conductors (Type BNO)
|
| IEC 60169-23-1991
| 射频连接器 第23部分:与3.5mm刚性精密同轴电缆配用外导体内径3.5mm(0.1378 in)的插针插孔式射频连接器
| Radio-frequency connectors, part 23: pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
|
| IEC 60169-24 Corrigendum 1-1995
| 射频连接器.第24部分:典型用于75Ω电缆分配系统、螺纹连接射频同轴连接器(F型)
| Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
|
| IEC 60169-24-1991
| 射频连接器 第24部分:典型用于75Ω电缆分配系统、螺纹连接射频同轴连接器(F型)
| Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
|
| IEC 60169-25-1992
| 射频连接器 第25部分:与双芯屏蔽对称电缆配用、外导体内经为13.56mm(0.534 in)的双极螺纹连接连接器(TWHN型
| Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN)
|
| IEC 60169-27-1994
| 射频连接器 第27部分:典型用于75Ω电缆分配系统的螺纹连接射频同轴连接器(E型)
| Radio-frequency connectors; part 27: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (type E)
|
| IEC 60169-5 Corrigendum 1-1971
| 射频连接器.第5部分:电缆 96 IEC 60050-17及更大电缆用射频同轴连接器
| Radio-frequency connectors. Part 5 : R.F. coaxial connectors for cables 96 IEC 60050-17 and larger
|
| IEC 60169-5-1970
| 射频连接器 第5部分:电缆96 IEC 60050-17及更大电缆用射频同轴连接器
| Radio-frequency connectors. Part 5 : R.F. coaxial connectors for cables 96 IEC 60050-17 and larger
|
| IEC 60169-6-1971
| 射频连接器 第6部分:电缆96 IEC 60075-17及更大电缆用射频同轴连接器
| Radio-frequency connectors. Part 6 : R.F. coaxial connectors for cables 96 IEC 60075-17 and larger
|
| IEC 60173-1964
| 软电缆和软电线线芯的颜色
| Colours of the cores of flexible cables and cords
|
| IEC 60183 AMD 1-1990
| 高压电缆的选择指南 修改1
| Guide to the selection of high-voltage cables; amendment 1 to IEC 60183:1984
|
| IEC 60183-1984
| 高压电缆的选择指南
| Guide to the selection of high-voltage cables
|
| IEC 60189-1 AMD 3-1992
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第1部分:一般试验和测量方法 修改3
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 1: general test and measuring methods; amendment 3
|
| IEC 60189-1-1986
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第1部分:一般试验和测量方法
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 1 : General test and measuring methods
|
| IEC 60189-2 AMD 1-1989
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第2部分:内部装置用双芯、三芯、四芯和五芯电缆 修改1
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 2: cables in pairs, triples, quads and quintuples for inside installations; amendment No. 1 to IEC 60189-2:1981
|
| IEC 60189-2 AMD 2-1996
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第2部分:内部安装用双芯、三芯、四芯和五芯电缆 修改2
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations; Amendment 2
|
| IEC 60189-2-1981
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第2部分:内部安装用双芯、三芯、四芯和五芯电缆
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 2 : Cables in pairs, triples, quads and quintuples for inside installations
|
| IEC 60189-3 AMD 1-1989
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第3部分:聚氯乙烯绝缘的单股、双股、三股实心或绞合线 修改1
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 3: equipment wires with solid or stranded conductor, PVC insulated, in singles, pairs and triples; amendment No. 1 to publication 60189-3:1988
|
| IEC 60189-3-1988
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第3部分:聚氯乙烯绝缘的单股、双股、三股实心或绞合线
| Low-frequency cables and wires with P.V.C. insulation and P.V.C. sheath. Part 3: Equipment wires with solid or stranded conductor, PVC insulated, in singles, pairs and triples
|
| IEC 60189-4 AMD 1-1989
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第4部分:配电用聚氯乙烯绝缘的实心导体双芯、三芯、四芯和五
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 4: distribution wires with solid conductors, PVC insulated, in pairs, triples, quads and quintuples; amendment No. 1 to publication 60189-4:1980
|
| IEC 60189-4-1980
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第4部分:配电用聚氯乙烯绝缘的实心导体双芯、三芯、四芯和五
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 4 : Distribution wires with solid conductors, p.v.c. insulated, in pairs, triples, quads and quintuples
|
| IEC 60189-5 AMD 2-1992
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第5部分:聚氯乙烯绝缘的实心或绞合导体单芯或双芯设备用电线
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 5: equipment wires and cables with solid or stranded conductors, PVC insulated, screened, single or one pair; amendment 2
|
| IEC 60189-5-1980
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第5部分:聚氯乙烯绝缘的实心或绞合导体单芯或双芯设备用电线
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 5 : Equipment wires and cables with solid or stranded conductors, p.v.c. insulated, screened, single or one pair
|
| IEC 60189-6 AMD 1-1989
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第6部分:电信设备和设施用单芯信号电缆 修改1
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 6: signalling cables in singles for telecommunication equipment and installation; amendment 1 to IEC 60189-6:1982
|
| IEC 60189-6-1982
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第6部分:电信设备和设施用单芯信号电缆
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 6 : Signalling cables in singles for telecommunication equipment and installation
|
| IEC 60189-7 AMD 1-1989
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第7部分:聚氯乙烯绝缘、聚酰胺涂覆的实心导体单芯、双芯、三
| Low-frequency cables and wires with PVC insulation and PVC sheath; part 7: distribution wires with solid conductors, PVC insulated, polyamide coated, in singles, pairs, triples, quads and quintuples; amendment No. 1 to publication 60189-7:1982
|
| IEC 60189-7-1982
| 聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线 第7部分:聚氯乙烯绝缘、聚酰胺涂覆的实心导体单芯、双芯、三
| Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 7 : Distribution wires with solid conductors, p.v.c. insulated, polyamide coated, in singles, pairs, triples, quads or quintuples
|
| IEC 60227-1 AMD 1-1995
| 额定电压450/750V及以下聚氯乙烯绝缘电缆 第1部分:一般要求 修改1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements; Amendment 1
|
| IEC 60227-1 AMD 2-1998
| 额定电压450/750V及以下聚氯乙烯绝缘电缆 第1部分:一般要求 修改2
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements; Amendment 2
|
| IEC 60227-1 Edition 2.2-1998
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆.第1部分:一般要求
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
|
| IEC 60227-1-1993
| 额定电压450/750V及以下聚氯乙烯绝缘电缆 第1部分:一般要求
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 1: general requirements
|
| IEC 60227-2 AMD 1-2003
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆.第2部分:试验方法.修改件1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 1
|
| IEC 60227-2 Corrigendum 1-1998
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆.第2部分:试验方法
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
|
| IEC 60227-2 Edition 2.1-2003
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆.第2部分:试验方法
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
|
| IEC 60227-2-1997
| 额定电压450/750V及以下聚氯乙烯绝缘电缆 第2部分:试验方法
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
|
| IEC 60227-3 AMD 1-1997
| 额定电压450/750V及以下聚氯乙烯绝缘电缆 第3部分:固定布线用的无护套电缆 修改1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring; Amendment 1
|
| IEC 60227-3 Edition 2.1-1997
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆.第3部分:固定布线用无护套电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
|
| IEC 60227-4 AMD 1-1997
| 额定电压450/750V及以下聚氯乙烯绝缘电缆 第4部分:固定布线用的护套电缆 修改1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring; Amendment 1
|
| IEC 60227-4 Edition 2.1-1997
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆.第4部分:固定布线用护套电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
|
| IEC 60227-4-1992
| 额定电压450/750V及以下聚氯乙烯绝缘电缆 第4部分:固定布线用的护套电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 4: sheathed cables for fixed wiring
