| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 13902-1-2004
| 牙科学.植入牙医学术语.第1部分:Endosseous牙科植入物系统
| Dentistry - Terminology of oral implantology - Part 1: Endosseous dental implant systems
|
| DIN 13902-2-2005
| 牙科学.口腔植入术术语.第2部分:仪器和牙科实验室部件
| Dentistry - Terminology of oral implantology - Part 2: Instruments and dental laboratory parts
|
| DIN 13902-3-2007
| 牙科学.口腔植入术术语.第2部分:临床术语
| Dentistry - Terminology of oral implantology - Part 3: Clinical terms
|
| DIN 13903-2005
| 牙科学.颌位记录材料
| Dentistry - Jaw relation recording material
|
| DIN 13905-1-2004
| 牙科学.牙科用炉.第1部分:用分离式热电偶进行温度测量的动态试验方法
| Dentistry - Dental furnace - Part 1: Dynamic test method for temperature measurement with separate thermocouple
|
| DIN 13905-2-2007
| 牙科学.牙科用炉.第2部分:通过烧釉评估炼炉程序的试验方法
| Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze
|
| DIN 13907-2007
| 牙科学.填充材料的聚合收缩应力
| Dentistry - Polymerisation shrinkage of filling materials
|
| DIN 13938-1-1986
| 牙科学；气吸设备；针头与针管的连接尺寸
| Dentistry; suction devices; fitting dimensions for canules and hose fittings
|
| DIN 13940-1-1990
| 牙科学.牙科手持器械.连接尺寸
| Dentistry; dental handpieces; coupling dimensions (ISO 3964:1982); german version EN 23964:1989
|
| DIN 13954-1-1990
| 牙科学；牙科旋转器械.牙铣头.第1部分:钢铣头
| Dentistry; dental rotary instruments; cutters; part 1: steel laboratory cutters (ISO 7787-1:1984); german version EN 27787-1:1990
|
| DIN 13971-2-2000
| 牙科学.正牙产品.第2部分:正牙学中固定弧形钢丝用附件
| Dentistry - Orthodontic products - Part 2: Attachments for seating archwires in orthodontics
|
| DIN 13972-1-2001
| 牙科技术.激光焊接过程的质量保证.第1部分:牙科实验室的激光焊接
| Dentistry - Quality assurance during laser welding - Part 1: Laser welding in dental laboratories
|
| DIN 13972-2-2002
| 牙科学.激光焊接质量保证.第2部分:激光焊接用相同和类似牙科金属材料适用性
| Dentistry - Quality assurance during laser welding - Part 2: Suitability of identical and similar metallic dental materials for laser welding
|
| DIN 13973-1-2001
| 牙科材料.耐磨性试验指南.第1部分:刷牙磨损
| Dental materials - Guidance on testing of wear resistance - Part 1: Wear by tooth brushing (ISO/TS 14569-1:1999)
|
| DIN 13999-1-1972
| 第1部分:牙科托盘
| Dental-Trays
|
| DIN 6856-3-2007
| 放射学底片影视箱和观察条件.第3部分:牙科用放射胶片影视箱
| Radiological film viewing boxes and viewing conditions - Part 3: Radiological film viewing boxes for dentistry
|
| DIN 6868-5-2001
| X光诊断图像质量保证.第5部分:牙科X光照相稳定性试验
| Image quality assurance in X-ray diagnostics - Part 5: Constancy testing in dental radiology
|
| DIN EN 1639-2004
| 牙科学.牙科用医疗器械.仪器
| Dentistry - Medical devices for dentistry - Instruments; German version EN 1639:2004
|
| DIN EN 1640-2004
| 牙科学.牙科用医疗器械.设备
| Dentistry - Medical devices for dentistry - Equipment; German version EN 1640:2004
|
| DIN EN 1641-2004
| 牙科学.牙科用医疗器械.材料
| Dentistry - Medical devices for dentistry - Materials; German version EN 1641:2004
|
| DIN EN 1642-2004
| 牙科学.牙科用医疗器械.牙科植入物
| Dentistry - Medical devices for dentistry - Dental implants; German version EN 1642:2004
|
| DIN EN 21942-1-1991
| 牙科术语.第1部分:通用及临床术语(ISO 1942-1:1989)
