| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60034-19-1995 | 旋转电机.第19部分:普通电源或整流电源供电直流电机的专门试验方法 | Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies |
| IEC 60077-3-2001 | 铁路应用 机车车辆用电气设备 第3部分：电工元件 直流断路器用规则 | Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components; Rules for d.c. circuit-breakers |
| IEC 60146-2-1999 | 半导体变流器 第2部分:包括直接直流变流器的自换相半导体变流器 | Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters |
| IEC 60204-11-2000 | 机械的安全 机械的电气设备 第11部分:交流电压1000V 或直流电压1500V 以上和36kV以下高压设备的要求 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV |
| IEC 60243-2-2001 | 绝缘材料的电气强度 试验方法 第2部分：对直流电压试验的附加要求 | Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage |
| IEC 60246-1967 | 电视接收机用额定直流电压为20kV和25kV、最高工作温度为105℃的连接线 | Connecting wires having a rated voltage of 20 kV and 25 kV d.c. and a maximum working temperature of 105 °C for use in television receivers |
| IEC 60247-2004 | 液体绝缘材料.相对电容率、电介质损耗因数(tan<δ>)和直流电阻率的测量 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity |
| IEC 60381-1-1982 | 过程控制系统用模拟信号 第1部分:直流信号 | Analogue signals for process control systems. Part 1 : Direct current signals |
| IEC 60381-2-1978 | 过程控制系统用模拟信号 第2部分:直流电压信号 | Analogue signals for process control systems. Part 2 : Direct voltage signals |
| IEC 60384-11-1-2008 | 电子设备用固定电容器.第11-1部分:空白详细规范.金属箔式聚乙烯-对苯二甲酸酯膜介质直流固定电容器.评定等 | Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ |
| IEC 60384-11-2008 | 电子设备用固定电容器.第11部分:分规范.金属箔式聚乙烯-对苯二甲酸酯膜介质直流固定电容器 | Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors |
| IEC 60384-13-1 Corrigendum 1-2009 | 电子设备用固定式电容器.第13-1部分:空白详细规范.金属箔式聚丙烯膜介质直流固定电容器.评定等级E和EZ.技术 | Fixed capacitors for use in electronic equipment - Part 13-1: Bland detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E and EZ; Corrigendum 1 |
| IEC 60384-13-1-2006 | 电子设备用固定电容器.第13部分:分规范:聚苯乙烯膜介质金属箔直流固定电容器 | Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E |
| IEC 60384-13-2006 | 电子设备用固定电容器.第13部分:分规范:金属箔式聚苯乙烯膜介质直流固定电容器 | Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors |
| IEC 60384-16-1-2005 | 电子设备用固定电容器.第16-1部分:空白详细规范.金属化聚丙烯膜介质直流固定电容器.评定等级E和EZ | Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification - Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment level E and EZ |
| IEC 60384-16-2005 | 电子设备用固定电容器.第16部分:分规范.金属化聚丙烯膜介质直流固定电容器 | Fixed capacitors for use in electronic equipment - Part 16: Sectional specification - Fixed metallized polypropylene film dielectric d.c. capacitors |
| IEC 60384-17-1-2005 | 电子设备用固定电容器.第17-1部分:空白详细规范.金属化聚丙烯膜介质直流和脉冲固定电容器.评定等级E和EZ | Fixed capacitors for use in electronic equipment - Part 17-1: Blank detail specification - Fixed metallized polypropylene film dielectric a.c. and pulse capacitors - Assessment level E and EZ |
| IEC 60384-17-2005 | 电子设备用固定电容器.第17部分:分规范.金属化聚丙烯膜介质直流和脉冲固定电容器 | Fixed capacitors for use in electronic equipment - Part 17: Sectional specification - Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
| IEC 60384-19-1-2006 | 电子设备用固定电容器.第19-1部分:空白详细规范.金属化聚乙烯对苯二甲酸酯膜介质表面安装直流固定电容器.评 | Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors; Assessment level EZ |
