| 编号 | 中文名称 | 英文名称 |
|---|
| BS 1344-16-1998
| 釉层精整试验方法.第16部分.烹饪器具涂层耐热冲击性
| Methods of testing vitreous enamel finishes - Resistance to thermal shock of coatings on cooking utensils
|
| BS 1494-1-1964
| 建筑用固定附件规范.第1部分:板材、屋面与墙壁涂层用固定件
| Specification for fixing accessories for building purposes - Fixings for sheet, roof and wall coverings
|
| BS 2F 127-1991
| 航空航天用天然或合成弹性体涂层尼龙织物规范
| Specification for nylon fabrics suitable for coating with natural or synthetic elastomers for aerospace purposes
|
| BS 2X 35-2003
| 航空航天用选择性可除去的中间涂层
| Selectively removable intermediate coating for aerospace purposes
|
| BS 3424-0-2000
| 涂层织物的试验.各部分的索引
| Testing coated fabrics - Index of parts
|
| BS 3424-12-1996
| 涂层织物试验.加速老化试验
| Testing coated fabrics - Accelerated ageing tests
|
| BS 3424-13-1999
| 涂层织物试验.光隙试验色牢度方法的选择指南
| Testing coated fabrics - Guide to the selection of methods for colour fastness to light testing
|
| BS 3424-1989
| 涂层织物试验方法.第19部分:方法22A、22B 及22C.硫锈蚀性的测定
| Testing coated fabrics. Methods 22A, 22B and 22C. Determination of sulphur staining
|
| BS 3424-22-1983
| 涂覆织物试验.方法22.聚氯乙烯涂层的熔化度和硫化橡胶涂层的硫化度测定方法
| Testing coated fabrics - Method 25 - Methods for determination of fusion of PVC coatings and the state of cure of vulcanized rubber coatings
|
| BS 3424-25-1993
| 涂覆织物试验方法.方法25:涂层厚度和任一扩展层厚度测量方法
| Testing coated fabrics - Method 28 - Method for determination of the coating thickness and thickness of any expanded layer
|
| BS 3424-8-1983
| 涂层织物试验.方法10A、10B及10C.低温性能的测定方法
| Testing coated fabrics - Methods 10A, 10B and 10C - Methods for determination of low temperature performance
|
| BS 3546-2001
| 生产防水渗透布料用的涂层织物
| Coated fabrics for use in the manufacture of water penetration resistant clothing
|
| BS 3900-A10-1998
| 涂料试验方法.液体涂料试验(不包括化学试验).第A10部分:通过干燥涂层的密度测量测定非挥发物质的容积百分比
| Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating
|
| BS 3900-F10-1985
| 涂料试验方法.第F集:涂料膜耐久性试验.第10部分:海洋环境中涂层耐阴极解粘合性测定
| Methods of test for paints - Determination of resistance to cathodic disbonding of coatings for use in marine environments
|
| BS 3900-F11-1985
| 涂料试验方法.第F集:涂料膜的耐久性试验.第11部分:陆基地下结构用涂层耐阴极解粘合性测定
| Methods of test for paint - Durability tests on paint films - Determination of resistance to cathodic disbonding of coatings for use on land-based buried structures
|
| BS 3900-F17-1998
| 涂料试验方法.第F节：涂料膜的耐久性试验.第17部分：涂层耐湿刮和清洁度的测定
| Methods of test for paint. Durability tests on paint films. Determination of wet-scrub resistance and cleanability of coatings
|
| BS 3900-J1-1993
| 涂料的试验方法.第J1部分：涂层粉末试验.涂层粉末取样
| Methods of test for paints. Testing of coating powders. Sampling of coating powders
|
| BS 3900-J11-1997
| 涂料试验方法.粉末涂层的试验.第J11部分:涂覆粉末流测定(斜面变型法)
| Methods of test for paints - Testing of coating powders - Determination of flow of coating powders (inclined-plane method)
|
| BS 3900-J2-1993
| 涂料试验方法.第J2部分:粉末涂层粒径分布筛分测定
| Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving
|
| BS 3900-J3-1998
| 涂料试验方法.涂粉试验.第J3部分:涂层粉末凝胶时间测定
| Methods of test for paints - Testing of coating powders - Determination of gel time of coating powders
|
| BS 3900-J5-1993
| 涂料试验方法.第J5部分:粉末涂层加热质量损失测定
| Methods of test for paints - Testing of coating powders - Determination of loss of mass of coating powders on heating
|
| BS 3900-J6-1993
| 涂料试验方法.第J6部分:粉末涂层试验.用气体比对测重计测定粉末涂层密度(参照法)
| Methods of test for paints - Testing of coating powders - Determination of density of coating powders by gas comparison pyknometer (referee method)
|
| BS 3900-J7-1993
| 涂料试验方法.第J7部分:粉末涂层试验.用液体位移比重计测定粉末涂层密度
| Methods of test for paints - Testing of coating powders - Determination of density of coating powders by liquid displacement pyknometer
|
| BS 3900-J8-1993
| 涂料的试验方法.第J8部分:粉末涂层防爆下限的计算
| Methods of test for paints - Testing of coating powders - Calculation of lower explosion limit of coating powders
|
| BS 3900-J9-1993
| 涂料试验方法.第J9部分:粉末涂层/气体混合物流动特性测定
| Methods of test for paints - Testing of coating powders - Determination of flow properties of a coating powder/air mixture
|
| BS 4393-1991
| 组件终端用可焊锡或锡-铅涂层导线规范
| Specification for solderable tin or tin-lead coated wires for component terminations
|
| BS 4842-1984
| 凃用于外部建筑的铝合金挤压件、薄板材和预成型件上的液态有机涂层和液态有机涂层的规范
| Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings
|
| BS 5367-1976
| 涂层磨料的尺寸
| Dimensions of coated abrasives
|
| BS 5599-1993
| 工程用铝及其合金强阳极氧化涂层规范
| Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes
|
| BS 5664-3.11-1995
| 电绝缘不溶可聚合树脂化合物.第3部分:各型材料规范.第11节:环氧树脂基涂层粉末
| Solventless polymerisable resinous compounds used for electrical insulation - Specification for individual materials - Epoxy resin-based coating powders
|
| BS 5790-2-1995
| 室内装饰用涂覆织物.第2部分:聚氯乙烯涂层机织物规范
| Coated fabrics for upholstery - Specification for PVC coated woven fabrics
|
| BS 6359-1983
| 缩微平片标题涂层(彩色条)尺寸和位置规范
| Specification for dimensions and position of microfiche heading coating (colour stripe)
|
| BS 6404-12-1993
| 磁性材料.第12部分:层间隔热涂层保温性能的评定方法指南
| Magnetic materials - Guide to methods of assessment of temperature capability of interlaminar insulation coatings
|
| BS 6404-20-1996
| 磁性材料.第20部分:绝缘涂层的电阻和温度分类
