| 编号 | 中文名称 | 英文名称 |
|---|
| ISO 12156-1-2006
| 柴油.使用高频往复装置(HFRR)进行润滑油评定.第1部分:试验方法
| Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method
|
| ISO 12156-2-2007
| 柴油.使用高频往复装置(HFRR)进行润滑评估.第2部分:限值
| Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 2: Limit
|
| ISO 12345-2002
| 柴油发动机.燃料喷射设备的清洁度评定
| Diesel engines - Cleanliness assessment of fuel injection equipment
|
| ISO 13296-2005
| 柴油发动机.高压燃料喷射管组件.一般要求和尺寸
| Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions
|
| ISO 13555-1-2003
| 柴油发动机.柴油喷注设备动态计时的检验规程.第1部分:预调节
| Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Part 1: Preconditioning
|
| ISO 13555-2-2003
| 柴油发动机.柴油喷注设备动态计时的检验规程.第2部分:试验方法
| Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Part 2: Test method
|
| ISO 13555-3-2004
| 柴油发动机.柴油喷射装置动态计时的检验规程.第3部分:时间测量设备的检测
| Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Part 3: Validation of timing measurement devices
|
| ISO 13759-1996
| 石油产品 柴油中硝酸烷基酯含量的测定 分光光度法
| Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method
|
| ISO 13948-1-2000
| 柴油机 燃料喷射泵和燃料喷射器低压连接 第1部分:螺纹连接件
| Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 1: Threaded connections
|
| ISO 13948-2-2000
| 柴油机 燃料喷射泵和燃料喷射器低压连接 第2部分:无螺纹(推进式)连接件
| Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections
|
| ISO 14681-1998
| 柴油机 燃料喷射泵试验 燃料喷射器的校正
| Diesel engines - Fuel injection pump testing - Calibration fuel injectors
|
| ISO 16147-2002
| 小艇.艇内柴油发动机.装在发动机上的燃油和电气元件
| Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components
|
| ISO 19013-1-2005
| 内燃机燃料回路用橡胶软管和管.规范.第1部分:柴油
| Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels
|
| ISO 19438-2003
| 内燃机用柴油燃料和汽油过滤器.用粒子计数及污物滞留量评定过滤效率
| Diesel fuel and petrol filters for internal combustion engines - Filtration efficiency using particle counting and contaminant retention capacity
|
| ISO 20844-2004
| 石油和相关产品.用柴油喷射器喷嘴测定含高聚物油的剪切稳定性
| Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
|
| ISO 21487-2006
| 小艇.永久性安装的汽油和柴油燃油罐
| Small craft - Permanently installed petrol and diesel fuel tanks
|
| ISO 22241-1-2006
| 柴油发动机.AUS 32型NOx还原剂.第1部分:质量要求
| Diesel engines - NOx reduction agent AUS 32 - Part 1: Quality requirements
|
| ISO 22241-2-2006
| 柴油机.NOx还原剂AUS 32.第2部分:试验方法
| Diesel engines - NOx reduction agent AUS 32 - Part 2: Test methods
|
| ISO 2697-1999
| 柴油机 喷油嘴偶件 “S”尺寸
| Diesel engines - Fuel nozzles - Size "S"
|
| ISO 2698-1993
| 柴油机 柴油机喷油器件 7型和28型
| Diesel engines; clamp-mounted fuel injectors, types 7 and 28
|
| ISO 2699-1994
| 柴油机 法兰安装式“S”号喷油嘴 2、3、4、5和6型
| Diesel engines; flange-mounted fuel injectors, size "S"; types 2, 3, 4, 5 and 6
|
| ISO 2974-2005
| 柴油机.60度锥孔的高压油管接头管端部连接
| Diesel engines - High-pressure fuel injection pipe end-connections with 60 degrees female cone
|
| ISO 4010-1998
