| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 18366-2006
| 建筑合同程序(VOB).第C部分:建筑合同通用技术规范(ATV).墙和天花板装饰涂层的应用
| Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Application of decorative coverings on walls and ceilings
|
| DIN 18556-1985
| 合成树脂灰浆涂层材料和合成树脂灰浆的检验
| Testing of coating material for synthetic resin plasters and of synthetic resin plasters
|
| DIN 19306-2-2002
| 纸.印刷纸.第2部分:白色涂层和无涂层胶版印刷纸的交货技术规范
| Paper - Printing paper - Part 2: Technical delivery specifications for offset-paper, coated and uncoated, white
|
| DIN 19307-1997
| 纸和纸板.无涂层办公用纸.要求和试验
| Paper and board - Office paper, uncoated - Requirements, test methods
|
| DIN 22100-6-1993
| 地下矿井用合成器材和材料.薄板、涂层和非涂层织物.隔板材料和垫板.安全要求.检验.标识
| Articles and materials from synthetic for use in underground mines; sheeting, coated/uncoated tissue, brattice materials and lagging mats; safety requirements, testing, marking
|
| DIN 22115-2003
| 地下煤矿开采用带式输送机.托辊的涂层.要求和检验
| Belt conveyors for underground coalmining - Coating on idlers - Requirements and testing
|
| DIN 28052-5-1997
| 化工设备.工艺技术设备中混凝土构件非金属材料表面处理.第5部分:合成涂层
| Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 5: Combined coatings
|
| DIN 28125-3-1989
| 具有保护环和表面涂层的圆形绞链式闸板.第3部分:额定直径 DN 500 和 DN 600
| Hinged covers; circular shape with protection ring and surface coated; DN 500 and DN 600
|
| DIN 29597-1995
| 航空航天.液体涂层材料的应用
| Aerospace - Application of liquid coating materials
|
| DIN 29970-1998
| 航空航天.酚醛树脂涂层的聚酰胺纸制蜂窝芯.技术规范
| Aerospace - Honeycomb cores of polyamide paper, phenolic resin coated - Technical specification
|
| DIN 30672-2000
| 持续工作温度不超过50℃的地下和水下管道外部有机防腐涂层.带材和可收缩材料
| External organic coatings for the corrosion protection of buried and immersed pipelines for continuous operating temperatures up to 50 °C - Tapes and shrinkable materials
|
| DIN 30674-2-1992
| 球墨铸铁管用水泥砂浆涂层.要求和检验
| Cement mortar coatings for ductile iron pipes; requirements and testing
|
| DIN 30677-1-1991
| 埋设管道的腐蚀保护.第1部分:公称要求的涂层
| Corrosion protection of burried valves; coating for normal requirement
|
| DIN 30677-2-1988
| 埋设管件的外部防腐处理.第2部分:加厚式热固性塑料涂层
| External corrosion protection of buried valves; heavy-duty thermoset plastics coatings
|
| DIN 30678-1992
| 钢管的聚丙烯涂层
| Polypropylene coatings for steel pipes
|
| DIN 4681-3-1986
| 地下安装用钢制固定点增压式液化气储罐.第3部分:具有抗化学和机械侵蚀特殊性能的外部防腐涂层
| Steel fixed site pressurized LPG tanks for underground installation; exterior corrosion protecting coating with special performance against chemical and mechanical attacks
|
| DIN 4753-10-1989
| 饮用水和服务性用水的热水器和水加热装置.第10部分:无涂层的钢容器阴极的防腐要求和检验
| Water heating installations for drinking water and service water; cathodic corrosion protection of uncoated steel vessels; requirements and testing
|
| DIN 4753-4-1994
| 饮用水和服务性用水的热水器和水加热装置.第4部分:采用高温固化的硬塑料涂层材料作触水面的防腐保护.要求和
| Water heaters and water heating installations for drinking water and service water - Part 4: Corrosion protection on the water side by means of hot-setting, duroplastic coating materials; requirements and testing
|
| DIN 4753-5-1994
| 饮用水和服务性用水的热水器和水加热装置.第5部分:采用天然或合成橡胶制成的箔片涂层作触水面的防腐保护.要
| Water heaters and water heating installations for drinking water and service water - Part 5: Corrosion protection on the water side by means of foil coating made from natural or synthetic rubber; requirements and testing
|
| DIN 4945-1-2005
| 抽水用带抗拉套管的出水竖管.第1部分：DN 50至 DN 200的塑料涂层钢管
| Rising pipes with tension proof socket for water raising - Part 1: Steel pipes DN 50 to DN 200, plastic coated
|
| DIN 50022-2007
| 金属和其它无机涂层.多层镍镀层中单层的同步厚度和电极电势测定(STEP试验)
| Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP Test)
|
| DIN 50453-2-1990
| 半导体工艺材料的检验.蚀刻混合剂浸蚀率的测定.第2部分:二氧化硅涂层.光学法
| Testing of materials for semiconductor technology; determination of etch rates of etching mixtures; silicium-dioxid coating; optical method
|
| DIN 50455-1-1991
| 半导体工艺材料的检验.表示光致抗蚀剂特性的方法.第1部分:用光学测量法对涂层厚度的测定
| Testing of materials for semiconductor technology; methods for characterizing photoresists; determination of coating thickness with optical methods
|
| DIN 50903-1967
| 金属涂层.气孔，夹杂，气泡与裂纹.定义
| Metallic Coatings; Pores, Inclusions, Blisters and Cracks, Definitions
|
| DIN 50923-2004
| 电镀层.铁或钢上带有机涂层的锌或锌合金涂层的双涂层
| Electroplated coatings - Duplex coatings of zinc or zinc alloy coatings with organic coatings on iron or steel
|
| DIN 50928-1985
| 金属腐蚀.对与含水腐蚀剂接触的涂层金属材料防腐检验和评定
| Corrosion of metals; testing and assessment of the corrosion protection of coated metallic materials in contact with aqueous corrosive agents
|
| DIN 50933-1987
| 涂层厚度测量.使用触针仪器以差动测量法测量涂层厚度
| Measurement of coating thickness by differential measurement using a stylus instrument
|
| DIN 50938-2000
| 铁和钢的黑色氧化涂层.要求和试验方法
| Black oxide coatings on iron or steel - Requirements and test methods
|
| DIN 50960-2-2006
| 电镀涂层.第2部分:技术图纸的说明
| Electroplated coatings - Part 2: Indications on technical drawings
|
| DIN 50962-1998
| 电镀涂层.铁和钢件上锌合金铬酸钝化涂层
| Electrodeposited coatings - Chromated coatings of zinc alloys on iron and steel
|
| DIN 50986-1979
| 涂层厚度的测量.测量涂层及类似的涂覆层厚度的楔式切割法
| Measurement of coating thickness; Wedge cut method for measuring the thickness of paints and related coatings
|
| DIN 50988-2-1988
| 涂层厚度测量.用涂层材料溶解作用测量铁素体材料上涂层的单位面积锌和锡的重量.容量分析法
| Measurement of coating thickness; determination of the mass per unit area of zinc and tin-coatings on ferrous materials by dissolution of the coating material; volumetric method
|
| DIN 50990-1993
| 涂层厚读的测量.用原子吸收光谱法测量金属镀层单位面积的质量
| Measurement of coating thickness; determination of the mass per unit area of metallic coatings by atomic absorption spectrometric method; flame method, F AAS
|
| DIN 50991-1997
| 电解涂层.镀铬槽三氧化铬.要求和试验
| Electroplated coatings - Chromtrioxide for chromium baths - Requirements and testing
|
| DIN 52006-1-2006
| 沥青和沥青粘合剂.水对粘合剂涂层作用的测定试验方法.第1部分:乳化沥青粘合剂涂层
| Bitumen and bituminous binders - Test methods for the determination of the effect of water on binder coatings - Part 1: Bitumen emulsion binder coating
|
| DIN 52006-2-2006
| 沥青和沥青粘合剂.水对粘合剂涂层作用的测定试验方法.第2部分:石油轻制粘合剂涂层
| Bitumen and bituminous binders - Test methods for the determination of the effect of water on binder coatings - Part 2: Petroleum cutback binder coating
|
| DIN 52006-3-2006
| 沥青和沥青粘合剂.水对粘合剂涂层作用的测定试验方法.第3部分:软制沥青粘合剂涂层
| Bitumen and bituminous binders - Test methods for the determination of the effect of water on binder coatings - Part 3: Fluxed bitumen binder coating
|
| DIN 52452-4-1992
| 建筑结构用密封材料的检验.密封材料的兼容性.与其他防护涂层材料的可混用性
| Testing of sealing compounds in building constructions; compatibility of sealing products; compatibility with other protection coatings
|
| DIN 53100-2007
| 金属凃层.塑料材料上镍铬的电镀涂层和铜镍铬的电镀涂层
| Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials
|
| DIN 53150-2002
| 涂料和清漆.涂层干燥度的测定(修订的Bandow-Wolff方法)
| Paints and varnishes - Determination of the drying stage of coatings (modified Bandow-Wolff method)
|
| DIN 53154-1974
| 色漆、清漆和类似的涂覆材料的检验.对涂层和类似涂层进行的落球面试验
| Testing of paints, varnishes and similar coating materials; falling ball test on paint coatings and similar coatings
|
| DIN 53159-1999
| 油漆和清漆.用KEMPF法测定漆料涂层的白垩度
| Paints and varnishes - Determination of the degree of chalking of paint coatings by the Kempf method
|
| DIN 53174-2-1992
| 漆及类似涂层材料用溶剂.溶剂混合物的分析方法.气相色谱分析法
| Solvents for paints, varnishes and similar coating materials; methods of analysis for solvent mixtures; gas chromatographic method
|
| DIN 53215-1998
| 沥青和沥青粘合剂.沥青涂层材料中不挥发物质含量的测定.
