编号 |
中文名称 |
英文名称 |
BS 1659-1950
|
铁路信号用牵引电枢直流中性线拨轨继电器和线路继电器规范
|
Specification for tractive armature direct current neutral track and line relays for railway signalling
|
BS 2G 114-1953
|
飞行器用直流电流比率指示仪规范
|
Specification for direct current ratiometer indicators for aircraft
|
BS 2G 134-1970
|
直流发电机规范
|
Specification for d.c. generators
|
BS 2G 143-1965
|
飞行器用交流和直流旋转式和直线式执行机构规范
|
Specification for a.c. and d.c. rotary and linear actuators for aircraft
|
BS 2G 146-1966
|
飞行器用直流电动机规范
|
Specification for d.c. motors for aircraft
|
BS 2G 202-1988
|
直流和低频交流用安装在机体上的电连接器的设计和性能要求规范
|
Specification for design and performance requirements for airframe-fit electrical connectors for d.c. and low frequency a.c. applications
|
BS 519-1950
|
铁路信号用牵引电枢直流中性极化线路继电器规范
|
Specification for tractive armature direct current neutral-polar line relays for railway signalling
|
BS 5424-3-1988
|
电压小于等于交流1000V及直流1200V的控制设备规范.第3部分:须经认证的连接器附加要求
|
Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. Additional requirements for contactors subject to certification
|
BS 5529-1988
|
工业用低压开关设备和控制装置规范.A型、直流用、3或4个接头的近距离电感开关
|
Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form A, for direct current, 3 or 4 terminals
|
BS 5654-1-1979
|
直流输出稳压电源.第1部分:术语定义
|
Stabilized power supplies, d.c. output - Terms and definitions
|
BS 5654-4-1979
|
直流输出稳压电源.第4部分:除射频干扰外的检验
|
Stabilized power supplies, d.c. output - Tests other than radio-frequency interference
|
BS 5683-1988
|
工业用低压开关设备和控制装置规范.C型直流用3或4引线感应式近距离开关
|
Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form C, for direct current, 3 or 4 terminals
|
BS 5684-1988
|
工业用低压开关设备和控制装置规范.D型直流用3或4引线感应式近距离开关
|
Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form D, for direct current, 3 or 4 terminals
|
BS 5704-1979
|
数字电子直流电压表与直流电子模拟-数字直流转换器性能规定方法
|
Method for specifying the performance of digital electronic d. c. voltmeters and d.c. electronic analogue-to-digital convertors
|
BS 5863-1-1984
|
过程控制系统模拟信号.第1部分:直流信号规范
|
Analogue signals for process control systems - Specification for direct current signals
|
BS 5863-2-1980
|
过程控制系统模拟信号.第2部分:直流电压信号规范
|
Analogue signals for process control systems - Specification for direct voltage signals
|
BS 6182-1-1994
|
煤矿用固有安全电源.第1部分:直流电源规范
|
Intriniscally safe power supplies for use in coal mines - Specification for d.c. power supplies
|
BS 6227-1988
|
工业用低压开关设备和控制装置规范.A型直流双引线感应式近距离开关
|
Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form A, for direct current, 2 terminals
|
BS 6328-3-1983
|
英国通信网家用线路连接设备.第3部分:直流电路连接装置规范
|
Apparatus for connection to private circuits run by certain public telecommunication operators - Specification for apparatus for connection to direct current circuits
|
BS 646-1958
|
交流和直流供电用管状熔断体(额定电流为5A及其以下)规范
|
Specification. Cartridge fuse-links (rated up to 5 amperes) for a.c. and d.c. service
|
BS 6910-2-1989
|
电压范围为交流1000V和直流1500Vd.c.的低温浇注树脂复合物和热缩电缆接头.第2部分:现场安装实用规程
|
Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation
|
BS 7194-1990
|
数字显示用直流低频电子测量仪器规范
|
Specification for direct-current and low-frequency electronic measuring instruments with a digital display
|
BS 7744-1994
|
直流电流系统用高电压绝缘子的人工污染度试验指南
|
Guide to artificial pollution tests on high voltage insulators to be used on d.c. systems
|
BS 8020-2002
|
