| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 2062-1-1959 | 齿轮滚刀规范.第1部分:一般用途滚刀1-20径节 | Specification for gear hobs. Hobs for general purposes, 1 d.p. to 20 d.p. inclusive |
| BS 2062-2-1960 | 齿轮滚刀规范.第2部分:涡轮减速机与类似传动装置的齿轮滚刀 | Specification for gear hobs. Hobs for gears for turbine reduction and similar drives |
| BS 2519-2-1976 | 齿轮术语.第2部分:标志方法 | Glossary for gears - Notation |
| BS 4185-11-1983 | 机床零件.第11部分:齿轮精度等级推荐规范 | Machine tool components - Recommendations for accuracy grades of gears |
| BS 436-5-1997 | 齿轮和螺旋齿轮.第5部分:齿轮齿根啮合面偏差容许值和定义 | Spur and helical gears - Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| BS 4582-1-1970 | 小齿距齿轮(米制模数)规范.第1部分:渐开线直齿轮和斜齿轮 | Specification for fine pitch gears (metric module) - Involute spur and helical gears |
| BS 4582-2-1978 | 小齿距齿轮(米制模数)规范.第2部分:滚铣与切削 | Specification for fine pitch gears (metric module) - Hobs and cutters |
| BS 5246-1976 | 正齿轮插齿刀规范.1至8米制模数 | Specification for pinion type cutters for spur gears - 1 to 8 metric module |
| BS 545-1982 | 伞齿轮(机械切割)规范 | Specification for bevel gears (machine cut) |
| BS 6168-1987 | 非金属正齿轮规范 | Specification for non-metallic spur gears |
| BS 6413-6-1991 | 润滑油、工业用油和有关产品(L类).C系列(齿轮)用分类 | Lubricants, industrial oils and related products (class L) - Classification for family C (gears) |
| BS 6765-4-1987 | 休闲式房车.大篷车.第4部分:下部齿轮规范 | Leisure accommodation vehicles - Caravans - Specification for undergear |
| BS 7016-2-1988 | 往复式内燃机部件和系统.第2部分:主动齿轮的术语词汇 | Components and systems of reciprocating internal combustion engines - Glossary of terms for main running gear |
| BS 7676-2-1993 | 齿轮验收法规.验收试验期间齿轮机构机械振动的测定 | Acceptance code for gears - Determination of mechanical vibrations of gear units during acceptance testing |
| BS 7848-1996 | 齿轮.齿轮齿的磨损和损伤.术语 | Gears - Wear and damage to gear teeth - Terminology |
| BS 7862-1996 | 齿轮.磨削后表面回火腐蚀检验 | Gears - Surface temper etch inspection after grinding |
| BS 978-1-1968 | 小节距齿轮规范.第1部分:渐开线直齿和斜齿齿轮 | Specification for fine pitch gears - Involute spur and helical gears |
| BS 978-2 Addendum No. 1-1959 | 仪器和时钟机构装置用齿轮.第2部分:摆线齿轮.双环弧型齿轮.补充件No. 1 | Gears for instruments and clockwork mechanisms - Cycloidal type gears - Double circular arc type gears |
| BS 978-2-1952 | 小节距齿轮.第2部分:摆线齿轮 | Specification for fine pitch gears - Cycloidal type gears |
| BS 978-3-1952 | 小节距齿轮.第3部分:伞齿轮 | Specification for fine pitch gears - Bevel gears |
| BS AU 211-1987 | 商用车辆和公共汽车齿轮传动空气压缩机四孔法兰尺寸规范 | Specification for dimensions of four-hole flanges for gear-driven air compressors for commercial vehicles and buses |
| BS AU 214-2-1988 | 变速箱法兰.第2部分:商用车辆和公共汽车A型齿轮箱法兰尺寸规范 | Gearbox flanges - Specification for dimensions for type A gearbox flanges for commercial vehicles and buses |
| BS AU 214-3-1988 | 变速箱法兰.第3部分:商用车辆和公共汽车S型齿轮箱法兰尺寸规范 | Gearbox flanges - Specification for dimensions for type S gearbox flanges for commercial vehicles and buses |