| IEC 60384-19-2006 | 电子设备用固定电容器.第19部分:分规范:金属化聚乙烯对苯二甲酸酯膜介质表面安装直流固定电容器 | Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors |
| IEC 60384-2-1-2005 | 电子设备用固定电容器.第2-1部分:空白详细规范:金属化聚乙烯对苯二甲酸酯薄膜介质直流固定电容器 评定等级E | Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment level E and EZ |
| IEC 60384-2-2005 | 电子设备用固定电容器.第2部分:分规范.金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 | Fixed capacitors for use in electronic equipment - Part 2 : Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors |
| IEC 60384-20 Corrigendum 1-2008 | 电子设备用固定电容器.第20部分:分规范.金属化聚苯硫醚膜介质直流片式固定电容器.技术勘误1 | Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors; Corrigendum 1 |
| IEC 60384-20-1 Corrigendum 1-2008 | 电子设备用固定电容器.第20-1部分:空白详细规范.金属化聚苯硫醚膜介质直流片式固定电容器.评定等级EZ.技术 | Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ; Corrigendum 1 |
| IEC 60384-20-1-2008 | 电子设备用固定电容器.第20-1部分:空白详细规范.金属化聚苯硫醚膜介质直流片式固定电容器.评定等级EZ | Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ |
| IEC 60384-20-2008 | 电子设备用固定电容器.第20部分:分规范.金属化聚苯硫醚膜介质直流片式固定电容器 | Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors |
| IEC 60384-23-1-2006 | 电子设备用固定电容器.第23-1部分:空白详细规范.表面安装的金属化聚乙烯苯二甲酸盐薄膜介质直流固定电容器 | Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ |
| IEC 60384-23-2006 | 电子设备用固定电容器.第23部分:分规范.表面安装的金属化聚乙烯苯二甲酸盐薄膜介质直流固定电容器 | Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors |
| IEC 60404-4 AMD 1-2000 | 磁性材料 第4部分:磁性软材料直流磁性能的测量方法 修改1 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials; Amendment 1 |
| IEC 60404-4 AMD 2-2008 | 磁性材料.第4部分:软磁材料的直流磁性的测量方法.修改件2 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetially soft materials; Amendment 2 |
| IEC 60404-4 Edition 2.1-2000 | 磁性材料.第4部分:软磁材料直流磁性能的测量方法 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials |
| IEC 60404-4 Edition 2.2-2008 | 磁性材料.第4部分:软磁材料的直流磁性的测量方法 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials |
| IEC 60404-4-1995 | 磁性材料.第4部分:铁和钢直流磁特性测量方法 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of iron and steel |
| IEC 60477 AMD 1-1997 | 实验室用直流电阻器 修改1 | Laboratory d.c. resistors; Amendment 1 |
| IEC 60477-1974 | 实验室用直流电阻器 | Laboratory d.c. resistors |
| IEC 60510-1A-1980 | 卫星地面站用无线电设备的测量方法 第1部分:分系统和分系统组合通用的测量 补充1:6.2条:直流电源条件 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. First supplement: Sub-clause 6.2: D.C. source conditions |
| IEC 60523 AMD 1 Corrigendum 1-1980 | 直流电位差计 | Direct-current potentiometers |
| IEC 60523 AMD 1-1979 | 直流电位差计 修改1 | Direct-current potentiometers |
| IEC 60523 AMD 2-1997 | 直流电位差计 修改2 | Direct-current potentiometers; Amendment 2 |
| IEC 60523-1975 | 直流电位差计 | Direct-current potentiometers |
| IEC 60524 AMD 1-1981 | 直流电阻电压比率计箱 修改1 | Direct-current resistive volt ratio boxes |
| IEC 60524 AMD 2-1997 | 直流电阻电压比率计箱 修改2 | Direct-current resistive volt ratio boxes; Amendment 2 |
| IEC 60524-1975 | 直流电阻电压比率计箱 | Direct-current resistive volt ratio boxes |
| IEC 60527-1975 | 直流放大器 特性和试验方法 | Direct current amplifiers; characteristics and test methods |