带电作业用工具.电压交流1000V或直流1500V及以下的导电轨道系统或其附近工作时使用的绝缘手工工具
|
Tools for live working - Insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c
|
BS 9070-6-1971
|
经质量评估的固定式电容器规范.一般数据和试验方法.第6节:直流用聚碳酸酯介质电容器和聚乙烯对苯二甲酸酯介
|
Specification for fixed capacitors of assessed quality: generic data and methods of test - Polycarbonate dielectric capacitors and polyethylene terephthalate dielectric capacitors for d.c. use and polypropylene dielectric capacitors for d.c. and a.c. use
|
BS 9520-1983
|
经质量评定的直流和低频用途电连接器:一般数据、试验方法和性能鉴定程序
|
Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures
|
BS 9522 N0001-1982
|
直流和低频用多触头圆形电气连接件详细规范、带有前面可释放后面可拆卸的压接触点卡口接头.全面评估级
|
Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment level
|
BS 9522 N0003-1990
|
直流和低频用多触点圆形电气连接器详细规范.带后可插入、后释放、后可拆卸压接触点的无档板密封、耐环境影
|
Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling non-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealed with non-removable solder contact styles - Full plus airframe fit assessment
|
BS 9522-1990
|
经质量评估的直流和低频用圆形连接器详细规范的制定规则.全面、基本和全面加机体评估级
|
Rules for the preparation of detail specifications for circular electrical connectors of assessed quality for d.c. and low frequency applications - Full, basic and full plus airframe assessment levels
|
BS 9523-1984
|
直流和低频用经质量评估的整体金属壳矩形电气连接器详细规范的制定规则.全面和基本评估级
|
Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applications - Full and basic assessment levels
|
BS 9524-1984
|
直流和低频用经质量评估的模压体矩形电气连接器详细规范的制定规则.全面和基本评估级
|
Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications - Full and basic assessment levels
|
BS 9525-1984
|
直流和低频用经质量评定的双件式印制电路板插接件和转接装置详细规范的编制规则.全面和基本评定级
|
Rules for the preparation of detail specifications for two-part printed board electrical connectors and board-mounted transition devices of assessed quality for d.c. and l.f. applications: full and basic assessment levels
|
BS CECC 30401 023-1979
|
固定式金属化聚乙烯对苯二酸盐薄膜介质直流电容器协调详细规范.矩形绝缘金属外壳、刚性径向终端.全面评估级
|
Harmonized detail specification for fixed metallized polyethylene terephthalate film dielectric d.c. capacitors - Rectangular insulated non-metallic case, rigid radial terminations - Full assessment level
|
BS CECC 30401 033-1981
|
固定式金属化聚乙烯对苯二酸盐薄膜介质直流电容器详细规范(长寿命).刚性径向矩形非金属绝缘壳体.全面评定级
|
Harmonized detail specification for fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (long-life grade) - Rectangular insulated non-metallic case, rigid radial terminations - Full assessment level
|
BS CECC 30401-1985
|
电子元器件用质量评估协调体系规范.空白详细规范:固定式金属化聚乙烯-对苯二酸盐薄膜介质直流电容器
|
Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
|
BS DD CLC/TS 50457-1-2008
|
电动车辆的传导充电.直流充电站
|
Conductive charging for electric vehicles - D.C. charging station
|
BS DD IEC/PAS 62344-2007
|
高压直流电(HVDC)连接(NPPAS)用地面电极设计的通用指南
|
General guidelines for the design of ground electrodes for high-voltage direct current (HVDC) links (NPPAS)
|
BS DD IEC/PAS 62543-2009
|
电压源换相直流输电
|
DC transmission using voltage sourced converters
|
BS DD IEC/PAS 62544-2008
|
高压直流输电设施中有源滤波器
|
Active filters in HVDC applications
|
BS EN 130502-1998
|
电子元器件质量评定协调体系.空白详细规范.金属多碳膜介质直流固定电容器.评定等级 EZ
|
Harmonized system of quality assessment for electronic components - Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level EZ
|
BS EN 131700-1998
|
电子元器件质量评定协调体系.分规范:直流电流用有薄层金属箔和聚碳酸酯薄膜电介质电极的固定电容器.