| BS AU 214a-1-1987 | 变速箱法兰.第1部分:T形、商用车辆和公共汽车用T型正交齿齿轮变速箱法兰的尺寸规范 | Gearbox flanges - Specification for dimensions of cross-tooth gearbox flanges, type T, for commercial vehicles and buses |
| BS AU 252-1993 | 道路车辆用经节起动器电动机小齿轮规范 | Specification for diametral pitch starter motor pinions for road vehicles |
| BS DD 222-1996 | 齿条和齿轮传动升降机规范 | Specification for rack and pinion lifts |
| BS EN 14203-2004 | 遮帘和百叶窗.带手摇曲柄的齿轮的使用性.要求和试验方法 | Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods |
| BS EN ISO 10442-2003 | 石油、化学和气体工业.整体封装齿轮传动离心空气压缩机 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors |
| BS EN ISO 13691-2002 | 石油和天然气工业.专用高速齿轮组件 | Petroleum and natural gas industries - High-speed special-purpose gear units |
| BS EN ISO 13929-2001 | 小艇.操舵装置.齿轮传动连接系统 | Small craft - Steering gear - Geared link systems |
| BS EN ISO 2203-1997 | 技术制图.齿轮的习惯画法 | Technical drawing - Conventional representation of gears |
| BS EN ISO 4263-4-2006 | 石油及其产品.抑制油和流体的老化性的测定.TOST试验.工业齿轮油的程序 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for industrial gear oils |
| BS EN ISO 4612-1999 | 塑料.试验用PVC糊料的制备.齿轮传动混合方法 | Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method |
| BS EN ISO 7785-2-1998 | 牙科器械.直的和齿轮传动弯角器械 | Dental handpieces - Straight and geared angle handpieces |
| BS ISO 10300-1-2001 | 伞齿轮负载能力的计算.说明及一般影响因素 | Calculation of load capacity of bevel gears - Introduction and general influence factors |
| BS ISO 10300-2-2001 | 伞齿轮负载能力的计算.表面耐久性的计算(凹坑法) | Calculation of load capacity of bevel gears - Calculation of surface durability (pitting) |
| BS ISO 10300-3-2001 | 伞齿轮负载能力的计算.齿根强度的计算 | Calculation of load capacity of bevel gears - Calculation of tooth root strength |
| BS ISO 1122-1-1998 | 齿轮术语词汇.几何学的相关定义 | Vocabulary of gear terms - Definitions related to geometry |
| BS ISO 1275-2006 | 传动和输送机用双节距的精密滚子链、连接件和相关的车链齿轮 | Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors |
| BS ISO 12925-1-1998 | 润滑剂、工业用油及相关产品(L类).C系列(齿轮).第1部分:密封式齿轮系统用润滑剂规范 | Lubricants, industrial oils and related products (class L) - Family C (Gears) - Specifications for lubricants for enclosed gear systems |
| BS ISO 14635-1-2000 | 齿轮.FZG试验规程.有关齿轮油的抗污性的FZG试验方法A/8、3/90 | Gears - FZG test procedures - FZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils |
| BS ISO 14635-3-2006 | 齿轮.FZG试验规程.有关半流质齿轮润滑油的刮磨承载能力和磨损特性的FZG试验方法A/2、8/50 | Gears - FZG test procedures - FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| BS ISO 17485-2006 | 伞形齿轮.ISO精密系统 | Bevel gears - ISO system of accuracy |
| BS ISO 18653-2003 | 齿轮.单个齿轮测量仪器的评价 | Gears - Evaluation of instruments for the measurement of individual gears |
| BS ISO 21771-2007 | 齿轮.圆柱渐开线齿轮和齿轮副.概念和几何学 | Gears - Cylindrical involute gears and gear pairs - Concepts and geometry |
| BS ISO 23509-2006 | 伞形和准双曲面齿轮几何学 | Bevel and hypoid gear geometry |
| BS ISO 2490-2007 | 模数0.5～40榫传动或轴键带动的实心(整体)齿轮滚刀.标称尺寸 | Solid (monobloc) gear hobs with tenon drive or axial keyway, 0, 5 to 40 module - Nominal dimensions |
| BS ISO 53-1998 | 通用和重型工程的圆柱齿轮.标准基本齿条轮廓 | Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile |
| BS ISO 54-1996 | 通用工程和重型工程的圆柱齿轮.模数 | Cylindrical gears for general engineering and for heavy engineering - Modules |
| BS ISO 6336-1-2006 | 正齿轮和斜齿轮负载能力的计算.基本原理、介绍和一般影响因素 | Calculation of load capacity of spur and helical gears - Basic principles, introduction and general influence factors |
| BS ISO 6336-2-2006 | 正齿轮和斜齿轮承载能力的计算.表面耐久性的计算(针点) | Calculation of load capacity of spur and helical gears - Calculation of surface durability (pitting) |
| BS ISO 6336-3-2006 | 正齿轮和斜齿轮承载能力的计算.齿牙弯曲强度计算 | Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength - Corrigendum 1 |
| BS ISO 6336-5-2003 | 直齿轮和斜齿轮承载能力的计算.材料的强度和质量 | Calculation of load capacity of spur and helical gears - Strength and quality of materials |
| BS ISO 6336-6-2006 | 计算正齿轮和斜齿轮承载能力.计算不同负荷设备寿命 | Calculation of load capacity of spur and helical gears - Calculation of service life under variable load |
| BS ISO 701-1998 | 齿轮的国际符号表示法.几何参数符号 | International gear notation - Symbols for geometrical data |
| BS ISO 8579-1-2002 | 齿轮装置验收规程.空气中噪声试验规程 | Acceptance code for gear units - Test code for airborne sound |
| BS ISO 9083-2001 | 正齿轮和斜齿轮的负载能力的计算.船用齿轮的应用 | Calculation of load capacity of spur and helical gears - Application to marine gears |
| BS ISO 9084-2003 | 正齿轮和斜齿轮承载能力计算.快速齿轮和类似要求齿轮的应用 | Calculation of load capacity of spur and helical gears - Application to high speed gears and gears of similar requirements |
| BS ISO 9085-2002 | 正齿轮和斜齿轮荷载能力的计算.应用于工业齿轮 | Calculation of load capacity of spur and helical gears - Application for industrial gears |
| BS ISO TR 10064-1-1997 | 检验实施规程.齿轮齿对应面的检验 | Code of inspection practice - Inspection of corresponding flanks of gear teeth |
| BS ISO TR 10064-2-1997 | 圆柱齿轮.检验实施标准.与径向组合偏差,径向跳动,齿厚和齿隙相关的检验 | Code of inspection practice - Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| BS ISO TR 10064-3-1997 | 检验实施规程.与齿轮坯料、轴心距和轴的平行度相关的推荐 | Code of inspection practice - Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| BS ISO TR 10495-1998 | 圆柱齿轮.在变化承载条件下使用寿命的计算.符合ISO 6336 规定的圆柱齿轮的条件 | Cylindrical gears - Calculation of service life under variable load - Conditions for cylindrical gears in accordance with ISO 6336 |
| BS ISO/TR 10064-4-1999 | 圆柱齿轮.检验实施规程.与表面纹理和齿轮齿接触模型检验相关的推荐方法 | Code of inspection practice - Recommendations relative to surface texture and tooth contact pattern checking |
| BS ISO/TR 13989-1-2001 | 圆柱形齿轮、伞齿轮和准双曲面齿轮磨损承载能力的计算.闪蒸温度法 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Flash temperature method |
| BS ISO/TR 13989-2-2001 | 圆柱形齿轮、伞齿轮和准双曲面齿轮的磨损承载能力的计算方法.累积温度法 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Integral temperature method |
| BS ISO/TR 14179-1-2001 | 齿轮.热容量.在温度为95℃时测定齿轮传动热平衡 | Gears - Thermal capacity - Rating gear drives with thermal equilibrium at 95 °C sump temperature |
| BS ISO/TR 14179-2-2001 | 齿轮.热容量.热承载能力 | Gears - Thermal capacity - Thermal load carrying capacity |
| DD 222-1996 | 小齿轮导轨升降机规范 | Specification for rack and pinion lifts |
| 编号 | 中文名称 | 英文名称 |