法国绝缘材料标准(NF insulating material standards)

ANSI |  BS |  DIN |  EN |  GB |  IEC |  JIS |  NF |  DIC
编号中文名称英文名称
NF A49-751-1994 地下热水管网的预隔热粘结管道系统.钢制供水管配件、聚氨基甲酸乙酯热绝缘材料以及高密度聚乙烯外壳 (Preinsulated bonded pipe systems for underground hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
NF C18-404-1993 带电作业用的绝缘材料袖套 (Sleeves of insulating material for live working.)
NF C18-415-1993 带电作业用的绝缘材料手套和连指手套规范 (Specification for gloves and mitts of insulating material for live working.)
NF C18-478-2002 带电作业.绝缘材料作成的梯子 (Live working - Ladders of insulating material.)
NF C18-479-2001 带电作业.绝缘材料用柔性导线外壳(软管) (Live working - Flexible conductor covers (line hoses) of insulating material.)
NF C18-479/A1-2003 带电作业.绝缘材料的柔性导体封盖物 (Live working - Flexible conductor covers (line hoses) of insulating material.)
NF C26-011-1-2003 绝缘材料.电工用工业刚性模制矩形和六边形横截面的热固性树脂基层压管材和棒材.第1部分:定义、名称与符号和 (Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1 : definitions, des)
NF C26-111-2003 云母基绝缘材料规范.第1部分:定义和一般要求 (Specification for insulating materials based on mica - Part 1 : definitions and general requirements.)
NF C26-112-1997 云母基绝缘材料规范.第2部分:试验方法 (Specification for insuslating materials based on mica. Part 2 : methods of test.)
NF C26-113-1-1995 云母基绝缘材料规范.第3部分:单项材料规范.第1活页:换向器隔板和材料 (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 1 : commutator separators and materials.)
NF C26-113-2-1995 云母基绝缘材料规范.第3部分:单一材料规范.第2活页:云母纸 (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 2 : mica paper.)
NF C26-113-3-1995 云母基绝缘材料规范.第3部分:单项材料规范.第3活页:加热设备用硬质云母材料 (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 3 : specification for rigid mica materials for heating equipment.)
NF C26-113-4-1995 云母基绝缘材料规范.第3部分:单项材料规范.第4活页:用B级环氧树脂粘合剂粘结的聚酯薄膜衬底云母纸 (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 4 : polyester film-backed mica paper with a B-stage epoxy resin binder.)
NF C26-113-5-1995 云母基绝缘材料规范.第3部分:单项材料规范.第5活页:用环氧树脂粘合剂粘结的待浸渍处理的玻璃纤维织物衬底云 (Specification for insulating materials based on mica. Part 3 : specificatins for individual materials. Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (vpi).)
NF C26-113-6-1995 云母基绝缘材料规范.第3部分:单项材料规范.第6活页:用B级环氧树脂粘合剂粘结的玻璃纤维织物衬底云母纸 (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 6 : glass-backed mica paper with a B-stage epoxy resin binder.)
NF C26-113-7-1996 云母基绝缘材料规范.第3部分:单项材料规范.第7活页:单导体胶带用带环氧树脂粘结剂的聚酯薄膜云母纸 (Insulating materials based on mica. Part 3 : specification of individual materials. Sheet 7 : polyester film mica paper with an expoxy resin binder for single conductor taping.)
NF C26-113-8-1996 云母基绝缘材料规范.第3部分:单项材料规范.第8活页:抗燃安全电缆用云母纸带 (Insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 8 : mica paper tapes for flame-resistant security cables.)
NF C26-113-9-1996 云母基绝缘材料规范.第3部分:单项材料规范.第9活页:单项材料规范.第9活页:压制胶合云母板 (Insulating materials based on mica. Part 3 : specification for individual materials. Sheet 9 : moulding micanite.)
NF C26-121-1971 固体绝缘材料.云母基制品.选型件.规则 (SOLID INSULATING MATERIALS. MICACEOUS PRODUCTS - MOULDED PARTS. REQUIREMENTS.)
NF C26-122-1971 固体绝缘材料.成卷云母基制品.规范 (SOLID INSULATING MATERIALS. MICACEOUS PRODUCTS IN ROLLS. SPECIFICATIONS.)
NF C26-125-1972 固体绝缘材料.软云母基制品.规范 (SOLID INSULATING MATERIALS. FLEXIBLE MICA PRODUCTS. SPECIFICATION.)
NF C26-170-1984 固体绝缘材料.电气用刚纸.一般要求 (Solid insulating materials. Vulcanized fibre for electrical purposes. General requirements.)
NF C26-200-1973 绝缘材料试验方法.电气绝缘材料在试验前和试验中应遵循的条件 (Methods of testing insulating materials. Standard conditions for usterials.)
NF C26-202-1975 绝缘材料.老化试验数据的统计分析 (Insulating materials statistical analysis of ageing test data.)
