编号 |
中文名称 |
英文名称 |
ISO 10300-1-2001
|
斜齿轮承载能力的计算 第1部分:引言和一般影响因素
|
Calculation of load capacity of bevel gears - Part 1: Introduction and general influence factors
|
ISO 10300-2-2001
|
斜齿轮承载能力的计算 第2部分:齿轮表面强度(点蚀)的计算
|
Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting)
|
ISO 10300-3-2001
|
锥形齿轮承载能力的计算 第3部分:齿根强度的计算
|
Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
|
ISO 10442-2002
|
石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机
|
Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors
|
ISO 10825-1995
|
齿轮 轮齿的磨损和损伤 术语 两种语言版
|
Gears - Wear and damage to gear teeth - Terminology
|
ISO 1122-1 Technical Corrigendum 1-1999
|
齿轮名词术语 第1部分:几何定义 技术勘误1 两种语言版
|
Vocabulary of gear terms - Part 1: Definitions related to geometry; Technical Corrigendum 1
|
ISO 1122-1 Technical Corrigendum 2-2009
|
齿轮名词术语.第1部分:与几何学相关的定义.技术勘误2
|
Vocabulary of gear terms - Part 1: Definitions related to geometry; Technical Corrigendum 2
|
ISO 1122-1-1998
|
齿轮名词术语 第1部分:几何定义 两种语言版
|
Vocabulary of gear terms - Part 1: Definitions related to geometry
|
ISO 1122-2-1999
|
齿轮名词术语 第2部分:蜗轮的几何定义 两种语言版
|
Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry
|
ISO 12925-1 Technical Corrigendum 1-2002
|
润滑剂、工业用油和相关产品(L类).(齿轮)C种.第1部分:密封齿轮系统用润滑剂.技术勘误1
|
Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems; Technical Corrigendum 1
|
ISO 12925-1-1996
|
润滑剂、工业润滑油和有关产品(L类) C组(齿轮) 第1部分:密式齿轮系统用润滑剂规格
|
Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems
|
ISO 1328-1-1995
|
圆柱齿轮.ISO 体系的准确度.第1部分:齿轮啮合的对应齿根面的相应偏差的容许值和定义
|
Cylindrical gears - ISO system of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
|
ISO 1328-2-1997
|
圆柱齿轮 ISO准确度制 第2部分:径向偏差和不圆度误差的定义及允许偏差值
|
Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
|
ISO 1340-1976
|
圆柱齿轮 图样上应注明的买方要求的尺寸数据
|
Cylindrical gears; Information to be given to the manufacturer by the purchaser in order to obtain the gear required
|
ISO 1341-1976
|
锥齿轮 图样上应注明的买方要求的尺寸数据
|
Straight bevel gears; Information to be given to the manufacturer by the purchaser in order to obtain the gear required
|
ISO 13929-2001
|
小艇 操舵装置 齿轮传动连接系统
|
Small craft - Steering gear - General link systems
|
ISO 14104-1995
|
齿轮.磨削后表面回火腐蚀剂的检验
|
Gears - Surface temper etch inspection after grinding
|
ISO 14635-1-2000
|
齿轮 FZG试验程序 第1部分:测试齿轮油压塑性变形承载能力用的A/8、3/90 FZG试验方法
|
Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
|
ISO 14635-2-2004
|
齿轮.FZG试验程序.第2部分:测试高极压齿轮油压塑性变形承载能力用的A10/16、6R/120 FZG分步负载试验
|
Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
|
ISO 14635-3-2005
|
齿轮.FZG试验程序.第3部分:半流齿轮润滑脂压塑性变形承载能力和耐磨性用A/2、8/50 FZG试验方法
|
Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
|
ISO 17485-2006
|
伞形齿轮.ISO精密系统
|
Bevel gears - ISO system of accuracy
|
ISO 18653-2003
|
齿轮.单个齿轮测量用仪器的评价
|
Gears - Evaluation of instruments for the measurement of individual gears
|
ISO 21771-2007
|
齿轮.圆柱渐开线齿轮和齿轮副.概念和几何学
|
Gears - Cylindrical involute gears and gear pairs - Concepts and geometry
|
ISO 2203-1973
|
技术制图 齿轮的习惯画法
|
Technical drawings; Conventional representation of gears
|
ISO 23509-2006
|
伞形和准双曲面齿轮几何学
|