| IEC 60564 AMD 1-1981 | 测量电阻用直流电桥 修改1 | D.C. bridges for measuring resistance |
| IEC 60564 AMD 2-1997 | 测量电阻用直流电桥 修改2 | DC bridges for measuring resistance; Amendment 2 |
| IEC 60564-1977 | 测量电阻用直流电桥 | D.C. bridges for measuring resistance |
| IEC 60633 AMD 1-2009 | 高电压直流输电(HVDC)术语.修改件1 | Terminology for high-voltage direct current (HVDC) transmission; Amendment 1 |
| IEC 60633 Edition 2.1-2009 | 高压直流(HVDC)传输的专用术语 | Terminology for high-voltage direct current (HVDC) transmission |
| IEC 60633-1998 | 高压直流(HVDC)输电术语 | Terminology for high-voltage direct current (HVDC) transmission |
| IEC 60700-1 AMD 1-2003 | 高压直流(HVDC)电力传输用可控硅阀门.第1部分:电气试验.修改件1 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing; Amendment 1 |
| IEC 60700-1 AMD 2-2008 | 高压直流电(HVDC)电力传输用半导体闸流管阀.第1部分:电气测试 | Thyristor valves for high-voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
| IEC 60700-1 Edition 1.1-2003 | 高压直流(HVDC)电力传输用可控硅阀.第1部分:电气试验 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
| IEC 60700-1 Edition 1.2-2008 | 高压直流电(HVDC)电力传输用晶闸管阀.第1部分:电测试 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
| IEC 60700-1-1998 | 高压直流(HVDC)输电用晶闸管阀 第1部分:电气试验 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
| IEC 60811-5-1 AMD 1-2003 | 电缆和光缆用绝缘和护套材料.通用试验方法.第5-1部分:填充复合物的专用方法.滴点.油分离.较低温脆性.总酸值 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C; Amendment 1 |
| IEC 60811-5-1 Edition 1.1-2004 | 电缆和光缆用绝缘和护套材料.通用试验方法.第5-1部分:填充复合物的专用方法.滴点.油分离.较低温脆性.总酸值 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C |
| IEC 60811-5-1-1990 | 电缆绝缘和护套材料的通用试验方法 第5部分:填充复合物的专用方法 第1节:滴点 油分离 较低温脆性 总酸值 无 | Common test methods for insulating and sheathing materials of electric cables; part 5: methods specific to filling compounds; section one: drop point; separation of oil; lower temperature brittleness; total acid number; absence of corrosive components; permittivity at 23 °C; d.c. resistivity at 23 °C and 100 °C |
| IEC 60895 Corrigendum 1-2003 | 带电作业.额定交流电压800kV及以下和直流电压600kV时带电作业用的导电衣服 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ?600 kV d.c. |
| IEC 60895-2002 | 带电作业.标称交流电压800kV以下和直流电压±600kV的带电作业用的导电衣着 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ?600 kV d.c. |
| IEC 60898-2 AMD 1-2003 | 家用和类似设施用的过电流保护断路器 第2部分:交流和直流操作断路器.修改件1 | Circuit-breakers for overcurrent protection for household an similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation; Amendment 1 |
| IEC 60898-2 Edition 1.1-2003 | 家用和类似设施用的过电流保护断路器.第2部分:交流和直流操作断路器 | Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation |
| IEC 60898-2-2000 | 家用和类似设施用的过电流保护断路器 第2部分:交流和直流操作的断路器 | Circuit-breakers for overcurrent protection for household an similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation |
| IEC 60900-2004 | 带电作业.交流1000V和直流1500V以下带电作业用手持工具 | Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c. |
| IEC 60906-3-1994 | 家用和类似用途插头插座的IEC系统 第3部分:交流和直流16A,6V、12V、24V、48V、安全特低电压(SELV)插头插座 | IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6 V, 12 V, 24 V, 48 V, a.c. and d.c. |
