ISO牙科标准(ISO dental standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
IEC 61223-2-7-1999 医用成像部门的评价及例行试验 第2-7部分:稳定性试验 牙科X射线设备(不包括全景设备) Evaluation and routine testing in medical imaging departments - Part 2-7: Constancy tests - Equipment for intra-oral dental radiography excluding dental panoramic equipment
IEC 61223-3-4-2000 医用成像部门的评价及例行试验 第3-4部分:验收试验 牙科X射线设备图像性能 Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests - Imaging performance of dental X-ray equipment
ISO 10139-1 Technical Corrigendum 1-2006 牙科学.活动假牙用软衬材料.第1部分:短期使用的材料.技术勘误1 Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use; Technical Corrigendum 1
ISO 10139-1-2005 牙科学.活动义齿用软衬材料.第1部分:短期材料 Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use
ISO 10139-2-1999 牙科学 活动义齿软衬材料 第2部分:长期使用的材料 Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use
ISO 10271 Technical Corrigendum 1-2005 牙科金属材料.抗腐蚀试验方法.技术勘误1 Dental metallic materials - Corrosion test methods; Technical Corrigendum 1
ISO 10271-2001 牙科金属材料 抗腐蚀试验方法 Dental metallic materials - Corrosion test methods
ISO 10323-1991 牙科旋转器械 切盘和轮的内径 Dental rotary instruments; bore diameters for discs and wheels
ISO 10451-2002 牙科植入系统.技术文件内容 Dental implant system - Contents of technical file
ISO 10477-2004 牙科学.高聚物基的牙冠和齿桥材料 Dentistry - Polymer-based crown and bridge materials
ISO 10637-1999 牙科设备 高和中容量抽吸系统 Dental equipment - High- and medium-volume suction systems
ISO 10650-1-2004 牙科学.动力聚合活化剂.第1部分:石英钨卤素灯 Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps
ISO 10650-2-2007 牙科学.动力聚合活化剂.第2部分:发光二极管(LED)灯 Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps
ISO 11143-1999 牙科设备 汞齐合金分离器 Dental equipment - Amalgam separators
ISO 11144-1995 牙科设备 供水及排水管接头 Dental equipment - Connections for supply and waste lines
ISO 11244-1998 牙科钎焊包埋料 Dental brazing investments
ISO 11498-1997 牙科手机 牙科用低压电动机 Dental handpieces - Dental low-voltage electrical motors
ISO 11499-2007 牙科学.局部麻醉用一次性盒 Dentistry - Single-use cartridges for local anaesthetics
ISO 11609-1995 牙科学 牙膏 要求、试验方法和标志 Dentistry - Toothpastes - Requirements, test methods and marking
ISO 13294-1997 牙科手机 牙钻气动机 Dental handpieces - Dental air-motors
ISO 13295-2007 牙科学.旋转器械用心轴 Dentistry - Mandrels for rotary instruments
ISO 13397-2-2005 牙科学.牙周刮匙、牙刮器和牙挖器.第2部分:Gr型牙周刮匙 Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type
ISO 13402-1995 外科和牙科手持器械 耐蒸气清毒、耐腐蚀和耐热性能的测定 Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure
ISO 13716-1999 牙科学 可逆和不可逆水解胶体印模材料系统 Dentistry - Reversible-irreversible hydrocolloid impression material systems
ISO 13897 Technical Corrigendum 1-2003 牙科学.汞齐合金胶囊.技术勘误1 Dentistry - Amalgam capsules; Technical Corrigendum 1
ISO 13897-2003 牙科学.汞齐合金胶囊 Dentistry - Amalgam capsules
ISO 14233-2003 牙科学.聚合基模具材料 Dentistry - Polymer-based die materials
ISO 14356-2003 牙科学.复制材料 Dentistry - Duplicating material