|
Harmonized system of quality assessment for electronic components - Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
|
BS EN 131701-1998
|
电子元件质量评定协调体系.空白详细规范:有薄层金属箔和聚碳酸酯薄膜电介质电极的直流固定电容器.评估等级E
|
Harmonized system of quality assessment for electronic components - Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric - Assessment level E
|
BS EN 131702-1998
|
电子元器件质量评定协调体系.空白详细规范:直流电流用有薄层金属箔和聚碳酸酯薄膜电介质电极的固定电容器.
|
Harmonized system of quality assessment for electronic components - Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric - Assessment level EZ
|
BS EN 1648-1-2005
|
休闲旅居车辆.12V直流超低压电器装置.旅居挂车
|
Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Caravans
|
BS EN 1648-2-2005
|
休闲旅居车辆.12V直流超低压电器装置.机动旅居挂车
|
Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Motor caravans
|
BS EN 2349-306-2006
|
航空航天系列.继电器和电流接触器要求和试验程序.第306部分:交直流负荷
|
Aerospace series — Requirements and test procedures for relays and contactors — Part 306: Overload d.c. and a.c.
|
BS EN 50122-2-1999
|
铁路设施.固定设备.直流牵引系统引起的杂散电流效应保护措施
|
Railway applications - Fixed installations - Protective provisions against the effects of stray currents caused by d.c. traction systems
|
BS EN 50123-1-2003
|
铁路设施.固定设备.直流开关装置.总则
|
Railway applications - Fixed installations - D.C. switchgear - General
|
BS EN 50123-2-2003
|
铁路设施.固定设备.直流开关装置.直流断路器
|
Railway applications - Fixed installations - D.C. switchgear - D. C. circuit breakers
|
BS EN 50123-3-2003
|
铁路设施.固定设备.直流开关装置.室内直流切断开关、负荷开关和接地开关
|
Railway applications - Fixed installations - D.C. switchgear - Indoor d.c. disconnectors, switch-disconnectors and earthing switches
|
BS EN 50123-4-2003
|
铁路设施.固定设备.直流开关装置.室外直流切断开关、负荷开关和接地开关
|
Railway applications - Fixed installations - D.C. switchgear - Outdoor d.c. disconnectors, switch-disconnectors and earthing switches
|
BS EN 50123-5-2003
|
铁路设施.固定设备.直流开关装置.直流系统中特殊应用的电涌放电器和低电压限制器
|
Railway applications - Fixed installations - D.C. switchgear - Surge arresters and low-voltage limiters for specific use in d.c. systems
|
BS EN 50123-6-2003
|
铁路设施.固定设备.直流开关装置.直流开关装置组件
|
Railway applications - Fixed installations - D.C. switchgear - D. C. switchgear assemblies
|
BS EN 50123-7-1-2003
|
铁路设施.固定设备.直流开关设备.直流牵引系统专用测量、控制与保护装置.应用指南
|
Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Measurement, control and protection devices for specific use in d.c. traction systems - Application guide
|
BS EN 50123-7-2-2003
|
铁路设施.固定设备.直流开关装置.直流牵引系统专用测量、控制和保护设备.绝缘电流传感器和其他电流测量设备
|
Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices
|
BS EN 50123-7-3-2003
|
铁路设施.固定设备.直流开关装置.直流牵引系统专用测量、控制和保护设备.绝缘电压传感器和其他电压测量设备
|
Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices
|
BS EN 50162-2005
|
直流系统中杂散电流引起腐蚀的防护
|
Protection against corrosion by stray current from direct current systems
|
BS EN 50227-1999
|
控制电路装置和开关元件邻近传感器、邻近传感器和开关放大器用直流接口
|
Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR)
|
BS EN 50289-1-2-2001
|
通信电缆.试验方法规范.电气试验方法.直流电阻
|
Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance
|
BS EN 50311-2003
|
铁路设施.机车车辆.照明荧光灯用直流电子镇流器
|
Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps
|
BS EN 60077-3-2003
|
铁路设施.机车车辆用电气设备.电气部件.直流断路器规则
|
Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for d.c. circuit-breakers
|
BS EN 60146-2-2000
|