| Dental vocabulary; part 1: general and clinical terms (ISO 1942-1:1989); german version EN 21942-1:1991
|
| DIN EN 21942-2-1993
| 牙科学词汇.第2部分:牙科材料
| Dental vocabulary; part 2: dental materials (ISO 1942-2:1989); german version EN 21942-2:1992
|
| DIN EN 21942-3-1993
| 牙科词汇.第3部分:牙科器械
| Dental vocabulary; part 3: dental instruments (ISO 1942-3:1989); German version EN 21942-3:1993
|
| DIN EN 21942-4-1994
| 牙科术语.第4部分:牙科设备
| Dental vocabulary; part 4: dental equipment (ISO 1942-4:1989); German version EN 21942-4:1993
|
| DIN EN 27787-3-1994
| 牙科学.牙科旋转器械.切割工具.第3部分:铣床硬质合金刀具
| Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines (ISO 7787-3:1991); German version EN 27787-3:1993
|
| DIN EN 29168-1994
| 手持式牙科器械.软管连接件
| Dental handpieces - Hose connectors (ISO 9168:1991); German version EN 29168:1994
|
| DIN EN 61223-3-4-2001
| 医疗放射科评定和常规试验.第3-4部分:验收试验.牙科X射线设备的成像性能
| Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests; Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000); German version EN 61223-3-4:2000
|
| DIN EN ISO 10139-1 Berichtigung 1-2006
| 牙科学.活动假牙用软衬材料.第1部分:短期使用的材料.
| Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2005); German version EN ISO 10139-1:2005, Corrigenda to DIN EN ISO 10139-1:2005-05; German version EN ISO 10139-1:2005/AC:2006
|
| DIN EN ISO 10139-1-2005
| 牙科学.活动义齿软衬材料.第1部分:短期材料
| Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2005); German version EN ISO 10139-1:2005
|
| DIN EN ISO 10139-2-2001
| 牙科学.可摘义齿软衬料.第2部分:长期使用的材料
| Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:1999); German version EN ISO 10139-2:2001
|
| DIN EN ISO 10271 Berichtigung 1-2006
| 牙科金属材料.腐蚀试验方法
| Dental metallic materials - Corrosion test methods (ISO 10271:2001); German version EN ISO 10271:2001, Corrigenda to DIN EN ISO 10271:2002-01; German version EN ISO 10271:2001/AC:2006
|
| DIN EN ISO 10271-2002
| 牙科金属材料.腐蚀试验方法
| Dental metallic materials - Corrosion test methods (ISO 10271:2001); German version EN ISO 10271:2001
|
| DIN EN ISO 10323-1995
| 牙科旋转器械.盘片和轮内径
| Dental rotary instruments - Bore diameters for discs and wheels (ISO 10323:1991); German version EN ISO 10323:1995
|
| DIN EN ISO 10477-2005
| 牙科学.高聚物基的牙冠和齿桥材料
| Dentistry - Polymer-based crown and bridge materials (ISO 10477:2004); German version EN ISO 10477:2004
|
| DIN EN ISO 10637-2001
| 牙科设备.高容量和中容量抽吸系统:德文版本 EN ISO 10637:2000
| Dental equipment - High- and medium-volume suction systems (ISO 10637:1999); German version EN ISO 10637:2000
|
| DIN EN ISO 10650-1-2006
| 牙科学.动力聚合活化剂.第1部分:石英钨卤素灯
| Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps (ISO 10650-1:2004); German version EN ISO 10650-1:2005
|
| DIN EN ISO 10650-2-2007
| 牙科学.动力聚合活化剂.第2部分:发光二极管(LED)灯
| Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps (ISO 10650-2:2007); German version EN ISO 10650-2:2007
|
| DIN EN ISO 11143-2002
| 牙科设备.汞齐合金分离器 (ISO 11143:1999 + 修改件 1:2002) (包括技术勘误 AC:2002); 德文版本 EN ISO 111
| Dental equipment - Amalgam separators (ISO 11143:1999 + Cor.1:2002) (includes corrigendum AC:2002); German version EN ISO 11143:1999 + AC:2002