| Bitumen and bituminous binders - Determination of the non-volatile matter content of bituminous coating materials
|
| DIN 53229-1989
| 油漆、清漆和类似涂层材料.用旋转式粘度计测定在剪切率下的粘度
| Paints, varnishes and similar coating materials; determination of viscosity at high shear rates using rotational viscometers
|
| DIN 53236-1983
| 着色剂的检验.测定色漆涂敷层、类似涂层和塑料色差的测量和评价条件
| Testing of colouring materials; conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics
|
| DIN 53350-1980
| 用塑料制造的塑料薄膜和涂层的纺织织物的检验.用Ohlsen法测定弯曲刚度
| Testing of plastics films and coated textile fabrics, manufactured using plastics; determination of stiffness in bending, method according to Ohlsen
|
| DIN 53362-2003
| 带或不带涂层织物的塑料薄膜和纺织物(无纺织物除外)的试验.抗弯强度的测定.悬臂式试验法
| Testing of plastics films and textile fabrics (excluding nonwovens), coated or not coated fabrics - Determination of stiffness in bending - Method according to Cantilever
|
| DIN 53528-1988
| 橡胶涂层的纺织物的试验.耐磨试验.用Frank-Hauser仪进行的质量损失测定
| Testing of rubber-coated textiles; abrasion test; determination of loss in mass by the Frank Hauser apparatus
|
| DIN 53781-2003
| 涂层材料.核设备涂层抗电离辐射试验方法
| Coating materials - Methods for testing the resistance of coatings to ionizing radiation in nuclear plants
|
| DIN 55607-2007
| 颜料和填充剂.施用后粉末涂层中填充剂的分散及其比色评估
| Pigments and extenders - Dispersion of pigments in powder coatings and their colorimetric evaluation after application
|
| DIN 55664-2007
| 涂料和清漆.涂层缺陷的目视评估
| Paints and varnishes - Visual assessment of coating defects
|
| DIN 55665-2007
| 涂料和清漆.涂层的自然风化.防腐蚀性能的测定
| Paints and varnishes - Natural weathering of coatings - Determination of corrosion protection performance
|
| DIN 55666-1995
| 涂层材料、三聚氰胺泡沫材料和纺织物甲醛排放检验.在小型试验室内对甲醛均衡化浓度的测定
| Testing of formaldehyde-emitting coating materials, melamin foams and textiles - Determination of the equalization concentration of formaldehyde in a small test chamber
|
| DIN 55670-1994
| 油漆和清漆.用高电压对油漆涂层和类似涂层进行气孔和裂纹试验
| Paints and varnishes; method for testing paint coatings and similar coatings for pores and cracks, using high-voltage
|
| DIN 55682-2000
| 色漆和清漆溶剂.在水里可以稀释的涂层材料中的溶剂测定.气相色谱法
| Solvents for paints and varnishes - Determination of solvents in waterthinnable coating materials - Gas chromatographic method
|
| DIN 55683-1994
| 颜料和清漆用溶剂.只含有机溶剂的涂层材料溶剂的测定.气相色谱分析法
| Solvents for paints and varnishes - Determination of the solvents in coating materials containing organic solvents only - Gaschromatographic method
|
| DIN 55900-1-2002
| 散热器的涂层.第1部分:底层涂料和工业用底漆的术语、要求和试验
| Coatings for radiators - Part 1: Terms, requirements and tests for primers and industrially applied priming coats
|
| DIN 55900-2-2002
| 散热器的涂层.第2部分:精制漆和工业用精制漆的术语、要求和试验
| Coatings for radiators - Part 2: Terms, requirements and tests for finishing paints and industrially applied finishing coats
|
| DIN 55991-1-2003
| 涂层材料.核设施涂层.第1部分:要求和试验方法
| Coating materials - Coatings for nuclear facilities - Part 1: Requirements and test methods
|
| DIN 55991-2-1992
| 涂料.核设施用涂层.涂层材料的鉴定检验
| Coating materials; coatings for nuclear facilities; identity testing of coating materials
|
| DIN 55991-3-2003
| 涂料.核设施涂层.第3部分:涂覆作业、计划和程序
| Coating materials - Coatings in nuclear facilities - Part 3: Coating work, planning and procedure
|
| DIN 55996-3-2004
| 涂料和清漆.涂层耐石头划的试验.第3部分:带自由飞行冲击体的单一冲击试验
| Paints and varnishes - Stone chip resistance test for coatings - Part 3: Single impact test with free flying impact body
|
| DIN 58196-5-1995
| 光学涂层.第5部分:用布进行耐磨性试验
| Optical coatings - Part 5: Testing of the abrasion resistance with cloth
|
| DIN 58196-6-1995
| 光学涂层.第6部分:用胶带作粘附力的检验(胶带试验法)
| Optical coatings - Part 6: Testing of the adhesion with a tape (tape test)
|
| DIN 58197-1-2002
| 光学涂层.第1部分:抗反射涂层的最低要求
| Optical coatings - Part 1: Minimum requirements for antireflection coatings
|
| DIN 58197-2-2002
| 光学涂层.第2部分:反射镜涂层的最低要求
| Optical coatings - Part 2: Minimum requirements for mirror coatings
|
| DIN 58197-4-2007
| 光学涂层.第4部分:激光光学用涂层的最低要求
| Optical coatings - Part 4: Minimum requirements for coatings used for laser optics
|
| DIN 65046-2-1998
| 航空航天. 表面保护涂层的试验方法.油漆和清漆.第2部分:试样.试样的制备和干燥
| Aerospace - Methods of test for surface protective coatings; paints, varnishes - Part 2: Specimens, preparation of specimens, drying
|
| DIN 65046-3-1998
| 航空航天.表面保护涂层的试验方法.油漆和清漆.第3部分:按交货条件进行的试验
| Aerospace - Methods of test for surface protective coatings; paints and varnishes - Part 3: Tests in as-delivered condition
|
| DIN 65046-4-1998
| 航空航天.表面保护涂层的试验方法.尤其和清漆.第4部分:涂层试验
| Aerospace - Methods of test for surface protective coatings; paints, varnishes - Part 4: Testing of coatings
|
| DIN 65046-5-1998
| 航空航天.表面保护涂层的试验方法.油漆和清漆.第5部分:涂层阻力试验
| Aerospace - Methods of test for surface protective coatings; paints, varnishes - Part 5: Coating resistance tests
|
| DIN 65099-6-1989
| 航空和航天.专用工艺设施的分类.E类工艺.涂层
| Aerospace; classification of special workshop facilities; process group E; coating
|
| DIN 65183-1988
| 航空航天.为测定有机涂层耐侵蚀性能进行的雨水试验
| Aerospace; rain testing of organic coatings for the determination of the resistance to erosion
|
| DIN 65591-1998
| 航空航天.非涂层的宽幅织物.技术规范
| Aerospace - Broad woven fabric, uncoated - Technical specification
|
| DIN 6723-1-1997
| 数据处理用纸.文件分类阅读机用90克/平方米纸.第1部分:无覆面无涂层.要求和试验要求
| Papers for data processing - Paper for document reader sorter 90-g/m<(hoch)2>-substance - Part 1: Uncoated, untreated; requirements, test requirements
|
| DIN 6723-2-1997
| 数据处理用纸.文件分类阅读机用90克/平方米纸.第1部分:带覆面带涂层自复写.要求和试验方法
| Papers for data processing - Paper for document reader sorter 90-g/m<(hoch)2>-substance - Part 2: Coated, treated, self copying; requirements, test method
|
| DIN 6724-1-1997
| 数据处理纸.文件分类阅读机用65-85克/平方米纸.第1部分:无覆面无涂层.要求、试验
| Papers for data processing - Paper for document reader sorter 65- to 85-g/m<(hoch)2>-substance - Part 1: Uncoated, untreated; requirements, test method