|
| IEC 60227-5 AMD 1-1997
| 额定电压450/750V及以下聚氯乙烯绝缘电缆 第5部分:软电缆(软线) 修改1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords); Amendment 1
|
| IEC 60227-5 AMD 2-2003
| 额定电压为450/750V及以下的聚氯乙烯绝缘电缆.第5部分:软电缆(软线).修改件2
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords); Amendment 2
|
| IEC 60227-5 Edition 2.1-1998
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆.第5部分:软电缆(软线)
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
|
| IEC 60227-5 Edition 2.2-2003
| 额定电压450/750V及以下聚氯乙烯绝缘电缆.第5部分:软电缆(软线)
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
|
| IEC 60227-5-1997
| 额定电压450/750V及以下聚氯乙烯绝缘电缆 第5部分:软电缆(软线)
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
|
| IEC 60227-6-2001
| 额定电压450/750V及以下聚氯乙烯绝缘电缆和软连接用电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
|
| IEC 60227-7 AMD 1-2003
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆.第7部分:2芯或多芯屏蔽和非屏蔽软电缆.修改件1
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors; Amendment 1
|
| IEC 60227-7 Edition 1.1-2003
| 额定电压450/750V及以下的聚氯乙烯绝缘电缆.第7部分:屏蔽及未屏蔽的两芯或多芯挠性电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
|
| IEC 60227-7-1995
| 额定电压450/750V及以下聚氯乙烯绝缘电缆 第7部分:2芯或多芯屏蔽和非屏蔽软电缆
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
|
| IEC 60228-2004
| 绝缘电缆的导线
| Conductors of insulated cables
|
| IEC 60229-1982
| 具有特殊保护作用的、用挤压成型的电缆外护套的试验
| Tests on cable oversheaths which have a special protective function and are applied by extrusion
|
| IEC 60230-1966
| 电缆及其附件的冲击电压试验
| Impulse tests on cables and their accessories
|
| IEC 60245-1-2003
| 橡皮绝缘电缆.额定电压450/750V及以下.第1部分:一般要求
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
|
| IEC 60245-2 AMD 1-1997
| 橡皮绝缘电缆 额定电压450/750V及以下 第2部分:试验方法 修改1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 1
|
| IEC 60245-2 AMD 2-1997
| 橡皮绝缘电缆 额定电压450/750V及以下 第2部分:试验方法 修改2
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 2
|
| IEC 60245-2 Edition 2.2-1998
| 额定电压450/750V及以下的橡皮绝缘电缆.第2部分:试验方法
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
|
| IEC 60245-2-1994
| 橡皮绝缘电缆 额定电压450/750V及以下 第2部分:试验方法
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
|
| IEC 60245-3 AMD 1-1997
| 橡皮绝缘电缆 额定电压450/750V及以下 第3部分:耐热硅绝缘电缆 修改1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables; Amendment 1
|
| IEC 60245-3-1994
| 橡皮绝缘电缆 额定电压450/750V及以下 第3部分:耐热硅绝缘电缆
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
|
| IEC 60245-4 AMD 1-1997
| 橡皮绝缘电缆 额定电压450/750V及以下 第4部分:软线和软电缆 修改1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables; Amendment 1
|
| IEC 60245-4 AMD 2-2003
| 橡皮绝缘电缆.额定电压450/750V及以下.第4部分:软线和软电缆.修改件2
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables; Amendment 2
|
| IEC 60245-4 Edition 2.2-2004
| 橡皮绝缘电缆.额定电压450/750V及以下.第4部分:软线和软电缆
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
|
| IEC 60245-4-1994
| 橡皮绝缘电缆 额定电压450/750V及以下 第4部分:软线和软电缆
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
|
| IEC 60245-5 AMD 1-2003
| 橡皮绝缘电缆.额定电压450/750V及以下.第5部分:电梯电缆.修改件1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables; Amendment 1
|
| IEC 60245-5-1994
| 橡皮绝缘电缆 额定电压450/750V及以下 第5部分:电梯电缆
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
|
| IEC 60245-6 AMD 1-1997
| 橡皮绝缘电缆 额定电压450/750V及以下 第6部分:弧焊电极电缆 修改1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables; Amendment 1
|
| IEC 60245-6 AMD 2-2003
| 橡皮绝缘电缆.额定电压450/750V及以下.第6部分:弧焊电极电缆.修改件2
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables; Amendment 2
|
| IEC 60245-6-1994
| 橡皮绝缘电缆 额定电压450/750V及以下 第6部分:弧焊电极电缆
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
|
| IEC 60245-7 AMD 1-1997
| 橡皮绝缘电缆 额定电压450/750V及以下 第7部分:耐热乙烯-乙酸乙烯酯橡皮绝缘电缆 修改1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables; Amendment 1
|
| IEC 60245-7-1994
| 橡皮绝缘电缆 额定电压450/750V及以下 第7部分:耐热乙烯-乙酸乙烯酯橡皮绝缘电缆
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
|
| IEC 60245-8 AMD 1-2003
| 橡皮绝缘电缆.额定电压450/750V及以下.第8部分:应用于需要高柔性的软线.修改件1
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility; Amendment 1
|
| IEC 60245-8 Edition 1.1-2004
| 橡皮绝缘电缆.额定电压450/750V及以下.第8部分:要求高柔性的设备用软线
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
|
| IEC 60245-8-1998
| 橡皮绝缘电缆 额定电压450/750V及以下 第8部分:应用于需要高柔性时的软线
| Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
|
| IEC 60287-1-1 AMD 1-1995
| 电缆 电流定额的计算 第1部分:电流定额公式(100%负载系数)和损耗计算 第1节:总则 修改1
| Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% load factor) and calculation of losses - Section 1: General; Amendment 1
|
| IEC 60287-1-1 AMD 2-2001
| 电缆 电流定额的计算 第1部分:电流定额公式(100%负载因数)和损耗计算 第1节:总则 修改2
| Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% load factor) and calculation of losses; General; Amendment 2
|
| IEC 60287-1-1 Edition 1.2-2001
| 电缆.额定电流的计算.第1-1部分:额定电流方程(100%负载系数)和电损耗计算.总则
| Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% load factor) and calculation of losses; General
|
| IEC 60287-1-1-1994
| 电缆 电流定额的计算 第1部分:电流定额公式(100%负载因数)和损耗计算 第1节:总则
| Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% load factor) and calculation of losses; section 1: General
|
| IEC 60287-1-2-1993
| 电缆 电流定额的计算 第1部分:电流定额公式(100%负载因数)和损耗计算 第2节:双回路本行敷设护套涡流损耗因
| Electric cables; calculation of the current rating; part 1: current rating equations (100% load factor) and calculation of losses; section 2: sheath eddy current loss factors for two circuits in flat formation
|
| IEC 60287-1-3-2002
| 电缆.额定电流的计算.第1-3部分:额定电流方程式(负荷率100%)和损失率的计算.并联单心电缆间电流共享和循环
| Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses; Current sharing between parallel single-core cables and calculation of circulating current losses
|
| IEC 60287-2-1 AMD 1-2001
| 电缆 电流定额的计算 第2部分:热阻 第1节:热阻计算 修改1
| Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance; Calculation of thermal resistance; Amendment 1
|
| IEC 60287-2-1 AMD 2-2006
| 电缆.电流额定值的计算.第2-1部分:热阻.热阻的计算.修改件2
| Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance; Amendment 2
|
| IEC 60287-2-1 Edition 1.2-2006
| 电缆.额定电流的计算.第2-1部分:热阻.热阻计算
| Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
|
| IEC 60287-2-1-1994
| 电缆 电流定额的计算 第2部分:热阻 第1节:热阻计算
| Electric cables - Calculation of the current rating - Part 2: Thermal resistance; section 1: Calculation of thermal resistance
|
| IEC 60287-2-2-1995
| 电缆 电流定额的计算 第2部分:热阻 第2节:在室外敷防受阳光照射的电缆群的缩减因数的计算方法
| Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
|
| IEC 60287-3-1 AMD 1-1999
| 电缆 电流定额的计算 第3部分:运行条件的章节 第1节:基准运行条件和电缆类型的选择 修改1
| Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type; Amendment 1
|
| IEC 60287-3-1 Edition 1.1-1999
| 电缆.电流额定的计算.第3部分:操作条件的选择.参考操作条件和电缆类型的选择
| Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type
|
| IEC 60287-3-1-1995
| 电缆 电流定额的计算 第3部分:运行条件的章节 第1节:基准运行条件和电缆类型的选择
| Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 1: Reference operating conditions and selection of cable type
|
| IEC 60287-3-2 AMD 1-1996
| 电缆 电流定额的计算 第3部分:运行条件的章节 第2节:电力电缆尺寸最佳经济选择 修改1
| Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 2: Economic optimization of power cable size; Amendment 1
|
| IEC 60287-3-2-1995
| 电缆 电流定额的计算 第3部分:运行条件的章节 第2节:电力电缆尺寸最佳经济选择
| Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 2: Economic optimization of power cable size
|
| IEC 60304-1982
| 低频电缆和电线用绝缘的标准颜色
| Standard colours for insulation for low-frequency cables and wires
|
| IEC 60331-11-1999
| 着火条件下电缆的试验.电路完整性.第11部分:仪器.火焰温度至少750℃条件下的单独燃烧
| Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
|
| IEC 60331-12-2002