|
| DIN EN ISO 11144-1996
| 牙科设备.给排水管接头
| Dental equipment - Connections for supply and waste lines (ISO 11144:1995); German version EN ISO 11144:1996
|
| DIN EN ISO 11498-1999
| 牙科手持器械.牙科用低压电动机
| Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997); German version EN ISO 11498:1999
|
| DIN EN ISO 11499-2007
| 牙科学.局部麻醉用一次性盒(ISO 11499:2007)
| Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2007); German version EN ISO 11499:2007
|
| DIN EN ISO 11609-1998
| 牙科学.牙膏.要求,试验方法和标记
| Dentistry - Toothpastes - Requirements, test methods and marking (ISO 11609:1995); German version EN ISO 11609:1998
|
| DIN EN ISO 13295-2007
| 牙科学.旋转器械用心轴(ISO 13295:2007)
| Dentistry - Mandrels for rotary instruments (ISO 13295:2007); German version EN ISO 13295:2007
|
| DIN EN ISO 13397-2-2005
| 牙科学.牙周刮匙、牙刮器和牙挖器.第2部分:Gr型牙周刮匙
| Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type (ISO 13397-2:2005); German version EN ISO 13397-2:2005
|
| DIN EN ISO 13402-2001
| 外科和牙科手持器械.耐蒸汽消毒、耐腐蚀和耐热暴露性能的测定
| Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995); German version EN ISO 13402:2000
|
| DIN EN ISO 13716-2000
| 牙科学.可逆和不可逆水解胶体印模材料系统
| Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999); German version EN ISO 13716:2000
|
| DIN EN ISO 13897-2004
| 牙科学.汞齐合金胶囊
| Dentistry - Amalgam capsules (ISO 13897:2003); German version EN 13897:2004
|
| DIN EN ISO 14233-2003
| 牙科学.聚合基模具材料
| Dentistry - Polymer-based die materials (ISO 14233:2003); German version EN ISO 14233:2003
|
| DIN EN ISO 14356-2003
| 牙科学.复制材料
| Dentistry - Duplicating material (ISO 14356:2003); German version EN ISO 14356:2003
|
| DIN EN ISO 14801-2003
| 牙科学.牙科植入物的疲劳试验
| Dentistry - Fatigue test for endosseous dental implants (ISO 14801:2003); German version EN ISO 14801:2003
|
| DIN EN ISO 15087-1-2002
| 牙科起子.第1部分:一般要求(ISO 15087-1:1999); 德文版本 EN ISO 15087-1:2001
| Dental elevators - Part 1: General requirements (ISO 15087-1:1999); German version EN ISO 15087-1:2001
|
| DIN EN ISO 15087-2-2000
| 牙科起子.第2部分:沃里克·吉姆斯起子 (ISO 15087-2:2000); 德文版本 EN ISO 15087-2:2000
| Dental elevators - Part 2: Warwick James elevators (ISO 15087-2:2000); German version EN ISO 15087-2:2000
|
| DIN EN ISO 15087-3-2000
| 牙科起子.第3部分:格雷尔(Cryer)起子 (ISO 15087-3:2000); 德文版本 EN ISO 15087-3:2000
| Dental elevators - Part 3: Cryer elevators (ISO 15087-3:2000); German version EN ISO 15087-3:2000
|
| DIN EN ISO 15087-4-2000
| 牙科起子.第4部分:古普兰(Coupland)起子 (ISO 15087-4:2000); 德文版本 EN ISO 15087-4:2000
| Dental elevators - Part 4: Coupland elevators (ISO 15087-4:2000); German version EN ISO 15087-4:2000
|
| DIN EN ISO 15087-5-2000
| 牙科起子.第5部分:贝恩(Bein)起子 (ISO 15087-5:2000); 德文版本 EN ISO 15087-5:2000
| Dental elevators - Part 5: Bein elevators (ISO 15087-5:2000); German version EN ISO 15087-5:2000
|
| DIN EN ISO 15087-6-2000
| 牙科起子.第6部分:弗洛(Flohr)起子 (ISO 15087-6:2000); 德文版本 EN ISO 15087-6:2000
| Dental elevators - Part 6: Flohr elevators (ISO 15087-6:2000); German version EN ISO 15087-6:2000
|
| DIN EN ISO 15098-1-2001