| Magnetic materials - Resistance and temperature classification of insulation coatings
|
| BS 6408-1983
| 防潮湿天气用的涂层织物雨衣规范
| Specification for clothing made from coated fabrics for protection against wet weather
|
| BS 6496-1984
| 施加并焙固于铝合金的挤压材、板材和预成型材(外部建筑用)的粉末有机涂层和带有粉末有机涂层的铝合金挤压材
| Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
|
| BS 6949-1991
| 与饮用水接触除外的冷用沥青基涂层规范
| Specification for bitumen-based coatings for cold application excluding use in contact with potable water
|
| BS 7079-A1 Supplement 1-1996
| 涂料和有关产品涂层前钢基片的制备.第A1集:表面清洁度目测评定.第1部分:采用不同磨料进行喷沙除锈时钢片表
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives
|
| BS 7079-A1-1989
| 涂料和有关产品应用前钢基片的制备.表面清洁度视觉评定.未涂层钢基片和钢基片全部清除原涂层以后生锈程度和
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Specification for rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
| BS 7079-A2-1996
| 涂料和有关产品涂层前钢基片的制备.第A2集:表面清洁度目测评定.第1部分:局部清除原涂层后原涂层的钢片底基
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized removal of previous coatings
|
| BS 7079-B3-1993
| 涂料和有关产品应用前钢基片的制备.表面清洁度评定方法.第B3部分:准备涂层(压敏带方法)的钢基面尘垢评定
| Preparation of steel substrates before application of paints and related products. Methods for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
|
| BS 7371-1-1991
| 金属紧固件涂层.一般要求和选择指南规范
| Coatings on metal fasteners - Specification for general requirements and selection guidelines
|
| BS 7371-10-1994
| 金属紧固件涂层.第10部分:有机涂层规范
| Coatings on metal fasteners - Specification for organic coatings
|
| BS 7371-2-1993
| 金属紧固件涂层.扭矩/夹紧力关系式规范
| Coatings on metal fasteners - Specification for torque/clamping force relationship
|
| BS 7371-4-1994
| 金属紧固件涂层.第4部分:电镀镍、镍/铬和铜/镍/铬涂层规范.
| Coatings on metal fasteners - Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings
|
| BS 7371-6-1998
| 金属紧固件涂层.热浸镀锌涂层的规范
| Coatings on metal fasteners - Specification for hot dipped galvanized coatings
|
| BS 7371-7-1994
| 金属紧固件涂层.采用机械法施加锌涂层规范
| Coatings on metal fasteners - Specification for mechanically applied zinc coatings
|
| BS 7371-8-1998
| 金属紧固件涂层.粉末镀锌涂层规范
| Coatings on metal fasteners - Specification for sherardized coatings
|
| BS 7371-9-1996
| 金属紧固件涂层.磷酸盐涂层或油涂层规范
| Coatings on metal fasteners - Specification for phosphate or phosphate and oil coatings
|
| BS 7442-0-1991
| 橡胶或塑料涂层辊子.第0部分:导言
| Rubber or plastics covered rollers - Introduction
|
| BS 7442-1-1991
| 有橡胶或塑料涂层的辊子.术语词汇
| Rubber or plastics covered rollers - Glossary of terms
|
| BS 7442-2-1991
| 有橡胶或塑料涂层的辊子.第2部分:由买方提供的技术信息推荐标准
| Rubber or plastics covered rollers - Recommendations for technical information to be provided by the purchaser
|
| BS 7442-3.1-1998
| 橡胶或塑料涂层的辊子.试验方法.表观硬度测定(IRHD方法)
| Rubber or plastics covered rollers - Method of test - Determination of apparent hardness (IRHD method)
|
| BS 7442-3.2-1991
| 有橡胶或塑料涂层辊子.第3部分:试验方法.第2节:肖氏(SHORE)硬度测定
| Rubber or plastics covered rollers - Method of test - Determination of Shore hardness
|
| BS 7442-3.3-1992
| 橡胶或塑料涂层的辊子.第3部分:试验方法.第3节:采用普西和琼斯法测定表面硬度
| Rubber or plastics covered rollers - Method of test - Determination of apparent hardness by the Pusey and Jones method
|
| BS 7442-4.1-1992
| 有橡胶或塑料涂层辊子.要求.表观硬度规范
| Rubber or plastics covered rollers - Requirements - Specification for apparent hardness
|
| BS 7442-4.2-1994
| 有橡胶或塑料涂层的辊子.要求.表面精度分类
| Rubber or plastics covered rollers - Requirements - Classification by surface finish
|
| BS 7442-4.3-1993
| 有橡胶或塑料涂层辊子.第4部分:要求.第3节:尺寸公差规范
| Rubber or plastics covered rollers - Requirements - Specification for dimensional tolerances
|
| BS 7664-2000
| 底涂层和表面精制涂料规范
| Specification for undercoat and finishing paints
|
| BS 7793-1-1995
| 螺栓固定钢板的瓷釉涂层.农业用泥浆罐的螺栓固定钢板的涂层规范
| Vitreous enamel coatings for use on bolted steel panels - Specification for coatings on bolted steel panels for use in agricultural slurry tanks
|
| BS 7793-2-1996
| 栓接钢板用瓷釉涂层.第2部分:工业液体储罐用栓接钢板瓷釉涂层规范
| Vitreous enamel coatings for use on bolted steel panels - Specification for coatings on bolted steel panels for use in industrial liquid storage tanks
|
| BS 7822-3-1995
| 低压系统设备的绝缘调整.第3部分:印制电路板组件为达到绝缘调整的涂层使用
| Insulation coordination for equipment within low-voltage systems - Use of coatings to achieve insulation coordination of printed board assemblies
|
| BS 8000-12-1989
| 建筑工地操作工艺.第12部分:装饰墙面涂层和涂漆实用规程
| Workmanship on building sites - Code of practice for decorative wallcoverings and painting
|
| BS 8202-1-1995
| 建筑构件的防火涂层.无机物喷涂的选择与设置实用规程
| Coatings for fire protection of building elements - Code of practice for the selection and installation of sprayed mineral coatings
|
| BS 8202-2-1992
| 建筑构件的防火涂层.防火用金属衬底膨胀涂层使用实用规程
| Coatings for fire protection of building elements - Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance
|
| BS 8216-1991
| 建筑物用隔热和吸声喷涂轻质矿物涂层实用规程
| Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings
|
| BS A 303-1994
| 强度等级小于或等于1100 MPa的有涂层或无涂层短长度或中长度MJ螺纹的由金属材料制成的标称12角螺栓头标称杆
| Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 304-1994
| 强度等级小于或等于1100 MPa的有涂层或无涂层长长度MJ螺纹的由金属材料制成的标称12角螺栓头标称或节径杆螺
| Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 307-1994
| 强度等级小于或等于1100 MPa的有涂层或无涂层长长度MJ螺纹由金属材料制成的标称花键头、标称或节径杆螺栓.
| Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 308-1994
| 强度等级小于或等于1100 MPa的有涂层或无涂层短长度或中长度MJ螺纹的由金属材料制成的标称花键头标称杆螺栓
| Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 309-1994
| 强度等级小于或等于1100 MPa的有涂层或无涂层长长度MJ螺纹的由金属材料制成的大六角头标称或节径杆螺栓.尺
| Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 310-1995
| 强度等级小于或等于1250MPa-1800MPa的有涂层或无涂层短长度或中长度MJ螺纹的由金属材料制成的标称大12角螺
| Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions
|
| BS A 311-1997
| 航空航天.强度级小于或等于1100 MPa的涂层或未涂层金属材料标称杆短长度或中等长度MJ螺纹的内部偏移十字形
| Aerospace - Screws, 100 ° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 312-1997
| 强度级小于或等于1100MPa的涂层或未涂层金属材料制阶梯形杆、短长度或中等长度MJ螺纹的内偏移十字形肋状或
| Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 313-1997
| 航空航天.强度级小于或等于1100MPa的涂层或未涂层金属材料制节径杆长长度MJ螺纹的内偏移十字形肋状或非肋状
| Areospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 322-1998
| 内分支凸型或非凸型驱动的金属材料涂层或未土层的强度级低于或等于1100Mpa的平头带螺纹螺钉.尺寸
| Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 331-1998
| 强度级小于或等于1275MPa的涂层或未涂层金属材料制标称或节径杆长长度MJ螺纹扎制双六角头螺拴.尺寸
| Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa - Dimensions
|
| BS DD CEN/TS 1071-10-2004
| 高级工业陶瓷.陶瓷涂层的试验方法.横切法测定涂层厚度
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by cross section
|
| BS DD CEN/TS 1071-11-2007
| 高级工业陶瓷.陶瓷涂层的试验方法.利用Stoney公式计算内应力
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of internal stress by the Stoney formula
|
| BS DD CEN/TS 1071-7-2003
| 高级工业陶瓷.陶瓷涂层的试验方法.用仪器化刻痕试验测定硬度及杨式模量
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of hardness and Young's modulus by instrumented indentation testing
|
| BS DD CEN/TS 1071-8-2005
| 高级工业陶瓷.陶瓷涂层的试验方法.粘着性评定用洛氏针入试验
| Advanced technical ceramics - Methods of text for ceramic coatings - Rockwell indentation test for evaluation of adhesion
|
| BS DD CEN/TS 14234-2003
| 与食品接触的材料和物品.纸和纸板的聚合物涂层.总迁移的条件和试验方法的选择指南
| Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration
|
| BS DD CEN/TS 14235-2003
| 与食品接触的材料和物品.金属基上的聚合物涂层.总迁移的条件和试验方法的选择指南
| Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration
|
| BS DD ENV 1071-5-1995
| 高级工业陶瓷.陶瓷涂层的试验方法.孔隙率测定
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of porosity
|
| BS DD ENV 1071-6-2002
| 高级工业陶瓷.陶瓷涂层的试验方法.用微磨损损耗试验测定耐磨性
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of the abrasion resistance of coatings by a micro-abrasion wear test
|
| BS EN 10169-2-2006
| 连续有机涂层(盘绕涂层)变平钢轧材.建筑物外部用品
| Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
|
| BS EN 10169-3-2003
| 连续有机涂层(盘绕涂层)变平钢轧材.建筑物内部用品
| Continuously organic coated (coil coated) steel flat products - Products for building interior applications
|
| BS EN 10202-2001
| 冷缩电解铬产品.电解锡板和电解铬氧化涂层钢
| Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
|
| BS EN 10244-1-2001
| 钢丝及其制品.钢丝上的非有色金属涂层.一般原理
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - General principles
|
| BS EN 10244-2-2001
| 钢丝及其制品.钢丝上的非有色金属涂层.锌和锌合金涂层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Zinc or zinc alloy coatings
|
| BS EN 10244-3-2001
| 钢丝及其制品.钢丝上的非有色金属涂层.铝涂层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Aluminium coatings
|
| BS EN 10244-4-2001
| 钢丝及其制品.钢丝上的非有色金属涂层.锡涂层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Tin coatings
|
| BS EN 10244-5-2001
| 钢丝及其制品.钢丝上的非有色金属涂层.镍涂层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Nickel coatings
|
| BS EN 10244-6-2001
| 钢丝及其制品.钢丝上的非有色金属涂层.铜,青铜或黄铜涂层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Copper, bronze or brass coatings
|
| BS EN 10245-1-2001
| 钢丝及其制品.钢丝上的有机涂层.一般规则
| Steel wire and wire products - Organic coatings on steel wire - General rules
|
| BS EN 10245-2-2001
| 钢丝及其制品.钢丝上的有机涂层.PVC精制线
| Steel wire and wire products - Organic coatings on steel wire - PVC finished wire
|
| BS EN 10245-3-2001
| 钢丝及其制品.钢丝上的有机涂层.PE涂层线
| Steel wire and wire products - Organic coatings on steel wire - PE coated wire
|
| BS EN 10245-4-2003
| 钢丝和钢丝产品.钢丝上的有机涂层.聚酯涂覆钢丝
| Steel wire and wire products - Organic coatings on steel wire - Polyester coated wire
|
| BS EN 10288-2002
| 岸上和近海管道用钢管及配件.外部的双层挤压聚乙烯基涂层
| Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
|
| BS EN 10290-2002
| 岸上和近海输油管用钢管和配件.用于外部液体的聚氨酯和改性聚氨酯脂涂层
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
|
| BS EN 10300-2005
| 近岸和海上管道用钢管和配件.外涂层用沥青热涂覆材料
| Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
|
| BS EN 10301-2003
| 岸上及海底管道用钢管及配件.非腐蚀性气体的输送用减少摩擦的内涂层
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
|