|
| DIN 6724-2-1997
| 数据处理纸.文件分类阅读机用65-85克/平方米纸.第2部分:带覆面带涂层自复写.要求、试验
| Papers for data processing - Paper for document reader sorter 65- to 85-g/m<(hoch)2>-substance - Part 2: coated, treated, self copying; requirements, test method
|
| DIN 7868-3-1986
| 橡胶和塑料涂层辊子.第3部分:尺寸公差和形位公差
| Rubber and plastics covered rollers; dimensional and geometrical tolerances
|
| DIN 80200-2007
| 造船用钢制部件.表面预处理、预涂底漆和底漆涂层用符号
| Steel components for shipbuilding - Symbols used for surface preparations, shop primers and priming coats
|
| DIN 8541-3-1995
| 焊接、切割和相关工艺用橡胶软管.第3部分:特殊要求用有涂层和无涂层的氧化橡胶软管.安全要求和检验
| Rubber hoses for welding, cutting and allied processes - Part 3: Oxygen rubber hoses with and without coatings for special requirements; safety requirements and testing
|
| DIN CEN/TS 1071-10-2004
| 高级工业陶瓷.陶瓷涂层的试验方法.第10部分:由横切法测定涂层厚度
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning; German version CEN/TS 1071-10:2004
|
| DIN CEN/TS 1071-11-2006
| 高级工业陶瓷.陶瓷涂层的试验方法.第11部分:用Stoney公式测定内压
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula; German version CEN/TS 1071-11:2005
|
| DIN CEN/TS 1071-7-2003
| 高级工业陶瓷.陶瓷涂层的试验方法.第7部分:通过装有测量仪器的压痕试验测定硬度和杨氏模量
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 7: Determination of hardness and Young's modulus by instrumented indentation testing; German version CEN/TS 1071-7:2003
|
| DIN CEN/TS 1071-8-2004
| 高级工业陶瓷.陶瓷涂层的试验方法.第8部分:粘性评价的洛氏亚痕试验
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 8: Rockwell indentation test for evaluation of adhesion; German version CEN/TS 1071-8:2004
|
| DIN CEN/TS 1071-9-2004
| 高级工业陶瓷.陶瓷涂层的试验方法.第9部分:断裂应变的测定
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain; German version CEN/TS 1071-9:2004
|
| DIN CEN/TS 14234-2003
| 接触食品的材料和制品.纸和纸板的聚合涂层.总迁移的条件和试验方法的选择指南
| Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration; German version CEN/TS 14234:2002
|
| DIN CEN/TS 14235-2003
| 接触食品的材料和制品.金属基片的聚合涂层.全迁移条件和试验方法的选择指南; 德文版本 CEN/TS 14235:2002
| Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration; German version CEN/TS 14235:2002
|
| DIN EN 10051-1997
| 无涂层连续热轧非合金和合金钢板材、薄板材和带材.尺寸和外形公差 (包括修改件 A1:1997); 德文版本 EN 1005
| Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances of dimensions and shape (includes Amendment A1:1997); German version EN 10051:1991 + A1:1997
|
| DIN EN 10139-1997
| 冷成形加工用无涂层低碳钢冷轧窄带材.技术交货条件
| Cold rolled uncoated mild steel narrow steel strip for cold forming - Technical delivery conditions; German version EN 10139:1997
|
| DIN EN 10202-2001
| 冷轧锡产品.电解锡板和电解铬/氧化铬涂层钢
| Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel; German version EN 10202:2001
|
| DIN EN 10223-1-1998
| 栅栏用钢丝和钢丝制品.第1部分:锌和锌合金涂层的带刺钢丝
| Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire; German version EN 10223-1:1997
|
| DIN EN 10240-1998
| 钢管的内部和/或外部防护涂层.自动装置的热浸镀锌涂层规范
| Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants; German version EN 10240:1997
|
| DIN EN 10244-1-2001
| 钢丝和钢丝产品.钢丝有色金属涂层.第1部分:一般规则
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles; German version EN 10244-1:2001
|
| DIN EN 10244-2-2001
| 钢丝和钢丝产品.钢丝有色金属涂层.第2部分:锌和锌合金涂层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings; German version EN 10244-2:2001
|
| DIN EN 10244-3-2001
| 钢丝和钢丝产品.钢丝有色金属涂层.第3部分:铝涂层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; German version EN 10244-3:2001
|
| DIN EN 10244-4-2001
| 钢丝和钢丝产品.钢丝有色金属涂层.第4部分:锡涂层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings; German version EN 10244-4:2001
|
| DIN EN 10244-5-2001
| 钢丝和钢丝产品.钢丝有色金属涂层.第5部分:镍涂层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings; German version EN 10244-5:2001
|
| DIN EN 10244-6-2001
| 钢丝和钢丝产品.钢丝有色金属涂层.第6部分:铜、青铜和黄铜涂层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings; German version EN 10244-6:2001
|
| DIN EN 10245-1-2001
| 钢丝和钢丝产品.钢丝有机涂层.第1部分:一般规则
| Steel wire and wire products - Organic coatings on wire - Part 1: General rules; German version EN 10245-1:2001
|
| DIN EN 10245-2-2001
| 钢丝和钢丝产品.钢丝有机涂层.第2部分:PVC 涂层丝
| Steel wire and wire products - Organic coatings on wire - Part 2: PVC coated wire; German version EN 10245-2:2001
|
| DIN EN 10245-3-2001
| 钢丝和钢丝产品.钢丝有机涂层.第3部分:聚乙烯(PE)涂层丝
| Steel wire and wire products - Organic coatings on wire - Part 3: PE coated wire; German version EN 10245-3:2001
|
| DIN EN 10245-4-2003
| 钢丝和钢丝产品.钢丝上的有机涂层.第4部分:聚酯涂层丝
| Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2003
|
| DIN EN 10257-1-1998
| 铠装电力和通信电缆用锌或锌合金涂层的低碳钢丝.第1部分:陆地铺设的电缆
| Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 1: Land cables; German version EN 10257-1:1998
|
| DIN EN 10257-2-1998
| 铠装电力和通信电缆用锌或锌合金涂层的低碳钢丝.第2部分:海底铺设电缆
| Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 2: Submarine cables; German version EN 10257-2:1998
|
| DIN EN 10271-1998
| 电解分离锌-镍(ZN)涂层的平板钢制品.交货技术条件
| Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions; German version EN 10271:1998
|
| DIN EN 10288-2003
| 岸上和近海管线用钢管及配件.外部双层挤压聚乙烯基涂层
| Steel tubes and fittings for on and offshore pipelines - External two layer extruded polyethylene based coatings; German version EN 10288:2002
|
| DIN EN 10300-2006
| 近岸和海上管线用钢管和配件.外涂层用沥青热涂覆材料.德文版本 EN 10300-2005
| Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating; German version EN 10300:2005
|
| DIN EN 10301-2004
| 海上和近海管道用钢管和配件.降低无腐蚀气体运输摩擦的内涂层
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas; German version EN 10301:2003
|
| DIN EN 10310-2004
| 近海和海上管道用钢管和配件.内外部聚酰胺粉末基涂层
| Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings; German version EN 10310:2003
|
| DIN EN 10318-2005
| 锌和铝基金属涂层的厚度和化学成分的测定.常规法
| Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005
|
| DIN EN 10329-2006
| 岸上和海上管道用钢管和配件.外部连接涂层;德文版本EN 10329-2006
| Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings; German version EN 10329:2006
|
| DIN EN 1062-1-2004
