| 编号 | 中文名称 | 英文名称 |
|---|
| NF A03-702-1962
| 钢铁产品.线材试验.铁丝和钢丝的锡涂层试验
| (IRON AND STEEL PRODUCTS. TESTING OF TIN COATINGS ON IRON AND STEEL THREAD.)
|
| NF A05-102-1995
| 金属基质上的金属和无机物涂层.盐液滴腐蚀试验(SD试验)(欧洲标准EN ISO 4536)
| (Metallic and non-organic coatings on metallic substrates. Saline droplets corrosion test (SD test).)
|
| NF A05-104-1995
| 金属和其它无机物涂层.涂膏密室耐腐蚀试验(CORR试验)
| (Metallic and other non-organic coatings. Corrodkote corrosion test (CORR test).)
|
| NF A05-105-1995
| 金属镀层和其它无机物涂层.适用于储存情况的腐蚀试验一般规则
| (Metallic and other non-organic coatings. General rules for corrosion tests applicable for storage conditions.)
|
| NF A05-106-1995
| 金属涂层和其它无机物涂层.在一般水分冷凝作用下的二氧化硫试验
| (Metallic and other non-organic coatings. Sulfur dioxide test with general condensation of moisture.)
|
| NF A05-677-1999
| 阴极保护.用于与阴极保护相接的埋没的或浸入的钢管防腐作用的外有机涂层.带和可缩材料(欧洲标准EN12068)
| (Cathodic protection. External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection. Tapes and shrinkable materials.)
|
| NF A36-142-2002
| 冷轧锡产品.电解锡板和电解铬/氧化铬涂层钢
| (Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel.)
|
| NF A37-602-1-2001
| 钢丝和丝产品.钢丝上的非有色金属涂层.第1部分:一般原理
| (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1 : general principles.)
|
| NF A37-602-2-2001
| 钢丝和丝产品.钢丝上的非有色金属涂层.第2部分:锌或锌合金涂层
| (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2 : zinc or zinc alloy coatings.)
|
| NF A37-602-3-2001
| 钢丝和丝产品.钢丝上的非有色金属涂层.第3部分:铝涂层
| (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3 : aluminium coatings.)
|
| NF A37-602-4-2001
| 钢丝和丝产品.钢丝上的非有色金属涂层.第4部分:锡涂层
| (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4 : Tin coatings.)
|
| NF A37-602-5-2001
| 钢丝和丝产品.钢丝上的非有色金属涂层.第5部分:镍涂层
| (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5 : nickel coatings.)
|
| NF A37-602-6-2001
| 钢丝和丝产品.钢丝上的非有色金属涂层.第6部分:铜、青铜或黄铜涂层
| (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6 : copper, bronze or brass coatings.)
|
| NF A37-603-1-2001
| 钢丝和丝产品.钢丝上的有机涂层.第1部分:一般规则
| (Steel wire and wire products - Organic coatings on steel wire - Part 1 : general rules.)
|
| NF A37-603-2-2001
| 钢丝和丝产品.钢丝上的有机涂层.第2部分:PVC精制丝线
| (Steel wire and wire products - Organic coatings on steel wire - Part 2 : PVC finished wire.)
|
| NF A37-603-3-2001
| 钢丝和丝产品.钢丝上的有机涂层.第3部分:PE涂覆钢丝
| (Steel wire and wire products - Organic coatings on steel wire - Part 3 : PE coated wire.)
|
| NF A37-603-4-2003
| 钢丝和钢丝产品.钢丝上的有机涂层.第4部分:聚酯涂覆丝
| (Steel wire and wire products - Organic coatings on steel wire - Part 4 : polyester coated wire.)
|
| NF A48-851-1985
| 铸造产品.压力管道用球墨铸铁管.聚氨酯涂层
| (FOUNDRY PRODUCTS. DUCTILE IRON PIPES FOR PRESSURE PIPELINES. POLYURETHAN EXTERNAL COATING.)
|
| NF A49-702-1980
| 钢管.热涂沥青粘合剂地基的内外涂层
| (STEEL TUBES. EXTERNAL AND INTERNAL HOT-DIP COATINGS BASED ON HYDROCARBON-BEARING BONDING AGENTS.)
|
| NF A49-705-1982
| 钢管.聚乙烯外涂层.粉末烧结应用
| (STEEL TUBES. EXTERNAL POLYETHYLENE COATING. APPLICATION BY POWDER SINTERING.)
|
| NF A49-706-1988
| 钢管.环氧树脂外涂层.应用.检验和试验
| (STEEL TUBES. EPOXY RESIN POWDER EXTERNAL COATING. APPLICATION. INSPECTION AND TEST.)
|
| NF A49-708-1-2002
| 近岸和海上管线用钢管和配件.环氧树脂及环氧树脂改良外涂层
| (Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings.)
|
| NF A49-708-2-2002
| 近岸和海上管线用钢管和配件.聚亚氨酯及聚亚氨酯改良外涂层
| (Steel tubes and fittings for on and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings.)