ISO 15087-1-1999 牙科起子 第1部分:一般要求 Dental elevators - Part 1: General requirements
ISO 15087-2-2000 牙科起子 第2部分:沃里克吉姆斯起子 Dental elevators - Part 2: Warwick James elevators
ISO 15087-3-2000 牙科起子 第3部分:CRYER起子 Dental elevators - Part 3: Cryer elevators
ISO 15087-4-2000 牙科起子 第4部分:COUPLAND起子 Dental elevators - Part 4: Coupland elevators
ISO 15087-5-2000 牙科起子 第5部分:BEIN起子 Dental elevators - Part 5: Bein elevators
ISO 15087-6-2000 牙科起子 第6部分:FLOHR起子 Dental elevators - Part 6: Flohr elevators
ISO 15098-1-1999 牙科镊子 第1部分:一般要求 Dental tweezers - Part 1: General requirements
ISO 15098-2-2000 牙科镊子 第2部分:Meriam型 Dental tweezers - Part 2: Meriam types
ISO 15098-3-2000 牙科镊子 第3部分:学院型 Dental tweezers - Part 3: College types
ISO 15606-1999 牙科手机 气动刮器和刮器梢尖 Dental handpieces - Air-powered scalers and scaler tips
ISO 1564-1995 牙科琼脂基水胶仿印模材料 Dental aqueous impression materials based on agar
ISO 1567 AMD 1-2003 牙科学.义齿基托聚合物.修改件1 Dentistry - Denture base polymers; Amendment 1
ISO 1567-1999 牙科学 义齿基托聚合物 Dentistry - Denture base polymers
ISO 15841-2006 牙科学.畸齿矫正用金属线 Dentistry - Wires for use in orthodontics
ISO 15854-2005 牙科学.铸型蜡和假牙托塑性材料 Dentistry - Casting and baseplate waxes
ISO 15912-2006 牙科.铸件研究和耐火硬模材料 Dentistry - Casting investments and refractory die materials
ISO 16059-2007 牙科学.数据交换用汇编必需的要素 Dentistry - Required elements for codification used in data exchange
ISO 16408-2004 牙科学.口腔卫生制品.口腔冲洗 Dentistry - Oral hygiene products - Oral rinses
ISO 16409-2006 牙科学.口腔卫生制品.手动牙刷 Dentistry - Oral hygiene products - Manual interdental brushes
ISO 1797-1 AMD 1-1997 牙科旋转器械 柄 第1部分:金属柄 修改1 Dental rotary instruments - Shanks - Part 1: Shanks made of metals; Amendment 1
ISO 1797-1-1992 牙科旋转器械 柄 第1部分:金属柄 Dental rotary instruments; shanks; part 1: shanks made of metals
ISO 1797-2-1992 牙科旋转器械 柄 第2部分:塑料柄 Dental rotary instruments; shanks; part 2: shanks made of plastics
ISO 1942-1 AMD 1-1992 牙科词汇 第1部分:通用及临床术语 修改1 两种语言版 Dental vocabulary; part 1: general and clinical terms; amendment 1
ISO 1942-1 AMD 2-1992 牙科词汇 第1部分:通用及临床术语 修改2 两种语言版 Dental vocabulary; part 1: general and clinical terms; amendment 2
ISO 1942-1 AMD 3-1993 牙科词汇.第1部分:一般和临床术语.修改件3 Dental vocabulary; part 1: general and clinical terms; amendment 3
ISO 1942-1 AMD 5-1993 牙科词汇 第1部分:通用及临床术语 修改5 两种语言版 Dental vocabulary; part 1: general and clinical terms; amendment 5
ISO 1942-1-1989 牙科词汇 第1部分:通用及临床术语 两种语言版 Dental vocabulary; part 1: general and clinical terms
ISO 1942-2 AMD 1-1992 牙科词汇 第2部分:牙科材料 修改1 两种语言版 Dental vocabulary; part 2: dental materials; amendment 1
ISO 1942-2 AMD 2-1992 牙科词汇 第2部分:牙科材料 修改2 两种语言版 Dental vocabulary; part 2: dental materials; amendment 2
ISO 1942-2-1989 牙科词汇 第2部分:牙科材料 两种语言版 Dental vocabulary; part 2: dental materials
ISO 1942-3 AMD 1-1992 牙科词汇 第3部分:牙科器械 修改1 两种语言版 Dental vocabulary; part 3: dental instruments; amendment 1