| BS EN 10310-2004
| 岸上和海底管路用钢管和配件.聚酰胺粉末基内外涂层
| Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
|
| BS EN 1071-4-2006
| 高级工业陶瓷.陶瓷涂层的试验方法.用电子探针微量分析(EPMA)测定化学成分
| Advanced technical ceramics - Methods of test for ceramic coatings - Determination of chemical composition by electron probe microanalysis (EPMA)
|
| BS EN 1096-1-1999
| 建筑玻璃.涂层玻璃.定义和分类
| Glass in building - Coated glass - Definitions and classification
|
| BS EN 1096-2-2001
| 建筑物玻璃.涂层玻璃.A,B,S涂层的要求和试验方法
| Glass in building - Coated glass - Requirements and test methods for class A, B and S coatings
|
| BS EN 1096-3-2001
| 建筑物玻璃.涂层玻璃.C,D涂层的要求和试验方法
| Glass in building - Coated glass - Requirements and test methods for class C and D coatings
|
| BS EN 1096-4-2004
| 建筑玻璃.涂层玻璃.合格评价/产品标准
| Glass in building - Coated glass - Evaluation of conformity/Product standard
|
| BS EN 12068-1999
| 阴极保护.埋于地下的或浸于水中的钢管外部防腐有机涂层.磁带和可缩材料
| Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
|
| BS EN 12206-1-2004
| 颜料和清漆.建筑用铝和铝合金涂层.涂覆粉末制涂层
| Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Coatings prepared from coating powder
|
| BS EN 12280-1-1998
| 橡胶或塑料涂层织物.加速老化试验.热老化
| Rubber- or plastics-coated fabrics - Accelerated ageing tests - Heat ageing
|
| BS EN 12280-2-2002
| 橡胶或塑料涂层织物.加速老化试验.物理性老化:光和气候的影响
| Rubber- or plastics-coated fabrics - Accelerated ageing tests - Physical ageing: effect of light or weathering
|
| BS EN 12280-3-2002
| 橡胶或塑料涂层织物.加速老化试验.环境老化
| Rubber- or plastics-coated fabrics - Accelerated ageing tests - Environmental ageing
|
| BS EN 12373-10-1999
| 铝和铝合金.阳极氧化.使用磨损射流设备测定阳极氧化镀涂层主要特殊磨损抗性
| Aluminium and aluminium alloys - Anodizing - Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
|
| BS EN 12373-2-1999
| 铝和铝合金.阳极氧化.阳极氧化涂层单位面积(表面密度)质量的测定.重量剂法
| Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
|
| BS EN 12373-3-1999
| 铝和铝合金.阳极氧化.阳极氧化涂层单位面积(表面密度)质量的测定.分束显微镜无损测量
| Aluminium and aluminium alloys - Anodizing - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
|
| BS EN 12472-2005
| 涂层部件镍释放量的检测用磨损和腐蚀的模拟方法
| Method for the simulation of wear and corrosion for the detection of nickel release from coated items
|
| BS EN 12487-2007
| 金属的腐蚀防护.铝和铝合金上经清洗和未清洗的铬酸盐转化涂层
| Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
|
| BS EN 12508-2000
| 金属和合金的腐蚀保护.表面处理,金属和其它无机涂层.术语
| Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary
|
| BS EN 12757-1-2005
| 涂层材料用搅拌机械.安全要求.车辆表面整修用的搅料机械
| Mixing machinery for coating materials - Safety requirements - Mixing machinery for use in vehicle refinishing
|
| BS EN 12981-2005
| 涂层设备.喷涂有机粉末涂层材料的喷涂室.安全要求
| Coating plants - Spray booths for application of organic powder coating material - Safety requirements
|
| BS EN 13113-2002
| 制革机.滚动涂层机的安全性要求
| Tannery machines - Roller coating machines - Safety requirements
|
| BS EN 13144-2003
| 金属和其他无机涂层.用抗拉试验定量测量粘着性的方法
| Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
|
| BS EN 13266-2002
| 缓慢释放化肥.用涂层肥料法测定营养释放性能
| Slow-release fertilizers - Determination of the release of the nutrients - Method for coated fertilizers
|
| BS EN 13360-2002
| 橡胶或塑料涂层织物.术语
| Rubber- or plastics-coated fabrics - Terminology
|
| BS EN 13438-2005
| 涂料和清漆.建筑用镀锌或镀锌粉钢产品用的粉末有机涂层
| Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes
|
| BS EN 13523-1-2001
| 卷材覆层金属.试验方法.涂层厚度
| Coil coated metals - Test methods - Coating thickness
|
| BS EN 13676-2001
| 接触食品的聚合物涂层纸和纸板.针孔检测
| Polymer coated paper and board intended for food contact - Detection of pinholes
|
| BS EN 13811-2003
| 粉末镀锌.铁产品上锌扩散涂层.规范
| Sherardizing - Zinc diffusion coatings on ferrous products - Specification
|
| BS EN 13920-15-2003
| 铝和铝合金.废料.已去除废铝包装件中涂层的铝废料
| Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium packagings
|
| BS EN 13938-6-2004
| 民用爆炸物.推进剂和火箭推进剂.固态火箭推进剂.抑制剂涂层完整性的测定指南
| Explosives for civil uses - Propellants and rocket propellants - Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings
|
| BS EN 13966-1-2003
| 液态涂层材料用雾化及喷涂设备输送效率的测定.平板条
| Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Flat panels
|
| BS EN 1403-1998
| 金属腐蚀防护.电镀涂层.一般要求的规定方法
| Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements
|
| BS EN 14099-2002
| 航天产品保证.用压敏带测量涂层的剥离和撕开强度
| Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
|
| BS EN 14431-2005
| 釉和搪瓷.用于建筑钢板的瓷釉涂层的特性
| Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture
|
| BS EN 14628-2005
| 球墨铸铁管、配件和附件.管道外部聚乙烯涂层.要求和试验方法
