| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 108-9-1988 | 幻灯放映机和幻灯片.直式片盒 5 x 5 - 36 和 5 x 5 - 50.第9部分:片盒外形和齿轮系统量规 | Slide projectors and slides; straight cartridge 5 × 5-36 and 5 × 5-50; gauge for cartridge profile and gear system |
| DIN 15053-1976 | 起重机.减速齿轮、连接尺寸、外形规格、输出力矩 | Cranes; reduction gears, connecting dimensions, contour gauges, output torques |
| DIN 15074-1978 | 起重机..无齿轮带滑动轴承的起重机凸缘导轨轮 | Cranes; flanged crane rail wheels with plain bearings, without gear wheel |
| DIN 15075-1977 | 起重机.带齿轮的装有关节轴承的有法兰的起重机轨道轮 | Cranes; flanged crane rail wheels, with plain bearings, with gear wheel |
| DIN 15076-1977 | 起重机.不带齿轮的装有关节轴承的带轮胎的有法兰的起重机轨道轮 | Cranes; flanged crane rail wheels with tyre, with plain bearings, without gear wheel |
| DIN 15077-1977 | 起重机.带滑动轴承和齿轮的带轮箍的起重机凸缘导轨轮. | Cranes; flanged crane rail wheels with tyre, with plain bearings, with gear wheel |
| DIN 15078-1977 | 起重机.不带齿轮的装有滚子轴承的有法兰的起重机轨道轮 | Cranes; flanged crane rail wheels, with roller bearings, without gear wheel |
| DIN 15079-1977 | 起重机.带滚柱轴承和齿轮的起重机带凸缘导轨轮 | Cranes; flanged crane rail wheels, with roller bearings, with gear wheel |
| DIN 15080-1977 | 起重机.带滚柱轴承、无齿轮、带轮箍的起重机凸缘导轨轮 | Cranes; flanged crane rail wheels with tyre, with roller bearings, without gear wheel |
| DIN 15081-1977 | 起重机.带滚柱轴承、齿轮、带轮箍的起重机带凸缘导轨轮 | Cranes; flanged crane rail wheels with tyre, with roller bearings, with gear wheel |
| DIN 15082-1-1977 | 起重机.轨道轮.螺旋连接的齿轮 | Cranes; crane rail wheels, screwed-on gear wheels |
| DIN 15082-2-1977 | 起重机.与大齿轮压配合的带滚柱轴承的起重机轨道轮 | Cranes; crane rail wheels with roller bearings, pressed-on gear wheels |
| DIN 15530-1-1981 | 35mm 胶片.输片齿轮.主要尺寸、基准齿形 | Film 35 mm; sprockets, main dimensions, reference profile |
| DIN 15530-2-1980 | 35mm 胶片.输片齿轮.具有标准化宽度的所有胶片用齿根直径的规定 | Film 35 mm; sprockets, specifications for the root diameter for all films with standardized film width |
| DIN 15625-1984 | 16mm胶片.输片齿轮.主要尺寸、弧形标准形状 | Film 16 mm; sprockets; main dimensions, arc reference profile |
| DIN 15730-1984 | 65mm和70mm胶片.输片齿轮.主要尺寸、弧形标准形状 | Film 65 mm and film 70 mm; sprockets; main dimensions, arc reference profile |
| DIN 1825-1977 | 圆柱齿轮用插齿刀.直齿轮用盘形齿轮铣刀 | Pinion-type cutters for cylindrical gears; disc-gear cutters for spur gears |
| DIN 1826-1977 | 圆柱齿轮用插齿刀.直齿轮用加大毂形齿轮刀具 | Pinion-type cutters for cylindrical gears; extended hub gear cutters for spur gears |
| DIN 1828-1977 | 圆柱齿轮用插齿刀.直齿轮用带柄齿轮刀具 | Pinion-type cutters for cylindrical gears; shank-gear cutters for spur gears |
| DIN 1829-1-1977 | 圆柱齿轮用插齿刀.设计、尺寸定义、标志 | Pinion-type cutters for cylindrical gears; design, dimensions, definitions, marking |
| DIN 1829-2-1977 | 圆柱齿轮用插齿刀.公差 | Pinion-type cutters for cylindrical gears; tolerances |
| DIN 21186-1994 | 凿井,矿井中起吊负载的钢索悬挂齿轮,安全性要求和试验 | Shaft sinking; rope suspension gears for load hoisting in shafts; safety requirements and testing |
