| 编号 | 中文名称 | 英文名称 |
|---|
| IEC 60092-351-2004
| 船舶电气设施.第351部分:船载和海上成套动力装置、远程通讯及控制数据电缆用绝缘材料
| Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables
|
| IEC 60093-1980
| 固体绝缘材料体电阻率和面电阻率的试验方法
| Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
|
| IEC 60112 Corrigendum 1-2003
| 固体绝缘材料的比较起痕指数和耐起痕指数的测定方法
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
| IEC 60112 Corrigendum 2-2003
| 固体绝缘材料的比较起痕指数和耐起痕指数的测定方法
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials; Corrigendum 2
|
| IEC 60112-2003
| 固体绝缘材料的比较起痕指数和耐泄痕指数的测定方法
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
| IEC 60167-1964
| 测定固体绝缘材料绝缘电阻的试验方法
| Methods of test for the determination of the insulation resistance of solid insulating materials
|
| IEC 60212-1971
| 固体电气绝缘材料试验前和试验时采用的标准条件
| Standard conditions for use prior to and during the testing of solid electrical insulating materials
|
| IEC 60216-1-2001
| 电气绝缘材料 耐热性 第1部分：老化规程和试验结果的评价
| Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results
|
| IEC 60216-2-2005
| 电气绝缘材料.耐热性.第2部分:电气绝缘材料耐热性测定.试验标准的选择
| Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
|
| IEC 60216-3-2006
| 电绝缘材料.耐热性能.第3部分:耐热性计算说明
| Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
|
| IEC 60216-4-1-2006
| 电气绝缘材料.耐热特性.第4-1部分:老化烘箱.单室烘箱
| Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
|
| IEC 60216-4-2-2000
| 电气绝缘材料 耐热性能 第4-2部分:热老化烘箱 最高至300℃的精密烘炉
| Electrical insulating materials - Thermal endurance porperties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 °C
|
| IEC 60216-4-3-2000
| 电气绝缘材料 耐热性能 第4-3部分:老化烘箱 多室烘箱
| Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
|
| IEC 60216-5-2003
| 电绝缘材料.耐热特性.第5部分:绝缘材料的相对耐热指数(RTE)的测定
| Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
|
| IEC 60216-6-2006
| 电气绝缘材料.耐热性能.第6部分:使用固定时间框架法测定绝缘材料的耐热指数(TI和RTE)
| Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
|
| IEC 60243-1-1998
| 固体绝缘材料电气强度试验方法 第1部分:工频下试验
| Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies
|
| IEC 60243-2-2001
| 绝缘材料的电气强度 试验方法 第2部分：对直流电压试验的附加要求
| Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
|
| IEC 60243-3-2001
| 绝缘材料的电气强度 试验方法 第3部分：对1.2/50μs冲击试验的附加要求
| Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 μs impulse tests
|
| IEC 60250-1969
| 测定电气绝缘材料在工频、音频、射频(包括米波长)下电容率和电介质损耗因数的推荐方法
| Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths
|
| IEC 60343-1991
| 测定绝缘材料相对耐表面放电击穿能力的推荐试验方法
| Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
|
| IEC 60345-1971
| 绝缘材料在升高温度下电阻和电阻率的试验方法
| Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
|
| IEC 60371-1-2003
| 云母基绝缘材料规范.第1部分:定义和一般要求
| Specification for insulating materials based on MICA - Part 1: Definitions and general requirements
|
| IEC 60371-2-2004
| 以云母为基材的绝缘材料规范.第2部分:试验方法
| Specification for insulating materials based on mica - Part 2: Methods of test
|
| IEC 60371-3-1-2006
| 以云母为基材的绝缘材料规范.第3部分:单项材料规范.活页1:换向器隔板及材料
| Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials
|
| IEC 60371-3-2-2005
| 以云母为基材的绝缘材料.第3部分:单一材料规范.活页2:云母纸
| Insulating materials based on mica - Part 3: Specifications for indvidual materials - Sheet 2: Mica paper
|
| IEC 60371-3-3-1983
| 以云母为基材的绝缘材料规范 第3部分:单项材料规范 活页3:加热设备用硬质云母材料
| Specification for insulating materials based on mica. Part 3 : Specifications for individual materials. Sheet 3: Specification for rigid mica materials for heating equipment
|
| IEC 60371-3-4-1992
| 以云母为基材的绝缘材料规范 第3部分:单项材料规范 活页4:聚酯薄膜补强B阶环氧树脂粘合云母纸