| Ductile iron pipes, fittings and accessories - External polythene coating for pipes - Requirements and test methods
|
| BS EN 14863-2005
| 釉瓷和搪瓷.热交换器中使用的涂搪瓷钢板的边缘涂层的测定
| Vitreous and porcelain enamels — Determination of the edge covering on enamelled steel plate to be used in heat exchangers
|
| BS EN 14879-1-2005
| 工业设备防腐蚀介质腐蚀用有机涂层系统和内衬.衬底的术语、设计和制备
| 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Terminology, design and preparation of substrate
|
| BS EN 14879-2-2006
| 防止工业装置和设备受侵蚀物体腐蚀用有机涂覆系统和衬料.第2部分:金属构件涂层
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media — Part 2: Coatings on metallic components
|
| BS EN 14879-3-2006
| 防止侵蚀物体腐蚀工业装置和设备用有机涂层系统和衬料.第3部分:混凝土构件涂层
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media — Part 3: Coatings on concrete components
|
| BS EN 14879-4-2007
| 防止工业装置和设备受侵入介质腐蚀的有机涂层系统和衬料.金属构件衬料
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Linings on metallic components
|
| BS EN 14879-5-2007
| 防止工业装置和设备受侵入介质腐蚀的有机涂层系统和衬料.混凝土构件衬料
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Linings on concrete components
|
| BS EN 14882-2005
| 橡胶或塑料涂层织物.静摩擦和动摩擦系数的测定
| Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction
|
| BS EN 14901-2006
| 球墨铸铁管、配件和附件.球墨铸铁配件及附件的环氧涂层(重载).要求和试验方法
| Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
|
| BS EN 15189-2006
| 球墨铸铁管、配件和附件.管道外部聚亚安酯涂层.要求和试验方法
| Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
|
| BS EN 15205-2006
| 测定防腐涂层六价铬元素.质量分析
| Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis
|
| BS EN 15340-2007
| 热喷涂.热喷涂层耐剪切负荷的测定
| Thermal spraying - Determination of shear load resistance of thermally sprayed coatings
|
| BS EN 1876-1-1998
| 橡胶或塑料涂层织物.低温试验.弯曲试验
| Rubber- or plastics-coated fabrics - Low temperature tests - Bending test
|
| BS EN 1910-2000
| 木材、拼花地板和木材镶板及涂层.尺寸稳定性测定
| Wood and parquet flooring and wood panelling and cladding - Determination of dimensional stability
|
| BS EN 2437-2002
| 航空航天系列.铝及铝合金的铬酸盐转化涂层(黄色)
| Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys
|
| BS EN 2591-508-2002
| 电气和光学连接元件.试验方法.触点涂层厚度的测量
| Elements of electrical and optical connection - Test methods - Measurement of thickness of coating on contacts
|
| BS EN 2591-509-2001
| 电气和光学连接元件.试验方法.触点涂层的附着力
| Elements of electrical and optical connection - Test methods - Adhesion of coating on contacts
|
| BS EN 28094-1994
| 输送机用钢丝帘布输送带.夹芯层涂层粘附强度试验
| Steel cord conveyor belts - Adhesion strength test of the cover to the core layer
|
| BS EN 2828-1993
| 采用抛光法对金属涂层的粘合试验
| Adhesion test for metallic coatings by burnishing
|
| BS EN 4421-2007
| 航空航天系列.带锯齿状、耐腐蚀钢锁紧环的、镀MoS2涂层的、TI-P64001钛合金螺柱.强度等级:1100MPa(环境温度
| Aerospace series - Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature)
|
| BS EN 4458-2005
| 航空航天系列.带锯齿状锁紧环耐腐蚀钢镀MoS2涂层的TI-P64001型钛合金MJ螺纹螺柱.强度等级:1100MPa(室温).技
| Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001 , MoS2 coated, with serrated locking ring in corrosion resisting steel.Strengt h class: 1100 MPa (at ambient temperature) - Technicalspecification
|
| BS EN 4496-2005
| 航空航天系列.有色铝涂层、阳极化的、钛合金、短螺纹、紧公差标称杆、偏位十字凹槽沉头标称100 °螺钉.等级
| Aerospace series - Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
|
| BS EN 4497-2005
| 航空航天系列.有色铝涂层、阳极化的、钛合金、短螺纹、紧公差标称杆、偏位十字凹槽盘头螺钉.等级:1100MPa(
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
|
| BS EN 4498-2005
| 航空航天系列.有色铝涂层、钝化的、耐热镍基合金、中等长度螺纹、紧公差标称杆、大双六角头螺栓.等级:1550M
| Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 °C
|
| BS EN 4501-2006
| 航空航天系列.带镀铝涂层的阳极电镀钛合金短螺纹紧公差标准柄正六角头螺栓、米制系列.等级:1100MPa(室温)/3
| Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C
|
| BS EN 4509-2006
| 航空航天系列.带镀铝涂层阳极氧化的钛合金螺纹延伸到螺头100°沉头偏置十字凹槽螺钉、米制系列.等级:1100MP
| Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C
|
| BS EN 582-1994
| 热喷涂层的试验.抗拉胶粘强度的测定
| Thermal spraying - Determination of tensile adhesive strength
|
| BS EN 60317-1996
| 特殊型绕组线规范.聚酰亚胺涂层的软焊聚酰胺酯包漆圆铜线.130类
| Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130
|
| BS EN 60317-21-1996
| 特种绕组线规范.聚酰亚胺涂层的软钎焊聚酰胺酯漆包圆铜线.155类
| Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
|
| BS EN 60684-3-300-2002
| 绝缘软套管.各种型号软套管规范要求.无涂层的玻璃纤维编织软套管
| Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile fibre sleeving, braided, uncoated
|
| BS EN 60684-3-343 to 345-2002
| 绝缘软套管规范.各种型号套管的规范要求.无涂层可扩张编织的乙烯-三氟氯乙烯(E-CTFE)纺织套管
| Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated
|
| BS EN 61249-5-4-1997
| 内部连接结构材料.有或无涂层的导电箔和导电膜分规范.导电墨水