NF C26-203-1985 试验方法.用绕管法评价软片型绝缘材料耐热性的试验方法 (Test method for evaluating thermal endurance of flexible sheet materials using the wrappel tube method.)
NF C26-212-1989 测定暴露于电热金属线源时固体电绝缘材料可燃性的试验方法. (Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources.)
NF C26-214-1993 用差式扫描量热法测定电绝缘材料溶化和结晶的热量和温度 (Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry.)
NF C26-215-1982 绝缘材料的试验方法.固体电绝缘材料体电阻率和表面电阻率的试验方法 (Method of testing insulating materials. Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials.)
NF C26-218-1972 绝缘材料的试验方法. 高温绝缘材料的绝缘电阻率和横向电阻率的试验方法 (Methods of testing insulating materials. Method of test for electrial resistance and resistivity of insulating materials at elevated temperatures.)
NF C26-220-1980 绝缘材料的试验方法.潮湿条件下固体绝缘材料的电阻指数和渗透特性的测定方法 (Method of testing insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions.)
NF C26-220-2003 固体绝缘材料的比较起痕指数和耐泄痕指数的测定方法 (Method for the determination of the proof and the comparative tracking indices of solid insulating materials.)
NF C26-221-1986 电绝缘材料的测试方法.评估恶劣的环境条件下使用的电绝缘材料的击穿和腐蚀电阻 (Methods of testing isulating materials. Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions.)
NF C26-222-1995 电气绝缘材料.抗电弧和侵蚀性的评定方法.常规轮浸蚀试验 (Electrical insulating materials. Method to evaluate the resistance to tracking and erosion. Rotating wheel dip test.)
NF C26-226-1998 绝缘材料介电强度.试验方法.第1部分:功率频率试验 (Electrical strength of insulating materials. Test methods. Part 1 : tests at power frequencies.)
NF C26-228-2002 绝缘材料的介电强度.试验方法.第3部分:1,2/50 微秒脉冲试验的补充要求 (Electrical strengh of insulating materials - Test methods - Part 3 : additional requirements for 1,2/50 micro second impulse tests.)
NF C26-230-1970 绝缘材料的试验方法.测定工频、音频和无线电频率用电绝缘材料介电常数和离散因子的推荐方法 (Methods of testing insulating materials. Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating material at power, audio and radio freq.)
NF C26-231-1974 绝缘材料的试验方法.测定高于300MHz 的绝缘材料介电特性的推荐方法 (Methods of testing insulating materials.recommended methods for thedetermination of the dielectric properties of insulating material at frequencies above 300 MHz.)
NF C26-231/AM1-1978 绝缘材料的试验方法.绝缘材料在频率为300MHz以上时的介电特性的推荐测定方法 (METHODS OF TESTING INSULATING MATERIALS. RECOMMENDED METHODS FOR THE DETERMINATION OF THE DIELECTRIC PROPERTIES OF INSULATING MATERIAL AT FREQUENCIES ABOVE 300 MHZ.)
NF C26-231M1-1978 绝缘材料的试验方法.绝缘材料在频率为300MH2以上时的介电特性的推荐测定方法 (METHODS OF TESTING INSULATING MATERIALS. RECOMMENDED METHODS FOR THE DETERMINATION OF THE DIELECTRIC PROPERTIES OF INSULATING MATERIAL AT FREQUENCIES ABOVE 300 MHZ.)
NF C26-235-1-1994 电绝缘材料的液压稳定性的试验方法.第1部分:塑料薄膜 (Method of test for the hydrolic stability of electrical insulating materials. Part 1 : plastic films.)
NF C26-235-2-1998 电气绝缘材料.液压稳定性试验方法.第2部分:模制热固 (Electrical insulating materials. Methods of test for the hydrolytic stability. Part 2 : moulded thermosets.)
NF C26-240-1993 测定由表面放电击穿绝缘材料的相对电阻的推荐性测定方法 (Recommanded test methods for determining the relative resistance of insulating materials to breakdown by surface discharges.)
NF C26-251-1980 绝缘材料的试验方法.电绝缘材料用塑料薄膜和塑料纸摩擦系数的测定方法 (Methods of testing insulating materials. Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation.)
NF C26-260-1974 绝缘材料的试验方法.有绝缘材料时测定电解腐蚀性的试验方法 (Methods of testings insulating materials test methods for determining electrolytic corrosion with insulating materials.)
NF C26-270-1975 绝缘材料的试验方法.新的和老化的电工用纸中等聚合粘度的测定 (Mesurement of the average viscosimetric degree of polymerization ofnew and aged electrical papers.)
NF C26-280-1978 绝缘材料的试验方法.用液体提取法测定绝缘材料中离子杂质的试验方法 (Methods of testing insulating materials. Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids.)
NF C26-287-1998 干燥,固体绝缘材料.云母基绝缘材料.一般规定 (Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges.)