Bevel and hypoid gear geometry
|
ISO 3820-1978
|
电影 用于超8mm电影胶片的输片齿轮 尺寸和设计
|
Cinematography; Sprockets for 8 mm Type S motion-picture film; Dimensions and design
|
ISO 4263-4-2006
|
石油及相关产品.防腐蚀矿物油和液体的老化性能测定.TOST试验.第4部分:工业齿轮油的程序
|
Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils
|
ISO 4468 Technical Corrigendum 1-2009
|
齿轮滚刀.精确度要求;技术勘误表1
|
Gear hobs - Accuracy requirements; Technical Corrigendum 1
|
ISO 4468-2009
|
齿轮滚刀.精度要求
|
Gear hobs - Accuracy requirements
|
ISO 4612-1999
|
塑料 试验用聚氯乙烯糊料的制备 齿轮传动混合方法
|
Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method
|
ISO 53-1998
|
通用和重型机械用圆柱齿轮 基本齿廓
|
Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile
|
ISO 54-1996
|
通用机械和重型机械用圆柱齿轮 模数
|
Cylindrical gears for general engineering and for heavy engineering - Modules
|
ISO 6336-1 Technical Corrigendum 1-2008
|
正齿轮和斜齿轮的负载能力计算.第1部分:基本原理、简介和一般影响因素.技术勘误1
|
Calculation of load capacity of spur and helical gears - Part 1: Basic principles, introduction and general influence factors; Technical Corrigendum 1
|
ISO 6336-1-2006
|
直齿轮和斜齿轮承载能力的计算.第1部分:基本原则、引言和一般影响因素
|
Calculation of load capacity of spur and helical gears - Part 1: Basic principles, introduction and general influence factors
|
ISO 6336-2 Technical Corrigendum 1-2008
|
正齿轮和斜齿轮的负载能力计算.第2部分:表面耐久性(蚀点)计算.技术勘误1
|
Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting); Technical Corrigendum 1
|
ISO 6336-2-2006
|
直齿轮和斜齿轮承载能力的计算.第2部分:齿轮表面强度(蚀点)的计算
|
Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting)
|
ISO 6336-3 Technical Corrigendum 1-2008
|
正齿轮和斜齿轮承载能力的计算.第3部分:轮齿弯曲强度的计算.技术勘误1
|
Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength; Technical Corrigendum 1
|
ISO 6336-3-2006
|
直齿轮和斜齿轮承载能力的计算.第3部分:轮齿弯曲强度的计算
|
Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
|
ISO 6336-5-2003
|
直齿轮和斜齿轮承载能力的计算.第5部分:材料的强度和质量
|
Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials
|
ISO 6336-6 Technical Corrigendum 1-2007
|
正齿轮和斜齿轮荷载能力的计算.第6部分:可变荷载下使用寿命的计算.技术勘误1
|
Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load; Technical Corrigendum 1
|
ISO 6336-6-2006
|
直齿轮和斜齿轮承载能力的计算.第6部分:变化负荷下工作寿命计算
|
Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load
|
ISO 6743-6-1990
|
润滑剂、工业润滑油和有关产品(L类) 分类 第6部分:C组(齿轮)
|
Lubricants, industrial oils and related products (class L); classification; part 6: family C (gears)
|
ISO 677-1976
|
通用机械和重型机械直齿锥齿轮 基本齿廓
|
Straight bevel gears for general engineering and heavy engineering; Basic rack
|
ISO 678-1976
|
通用机械和重型机械直齿锥齿轮 模数和径节
|
Straight bevel gears for general engineering and heavy engineering; Modules and diametral pitches
|
ISO 6896-1984
|
电影 35mm电影放映机用间歇齿轮 尺寸
|
Cinematography; Intermittent sprockets for 35 mm motion-picture projectors; Dimensions
|
ISO 701-1998
|
齿轮的国际符号表示法 几何参数符号
|
International gear notation - Symbols for geometrical data
|
ISO 7646-1986
|
商用车辆和公共汽车 齿轮箱法兰 A型
|
Commercial vehicles and buses; Gearbox flanges; Type A
|
ISO 7647-1986
|
商用车辆和公共汽车 齿轮箱法兰 S型
|
Commercial vehicles and buses; Gearbox flanges; Type S
|
ISO 8123-1991
|
道路车辆 起动电机径节小齿轮
|
Road vehicles; diametral pitch starter motor pinions