| DIN 21187-1994 | 凿井,矿井中起吊负载的钢链悬挂齿轮,安全性要求和试验 | Shaft sinking; chain suspension gears for load hoisting in shafts; safety requirements and testing |
| DIN 28162-1-1983 | 带旋转机构密封的搅拌器传动装置用搅拌器齿轮托架 | Agitator gear stools for agitator drives with a rotating mechanical seal |
| DIN 28162-2-1983 | 带填料盖密封的搅拌器传动装置用搅拌器齿轮托架 | Agitator gear stools for agitator drives with gland sealing |
| DIN 3960 Bb.1-1980 | 渐开线圆柱齿轮和齿轮副定义.公式分类 | Definitions on involute cylindrical gears and gear pairs; classification of the equations |
| DIN 3960-1987 | 渐开线圆柱齿轮和齿轮副的定义和参数 | Definitions, parameters and equations for involute cylindrical gears and gear pairs |
| DIN 3961-1978 | 圆柱齿轮的齿公差；基础 | Tolerances for Cylindrical Gear Teeth; Bases |
| DIN 3962-1-1978 | 圆柱齿轮啮合公差.专用参数偏移公差 | Tolerances for Cylindrical Gear Teeth; Tolerances for Diviations of Individual Parameters |
| DIN 3962-2-1978 | 圆柱齿轮啮合公差.齿面线偏移公差 | Tolerances for Cylindrical Gear Teeth; Tolerances for Tooth Trace Deviations |
| DIN 3962-3-1978 | 圆柱齿轮啮合公差；齿距偏移公差 | Tolerances for Cylindrical Gear Teeth; Tolerances for Pitch-span Deviations |
| DIN 3963-1978 | 圆柱齿轮啮合公差；操作偏移公差 | Tolerances for Cylindrical Gear Teeth; Tolerances for Working Deviations |
| DIN 3964-1980 | 圆柱齿轮箱的轴距偏差和轴位公差 | Deviations of Shaft Centre Distances and Shaft Position Tolerances of Casings for Cylindrical Gears |
| DIN 3965-1-1986 | 伞齿轮啮合公差.第1部分:基本概念 | Tolerancing of bevel gears; basic concepts |
| DIN 3965-2-1986 | 伞齿轮啮合公差.第2部分:专用参数公差 | Tolerancing of bevel gears; tolerances for individual parameters |
| DIN 3965-3-1986 | 伞齿轮啮合公差..第2部分:正切组合误差用公差 | Tolerancing of bevel gears; tolerances for tangential composite errors |
| DIN 3965-4-1986 | 伞齿轮啮合公差.第4部分:轴线夹角误差及轴线交叉点偏差用公差 | Tolerancing of bevel gears; tolerances for shaft angle errors and axes intersection point deviations |
| DIN 3966-1-1978 | 图纸上齿轮啮合信息 第1部分:圆柱齿轮渐开线啮合信息 | Information on Gear Teeth in Drawings; Information on Involute Teeth for Cylindrical Gears |
| DIN 3966-2-1978 | 图纸上齿轮啮合信息 第2部分:直齿伞齿轮啮合信息 | Information on Gear Teeth in Drawings; Information on Straight Bevel Gear Teeth |
| DIN 3967-1978 | 齿轮配合体系.侧隙、齿厚容差和齿厚公差.原则 | System of Gear Fits; Backlash, Tooth Thickness Allowances, Tooth Thickness Tolerances; Principles |
| DIN 3968-1960 | 渐开线正齿轮用单头滚铣刀的公差 | Tolerances for Single-start Hobs for Involute Spur Gears |
| DIN 3970-2010 | 圆柱齿轮检查用标准齿轮.齿轮毛坯和齿轮传动 | Master gears for checking cylindrical gears - Gear blanks and gearing |
| DIN 3971-1980 | 伞齿轮和伞齿轮副的定义和参数 | Definitions and Parameters for Bevel Gears and Bevel Gear Pairs |
| DIN 3972-1952 | 与DIN 867相符的渐开线齿轮装置的齿轮切削刀具的基准齿廓 | Reference Profiles of Gear-cutting Tools for Involute Tooth Systems according to DIN 867 |
| DIN 3977-1981 | 圆柱齿轮齿厚测试用的半径或直径测量元件的直径 | Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears |
| DIN 3979-1979 | 齿轮系轮齿损伤.名称、特性、原因 | Tooth Damage on Gear Trains; Designation, Characteristics, Causes |