| Specification for insulating materials based on mica; part 3: specifications for individual materials; sheet 4: polyester film-backed mica paper with a B-stage epoxy resin binder
|
| IEC 60371-3-5-2005
| 以云母为基材的绝缘材料.第3部分:单项材料规范.活页5:后浸渍用玻璃布补强环氧树脂粘合云母纸
| Insulating materials based on mica - Part 3: Specification for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)
|
| IEC 60371-3-6-1992
| 以云母为基材的绝缘材料规范 第3部分:单项材料规范 活页6:补强玻璃布B阶环氧树脂粘合云母纸
| Specification for insulating materials based on mica; part 3: specifications for individual materials; sheet 6: glass-backed mica paper with a B-stage epoxy resin binder
|
| IEC 60371-3-7 Corrigendum 1-1995
| 以云母为基材的绝缘材料.第3部分:单项材料规范.活页7:单根导线缠绕用环氧树脂粘合聚脂薄膜云母纸
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
|
| IEC 60371-3-7-1995
| 以云母为基材的绝缘材料 第3部分:单项材料规范 活页7:单根导线缠绕用环氧树脂粘合聚脂薄膜云母纸
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
|
| IEC 60371-3-8 Corrigendum 1-1995
| 以云母为基材的绝缘材料.第3部分:单项材料规范.活页8:阻燃安全电缆用云母纸带
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
|
| IEC 60371-3-8-1995
| 以云母为基材的绝缘材料 第3部分:单项材料规范 活页8:阻燃安全电缆用云母纸带
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
|
| IEC 60371-3-9 Corrigendum 1-1995
| 以云母为基材的绝缘材料.第3部分:单项材料规范.活页9:塑型云母板
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
|
| IEC 60371-3-9-1995
| 以云母为基材的绝缘材料 第3部分:单项材料规范 活页9:塑型云母板
| Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
|
| IEC 60377-1-1973
| 绝缘材料在300MHz以上频率下介电性能测定方法 第1部分:总则
| Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 1 : General
|
| IEC 60377-2-1977
| 绝缘材料在300MHz以上频率下介电性能测定方法 第2部分:谐振法
| Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 2 : Resonance methods
|
| IEC 60426-1973
| 测定绝缘材料所引起的电解腐蚀的试验方法
| Test methods for determining electrolytic corrosion with insulating materials
|
| IEC 60450-2004
| 新的和老化的纤维素电气绝缘材料的粘均聚合度的测量
| Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
|
| IEC 60544-1-1994
| 电气绝缘材料 电离辐射效应的测定 第1部分:辐射的相互作用和剂量
| Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry
|
| IEC 60544-2-1991
| 测定电离辐射对绝缘材料的效应的指南 第2部分:辐照和试验的规程
| Guide for determining the effects of ionizing radiation on insulating materials; part 2: procedures for irradiation and test
|
| IEC 60544-4-2003
| 电绝缘材料.电离辐射效应的测定.第4部分:在辐射环境中工作的分类体系
| Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
|
| IEC 60544-5-2003
| 电绝缘材料.确定电离辐射的影响.第5部分:在使用过程中的老化评定方法
| Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
|
| IEC 60587-1984
| 评定在严酷环境条件下使用的电气绝缘材料耐起痕和耐蚀损的试验方法
| Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
|
| IEC 60589 Corrigendum 1-1978
| 测定电气绝缘材料中离子杂质的液体萃取试验方法
| Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
|
| IEC 60589-1977
| 测定电气绝缘材料中离子杂质的液体萃取试验方法
| Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
|
| IEC 60614-2-2 AMD 1-1993
| 电气装置用导管规范 第2-2部分:绝缘材料刚性无螺纹导管的特殊规范 修改1
| Specification for conduits for electrical installations; part 2: particular specifications for conduits; section 2: rigid plain conduits of insulting materials; amendment 1
|
| IEC 60614-2-2-1980
| 电气装置用导管规范 第2-2部分:绝缘材料刚性无螺纹导管的特殊规范
| Specification for conduits for electrical installations. Part 2 : Particular specification for rigid plain conduits of insulating materials
|
| IEC 60614-2-3-1990
| 电气装置用导管规范 第2部分:导管的特殊规范 第3节:绝缘材料柔韧导管
| Specification for conduits for electrical installations; part 2: particular specifications for conduits; section three: pliable conduits of insulating material
|
| IEC 60614-2-4 AMD 1-1993
| 电气装置用导管规范 第2部分:导管的特殊规范 第4节:绝缘材料柔韧自复性导管 修改1
| Specification for conduits for electrical installations; part 2: particular specifications for conduits; section 4: pliable self-recovering conduits of insulting materials; amendment 1