|
| NF A49-711-1992
| 钢管.带三层聚丙烯涂层的外包履层.用挤压法涂施
| (STEEL TUBES. EXTERNAL COATING WITH THREE POLYPROPYLENE LAYERS COATING. APPLICATION BY EXTRUSION.)
|
| NF A49-712-1993
| 钢管.带二层环氧树脂聚丙烯涂层的外包履层.用挤压法涂施
| (STEEL TUBES. EXTERNAL COATING WITH TWO RESIN EPOXY-POLYPROPYLENE LAYER COATING. APPLICATION BY EXTRUSION.)
|
| NF A49-713-1993
| 钢管.带有环氧树脂及聚酰胺基涂层的外部和/或内部双层覆层
| (STEEL TUBES. EXTERNAL AND/OR INTERNAL TWO LAYERS COATING WITH EPOXY RESIN AND POLYAMIDE BASED COATING.)
|
| NF A49-714-1997
| 钢管.带有酚醛树脂或环氧树脂及聚酰胺基涂层的内部双层覆层
| (STEEL TUBES. INTERNAL TWO LAYERS COATING WITH PHENOL RESIN OR EPOXY RESIN AND POLYAMIDE BASED COATING.)
|
| NF A49-719-1998
| 钢管用内部和/或外部防护涂层.用于自动装置的热浸镀锌涂层规范
| (INTERNAL AND/OR EXTERNAL PROTECTIVE COATINGS FOR STEEL TUBES. SPECIFICATION FOR HOT DIP GALVANIZED COATINGS APPLIED IN AUTOMATIC PLANTS. (EUROPEAN STANDARD EN 10240).)
|
| NF A50-110-15-2003
| 铝和铝合金.废料.第15部分:去除涂层的旧铝包装件废料
| (Aluminium and aluminium alloys - Scrap - Part 15 : decoated aluminium scrap from post-consumer aluminium packagings.)
|
| NF A50-432-1997
| 铝和铝合金.通用盘绕涂层的薄板和带材.规范
| (ALUMINIUM AND ALUMINIUM ALLOYS. COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS. SPECIFICATIONS. (EUROPEAN STANDARD EN 1396).)
|
| NF A91-050-1998
| 金属防腐蚀.电镀涂层.确定一般规范的方法
| (CORROSION PROTECTION OF METALS. ELECTRODEPOSITED COATINGS. METHOD OF SPECIFYING GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 1403).)
|
| NF A91-052-2000
| 金属防腐蚀.铁或钢上辅助处理的锌电镀涂层
| (Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel.)
|
| NF A91-053-2000
| 金属防腐蚀.铁或钢上的镉电镀涂层
| (Corrosion protection of metals - Electrodeposited coatings of cadmium on iron or steel.)
|
| NF A91-109-1995
| 金属和其他无机物涂层.厚度测量方法述评
| (Metallic and other non-organic coatings. Review of methods of measurement of thickness.)
|
| NF A91-117-1995
| 金属和其他无机物涂层.涂层厚度的测量.菲索(Fizeau)多光束干涉仪法
| (Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method.)
|
| NF A91-123-1995
| 金属镀层.铁类材料的热浸镀锌涂层.用重量测定法测定单位面积重量
| (METALLIC COATINGS. HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS. GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA. (EUROPEAN STANDARD EN ISO 1460).)
|
| NF A91-149-2001
| 金属镀层.孔隙试验.电图记录金属基质上金和钯涂层的孔隙度
| (Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.)
|
| NF A91-150-2001
| 金属镀层.孔隙试验.通过亚硫酸和二氧化硫蒸气的金和钯涂层的孔隙度
| (Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour.)
|
| NF A91-211-1994
| 热喷涂层的试验.胶粘剂抗拉强度的测定
| (THERMAL SPRAYING. DETERMINATION OF TENSILE ADHESIVE STRENGTH. (EUROPEAN STANDARD EN 582).)
|
| NF A91-215-2002
| 热喷涂.工程元件用热喷镀涂层的应用程序
| (Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components.)
|
| NF A91-225-2004
| 热喷涂.高温下防腐蚀和氧化涂层
| (Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures.)
|
| NF A91-455-11-2000
| 铝和铝合金.阳极化.第11部分:在20度、45度、60度或85度时测定阳极氧化物涂层的镜面反射和镜面毛重
| (Aluminium and aluminium alloys - Anodizing - Part 11 : measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 o, 45 o, 60 o or 85 o.)
|
| NF A91-455-14-2000
| 铝和铝合金.阳极化.第14部分:用肉眼确定阳极氧化物涂层的图像清晰度.图表比例尺法
| (Aluminium and aluminium alloys - Anodizing - Part 14 : visual determination of image clarity of anodic oxidation coatings - Chart scale method.)
|
| NF A91-455-15-2000
| 铝和铝合金.阳极化.第15部分:阳极氧化物涂层抗变形断裂的测定
| (Aluminium and aluminium alloys - Anodizing - Part 15 : assessment of resistance of anodic oxidation coatings to cracking by deformation.)