| Materials for interconnection structures - Sectional specification set for conductive foils and films with and without coatings - Conductive inks
|
| BS EN 61249-8-7-1997
| 互连接结构用材料.不导电薄膜和涂层分规范.打印油墨
| Materials for interconnection structures - Sectional specification set for non-conductive films and coatings - Marking legend inks
|
| BS EN 61249-8-8-1997
| 连接结构用材料.非导电膜和涂层分规范.临时聚合物规范
| Materials for interconnection structures - Sectional specification set for non-conductive films and coatings - Temporary polymer coatings
|
| BS EN 61788-3-2006
| 超导性.临界电流测量.涂层银或银合金的Bi-2212和Bi-2223氧化超导体的直流临界电流
| Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
|
| BS EN 846-13-2001
| 圬工用的辅助部件的试验方法.有机涂层耐冲击性、耐磨性及耐腐蚀性的测定
| Methods of test for ancillary components for masonry - Determination of resistance to impact, abrasion and corrosion of organic coatings
|
| BS EN ISO 105-X10-1996
| 纺织品.色牢度试验.第X10部分:纺织品颜色向聚氯乙烯涂层迁移的评定
| Textiles - Tests for colour fastness - Assessment of migration of textile colours into polyvinyl chloride coatings
|
| BS EN ISO 11124-2-1994
| 用涂层材料及有关产品涂覆前钢基体的准备工作.金属喷情理磨料的规范.冷淬铁砂粒
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Chilled-iron grit
|
| BS EN ISO 11124-4-1994
| 用涂层材料涂覆前钢基体的预处理.喷射金属清理磨料的规范.低碳铸钢丸
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Low-carbon cast-steel shot
|
| BS EN ISO 11507-2007
| 涂料和清漆.涂层暴露于人工风蚀.暴露于荧光紫外灯和水
| Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water
|
| BS EN ISO 11644-2003
| 皮革.涂层粘着牢度测定方法
| Leather - Test for adhesion of finish
|
| BS EN ISO 11998-2006
| 涂料和清漆.涂层耐湿洗和清洁度的测定
| Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
|
| BS EN ISO 12683-2004
| 机械镀锌涂层.规范和试验方法
| Mechanically deposited coatings of zinc - Specification and test methods
|
| BS EN ISO 12944-1-1998
| 涂料和清漆.防护涂层系统对钢结构的腐蚀防护.一般说明
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - General introduction
|
| BS EN ISO 12944-2-1998
| 涂料和清漆.防护涂层系统对钢结构的腐蚀防护.环境的分类
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Classification of environments
|
| BS EN ISO 12944-3-1998
| 涂料和清漆.防护涂层系统对钢结构的腐蚀防护.设计所需考虑的诸因素
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Design considerations
|
| BS EN ISO 12944-4-1998
| 涂料和清漆.防护涂层系统对钢结构的腐蚀防护.表面类型和表面予处理制备
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Types of surface and surface preparation
|
| BS EN ISO 12944-6-1998
| 涂料和清漆.防护涂层系统对钢结构的腐蚀防护.实验室性能试验方法
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Laboratory performance test methods
|
| BS EN ISO 12944-7-1998
| 涂料和清漆.防护涂层系统对钢结构的腐蚀防护.涂漆工艺的实施和管理
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Execution and supervision of paintwork
|
| BS EN ISO 12944-8-1998
| 涂料和清漆.防护涂层系统对钢结构的腐蚀防护.新工艺作及维修规范的编制
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Development of specifications for new work and maintenance
|
| BS EN ISO 1421-1998
| 橡胶或塑料涂层织物.拉伸强度和断裂伸长率的测定
| Rubber-or plastics-coated fabrics - Determination of tensile strength and elongation at break
|
| BS EN ISO 14373-2007
| 电阻焊接.无涂层和有涂层低碳钢的点焊程序
| Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels
|
| BS EN ISO 1460-1995
| 金属镀层.铁类材料的热浸镀锌涂层.用重量测定法测定单位面积重量
| Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
|
| BS EN ISO 14713-1999
| 铁和钢结构的防腐.锌和铝涂层.指南
| Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines
|
| BS EN ISO 15695-2001
| 釉瓷和搪瓷.搪瓷涂层耐划痕性的测定
| Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes
|
| BS EN ISO 15720-2001
| 金属覆层.孔隙率试验.凝胶材料电谱法测定金属基体上金或钯涂层的孔隙率
| Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
|
| BS EN ISO 15721-2001
| 金属覆层.孔隙率试验.用亚硫酸和二氧化硫蒸汽对金和钯涂层孔隙率的测定
| Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
|
| BS EN ISO 16276-1-2007
| 防护涂料系统对钢结构的腐蚀防护.涂层粘附/粘聚(断裂强度)的评定和验收标准.脱落测试
| Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing
|
| BS EN ISO 16276-2-2007
| 防护涂料系统对钢结构的腐蚀防护.涂层粘附/粘聚(断裂强度)的评定和验收标准.划格测试和X切割测试
| Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Cross-cut testing and X-cut testing
|
| BS EN ISO 16348-2003
| 金属和其他无机涂层.定义和表观约定
| Metallic and other inorganic coatings - Definitions and conventions concerning appearance
|
| BS EN ISO 16773-1-2007
| 涂料和清漆.高阻抗涂层试样的电气化学阻抗频谱(EIS).术语和定义
| Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Terms and definitions
|
| BS EN ISO 16773-2-2007
| 涂料和清漆.高阻抗涂层试样的电气化学阻抗频谱(EIS).数据收集
| Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Collection of data
|
| BS EN ISO 17186-2003
| 皮革.物理和机械试验.表面涂层厚度的测定
| Leather - Physical and mechanical tests - Determination of surface coating thickness
|