|
ISO 81400-4 Technical Corrigendum 1-2005
|
风力涡轮机.第4部分:齿轮箱的设计和规范.技术勘误1
|
Wind turbines - Part 4: Design and specification of gearboxes; Technical Corrigendum 1
|
ISO 81400-4-2005
|
风力涡轮机.第4部分:齿轮箱的设计和规范
|
Wind turbines - Part 4: Design and specification of gearboxes
|
ISO 8579-1-2002
|
齿轮装置验收规程.第1部分:空气载声的试验规程
|
Acceptance code for gear units - Part 1: Test code for airborne sound
|
ISO 8579-2-1993
|
齿轮验收规则 第2部分:验收试验中齿轮装置机械振动测定
|
Acceptance code for gears; part 2: determination of mechanical vibrations of gear units during acceptance testing
|
ISO 8667-1992
|
商用车辆和公共汽车 十字齿形齿轮箱法兰 T型
|
Commercial vehicles and buses; cross-tooth gearbox flanges; type T
|
ISO 9083-2001
|
直齿轮和斜齿轮承载能力的计算 船用齿轮的计算
|
Calculation of load capacity of spur and helical gears - Application to marine gears
|
ISO 9085-2002
|
正齿轮和斜齿轮的荷载能力计算.工业齿轮应用
|
Calculation of load capacity of spur and helical gears - Application for industrial gears
|
ISO 9457-1-1991
|
道路车辆 米制起动电机小齿轮 第1部分:通常使用的小齿轮
|
Road vehicles; metric starter motor pinions; part 1: currently used pinions
|
ISO 9457-2-1994
|
道路车辆.米制起动电机小齿轮.第2部分:具有20度压力角的小齿轮
|
Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle
|
ISO/TR 10064-1-1992
|
圆柱齿轮 实用检验规则 第1部分:齿轮齿面的检验
|
Cylindrical gears; code of inspection practice; part 1: inspection of corresponding flanks of gear teeth
|
ISO/TR 10064-2 Technical Corrigendum 1-2001
|
圆柱齿轮.检验实施规程.第2部分:与径向复合偏差磨损及齿厚齿隙有关的检验.技术勘误1
|
Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash; Technical Corrigendum 1
|
ISO/TR 10064-2-1996
|
圆柱齿轮 实用检验规则 第2部分:径向偏差、椭圆度、齿厚和齿间隙的检验
|
Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
|
ISO/TR 10064-3-1996
|
圆柱齿轮 实用检验规则 第3部分:轴心圆柱的齿轮坯料、轴心距和平行度的建议
|
Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
|
ISO/TR 10064-4-1998
|
圆柱齿轮 实用检验规则 第4部分:表面结构和齿轮接触斑点检验的建议
|
Cylindrical gears - Code of inspection practice - Part 4: Recommendations relative to surface texture and tooth contact pattern checking
|
ISO/TR 10064-5-2005
|
圆柱齿轮.实用检验规则.第5部分:与齿轮测量仪器的评价相关的建议
|
Cylindrical gears - Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments
|
ISO/TR 10064-6-2009
|
检验实施规程.第6部分:斜齿轮测量方法
|
Code of inspection practice - Part 6: Bevel gear measurement methods
|
ISO/TR 13593 Technical Corrigendum 1-2005
|
工业设施用封闭式齿轮驱动装置.技术勘误1
|
Enclosed gear drives for industrial applications; Technical Corrigendum 1
|
ISO/TR 13593-1999
|
工业齿轮用封闭式齿轮装置
|
Enclosed gear drives for industrial applications
|
ISO/TR 13989-1-2000
|
圆柱齿轮、锥齿轮和双曲线齿轮啮合承载能力的计算 第1部分:瞬现温度法
|
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 1: Flash temperature method
|
ISO/TR 13989-2-2000
|
圆柱齿轮、锥齿轮和双曲线齿轮啮合承载能力的计算 第2部分:积分温度法
|
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 2: Integral temperature method
|
ISO/TR 14179-1-2001
|
齿轮 热性能 第1部分:在95℃储存温度下热平衡的额定齿轮传动
|
Gears - Thermal capacity - Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature
|
ISO/TR 14179-2-2001
|
齿轮 热性能 第2部分:热承载能力
|
Gears - Thermal capacity - Part 2: Thermal load-carrying capacity
|
ISO/TR 18792-2008
|
工业齿轮传动装置的润滑油
|
Lubrication of industrial gear drives
|
编号 |
中文名称 |
英文名称 |