|
| NF A91-460-2003
| 镀粉扩散渗镀.铁制品上的锌扩散涂层.规范
| (Sherardizing - Zinc diffusion coatings on ferrous products - Specification.)
|
| NF A91-461-2004
| 金属的防腐蚀.铁或钢元件上的非电解镀锌薄涂层
| (Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components.)
|
| NF A91-473-2001
| 锌、镉、铝锌合金和锌铝合金的铬酸盐转化涂层.试验方法
| (Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods.)
|
| NF A91-474-2001
| 金属材料上的转化涂层.单位面积涂层质量的测定.重量分析法
| (Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods.)
|
| NF A91-475-2000
| 金属的磷酸盐转化涂层.规定要求的方法
| (Phosphate conversion coatings of metals - Method of specifying requirements.)
|
| NF A91-477-2000
| 金属的防腐蚀.经清洗和没有清洗的铝及铝合金上的铬酸盐转化涂层
| (Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys.)
|
| NF A91-501-1991
| 金属用磷盐转化涂层.技术规定
| (Phosphate conversion coatings for metals. Method of specifying requirements.)
|
| NF A92-020-1990
| 铝和铝合金用的搪瓷涂层.试样的制备
| (VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM AND ALUMINIUM ALLOYS. PREPARATION OF TEST SAMPLES.)
|
| NF A92-021-1990
| 铝和铝合金用的搪瓷涂层.附着力试验
| (VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM AND ALUMINIUM LLOYS. ADHESION TESTS.)
|
| NF A92-112-1989
| 搪瓷上釉涂层的制品.耐热性能的测定
| (VITREOUS AND PORCELAIN ENAMELLED MANUFACTURED ARTICLES. DETERMINATION OF RESISTANCE TO HEAT.)
|
| NF A92-119-2001
| 釉瓷和搪瓷.搪瓷涂层耐划痕性的测定
| (Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes.)
|
| NF C26-963-1-1995
| 加感印制电路板用涂覆层(保形敷层).第3部分:专用材料规范.活页1:通用(I类)和高可靠性(II类)涂层
| (Coatings for loaded printed wire boards (conformal coatings). Part 3 : specifications for individual materials. Sheet 1 : coatings for general purpose (class i) and for high reliability (class ii).)
|
| NF C31-672/A1-2001
| 特种绕组线规范.第22部分:聚酰胺涂层的180级聚酯或聚酯亚胺漆包圆铜线
| (Specifications for particular types of winding wires - Part 22 : polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180.)
|
| NF C31-674/A1-2001
| 特种绕组线规范.第24部分:聚酰胺涂层的180级聚酯或聚酯亚胺漆包圆铝线
| (Specifications for particular types of winding wires - Part 24 : polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180.)
|
| NF C93-643-300-2003
| 绝缘软管.第3部分:各种型号软管规范.第300篇:无涂层的玻璃纤维编织软管
| (Flexible insulating sleeving - Part 3 : specification requirements for individual types of sleeving - Sheet 300 : glass textile fibre sleeving, braided, uncoated.)
|
| NF C93-643-400-2003
| 绝缘软管.第3部分:各种型号软管的规范要求.第400至402篇:带有机硅橡胶涂层的玻璃纤维织物软管
| (Flexible insulating sleeving - Part 3 : specification requirements for individual types of sleeving - Sheets 400 to 402 : glass textile sleeving with silicone elastomer coating.)
|
| NF C93-643-406-1993
| 挠性绝缘套管规范.第3部分:专用套管规范要求.活页403到405:具有聚丙烯基涂层的玻璃织物套管
| (Specification for flexible insulating sleeving. Part 3 : specification requirements for individual types of sleeving. Sheets 406 to 408 : glass textile sleeving with PVC based coating.)
|
| NF C93-747-1997
| 互连结构用材料.第8部分:不导电膜和涂层的分规范组.第7节:标记图例链路
| (Materials for interconnection structures. Part 8 : sectional specification set for non conductive films and coatings. Section 7 : marking legend links.)
|
| NF C93-748-1998
| 互联结构材料.第8部分:非导体膜和涂层装置分规范.第8节:暂时性聚合物涂层
| (Materials for interconnection structures. Part 8 : sectional specification set for non-conductive films and coatings. Section 8 : temporary polymer coatings.)
|
| NF C93-781-1996
| 连接结构用材料.第5部分:带和不带涂层的导电箔和薄膜的分规范.第1节:铜箔(用于生产铜涂覆基材)
| (Materials for interconnection structures. Part 5 : sectional specification set for conductive foils and films with and without coatings. Section 1 : copper foils (for the manufacture of copper-clad base materials).)
|
| NF E75-082-1976
| 涂层研磨件.带凸缘的小叶轮.名称.尺寸
| (COATED ABRASIVES. FLAP WHEELS WITH INCORPORATE FLANGES OR SEPARATE FLANGES. DESIGNATION. DIMENSIONS.)
|
| NF E86-900-1981
| 钢贮槽.防腐涂层.最低技术规范
| (STEEL STORAGE TANKS. ANTICORROSIVE COATING. MINIMUM TECHNICAL REQUIREMENTS.)