| 色漆和清漆.外部砖石和混凝土用涂层材料和涂层系统.第1部分:分类
| Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification; German version EN 1062-1:2004
|
| DIN EN 1062-3-1999
| 油漆和清漆.外部砌砖体和混凝土用涂层材料和涂层系统.第3部分:液体－水传输(渗透)率的测定和分类
| Paints and varnishes - Coating materials and coating system for exterior masonry and concrete - Part 3: Determination and classification of liquid-water transmission rate (permeability); German version EN 1062-3:1998
|
| DIN EN 1062-6-2002
| 涂料和清漆.外墙砖石和混凝土用涂层材料和涂覆系统.第6部分:二氧化碳渗透性测定
| Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability; German version EN 1062-6:2002
|
| DIN EN 1062-7-2004
| 清漆和涂料.外部砖石和混凝土用涂层材料和涂层系统.第7部分:裂缝遮避性能的测定
| Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties; German version EN 1062-7:2004
|
| DIN EN 1071-4-2006
| 高级工业陶瓷.陶瓷涂层的试验方法.第4部分:使用电探针微量分析(EPMA)测量化学成分
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) English version of DIN EN 1071-4:2006-05
|
| DIN EN 1096-1-1999
| 建筑业玻璃.涂层玻璃.第1部分:定义和分率
| Glass in building - Coated glass - Part 1: Definitions and classification; German version EN 1096-1:1998
|
| DIN EN 1096-2-2001
| 建筑物玻璃.涂层玻璃.第2部分:A、B、S级涂层要求和试验方法
| Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings; German version EN 1096-2:2001
|
| DIN EN 1096-3-2001
| 建筑物玻璃.涂层玻璃.第3部分:C、D类涂层的要求和试验方法
| Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings; German version EN 1096-3:2001
|
| DIN EN 1096-4-2005
| 建筑物用玻璃.涂层玻璃.第4部分:合格评价/产品标准
| Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard; German version EN 1096-4:2004
|
| DIN EN 12206-1-2004
| 色漆和清漆.建筑用铝和铝合金涂层.第1部分:从涂料粉制备的涂层
| Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder; German version EN 12206-1:2004
|
| DIN EN 12280-2-2002
| 橡胶和塑料涂层织物.加速老化试验.第2部分:光和风化作用的物理老化; 德文版本 EN 12280-2:2001
| Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: Effect of light or weathering; German version EN 12280-2:2001
|
| DIN EN 12280-3-2002
| 橡胶或塑料涂层织物.加速老化试验.第3部分:环境老化; 德文版本 EN 12280-3:2002
| Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing; German version EN 12280-3:2002
|
| DIN EN 12332-1-1998
| 橡胶或塑料涂层的纺织物.破裂强度的测定.第1部分:钢球法
| Rubber or plastic coated fabrics - Determination of bursting strength - Part 1: Steel ball method; German version EN 12332-1:1998
|
| DIN EN 12332-2-2003
| 橡胶或塑料涂层织物.破裂强度测定.第2部分:液压法
| Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method; German version EN 12332-2:2002
|
| DIN EN 12373-10-1999
| 铝和铝合金.阳极处理.第10部分:用喷砂试验测量阳极化氧化涂层的特定平均耐磨性能
| Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN 12373-10:1998
|
| DIN EN 12373-2-1999
| 铝和铝合金.阳极处理.第2部分:阳极处理氧化涂层单位面积质量(与面积相关的质量)的测定.重力法
| Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass par unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998
|
| DIN EN 12373-3-1999
| 铝和铝合金.阳极处理.第3部分:阳极的氧化涂层厚度的测定.用裂隙梁显微镜进行无损测量
| Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings; non-destructive measurement by split-beam-microscope; German version EN 12373-3:1998
|
| DIN EN 12373-4-1999
| 铝和铝合金.阳极处理.第4部分:采用在酸处理之前用着色点滴试验密封后阳极化氧化涂层的吸收力损失量的估计
| Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment; German version EN 12373-4:1998
|
| DIN EN 12373-5-1999
| 铝和铝合金.阳极处理.第5部分:用测量公差方法对密封的阳极处理氧化涂层进行质量评定
| Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998
|
| DIN EN 12373-6-1999
| 铝和铝合金.阳极处理.第6部分:在预先未进行酸处理情况下涂层在铬酸/磷酸溶液中浸渍以后通过测定质量损耗对
| Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment; German version EN 12373-6:1998
|
| DIN EN 12373-7-2002
| 铝及铝合金.阳极氧化.第7部分:通过磷酸和铬酸溶液浸渍酸处理后测量质量损失评估密封阳极氧化涂层的质量; 德
| Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment; German version EN 12373-7:2002
|
| DIN EN 12373-8-1999
| 铝和铝合金.阳极处理.第8部分:着色阳极氧化处理氧化涂层的耐紫外线和热影响比较牢度的测定
| Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings; German version EN 12373-8:1998
|
| DIN EN 12373-9-1999
| 铝和铝合金.阳极化处理.第9部分:用砂轮磨损试验测量阳极处理氧化涂层的耐磨损性和磨损指数
| Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus; German version EN 12373-9:1998
|
| DIN EN 1244-1998
| 胶粘剂.在光线作用下粘接涂层的颜色和/或颜色变化的测定
| Adhesives - Determination of the colour and/or colour changes of adhesives coats under the influence of light; German version EN 1244:1998
|
| DIN EN 12472-2006
| 对涂层零部件上脱离的镍进行检测时使用的磨损和腐蚀模拟试验方法
| Method for the simulation of wear and corrosion for the detection of nickel release from coated items; German version EN 12472:2005
|
| DIN EN 12476-2001
| 金属的磷酸盐转化涂层.规定要求的方法
| Phosphate conversion coatings of metals - Method of specifying requirements; German version EN 12476:2000
|
| DIN EN 12487-2007
| 金属的腐蚀防护.铝和铝合金上经清洗和未清洗的铬酸盐转化涂层
| Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys; German version EN 12487:2007
|
| DIN EN 12508-2000
| 金属和合金的腐蚀防护.金属和其它非有机涂层的表面处理.词汇
| Corrosion protection of metals and alloys - Surface treatment, metallic and other non-organic coatings - Vocabulary; German version EN 12508:2000
|
| DIN EN 12581-2006
| 涂料.有机液体涂层材料的浸涂和电沉积用机械.安全要求.德文版本 EN 12581-2005
| Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements; German version EN 12581:2005
|
| DIN EN 12621-2006
| 压力下涂层材料的供应和循环用机器.安全性要求
| Machinery for the supply and circulation of coating materials under pressure - Safety requirements English version of DIN EN 12621:2006-05
|
| DIN EN 12629-5-4-2004
| 生产混凝土和硅酸盐建筑产品用机器.安全.第5-4部分:混凝土管道涂层机械
| Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines; German version EN 12629-5-4:2003
|
| DIN EN 12757-1-2006
| 涂层材料用搅拌机械.安全要求.第1部分:车辆表面整修用的搅拌机械
| Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing; German version EN 12757-1:2005
|
| DIN EN 12759-2001
| 橡胶或塑料涂层织物.耐液体性能测定
| Rubber- or plastic-coated fabrics - Determination of resistance to liquids; German version EN 12759:2001
|
| DIN EN 12981-2005
| 涂层设备.喷涂有机粉末涂层材料的喷涂室.安全要求
| Coating plants - Spray booths for application of organic powder coating material - Safety requirements; German version EN 12981:2005
|
| DIN EN 13113-2003
| 制革机.辊筒涂层机.安全要求