| IEC 60925 AMD 1-1996 | 管形荧光灯用直流供电电子镇流器 性能要求 修改1 | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements; Amendment 1 |
| IEC 60925 AMD 2-2001 | 管形荧光灯用直流供电电子镇流器 性能要求 修改2 | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements; Amendment 2 |
| IEC 60925 Edition 1.2-2001 | 管状荧光灯用直流电子镇流器.性能要求 | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
| IEC 60925-1989 | 管形荧光灯用直流供电电子镇流器 性能要求 | D.c. supplied electronic ballasts for tubular fluorescent lamps; performance requirements |
| IEC 60946-1988 | 过程测量和控制系统的二进制直流电压信号 | Binary direct voltage signals for process measurement and control systems |
| IEC 60947-5-6-1999 | 低压开关设备和控制设备 第5-6部分:控制电路器件和切换元件 接近传感器和切换放大器用直流连接器件(NAMUR) | Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) |
| IEC 61000-4-17 AMD 1-2001 | 电磁兼容性(EMC) 第4-17部分:试验和测量技术 直流输入电力端口上的纹 抗扰度试验 修改1 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple on d.c. input power port immunity test; Amendment 1 |
| IEC 61000-4-17 AMD 2-2008 | 电磁兼容性(EMC).第4-17部分:测试和测量技术.直流输入电力端口上波纹抗扰度试验.修改件2 | Electromagnetic compability (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test; Amendment 2 |
| IEC 61000-4-17 Edition 1.1-2002 | 电磁兼容性(EMC).第4-17部分:试验和测量技术.直流电流输入功率点通道.干扰试验 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple on d.c. input power port immunity test |
| IEC 61000-4-17 Edition 1.2-2009 | 电磁兼容性(EMC).第4-17部分:试验和测量技术.直流电输入功率端口纹波抗扰度试验 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques - Ripple on d.c. input power port immunity test |
| IEC 61000-4-17-1999 | 电磁兼容性(EMC) 第4-17部分:试验和测量技术 直流输入电力端口上的纹 抗扰度试验 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques - Ripple on d.c. input power port, immunity test |
| IEC 61000-4-29-2000 | 电磁兼容性(EMC).第4-29部分:试验和测量技术.直流输入电力端口上的电压暂降、短时中断和电压变化抗扰度试验 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
| IEC 61020-4-2-1995 | 电子设备用机电开关 第4部分:杠杆(钮子)开关的分规范 第2节:电气最高交流电压为227V、最高直流电压为30V、 | Electromechanical switches for use in electronic equipment - Part 4: Sectional specification for lever (toggle) switches - Section 2: Detail specification for one pole, two pole, four pole, sealed lever (toggle) switches, 277 V a.c. maximum, 30 V d.c. maximum, 20 A maximum electrical rating |
| IEC 61047-2004 | 钨丝灯用交直流供电电子降压转换器.性能要求 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements |
| IEC 61076-2-1998 | 直流低频模拟及数字高速数据应用系统用连接器 第2部分:有质量评定的圆形连接器 分规范 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification |
| IEC 61076-3-100-1999 | 直流低频模拟及数字高速数据应用系统用连接器 第3-100部分:有质量评定的矩形连接器 带有1.27mm双排不可拆卸 | Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
| IEC 61076-3-101-1997 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器 第3部分:矩形连接器 第101节:在1.27mm×2.54mm中 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm × 2,54 mm centre-line |
| IEC 61076-4-001-1996 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器 第4部分:印制板连接器 第001节:空白详细规范 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification |
| IEC 61076-4-102-1997 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器 第4部分:印制板连接器 第102节:符合IEC 60917的 | Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