| 牙科镊子.第1部分:一般要求 (ISO 15098-1:1999); 德文版本 EN ISO 15098-1:2001
| Dental tweezers - Part 1: General requirements (ISO 15098-1:1999); German version EN ISO 15098-1:2001
|
| DIN EN ISO 15098-2-2000
| 牙科镊子.第2部分:梅利阿姆(Meriam)型 (ISO 15098-2:2000); 德文版本 EN ISO 15098-2:2000
| Dental tweezers - Part 2: Meriam types (ISO 15098-2:2000); German version EN ISO 15098-2:2000
|
| DIN EN ISO 15098-3-2000
| 牙科镊子.第3部分:学院型 (ISO 15098-3:2000); 德文版本 EN ISO 15098-3:2000
| Dental tweezers - Part 3: College types (ISO 15098-3:2000); German version EN ISO 15098-3:2000
|
| DIN EN ISO 1567-2000
| 牙科学-假牙基料聚合物
| Dentistry - Denture base polymers (ISO 1567:1999); German version EN ISO 1567:2000
|
| DIN EN ISO 15841-2007
| 牙科学.畸齿矫正用金属线(ISO 15841-2006)
| Dentistry - Wires for use in orthodontics (ISO 15841:2006); English version of DIN EN ISO 15841:2007-01
|
| DIN EN ISO 15854-2005
| 牙科学.铸型蜡和假牙托蜡
| Dentistry - Casting and baseplate waxes (ISO 15854:2005); German version EN ISO 15854:2005
|
| DIN EN ISO 15912-2007
| 牙科.铸件包模料和耐火硬模材料(ISO 15912-2006)
| Dentistry - Casting investments and refractory die materials (ISO 15912:2006); English version of DIN EN ISO 15912:2007-01
|
| DIN EN ISO 16408-2004
| 牙科学.口腔卫生产品.口腔清洗
| Dentistry - Oral hygiene products - Oral rinses (ISO 16408:2004) German version EN ISO 16408:2004
|
| DIN EN ISO 16409-2007
| 牙科学.口腔卫生制品.手动牙间刷(ISO 16409-2006)
| Dentistry - Oral hygiene products - Manual interdental brushes (ISO 16409:2006); English version of DIN EN ISO 16409:2007-01
|
| DIN EN ISO 1797-1-1999
| 牙科旋转器具.柄.第1部分:金属柄
| Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992 + AMD 1:1997) including Amendment A1:1999; German version EN ISO 1797-1:1995 + A1:1999
|
| DIN EN ISO 1797-2-1995
| 牙科旋转器具.柄.第2部分:塑料柄
| Dental rotary instruments - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992); German version EN ISO 1797-2:1995
|
| DIN EN ISO 1942-5-1994
| 牙科词汇.第5部分:试验术语 (ISO 1942-5:1989); 德文版本 EN ISO 1942-5:1994
| Dental vocabulary - Part 5: Terms associated with testing (ISO 1942-5:1989); German version EN ISO 1942-5:1994
|
| DIN EN ISO 20126-2005
| 牙科学.手动牙刷.一般要求和试验方法.(ISO 20126-2005); 德文版本 EN ISO 20126-2005
| Dentistry - Manual toothbrushes - General requirements and test methods (ISO 20126:2005); German version EN ISO 20126:2005
|
| DIN EN ISO 20127-2005
| 牙科学.电动牙刷.一般要求和试验方法
| Dentistry - Powered toothbrushes - General requirements and test methods (ISO 20127:2005); German version EN ISO 20127:2005
|
| DIN EN ISO 21530-2004
| 牙科学.牙科器械表面用材料.耐化学消毒剂的测定
| Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004); German version EN ISO 21530:2004
|
| DIN EN ISO 21533-2003
| 牙科学.韧带内注射用可重复使用的管式注射器
| Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003); German version EN ISO 21533:2003
|
| DIN EN ISO 2157-1995
| 牙科旋转器械.公称直径和命名代码
| Dental rotary instruments - Nominal diameters and designation code number (ISO 2157:1992); German version EN ISO 2157:1995
|
| DIN EN ISO 21606-2007
| 牙科.正畸学用弹性体辅助装置
| Dentistry - Elastomeric auxiliaries for use in orthodontics (ISO 21606:2007); German version EN ISO 21606:2007