|
| IEC 60614-2-4-1985
| 电气装置用导管规范 第2部分:导管的特殊规范 第4节:绝缘材料柔韧自复性导管
| Specification for conduits for electrical installations. Part 2 : Section four: Pliable self-recovering conduits of insulating materials
|
| IEC 60672-1-1995
| 陶瓷和玻璃绝缘材料 第1部分:定义和分类
| Ceramic and glass insulating materials - Part 1: Definitions and classification
|
| IEC 60672-2-1999
| 陶瓷和玻璃绝缘材料 第2部分:试验方法
| Ceramic and glass insulating materials - Part 2: Methods of test
|
| IEC 60672-3-1997
| 陶瓷和玻璃绝缘材料 第3部分:单项材料规范
| Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
|
| IEC 60829-1988
| 暴露在电热丝源下的固体绝缘材料可燃性的测定方法
| Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources
|
| IEC 60893-1-2004
| 绝缘材料.电工用热固性树脂工业硬质层压片.第1部分:定义、名称和一般要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
|
| IEC 60893-3-1-2003
| 绝缘材料.电工用热固性树脂工业硬质层压片.第3-1部分:专用材料规范.对工业硬质层压片类型的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials; Requirements for types of industrial rigid laminated sheets
|
| IEC 60893-3-2-2003
| 绝缘材料.电工用热固性树脂工业硬质层压片.第3-2部分:专用材料规范.对环氧树脂硬质层压片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials; Requirements for rigid laminated sheets based on epoxide resins
|
| IEC 60893-3-3-2003
| 绝缘材料.电工用热固性树脂工业硬质层压片.第3-3部分:专用材料规范.对三聚氰胺树脂硬质层压片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins
|
| IEC 60893-3-4-2003
| 绝缘材料.电工用热固性树脂工业硬质层压片.第3-4部分:专用材料规范.对酚醛树脂硬质层压片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins
|
| IEC 60893-3-5-2003
| 绝缘材料.电工用热固性树脂工业硬质层压片.第3-5部分:专用材料规范.对聚酯树脂硬质层压片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials; Requirements for rigid laminated sheets based on polyester resins
|
| IEC 60893-3-6-2003
| 绝缘材料.电工用热固性树脂工业硬质层压片.第3-6部分:专用材料规范.对硅树脂硬质层压片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials; Requirements for rigid laminated sheets based on silicone resins
|
| IEC 60893-3-7-2003
| 绝缘材料.电工用热固性树脂工业硬质层压片.第3-7部分:专用材料规范.对聚酰亚胺树脂基刚性层压片的要求
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials; Requirements for rigid laminated sheets based on polyimide resins
|
| IEC 60903 Corrigendum 1-2003
| 带电作业.绝缘材料手套
| Live working - Gloves of insulating material
|
| IEC 60903 Corrigendum 2-2005
| 带电作业.绝缘材料手套.勘误2
| Live working - Gloves of insulating material; Corrigendum 2
|
| IEC 60903-2002
| 带电作业.绝缘材料手套
| Live working - Gloves of insulating material
|
| IEC 60984 AMD 1-2002
| 带电作业用绝缘材料衣袖.修改件1
| Sleeves of insulating material for live working; Amendment 1
|
| IEC 60984 Edition 1.1-2002
| 带电作业用绝缘材料衣袖
| Sleeves of insulating material for live working
|
| IEC 61006-2004
| 电气绝缘材料.玻璃化转变温度测定用试验方法
| Electrical insulating materials - Methods of test for the determination of the glass transition temperature
|
| IEC 61035-2-2-1993
| 电气装置用导管配件规范 第2部分:特殊要求 第2节:绝缘材料导管配件
| Specification for conduit fittings for electrical installations; part 2: particular specifications; section 2: conduit fittings of insulating material
|
| IEC 61111 AMD 1-2002
| 电器用绝缘材料垫.修改件1
| Matting of insulating material for electrical purposes; Amendment 1
|
| IEC 61111 Corrigendum 1-2000
| 电工用绝缘材料垫
| Matting of insulating material for electrical purposes
|
| IEC 61111 Edition 1.1-2002
| 电器用绝缘材料垫
| Matting of insulating material for electrical purposes
|
| IEC 61111-1992
| 电工用绝缘材料垫
| Matting of insulating material for electrical purposes
|
| IEC 61112 AMD 1-2002
| 电器用绝缘材料套.修改件1
| Blankets of insulating material for electrical purposes; Amendment 1
|
| IEC 61112 Corrigendum 1-2000
| 电工用绝缘材料毯