| BS EN ISO 17233-2003
| 皮革.物理和机械试验.表面涂层低温龟裂温度的测定
| Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
|
| BS EN ISO 17834-2003
| 热喷涂.高温腐蚀和氧化防护涂层
| Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures
|
| BS EN ISO 17872-2007
| 涂料和清漆.腐蚀试验用金属板涂层画线器标记的入门指南
| Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
|
| BS EN ISO 20566-2005
| 涂料和清漆.实验室洗车测定涂层系统的耐划痕性
| Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash
|
| BS EN ISO 20567-1-2005
| 涂料和清漆.涂层耐石片划痕测定.多冲击测试
| Paints and varnishes - Determination of stone-chip resistance of coatings - Multi-impact testing
|
| BS EN ISO 20567-2-2005
| 涂料和清漆.涂层耐石片划痕测定.带导向冲击体的单冲击试验
| Paints and varnishes - Determination of stone-chip resistance of coatings - Single-impact test with a guided impact body
|
| BS EN ISO 21227-2-2007
| 涂料和清漆.用光学成象评估涂层表面缺陷.多功能石头切割试验的评定规程
| Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Evaluation procedure for multi-impact stone-chipping test
|
| BS EN ISO 21227-3-2007
| 涂料和清漆.用光学成象评定涂层表面缺陷.划痕周围剥层和腐蚀的评定
| Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Evaluation of delamination and corrosion around a scribe
|
| BS EN ISO 2286-2-1998
| 橡胶或塑料涂覆织物.卷料参数的测定.涂料单位面积总质量、单位涂层面积的质量和基体单位面积质量的测定方法
| Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
|
| BS EN ISO 2411-2000
| 橡胶或塑料涂层织物.涂层粘合力的测定
| Rubber or plastics-coated fabrics - Determination of coating adhesion
|
| BS EN ISO 2808-2007
| 色漆和清漆.涂层厚度的测定
| Paints and varnishes - Determination of film thickness
|
| BS EN ISO 2810-2004
| 色漆和清漆.涂层的自然风化.暴露和评定
| Paints and varnishes - Natural weathering of coatings - Exposure and assessment
|
| BS EN ISO 3868-1995
| 金属和其他无机物涂层.涂层厚度测量.菲索(Fizeau)多光束干涉仪法
| Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method
|
| BS EN ISO 4543-1995
| 金属镀层和其它无机物涂层.储存腐蚀试验一般规程
| Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions
|
| BS EN ISO 4628-6-2007
| 涂料和清漆.涂层降解的评定.缺陷数量和大小及外表均衡变化强度的标识.用粘胶带法评估粉化等级
| Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Assessment of degree of chalking by tape method
|
| BS EN ISO 5470-2-2003
| 橡胶或塑料涂层织物.耐磨损性测定.马丁代尔研磨器
| Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Martindale abrader
|
| BS EN ISO 6179-2001
| 硫化或热塑橡胶.橡胶薄板和橡胶涂层织物.挥发性液体扩散速度的测定(重力测重技术)
| Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
|
| BS EN ISO 6945-1996
| 橡胶软管.外涂层耐磨性的测定
| Rubber hoses - Determination of abrasion resistance of the outer cover
|
| BS EN ISO 6988-1986
| 金属涂层和其它无机物涂层.普通水汽冷凝二氧化硫试验
| Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture
|
| BS EN ISO 7623-1996
| 钢丝绳芯输送带.缆索涂层粘合力试验.初始试验和后期热量处理
| Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment
|
| BS EN ISO 8501-1-2007
| 涂料和相关产品使用前钢衬底的处理.表面清洁度的目测评估.未涂覆钢衬底和彻底清除原有涂层后钢衬底的锈蚀等
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
| BS EN ISO 8501-2-1996
| 涂油漆和有关产品前钢基底预处理.表面清洁度的目视评定.局部去除原有涂层后钢基底的处理等级
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized removal of previous coatings
|
| BS EN ISO 8980-4-2006
| 眼科光学.未切边的成品眼镜片.防反射涂层规范和试验方法
| Ophthalmic optics - Uncut finished spectacle lenses - Specifications and test methods for anti-reflective coatings
|
| BS F 131-1986
| 航空航天用氯磺化聚乙烯橡胶涂层尼龙织物(300g/m)规范
| Specification for chlorosulphonated polyethylene rubber coated nylon fabric (300 g/m2) for aerospace purposes
|
| BS F 136-1989
| 航空航天用氯磺化聚乙烯橡胶涂层尼龙织物(190g/m**2)规范
| Specification for pigmented chlorosulphonated polyethylene rubber-coated nylon fabric (190 g/m2) for aerospace purposes
|
| BS G 211-1971
| 仪表窗口与光楔降低反射涂层规范
| Specification for reflection-reducing coating of instrument windows and lighting wedges
|
| BS ISO 10110-9-1996
| 光学及光学仪器.光学元件和系统图纸的制备.第9部分:表面处理和涂层
| Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface treatment and coating
|
| BS ISO 10587-2000
| 金属和其它无机覆层.金属覆层和非涂层外螺纹件和棒材残余脆性试验
| Metallic and other inorganic coatings - Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods - Inclined wedge method
|
| BS ISO 10713-1997
| 珠宝.金合金涂层
| Jewellery - Gold alloy coatings
|
| BS ISO 13779-4-2002
| 外科植入物.羟磷灰石.涂层粘结强度的测定
| Implants for surgery - Hydroxyapatite - Determination of coating adhesion strength
|
| BS ISO 1434-1996
| 包装式天然橡胶.包装涂层量的测定
| Natural rubber in bales - Amount of bale coating - Determination
|
| BS ISO 14647-2000
| 金属涂层.金属基质金涂层孔隙率的测定.硝酸蒸发试验
| Metallic coatings - Determination of porosity on gold coatings on metallic substrates - Nitric acid vapour test
|
| BS ISO 14656-2000
| 混凝土加筋钢涂层用环氧树脂粉末和密封材料
| Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