| 柴油机 轴针式标准喷油嘴偶件
| Diesel engines - Calibrating nozzle, delay pintle type
|
| ISO 4020-2001
| 道路车辆 柴油机过滤器 试验方法
| Road vehicles - Fuel filters for diesel engines - Test methods
|
| ISO 4093-1999
| 柴油机 喷油泵 试验台用高压油管
| Diesel engines - Fuel injection pumps - High-pressure pipes for testing
|
| ISO 4113-1988
| 道路车辆 柴油机喷油泵的校泵油
| Road vehicles; calibration fluid for diesel injection equipment
|
| ISO 5165-1998
| 石油产品 柴油着火性能的测定 十六烷值法
| Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method
|
| ISO 6519-2004
| 柴油机.喷油泵.轴端和毂盘的锥度
| Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs
|
| ISO 7026-1997
| 柴油机 S尺寸轴针式喷油嘴偶件B型拧入式喷嘴器件(20、21、21.1和27型)
| Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B"
|
| ISO 7299-1-2007
| 柴油机.泵用端面安装法兰盘.第1部分:燃料油喷射泵
| Diesel engines - End-mounting flanges for pumps - Part 1: Fuel injection pumps
|
| ISO 7299-1996
| 柴油机 喷油泵端面法兰
| Diesel engines - End-mounting flanges for fuel injection pumps
|
| ISO 7310-1993
| 柴油机 有水平法兰盘的旋转式燃油滤清器顶盖 安装和连接尺寸
| Diesel engines; heads for spin-on fuel filters with horizontal flange; mounting and connecting dimensions
|
| ISO 7311-1993
| 柴油机 有垂直法兰盘的燃油滤清器顶盖 安装和连接尺寸
| Diesel engines; heads for fuel filters with vertical flange; mounting and connecting dimensions
|
| ISO 7654-1998
| 道路车辆 柴油发动机用旋装式燃油滤清器 装配和连接尺寸
| Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions
|
| ISO 7879-1997
| 柴油机 柱塞式喷油泵 安装尺寸
| Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions
|
| ISO 8356-1984
| 道路车辆 柴油机 22型螺旋拧入式喷油器
| Road vehicles; Diesel engines; Screw-in injector, type 22
|
| ISO 8535-1-2006
| 柴油发动机.高压喷射燃油管用钢管.第1部分:无缝冷拉制单壁钢管的要求
| Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
|
| ISO 8861-1998
| 造船 柴油机船舶机舱通风 设计要求和计算基准
| Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations
|
| ISO 8984-1-1993
| 柴油机 喷油器试验 第1部分:手压试验和调整装置
| Diesel engines; testing of fuel injectors; part 1: hand-lever-operated testing and setting apparatus
|
| ISO 8984-2-1993
| 柴油机 喷油器试验 第2部分:试验程序
| Diesel engines; testing of fuel injectors; part 2: test methods
|
| ISO 9102-1997
| 柴油机 压燃式发动机用24、25、26和26 1型螺旋拧入式喷油器
| Diesel engines - Screw-in injection nozzle holders, types 24, 25, 26 and 26.1
|
| ISO 9159-1988
| 道路车辆 含铅汽油和柴油用管嘴
| Road vehicles; nozzle spouts for leaded gasoline and diesel fuel
|
| ISO 9310-1987
| 道路车辆 压燃式(柴油)发动机的烟度测量 对快速路检的概括
| Road vehicles; Smoke measurement of compression-ignition (diesel) engines; Survey of short in-service tests
|
| ISO/TS 16332-2006
| 柴油机.柴油滤清器.燃料/水分离效果评定方法
| Diesel engines - Fuel filters - Method for evaluating fuel/water separation efficiency
|
| ISO/TS 23556-2007
| 去除润滑油中柴油机烟灰用装置的性能试验方法.初始过滤效率
| Performance test method for diesel engine soot-removal devices in lubricating oils - Initial filtration efficiency
|
| 编号 | 中文名称 | 英文名称 |
|---|