|
| NF E86-901-1981
| 钢贮槽.防腐涂层.电压２５００v时检验缺陷的监测器
| (STEEL STORAGE TANKS-ANTICORROSIVE COATING- DEFECT DETECTION BY 2500 CONTROLLER.)
|
| NF F00-201-1993
| 铁路材料梗概.防装饰被损坏.防美观被破坏涂层的防刀刃划破的试验方法
| (RAILWAY MATERIAL IN GENERAL. ANTIVANDALISM PROTECTION. TEST METHOD OF LACERATION RESISTANCE, WITH A BLADE, OF VANDAL-PROOF COVERING.)
|
| NF F19-295-1997
| 铁路车辆.高固态单涂层清漆
| (RAILWAY ROLLING STOCK. HIGH SOLID MONOCOAT PAINT.)
|
| NF F19-350-1998
| 铁路滚动存货车.线圈涂层板铝和铝合金
| (RAILWAY ROLLING STOCK. COIL COATED SHEETS ALUMINIUM AND ALUMINIUM ALLOYS.)
|
| NF G07-019-10-1996
| 纺织品.色牢度试验.第X010部分:织物颜色向聚乙烯涂层迁移的评定
| (Textiles. Tests for colour fastness. Part X10 : assessment of migration of textile colours into polyvinyl chloride coatings.)
|
| NF G37-001-2003
| 橡胶或塑料涂层织物.术语
| (Rubber- or plastics-coated fabrics - Terminology.)
|
| NF G37-102-1-1998
| 橡胶或塑料涂层织物. 卷曲特性的测定.第1部分:长度,宽度和净质量的测定(欧洲标准 EN ISO 2286-1)
| (Rubber- or plastics-coated fabrics. Determination of roll characteristics. Part 1 : methods for determination of length, width and net mass.)
|
| NF G37-102-2-1998
| 橡胶或塑料涂层织物.卷曲特性的测定. 第2部分:每单位面积的总质量的测定方法.包被每单位面积质量和底层每单
| (Rubber- or plastics-coated fabrics. Determination of roll characteristics. Part 2 : methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate.)
|
| NF G37-102-3-1998
| 橡胶或塑料涂层织物.卷曲特性的测定. 第3部分:厚度的测定方法( 欧洲标准 EN ISO 2286-3)
| (Rubber- or plastics-coated fabrics. Determination of roll characteristics. Part 3 : method for determination of thickness.)
|
| NF G37-103-1998
| 橡胶或塑料涂层织物.拉伸强度和断裂伸长的测定
| (Rubber- or plastics-coated fabrics. Determination of tensile strength and elongation at break.)
|
| NF G37-105-2-2003
| 橡胶和塑料涂层织物.加速老化试验.第2部分:光和风化作用的物理老化
| (Rubber-or plastics-coated fabrics - Accelerated ageing tests - Part 2 : physical ageing : effect of light or weathering.)
|
| NF G37-105-3-2003
| 橡胶或塑料涂层织物.加速老化试验.第3部分:环境老化
| (Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3 : environnement ageing.)
|
| NF G37-106-1997
| 橡胶或塑料涂层织物.抗水渗透性测定.低压法
| (Rubber- or plastics coated fabrics. Determination of resistance to water penetration. Low pressure method.)
|
| NF G37-107-2000
| 橡胶或塑料涂层织物.涂层粘附的测定
| (Rubber- or plastics-coated fabrics - Determination of coating adhesion.)
|
| NF G37-111-1-1998
| 橡胶或塑料涂层织物.拉伸强度和断裂伸长的测定
| (Rubber- or plastics-coated fabrics. Low temperature tests. Part 1 : bending test.)
|
| NF G37-111-2-1998
| 橡胶或塑料涂层织物.低温测试.第2部分:环圈上的冲击试验
| (Rubber- or plastics-coated fabrics. Low temperature tests. Part 2 : impact test on loop.)
|
| NF G37-112-1980
| 橡胶或塑料涂层织物.抗臭氧的静态试验
| (Fabrics coated with rubber or plastic-static ozone resistance test.)
|
| NF G37-114-1983
| 橡胶或塑料涂层织物.透气性试验
| (Fabrics coated with rubber or plastics. Gas permeability test.)
|
| NF G37-115-1988
| 橡胶或塑料涂层织物.耐静力压入穿孔强度的测定
| (FABRIC COATED WITH RUBBERS OR PLASTICS. DETERMINATION OF STATIC PERFORATION STRENGTH.)
|
| NF G37-116-1-1998
| 橡胶或塑料涂层织物.破裂强度的测定.第1部分:钢球法.(欧洲标准EN 12332-1)
| (Rubber- or plastics- coated fabrics. Determination of bursting strength. Part 1 : steel ball method.)
|
| NF G37-116-2-2003
| 橡胶或塑料涂层织物.破裂强度测定.第2部分:液压法
| (Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2 : hydraulic method.)
|
| NF G37-119-1987
| 橡胶或塑料涂层织物.破坏强度的测定
| (Rubber or plastic coated fabrics. Measurement of out-of centre.)