| 着火条件下电缆的试验.电路完整性.第12部分:仪器.至少在830鳦条件下冲击燃烧
| Tests for electric cables under fire conditions - Circuit integrity - Part 12: Apparatus; Fire with shock at a temperature of at least 830 °C
|
| IEC 60331-21-1999
| 着火条件下电缆的试验 电路完整性 第21部分:程序和要求 额定电压0.6/1.0kV及以下的电缆
| Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
|
| IEC 60331-23-1999
| 着火条件下电缆的试验 电路完整性 第23部分:程序和要求 电数据电缆
| Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables
|
| IEC 60331-25-1999
| 着火条件下电缆的试验 电路完整性 第25部分:程序和要求 光缆
| Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables
|
| IEC 60331-31-2002
| 着火条件下电缆的试验.电路完整性.第31部分:冲击着火的程序和要求.额定电压高达(和包括)0,6/1,0 KV的电缆
| Tests for electric cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock; Cables of rated voltage up to and including 0,6/1,0 kV
|
| IEC 60332-1-1-2004
| 着火条件下电缆和光缆的试验.第1-1部分:单根绝缘电线或电缆垂直火焰蔓延的试验.装置
| Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
|
| IEC 60332-1-2-2004
| 着火条件下电缆和光缆的试验.第1-2部分:单根绝缘电线或电缆垂直火焰蔓延的试验.1kW预混合火焰规程
| Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
|
| IEC 60332-1-3-2004
| 着火条件下电缆和光缆的试验.第1-3部分:单根绝缘电线或电缆垂直火焰蔓延的试验.火焰熔滴/颗粒测定规程
| Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
|
| IEC 60332-2-1-2004
| 着火条件下电缆和光缆的试验.第2-1部分:单根小型绝缘电线或电缆的垂直火焰蔓延试验.装置
| Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
|
| IEC 60332-2-2-2004
| 着火条件下电缆和光缆的试验.第2-2部分:单根小型绝缘电线或电缆的垂直火焰蔓延试验.扩散火焰规程
| Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
|
| IEC 60332-3-10-2000
| 着火条件下电缆的试验 第3-10部分:垂直安装的成束电线或电缆的垂直火焰蔓延的试验 仪器
| Tests on electric cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunches wires or cables; Apparatus
|
| IEC 60332-3-21-2000
| 着火条件下电缆的试验 第3-21部分:垂直安装的成束电线或电缆的垂直火焰蔓延的试验 种类A F/R
| Tests on electric cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category A F/R
|
| IEC 60332-3-22-2000
| 着火条件下电缆的试验 第3-22部分:垂直安装的成束电线或电缆的垂直火焰蔓延的试验 种类A
| Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category A
|
| IEC 60332-3-23-2000
| 着火条件下电缆的试验 第3-23部分:垂直安装的成束电线或电缆的垂直火焰蔓延的试验 种类B
| Tests on electric cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category B
|
| IEC 60332-3-24-2000
| 着火条件下电缆的试验 第3-24部分:垂直安装的成束电线或电缆的垂直火焰蔓延的试验 种类C
| Tests on electric cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category C
|
| IEC 60332-3-25-2000
| 着火条件下电缆的试验 第3-25部分:垂直安装的成束电线或电缆的垂直火焰蔓延的试验 种类D
| Tests on electric cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category D
|
| IEC 60344 AMD 1-1985
| 低频电缆和电线的无镀层和有镀层铜导体电阻的计算指南 修改1
| Guide to the calculation of resistance of plain and coated copper conductors of low-frequency cables and wires
|
| IEC 60344-1980
| 低频电缆和电线的无镀层和有镀层铜导体电阻的计算指南
| Guide to the calculation of resistance of plain and coated copper conductors of low-frequency cables and wires
|
| IEC 60371-3-8 Corrigendum 1-1995
| 以云母为基材的绝缘材料.第3部分:单项材料规范.活页8:阻燃安全电缆用云母纸带
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
|
| IEC 60371-3-8-1995
| 以云母为基材的绝缘材料 第3部分:单项材料规范 活页8:阻燃安全电缆用云母纸带
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
|
| IEC 60439-5 Edition 1.1-1998
| 低压开关设备和控制设备组件.第5部分:公共场所室外安装的组件的特殊要求.网络电力配电用电缆分配箱
| Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks
|
| IEC 60465-1988
| 充油电缆用的未使用过的绝缘矿物油规范
| Specification for unused insulating mineral oils for cables with oil ducts
|
| IEC 60502-1-2004
| 额定电压1～30kV挤压绝缘电力电缆及其附件.第1部分:额定电压1kV(Um=1.2kV)和3kV(Um=3.6kV)的电缆
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (U<(Index)m> = 1,2 kV) and 3 kV (U<(Index)m> = 3,6 kV)
|
| IEC 60502-2-2005
| 额定电压从1kV(Um=1.2kV)到30kV(Um=36kV)的挤压绝缘电力电缆及其附件.第2部分:额定电压从6kV(Um=7.2kV)到30
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 2: Cables for rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
|
| IEC 60502-4-2005
| 额定电压从1kV(Um=1.2kV)到30kV(Um=36kV)的挤压绝缘电力电缆及其附件.第4部分:额定电压从6kV(Um=7.2kV)到30
| Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
|
| IEC 60526-1978
| 医用X射线设备高压电缆插头插座的连接
| High-voltage cable plug and socket connections for medical X-ray equipment
|
| IEC 60584-3-1989
| 热电偶 第3部分:延长电缆和补偿电缆 允差和识别系统
| Thermocouples; part 3: extension and compensating cables; tolerances and identification system
|
| IEC 60603-9-1990
| 印制板用频率低于3MHz的连接器 第9部分:基本网格为2.54 mm (0.1 in)的印制板、底板和电缆连接器用两件式连
| Connectors for frequencies below 3 MHz for use with printed boards; part 9: two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
|
| IEC 60702-1-2002
| 额定电压不超过750V的矿物绝缘电缆及其终端.第1部分:电缆
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
|
| IEC 60702-2-2002
| 额定电压不超过750V的矿物绝缘电缆及其终端.第2部分:终端
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
|
| IEC 60708-2005
| 聚烯烃绝缘和隔潮层聚烯烃护套低频电缆
| Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
|
| IEC 60719-1992
| 额定电压450/750V及以下圆形铜导线电缆的平均外形尺寸上、下限值的计算
| Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
|
| IEC 60724-2000
| 额定电压为1kV(Um=1.2kV)和3kV(Um=3.6kV)的电缆的短路温度极限
| Short-circuit temperature limits of electric cables with a rated voltage of 1 kV (U<(Index)m> = 1,2 kV) and 3 kV (U<(Index)m> = 3,6 kV)
|
| IEC 60728-1-2001
| 电视和声音信号电缆分配系统 第1部分：测量方法和系统性能
| Cabled distribution systems for television and sound signals - Part 1: Methods of measurement and system performance
|
| IEC 60728-10-2005
| 电视信号、声音信号和交互服务用电缆网络.第10部分:回波路径的系统性能
| Cable networks for television signals, sound signals and interactive services - Part 10: System performance of return path
|
| IEC 60728-11-2005
| 电视信号、声音信号和交互式服务用电缆网络.第11部分:安全
| Cable networks for television signals, sound signals and interactive services - Part 11: Safety
|
| IEC 60728-12-2001
| 电视和声音信号用电缆分配系统 第12部分：系统的电磁兼容性
| Cabled distribution systems for television and sound signals - Part 12: Electromagnetic compatibility of systems
|
| IEC 60728-2-2002
| 电视和声音信号用电缆分配系统.第2部分:设备的电磁兼容性
| Cabled distribution systems for television and sound signals - Part 2: Electromagnetic compatibility for equipment
|
| IEC 60728-3-2005
| 电视信号、声音信号和交互设备用电缆网络.第3部分:同轴电缆网络用有源宽带设备
| Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable network
|
| IEC 60728-4-2000
| 电视和声音信号用电缆分配系统 第4部分:无源同轴宽带分配设备
| Cabled distribution systems for television and sound signals - Part 4: Passive coaxial wideband distribution equipment
|
| IEC 60728-5-2001
| 电视和声音信号用电缆分配系统 第5部分：前端设备
| Cabled distribution systems for television and sound signals - Part 5: Headend equipment
|
| IEC 60728-6-2003
| 电视和声音信号及交互服务用电缆网络.第6部分:光学设备
| Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
|
| IEC 60728-7-1-2003
| 电视信号、声音信号和交互信号设备用电缆网络.第7-1部分:混合光纤同轴电缆外部线缆状况监测.物理层规范
| Cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring; Physical (PHY) layer specification
|
| IEC 60728-7-2-2003
| 电视信号、声音信号和交互信号设备用电缆网络.第7-2部分:混合光纤同轴电缆外部线缆状况监测.媒体访问控制层
| Cable networks for television signals, sound signals and interactive services - Part 7-2: Hybrid Fibre Coax Outside Plant Status Monitoring; Media access control (MAC) layer specification
|
| IEC 60728-7-3-2003
| 电视信号、声音信号和交互信号设备用电缆网络.第7-3部分:混合光纤同轴电缆外部线缆状况监测.电力转发器接口
| Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid Fibre Coax Outside Plant Status Monitoring; Power supply to transponder interface bus (PSTIB) specification
|
| IEC 60728-9 AMD 1-2005
| 电视和声音信号用电缆分配系统.第9部分:数字调制信号用电缆分配系统的接口.修改件1
| Cabled distribution systems for television and sound signals - Part 9: Interfaces of cabled distribution systems for digitally modulated signals; Amendment 1
|
| IEC 60728-9-2000
| 电视和声音信号用电缆分配系统 第9部分:数字调制信号用电缆分配系统的接口
| Cabled distribution systems for television and sound signals - Part 9: Interfaces of cabled distribution systems for digitally modulated signals