半导体变流器.一般要求和线路换向变流器.包括直流变换器的自换向变流器
|
Semiconductor convertors - General requirements and line commutated convertors - Self-commutated semiconductor converters including direct d.c. converters
|
BS EN 60204-11-2001
|
机械的安全性.机器的电气设备.电压大于1000V交流电或1500V直流电和功率不超过36KV的高压设备的要求
|
Safety of machinery - Electrical equipment of machines - Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV
|
BS EN 60243-2-2001
|
固体绝缘材料介电强度试验方法.直流电压测试补充要求
|
Methods of test for electric strength of solid insulating materials - Additional requirements for tests using direct voltage
|
BS EN 60247-2004
|
绝缘液体.相对电容率、电介质损耗因数(tan<δ>)和直流电阻率的测量
|
Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity
|
BS EN 60384-11-1-2008
|
电子设备用固定电容器.空白详细规范.聚对苯二甲酸乙二醇酯薄膜电介质金属箔直流固定电容器.评定等级EZ
|
Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification —Fixed polyethylene-terephthalate filmdielectric metal foil d.c. capacitors —Assessment level EZ
|
BS EN 60384-11-2008
|
电子设备用固定电容器.分规范.金属箔式聚对苯二甲酸乙二醇酯膜介质直流固定电容器
|
Fixed capacitors for use in electronic equipment - Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
|
BS EN 60384-13-1-2006
|
电子设备用固定电容器.第13-1部分:空白详细规范.聚丙烯薄膜介质金属箔直流固定电容器.评估等级E
|
Fixed capacitors for use in electronic equipment -Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E and EZ
|
BS EN 60384-13-2006
|
电子设备用固定电容器.第13部分:分规范.聚丙烯膜介质金属箔直流固定电容器
|
Fixed capacitors for use in electronic equipment - Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
|
BS EN 60384-16-1-2005
|
电子设备用固定电容器.第16-1部分:空白详细规范:金属化聚丙烯薄膜电介质直流固定电容器.评定等级E和EZ
|
Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E and EZ
|
BS EN 60384-16-2005
|
电子设备用固定电容器.第16部分:分规范:金属化聚丙烯薄膜电介质直流固定电容器
|
Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
|
BS EN 60384-19-1-2006
|
电子设备用固定电容器.第19-1部分:空白详细规范.金属化聚对苯二甲酸乙二醇酯膜电介质表面安装直流固定电容
|
Fixed capacitors foruse in electronicequipment —Part 19-1: Blank detail specification —Fixed metallized polyethyleneterephthalatefilm dielectric surfacemount d.c. capacitors — Assessmentlevel EZ
|
BS EN 60384-19-2006
|
电子设备用固定电容器.第19部分:分规范.金属化聚对苯二甲酸乙二醇酯膜电介质表面安装直流固定电容器
|
Fixed capacitors foruse in electronicequipment —Part 19: Sectional specification — Fixedmetallized polyethylene-terephthalatefilm dielectric surface mount d.c.capacitors
|
BS EN 60384-2-1-2005
|
电子设备用固定电容器.第2-1部分:空白详细规格.金属化聚对苯二甲酸乙二酯薄膜电介质直流固定电容器.评定等
|
Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Fixed metallized polyethtylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ
|
BS EN 60384-2-2005
|
电子设备用固定电容器.第2部分:分规范:金属化聚对苯二甲酸乙二醇酯薄膜电介质直流固定电容器
|
Fixed capacitors for use in electronic equipment - Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors
|
BS EN 60384-20-1-2008
|
电子设备用固定式电容器.空白详细规范.金属化聚苯撑硫薄膜电介质表面安装直流(d.c.)固定电容器.评定等级EZ
|
Fixed capacitors for use in electronic equipment -Part 20-1: Blank detail specification - Fixed metalized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ
|
BS EN 60384-20-2008
|
电子设备用固定电容器.分规范.金属化聚苯撑硫薄膜电介质表面安装直流(d.c.)固定电容器
|
Fixed capacitors foruse in electronicequipment —Part 20: Sectional specification —Fixed metallized polyphenylene sulfidefilm dielectric surface mount d.c.capacitors
|
BS EN 60384-23-1-2005
|
电子设备用固定电容器.空白详细规范.金属化聚萘二甲酸乙二醇酯薄膜电介质芯片直流固定电容器.评定等级EZ
|