|
| NF G37-120-1980
| 橡胶或塑料涂层织物.抗挤压强度的测定
| (RUBBER OR PLASTICS-COATED FABRICS. DETERMINATION OF CRUSH RESISTANCE.)
|
| NF G37-121-1999
| 橡胶或塑料涂层织物.耐磨强度的测定.第1部分:TABER研磨机
| (Rubber- or plastics-coated fabrics. Determination of abrasion resistance. Part 1 : Taber abrader.)
|
| NF G37-128-1984
| 橡胶或塑料涂层织物.测力计对扯裂强度的测定
| (Plastics and rubber coated fabrics. Determination of tear resistance using a dynamometer.)
|
| NF G37-128-2-1998
| 橡胶或塑料涂层织物.抗撕裂性的测定.第2部分:弹道摆锤方法(欧洲标准 EN ISO 4674-2)
| (Rubber- or plastics-coated fabrics. Determination of tear resistance. Part 2 : ballistic pendulum method.)
|
| NF G37-128-3-1998
| 橡胶或塑料涂层织物.断裂强度测定.第3部分:梯形法
| (Rubber- or plastics-coated fabrics. Determination of tear strength. Part 3 : trapezoidal method.)
|
| NF G37-132-1988
| 橡胶或塑料涂层织物.柔软性试验.摆动方法
| (Rubber or plastics coated textile backings. Determination of the flexibility. Pendulum method.)
|
| NF G37-133-1997
| 橡胶或塑料涂层织物.耐弯曲损伤测定
| (RUBBER- OR PLASTICS-COATED FABRICS. DETERMINATION OF RESISTANCE TO DAMAGE BY FLEXING. (EUROPEAN STANDARD EN ISO 7854).)
|
| NF G37-136-2002
| 橡胶或塑料涂层织物.耐液体性能的测定
| (Rubber or plastic-coated fabrics - Determination of resistance to liquids.)
|
| NF G37-160-2002
| 硫化橡胶涂层织物.挥发性液体的蒸汽传播速度的测定(重力测重技术)
| (Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique).)
|
| NF G52-018-1976
| 皮革.皮革表面或涂层脆性的测定.回转弯曲性能试验
| (DETERMINATION OF RESISTANCE TO SURFACE CRACKING ON FOLDING-LIGHT LEATHERS.)
|
| NF G52-031-2003
| 皮革.物理和机械试验.表面涂层厚度的测定
| (Leather - Physical and mechanical tests - Determination of surface coating thickness.)
|
| NF G52-032-2003
| 皮革.物理和机械试验.表面涂层冷裂温度的测定
| (Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings.)
|
| NF G52-300-1976
| 皮革.印染皮革和涂层牢度的试验.白色皮革耐紫外线照射牢度的测定
| (DETERMINATION OF THE RESISTANCE OF WHITE LEATHERS TO EXPOSURE TO ULTRA-VIOLET LIGHT.)
|
| NF G52-302-1976
| 皮革.印染牢度和涂层牢度的试验.耐人工照明（氙弧灯）牢度的测定
| (DETERMINATION OF COLOUR FASTNESS OF LEATHER TO LIGHT:XENON LAMP.)
|
| NF J17-505-1982
| 船用涂料.金属面涂层厚度的无损伤测量.操作条件
| (SHIPBUILDING. MARINE PAINTS. NON-DESTRUCTIVE ON-SITE MEASUREMENT OF THE THICKNESS OF COATINGS ON A METAL SUBSTRATE. REQUIREMENTS.)
|
| NF L06-351-1995
| 航空和航天工业.热喷镀涂层.涂层质量
| (AEROSPACE INDUSTRY. COATINGS THROUGH THERMAL SPRAYING. QUALITY OF COATINGS.)
|
| NF L10-111-1995
| 航空航天系列.经过喷丸硬化的金属涂层的粘结试验
| (AEROSPACE SERIES. ADHESION TEST FOR METALLIC COATINGS BY SHOT PEENING. (EUROPEAN STANDARD EN 2829).)
|
| NF L10-200-1995
| 航空和航天.最大厚度10千分尺的金属衬底表面用不带有粘结材料或填料的干式氟碳润滑剂.涂层配件的质量
| (AEROSPACE SERIES. LUBRICATING DRY FLUOROCARBONATED WITHOUT BINDING MATERIAL OR FILLER, MAXIMUM THICKNESS OF 10 MICROMETER ON METALLIC SUBSTRATE. QUALITY OF COATED PARTS.)
|
| NF L17-956-1995
| 航空工业.飞机结构纤维用合成纤维.在交货条件下通过纤维的拉伸试验测定在折断状态下的负荷和拉伸率及无涂层
| (Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the load and elongation at rupture by tensile testing of cloths in delivery condition and of free coated cloths.)
|
| NF L36-225-1996
| 航空和航天.带关节轴承和自润滑涂层的吊环端头.交货技术条件
| (AEROSPACE SERIES. ROD ENDS WITH SELF-LUBRICATING SELF-ALIGNING BEARINGS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2068).)