| DIN 3990-1-1987 | 圆柱齿轮承载能力的计算.引言和一般影响因素 | Calculation of load capacity of cylindrical gears; introduction and general influence factors |
| DIN 3990-11-1989 | 圆柱齿轮承载能力的计算.工业传动应用标准.详细方法 | Calculation of load capacity of cylindrical gears; application standard for industrial gears; detailed method |
| DIN 3990-2-1987 | 圆柱齿轮承载能力的计算.耐点蚀性能的计算 | Calculation of load capacity cylindrical gears; calculation of pitting resistance |
| DIN 3990-21-1989 | 圆柱齿轮承载能力计算.快速齿轮和类似要求齿轮的应用标准 | Calculation of load capacity of cylindrical gears; application standard for high speed gears and gears of similar requirement |
| DIN 3990-3-1987 | 圆柱齿轮承载能力的计算.齿强度计算 | Calculation of load capacity of cylindrical gears; calculation of tooth strength |
| DIN 3990-31-1990 | 圆柱齿轮承载能力计算.船用减速齿轮箱应用标准 | Calculation of load capacity of cylindrical gears; application standard for marine gears |
| DIN 3990-4-1987 | 圆柱齿轮承载能力的计算.咬接承载能力的计算 | Calculation of load capacity of cylindrical gears; calculation of scuffing load capacity |
| DIN 3990-41-1990 | 圆柱齿轮的承载能力计算.车辆变速箱的使用标准 | Calculation of load capacity of cylindrical gears; application standard for vehicle gears |
| DIN 3990-5-1987 | 圆柱齿轮承载能力计算.疲劳极限和材料质量 | Calculation of load capacity of cylindrical gears; endurance limits and material qualities |
| DIN 3990-6-1994 | 圆柱齿轮负载能力计算.第6部分:工作强度计算 | Calculation of load capacity of cylindrical gears - Part 6: Calculation of service strength |
| DIN 3991-1-1988 | 非偏轴伞齿轮承载能力计算.引言和一般影响因数 | Calculation of load capacity of bevel gears without pinion offset; introduction and general influence factors |
| DIN 3991-2-1988 | 非偏轴伞齿轮承载能力计算.抗蚀能力计算 | Calculation of load capacity of bevel gears without pinion offset; calculation of pitting resistance |
| DIN 3991-3-1988 | 非偏轴伞齿轮承载能力计算.齿根载荷能力计算 | Calculation of load capacity of bevel gears without pinion offset; calculation of tooth strength |
| DIN 3991-4-1988 | 非偏轴伞齿轮承载能力计算.第4部分:磨损载荷计算 | Calculation of load capacity of bevel gears without pinion offset; calculation of scuffing load capacity |
| DIN 3992-1964 | 外啮合圆柱齿轮和斜齿轮的齿顶高修正 | Addendum modification of external spur and helical gears |
| DIN 3993-1-1981 | 渐开线啮合圆柱内齿轮副的几何设计.基本规则 | Geometrical design of cylindrical internal involute gear pairs; Basic rules |
| DIN 3993-2-1981 | 渐开线啮合圆柱内齿轮副的几何设计:内小齿轮配合的几何极限图 | Geometrical design of cylindrical internal involute gear pairs; Diagrams for geometrical limits of internal gear-pinion matings |
| DIN 3993-3-1981 | 渐开线啮合圆柱内齿轮副的几何设计:齿顶高变位系数测定图 | Geometrical design of cylindrical internal involute gear pairs; Diagrams for the determination of addendum modification coefficients |
| DIN 3993-4-1981 | 渐开线啮合圆柱内齿轮副的几何设计.内小齿轮刀具配合的几何极限图 | Geometrical design of cylindrical internal involute gear pairs; Diagrams for limits of internal gear - pinion type cutter matings |
| DIN 3998 Bb.1-1976 | 齿轮和齿轮副的名称.相同术语字母索引 | Denominations on Gears and Gear Pairs; Alphabetical Index of Equivalent Terms |