Fixed capacitors for use in electronic equipment - Blank detail specification - Fixed metallized polyethylene naphthalate film dielectric chip d.c. capacitors - Assessment level EZ
|
BS EN 60384-23-2005
|
电子设备用固定电容器.分规范.表面安装的金属化聚乙烯苯二甲酸盐膜介质直流(DC)固定电容器
|
Fixed capacitors for use in electronic equipment - Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
|
BS EN 60384-6-1-2005
|
电子设备用固定电容器.第6-1部分:空白详细规范.金属化聚碳酸酯薄膜电介质直流固定电容器.评定等级E
|
Fixed capacitors for use in electronic equipment - Part 6-1: Blank detail specification - Fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E
|
BS EN 60404-4-1997+A2-2008
|
磁性材料.软磁材料直流磁性的测量方法
|
Magnetic materials - Part 4:Methods of measurement of d.c. magnetic properties of magnetically soft materials
|
BS EN 60477-1999
|
实验室用直流(d.c.)电阻器
|
Laboratory d.c. resistors
|
BS EN 60523-1980
|
直流电位计
|
Direct-current potentiometers
|
BS EN 60524-1979
|
直流电阻分压箱
|
Direct-current resistive volt ratio boxes
|
BS EN 60564-1979
|
测量电阻用直流电桥
|
D.C. bridges for measuring resistance
|
BS EN 60633-1999+A1-2009
|
高压直流(HVDC)输电术语
|
Terminology for high-voltage direct current (HVDC) transmission
|
BS EN 60700-1-1998+A2-2008
|
高压直流输电用晶闸管换流阀.第1部分:电气试验
|
Thyristor valves forhigh voltage directcurrent (HVDC) powertransmission —Part 1: Electrical testing
|
BS EN 60811-5-1-2000
|
电缆的绝缘和护套材料.通用试验方法.填充复合物的专用方法.滴点.油分离.低温脆性.总酸值.无腐蚀性成分.23℃
|
Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C
|
BS EN 60895-2003
|
带电作业.标称交流电压800kV及以下和直流电压±600kV的带电作业用导电服
|
Live working - Conductive clothing for use at a nominal voltage up to 800 kV a.c. and <+OR-> 600 kV d.c
|
BS EN 60898-2-2006
|
电气附件.家用和类似用途电器装置过电流保护断路器.交流和直流电路断路器
|
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c and d.c. operation
|
BS EN 60900-2004
|
带电作业.使用压力小于交流1000V和直流1500V的手工工具
|
Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c
|
BS EN 60925-1991
|
管形荧光灯的直流供的电子镇流器性能要求规范
|
Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
|
BS EN 60947-5-6-2001
|
低压开关设备和控制设备规范.控制电路器件和开关元件.近接传感器和开关放大器用直流接口(NAMUR)
|
Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) - DC interface for proximity sensors and switching amplifiers (NAMUR)
|
BS EN 61000-4-17-1999
|
电磁兼容性(EMC).试验和测量技术.直流电输入点脉动抗干扰试验
|
Electromagnetic compatibility (EMC) - Testing and measurement techniques - Ripple on d.c. input power port immunity test
|
BS EN 61000-4-29-2001
|
电磁兼容性(EMC).试验和测量技术.直流输入电力端口的电压暂降、短时中断和电压变化抗扰度试验.基础EMC出版
|
Electromagnetic compatibility (EMC) - Testing and measurement techniques - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests - Voltage dips, short interruptions and voltage variations on d.c.input power ports - Immunity tests - Basic EMC Publication
|
BS EN 61047-2004
|
钨丝灯用交直流供电电子降压转换器.性能要求
|
D.C. or A.C. supplied electronic step-down convertors for filament lamps - Performance requirements
|
BS EN 61076-2-1999
|
直流低频模拟及高速数字数据系统用经过质量评定的连接器.圆形连接器.分规范
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Circular connectors with assessed quality - Sectional specification
|
BS EN 61076-3-100-2000
|
直流低频模拟及数字高速数据应用系统用连接器.有质量评定的矩形连接器.带有1.27mm双排不可拆卸矩形接触件及
|
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100:Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
|
BS EN 61076-3-101-1998
|
直流低频模拟及高速数字数据系统用已经过质量评定的连接器. 矩形连接器.带梯形壳的屏蔽连接器的有效范围和
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 x 2,54 mm centre-line