|
| NF L54-002-078-2002
| 航空航天系列.电气及光学连接元件.试验方法.第508部分:触点涂层厚度的测量
| (Aerospace series - Elements of electrical and optical connection - Test methods - Part 508 : measurement of thickness of coating on contacts.)
|
| NF L54-002-079-2002
| 航空航天系列.电气及光学连接元件.试验方法.第509部分:触点涂层的粘附性
| (Aerospace series - Elements of electrical and optical connection - Test methods - Part 509 : adhesion of coating on contacts.)
|
| NF L90-272-2002
| 航天产品保证.用压敏带测量涂层的剥离和撕开强度
| (Space product assurance - Measurement of the peel and pull-off strenght of coatings and finishes using pressure sensitive tapes.)
|
| NF P12-613-2002
| 圬工用的辅助构件的试验方法.第13部分:有机涂层耐冲击性、耐磨性及耐腐蚀性的测定
| (Methods of test for ancillary components for masonry - Part 13 : determination of resistance to impact, abrasion and corrosion of organic coatings.)
|
| NF P61-203-2003
| DTU 26.2和DTU 52.1的通用部分.抹灰准条或样板、平板和瓷砖下绝缘内涂层的镀涂.技术规范
| (Part common to DTU 26.2 and DTU 52.1 - Installation of insulating undercoats under floating screed or plates, slab and under tiles - Technical specifications.)
|
| NF P75-427-2003
| 建筑设施用隔热产品.隔热材料的基底涂层和粘合剂的粘附拉伸强度测定
| (Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material.)
|
| NF P78-312-2-2001
| 建筑物用玻璃.涂层玻璃.第2部分:A、B、S类涂层的要求和试验方法
| (Glass in building - Coated glass - Part 2 : requirements and test methods for class A, B and S coatings.)
|
| NF P78-312-3-2001
| 建筑物用玻璃.涂层玻璃.第3部分:C、D类涂层的要求和试验方法
| (Glass in building - Coated glass - Part 3 : requirements and test methods for class C and D coatings.)
|
| NF P84-206-1-1995
| DTU 43.3.建筑工程.带有防水涂层的有槽金属板屋顶.第1部分:技术条款
| (DTU 43.3 - Building works - Grooved sheet metal roofing with waterproof coating - Part 1 : technical clauses.)
|
| NF P84-206-2-1995
| DTU 43.3.建筑工程.带有防水涂层的有槽金属板屋顶.第2部分:特殊条款
| (DTU 43.3 - Building works - Grooved sheet metal roofing with waterproof coating - Part 2 : special clauses.)
|
| NF P84-207-1-1993
| 建筑工程.带有防水涂层的承重木制板屋顶.第1部分:技术规范
| (DTU 43-4. BUILDING WORKS. ROOFS MADE OF LOAD-BEARING WOOD AND WOOD PRODUCT PANELS WITH WATERPROOF COVERINGS. PART 1 : TECHNICAL SPECIFICATIONS.)
|
| NF P84-404-1/A1-2000
| DTU 42.1.施工标准.使用聚合物基不透明涂层修理原表层.技术法规手册
| (DTU 42.1 - Work execution standard - Repair of existing facades using polymer based impermeable coatings - Part 1 : technical clauses book.)
|
| NF P84-404-2-1993
| DTU 42-1.施工标准.第404部分:聚合物级不透明涂层用的原表层的修理.第2节:特殊条款书
| (DTU 42-1. WORK EXECUTION STANDARD. REPAIR OF EXISTING FACADES USING POLYMER BASED IMPERMEABLE COATINGS. PART 2 : SPECIAL CLAUSES BOOK.)
|
| NF P84-404-3-1993
| DTU 42-1.施工标准.第404部分:聚合物级不透明涂层用的原表层的修理.第3节:结构说明书
| (DTU 42-1. WORK EXECUTION STANDARD. REPAIR OF EXISTING FACADES USING POLYMER BASED IMPERMEABLE COATINGS. PART 3 : INSTRUCTION MANUAL.)
|
| NF P98-527-1991
| 公路垂直信号装置.反光涂层.用便携式反光反射计测量反光反射系数的方法
| (ROAD TRAFFIC SIGNS. RETROREFLECTIVE COATINGS. METHOD OF MEASURING COEFFICIENT OF RETROREFLECTION USING A PORTABLE RETROREFLECTOMETER.)
|
| NF Q26-001-1977
| 纸和纸板.有涂层的印刷纸特性
| (PAPER AND BOARD. CHARACTERISTICS OF COATED PRINTING PAPERS.)
|
| NF S10-005-1995
| 光学和光学仪器.光学涂层.第1部分:定义
| (Optics and optical instruments. Optical coatings. Part 1 : definitions.)
|
| NF S10-010-1995
| 光学和光学仪器.光学涂层.第3部分:环境稳定性
| (Optics and optical instruments. Optical coatings. Part 3 : environmental durability.)
|
| NF S10-011-1995
| 光学和光学仪器.光学涂层.第2部分:光学性质
| (Optics and optical instruments. Optical coatings. Part 2 : optical properties.)