| DIN 3998-1-1976 | 齿轮和齿轮副的名称.一般定义 | Denominations on Gears and Gear Pairs; General Definitions |
| DIN 3998-2-1976 | 齿轮和齿轮副的名称.圆柱齿轮和齿轮副 | Denominations on Gears and Gear Pairs; Cylindrical Gears and Gear Pairs |
| DIN 3998-3-1976 | 齿轮和齿轮副的名称.准双曲面伞齿轮和齿轮副 | Denominations on Gears and Gear Pairs; Bevel and Hypoid Gears and Gear Pairs |
| DIN 3998-4-1976 | 齿轮和齿轮副的名称.蜗轮副 | Denominations on Gears and Gear Pairs; Worm Gear Pairs |
| DIN 3999-1974 | 齿轮标注方法.符号 | Gear notation; symbols |
| DIN 4000-141-2005 | 特性表.第141部分:圆柱形齿轮用带孔或柄的滚刀 | Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears |
| DIN 4000-27-1982 | 齿轮机构产品特性图表 | Tabular layouts of article characteristics for gear units |
| DIN 4000-59-1987 | 齿条、圆柱齿轮、小齿轮轴、伞齿轮、圆锥齿轮轴、蜗杆和蜗轮的产品特性图表 | Tabular layouts of article characteristics for racks, cylindrical gears, pinion shafts, bevelgears, bevel pinion shafts, worms and worm wheels |
| DIN 45635-23-2003 | 机器噪声测量.空气噪声发射包络面法.第23部分:齿轮传动 | Measurement of noise emitted by machines - Airborne noise emission enveloping surface method - Part 23: Gear transmisson |
| DIN 45635-55-1986 | 机器排放的空气传播噪声的测量.第55部分:包洛面法.磨擦轮和/或齿轮传动调轨车 | Measurement of airborne noise emitted by machines; enveloping surface method; shunting trolleys with friction-wheel and/or gearwheel drive |
| DIN 51509-1-1976 | 齿轮润滑剂的选择.齿轮润滑油 | Selection of lubricants for gears; gear lubricating oils |
| DIN 51509-2-1988 | 润滑剂.齿轮传动用润滑剂的选择.第2部分:半流体润滑剂 | Lubricants; selection for lubricants for gears; semi-fluid lubricants |
| DIN 58400-1984 | 精密机械用渐开线圆柱齿轮基本齿形 | Basic rack for involute teeth of cylindrical gears for fine mechanics |
| DIN 58405 Bb.1-1972 | 精密加工用正齿轮传动装置.计算表 | Spur gear drives for fine mechanics; calculating sheet |
| DIN 58405-1-1972 | 精密机械用正齿轮传动装置.第1部分:适用范围、定义、主要设计数据、分类 | Spur Gear Drives for Fine Mechanics; Scope, Definitions, Principal Design Data, Classification |
| DIN 58405-2-1972 | 精密机械用正齿轮传动装置.第2部分:传动装置配合选择、公差、容差 | Spur Gear Drives for Fine Mechanics; Gear Fit Selection, Tolerances, Allowances |
| DIN 58405-3-1972 | 精密加工用正齿轮传动装置.图样上的标注.计算示例 | Spur Gear Drives for Fine Mechanics; Indication in Drawings, Examples for Calculation |
| DIN 58405-4-1972 | 精密机械用正齿轮传动装置.第4部分:表格 | Spur Gear Drives for Fine Mechanics; Tables |
| DIN 58411-1987 | 模数0.1至1mm 的圆柱形精密正齿轮加工用滚铣刀. | Hobs for cylindrical fine pitch gears with modul 0,1 up to 1 mm |
| DIN 58412-1987 | 精密机构用的齿轮工具的基本齿条齿形.符合德国标准（ＤＩＮ)５８４００和(ＤＩＮ）８６７的渐开线齿轮 | Basic rack tooth profile for gear tools for fine mechanics; involute gears according DIN 58400 and DIN 867 |
| DIN 58413-1987 | 精密加工装置的齿轮滚刀的公差 | Tolerances for gear hobs for fine mechanics |
| DIN 58420-1981 | 检验精密机械的正齿轮用的标准齿轮.齿轮毛坯及啮合 | Master gears for checking of spur gears for fine mechanics; gear blanks and gearing |
| DIN 58425-1-1980 | 精密机械的圆齿面齿轮.第1部分:综述、符号、术语 | Gears with round flanks for fine mechanics; survey, symbols, terms |