|
| IEC 60754-1-1994
| 电缆燃烧时释出的气体的试验 第1部分:氢卤酸气体量的测定
| Test on gases evolved during combustion of materials from cables; part 1: determination of the amount of halogen acid gas
|
| IEC 60754-2 AMD 1-1997
| 电缆燃烧时释出的气体的试验 第2部分:通过测量pH值和电导率来测定在取自电缆的材料燃烧时释出的气体的酸度
| Test on gases evolved during combustion of electric cables - Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity; Amendment 1
|
| IEC 60754-2-1991
| 电缆燃烧时释出的气体的试验 第2部分:通过测量pH值和电导率来测定在取自电缆的材料燃烧时释出的气体的酸度
| Test on gases evolved during combustion of electric cables; part 2: determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
|
| IEC 60794-1-2-2003
| 光学纤维电缆.第1-2部分:总规范.基础光缆试验规程
| Optical fibre cables - Part 1-2: Generic specification; Basic optical cable test procedures
|
| IEC 60794-2-10-2003
| 光纤电缆.第2-10部分:室内光缆.单股光缆和双股光缆的类规范
| Optical fibre cables - Part 2-10: Indoor optical fibre cables; Family specification for simplex and duplex cables
|
| IEC 60794-2-11-2005
| 光缆.第2-11部分:室内电缆.房屋布线用单工和双工光缆的详细规范
| Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling
|
| IEC 60794-2-20-2003
| 光纤电缆.第2-20部分:室内光缆.多纤配电光缆的类规范
| Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables
|
| IEC 60794-2-21-2005
| 光缆.第2-21部分:室内电缆.房屋布线用多纤配电光缆的详细规范
| Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
|
| IEC 60794-2-30-2003
| 光纤电缆.第2-30部分:室内光缆.光纤带状电缆类规范
| Optical fibre cables - Part 2-30: Indoor optical fibrea cables; Family specification for optical fibre ribbon cables
|
| IEC 60794-2-31-2005
| 光缆.第2-31部分:室内电缆.房屋布线用带状光缆的详细规范
| Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
|
| IEC 60794-2-40 Corrigendum 1-2005
| 勘误1.光缆.第2-40部分:室内光缆.含A4缓冲层包覆光纤的单工和双工电缆的类规范
| Corrigendum 1 - Optical fibre cables - Part 2-40: Indoor cables - Family specification for simplex and duplex cables with buffered A4 fibres
|
| IEC 60794-3-10-2002
| 光学纤维电缆.第3-10部分:户外电缆.管道光缆和直埋通信光缆的系列规范
| Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables
|
| IEC 60794-3-12-2005
| 光缆.第3-12部分:室外电缆.房屋布线用管道和直埋通信光缆的详细规范
| Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
|
| IEC 60794-3-20-2002
| 光缆.第3-20部分:户外电缆.自立式架空光通信电缆的系列规范
| Optical fibre cables - Part 3-20: Outdoor cables; Family specification for optical self-supporting aerial telecommunication cables
|
| IEC 60794-3-2001
| 光缆 第3部分：分规范 户外电缆
| Optical fibre cables - Part 3: Sectional specification; Outdoor cables
|
| IEC 60794-3-21-2005
| 光缆.第3-21部分:室外电缆.房屋布线用自立式架空通信光缆的详细规范
| Optical fibre cables - Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling
|
| IEC 60800-1992
| 额定电压300/500V舒适加热和防结冰用加热电缆
| Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
|
| IEC 60803 AMD 1-1995
| 射频电缆和连接器用六边形和方形压接模型腔、压锥、标准规、外导体压接套和中心接触压接圆筒的推荐尺寸 修
| Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors; Amendment 1
|
| IEC 60803-1984
| 射频电缆和连接器用六边形和方形压接模型腔、压锥、标准规、外导体压接套和中心接触压接圆筒的推荐尺寸
| Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors
|
| IEC 60807-8-1992
| 频率低于3MHz的矩形连接器 第8部分:具有4个信号接触件和电缆屏蔽用接地接触件的连接器详细规范
| Rectangular connectors for frequencies below 3 MHz; part 8: detail specification for connectors, four-signal contacts and earthing contacts for cable screen
|
| IEC 60811-1-1 AMD 1-2001
| 电缆绝缘和护套材料的通用试验方法 第1部分:一般使用的方法 第1节:厚度和外形尺寸的测量 机械性能测定试验
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-1: Methods for general application; Measurement of thickness and overall dimensions; Tests for determining the mechanical properties; Amendment 1
|
| IEC 60811-1-1 Edition 2.1-2001
| 电缆和光缆的绝缘和护套材料通用试验方法.第1-1部分:一般应用方法.厚度和总尺寸的测量.机械性能测定试验
| Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application; Measurement of thickness and overall dimensions; Tests for determining the mechanical properties
|
| IEC 60811-1-1-1993
| 电缆绝缘和护套材料的通用试验方法 第1部分:一般使用的方法 第1节:厚度和外形尺寸的测量 机械性能测定试验
| Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section 1: measurement of thickness and overall dimensions; tests for determining the mechanical properties
|
| IEC 60811-1-2 AMD 1-1989
| 电缆绝缘和护套材料的通用试验方法 第1部分:一般使用的方法 第2节:热老化方法 修改1
| Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods; amendment No. 1 to IEC 60811-1-2:1985
|
| IEC 60811-1-2 AMD 2-2000
| 电缆和光缆用绝缘和护套材料的通用试验方法 第1部分:一般使用的方法 第2节:热老化方法 修改2
| Common tests methods for insulating and sheathing materials of electric and optical cables - Part 1-2: Methods for general application; Thermal ageing methods; Amendment 2
|
| IEC 60811-1-2 Corrigendum 1-1986
| 电缆用绝缘和护套材料的通用试验方法.第1部分:一般使用的方法.第2节:热老化方法.勘误1
| Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 2: Thermal ageing methods; Corrigendum 1
|
| IEC 60811-1-2-1985
| 电缆绝缘和护套材料的通用试验方法 第1部分:一般使用的方法 第2节:热老化方法
| Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods
|
| IEC 60811-1-3 AMD 1-2001
| 电缆用绝缘和护套材料 通用试验方法 第1部分:一般使用的方法 第3节:密度测定方法 吸水试验 收缩试验
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application - Methods for determining the density; Water absorption tests; Shrinkage test; Amendment 1
|
| IEC 60811-1-3 Edition 2.1-2001
| 电缆和光缆的绝缘和护套材料通用试验方法.第1-3部分:一般应用.密度测定方法.吸水试验.收缩试验
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application; Methods for determining the density; Water absorption tests; Shrinkage test
|
| IEC 60811-1-3-1993
| 电缆绝缘和护套材料通用试验方法.第1部分:一般应用方法.第3节:密度测定方法.吸水试验.收缩试验
| Insulating and sheathing materials of electric cables; common test methods; part 1: general application; section 3: methods for determining the density; water absorption tests; shrinkage test
|
| IEC 60811-1-4 AMD 1-1993
| 电缆绝缘和护套材料的通用试验方法 第1部分:一般使用的方法 第4节:低温试验 修改1
| Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section 4: test at low temperature; amendment 1
|
| IEC 60811-1-4 AMD 2-2001
| 电缆绝缘和护套材料的通用试验方法 第1部分:一般使用的方法 第4节:低温试验 修改2
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-4: Methods for general application; Test at low temperature; Amendment 2
|
| IEC 60811-1-4 Corrigendum 1-1986
| 电缆绝缘和护套材料的通用试验方法.第1部分:一般使用的方法.第4节:低温试验.勘误1
| Common test methods for insulating and sheathing materials of electric cables - Part 1 : Methods for general application - Section 4: Tests at low temperature; Corrigendum 1
|
| IEC 60811-1-4-1985
| 电缆绝缘和护套材料的通用试验方法 第1部分:一般使用的方法 第4节:低温试验
| Common test methods for insulating and sheathing materials of electric cables. Part 1 : Methods for general application. Section Four - Tests at low temperature
|
| IEC 60811-2-1 AMD 1-2001
| 电缆和光缆用绝缘和护套材料 通用试验方法 第2-1部分:弹性化合物专用方法 耐臭氧试验、热凝固试验和矿物
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds; Ozone resistance, hot set and mineral oil immersion tests; Amendment 1
|
| IEC 60811-2-1 Edition 2.1-2001
| 电缆和光缆用绝缘和屏蔽材料的共同试验方法.第2-1部分:弹性体所用特定方法.臭氧抗性、热固和矿物油浸试验
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds; Ozone resistance, hot set and mineral oil immersion tests
|
| IEC 60811-2-1-1998
| 电缆和光缆用绝缘和护套材料 通用试验方法 第2-1部分:弹性化合物专用方法 耐臭氧试验、热凝固试验和矿物油
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests
|
| IEC 60811-3-1 AMD 1-1994
| 电缆绝缘和护套材料的通用试验方法 第3部分:聚氯乙稀(PVC)化合物专用方法 第1节:高温下压力试验 耐裂试验
| Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking; Amendment 1
|
| IEC 60811-3-1 AMD 2-2001
| 电缆绝缘和护套材料的通用试验方法 第3部分:聚氯乙烯(PVC)化合物专用方法 第1节:高温下压力试验 耐裂试
| Common test methods for insulating and sheathing materials of electric and optical cables - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature; Tests for resistance to cracking; Amendment 2
|
| IEC 60811-3-1 Corrigendum 1-1986
| 电缆绝缘和护套材料的通用试验方法.第3部分:聚氯乙烯(PVC)化合物专用方法.第1节:高温下压力试验.耐裂试验.