ISO 1942-3 AMD 2-1992 牙科词汇 第3部分:牙科器械 修改2 两种语言版 Dental vocabulary; part 3: dental instruments; amendment 2
ISO 1942-3-1989 牙科词汇 第3部分:牙科器械 两种语言版 Dental vocabulary; part 3: dental instruments
ISO 1942-4 AMD 1-1992 牙科词汇 第4部分:牙科设备 修改1 两种语言版 Dental vocabulary; part 4: dental equipment; amendment 1
ISO 1942-4-1989 牙科词汇 第4部分:牙科设备 两种语言版 Dental vocabulary; part 4: dental equipment
ISO 1942-5-1989 牙科词汇 第5部分:试验术语 两种语言版 Dental vocabulary; part 5: terms associated with testing
ISO 20126-2005 牙科学.手动牙刷.一般要求和试验方法 Dentistry - Manual toothbrushes - General requirements and test methods
ISO 20127-2005 牙科.电动牙刷.一般要求和试验方法 Dentistry - Powered toothbrushes - General requirements and test methods
ISO 21530-2004 牙科学.牙科设备表面用材料.耐化学消毒剂的测定 Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants
ISO 21533-2003 牙科.韧带内注射用可重复使用的管式注射器 Dentistry - Reusable cartridge syringes intended for intraligamentary injections
ISO 2157-1992 牙科旋转器械 公称直径和命名代码 Dental rotary instruments; nominal diameters and designation code number
ISO 21606-2007 牙科学.正畸学用弹性体辅助装置 Dentistry - Elastomeric auxiliaries for use in orthodontics
ISO 21671-2006 牙科学.旋转抛光器 Dentistry - Rotary polishers
ISO 22112-2005 牙科学.牙修复术用假牙 Dentistry - Artificial teeth for dental prostheses
ISO 22254-2005 牙科学.手动牙刷.毛刷部分耐弯曲性能 Dentistry - Manual toothbrushes - Resistance of tufted portion to deflection
ISO 22374-2005 牙科学.牙钻手柄.电动刮器和刮器梢头 Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips
ISO 22674-2006 牙科.固定式和可摘式修复体和牙科器具用金属材料 Dentistry - Metallic materials for fixed and removable restorations and appliances
ISO 22794-2007 牙科学.口腔和上颌面外科中骨填充物和增加物用植入材料.技术文档内容 Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file
ISO 22803-2004 牙科学.口腔及颌面外科中受控制的组织再生用薄膜材料.技术文档的内容 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
ISO 24234-2004 牙科学.牙科汞齐合金用汞及合金 Dentistry - Mercury and alloys for dental amalgam
ISO 3107 Technical Corrigendum 1-2006 牙科.氧化锌/丁香酚和氧化锌/不含丁香酚的氧化锌粘固粉.技术勘误1 Dentistry - Zinc oxide/eugenol and zinc oxide/non-eugenol cements; Technical Corrigendum 1
ISO 3107-2004 牙科学.氧化锌/丁香酚及不含丁香酚的氧化锌粘固粉 Dentistry - Zinc oxide/eugenol and zinc oxide/non-eugenol cements
ISO 3665-1996 摄影 牙科用射线照相胶片 规范 Photography - Intra-oral dental radiographic film - Specification
ISO 3823-1-1997 牙科旋转器械 牙钻 第1部分:不锈钢牙钻和硬质合金牙钻 Dental rotary instruments - Burs - Part 1: Steel and carbide burs
ISO 3823-2-2003 牙科.旋转牙钻器械.第2部分:精加工牙钻 Dentistry - Rotary bur instruments - Part 2: Finishing burs
ISO 3950-1984 牙科学.牙齿和口腔区的名称与符号体系 Dentistry - Designation system for teeth and areas of the oral cavity
ISO 3964-1982 牙科手机 连接尺寸 Dental handpieces; Coupling dimensions
ISO 4049-2000 牙科学 聚合物基充填、修复及粘接材料 Dentistry - Polymer-based filling, restorative and luting materials
ISO 4073-1980 牙科设备 牙科治疗室设备项目 识别体系 Dental equipment; Items of dental equipment at the working place; Identification system