|
| DIN EN ISO 21671-2006
| 牙科学.旋转抛光器(ISO 21671:2006)
| Dentistry - Rotary polishers (ISO 21671:2006); English version of DIN EN ISO 21671:2006-10
|
| DIN EN ISO 22112-2006
| 牙科学.牙修复术用假牙(ISO 22112-2005)
| Dentistry - Artificial teeth for dental prostheses (ISO 22112:2005); English version of DIN EN ISO 22112:2006-05
|
| DIN EN ISO 22254-2005
| 牙科.手控牙刷.毛刷部分耐弯曲性
| Dentistry - Manual toothbrushes - Resistance of tufted portion to deflection (ISO 22254:2005); German version EN ISO 22254:2005
|
| DIN EN ISO 22374-2005
| 牙科学.牙钻手柄.电动刮器和刮器梢尖(ISO 22374-2005); 德文版本 EN ISO 22374-2005
| Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips (ISO 22374:2005); German version EN ISO 22374:2005
|
| DIN EN ISO 22674-2007
| 牙科.固定和可移动复位的金属材料和器具
| Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2006); English version of DIN EN ISO 22674:2007-02
|
| DIN EN ISO 22794-2007
| 牙科.口腔和上颌面外科中骨填充物和增加物用可植入材料.技术文档内容
| Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007); German version EN ISO 22794:2007
|
| DIN EN ISO 22803-2006
| 牙科学.口腔及颌面外科中受控制的组织再生用薄膜材料.技术文档的内容
| Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004); German version EN ISO 22803:2005
|
| DIN EN ISO 24234-2005
| 牙医学.牙科用汞齐合金用汞及合金
| Dentistry - Mercury and alloys for dental amalgam (ISO 24234:2004); German version EN ISO 24234:2004
|
| DIN EN ISO 3107 Berichtigung 1-2006
| 牙科学.氧化锌/丁香酚和氧化锌/非丁香酚粘固粉
| Dentistry - Zinc oxide/eugenol and zinc oxide/non-eugenol cements (ISO 3107:2004); German version EN ISO 3107:2004, Corrigenda to DIN EN ISO 3107:2005-01; German version EN ISO 3107:2004/AC:2006
|
| DIN EN ISO 3823-1-1999
| 牙科旋转器械.牙钻.第1部分:钢制牙钻和硬质合金牙钻
| Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823-1:1997); German version EN ISO 3823-1:1998
|
| DIN EN ISO 3823-2-2003
| 牙科.旋转牙钻器械.第2部分:精加工牙钻
| Dentistry - Rotary bur instruments - Part 2: Finishing burs (ISO 3823-2:2003); German version EN ISO 3823-2:2003
|
| DIN EN ISO 3950-1997
| 牙科学.牙齿和口腔区的命名制度
| Dentistry - Designation system for teeth and areas of the oral cavity (ISO 3950:1995); German version EN ISO 3950:1997
|
| DIN EN ISO 4049-2001
| 牙科学.聚合物填充物、修复及粘接材料
| Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000); German version EN ISO 4049:2000
|
| DIN EN ISO 4073-2005
| 牙科设备.牙科治疗室设备项目.识别体系
| Dental equipment - Items of dental equipment at the working place - Identification system (ISO 4073:1980); German version EN ISO 4073:2005
|
| DIN EN ISO 4823-2007
| 牙科.弹性印模材料
| Dentistry - Elastomeric impression materials (ISO 4823:2000+Cor. 1:2004+Amd.1:2007); German version EN ISO 4823:2000+AC:2006+A1:2007
|
| DIN EN ISO 6360-2-2005
| 牙科学.旋转器械用数字编码体系.第2部分:形状
| Dentistry - Number coding system for rotary instruments - Part 2: Shapes (ISO 6360-2:2004); German version EN ISO 6360-2:2004
|
| DIN EN ISO 6360-3-2006
| 牙科学.旋转器械的数字编码系统.第3部分:磨石和刀具的具体特性(ISO 6360-3-2005).德文版本EN ISO 6360-3:20
| Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters (ISO 6360-3:2005); German version EN ISO 6360-3:2005