|
| NF S10-021-1996
| 光学和光学仪器.光学涂层.第4部分:特定的试验方法
| (OPTICS AND OPTICAL INSTRUMENTS. OPTICAL COATINGS. PART 4 : SPECIFIC TEST METHODS.)
|
| NF S11-426-4-2000
| 眼科光学.未切割的成品柔性焦距透镜组.第4部分:防反射涂层的规范和试验方法
| (Ophtalmic optics - Uncut finished spectacle lenses - Part 4 : specifications and test methods for anti-reflective coatings.)
|
| NF S94-072-1998
| 外科植入材料.生物医学用磷酰钙涂层张力粘附的测定
| (Materials for surgical implants. Determination of tensile adherence of phosphocalcic coatings for biomedical applications.)
|
| NF T30-018-1999
| 涂料和清漆.水蒸气渗透率的测定.第1部分:无涂层用碟法
| (Paints and varnishes. Determination of water-vapour transmission rate. Part 1 : dish method for free films.)
|
| NF T30-036-2001
| 涂料和清漆.涂层的人工风蚀.暴露于UV荧光和水
| (Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water.)
|
| NF T30-049-1985
| 涂料和清漆.外部涂层.人工老化试验
| (Paints and varnishes. Cladding paints. Accelerated ageing test.)
|
| NF T30-090-2002
| 涂料和清漆.内墙和天花板用水溶涂层材料和涂层系统.分类
| (Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification.)
|
| NF T30-101-1997
| 漆和涂层材料.标准试样板
| (Paints and varnishes. Standard panels for testing.)
|
| NF T30-121-1974
| 涂料.干涂层厚度的测定.千分尺测量法
| (PAINTS. DETERMINATION OF DRY FILM THICKNESS. MICROMETER METHOD.)
|
| NF T30-122-1974
| 涂料.干涂层厚度的测定.比较仪测量法
| (PAINTS. DETERMINATION OF DRY FILM THICKNESS. DIAL GAUGE METHOD.)
|
| NF T30-123-1974
| 涂料.干涂层厚度的测定.显微镜方法
| (PAINTS. DETERMINATION OF DRY FILM THICKNESS. MICROSCOPE METHODS.)
|
| NF T30-125-1974
| 涂料.冷涂层厚度的测定
| (PAINTS.DETERMINATION OF WET FILM THICKNESS.)
|
| NF T30-303-2001
| 涂料和清漆.涂层耐湿式洗涤和可清洗性测定
| (Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings.)
|
| NF T30-600-1977
| 涂料.室内工程涂层.实验室试验用各类涂层的制备方法
| (PAINTS. PAINT COATINGS FOR INDOOR USE. METHODS FOR PREPARING THE DIFFERENT TYPES OF COATING TO BE SUBJECTED TO LABORATORY TESTS.)
|
| NF T30-601-1977
| 涂料.室内工程涂层.用稠密度计测定浓度
| (PAINTS. PAINT COATINGS FOR INDOOR USE. MEASUREMENT OF CONSISTENCY BY PENETROMETER.)
|
| NF T30-603-1978
| 涂料.室内工程涂层.各种温度下的焙烧试验
| (PAINTS. FILLERS FOR INTERIOR USE. DIFFERENTIAL THERMAL ANALYSIS.)
|
| NF T30-604-1986
| 涂料.室内工程涂层.用净化液体筛选测定法
| (Paints. Fillers for interior use. Determination of residue on sieve using entraining liquid.)
|
| NF T30-605-1978
| 涂料.室内工程涂层.真空筛选机测定法
| (PAINTS. FILLERS FOR INTERIOR USE. SIEVE ANALYSIS USING A VACUMM SIENER.)
|
| NF T30-606-1980
| 涂料.室内工程涂层.通过测定抗撕裂强度进行附着力测定
| (Fillers for interior use. Measurement of adhesion-cohesion by a pull-off test.)
|
| NF T30-607-1980
| 涂料.室内工程涂层.常规撕裂法对附着力的测定
| (Fillers for interior use. Measurement of adhesion. Cohesion by a conventional stripping process.)
|
| NF T34-201-4-2001
| 涂料和清漆.外部木材用涂料和涂层系统.第4部分:水-蒸气渗透性的评定
| (Paints and varnishes - Coating materials and coating systems for exterior wood - Part 4 : assessment of the water-vapour permeability.)
|
| NF T34-201-5-2001
| 涂料和清漆.外部木材用涂料和涂层系统.第5部分:液态蒸气渗透性的评定
| (Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5 : assessment of the liquid vapour permeability.)
|
| NF T34-554-1-2001
| 涂料和清漆.防腐涂料系统.金属结构涂层的比色特性稳定性.第1部分:标准要求
| (Paints and varnishes - Anticorrosion paint systems - Stability in the time of the colorimetric properties of a finishing coat for a metallic structure - Part 1 : criterias of requirement.)