| IEC 61076-4-103-1999 | 直流低频模拟及数字高速数据应用系统用连接器 第4部分:有质量评定的印制板连接器 第103节:具有屏蔽罩及基本 | Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm |
| IEC 61076-4-104-1999 | 直流低频模拟及数字高速数据应用系统用连接器 第4-104部分:有质量评定的印制板连接器 基本网格为2.0mm、接 | Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on an multiple grid of 0,5 mm |
| IEC 61076-4-105-1995 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器 第4部分:印制板连接器 第105节:供包括通信和音响 | Connectors with assessed quality for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed boards connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
| IEC 61076-4-1995 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器 第4部分:分规范 印制板连接器 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
| IEC 61076-7-2000 | 直流低频模拟及数字高速数据应用系统用连接器 第7部分:具有质量评定的包括鉴定和能力批准的电缆引出端附件 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification |
| IEC 61196-1-101-2005 | 同轴通信电缆.第1-101部分:电气试验方法.电缆导线的直流电阻试验 | Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor d.c. resistance of cable |
| IEC 61204 AMD 1-2001 | 直流输出的低压电源装置 性能特性和安全要求 修改1 | Low-voltage power supply devices, d.c. output - Performance characteristics; Amendment 1 |
| IEC 61204 Edition 1.1-2001 | 直流输出低压供电装置.性能特性 | Low-voltage power supply devices, d.c. output - Performance characteristics |
| IEC 61204-1993 | 直流输出的低压电源装置 性能特性和安全要求 | Low-voltage power supply devices, d.c. output; performance characteristics and safety requirements |
| IEC 61204-3 Corrigendum 1-2000 | 直流输出的低压电源装置.第3部分:电磁兼容性(EMC) | Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) |
| IEC 61204-3-2000 | 直流输出的低压电源装置 第3部分:电磁兼容性(EMC) | Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) |
| IEC 61204-6-2000 | 直流输出的低压电源装置 第6部分:具有评定性能的低压电源装置的要求 | Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies of assessed performance |
| IEC 61204-7-2006 | 直流输出的低压电源装置.第7部分:安全要求 | Low-voltage power supplies, d.c. output - Part 7: Safety requirements |
| IEC 61325-1995 | 标称电压1000V以上的架空线用绝缘子 直流系统用陶瓷或玻璃绝缘子单元 定义、试验方法和验收准则 | Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitons, test methods and acceptance criteria |
| IEC 61347-2-12-2005 | 灯的控制装置.第2-12部分:放电灯(荧光灯除外)用直流或交流电子镇流器的特殊要求 | Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) |
| IEC 61347-2-13-2006 | 灯控装置.第2-13部分:发光二极管交直流供电控制设施的特殊要求 | Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgears for LED modules |
| IEC 61347-2-2 AMD 1-2005 | 灯的控制装置.第2-2部分:白炽灯的直流或交流供电电子降压变换器的特殊要求. | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps; Amendment 1 |
| IEC 61347-2-2 AMD 2-2006 | 灯控设备.第2-2部分:白炽灯用交、直流电子电压转换器的特殊要求 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps; Amendment 2 |
| IEC 61347-2-2 Edition 1.1-2006 | 灯的控制装置.第2-2部分:白炽灯用交、直流电子降压转换器的特殊要求 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| IEC 61347-2-2 Edition 1.2-2006 | 灯控制设备.第2-2部分:白炽灯用直流或交流电子降压转换器的特殊要求 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| IEC 61347-2-2-2000 | 灯的控制装置 第2-2部分:白炽灯用交、直流电子降压转换器的特殊要求 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| IEC 61347-2-4-2000 | 灯的控制装置 第2-4部分:普通照明用直流电子镇流器的特殊要求 | Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting |
| IEC 61347-2-5-2000 | 灯的控制装置 第2-5部分:公共运输工具照明用直流电子镇流器的特殊要求 | Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting |
| IEC 61347-2-6-2000 | 灯的控制装置 第2-6部分:航空器照明用直流电子镇流器的特殊要求 | Lamp controlgear - Part 2-6: Particular requirements for d.c. supplied electronic ballasts for aircraft lighting |
| IEC 61347-2-7-2006 | 灯的控制装置 第2-7部分:应急照明用直流电子镇流器的特殊要求 | Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting |
| IEC 61377-2-2002 | 铁路设施.机车车辆.联合试验.第2部分:反向直流牵引电动机及其控制设备 | Railway applications - Rolling stock; Combined testing - Part 2: Chopper-fed direct current traction motors and their control |
| IEC 61378-2-2001 | 变流变压器 第2部分：高压直流（HVDC）用变压器 | Convertor transformers - Part 2: Transformers for HVDC applications |
| IEC 61557-1-2007 | 1000V交流和小于1500V直流低压配电系统中的电气安全性.防护措施的试验、测量和监控设备.第1部分:一般要求 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements |
| IEC 61557-10-2000 | 1000V交流和1500V直流的低压分配系统的电气安全.防护测量的试验、测量和监测设备.第10部分:试验测量或防护 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures |
| IEC 61557-11-2009 | 交流1000V和直流1500V以下低压配电系统中的电气安全性.防护措施的试验、测量或监控设备.第11部分:TT、TN和I | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems |
| IEC 61557-12-2007 | 交流1000V和直流1500V以下低压配电系统的电气安全.保护措施的测试、测量或监测用设备.第12部分:性能测量和 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) |
| IEC 61557-2-2007 | 1000V交流和小于1500V直流低压配电系统中的电气安全性.防护措施的试验、测量和监控设备.第2部分:绝缘阻抗 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
| IEC 61557-3-2007 | 1000V交流和小于1500V直流低压配电系统中的电气安全性.防护措施的试验、测量和监控设备.第3部分:回路阻抗 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance |
| IEC 61557-4-2007 | 1000V交流和小于1500V直流的低压配电系统的电气安全性.防护措试验、测量和监控设备.第4部分:接地和等效连接 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding |
| IEC 61557-5-2007 | 1000V交流和小于1500V直流低压配电系统中的电气安全性.防护措施的试验、测量和监控设备.第5部分:接地电阻 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth |
| IEC 61557-6-2007 | 小于1000V交流和1500V直流的低压配电系统中的电气安全.防护措施的测试、测量或监控用设备.第6部分:TT、TN和 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness residual current devices (RCD) in TT, TN and IT systems |
| IEC 61557-7-2007 | 1000V交流和小于1500V直流低压配电系统中的电气安全性.防护措施的试验、测量和监控设备.第7部分:相序 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence |
| IEC 61557-8 Corrigendum 1-2007 | 交流1000V和直流1500V以下低压配电系统中的电气安全.防护措施的测试、测量或监测用设备.第8部分:信息技术(I | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems; Corrigendum 1 |
| IEC 61557-8-2007 | 1000V交流和小于1500V直流低压配电系统中的电气安全性.防护措施的试验、测量和监控设备.第8部分:IT系统绝缘 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems |
| IEC 61557-9-2009 | 交流1000V和直流1500V以下低压配电系统中的电气安全性.防护措施的试验、测量或监控设备.第9部分:IT系统中的 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems |
| IEC 61660-1 Corrigendum 1-1999 | 电厂与变电站直流辅助设备中的短路电流.第1部分:短路电流的计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC 61660-1 Corrigendum 2-2000 | 电厂与变电站直流辅助设备中的短路电流.第1部分:短路电流的计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC 61660-1 Technical Corrigendum-1999 | 电厂和变电站中的直流辅助设备的短路电流.第1部分:短路电流的计算.技术勘误表 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents; Technical Corrigendum |