| Common test methods for insulating and sheathing materials of electric cables - Part 3 : Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking; Corrigendum 1
|
| IEC 60811-3-1-1985
| 电缆绝缘和护套材料的通用试验方法 第3部分:聚氯乙烯(PVC)化合物专用方法 第1节:高温下压力试验 耐裂试验
| Common test methods for insulating and sheathing materials of electric cables. Part 3 : Methods specific to PVC compounds. Section One : Pressure test at high temperature - Tests for resistance to cracking
|
| IEC 60811-3-2 AMD 1-1993
| 电缆绝缘和护套材料的通用试验方法 第3部分:聚氯乙烯(PVC)化合物专用方法 第2节:质量损失试验 热稳定性试验
| Common test methods for insulating and sheathing materials of electric cables; part 3: methods specific to PVC compounds; section 2: loss of mass test; thermal stability test; amendment 1
|
| IEC 60811-3-2 AMD 2-2003
| 电缆和光缆用绝缘和护套材料.通用试验方法.第3-2部分:PVC化合物专用方法.质量损失试验.热稳定性试验.修改件
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test; Amendment 2
|
| IEC 60811-3-2 Corrigendum 1-1986
| 电缆绝缘和护套材料的通用试验方法.第3部分:聚氯乙烯(PVC)化合物专用方法.第2节:质量损失试验.热稳定性试验
| Common test methods for insulating and sheathing materials of electric cables - Part 3 : Methods specific to PVC compounds - Section 2: Loss of mass test - Thermal stability test; Corrigendum 1
|
| IEC 60811-3-2-1985
| 电缆绝缘和护套材料的通用试验方法 第3部分:聚氯乙烯(PVC)化合物专用方法 第2节:质量损失试验 热稳定性试验
| Common test methods for insulating and sheathing materials of electric cables. Part 3 : Methods specific to PVC compounds. Section Two : Loss of mass test - Thermal stability test
|
| IEC 60811-4-1-2004
| 电缆和光缆绝缘和护套材料的通用试验方法.第4-1部分:聚乙烯和聚丙烯化合物专用方法.抗环境应力致裂.熔化流
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope
|
| IEC 60811-4-2-2004
| 电缆和光缆的绝缘和护套材料的通用试验方法.第4-2部分:聚乙烯和聚丙烯化合物专用方法.高温处理后抗拉强度和
| Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalysed oxidative degradation
|
| IEC 60811-5-1 AMD 1-2003
| 电缆和光缆用绝缘和护套材料.通用试验方法.第5-1部分:填充复合物的专用方法.滴点.油分离.较低温脆性.总酸值
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C; Amendment 1
|
| IEC 60811-5-1 Edition 1.1-2004
| 电缆和光缆用绝缘和护套材料.通用试验方法.第5-1部分:填充复合物的专用方法.滴点.油分离.较低温脆性.总酸值
| Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C
|
| IEC 60811-5-1-1990
| 电缆绝缘和护套材料的通用试验方法 第5部分:填充复合物的专用方法 第1节:滴点 油分离 较低温脆性 总酸值 无
| Common test methods for insulating and sheathing materials of electric cables; part 5: methods specific to filling compounds; section one: drop point; separation of oil; lower temperature brittleness; total acid number; absence of corrosive components; permittivity at 23 °C; d.c. resistivity at 23 °C and 100 °C
|
| IEC 60840-2004
| 额定电压为30KV(Um=36KV)以上至150KV(Um=170KV)以下的挤压绝缘的电力电缆及其附件.要求和试验方法
| Power cables with extruded insulation and their accessories for rated voltages above 30 kV (U<(Index)m> = 36 kV) up to 150 kV (U<(Index)m> = 170 kV) - Test methods and requirements
|
| IEC 60853-1 AMD 1-1994
| 电缆周期性和事故电流定额的计算 第1部分:18/30(36)kV及以下电缆周期性定额因数 修改1
| Calculation of the cyclic and emergency current rating of cables - Part 1: Cyclic rating factor for cables up to and including 18/30(36) kV; Amendment 1
|
| IEC 60853-1-1985
| 电缆周期性和事故电流定额的计算 第1部分:18/30(36)kV及以下电缆周期性顶额的因数
| Calculation of the cyclic and emergency current rating of cables. Part 1 : Cyclic rating factor for cables up to and including 18/30 (36) kV
|
| IEC 60853-2-1989
| 电缆周期性和事故电流定额的计算 第2部分:18/30(36)kV以上电缆的周期性定额和一切电压电缆的事故定额
| Calculation of the cyclic and emergency current rating of cables; part 2: cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages
|
| IEC 60853-3-2002
| 电缆周期性和事故电流定额的计算.第3部分:在半干燥土壤中全压电缆的周期性定额因数
| Calculation of the cyclic and emergency current rating of cables - Part 3: Cyclic rating factor for cables of all voltages, with partial drying of the soil
|
| IEC 60885-1-1987
| 电缆的电气试验方法 第1部分:电压450/750V及以下电缆、软线和电线的电气试验
| Electrical test methods for electric cables. Part 1 : Electrical tests for cables, cords and wires for voltages up to and including 450/750 V
|
| IEC 60885-2-1987
| 电缆的电气试验方法 第2部分:局部放电试验
| Electrical test methods for electric cables. Part 2 : Partial discharge tests
|
| IEC 60885-3-1988
| 电缆的电气试验方法 第3部分:测量挤压电力电缆段局部放电的试验方法
| Electrical test methods for electric cables; part 3: test methods for partial discharge measurements on lengths of extruded power cable
|
| IEC 60918 AMD 1-1992
| 间距为1 27mm绝缘刺破型端接式的聚氯乙烯绝缘带状电缆 修改1
| PVC insulated ribbon cable with a pitch of 1,27 mm suitable for insulation displacement termination; amendment 1 to IEC 60918:1987
|
| IEC 60918-1987
| 间距为1 27mm绝缘刺破型端接式的聚氯乙烯绝缘带状电缆
| PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement termination.