ISO 4823 AMD 1-2007 牙科学.弹性印模材料.修改件1 Dentistry - Elastomeric impression materials; Amendment 1
ISO 4823 Technical Corrigendum 1-2004 牙科学.弹性印模材料.技术勘误1 Dentistry - Elastomeric impression materials; Technical Corrigendum 1
ISO 4823-2000 牙科学 弹性体印模材料 Dentistry - Elastomeric impression materials
ISO 5799-1991 摄影 医用和牙科用直接爆光射线摄影胶片/处理系统 ISO感光速度和ISO平均梯度的测定 Photography; direct-exposing medical and dental radiographic film/process systems; determination of ISO speed and ISO average gradient
ISO 6360-1 Technical Corrigendum 1-2007 牙科.旋转仪器的数字编码系统.第1部分:一般特性.技术勘误1 Dentistry - Number coding system for rotary instruments - Part 1: General characteristics; Technical Corrigendum 1
ISO 6360-1-2004 牙科学.牙科旋转器械的数字编码体系.第1部分:一般特性 Dentistry - Number coding system for rotary instruments - Part 1: General characteristics
ISO 6360-2-2004 牙科学.旋转器械用数字编码体系.第2部分:形状 Dentistry - Number coding system for rotary instruments - Part 2: Shapes
ISO 6360-3-2005 牙科学.旋转器械的数字编码系统.第3部分:磨石和刀具的具体特性 Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters
ISO 6360-4-2004 牙科学.旋转器械的数字编码体系.第4部分:金刚石器械的具体特性 Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments
ISO 6360-6-2004 牙科学.旋转器械的数字编码体系.第6部分:研磨器械的具体特性 Dentistry - Number coding system for rotary instruments - Part 6: Specific characteristics of abrasive instruments
ISO 6360-7-2006 牙科学.旋转器械的数字编码体系.第7部分:心轴和特殊器械的具体特性 Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments
ISO 6872 AMD 1-1997 牙科陶瓷.修改件1 Dental ceramic; Amendment 1
ISO 6872-1995 牙科烤瓷 Dental ceramic
ISO 6873-1998 牙科石膏制品 Dental gypsum products
ISO 6874-2005 牙科学.聚合物基窗沟封闭剂 Dentistry - Polymer-based pit and fissure sealants
ISO 6875-1995 牙科病人用椅 Dental patient chair
ISO 6876-2001 牙科牙根管充填材料 Dental root canal sealing materials
ISO 6877-2006 牙科.牙根管牙胶尖 Dentistry - Root-canal obturating points
ISO 7405-1997 牙科学 用于牙科的医疗器械生物相容性临床前评价 牙科材料的试验方法 Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials
ISO 7488-1991 牙科银汞合金搅拌器 Dental amalgamators
ISO 7491-2000 牙科材料 色稳定性的测定 Dental materials - Determination of colour stability
ISO 7492-1997 牙科探针 Dental explorers
ISO 7493-2006 牙科.医生凳 Dentistry - Operator's stool
ISO 7494-1-2004 牙科学.牙科装置.第1部分:一般要求和试验方法 Dentistry - Dental units - Part 1: General requirements and test methods
ISO 7494-2-2003 牙科学.牙科综合治疗设备.第2部分:供水和供气 Dentistry - Dental units - Part 2: Water and air supply
ISO 7551-1996 牙科吸水捻 Dental absorbent points
ISO 7711-1-1997 牙科旋转器械 金钢钻器械 第1部分:尺寸、要求、标记和包装 Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging
ISO 7711-2-1992 牙科旋转器械 金刚钻器械 第2部分:切盘 Dental rotary instruments; diamond instruments; part 2: discs
ISO 7711-3-2004 牙科学.旋转器械用金刚钻器械.第3部分:磨粒尺寸、标注与彩色编码 Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code
ISO 7785-1-1997 牙科手机 第1部分:高速气动涡轮手机 Dental handpieces - Part 1: High-speed air turbine handpieces
ISO 7785-2-1995 牙科手机 第2部分:直角和弯角手机 Dental handpieces - Part 2: Straight and geared angle handpieces