| Tannery machines - Roller coating machines - Safety requirements; German version EN 13113:2002
|
| DIN EN 13143-2003
| 金属和其他无机涂层.孔隙率.孔隙测试的定义和规定
| Metallic and other inorganic coatings - Porosity - Definitions and conventions of the testing of pores; German version EN 13143:2003
|
| DIN EN 13300-2002
| 涂料和清漆.内墙和天花板用水溶涂层材料和涂层系统.分类; 德文版本 EN 13300:2001 + AC:2002
| Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification; German version EN 13300:2001 + AC:2002
|
| DIN EN 13438 Berichtigung 1-2007
| 涂料和清漆.建筑用镀锌或镀锌粉钢产品用的粉末有机涂层
| Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes; German version EN 13438:2005, Corrigenda to DIN EN 13438:2006-01
|
| DIN EN 13438-2006
| 色漆和清漆.建筑用镀锌或粉末镀锌钢产品用的粉末有机涂层
| Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes; German version EN 13438:2005
|
| DIN EN 13494-2003
| 建筑物隔热产品.隔热材料基底涂层和粘合剂拉伸连接强度测定
| Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material; German version EN 13494:2002
|
| DIN EN 13523-15-2002
| 卷材涂层金属.试验方法.第15部分:位变异构; 德文版本 EN 13523-15:2002
| Coil coated metals - Test methods - Part 15: Metamerism; German version EN 13523-15:2002
|
| DIN EN 13523-18-2002
| 卷材涂层金属.试验方法.第18部分:耐染污性; 德文版本 EN 13523-18:2002
| Coil coated metals - Test methods - Part 18: Resistance to staining; German version EN 13523-18:2002
|
| DIN EN 13523-23-2002
| 卷材涂层金属.试验方法.第23部分:在含有二氧化硫湿气环境中的颜色的稳定性; 德文版本 EN 13523-23:2002
| Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide; German version EN 13523-23:2002
|
| DIN EN 13523-6-2002
| 卷材涂层金属.试验方法.第6部分:压痕后的粘合力 (深拉试验); 德文版本 EN 13523-6:2002
| Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test); German version EN 13523-6:2002
|
| DIN EN 13523-8-2002
| 卷材涂层金属.试验方法.第8部分:耐盐雾性; 德文版本 EN 13523-8:2002
| Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog); German version EN 13523-8:2002
|
| DIN EN 13603-2002
| 铜和铜合金.电力用拉丝圆形铜导线保护锡涂层评估的试验方法; 德文版本 EN 13603:2002
| Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes; German version EN 13603:2002
|
| DIN EN 13858-2007
| 金属的防腐蚀.铁或钢部件上非电解镀锌薄涂层
| Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components; English version of DIN EN 13858:2007-02
|
| DIN EN 13920-15-2003
| 铝和铝合金.废料.第15部分:去除涂层的用过的铝包装物废料
| Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings; German version EN 13920-15:2003
|
| DIN EN 13938-6-2004
| 民用爆炸物.推进剂和火箭推进剂.第6部分:固态火箭推进剂.抑制剂涂层完整性测定指南
| Explosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings; German version EN 13938-6:2004
|
| DIN EN 13966-1 Berichtigung 1-2007
| 液体涂层材料用雾化和喷射设备转换效率的测定.第1部分:平板
| Determination of the transfer effeciency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels; German version EN 13966-1:2003, Corrigenda to DIN EN 13966-1:2003-09
|
| DIN EN 13966-1-2003
| 液态涂层材料用雾化及喷涂设备输送效率的测定.第1部分:平板条
| Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels; German version EN 13966-1:2003
|
| DIN EN 1403-1998
| 金属防腐蚀.电镀涂层.规范一般要求的方法
| Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements; German version EN 1403:1998
|
| DIN EN 14099-2002
| 航空航天.航天产品保证.带压敏胶粘带的涂层和装饰层的剥离和拉脱强度的测量; 德文和英文版本 EN 14099:2001
| Aerospace - Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes with pressure-sensitive tapes; German and English version EN 14099:2001
|
| DIN EN 14135-2004
| 涂层.防火能力的测定
| Coverings - Determination of fire protection ability; German version EN 14135:2004
|
| DIN EN 14431-2004
| 釉和搪瓷.用于建筑钢板的瓷釉涂层的特性
| Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture; German version EN 14431:2004
|
| DIN EN 14628-2006
| 球墨铸铁管、配件和附件.管外层聚乙烯涂层.要求和试验方法
| Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods; German version EN 14628:2005
|
| DIN EN 14854-2006
| 气溶胶容器.玻璃容器.瓶颈涂层尺寸.德文版本 EN 14854-2005
| Aerosol containers - Glass containers - Dimensions of the neck finish; German version EN 14854:2005
|
| DIN EN 14879-1-2005
| 工业装置和设备用防腐蚀剂引起腐蚀的有机涂层系统和衬料.第1部分：衬底的术语、设计和准备.德文版本 EN 148
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate; German version EN 14879-1:2005
|
| DIN EN 14879-2-2007
| 防侵蚀物体引起腐蚀的工业装置和设备用有机涂层系统和衬料.第2部分:金属构件涂层
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components; English version of DIN EN 14879-2:2007-02
|
| DIN EN 14879-3-2007
| 防侵蚀物体引起腐蚀的工业装置和设备用有机涂层系统和衬料.第3部分:混凝土构件涂层
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components; English version of DIN EN 14879-3:2007-02
|
| DIN EN 14879-5-2007
| 防止侵蚀物体腐蚀工业装置和设备用有机涂层系统和衬料.第5部分:混凝土构件衬料
| Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components; German version EN 14879-5:2007
|
| DIN EN 14901-2006
| 球墨铸铁管、配件和附件.球墨铸铁配件及附件的环氧涂层(重载).要求和试验方法
| Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods English version of DIN EN 14901:2006-08
|
| DIN EN 15042-1-2006
| 涂层厚度测量和有表面波的表面特性化.第1部分:采用激光感应表面声波法对各膜层的弹性常数、密度和厚度的测
| Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves English version of DIN EN 15042-1:2006-06
|
| DIN EN 15060-2006
| 色漆和清漆.内部使用的家具的木基材料的涂层系统的分类和选择指南
| Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use; English version of DIN EN 15060:2006-10
|
| DIN EN 15189-2007
| 球墨铸铁管、配件和附件.管道外部聚亚安酯涂层.要求和试验方法
| Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods; English version of DIN EN 15189:2007-02
|
| DIN EN 15311-2007
| 热喷涂.带热喷涂涂层的部件.技术提供条件
| Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions; German version EN 15311:2007
|
| DIN EN 15340-2007
| 热喷涂.热喷涂涂层耐剪切负荷的测定
| Thermal spraying - Determination of shear load resistance of thermally sprayed coatings; German version EN 15340:2007
|
| DIN EN 15457-2007
| 涂料和清漆.防霉菌涂层中薄膜防腐剂功效的测试用实验室方法
| Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi; German version EN 15457:2007
|
| DIN EN 15458-2007
| 涂料和清漆.防藻类涂层中薄膜防腐剂功效的测试用实验室方法
| Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae; German version EN 15458:2007
|
| DIN EN 1734-1997
| 带橡胶和塑料涂层的织物.水密性测定.低压法
| Rubber- or plastics coated fabrics - Determination of resistance to water penetration - Low pressure method; German version EN 1734:1996