NF C26-290-1-1995 电器绝缘材料.确定电离辐射的影响.第1部分:辐射感应和剂量测定 (Electrical insulating materials. Determination of the effects of ionizing radiation. Part 1 : radiation interaction and dosimetry.)
NF C26-290-2-1993 测定绝缘材料电离辐射效应的指南.第2部分:辐射和试验方法 (Guide for determining the effects of ionizing radiation on insulating materials. Part 2 : procedures for irradiation and test.)
NF C26-290-4-1993 对绝缘材料的离子辐射力的测定指南.第4部分:在辐射环境中设施的分类体系 (Guide for determining the effects of ionizing radiation on insulating materials. Part 4 : classification system for service in radiation environnements.)
NF C26-290-5-2003 电绝缘材料.确定电离辐射的影响.第5部分:在使用过程中的老化评定方法 (Electrical insulation materials - Determinination of the effects of ionising - radiation - Part 5 : procedures for assessment of ageing in service.)
NF C26-301-2002 电绝缘材料.耐热性能.第1部分:老化过程和试验结果评定 (Electrical insulating materials - Properties of thermal endurance - Part 1 : ageing procedures and evaluation of test results.)
NF C26-302-1990 电绝缘材料热稳定性的测定.试验准则选择 (Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria.)
NF C26-303-2002 电绝缘材料.耐热性能.第3部分:耐热性计算说明 (Electrical insulating materials - Thermal endurance properties - Part 3 : instructions for calculating thermal endurance characteristics.)
NF C26-304-1990 电绝缘材料耐热性能测定.老化炉.第1节.单室炉 (Determination of thermal endurance properties of electrical insulating materials. Ageing ovens. Section 1 : single-chamber ovens.)
NF C26-304-2-2001 电绝缘材料.耐热性能.第4-2部分:老化炉.300℃以下使用的精确炉 (Electrical insulating materials - Thermal endurance properties - Part 4-2 : ageing ovens - Precision ovens for use up to 300 oC.)
NF C26-304-3-2000 电绝缘材料.耐热性.第4-3部分:老化烘箱.多室烘箱 (Electrical insulating materials - Thermal endurance properties - Part 4-3 : ageing ovens - Multi-chamber ovens.)
NF C26-305-2003 电绝缘材料.耐热特性.第5部分:绝缘材料相对耐热指数(RTE)的测定 (Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material.)
NF C26-306-1994 电绝缘材料耐热性试验的分析试验方法的应用指南 (Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials.)
NF C26-401-1-1995 陶瓷和玻璃绝缘材料.第1部分:定义和分类 (Ceramic and glass insulating materials. Part 1 : definitions and classifications.)
NF C26-401-2-2000 陶瓷和玻璃绝缘材料.第2部分:试验方法 (Ceramic and glass insulating materials - Part 2 : methods of test.)
NF C26-401-3-1998 陶瓷和玻璃绝缘材料.第3部分:单个材料的规范 (Ceramic and glass-insulating materials. Part 3 : specifications for individual materials.)
NF C27-240-1993 浸渍绝缘材料.关于电气设备制造试验的溶解气体的分析应用(欧洲标准 EN 61 181) (Impregnated insulating materials. Application of dissolved gas analysis (dga) to factory tests on electrical equipment.)
NF C32-027/A2-2002 电缆和光缆用绝缘材料和护套材料.通用试验方法.第1-4部分:一般应用.低温试验 (Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4 : general application - Tests at low temperature.)
NF C32-028/A1-2002 电缆和光缆用绝缘材料和护套材料.通用试验方法.第2-1部分:专用于弹性化合物的方法.耐臭氧性、热固和矿物油 (Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1 : methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tes)
NF E29-033-1994 地下热水管道网络的隔热管道系统.钢制供水管道聚氨基甲酸乙酯热绝缘材料及高密度聚乙烯外壳的连接组件 (Preinsulated bonded pipe systems for underground hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
NF E29-480-1994 地下热水管网的预隔热管道系统.钢制供水管道、聚氨基甲酸乙酯热绝缘材料及高密度聚乙烯外壳的钢阀门组件(欧 (Preinsulated bonded pipe systems for underground hot water networks. Steelvalve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
NF P75-101-1983 建筑物绝缘材料.定义 (THERMAL INSULATION FOR BUILDING PURPOSES. DEFINITION.)
XP P 30-313-1997 屋顶. 固定件.组件抗性的测定.测定绝缘材料或框架密封包覆固定拉力负荷的测试方法 (ROOFING. FASTENERS. DETERMINATION OF THE CHARACTERISTIC RESISTANCE OF THE ASSEMBLY. TEST METHOD TO DETERMINE THE PULL-OUT LOAD OF FIXINGS OUT OF INSULATING MATERIAL OR SEALING COATING FROM THE FRAME.)
编号中文名称英文名称

返回