ISO 7786-2001 牙科旋转器械 技工室用研磨器械 Dental rotary instruments - Laboratory abrasive instruments
ISO 7787-1-1984 牙科旋转器械 切割刀具 第1部分:技工室用钢质刀具 Dental rotary instruments; Cutters; Part 1 : Steel laboratory cutters
ISO 7787-2-2000 牙科旋转器械 切割刀具 第2部分:技工室用硬质合金刀具 Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters
ISO 7787-3-1991 牙科旋转器械 切割工具 第3部分:技工室研磨机用硬质合金刀具 Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines
ISO 7787-4-2002 牙科用旋转器械.切割刀具.第1部分:实验室用小型硬质合金刀具 Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters
ISO 7885-2000 一次性牙科直接注射针头 Sterile dental injection needles for single use
ISO 8282-1994 牙科设备 汞及合金混合器和调和器 Dental equipment - Mercury and alloy mixers and dispensers
ISO 8325-2004 牙科.旋转器械试验方法 Dentistry - Test methods for rotary instruments
ISO 9168-1991 牙科手机 软管连接件 Dental handpieces; hose connectors
ISO 9173-1-2006 牙科.拔牙钳.第1部分:一般要求和试验方法 Dentistry - Extraction forceps - Part 1: General requirements and test methods
ISO 9333-2006 牙科.上光材料 Dentistry - Brazing materials
ISO 9680-2007 牙科.工作灯 Dentistry - Operating lights
ISO 9687-1993 牙科设备 图形符号 Dental equipment; graphical symbols
ISO 9693 AMD 1-2005 牙科金属烤瓷修复系统.修改件1 Metal-ceramic dental restorative systems; Amendment 1
ISO 9693-1999 牙科金属烤瓷修复系统 Metal-ceramic dental restorative systems
ISO 9873 Technical Corrigendum 1-2000 牙科手持器械 可重复使用的镜子和手柄 技术勘误1 Dental hand instruments - Reusable mirrors and handles; Technical Corrigendum 1
ISO 9873-1998 牙科手持器械 可重复使用的镜子和手柄 Dental hand instruments - Reusable mirrors and handles
ISO 9917-1-2007 牙科学.水基粘结剂.第1部分:粉末/液体酸基粘结剂 Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements
ISO 9917-2-1998 牙科水基胶粘剂 第2部分:光固化胶粘剂 Dental water-based cements - Part 2: Light-activated cements
ISO 9997-1999 牙科卡式注射器 Dental cartridge syringes
ISO/TR 11175-1993 牙科植入物 研制牙科植入物指南 Dental implants; guidelines for developing dental implants
ISO/TR 14569-1-2007 牙科材料.磨损试验指南.第1部分:牙刷磨损 Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing
ISO/TR 15300-2001 牙科学 OSI临床编码规则在牙科产品分类和编码中的应用 Dentistry - Application of OSI clinical codification to the classification and coding of dental products
ISO/TR 15599 Technical Corrigendum 1-2003 牙科实验室规程的数字化编纂.技术勘误1 Digital codification of dental laboratory procedures; Technical Corrigendum 1
ISO/TR 15599-2002 牙科实验室规程的数字化编撰 Digital codification of dental laboratory procedures
ISO/TS 11405-2003 牙科材料.牙齿结构的附着力试验 Dental materials - Testing of adhesion to tooth structure
ISO/TS 14569-2-2001 牙科材料 耐磨损试验指南 第2部分:2和/或3体磨耗法 Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact
ISO/TS 17576-2004 牙科学.汞齐合金的腐蚀试验 Dentistry - Corrosion tests for amalgam
ISO/TS 22595-1-2006 牙科.厂区面积设备.第1部分:吸入系统 Dentistry - Plant area equipment - Part 1: Suction systems
ISO/TS 22911-2005 牙科学.牙科植入系统的临床前评定.动物试验法 Dentistry - Preclinical evaluation of dental implant systems - Animal test methods
编号中文名称英文名称

返回