|
| DIN EN ISO 6360-4-2004
| 牙科学.旋转器械的数字编码体系.第4部分:金刚石器械的特性
| Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments (ISO 6360-4:2004); German version EN ISO 6360-4:2004
|
| DIN EN ISO 6360-6-2004
| 牙科学.旋转器械的数字编码体系.第6部分:磨削器械特性
| Dentistry - Number coding system for rotary instruments - Part 6: Specific characteristics of abrasive instruments (ISO 6360-6:2004); German version EN ISO 6360-6:2004
|
| DIN EN ISO 6360-7-2006
| 牙科学.旋转器械的数字编码系统.第7部分:心轴和特殊仪器的特殊特性(ISO 6360-7:2006)
| Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments (ISO 6360-7:2006); English version of DIN EN ISO 6360-7:2006-05
|
| DIN EN ISO 6872-1999
| 牙科烤瓷
| Dental ceramic (ISO 6872:1995 including Amendment 1:1997); German version EN ISO 6872:1998
|
| DIN EN ISO 6873-2000
| 牙科用石膏制品
| Dental gypsum products (ISO 6873:1998); German version EN ISO 6873:2000
|
| DIN EN ISO 6874-2005
| 牙科学.树脂基窝沟和裂纹封闭剂
| Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2005); German version EN ISO 6874:2005
|
| DIN EN ISO 6875-1996
| 牙科设备.牙医椅
| Dental equipment - Dental patient chair (ISO 6875:1995); German version EN ISO 6875:1996
|
| DIN EN ISO 6876-2003
| 牙科牙根管充填材料
| Dental root canal sealing materials (ISO 6876:2001); German version EN ISO 6876:2002
|
| DIN EN ISO 6877-2006
| 牙科.牙根管充填针(ISO 6877:2006)
| Dentistry - Root-canal obturating points (ISO 6877:2006) English version of DIN EN ISO 6877:2006-07
|
| DIN EN ISO 7405-1998
| 牙科学.牙科医疗器械生物相容性临床前评价.牙科材料试验方法
| Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials (ISO 7405:1997); German version EN ISO 7405:1997
|
| DIN EN ISO 7488-1995
| 牙科用混汞器 (ISO 7488:1991); 德文版本 EN ISO 7488:1995
| Dental amalgamators (ISO 7488:1991); German version EN ISO 7488:1995
|
| DIN EN ISO 7491-2001
| 牙科材料.色稳定性的测定
| Dental materials - Determination of colour stability (ISO 7491:2000); German version EN ISO 7491:2000
|
| DIN EN ISO 7492-1998
| 牙科探针
| Dental explorers (ISO 7492:1997); German version EN ISO 7492:1998
|
| DIN EN ISO 7493-2006
| 牙科医生用椅
| Dentistry - Operator's stool (ISO 7493:2006); German version EN ISO 7493:2006
|
| DIN EN ISO 7494-1-2005
| 牙科学.牙科装置.第1部分:一般要求和试验方法
| Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-1:2004); German version EN ISO 7494-1:2005
|
| DIN EN ISO 7494-2-2003
| 牙科学.牙科综合治疗设备.第2部分:水和气的供给
| Dentistry - Dental units - Part 2: Water and air supply (ISO 7494-2:2003); German version EN ISO 7494-2:2003
|
| DIN EN ISO 7551-1998
| 牙科吸收点
| Dental absorbent points (ISO 7551:1996); German version EN ISO 7551:1998
|
| DIN EN ISO 7711-1-1998
| 牙科旋转器械.金刚钻器具.第1部分:尺寸、要求、标记和包装
| Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997); German version EN ISO 7711-1:1998
|
| DIN EN ISO 7711-2-1995
| 牙科旋转器械.金刚钻器具.第2部分:圆盘刀
| Dental rotary instrument - Diamond instruments - Part 2: Discs (ISO 7711-2:1992); German version EN ISO 7711-2:1995
|
| DIN EN ISO 7785-1-1999
| 手持式牙科器械.第1部分:高速空气涡轮手持器械
| Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997); German version EN ISO 7785-1:1999
|
| DIN EN ISO 7785-2-1998
| 手持式牙科器械.第2部分:平角和啮合角手持式器械
| Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995); German version EN ISO 7785-2:1997
|
| DIN EN ISO 7786-2001
| 牙科用旋转器械.实验室研磨器械:德文版本 EN ISO 7786:2001
| Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:2001); German version EN ISO 7786:2001
|
| DIN EN ISO 7787-2-2001
| 牙科用旋转器械.刀具.第2部分:实验室用硬质合金刀具(ISO 7787-2:2000):德文版本 EN ISO 7787-2:2000
| Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000); German version EN ISO 7787-2:2000
|
| DIN EN ISO 7787-4-2002
| 牙科用旋转器械.刀具.第4部分:试验室用微型硬质合金刀具 (ISO 7787-4:2002); 德文版本 EN ISO 7787-4:2002
| Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002); German version EN ISO 7787-4:2002
|
| DIN EN ISO 7885-2001
| 一次性无菌牙科用注射针头
| Sterile dental injection needles for single-use (ISO 7885:2000); German version EN ISO 7885:2000
|
| DIN EN ISO 9173-1-2006
| 牙科.拔牙钳.第1部分:一般要求和试验方法
| Dentistry - Extraction forceps - Part 1: General requirements and test methods (ISO 9173-1:2006); English version of DIN EN ISO 9173-1:2006-09
|
| DIN EN ISO 9333-2006
| 牙科学.硬钎焊材料(ISO 9333:2006)
| Dentistry - Brazing materials (ISO 9333:2006); English version of DIN EN ISO 9333:2006-10
|
| DIN EN ISO 9680-2007
| 牙科.工作灯(ISO 9680:2007)
| Dentistry - Operating lights (ISO 9680:2007); German version EN ISO 9680:2007
|
| DIN EN ISO 9687-1995
| 牙科设备.图形符号 (ISO 9687:1993); 德文版本 EN ISO 9687:1995
| Dental equipment - Graphical symbols (ISO 9687:1993); German version EN ISO 9687:1995
|
| DIN EN ISO 9693-2000
| 牙科金属烤瓷修复材料的熔合
| Dental ceramic fused to metal restorative materials (ISO 9693:1999); German version EN ISO 9693:2000
|
| DIN EN ISO 9873-2000
| 牙科用手持器械.可重复使用的牙科镜和手柄:德文版本 EN ISO 9873:2000
| Dental hand instruments - Reusable mirrors and handles (ISO 9873:1998); German version EN ISO 9873:2000
|
| DIN EN ISO 9917-2-1999
| 牙科用水基胶粘剂.第2部分:光敏胶粘剂
| Dental water-based cements - Part 2: Light-activated cements (ISO 9917-2:1998); German version EN ISO 9917-2:1999
|
| DIN EN ISO 9997-2000
| 牙科卡式注射器(ISO 9997:1999);德文版本 EN ISO 9997:1999
| Dental cartridge syringes (ISO 9997:1999); German version EN ISO 9997:1999
|
| DIN ISO 11040-1-1993
| 带药注射器.第1部分:牙科局部麻醉药筒用玻璃筒
| Prefilled syringes; glass cylinders for dental local anaesthetic cartridges; identical with ISO 11040-1:1992
|
| DIN ISO 11040-2-1995
| 预灌装注射器.第2部分:牙科局部麻醉器玻璃管柱塞和盘柄
| Prefilled syringes - Part 2: Plungers and discs for dental local anaesthetic cartridges (ISO 11040-2:1994)
|
| DIN ISO 11040-3-1993
| 带药注射器.牙科局部麻醉瓶用铅盖
| Prefilled syringes; aluminium caps for dental local anaesthetic cartridges; identical with ISO 11040-3:1993
|
| DIN V 13974-2003
| 牙科.牙科装置和附件分类的指南
| Dentistry - Guidance on the classification of dental devices and accessories (Technical Report CEN/TR 12401:2003)
|
| DIN V 6868-151-2002
| X光片质量保证.第151部分:牙科X射线设备验收检验.安装、维护和修整后照片质量的检查原则
| Image quality assurance in X-ray diagnostics - Part 151: Acceptance testing of dental radiographic equipment; Rules for the inspection of image quality after installation, maintenance and modification
|
| 编号 | 中文名称 | 英文名称 |
|---|