|
| DIN EN 1735-1997
| 带橡胶和塑料涂层的织物.柔韧性测定
| Rubber- or plastics coated fabrics - Determination of flexibility; German version EN 1735:1996
|
| DIN EN 1816-1998
| 地板弹性铺覆物.带泡沫材料涂层的均质和非均质平面地板弹性铺覆物规范
| Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing; German version EN 1816:1998
|
| DIN EN 1875-3-1998
| 橡胶或塑料涂层的织物.撕裂强度的测定.第3部分:梯形试样法
| Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method; German version EN 1875-3:1997
|
| DIN EN 1953-1998
| 涂层材料用喷雾器和喷射器.安全性要求
| Atomising and spraying equipment for coating materials - Safety requirements; German version EN 1953:1998
|
| DIN EN 2068-1996
| 航空航天系列.带关节轴承和自润滑涂层的吊环端头.交货技术条件
| Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996
|
| DIN EN 2437-2003
| 航空航天系列.铝及铝合金铬酸盐转化涂层(黄色)
| Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys; German and English version EN 2437:2001
|
| DIN EN 2591-508-2003
| 航空航天系列.光电连接元件.试验方法.第508部分:触点涂层厚度测量
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 508: Measurement of thickness of coating on contacts; German and English version EN 2591-508:2001
|
| DIN EN 2591-509-2003
| 航空航天系列.光电连接元件.试验方法.第509部分:触点涂层附着力
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 509: Adhesion of coating on contacts; German and English version EN 2591-509:2001
|
| DIN EN 25978-1993
| 橡胶或塑料涂层织物.抗堵塞性的测定
| Rubber- or plastics-coated fabrics; determination of blocking resistance (ISO 5978:1990); German version EN 25978:1993
|
| DIN EN 28094-1994
| 钢缆输送机带.缆索芯线涂层的粘合强度试验
| Steel cord conveyor belts; adhesion strength test of the cover to the core layer (ISO 8094:1984); German version EN 28094:1994
|
| DIN EN 2828-1993
| 航空航天.用抛光法试验金属涂层的粘附强度
| Aerospace series; adhesion test for metallic coatings by burnishing; german version EN 2828:1993
|
| DIN EN 2829-1995
| 航空航天系列.采用喷丸处理法对金属涂层进行附着强度试验; 德文版本 EN 2829:1994
| Aerospace series - Adhesion test for metallic coatings by shot peening; German version EN 2829:1994
|
| DIN EN 2830-1993
| 航空航天.用切剪法试验金属涂层的粘附强度
| Aerospace series; adhesion test for metallic coatings by shearing action; german version EN 2830:1993
|
| DIN EN 3720-1995
| 航空航天系列.加 MoS<下标2> 涂层的耐高温钢 FE-PA92HT(A286) 自锁十二角螺母.等级:1100 MPa (室温)/425℃;
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3720:1995
|
| DIN EN 3721-1995
| 航空航天系列.加 MoS<下标2> 涂层的耐高温钢 FE-PA92HT(A286) 深沉孔自锁十二角螺母.等级:1100 MPa (室温)/
| Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3721:1995
|
| DIN EN 3722-1995
| 航空航天系列.加 MoS<下标2> 涂层的耐高温钢FE-PA92HT(A286)自锁铆钉体螺母.等级:1100MPa(室温)/425℃; 德
| Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3722:1995
|
| DIN EN 4312-2007
| 航空和航天系列.钝化铝合金涂层耐腐蚀耐热中长螺纹粗公差递减柄螺栓.等级:1100MPa(室温下)/315℃
| Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4312:2006
|
| DIN EN 4402-2007
| 航空航天系列.米制有铝色涂层钛合金TI-P64001紧公差剪切式100°埋头标准钉锁紧螺栓.等级:1100 MPa (常温)/3
| Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4402:2006
|
| DIN EN 4458-2006
| 航空航天系列.带耐腐钢制锯齿型锁环的MoS2涂层的TI-P64001型钛合金制MJ螺纹螺柱.强度分类:1100 MPa（周围环
| Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1100 MPa (at ambient temperature) - Technical specification; German and English version EN 4458:2005
|
| DIN EN 4495-2007
| 航空和航天系列.钝化铝合金涂层阳极电镀钛合金短螺纹紧配合标准柄正十二头螺栓.等级:1100MPa(室温下)/315℃
| Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4495:2006
|
| DIN EN 4497-2007
| 带铝有色涂层阳极电镀钛合金短螺纹紧公差标称柄偏位十字凹槽平头螺钉.分类:1100MPa(室温)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4497:2005
|
| DIN EN 4508-2007
| 航空航天系列.涂料和清漆.防滑涂层的试验方法.滑动摩擦性能的测定
| Aerospace series - Paints and varnishes - Test method for anti slip coatings - Determination of the sliding friction behaviour; German and English version EN 4508:2006
|
| DIN EN 50177-2007
| 易燃涂层粉末用自动静电喷涂设备
| Automatic electrostatic spraying equipment for flammable coating powder; German version EN 50177:2006
|
| DIN EN 60317-13-1995
| 特定型号绕组线规范.第13部分:用聚酰胺-酰亚胺涂层的聚酯或聚酰胺酯漆包圆铜线,200级
| Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 (IEC 60317-13:1990); German version EN 60317-13:1994
|
| DIN EN 60317-13/A1-1997
| 特种绕组线规范.第13部分:用聚酰胺-酰亚胺额外涂层的聚酯或聚酰胺酯的上釉圆铜线.200级.修改件A1 (IEC 6031
| Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200; Amendment A1 (IEC 60317-13:1990/A1:1997); German version EN 60317-13/A1:1997
|
| DIN EN 60317-24-1996
| 特定型号绕组线的规范.第24部分:聚酰胺涂层的聚酯或聚酯亚胺漆包圆铝线,180级
| Specifications for particular types of winding wires - Part 24: Polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180 (IEC 60317-24:1990); German version EN 60317-24:1995
|
| DIN EN 60317-25-1997
| 特定型号绕组线的规范.第25部分:聚酰胺-酰亚胺酯涂层的聚亚酰胺酯漆包圆铝线,200级
| Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 (IEC 60317-25:1990); German version EN 60317-25:1996
|
| DIN EN 60317-29-1997
| 特定型号绕组线的规范.第29部分:聚酰胺-酰亚胺涂层的聚酯或聚酰胺酯漆包扁铜线,200级
| Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 (IEC 60317-29:1990); German version EN 60317-29:1996
|
| DIN EN 60603-6-1998
| 频率 3 MHZ以下印制电路插接件.第6部分:额定厚度为1,6mm(0,063 in)触点间距2,54mm(0,1 in)单面或双面涂层印
| Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness (IEC 60603-6:1987); German version EN 60603-6:1998
|
| DIN EN 60664-3-2003
| 低压系统内设备的绝缘配合.第3部分:防污染用涂层、罐封或模塑件的使用
| Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60664-3:2003); German version EN 60664-3:2003
|
| DIN EN 60684-3-300-2003
| 绝缘软管.第3部分:各型软管规范.300节:无涂层玻璃纤维编织软管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002); German version EN 60684-3-300:2002
|
| DIN EN 60684-3-343 bis 345-2003
| 绝缘软管.第3部分:各型软管规范.343至345节:无涂层可扩张乙烯三氟氯乙烯纤维编织软管
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002
|
| DIN EN 60684-3-400 bis 402-2003
| 绝缘软管.第3部分:各型软管规范.400至402节:带硅弹性涂层的玻璃纤维软管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002); German version EN 60684-3-400 bis 402:2002
|
| DIN EN 60684-3-406 bis 408-2004
| 绝缘软管.第3部分:各种型号软管规范.活页406-408:带PVC涂层的玻璃纤维编织软管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 bis 408:2003); German version EN 60684-3-406 bis 408:2003