| DIN 58425-2-1980 | 精密机械的圆齿面齿轮.第2部分:齿形 | Gears with round flanks for fine mechanics; gear profile |
| DIN 58425-3-1980 | 精密机械的圆齿面齿轮.第3部分:机轮和传动装置的计算与设计 | Gears with round flanks for fine mechanics; calculation and design of wheel and pignon |
| DIN 58425-4-1980 | 精密机械的圆齿面齿轮.第4部分:传动轮和小齿轮的公差和允许偏差 | Gears with round flanks for fine mechanics; tolerances and permissible devations for wheel and pignon |
| DIN 58425-5-1980 | 精密机械的圆齿面齿轮.第5部分:齿轮刀具的齿廓 | Gears with round flanks for fine mechanics; gear tool profile |
| DIN 58425-6-1980 | 精密机械的圆齿面齿轮.第6部分:图样指示 | Gears with round flanks for fine mechanics; indication on drawings |
| DIN 58425-7-1980 | 精密机械的圆齿面齿轮.第7部分:图表 | Gears with round flanks for fine mechanics; tables, diagrams |
| DIN 68856-8-2004 | 家具用五金件.术语和定义.第8部分:推拉门齿轮 | Hardware for furniture - Terms and definitions - Part 8: Sliding door gears |
| DIN 69001-31-1981 | 机床.多轴头.A型传动小齿轮 | Machine tools; Multi-spindle heads; Driving pinions Type A |
| DIN 69001-43-1981 | 机床.多轴头.A和B型小齿轮套 | Machine tools; Multi-spindle heads; Pinion sleeves Types A and B |
| DIN 69001-52-1981 | 机床.多轴头.A型齿轮 | Machine tools; Multi-spindle heads; Gears Type A |
| DIN 72782-1-1967 | 风挡雨刮子.第1部分:雨刮子电动机.正齿轮传动的电动机 | Windshield wipers; wiper motors, rotors with spur-gear drive |
| DIN 73011-1983 | 汽车.轿车变速齿轮箱的换档设置 | Motor vehicles; gear lay-outs for manual transmissions in passenger cars |
| DIN 75532-1-1976 | 旋转运动的传动装置.第1部分:连接齿轮、中间齿轮、挠性驱动轴与装置的连接方式 | Transmission of rotary motions; Types of connection to gears, intermediate gears, flexible drive shafts and equipment |
| DIN 780-1-1977 | 齿轮的模数系列.直齿圆柱齿轮的模数 | Series of Modules for Gears; Modules for Spur Gears |
| DIN 780-2-1977 | 齿轮用模数系列.第2部分:圆柱蜗杆传动装置的模数 | Series of modules for gears; Modules for cylindrical worm gear transmissions |
| DIN 781-1973 | 机床.变速齿轮的齿数 | Machine tools; numbers of teeth of change gears |
| DIN 8000-1962 | 渐开线正齿轮加工用滚铣刀的设计尺寸与误差.基本术语 | Design Dimensions and Errors of Hobs for Involute Spur Gears; Fundamental Terms |
| DIN 8002-1955 | 金属切削刀具.带离合器驱动槽或键槽模数为1至20 的正齿轮加工用的滚铣刀. | Metal-cutting Tools; Hobs for Spur Gears, with Clutch Drive Slot or Keyway, Modules 1 to 20 |
| DIN 867-1986 | 通用机械和重型机械的圆柱齿轮渐开线齿条的基准齿条齿廓 | Basic rack tooth profiles for involute teeth of cylindrical gears for general engineering and heavy engineering |
| DIN 868-1976 | 齿轮.齿轮副和齿轮系的一般定义和规范参数 | General Definitions and Specification Factors for Gears, Gear Pairs and Gear Trains |
| DIN 87349-1976 | 人工操作用带传输管道系统的遥控传动装置.伞齿轮传动装置 | Remote control gear with transmission tubing for manual operation; bevel gear units |
| DIN 87350-1976 | 用手操作的带传输管的遥控装置.可快速旋转的冠形齿轮装置 | Remote control gear with transmission tubing for manual operation; crown gear units, slewable |
| DIN 87352-1978 | 手动带传动管的遥控传动装置.可回转冠形齿轮装置防护罩 | Remote control gear with transmission tubing for manual operation; protecting hoods for crown gear units, slewable |