|
BS EN 61076-3-103-2004
|
有质量评定的直流低频模拟及数字高速数据应用系统用连接器.矩形连接器.高速串行数据(HSSDC)用带1.25mm间距
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
|
BS EN 61076-4-001-1997
|
直流低频模拟设备和高速数字数据应用设备用已经过质量评定的连接器.印制电路板连接器.空白详细规范
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Blank detail specification
|
BS EN 61076-4-100-2002
|
直流低频模拟和数字高速数据用经过质量评定的连接器.印制电路板连接器.2.5mm网格印制电路板和背板用二部式
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
|
BS EN 61076-4-102-1997
|
直流低频率模拟及高速数字数据系统用已经过过质量评定的连接器.印制电路板连接器.依照IEC 60917米制网格带
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
|
BS EN 61076-4-103-1999
|
经过质量评定的直流低频模拟及数字高速数据系统用连接器.印制电路板连接器.带屏蔽和2.5mm基栅的两件式连接
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards
|
BS EN 61076-4-105-1998
|
直流低频模拟及高速数字数据系统用经过质量评定的连接器.印制电路板连接器.包括电信和声讯工程等各种用途的
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry
|
BS EN 61076-4-110-2002
|
直流低频模拟和数字高速数据设备用经质量评定的连接器.印制板连接器.2.0mm基本栅级的并具有完全屏蔽和锁定
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
|
BS EN 61076-4-1997
|
直流低频模拟及高速数字数据系统用经质量评定的连接器.分规范.印制电路板用连接器
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Sectional specification - Printed board connectors
|
BS EN 61076-5-2001
|
直流低频率模拟及高速数据数字设备用连接器.经过质量评定的串联插座.分规范
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - In-line sockets with assessed quality - Sectional specification
|
BS EN 61076-7-2001
|
直流低频率模拟及高速数字数据系统用经过质量评定的连接器.分规范
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
|
BS EN 61204-1995
|
直流输出的低压供电装置.性能特征和安全性要求
|
Low-voltage power supply devices, d.c. output - Performance characteristics and safety requirements
|
BS EN 61204-3-2001
|
直流输出低压供电装置.电磁兼容性(EMC)
|
Low voltage power supplies, d.c. output - Electromagnetic compatibility (EMC)
|
BS EN 61204-6-2001
|
直流输出低压供电装置.经过性能评定的低压供电装置要求
|
Low voltage power supplies, d.c. output - Requirements for low-voltage power supplies of assessed performance
|
BS EN 61204-7-2006
|
直流输出的低压电源.安全要求
|
Low-voltage power supplies, d.c. output - Safety requirements
|
BS EN 61325-1996
|
标称电压高于1000V以上高架线的绝缘.直流装置陶瓷或玻璃绝缘件.定义,试验方法和验收规则
|
Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for d.c systems - Definitions, test methods and acceptance criteria
|
BS EN 61347-2-12-2005
|
灯控制装置.第2-12部分:放电灯(荧光灯除外)用直流或交流电子镇流器的特殊要求
|
Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
|
BS EN 61347-2-13-2006
|
灯控装置.发光二极管交直流供电控制装置的特殊要求
|
Lamp controlgear - Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
|
BS EN 61347-2-2-2001
|
灯的控制装置.白炽灯用交、直流电子降压转换器的特殊要求
|
Lamp controlgear - Particular requirements for d.c or a.c. supplied electronic step-down convertors for filament lamps
|
BS EN 61347-2-4-2001
|
灯具控制开关.普通照明直流供电电子镇流器专门要求
|
Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for general lighting
|
BS EN 61347-2-5-2001
|
灯具控制开关.公共运输照明直流供电电子镇流器专门要求
|
Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for public transport lighting
|
BS EN 61347-2-6-2001
|
灯具控制开关.飞行器照明直流供电电子镇流器专门要求
|
Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for aircraft lighting
|
BS EN 61347-2-7-2006
|
灯控开关.第2-7部分:应急照明用直流电源镇流器的特殊要求
|
Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting
|
BS EN 61377-2-2003
|
铁路设施.机车车辆.联合试验.断路直流牵引电动机及其控制设备
|
Railway applications - Rolling stock - Combined testing - Chopper-fed direct current traction motors and their control