|
| DIN EN 60684-3-409-2000
| 绝缘软套管.第3部分:套管专用型规范.活页409:带聚氨酯基涂层的玻璃织物套管 (IEC 60684-3-409:1999); 德文
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating (IEC 60684-3-409:1999); German version EN 60684-3-409:1999
|
| DIN EN 60793-1-32-2004
| 光纤.第1-32部分:测量方法和试验过程.涂层的可剥离性
| Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability (IEC 60793-1-32:2001, modified); German version EN 60793-1-32:2003
|
| DIN EN 61249-5-1-1996
| 连接结构材料.第5部分:带和不带涂层的导电箔和薄膜分规范.第1节:铜箔(用于生产覆铜基材)
| Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings; section 1: Copper foils (for the manufacturer of copper-clad base materials) (IEC 61249-5-1:1995); German version EN 61249-5-1:1996
|
| DIN EN 61249-5-4-1997
| 连接结构材料.第5部分:带或不带涂层的导电箔和薄膜分规范.第4节:导电油墨
| Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings; section 4: Conductive inks (IEC 61249-5-4:1996); German version EN 61249-5-4:1996
|
| DIN EN 61249-8-7-1997
| 连接结构材料.第8部分:非导电薄膜和涂层用分规范.第7节:打印油墨
| Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings; section 7: Marking legend inks (IEC 61249-8-7:1996); German version EN 61249-8-7:1996
|
| DIN EN 61249-8-8-1998
| 互连结构用材料.第8部分:非导电薄膜和涂层分规范集.第8节:非永久性聚合物涂层
| Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings; Section 8: Temporary polymer coatings (IEC 61249-8-8:1997); German version EN 61249-8-8:1997
|
| DIN EN 868-7-1999
| 计划进行消毒医疗装置的包装材料和包装系统.第7部分:用环氧乙烷或射线方法进行消毒时使用的可热密封的医药
| Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation; requirements and test methods; German version EN 868-7:1999
|
| DIN EN 927-1-1996
| 漆和涂料.外部用木材的涂料和涂层系统.第1部分:分类和选用
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection; German version EN 927-1:1996
|
| DIN EN 927-2-2006
| 涂料和清漆.室外木料涂料和涂层系统.第2部分:性能规范
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification; English version of DIN EN 927-2:2006-07
|
| DIN EN 927-3-2007
| 涂料和清漆.室外木料涂层和涂层系统.第3部分:自然风蚀试验
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test; English version of DIN EN 927-3:2007-03
|
| DIN EN 927-5-2007
| 涂料和清漆.室外木料涂层和涂层系统.第5部分:液态水渗透性评定
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability; English version of DIN EN 927-5:2007-03
|
| DIN EN ISO 10111-2002
| 金属和其它无机涂层.单位面积质量的测量.重量测定法和化学分析法述评(ISO 10111:2000); 德文版本 EN ISO 10
| Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2000); German version EN ISO 10111:2001)
|
| DIN EN ISO 105-X10-1995
| 纺织品.色牢度试验.第X010部分:织物颜色向聚氯乙烯涂层迁移的评定
| Textiles - Tests for colour fastness - Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings (ISO 105-X10:1993); German version EN ISO 105-X10:1995
|
| DIN EN ISO 10684-2004
| 紧固件.热浸镀锌涂层
| Fasteners - Hot dip galvanized coatings (ISO 10684:2004); German version EN ISO 10684:2004
|
| DIN EN ISO 11507-2007
| 涂料和清漆.涂层暴露于人工风蚀.暴露于荧光紫外灯和水
| Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007); English version of DIN EN ISO 11507:2007-05
|
| DIN EN ISO 11644-2004
| 皮革.涂层粘着牢度测定方法
| Leather - Test for adhesion of finish (ISO 11644:1993); German version EN ISO 11644:2003
|
| DIN EN ISO 11998-2006
| 涂料和清漆.涂层耐湿洗和清洁度测定(ISO 11998-2006)
| Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006); English version of DIN EN ISO 11998:2006-10
|
| DIN EN ISO 12683-2005
| 机械镀锌涂层.规范和试验方法
| Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004); German version EN ISO 12683:2004
|
| DIN EN ISO 12687-1998
| 金属涂层.孔隙率试验.湿硫硫磺(硫华)试验
| Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test (ISO 12687:1996); German version EN ISO 12687:1998
|
| DIN EN ISO 12944-7-1998
| 涂料和清漆.用防护涂料系统对钢结构件进行的防腐蚀保护.第7部分:涂层工作的实施和监督
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998); German version EN ISO 12944-7:1998
|
| DIN EN ISO 1421-1998
| 橡胶和塑料涂层的织物.抗拉强度和延伸率的测定
| Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:1998); German version EN ISO 1421:1998
|
| DIN EN ISO 1460-1995
| 金属镀层.钢铁材料的热浸镀锌涂层.用重量测定法测定单位面积重量 (ISO 1460:1992); 德文版本 EN ISO 1460:1
| Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992); German version EN ISO 1460:1994
|
| DIN EN ISO 14713-1999
| 铁和钢结构件的防腐.锌和铝涂层.指南
| Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines (ISO 14713:1999); German version EN ISO 14713:1999
|
| DIN EN ISO 15720-2001
| 金属涂层.孔隙率试验.胶材料电版术法测定金属底材上金或钯涂层的孔隙率
| Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001); German version EN ISO 15720:2001
|
| DIN EN ISO 15721-2001
| 金属涂层.孔隙率试验.用亚硫酸和二氧化硫蒸气测定金或钯涂层的孔隙率
| Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001); German version EN ISO 15721:2001
|
| DIN EN ISO 16276-1-2007
| 防护涂料系统对钢结构的腐蚀防护.涂层粘附/粘聚(断裂强度)的评定和验收标准.第1部分:脱落测试(ISO 16276-1-
| Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007); German version EN ISO 16276-1:2007
|
| DIN EN ISO 16276-2-2007
| 防护涂料系统对钢结构的腐蚀防护.涂层粘附/粘聚(断裂强度)的评定和验收标准.第2部分:划格测试和X切割测试(I
| Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007); German version EN ISO 16276-2:2007
|
| DIN EN ISO 17233-2003
| 皮革.物理和机械试验.表面涂层冷裂温度的测定
| Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002); German version EN ISO 17233:2002
|
| DIN EN ISO 17834-2004
| 热喷镀.防高温腐蚀和氧化的涂层
| Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003
|
| DIN EN ISO 17872-2007
| 涂料和清漆.腐蚀测试用金属板涂层上划线标志的入门指南
| Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007); German version EN ISO 17872:2007
|
| DIN EN ISO 20566-2007
| 涂料和清漆.用实验室洗车台测定涂层系统耐划痕性
| Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash (ISO 20566:2005); English version of DIN EN ISO 20566:2006-01
|
| DIN EN ISO 20567-1-2007
| 涂料和清漆.涂层的耐石片划痕的测定.第1部分:多冲击试验(ISO 20567-1-2005)
| Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2005); English version of DIN EN ISO 20567-1:2007-04
|
| DIN EN ISO 20567-2-2007
| 涂料和清漆.涂层的耐石片划痕的测定.第2部分:带导向冲击体单冲击试验(ISO 20567-2-2005)
| Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2005); English version of DIN EN ISO 20567-2:2007-01
|
| DIN EN ISO 2063-2005