|
| NF T34-554-2-1998
| 涂料和清漆.防腐涂料系统.金属结构涂层的比色特性稳定性.第2部分:使用中金属结构的测量
| (PAINTS AND VARNISHES. ANTICORROSION PAINT SYSTEMS. STABILITY IN THE TIME OF THE COLORIMETRIC PROPERTIES OF A FINISHING COAT FOR A METALLIC STRUCTURE. PART 2 : MEASUREMENT ON METALLIC STRUCTURE IN USE.)
|
| NF T34-721-11-2002
| 涂料和清漆.外部砖石和混凝土用涂层材料和涂层系统.第11部分:检验前调和方法
| (Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11 : methods of conditioning before testing.)
|
| NF T34-721-3-1999
| 涂料和清漆.外部砖石和混凝土用涂层材料和系统.第3部分:液体-水透过率的测定和分类(渗透性)
| (PAINTS AND VARNISHES. COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONTRETE. PART 3 : DETERMINATION AND CLASSIFICATION OF LIQUID-WATER TRANSMISSION RATE (PERMEABILITY). (EUROPEAN STANDARD EN 1062-3).)
|
| NF T34-721-6-2002
| 涂料和清漆.外部砖石和混凝土用涂层材料和涂层系统.第6部分:二氧化碳渗透性的测定
| (Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6 : determination of carbon dioxide permeability.)
|
| NF T34-750-1-2003
| 涂料和清漆.建筑用铝及铝合金涂层.第1部分:粉末涂覆材料制涂层
| (Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : coatings prepared from powder coating materials.)
|
| NF T35-020-2003
| 液体涂层材料用喷雾和喷射设备转换效率的测定.第1部分:平板
| (Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1 : flat panels.)
|
| NF T35-505-3-1997
| 用涂层材料涂覆前钢表面的准备工作.金属喷射清洁材料的要求.第3部分:高碳铸钢喷丸及砂粒(EN ISO 11124-3)
| (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 3 : HIGH-CARBON CAST-STEEL SHOT AND GRIT. (EUROPEAN STANDARD EN ISO 11124-3).)
|
| NF T36-001-1-1996
| 色漆和清漆.涂层材料的术语和定义.第1部分:一般术语
| (PAINTS AND VARNISCHES. TERMS AND DEFINITIONS FOR COATING MATERIALS. PART 1 : GENERAL TERMS. (EUROPEAN STANDARD EN 971-1).)
|
| NF T43-113-1980
| 橡胶.球状天然橡胶.涂层定量.规范和测定
| (NATURAL RUBBER IN BALES. AMOUNT OF BALE COATING. SPECIFICATION AND DETERMINATION.)
|
| NF T47-007-1991
| 传送带.涂层特性.分类
| (CONVEYOR BELTS. CHARACTERISTICS OF COVERS. CLASSIFICATION.)
|
| NF T58-100-1971
| 塑料.金属表面涂层.干法塑料.涂层规范形式
| (PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS.(DRY APPLICATION). SPECIFICATION.)
|
| NF T58-110-1971
| 塑料.金属表面涂层.干法塑料涂层.厚度检验
| (PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS. METHODS OF THICKNESS DETERMINATION.)
|
| NF T58-112-1971
| 金属表面涂层.塑料涂层.剥离法检验附着力
| (PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS. ADHESION TEST.)
|
| NF T76-005-1998
| 粘接剂.在光线影响下粘接剂涂层的颜色变化和/或颜色的测定
| (ADHESIVE. DETERMINATION OF THE COLOUR AND/OR COLOUR CHANGES OF ADHESIVE COATS UNDER THE INFLUENCE OF LIGHT. (EUROPEAN STANDARD EN 1244).)
|
| NF T76-128-1989
| 地面挠性涂层用粘合剂.胶水的胶粘性可逆性的试验
| (ADHESIVES FOR FLEXIBLE FLOOR COVERINGS. TESTING OF ADHESIVE AND REVERSIBILITY IN WATER.)
|
| NF T76-129-1989
| 地面挠性涂层用粘合剂.使用装置的特性与牌号.开槽抹刀
| (ADHESIVES FOR FLOOR COVERINGS. CHARACTERISTICS AND DESIGNATION OF THE APPLICATION EQUIPMENT. INDEXED SPATTLES.)
|
| NF T76-500-1981
| 防水涂层纸.每平方米涂料和每平方米无水涂料的重量测定(每平方米克重)
| (Coated papers reactive to water. Determination of the mass per square metre (grammage) of the coating and the anhydrous coating.)
|
| NF T76-501-1981
| 防水涂层纸(胶粘牛皮纸-涂胶纸).粘着力的测定
| (Coated papers reactive to water (adhesive kraft paper - Gummed paper). Determination of adhesion.)
|
| NF T76-502-1981
| 防水涂层纸.贮存性能
| (Coated paper which reacts to water. Suitability for storage .)
|
| NF X31-510-1993
| 土质.土块密度的测定.石蜡涂层法
| (SOIL QUALITY. DETERMINATION OF DENSITY OF CLODS. PARAFFIN COATING METHOD.)
|
| 编号 | 中文名称 | 英文名称 |
|---|