| IEC 61660-1-1997 | 电厂与变电站直流辅助设施中的短路电流 第1部分:短路电流的计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC 61660-2-1997 | 电厂与变电站直流辅助设施中的短路电流 第2部分:效应计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects |
| IEC 61788-1-2006 | 超导性.第1部分:临界电流测量.铌-钛复合超导体的临界直流电流 | Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors |
| IEC 61788-2-2006 | 超导性.第2部分:临界电流测量.Nb<下标3>Sn复合超导体的直流临界电流 | Superconductivity - Part 2: Critical current measurement - DC critical current of Nb<(Index)3>Sn composite superconductors |
| IEC 61788-3-2006 | 超导性.第3部分:临界电流测量.银和/或银合金铠装的铋-2212和铋-2223氧化物超导体的临界直流电流 | Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors |
| IEC 61800-1-1997 | 可调速电力传动系统 第1部分:一般要求 低压可调速直流电力传动系统的定额规范 | Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems |
| IEC 61803 Corrigendum 1-1999 | 高压直流(HVDC)变流站功率损失的测定 | Determination of power losses in high-voltage direct current (HVDC) converter stations |
| IEC 61803-1999 | 高压直流(HVDC)变流站功率损失的测定 | Determination of power losses in high-voltage direct current (HVDC) converter stations |
| IEC 61851-21-2001 | 电动车辆导电充电系统 第21部分：导电连接至交流/直流电源的电动车辆要求 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
| IEC 61992-1-2006 | 铁路设施.固定装置.直流开关设备.第1部分:总则 | Railway applications - Fixed installations - DC switchgear - Part 1: General |
| IEC 61992-2-2006 | 铁路设施.固定设备.直流开关设备.第2部分:直流断路器 | Railway applications - Fixed installations - DC switchgear - Part 2: DC circuit-breakers |
| IEC 61992-3-2006 | 铁路设施.固定装置.直流开关装置.第3部分:室内直流断路器,隔离开关和接地开关 | Railway applications - Fixed installations - DC switchgear - Part 3: Indoor d.c. disconnectors, switch-disconnectors and earthing switches |
| IEC 61992-4-2006 | 铁路设施.固定装置.直流开关装置.第4部分:露天直流断路器,隔离开关和接地开关 | Railway applications - Fixed installations - DC switchgear - Part 4: Outdoor d.c. disconnectors, switch-disconnectors and earthing switches |
| IEC 61992-5-2006 | 铁路设施.固定装置.直流开关装置.第5部分:直流系统中的特定用途用电涌放电器和低压限制器 | Railway applications - Fixed installations - DC switchgear - Part 5: Surge arresters and low-voltage limiters for specific use in d.c. systems |
| IEC 61992-6-2006 | 铁路设施.固定装置.直流开关装置.第6部分:直流开关组件 | Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies |
| IEC 61992-7-1-2006 | 铁路设施.固定装置.直流开关装置.第7-1部分:直流牵引系统中的特定用途用测量,控制和保护装置.应用手册 | Railway applications - Fixed installations - DC switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide |
| IEC 61992-7-2-2006 | 铁路设施.固定装置.直流开关装置.第7-2部分:直流牵引系统中的特定用途用测定,控制和保护装置.隔离换流器和 | Railway applications - Fixed installations - DC switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices |
| IEC 61992-7-3-2006 | 铁路应用.固定设施.直流开关装置.第7-3部分:直流牵引系统专门使用的测量,控制和保护装置.绝缘电压转换器和 | Railway applications - Fixed installations - DC switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices |
| IEC 62024-2-2008 | 高频感应元件.电气特性和测量方法.第2部分:直流对直流变流器用感应器的额定电流 | High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converter |