| 热喷涂.金属和其他无机涂层.锌、铝及其合金
| Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005); German version EN ISO 2063:2005
|
| DIN EN ISO 21227-3-2007
| 涂料和清漆.用光学成像评估涂层表面缺陷.第3部分:划痕周围剥离和腐蚀的评估
| Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007); German version EN ISO 21227-3:2007
|
| DIN EN ISO 21968-2005
| 金属和非金属基材的非磁性金属涂层.涂层厚度测量.相敏涡流法
| Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005); German version EN ISO 21968:2005
|
| DIN EN ISO 2231-1995
| 橡胶或塑料涂层织物.环境作用和检验用标准大气压 (ISO 2231:1989); 德文版本 EN ISO 2231:1995
| Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989); German version EN ISO 2231:1995
|
| DIN EN ISO 2286-1-1998
| 橡胶或塑料涂层的织物.卷织物特性的测定.第1部分:长度、宽度和净质量的测定
| Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Method for determination of the length, width and net mass (ISO 2286-1:1998); German version EN ISO 2286-1:1998
|
| DIN EN ISO 2286-2-1998
| 橡胶或塑料涂层的织物.卷织物特性的测定.第2部分:单位面积总质量、单位面积涂层质量和基布的单位面积质量的
| Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998); German version EN ISO 2286-2:1998
|
| DIN EN ISO 2286-3-1998
| 橡胶或塑料涂层的织物.卷织物特性的测定.第3部分:单位面积的整体的质量,单位面积涂层的质量和单位面积基布
| Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998
|
| DIN EN ISO 2411-2000
| 橡胶或塑料涂覆织物.涂层粘合强度的测定
| Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000); German version EN ISO 2411:2000
|
| DIN EN ISO 2810-2004
| 涂料和清漆.涂层的自然老化.暴露和评估
| Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004); German version EN ISO 2810:2004
|
| DIN EN ISO 3543-2001
| 金属和非金属涂层.镀层厚度测量.β射线反向散射法
| Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000); German version EN ISO 3543:2000
|
| DIN EN ISO 3868-1995
| 金属镀层和其它无机物涂层.涂层厚度测量.菲索(Fizeau)多光束干涉测量法 (ISO 3868:1976); 德文版本 EN ISO
| Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976); German version EN ISO 3868:1994
|
| DIN EN ISO 3892-2001
| 金属材料转化涂层.单位面积涂层质量测定.称重法
| Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001
|
| DIN EN ISO 4536-1995
| 金属基质的金属和无机物涂层.盐液滴腐蚀试验(SD 试验) (ISO 4536:1985); 德文版本 EN ISO 4536:1995
| Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) (ISO 4536:1985); German version EN ISO 4536:1995
|
| DIN EN ISO 4541-1995
| 金属镀层和其它无机物涂层.柯洛科特(Corrodkote)耐腐蚀试验(CORR 试验) (ISO 4541:1978); 德文版本 EN ISO
| Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978); German version EN ISO 4541:1994
|
| DIN EN ISO 4543-1995
| 金属镀层和其它无机物涂层.储存条件的一般规则 (ISO 4543:1981); 德文版本 EN ISO 4543:1994
| Metallic and other non-organic coatings - General rules for storage conditions (ISO 4543:1981); German version EN ISO 4543:1994
|
| DIN EN ISO 4628-6-2007
| 涂料和清漆.涂层降解的评估.缺陷的数量和大小及外表一致变化饱和度的标识.第6部分:用粘胶带法评估粉化等级
| Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2007); German version EN ISO 4628-6:2007
|
| DIN EN ISO 4674-2-1998
| 橡胶或塑料涂层的织物.抗撕裂强度的测定.第2部分:冲击摆试验法
| Rubber or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998); German version EN ISO 4674-2:1998
|
| DIN EN ISO 5470-2-2003
| 橡胶或塑料涂层织物.耐磨性测定.第2部分:马丁代尔研磨器
| Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003); German version EN ISO 5470-2:2003
|
| DIN EN ISO 6158-2004
| 金属涂层.工程用铬电镀层
| Metallic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2004); German version EN ISO 6158:2004
|
| DIN EN ISO 6179-2001
| 硫化或热塑橡胶.橡胶薄板和橡胶涂层织物.挥发性液体渗透速度测定(重力测定技术)
| Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:1998); German version EN ISO 6179:2000
|
| DIN EN ISO 6988-1997
| 金属涂层和其它无机物涂层.普通水分冷凝二氧化硫试验
| Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985); German version EN ISO 6988:1994
|
| DIN EN ISO 7854-1997
| 橡胶或塑料涂层织物.抗折曲损坏性测定
| Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995); German version EN ISO 7854:1997
|
| DIN EN ISO 8130-9-1999
| 涂层粉.第9部分:取样
| Coating powders - Part 9: Sampling (ISO 8130-9:1992); German version EN ISO 8130-9:1999
|
| DIN EN ISO 8502-4-1999
| 使用涂层材料前钢基材表面清理准备.表面清洁度评定检验.第4部分:涂层前凝露概率估算指南
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993); German version EN ISO 8502-4:1999
|
| DIN EN ISO 8980-4-2006
| 眼科光学.未切边成品眼镜片.第4部分:防反射涂层的试验方法和规范(ISO 8980-4-2006)
| Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings (ISO 8980-4:2006); English version of DIN EN ISO 8980-4:2006-11
|
| DIN IEC 60404-12-1999
| 磁性材料.第12部分:层间绝缘涂层的温度稳定性的评定方法指南
| Magnetic materials - Part 12: Guide to methods of assessment of temperature capability of interlaminar insulation coatings (IEC 60404-12:1992)
|
| DIN ISO 6344-2-2000
| 涂层磨料.粒度分析.第2部分:肉眼可见磨料为P12至P220的粒度分布测定
| Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P 12 to P 220 (ISO 6344-2:1998)
|
| DIN ISO 9211-1-2001
| 光学和光学仪器.光学涂层.第1部分:定义(ISO 9211-1:1994)
| Optics and optical instruments - Optical coatings - Part 1: Definitions (ISO 9211-1:1994)
|
| DIN ISO 9211-2-2001
| 光学和光学仪器.光学涂层.第2部分:光学特性 (ISO 9211-2:1994)
| Optics and optical instruments - Optical coatings - Part 2: Optical properties (ISO 9211-2:1994)
|
| DIN ISO 9211-3-2001
| 光学和光学仪器.光学涂层.第3部分:环境稳定性
| Optics and optical instruments - Optical coatings - Part 3: Environmental durability (ISO 9211-3:1994)
|
| DIN V ENV 1071-5-1995
| 高技术陶瓷.陶瓷涂层的试验方法.第5部分:孔隙度测定; 德文版本 ENV 1071-5:1995
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 5: Determination of porosity; German version ENV 1071-5:1995
|
| DIN V VDE V 0341-9005-2007
| 绝缘软套管.第9005部分:热收缩元件.无内涂层套管的详细规范
| Flexible insulating sleeving - Part 9005: Heat shrinkable components - Sleevings without inner coating, detail specification
|
| DIN V VDE V 0341-9012-2007
| 绝缘软套管.第9012部分:热收缩元件.有内涂层套管的详细规范
| Flexible insulating sleeving - Part 9012: Heat shrinkable components - Sleevings with inner coating, detail specification
|
| DIN-Fachbericht 28-2002
| 采用保护漆系统对钢结构作腐蚀保护.不能目视检测污染物涂层材料表面的用前试验
| Corrosion protection of steel structures by protective paint systems - Testing of surfaces before application of coating materials for containments that cannot be detected visually
|
| 编号 | 中文名称 | 英文名称 |
|---|