|
| IEC 60966-1-1999
| 射频同轴电缆组件 第1部分:总规范 一般要求和试验方法
| Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
|
| IEC 60966-2-1-2003
| 射频同轴电缆组件.第2-1部分:柔软同轴电缆组件分规范
| Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies
|
| IEC 60966-2-2-2003
| 射频同轴电缆组件.第2-2部分:柔软同轴电缆组件空白详细规范
| Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies
|
| IEC 60966-2-3-2003
| 射频同轴电缆组件.第2-3部分:柔软同轴电缆组件详细规范
| Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies
|
| IEC 60966-2-4-2003
| 射频和同轴电缆组件.第2-4部分:无线电和电视接收机用0-3000MHz、使用IEC 60169-2连接器的电缆组件的详细规
| Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors
|
| IEC 60966-2-5-2003
| 射频和同轴电缆组件.第2-5部分:无线电和电视接收机用0-3000MHz、使用IEC 61169-2联接器的电缆组件详细规范
| Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors
|
| IEC 60966-2-6-2003
| 射频和同轴电缆组件.第2-6部分:无线电和电视接收机用,0-3000MHZ、使用IEC60169-24连接器的电缆组件详细规范
| Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 61169-24 connectors
|
| IEC 60966-3-1-2003
| 射频同轴电缆组件.第3-1部分:半柔软同轴电缆组件空白详细规范
| Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies
|
| IEC 60966-3-2-2003
| 射频同轴电缆组件.第3-2部分:GSM(0.8GHz-1GHz)用半柔软同轴电缆组件详细规范
| Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
|
| IEC 60966-3-2003
| 射频同轴电缆组件.第3部分:半柔软同轴电缆组件分规范
| Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies
|
| IEC 60966-4-1-2003
| 射频同轴电缆组件.第4-1部分:半硬同轴电缆组件空白详细规范
| Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
|
| IEC 60966-4-2003
| 射频同轴电缆组件.第4部分:半硬性同轴电缆组件分规范
| Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
|
| IEC 60974-12-2005
| 弧焊设备.第12部分:焊接电缆的耦合器
| Arc-welding equipment - Part 12: Coupling devices for welding cables
|
| IEC 60986-2000
| 额定电压6kV(Um=7 2kV)～30kV(Um=36kV)电缆的短路温度限值
| Short-circuit temperature limits of electric cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
|
| IEC 61034-1-2005
| 在规定条件下燃烧的电缆的烟密度的测量.第1部分:试验设备
| Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
|
| IEC 61034-2-2005
| 在规定条件下燃烧的电缆的烟密度的测量.第2部分:试验程序和要求
| Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
|
| IEC 61076-4-108-2002
| 电子设备连接器.第4-108部分:有质量评定的印制板连接器.符合IEC 60917-1的基本网格为2.5mm、有25mm模数间距
| Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
|
| IEC 61076-4-110-2001
| 电子设备用连接器 第4 -110部分：有质量评定的印制板连接器 基本网格为2.0mm，有全屏蔽和闩锁功能的闩锁
| Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
|
| IEC 61076-7-001-2004
| 电子设备连接器.第7-001部分:电缆引出端附件.空白详细规范
| Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification
|
| IEC 61076-7-100-2006
| 电子设备连接器.第7-100部分:电缆电源插座附件.由高负载矩形或圆形连接器罩和密封系统完整部件组成的米制电
| Connectors for electronic equipment - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
|
| IEC 61076-7-2000
| 直流低频模拟及数字高速数据应用系统用连接器 第7部分:具有质量评定的包括鉴定和能力批准的电缆引出端附件
| Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
|
| IEC 61084-1 AMD 1-1993
| 电气装置用电缆槽和管道系统 第1部分:一般要求 修改1
| Cable trunking and ducting systems for electrical installations; part 1: general requirements; amendment 1
|
| IEC 61084-1-1991
| 电气装置用电缆槽和管道系统 第1部分:一般要求
| Cable trunking and ducting systems for electrical installations; part 1: general requirements
|
| IEC 61084-2-1-1996
| 电气装置用电缆槽和管道系统 第2部分:特殊要求 第1节:安装在墙上或天花板上的电缆槽和管道系统
| Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings
|
| IEC 61084-2-2-2003
| 电气装置用电缆槽和管道系统.第2-2部分:特殊要求.安装在地板下和与地板齐平的设施用电缆槽和管道系统
| Cable trunking and ducting systems for electrical installations - Part 2-2: Particular requirements; Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations
|
| IEC 61084-2-4-1996
| 电气装置用电缆槽和管道系统 第2部分:特殊要求 第4节:接线柱
| Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 4: Service poles
|
| IEC 61138 AMD 1-1995
| 便携式接地和短路设备用电缆 修改1
| Cables for portable earthing and short-circuiting equipment; Amendment 1
|
| IEC 61138-1994
| 便携式接地和短路设备用电缆
| Cables for portable earthing and short-circuiting equipment
|
| IEC 61156-1 Corrigendum 1-2005
| 勘误1.数字通信用对绞/星绞多芯和对称电缆.第1部分:总规范
| Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
|
| IEC 61156-1-1-2001
| 数字通信用对绞或星绞多芯对称电缆 第1-1部分：能力批准 总规范
| Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability approval; Generic specification
|
| IEC 61156-1-2002
| 数字通信用对绞或星绞多芯对称电缆.第1部分:总规范
| Multicore and symmetrical pair/quad cables for digital communication - Part 1: Generic specification
|
| IEC 61156-2-1-2003
| 数字通信用对绞或星绞多芯对称电缆.第2-1部分:水平平面布线.空白详细规范
| Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring; Blank detail specification
|
| IEC 61156-2-2-2001
| 数字通信用对绞或星绞多芯对称电缆 第2-2部分：水平层布线电缆 能力批准 分规范
| Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring; Capability approval; Sectional specification
|
| IEC 61156-2-2003
| 数字通信用对绞或星绞多芯对称电缆.第2部分:水平平面布线.分规范
| Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring; Sectional specification
|
| IEC 61156-3-1-2003
| 数字通信用对绞或星绞多芯对称电缆.第3-1部分:工作区布线电缆.空白详细规范
| Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring; Blank detail specification
|
| IEC 61156-3-2-2001
| 数字通信用对绞或星绞多芯对称电缆 第3-2部分：工作区布线电缆 能力批准 分规范
| Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work area wiring; Capability approval; Sectional specification
|
| IEC 61156-3-2003
| 数字通信用对绞或星绞多芯对称电缆.第3部分:工作区布线电缆.分规范
| Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring; Sectional specification
|
| IEC 61156-4-1-2003
| 数字通信用对绞或星绞多芯对称电缆.第4-1部分:垂直布线.空白详细规范.修改件1
| Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables; Blank detail specification
|
| IEC 61156-4-2-2001
| 数字通信用对绞或星绞多芯对称电缆 第4-2部分：垂直布线电缆 能力批准 分规范
| Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables; Capability approval; Sectional specification
|
| IEC 61156-4-2003
| 数字通信用对绞或星绞多芯对称电缆.第4部分:引上电缆.分规范
| Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables; Sectional specification
|
| IEC 61156-5-1-2002
| 数字通信用对绞/星绞多芯和对称电缆.第5-1部分:不高于600MHz的有传输特性的对绞/星绞对称电缆.水平地板布线
| Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Blank detail specification
|
| IEC 61156-5-2-2002
| 数字通信用对绞/星绞多芯和对称电缆.第5-2部分:不高于600MHz的有传输特性的对绞/星绞对称电缆.水平地板布线
| Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Capability approval; Sectional specification
|
| IEC 61156-5-2002
| 数字通信用对绞/星绞多芯和对称电缆.第5部分:不高于600MHz的有传输特性的对绞/星绞对称电缆.水平地板布线.
| Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Sectional specification
|
| IEC 61156-6-1-2002
| 数字通信用对绞/星绞多芯和对称电缆.第6-1部分:不高于600MHz的有传输特性的对绞/星绞对称电缆.工作场所布线
| Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Blank detail specification
|
| IEC 61156-6-2-2002
| 数字通信用对绞/星绞多芯和对称电缆.第6-2部分:不高于600MHz的有传输特性的对绞/星绞对称电缆.工作场所布线
| Multicore and symmetrical pair/quad cables for digital communications - Part 6-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Capability approval; Sectional specification
|
| IEC 61156-6-2002
| 数字通信用对绞/星绞多芯和对称电缆.第6部分:不高于600MHz的有传输特性的对绞/星绞对称电缆.工作场所布线.
| Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Sectional specification
|
| IEC 61156-7-1-2003
| 数字通信用对绞/星绞多芯对称电缆.第7-1部分:1200MHz及以下传输特性的对绞对称电缆.数字和模拟通信电缆的空
| Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Blank detail specification for digital and analog communication cables
|
| IEC 61156-7-2-2003
| 数字通信用对绞/星绞多芯对称电缆.第7-2部分:1200MHz及以下传输特性的对绞对称电缆.质量评定程序.数字和模
| Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Quality assessment procedure; Sectional specification for digital and analog communication cables
|
| IEC 61156-7-2003
| 数字通信用对绞/星绞多芯对称电缆.第7部分:1200MHz及以下传输特性的对绞对称电缆.数字和模拟通信电缆的分规
| Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Sectional specification for digital and analog communication cables
|
| IEC 61169-24-2001
| 射频连接器 第24部分：分规范 螺纹连接射频同轴连接器，典型的用于75Ω电缆分配系统（F型）
| Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
|
| IEC 61196-1-100-2005
| 同轴通信电缆.第1-100部分:电气试验方法.一般要求
| Coaxial communication cables - Part 1-100: Electrical test methods - General requirements
|
| IEC 61196-1-101-2005
| 同轴通信电缆.第1-101部分:电气试验方法.电缆导线的直流电阻试验
| Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor d.c. resistance of cable
|
| IEC 61196-1-102-2005
| 同轴通信电缆.第1-102部分:电气试验方法.电缆介质绝缘电阻试验
| Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
|
| IEC 61196-1-103-2005
| 同轴通信电缆.第1-103部分:电气试验方法.电缆容量试验
| Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable
|
| IEC 61196-1-104-2005
| 同轴通信电缆.第1-105部分:电气试验方法.电缆的电容稳定性试验
| Coaxial communication cables - Part 1-104: Electrical test methods - Test for capacitance stability of cable
|
| IEC 61196-1-105-2005
| 同轴通信电缆.第1-105部分:电气试验方法.电缆电介质的耐电压试验
| Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric
|
| IEC 61196-1-107-2005
| 同轴通信电缆.第1-107部分:电气试验方法.电缆颤噪转换电平试验(机械感应噪声)
| Coaxial communication cables - Part 1-107: Electrical test methods - Test for cable microphony charge level (mechanically induced noise)
|
| IEC 61196-1-108-2005
| 同轴通信电缆.第1-108部分:电气试验方法.特征阻抗、相位、群延迟、电长度和传播速度的测试
| Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
|
| IEC 61196-1-111-2005
| 同轴通信电缆.第1-111部分:电气试验方法.相常数的稳定性试验
| Coaxial communication cables - Part 1-111: Electrical test methods - Test for stability of phase constant
|
| IEC 61196-1-112-2006
| 同轴通信电缆.第1-112部分:电气试验方法.回程损耗试验(阻抗的均匀性)
| Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance)
|
| IEC 61196-1-115-2006
| 同轴通信电缆.第1-115部分:电气试验方法.阻抗的规律性试验(脉冲/步幅功能回程损耗)
| Coaxial communication cables - Part 1-115: Electrical test methods - Test for regularity of impedance (pulse/step function return loss)
|
| IEC 61196-1-122-2006
| 同轴通信电缆.第1-122部分:电气试验方法.同轴电缆之间的串音试验
| Coaxial communication cables - Part 1-122: Electrical test methods - Test for cross-talk between coaxial cables
|
| IEC 61196-1-200-2005
| 同轴通信电缆.第1-200部分:环境试验方法.总规范
| Coaxial communication cables - Part 1-200: Environmental test methods - General requirements
|
| IEC 61196-1-2005
| 同轴通信电缆.第1部分:总规范.总则、定义和要求
| Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements
|
| IEC 61196-1-206-2005
| 同轴通信电缆.第1-206部分:环境试验方法.气候的序列试验
| Coaxial communication cables - Part 1-206: Environmental test methods - Climatic sequence
|
| IEC 61196-1-301-2005
| 同轴通信电缆.第1-301部分:机械试验方法.椭圆度试验
| Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality
|
| IEC 61196-1-302-2005
| 同轴通信电缆.第1-302部分:机械试验方法.偏心率试验
| Coaxial communication cables - Part 1-302: Mechanical test methods - Test for eccentricity
|
| IEC 61196-1-308-2005
| 同轴通信电缆.第1-308部分:机械试验方法.包铜金属抗拉强度和伸长性试验
| Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals
|
| IEC 61196-1-310-2005
| 同轴通信电缆.第1-310部分:机械试验方法.包铜金属扭曲特性试验
| Coaxial communication cables - Part 1-310: Mechanical test methods - Test for torsion characteristics of copper-clad metals
|
| IEC 61196-1-314-2006
| 同轴通信电缆.第1-314部分:机械试验方法.弯曲试验
| Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending
|
| IEC 61196-1-316-2005
| 同轴通信电缆.第1-316部分:机械试验方法.电缆的最大拉力试验
| Coaxial communication cables - Part 1-316: Mechanical test methods - Test for maximum pulling force of cable
|
| IEC 61196-1-317-2006
| 同轴通信电缆.第1-317部分:机械试验方法.电缆的抗压碎试验
| Coaxial communication cables - Part 1-317: Mechanical test methods - Test for crush resistance of cable
|
| IEC 61196-1-324-2006
| 同轴通信电缆.第1-324部分:机械试验方法.电缆的耐磨损试验
| Coaxial communication cables - Part 1-324: Mechanical test methods - Test for abrasion resistance of cable
|
| IEC 61196-2-1995
| 射频电缆 第2部分:聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范
| Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
|
| IEC 61196-3-1-1995
| 射频电缆 第3部分:水平层布线数字通信用同轴电缆 第1节:有效半径达到500m、速率10 Mb/s及以下的电缆详细规
| Radio-frequency cables - Part 3: Coaxial cables for digital communication in horizontal floor wiring - Section 1: Detail specification for cables of 500 m reach and up to 10 Mb/s
|
| IEC 61196-3-1998
| 射频电缆 第3部分:局域网用同轴电缆分规范
| Radio-frequency cables - Part 3: Sectional specification for coaxial cables for local area networks
|
| IEC 61196-3-2-1997
| 射频电缆 第3-2部分:水平层布线数字通信用同轴电缆 有效半径达到185m、速率10Mb/s以下的局域网用实心介质同
| Radio-frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s
|
| IEC 61196-3-3-1997
| 射频电缆 第3-3部分:水平层布线数字通信用同轴电缆 有效半径达到185m、速率10Mb/s以下的局域网用泡沫介质同
| Radio-frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s
|
| IEC 61196-4-2004
| 同轴通信电缆.第4部分:辐射电缆分规范
| Coaxial communication cables - Part 4: Sectional specification for radiating cables
|
| IEC 61238-1-2003
| 额定电压30KV(U<指数m>=36 kV)电力电缆用压接和机械连接器.第1部分:试验方法和要求
| Compression and mechanical connectors for power cables for rated voltages up to 30 kV (U<(Index)m>=36 kV) - Part 1: Test methods and requirements
|
| IEC 61316-1999
| 工业电缆卷筒
| Industrial cable reels
|
| IEC 61386-21-2002
| 电缆管理用导管系统.第21部分:特殊要求:刚性导管系统
| Conduit systems for cable management - Part 21: Particular requirements; Rigid conduit systems
|
| IEC 61386-22-2002
| 电缆管理用导管系统.第22部分:特殊要求:可弯曲的导管系统
| Conduit systems for cable management - Part 22: Particular requirements; Pliable conduit systems
|
| IEC 61386-23-2002
| 电缆管理用导管系统.第23部分:特殊要求:挠性导管系统
| Conduit systems for cable management - Part 23: Particular requirements; Flexible conduit systems
|
| IEC 61386-24-2004
| 电缆管理用导管系统.第24部分:特殊要求.埋于地下的导管系统
| Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground
|
| IEC 61442-2005
| 额定电压6-30kV(Um=7.2-36kV)的电力电缆附件的试验方法
| Test methods for accessories for power cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
|
| IEC 61443-1999
| 额定电压30kV(Um=36kV)以上电缆的短路温度极限值
| Short-circuit temperature limits of electric cables with rated voltages above 30 kV (U<(Index)m> = 36 kV)
|
| IEC 61515-1995
| 矿物绝缘热电偶电缆和热电偶
| Mineral insulated thermocouple cables and thermocouples
|
| IEC 61537-2001
| 电缆管理用电缆沟系统和电缆梯架系统
| Cable tray systems and cable ladder systems for cable management
|
| IEC 61935-1 Edition 1.1-2002
| 通用布线系统.根据ISO/IEC 11801对对称通信布线进行检验的规范.第1部分:电缆敷设
| Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling
|
| IEC 61935-1-2005
| 根据ISO/IEC 11801对对称通信布线进行检验.第1部分:已安装的电缆
| Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling
|
| IEC 61950-1997
| 电缆布置系统 电气装置用超重负载型金属导管配件的规范
| Cable management systems - Specification for conduit fittings for electrical installations for extra-heavy duty metal conduit
|
| IEC 62012-1-2004
| 在杂乱信号环境中使用的数字通信用对绞/星绞多芯和对称电缆.第1部分:总规范
| Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification
|
| IEC 62037-1999
| 射频连接器、连接器电缆组件和电缆 互调电平测量
| RF connectors, connector cable assemblies and cables - Intermodulation level measurement
|
| IEC 62067 Edition 1.1-2006
| 额定电压150千伏以上(Um=170KV)至500千伏(Um=550KV)的挤包绝缘电力电缆及其附件.试验方法和要求
| Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements
|
| IEC 62067-2001
| 额定电压150KV（Um=170KV）以上至500KV（Um=550KV）的挤包绝缘电力电缆及其附件 试验方法和要求
| Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements
|
| IEC 62153-1-1-2003
| 金属通信电缆试验方法.第1-1部分:电气.用离散傅里叶逆变换测量频域中的脉冲/分步回程损失
| Metallic communication cables test methods - Part 1-1: Electrical; Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)
|
| IEC 62153-4-2-2003
| 金属通信电缆试验方法.第4-2部分:电磁兼容性(EMC).屏蔽和耦合衰减.注入夹紧法
| Metallic communication cables test methods - Part 4-2: Electromagnetic compatibility (EMC); Screening and coupling attenuation; Injection clamp method
|
| IEC 62153-4-3-2006
| 金属通信电缆试验方法.第4-3部分:电磁兼容性(EMC).表面传输阻抗.三维法
| Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
|
| IEC 62153-4-4-2006
| IEC 62153-4-4:金属通信电缆试验方法.第4-4部分:电磁兼容性(EMC).测量大于等于3GHz屏蔽衰减的屏蔽筛衰减量
| IEC 62153-4-4: Metallic communication cable test methods - Part 4-4: Electromagnetic Compatibility (EMC) - Shielded screening attenuation, test method for measuring of the screening attenuation a<(Index)s> up to and above 3 GHz
|
| IEC 62153-4-5-2006
| 金属通信电缆试验方法.第4-5部分:电磁兼容性(EMC).耦合或屏蔽衰减.吸收夹紧法
| Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Coupling or screening attenuation - Absorbing clamp method
|
| IEC 62153-4-6-2006
| 金属化通信电缆试验方法.第4-6部分:电磁兼容性(EMC).表面传输阻抗.线性注入法
| Metallic communication cable test methods - Part 4-6: Electro Magnetic Compatibility (EMC) - Surface transfer impedance - Line injection method
|
| IEC 62153-4-7-2006
| 金属通信电缆试验方法.第4-7部分:电磁兼容性(EMC).测量迁移阻抗和屏蔽或耦合衰减的试验方法.管中管法
| Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening - or the coupling attenuation - Tube in tube method
|
| IEC 62230-2006
| 电缆.火花试验方法
| Electric cables - Spark-test method
|
| IEC 62255-2-1-2006
| 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第2-1部分:未填充电缆.空白详
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2-1: Unfilled cables - Blank detail specification
|
| IEC 62255-2-2006
| 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第2部分:未填充电缆.分规范
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled cables - Sectional specification
|
| IEC 62255-3-1-2006
| 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第3部分:填充电缆.空白详细规
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3-1: Filled cables - Blank detail specification
|
| IEC 62255-3-2006
| 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第3部分:填充电缆.分规范
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled cables - Sectional specification
|
| IEC 62255-4-1-2006
| 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第4-1部分:架空引入电缆.空白
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4-1: Aerial drop cables - Blank detail specification
|
| IEC 62255-4-2006
| 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第4部分:架空引入电缆.分规范
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Sectional specification
|
| IEC 62255-5-1-2006
| 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第5-1部分:填充引入电缆.空白
| Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5-1: Filled drop cables - Blank detail specification
|
| IEC 62255-5-2006
| 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第5部分:填充引入电缆.分规范
| Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop cables - Sectional specification
|
| IEC/PAS 60794-2-50-2004
| 光缆.第2-50部分:室内光缆.接插线中使用的单工和双工电缆的系列规范
| Optical fibre cables - Part 2-50: Indoor optical fibre cables - Family specification for simplex and duplex cables for use in patch cords
|
| IEC/PAS 61076-3-109-2001
| 电子设备用连接器 第3-109部分：用于在苛刻工业环境中高速数据应用的电缆至印制版的两斜式连接器的详细规
| Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment; Protection rate IP67 according to IEC 60529
|
| IEC/PAS 62338-2002
| 屏蔽对称电缆.用三线法连接衰减测量
| Screened balanced cables - Coupling attenuation measurement, triaxial method
|
| IEC/TR 60649-1979
| 户内装置用电缆最大外径的计算
| Calculation of maximum external diameter of cables for indoor installations
|
| IEC/TR 61901-2005
| 对额定电压超过30kV(U<(Index)m> = 36 kV)的有纵向用金属箔的电缆的推荐开发试验
| Development tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (U<(Index)m> = 36 kV)
|
| IEC/TR 62064-1999
| 射频电缆 表面传输阻抗和屏蔽衰减关系(IEC 61196-1第14章中推荐极限值的背景文件)
| Radio-frequency cables - Relationship between surface transfer impedance and screening attenuation (A background to the recommended limits contained in IEC 61196-1, clause 14)
|
| IEC/TR 62095-2003
| 电缆.电流额定值的计算.用有限元法测定电缆的电流额定值
| Electric cables - Calculations for the current ratings - Cable current rating using the finite elements method
|
| IEC/TR 62222-2006
| 建筑物内安装的通信电缆的防火性能
| Fire performance of communication cables installed in buildings
|
| IEC/TR2 61423-1-1995
| 工业用加热电缆 第1部分:性能要求和试验方法 2型技术报告
| Heating cables for industrial applications - Part 1: Performance requirements and test methods; Technical Report Type 2
|
| IEC/TR2 61423-2-1995
| 工业用加热电缆 第2部分:结构和材料要求 2型技术报告
| Heating cables for industrial applications - Part 2: Constructional and material requirements; Technical Report Type 2
|
| IEC/TR3 61000-5-2-1997
| 电磁兼容性(EMC) 第5部分:安装和调试指南 第2节:接地和电缆敷设
| Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
|
| IEC/TR3 61917-1998
| 电缆、电缆组件和连接器 电磁(EMC)屏蔽测量介绍
| Cables, cable assemblies and connectors - Introduction to electromagnetic (EMC) screening measurements
|
| IEC/TS 60859 Corrigendum 1-2000
| 额定电压72.5kV及以上气体绝缘金属封闭开关设备的电缆连接.充流体和挤压绝缘电缆.充流体和干型电缆终端
| Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above - Fluid-filled and extruded insulation cables - Fluid-filled and dry type cable-terminations
|
| IEC/TS 60859 Corrigendum 2-2000
| 额定电压72.5kV及以上气体绝缘金属封闭开关设备的电缆连接.充流体和挤压绝缘电缆.充流体和干型电缆终端
| Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above - Fluid-filled and extruded insulation cables - Fluid-filled and dry type cable-terminations
|
| IEC/TS 60859-1999
| 额定电压72.5kV及以上气体绝缘金属封闭开关设备的电缆连接 充流体和挤压绝缘电缆 充流体和干型电缆终端
| Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above - Fluid-filled and extruded insulation cables - Fluid-filled and dry type cable-terminations
|
| IEC/TS 61244-3-2005
| 高聚物的长期辐射老化.第3部分:低压电缆材料的使用中监测规程
| Long-term radiation ageing in polymers - Part 3: Procedures for in-service monitoring of low-voltage cable materials
|
| IEC/TS 61873-2001
| 5类以上传输特性的对绞/星绞对称电缆的当前技术发展
| State of the art for symmetrical pair/quad cables with transmission characteristics beyond category 5
|
| IEC/TS 62100-2004
| 地面航行照明原电路用电缆
| Cables for aeronautical ground lighting primary circuits
|
| 编号 | 中文名称 | 英文名称 |
|---|