|
| BS ISO 14788-2005
| 连续热浸镀锌5%铝合金涂层钢薄板
| Continuous hot-dip zinc-5% aluminium alloy coated steel sheet
|
| BS ISO 15724-2001
| 金属和其它无机涂层.钢的可扩散氢的电化测量.茗荷芥(Barnacle)电极法
| Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method
|
| BS ISO 15730-2001
| 金属和其他无机涂层.采用电解抛光精加工和钝化不锈钢
| Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel
|
| BS ISO 15741-2002
| 油漆和清漆.岸上和近海铺设的无腐蚀气体钢管道内侧的减小摩擦涂层
| Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
|
| BS ISO 16132-2004
| 球墨铸铁管和配件.水泥灰浆衬套的密封涂层
| Ductile iron pipes and fittings - Seal coats for cement mortar linings
|
| BS ISO 16172-2006
| 波纹钢管用连续热浸金属涂层钢板
| Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
|
| BS ISO 20566-2005
| 色漆和清漆.通过实验室洗车测定涂层系统的耐划痕性
| Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash
|
| BS ISO 20567-1-2005
| 色漆和清漆.涂层的耐石片划性的测定.多冲击试验
| Paints and varnishes - Determination of stone-chip resistance of coatings - Multi-impact testing
|
| BS ISO 20567-2-2005
| 色漆和清漆.涂层的耐石片划性的测定.导向冲击体单冲击试验
| Paints and varnishes - Determination of stone-chip resistance of coatings - Single-impact test with a guided impact body
|
| BS ISO 22778-2006
| 金属涂层.在铁和钢表面上物理蒸发沉淀镉.规范和试验方法
| Metallic coatings - Physical vapour-deposited coatings of cadmium on iron and steel - Specification and test methods
|
| BS ISO 3011-1997
| 橡胶或塑料涂层织物.静态条件下抗臭氧龟裂的测定
| Rubber- or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions
|
| BS ISO 5473-1997
| 橡胶或塑料涂层织物.耐挤压性测定
| Rubber or plastics-coated fabrics - Determination of crush resistance
|
| BS ISO 6179-1998
| 硫化或热塑橡胶.橡胶薄板材和橡胶涂层织物.挥发性液体传输速度测定(比重测量技术)
| Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique)
|
| BS ISO 6452-2007
| 橡胶或塑料涂层织物.汽车内装饰材料雾气凝结特征的测定
| Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles
|
| BS ISO 7229-1997
| 橡胶或塑料涂层织物.透气性测量
| Rubber- or plastics-coated fabrics - Measurements of gas permeability
|
| BS ISO 7989-1-2006
| 钢丝和钢丝制品.钢丝的有色金属涂层.一般原则
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - General principles
|
| BS ISO 7989-2-2007
| 钢丝和钢丝制品.钢丝的有色金属涂层.锌或锌合金涂覆
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Zinc or zinc-alloy coating
|
| BS ISO 9211-1-1995
| 光学和光学仪器.光学涂层.定义
| Optics and optical instruments - Optical coatings - Definitions
|
| BS ISO 9211-2-1995
| 光学和光学仪器.光学涂层.光学性能
| Optics and optical instruments - Optical coatings - Optical properties
|
| BS ISO 9211-3-1995
| 光学和光学仪器.光学涂层.环境耐久性
| Optics and optical instruments - Optical coatings - Environmental durability
|
| BS ISO 9211-4-2006
| 光学和光学仪器.光学涂层.特定的试验方法
| Optics and optical instruments - Optical coatings - Specific test methods
|
| BS L 109-1971
| 铝-铜(4.4)-镁(1.5)-锰(0.6)合金铝涂层薄板和带材规范(溶液处理和室温时效)
| Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
|
| BS L 110-1971
| 铝-铜(4.4)-镁(1.5)-锰(0.6)合金铝涂层薄板材和带材规范(由用户进行溶液处理)
| Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6)
|
| BS L 163-1978
| 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(溶液处理、冷加工压平和室温时效)
| Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated , cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
|
| BS L 164-1978
| 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(固溶处理和室温时效的)
| Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
|
| BS L 165-1978
| 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金薄板材和带材规范(固溶处理和人工时效的)
| Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
|
| BS L 166-1978
| 铝涂层铝-铜(4.4)-镁(0.5)-硅(0.8)-锰(0.8)合金紧公差薄板材和带材规范(溶液处理和室温时效)
| Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
|
| BS M 40-1972
| 用无损试验法测量涂层厚度的方法
| Methods for measuring coating thickness by non-destructive testing
|
| BS M 58-1986
| 采用硫酸处理工艺的钛和钛合金阳极涂层规范
| Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process
|
| DD ENV 1071-1-1994
| 高技术陶瓷.陶瓷涂层的试验方法.通过接触探头轮廓测定仪测定涂层厚度
| Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by contact probe profilometer
|
| DD ENV 1071-2-1994
| 高技术陶瓷.陶瓷涂层试验方法.用切头磨削法对涂层厚度的测定
| Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by the cap grinding method
|
| DD ENV 1071-4-1996
| 高技术陶瓷.陶瓷涂层试验方法.第4部分:化学成分测定
| Advanced technical ceramics. Methods of test for ceramic coatings. Determination of chemical composition
|
| DD ENV 1071-5-1995
| 高技术陶瓷.陶瓷涂层试验方法.第5部分:孔隙度的测定
| Advanced technical ceramics. Methods of test for ceramic coatings. Determination of porosity
|
| DD ENV 927-2-2000
| 涂料和清漆.外部木材用涂层材料和涂层方法.性能规范
| Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification
|
| 编号 | 中文名称 | 英文名称 |
|---|