| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI/ASTM D1039-1999
| 用作电绝缘材料的玻璃粘合云母的测试方法 (10.01)
| Method of Testing Glass-Bonded Mica Used as Electrical Insulation (10.01)
|
| ANSI/ASTM D1389-1998
| 薄壁固体电绝缘材料的耐电压检测的试验方法
| Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
|
| ANSI/ASTM D149-1995
| 固体电绝缘材料在工业用电频率下的介电击穿电压和介电强度的试验方法(10.01)
| Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies (10.01)
|
| ANSI/ASTM D149a-1997
| 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法
| Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies (10.01)
|
| ANSI/ASTM D150-1998
| 实心电绝缘材料的交流损耗特性和电容率(介电常数)的试验方法
| Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials
|
| ANSI/ASTM D1822-1999
| 塑料和电绝缘材料破坏拉伸冲击力测试方法
| Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
|
| ANSI/ASTM D1825-2003
| 电气试验用镀铜电绝缘材料及热固性叠层板材的浸蚀和清洗的实施规程
| Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
|
| ANSI/ASTM D2132-2003
| 电绝缘材料的尘雾痕迹和耐腐蚀的试验方法
| Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
|
| ANSI/ASTM D2275-2001
| 表面经过部分放电的固体电绝缘材料电压耐久性测试方法(10.01)
| Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface (10.01)
|
| ANSI/ASTM D2303-1997
| 绝缘材料液体污染、斜面漏电痕迹和侵蚀的试验方法
| Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
|
| ANSI/ASTM D2304-1997
| 刚性电绝缘材料耐热性试验方法
| Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
|
| ANSI/ASTM D2520-2001
| 微波频率和温度为1650℃时实心电绝缘材料综合介电常数测试验方法(10.02)
| Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperature to 1, 650°C (10.02)
|
| ANSI/ASTM D256-1993
| 塑料及电绝缘材料抗冲击性试验方法
| Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials (08.01, 09.02)
|
| ANSI/ASTM D257-1999
| 绝缘材料直流电阻或导电性试验方法
| Test Methods for DC Resistance or Conductance of Insulating Materials
|
| ANSI/ASTM D2655-2000
| 额定电压达到2000伏的电线和电缆交联聚乙烯绝缘材料规范(10.02)
| Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
|
| ANSI/ASTM D2656-2000
| 额定电压2001V到35V的电线和电缆交联聚乙烯绝缘材料规范(10.02)
| Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35V (10.02)
|
| ANSI/ASTM D2770-2001
| 电线及电缆用耐臭氧乙丙橡胶整体绝缘材料及套管规范
| Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
|
| ANSI/ASTM D2802-2003
| 电线和电缆用耐臭氧乙丙橡胶绝缘材料规范
| Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable
|
| ANSI/ASTM D2865-2001
| 电绝缘材料试验用标准和设备的校正惯例(10.02)
| Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing (10.02)
|
| ANSI/ASTM D3151-1988
| 静电应力下的固态电绝缘材料的热损伤的试验方法
| Test Method for Thermal Failure of Solid Electrical Insulating Materials Under Electric Stress
|
| ANSI/ASTM D3386-2005
| 电绝缘材料线性热膨胀系数的试验方法
| Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
|
| ANSI/ASTM D3426-1995
| 用冲击波测定电气固体绝缘材料的电介质击穿电压和介电强度的试验方法(10.02)
| Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves (10.02)
|
| ANSI/ASTM D3636-2006
| 固体电绝缘材料的取样及质量评定的实施
| Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
|
| ANSI/ASTM D3638-1993
| 电绝缘材料的比较跟踪系数的试验方法
| Test Method for Comparative Tracking Index of Electrical Insulating Materials
|
| ANSI/ASTM D374M-1999