| DIN 87375-1976 | 用手操作的带传输管的遥控装置.焊入式带可快速旋转的冠形齿轮装置的控制板操作装置 | Remote control gear with transmission tubing for manual operation; deck operating devices with slewable crown gear unit, welding-in type |
| DIN 87382-1980 | 手动发射管的遥控装置.带可回转冠齿轮的防水的导向槽轴承 | Remote control gear with transmission tubing for manual operation; leading-trough bearings with crown gear units slewable, watertight |
| DIN EN 14203-2004 | 遮帘和百叶窗.带手摇曲柄的齿轮使用能力.要求和试验方法 | Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods; German version EN 14203:2004 |
| DIN EN ISO 10442-2005 | 石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002); English version EN ISO 10442:2002 |
| DIN EN ISO 13691-2003 | 石油和天然气工业.高速专用齿轮机构 | Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002 |
| DIN EN ISO 13929-2001 | 小型船舶.操舵装置.齿轮链接系统 | Small craft - Steering gear - Geared link systems (ISO 13929:2001); German version EN ISO 13929:2001 |
| DIN EN ISO 4263-4-2006 | 石油和相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第4部分:工业齿轮油的程序(ISO 4263-4:2006) | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006); English version of DIN EN ISO 4263-4:2006-05 |
| DIN ISO 14635-1 Berichtigung 1-2007 | 齿轮.FZG试验规程.第1部分:有关齿轮咬接油的载重量的FZG试验方法A/8,3/90 | Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000), Corrigenda to DIN ISO 14635-1:2006-05 |
| DIN ISO 14635-1-2006 | 齿轮.FZG试验程序.第1部分:测试齿轮油压塑性变形承载能力用的A/8、3/90 FZG试验方法 | Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000)English version of DIN ISO 14635-1:2006-05 |
| DIN ISO 2203-1976 | 技术制图.齿轮的传统表示法 | Technical Drawings; Conventional Representation of Gears |
| DIN ISO 3952-2-1995 | 运动学简易表示法.第2部分:摩檫机构、齿轮机构和凸轮机构表示法; 等同采用 ISO 3952-2:1981 | Simplified representation for kinematics - Part 2: Representation of friction and gear mechanisms and cam mechanisms; identical with ISO 3952-2:1981 |
| DIN ISO 7646-1987 | 商用车辆和汽车.齿轮箱法兰.A型. 与ISO 7646, 1986版相同 | Commercial vehicles and buses; gearbox flanges; type A; identical with ISO 7646, edition 1986 |
| DIN ISO 7647-1987 | 商用车辆和汽车.齿轮箱法兰.S型.与ISO 7647, 1986版相同 | Commercial vehicles and buses; gearbox flanges; type S; identical with ISO 7647, edition 1986 |
| DIN ISO 8123-1997 | 道路车辆.起动发动机径节小齿轮 | Road vehicles - Diametral pitch starter motor pinions (ISO 8123:1991) |
| DIN ISO 8667-1993 | 商用车辆和大客车.T型十字齿齿轮箱法兰 | Commercial vehicles and buses; cross-tooth gearbox flanges, type T; identical with ISO 8667:1992 |
| DIN ISO 8719-1988 | 商用车辆和客车.齿轮传动的空气压缩机用的四孔法兰盘 | Commercial vehicles and buses; four-hole flanges for gear-driven air compressors; identical with ISO 8719, edition 1986 |
| DIN ISO 9457-1-1997 | 道路车辆.米制起动器电动机小齿轮.第1部分:普通小齿轮 | Road vehicles - Metric starter motor pinions - Part 1: Currently used pinions (ISO 9457-1:1991) |
| DIN ISO 9457-2-1997 | 道路车辆.米制起动器电动机小齿轮.第2部分:20度压力角小齿轮 | Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle (ISO 9457-2:1994) |
| 编号 | 中文名称 | 英文名称 |