| Blankets of insulating material for electrical purposes
|
| IEC 61112 Edition 1.1-2002
| 电器用绝缘材料套
| Blankets of insulating material for electrical purposes
|
| IEC 61112-1992
| 电工用绝缘材料毯
| Blankets of insulating material for electrical purposes
|
| IEC 61181-1993
| 浸渍绝缘材料 溶解气体分析(DGA)应用于电气设备的工厂试验
| Impregnated insulating materials; application of dissolved gas analysis (DGA) to factory tests on electrical equipment
|
| IEC 61212-1-2006
| 绝缘材料.电工用热固性树脂基工业刚性圆形层压管和棒.第1部分:定义、名称与符号、一般要求
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designation and general requirements
|
| IEC 61212-3-1-2006
| 绝缘材料.电工用热固性树脂基工业刚性圆形层压管和棒.第3部分:单项材料规范.活页1:圆形层压轧制管
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes
|
| IEC 61212-3-2-2006
| 绝缘材料.电工用基于热固树脂的工业刚性圆形层压管材和杆材.第3部分:单项材料规范.活页2:圆形层压模制管材
| Insulating materials - Industrial rigid round lamineted tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
|
| IEC 61212-3-3-2006
| 绝缘材料.电工用热固性树脂工业硬质圆形层压管和棒.第3部分:单项材料规范.活页3:圆形层压模制棒
| Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
|
| IEC 61234-1-1994
| 电气绝缘材料水解稳定性的试验方法 第1部分:塑料薄膜
| Method of test for the hydrolytic stability of electrical insulating materials; part 1: plastic films
|
| IEC 61234-2-1997
| 电气绝缘材料 水解稳定性的试验方法 第2部分:模塑热固性材料
| Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets
|
| IEC 61302 Corrigendum 1-1995
| 电气绝缘材料.评定耐起痕和耐蚀损的方法.旋转轮沉浸试验
| Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test
|
| IEC 61302-1995
| 电气绝缘材料 评定耐起痕和耐蚀损的方法 旋转轮沉浸试验
| Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test
|
| IEC 61478 AMD 1-2003
| 带电作业.绝缘材料做成的梯子.修改件1
| Live working - Ladders of insulating material; Amendment 1
|
| IEC 61478-2001
| 带电作业 绝缘材料梯
| Live working - Ladders of insulating material
|
| IEC 61479 AMD 1-2002
| 带电作业.绝缘材料制的软导体套(线性软管).修改1
| Live working - Flexible conductor covers (line hoses) of insulating material; Amendment 1
|
| IEC 61479 Edition 1.1-2002
| 带电作业.绝缘材料制的软导体套(线性软管)
| Live working - Flexible conductor covers (line hoses) of insulating material
|
| IEC 61479-2001
| 带电作业 绝缘材料软导体套（线路管）
| Live working - Flexible conductor covers (line hoses) of insulating material
|
| IEC 61621-1997
| 干燥实心绝缘材料 耐高压低电流电弧放电的试验
| Dry, solid insulating materials - Resistance test to high-voltage, low current arc discharges
|
| IEC 62011-1-2002
| 绝缘材料.电气设备用工业刚性模制矩形和六边形横截面的热固性树脂基薄壁管材和棒材.第1部分:定义,命名和一
| Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
|
| IEC 62011-2-2004
| 绝缘材料.电气设备用工业刚性模制矩形和六角形横截面的热固性树脂基叠层管材和棒材.第2部分:试验方法
| Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test
|
| IEC 62011-3-1-2003
| 绝缘材料.电气设备用基于热固性树脂的矩形和六边形横截面的工业刚性模制层压管材和杆材.第3-1部分:单项材料
| Insulating materials - Industrial, rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials; Tubes and rods of rectangular and hexagonal cross-section
|
| IEC/TR 60893-4-2003
| 绝缘材料.电工用热固性树脂基绝缘刚性层压薄板.第4部分:代表值
| Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
|
| IEC/TR 61074-1991
| 用差示扫描量热法对电气绝缘材料的结晶、熔化温度和热量的测定
| Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
|
| IEC/TR2 61251-1993
| 电气绝缘材料 交流电压耐久性评定 一般介绍
| Electrical insulating materials; A.C. voltage endurance evaluation; introduction
|
| IEC/TS 60076-14-2004
| 电力变压器.第14部分:使用高温绝缘材料的液浸式电力变压器的设计和应用
| Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials
|
| IEC/TS 61934-2006
| 电绝缘材料和系统.在短上升时间和反复电压脉冲下局部放电(PD)的电测量
| Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
|
| IEC/TS 61956-1999
| 评价绝缘材料中水份枝状组织的试验方法
| Methods of test for the evaluation of water treeing in insulating materials
|
| 编号 | 中文名称 | 英文名称 |
|---|