|
BS EN 61557-1-2007
|
1000V交流和1500V直流低压配电系统电气安全.保护措施测试、测量或监测设备.一般要求
|
Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 1: General requirements
|
BS EN 61557-10-2001
|
最高达1000V交流和1500V直流的低压分配系统电气安全性.防护测量的试验、测量或监测设备.试验、测量或监测组
|
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Combined measuring equipment for testing, measuring or monitoring of protective measures
|
BS EN 61557-12-2008
|
交流1000V和直流1500V以下低压配电系统的电气安全.保护措施的测试、测量或监测用设备.性能测量和监测装置(P
|
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring andmonitoring devices (PMD)
|
BS EN 61557-2-2007
|
1000V交流和1500V直流低压配电系统电气安全.保护措施测试、测量或监测设备.绝缘电阻
|
Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 2: Insulation resistance
|
BS EN 61557-3-2007
|
1000V交流和1500V直流低压配电系统电气安全.保护措施测试、测量或监测设备.回路阻抗
|
Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 3: Loop impedance
|
BS EN 61557-4-2007
|
1000V交流和1500V直流低压配电系统电气安全.保护措施测试、测量或监测设备.接地和等位连接电阻
|
Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 4: Resistance of earth connectionand equipotential bonding
|
BS EN 61557-5-2007
|
1000V交流和1500V直流低压配电系统电气安全.保护措施测试、测量或监测设备.接地电阻
|
Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 5: Resistance to earth
|
BS EN 61557-6-1998
|
不超过交流1000V和直流1500V低压配电系统电气安全性.防护用试验、测量或监测设备.TT、TN和IT系统用残余电流
|
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Residual current devices (RCD) in TT, TN and IT systems
|
BS EN 61557-6-2007
|
交流1000V和直流1500V以下低压配电系统中的电气安全.防护措施的测验、测量或监控设备.第6部分:TT、TN和IT系
|
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.. Equipment for testing, measuring or monitoring of protective measures - Effectiveness of residual current devices (RCD) in TT, TN and IT systems
|
BS EN 61557-7-2007
|
1000V交流和1500V直流低压配电系统电气安全.保护措施测试、测量或监测设备.相序
|
Electrical safety in lowvoltage distributionsystems up to1 000 V a.c. and1 500 V d.c. —Equipment for testing,measuring ormonitoring ofprotective measures —Part 7: Phase sequence
|
BS EN 61557-8-2007
|
低于1000V交流和1500V直流低压配电系统的电气安全.保护措施的测试、测量或监视设备.第8部分:IT系统绝缘监视
|
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Insulation monitoring devices for IT systems
|
BS EN 61557-9-2009
|
不大于1000伏交流和1500伏直流的低压分布系统的电气安全.第9部分:IT系统中绝缘故障的定位设备
|
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.. Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location inIT systems
|
BS EN 61660-1-1997
|
发电厂和变电所直流辅助设备短路电流.第1部分:短路电流计算
|
Short-circuit currents in d.c auxiliary installations in power plants and substations - Calculation of short-circuit currents
|
BS EN 61660-2-1997
|
发电厂和变电所直流辅助设备短路电流.第2部分:结果计算
|
Short-circuit currents in d.c. auxiliary installations in power plants and substations - Calculation of effects
|
BS EN 61788-1-2007
|
超导性.临界电流测量.铌-钛复合超导体的直流临界电流
|
Superconductivity - Part 1: Critical current measurement - D.C. critical current of Nb-Ti composite superconductors
|
BS EN 61788-2-2007
|
超导性.临界电流测量.Nb3Sn复合超导体的直流(D.C.)临界电流
|
Superconductivity - Critical current measurement - D.C. critical current of Nb3Sn composite superconductors
|
BS EN 61788-3-2006
|
超导性.临界电流测量.涂层银或银合金的Bi-2212和Bi-2223氧化超导体的直流临界电流
|
Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
|
BS EN 61800-1-1998
|
可调速的电驱动系统.低电压可调速直流电驱动系统额定规范
|