| IEC 62128-2-2003 | 铁路设施.固定设备.第2部分:由直流牵引系统产生的杂散电流影响的防护规定 | Railway applications - Fixed installations - Part 2: Protective provisions against the effects of stray currents caused by d.c. traction systems |
| IEC 62199-2004 | 直流装置套管 | Bushings for d.c. application |
| IEC 62384 AMD 1-2009 | LED 模块用直流或交流电子控制装置的性能要求,修改件1 | D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements; Amendment 1 |
| IEC 62384-2006 | 发光二极管模块的直流或交流电源电子控制装置.性能要求 | D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements |
| IEC 62386-206-2009 | 数字可寻址照明接口.第206部分:控制装置特殊要求.数字信号转换为直流电压信号(装置类型 5) | Digital addressable lighting interface - Part 206: Particular requirements for contol gears - Conversion from digital signal into d.c. voltage (device type 5) |
| IEC 62501-2009 | 高电压直流输电(HVDC)用电压源换流器(VSC)电子管.电气测试 | Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing |
| IEC/PAS 61975-2004 | 高压直流装置的系统试验 | System tests for high-voltage direct current (HVDC) installations |
| IEC/PAS 62344-2007 | 高压直流电(HVDC)连接(NPPAS)用地面电极设计的通用指南 | General guidelines for the design of ground electrodes for high-voltage direct current (HVDC) links (NPPAS) |
| IEC/PAS 62543-2008 | 用电压电源整流器的直流电传输 | DC transmission using voltage sourced converters |
| IEC/PAS 62544-2008 | 高压直流输电(HVDC)用有源滤波器 | Active filters in HVDC applications |
| IEC/TR 60344-2007 | 低频电缆和电线未涂层和涂层铜导线的直流电阻计算.应用指南 | Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide |
| IEC/TR 60919-2-2008 | 带线性通信转换器的高压直流(HVDC)系统性能.第2部分:故障和跳闸 | Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2: Faults and switching |
| IEC/TR 60919-3-1999 | 高压直流系统的性能 第３部分：动态 | Preformance of high-voltage direct current(HVDC)systems--Part3:Dynamic conditions |
| IEC/TR 60919-3-2009 | 带有线性整流转换器的高压直流(HVDC)系统的性能.第3部分:动态条件 | Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 3: Dynamic conditions |
| IEC/TR 61660-3-2000 | 电厂与变电站直流辅助设施中的短路电流 第3部分:计算举例 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 3: Examples of calculations |
| IEC/TR 62001-2009 | 高压直流系统(HVDC).交流滤波器规范和设计评价用指导手册 | High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of AC filters |
| IEC/TR2 61245-1993 | 直流系统用高压绝缘子的人工污秽试验 | Artificial pollution tests on high-voltage insulators to be used on d.c. systems |
| IEC/TS 60071-5-2002 | 绝缘配合.第5部分:高压直流电流变压器站的工作程序 | Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations |
| ISO 10133-2000 | 小艇 电气系统 超低压直流装置 | Small craft - Electrical systems - Extra-low-voltage d.c. installations |
| ISO 11452-7-2003 | 道路车辆.窄带辐射的电磁能量产生的电干扰的部件试验方法.第7部分:直流射频(RF)能注入 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection |
| ISO 7346-3-1996 | 水质 对淡水鱼(真骨总目、鲤科)急性致死物质毒性的测定 第3部分:直流法 | Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 3: Flow-through method |
| ISO 7398-1990 | 摩托车 直流闪光器 | Motorcycles; direct current flasher units |
| ISO 8052-1990 | 轻便摩托车 直流闪光器 | Mopeds; direct current flasher units |
| ISO 8818-1988 | 旅游居住车 旅居挂车 12 V 直流超低压电器设施 | Leisure accommodation vehicles; caravans; 12 V direct current extra low voltage electrical installations |
| ISO 8849-2003 | 小艇.电动直流舱底泵 | Small craft - Electrically operated direct-current bilge pumps |
| 编号 | 中文名称 | 英文名称 |