| 固体电绝缘材料厚度的试验方法(米制)
| Test Methods for Thickness of Solid Electrical Insulation (Metric) (10.01)
|
| ANSI/ASTM D3755-1997
| 直流电压应力下电气绝缘材料的介电击穿电压和介电强度的试验方法
| Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Electrical Insulating Materials Under Direct-voltage Stress
|
| ANSI/ASTM D3850-1994
| 热解重量分析仪法对固体电绝缘材料快速热降解的试验方法
| Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
|
| ANSI/ASTM D470-2005
| 电线和电缆用交联绝缘材料和护套的试验方法(10.01)
| Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01)
|
| ANSI/ASTM D5288-1997
| 使用多种电极材料(不包括铂)测定电绝缘材料漏电痕迹指数的试验方法
| Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
|
| ANSI/ASTM D5537-2003
| 电缆或光缆绝缘材料在立式电缆槽装置中燃烧时热发散、火焰传播和质量损失测试的试验方法
| Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
|
| ANSI/ASTM D6054-1997
| 试验用电绝缘材料状态调节的规程
| Practice for Conditioning Electrical Insulating Materials for Testing
|
| ANSI/ASTM D6097-2001
| 固体电介绝缘材料有孔水柱增高表示相对抗性的试验方法
| Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
|
| ANSI/ASTM D6097a-2001
| 固体介电绝缘材料对应通气孔水柱上升的电阻力测试方法
| Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
|
| ANSI/ASTM D6113-2003
| 使用锥形量热计对电气或光纤电缆含的绝缘材料的着火试验反应特性进行测定的标准试验方法
| Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
|
| ANSI/ASTM D618-1995
| 测试用电绝缘材料和调理塑料材料的实施规程
| Practice for Conditioning Plastics and Electrical Insulating Materials for Testing (08.01)
|
| ANSI/ASTM D6272-2000
| 利用四点结合法进行非增强和增强塑料及电气绝缘材料的柔韧性试验方法
| Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
|
| ANSI/ASTM D785-1998
| 塑料及电绝缘材料洛氏硬度测试方法(08.01)
| Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials (08.01)
|
| ANSI/ICEA T-28-562-2003
| 测量聚合物绝缘材料热蠕变性的试验方法
| Test Method For Measurement of Hot Creep of Polymeric Insulations
|
| ANSI/IEEE 98-2002
| 固体电绝缘材料热评价用试验程序的编制
| Thermal Evaluation of Solid Electrical Insulating Materials, Preparation of Test Procedures for the
|
| ANSI/IPC 4202-2002
| 柔性印制线路用柔性裸绝缘材料
| Flexible Bare Dielectrics for Use in Flexible Printed Wiring
|
| ANSI/IPC 4204-2002
| 制备柔性印制线路用的涂柔性金属的绝缘材料
| Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Wiring
|
| ANSI/NFPA 274-2003
| 管道绝缘材料燃烧特性评价的标准试验方法
| Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation
|
| ANSI/SAE J1351-1993
| 绝缘材料的加热气味的试验
| Insulation Materials, Hot Odor Test for
|
| ANSI/SAE J1389-1993
| 绝缘材料的腐蚀试验
| Corrosion Test for Insulation Materials
|
| ANSI/SCTE 12-2001
| 干线、馈电和配电同轴电缆中间导线与绝缘材料的粘接
| Center Conductor Bond to Dielectric for Trunk, Feeder and Distribution Coaxial Cables
|
| ANSI/SCTE 13-2001
| 干线、馈电和配电同轴电缆用绝缘材料漏汽试验方法
| Dielectric Air Leakage Test Method For Trunk, Feeder and Distribution Coaxial Cable
|
| ASTM C 1014-2003
| 喷施的矿物纤维吸热和吸音绝缘材料标准规范
| Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
|
| ASTM C 1029a-2005
| 喷涂硬质蜂窝式聚氨酯热绝缘材料的标准规范
| Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 1050-1991
| 刚性蜂窝状聚氨基甲酸乙酯--纤维素纤维组合屋面绝缘材料
| Rigid Cellular Polystyrene-Cellulosic Fiber Composite Roof Insulation
|
| ASTM C 1071-2005