Adjustable speed electrical power drive systems - Rating specifications for low voltage adjustable speed d.c. power drive systems
|
BS EN 61851-21-2002
|
电动车辆导电充电系统.导电连接至交流/直流的电动车辆要求.电源
|
Electric vehicle conductive charging system - Electric vehicle requirements for conductive connection to an a.c./d.c - supply
|
BS EN 62024-2-2009
|
高频感应元件.电气特性和测量方法.直流对直流变流器用感应器的额定电流
|
High frequency inductive components - Electrical characteristics and measuring methods - Rated current of inductors for DC to DC converters
|
BS EN 62196-1-2004
|
电气机车输入端和机车连接器用插头和插座.电气机车传导冲电.250A交流和400A直流及以下的电气机车充电
|
Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Charging of electric vehicles up to 250 A a.c. and 400 A d.c
|
BS EN 62199-2004
|
直流套管
|
Bushings for D.C. application
|
BS EN 62384-2006
|
发光二极管模块的交直流电源电子控制装置.性能要求
|
D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements
|
BS EN 62384-2006+A1-2009
|
发光二极管(LED)模块的交流或直流供电电子控制装置.性能要求
|
DC or AC supplied electronic control gear for LED modules - Performance requirements
|
BS EN 62386-206-2009
|
数字可寻址照明接口.控制装置用特殊要求.数字信号转换为直流电压信号(装置类型 5)
|
Digital addressable lighting interface - Particular requirements for control gear - Conversion from digital signal into d.c. voltage (device type 5)
|
BS EN 62501-2009
|
高电压直流输电(HVDC)用电压源换流器(VSC)电子管.电气测试
|
Voltage sourced converter (VSC) valves for high-voltage direct current (H VDC) power transmission - Electrical testing
|
BS EN ISO 10133-2001
|
小艇.电力系统.超低电压直流电力设备
|
Small craft - Electrical systems - Extra-low-voltage d.c. installations
|
BS EN ISO 7346-3-1998
|
水质.对淡水鱼(Brachydanio rerio Hamilton-Buchanan(真骨总目、鲤科))急性致死物质毒性的测定.直流法
|
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Flow-through method
|
BS EN ISO 8849-2003
|
小艇.电动直流舱底泵
|
Small craft - Electrically operated direct-current bilge-pumps
|
BS G 142-1953
|
航空用超低电压直流系统重负载电磁驱动的单极断路器规范
|
Specification for heavy duty, electro-magnetically operated, single-pole circuit-breakers for extra-low voltage d.c. systems in aircraft
|
BS G 243-1990
|
发动机用点火电缆规范(4kV直流)
|
Specification for igniter cables for engine use (4 kV d.c.)
|
BS IEC 62527-2007
|
直流电等级规范用标准试验接口语言(STIL)的扩展标准
|
Standard for extensions to standard test interface language (STIL) for DC level specification
|
BS QC 300500-1989
|
电子元器件质量评估协调体系.电子设备用固定电容器.分规范:金属化聚碳酸酯薄膜介质直流固定电容器
|
Harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Sectional specification: fixed metallized polycarbonate film dielectric d.c. capacitors
|
BS QC 300501-1990
|
电子元器件质量评估的协调体系.电子设备用固定电容器.空白详细规范:金属化聚碳酸酯薄膜介质直流固定电容器.
|
Specification for harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Blank detail specification: fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E
|
BS QC 301700-1992
|
电子元器件质量评估协调体系.电子设备用固定电容器.聚碳酸酯薄膜介质金属箔直流固定电容器分规范
|
Harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Sectional specification for fixed polycarbonate film dielectric metal foil d.c. capacitors
|
BS QC 301701-1992
|
电子元器件质量评估协调体系.电子设备用固定电容器.空白详细规范.聚碳酸酯薄膜介质金属直流固定电容器.评估
|
Harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Blank detail specification - Fixed polycarbonate film dielectric metal foil d.c. capacitors - Assessment level E
|
DD ENV 50123-7-1-1999
|
铁路应用.固定装置.直流开关装置.直流牵引系统专用测量、控制和防护设备.应用指南
|
Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Application guide
|
编号 |
中文名称 |
英文名称 |