| 纤维玻璃管道衬里绝缘材料(隔热和吸音材料)标准规范
| Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
|
| ASTM C 1104/C 1104M-2000
| 测定未覆面矿物纤维绝缘材料蒸汽的吸收率的标准试验方法
| Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
|
| ASTM C 1126-2004
| 光面或非光面硬质多孔酚醛热绝缘材料标准规范
| Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
|
| ASTM C 1129-1989
| 通过给凸面阀门及法兰增加热绝缘材料评估蓄热量的标准实施规程
| Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
|
| ASTM C 1134-1990
| 部分浸入后刚性热绝缘材料水分保持标准试验方法
| Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
|
| ASTM C 1224-2003
| 建筑物用反射绝缘材料标准规范
| Standard Specification for Reflective Insulation for Building Applications
|
| ASTM C 1488-2004
| 纤维素疏松填充绝缘材料模拟老化的标准实施规程
| Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
|
| ASTM C 1497-2004
| 纤维素纤维稳定热绝缘材料标准规范
| Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
|
| ASTM C 1511-2004
| 玻璃纤维绝缘材料(飞行器型)的水分保持(抵抗性)特征测定的标准试验方法
| Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)
|
| ASTM C 1559-2004
| 玻璃纤维衬垫绝缘材料芯吸性测定的标准试验方法(飞行器类型)
| Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)
|
| ASTM C 1574-2004
| 喷射松填充矿物纤维热绝缘材料膨胀密度测定的标准指南
| Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
|
| ASTM C 1594-2004
| 聚酰亚胺硬质泡沫热绝缘材料的标准规范
| Standard Specification for Polyimide Rigid Cellular Thermal Insulation
|
| ASTM C 1616-2005
| 称重法测定无机绝缘材料含水量的标准试验方法
| Standard Test Method for Determining the Moisture Content of Inorganic Insulation Materials by Weight
|
| ASTM C 1617-2005
| 金属水腐蚀热绝缘材料中浸出的含离子萃取溶液的定量加速实验室评定的标准实施规程
| Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
|
| ASTM C 335a-2005
| 管绝缘材料稳态传热特性的标准试验方法
| Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
|
| ASTM C 351-1992
| 热绝缘材料的平均比热的试验方法
| Test Method for Mean Specific Heat of Thermal Insulation
|
| ASTM C 351b-1992
| 热绝缘材料的平均比热的标准试验方法
| Standard Test Method for Mean Specific Heat of Thermal Insulation
|
| ASTM C 585-1990
| 公称尺寸的管子(NPS系统)用刚性热绝缘材料的内外直径的标准实施规程
| Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System))
|
| ASTM C 762-1986
| 高温下用喷制纤维热绝缘材料应用规程
| Application of Spray-Applied Fibrous Thermal Insulation for Elevated Temperatures
|
| ASTM C 854-1990
| 金属制反射管绝缘材料抗外部荷载力的测试方法
| Test Method for Resistance to External Loads on Metal Reflective Pipe Insulation
|
| ASTM C 870-1996
| 热绝缘材料的调整的标准实施规程
| Standard Practice for Conditioning of Thermal Insulating Materials
|
| ASTM C 991-2003
| 金属建筑物用挠性玻璃纤维绝缘材料标准规范
| Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings
|
| ASTM D 1351-2002
| 电线和电缆用热塑性聚乙烯绝缘材料的标准规范
| Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
|
| ASTM D 1389a-1997
| 薄固体电绝缘材料的保护电压试验的标准试验方法
| Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
|
| ASTM D 149a-1997
| 固体电绝缘材料在商用电源频率下的介电击穿电压和介电强度的标准试验方法
| Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
|
| ASTM D 150-1998
| 固体电绝缘材料(恒定电介质)的交流损耗特性和介电常数的标准试验方法
| Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
|
| ASTM D 1523-2000
| 工作温度为90℃的电线和电缆用合成橡胶绝缘材料的标准规范
| Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation
|
| ASTM D 1825-2003
| 电气试验用镀铜电绝缘材料及热固性层压材料的浸蚀和清洗标准实施规范
| Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
|
| ASTM D 1933-2003
| 作为电绝缘材料的氮气的标准规范
| Standard Specification for Nitrogen Gas as an Electrical Insulating Material
|
| ASTM D 2132-2003
| 电绝缘材料的尘雾起痕和耐腐蚀性的标准试验方法
| Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
|
| ASTM D 2219-2002
| 电线和电缆用聚氯乙烯绝缘材料(工作温度60℃)的标准规范
| Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
|
| ASTM D 2275-2001
| 固体电绝缘材料表面对局部放电(电晕)的耐电压性标准试验方法
| Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
|
| ASTM D 2303-1997
| 绝缘材料液态污染、斜面漏电痕迹和腐蚀的标准试验方法
| Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
|
| ASTM D 2304-1997
| 硬质电绝缘材料耐热性的标准试验方法
| Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
|
| ASTM D 2520-2001
| 在微波频率和1650℃时固体电绝缘材料复合介电常数的标准试验方法
| Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC
|
| ASTM D 257-1999
| 绝缘材料的直流电阻或电导率的标准试验方法
| Standard Test Methods for DC Resistance or Conductance of Insulating Materials
|
| ASTM D 2633-2002
| 电线及电缆用热塑绝缘材料和护套的标准试验方法
| Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
|
| ASTM D 2655-2000
| 额定电压为0到2000V的电线和电缆用交联聚乙烯绝缘材料的标准规范
| Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
|
| ASTM D 2656-2000
| 疃ǖ缪刮001到35000V的电线和电缆用交联聚乙烯绝缘材料的标准规范
| Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
|
| ASTM D 2770-2001
| 电线及电缆用耐臭氧的乙丙橡胶整体绝缘材料及套管材料标准规范
| Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
|
| ASTM D 2802-2003
| 电线及电缆用耐臭氧乙烯烃聚合物绝缘材料的标准规范
| Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
|
| ASTM D 2865-2001
| 电绝缘材料试验用标准和设备校正的标准规程
| Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
|
| ASTM D 3151-1988
| 在电应力作用下电绝缘材料的热损坏的试验方法
| Standard Test Method for Thermal Failure of Solid Electrical Insulating Materials Under Electric Stress
|
| ASTM D 3277-1995
| 经油浸渍的纤维素绝缘材料含水量的标准试验方法
| Standard Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation
|
| ASTM D 3283-1998
| 作为电绝缘材料用的气体
| Air as an Electrical Insulating Material
|
| ASTM D 3376-1988
| 制造电绝缘材料用纸浆的取样及试验的标准试验方法
| Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
|
| ASTM D 3426-1997
| 用脉冲波法测定固体电绝缘材料的电介质击穿电压及抗电强度的标准试验方法
| Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
|
| ASTM D 3554-2001
| 75℃工作条件下电线及电缆用不留痕迹的黑色热塑高密度聚乙烯绝缘材料标准规范
| Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation
|
| ASTM D 3555-2001
| 90℃工作条件下电线及电缆用不留痕迹的黑色交联聚乙烯绝缘材料标准规范
| Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90oC Operation
|
| ASTM D 3638-1993
| 电绝缘材料比较漏电痕迹指数的标准试验方法
| Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
|
| ASTM D 374-1999
| 固体电绝缘材料厚度的标准试验方法
| Standard Test Methods for Thickness of Solid Electrical Insulation
|
| ASTM D 374M-1999
| 固体电绝缘材料厚度的标准试验方法(米制)
| Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)
|
| ASTM D 3755-1997
| 在直流电压作用下固体电绝缘材料的介电击穿电压及介电强度的标准试验方法
| Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
|
| ASTM D 3850-1994
| 用热解重量法测定固体电绝缘材料快速热降解的标准试验方法
| Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
|
| ASTM D 470-2005
| 电线和电缆用交联绝缘材料与套管的标准试验方法
| Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
|
| ASTM D 495-1999
| 固体电绝缘材料的耐高压低电流干电弧性能的测试方法
| Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
|
| ASTM D 5288-1997
| 使用多电极材料测定电绝缘材料追踪摄影系数的标准试验方法
| Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
|
| ASTM D 5424-2005
| 电缆或光缆中绝缘材料在立式电缆槽结构中燃烧时的烟雾遮蔽性标准试验方法
| Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
|
| ASTM D 5537-2003
| 电缆或光缆绝缘材料在立式电缆槽装置中燃烧时热发散、火焰传播、烟的昏暗度和质量损失测试的标准试验方法
| Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
|
| ASTM D 6054-1997
| 试验用调整电气绝缘材料的标准操作规程
| Standard Practice for Conditioning Electrical Insulating Materials for Testing
|
| ASTM D 6097a-2001
| 固体介电绝缘材料中有通气孔的水柱提升的相对阻力测定的标准试验方法
| Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
|
| ASTM D 6113-2003
| 用锥形量热计对电缆或光缆中绝缘材料的着火试验反应特性测定的标准试验方法
| Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
|
| ASTM D 6272-2002
| 通过四点弯曲对非增强和增强塑料和电气绝缘材料的柔韧特性的标准试验方法
| Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
|
| ASTM D 784-2003
| 电绝缘材料用橙色紫胶和其他印度虫胶标准规范
| Standard Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation
|
| ASTM D 785-2003
| 塑料和电绝缘材料洛氏硬度的标准试验方法
| Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
|
| ASTM D 790-2003
| 未增强和增强塑料及电绝缘材料的挠曲性的标准试验方法
| Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
|
| ASTM D 952-2002
| 薄板塑料和电绝缘材料粘结强度的标准试验方法
| Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
|
| ASTM E 2231-2002
| 表面燃烧特性评估用管和管绝缘材料的样品制备和安装的标准实施规范
| Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
|
| ASTM E 285-1980
| 热绝缘材料的氧乙炔烧蚀试验方法
| Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
|
| ASTM E 936-1998
| 使用钢盖板、预成形屋面绝缘材料和沥青组合屋面的屋面系统组件
| Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
|
| ASTM F 683a-2003
| 管道和机械用热绝缘材料选择和应用的标准规程
| Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
|
| ASTM F 777-1989
| 与火焰成60°角时电线绝缘材料的耐火性的试验方法
| Test Method for Resistance of Electrical Wire Insulation Materials to Flame at 60 Degrees
|
| IEEE 117-1974
| 不规则缠绕交流电机绝缘材料系统的评定试验程序
| (Test procedure for evaluation of systems of insulation materials for random-wound ac electric machinery)
|
| IEEE 1276-1997
| 油冷电力变压器中高温绝缘材料使用的试用指南
| (Trial-use guide for the application of high-temperature insulation materials in liquid-immersed power transformers)
|
| IEEE 98-2002
| 固体电绝缘材料热评定用测试程序的编制
| (Preparation of test procedures for the thermal evaluation of solid electrical insulation materials)
|
| UL 1446-1997
| 绝缘材料系统.概论
| (Systems of insulating materials - General )
|
| UL 2171-1993
| 通过更迭制冷剂对产品进行现场转换和改型.绝缘材料和制冷剂兼容性
| (Field conversion/retrofit of products to change to an alternative refrigerant - Insulating material and refrigerant compatibility )
|
| UL 2395-2002
| 加热和冷却设备上固定热绝缘材料用胶粘剂
| (Adhesives for use in heating and colling appliances to secure thermal isolation materials )
|
| 编号 | 中文名称 | 英文名称 |
|---|