编号 | 中文名称 | 英文名称 |
ANSI B93.95M-1987
| 液压气动用容积式泵、马达、整体传输.稳态性能的测量
| Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance
|
ANSI C50.41-2000
| 发电站用多相感应电动机
| Polyphase Induction Motors for Power Generating Stations
|
ANSI/AGMA 6019-E-1989
| 使用正齿轮,斜齿轮,人字形齿轮,直伞形齿轮或螺旋伞形齿轮的齿轮电动机
| Gearmotors Using Spur, Helical, Herringbone, Straight Bevel or Spiral Bevel Gears
|
ANSI/AGMA 6034-B-1992
| 封闭的圆柱形涡轮减速器和齿轮电动机的操作规程
| Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors
|
ANSI/AMCA 99-2407-2003
| 皮带或链驱动离心式电风扇的马达位置
| Motor Positions for Belt or Chain Drive Cetrifugal Fans
|
ANSI/API 541-2003
| 250马力及以上的鼠笼式模绕感应电动机
| Form-Wound Squirrel-Cage Induction Motors 250 Horsepower and Larger
|
ANSI/API 547-2004
| 250马力和更大的通用模绕鼠笼式感应电动机
| General Purpose Form-Wound Squirrel Cage Induction Motors-250 Horsepower and Larger
|
ANSI/ASTM D2885-2003
| 使用在线分析仪研究和测试马达法辛烷额定值的试验方法(05.04)
| Research and Motor Method Octane Ratings Using On-Line Analyzers, Test Method for (05.04)
|
ANSI/ASTM F1003-2002
| 电动机救生艇探照灯规范
| Specification for Searchlights on Motor Lifeboats
|
ANSI/ASTM F1134-1997
| 船用电动机和发电机绝缘电阻监测器规范
| Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
|
ANSI/ASTM F1601-2001
| 中央真空吸尘系统家用电动管嘴马达寿命评估试验方法
| Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle for Central Vacuum Cleaning System
|
ANSI/ASTM F2105-2001
| 测定真空除尘器马达/风扇系统空气特性的试验方法
| Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
|
ANSI/ASTM F884-2001
| 中央真空吸尘器马达寿命评估试验方法
| Test Method for Motor Life Evaluation of a Central Vacuum Cleaner
|
ANSI/ASTM F922-2001
| 家用电动喷头电动机寿命评估方法
| Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle
|
ANSI/EIA 463-A-1999
| 交流电动机起动用重型(1型)和轻型(2型)铝电解固定电容器.
| Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum
|
ANSI/EIA-463-B-2003
| 重型(1型)和轻型(2型)交流电动机起动用固定铝电解电容器
| Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum
|
ANSI/IEEE 1095-1989
| 水电用立式发动机和发动机/电动机安装指南
| Guide for Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications
|
ANSI/IEEE 11-2000
| 铁路和道路车辆用旋转电动机械
| Rail and Road Vehicles, Rotating Electric Machinery for
|
ANSI/IEEE 114-2001
| 单相感应电动机的标准试验程序
| Standard Test Procedure for Single-Phase Induction Motors
|
ANSI/IEEE 1255-2000
| 同步电动机起动过程中扭距脉动的评价指南
| Guide for Evaluation of Torque Pulsations During Starting of Synchronous Motors
|
ANSI/IEEE 1349-2001
| I级2区危险场所(分类的)使用电动机指南
| Guide for Application of Electric Motors in Class I Division 2 Hazardous (Classified) Locations
|
ANSI/IEEE 252-1995
| 磁隙有液多相感应电动机的试验程序
| Motors Having Liquid in the Magnetic Gap, Test Procedure for Polyphase Induction
|
ANSI/IEEE 286-2000
| 电动机械定子线圈绝缘的损失角增量测量的推荐实施规程
| Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
|
ANSI/IEEE 334-1999
| 核电站1E级电动机连续负载质量鉴定
| Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
|
ANSI/IEEE 649-1992
| 核电站用合格的1E级电动机控制台
| Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
|
ANSI/IEEE 841-2001
| 化学工业.功率达500hp及以下的全封闭扇冷却式重载(TEFC)鼠笼式感应电动机
| Chemical Industry - Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors - Up to and Including 500 hp
|
ANSI/IEEE C37.96-2000
| 交流电动机保护指南
| Guide for AC Motor Protection
|
ANSI/IEEE C50.12-2005
| 5MVA及以上水轮机设备用50和60赫兹凸极其同步发电机和发电机/电动机标准
| Standard for Salient-Pole 50 and 60 Hz Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications Rated 5 MVA and Above
|
ANSI/NECA 402-2001
| 安装马达控制台的推荐操作规程
| Recommended Practice for Installing Motor Control Centers
|
ANSI/NEMA MG1, Revision 1-2003
| 电动机和发电机
| Motors and Generators
|
ANSI/SAE J1375-1997
| 起动马达的应用考虑
| Cranking Motor Application Considerations
|
ANSI/SAE J1634-1993
| 电动机车的油耗和行车里程的试验程序
| Electric Vehicle Consumption and Range Test Procedure
|
ANSI/SAE J1666-1993
| 电动机车加速、爬坡能力、减速的试验程序
| Electric Vehicle Acceleration, Gradeability, and Deceleration Test Procedure
|
ANSI/UL 2111-2002
| 电动机过热保护的安全标准
| Standard for Safety for Overheating Protection for Motors
|
ANSI/UL 674-2003
| I类C、D组和Ⅱ类E、F、G组危险场所用电动机和发电机
| Electric Motors and Generators for Use in Hazardous Locations, Class I Groups C and D, Class II Groups E, F and G
|
ANSI/UL 845-2005
| 电动机控制台标准(公告日期2004年8月19日)
| Standard for Motor Control Centers (bulletin dated August 19, 2004)
|
ASTM D 6758-2002
| 用电动机械法测量土壤和土壤集料实体的硬挺度和表观模数的标准试验方法
| Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method
|
ASTM F 1134-1994
| 船用电动机和发电机绝缘电阻监测器
| Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
|
ASTM F 2106-2003
| 装有电动机的人力蹋车设计和性能特征评定的标准试验方法
| Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
|
ASTM F 2361-2003
| 船上服务用低压(1000VAC或以下)交流电动机订购的标准指南.最高至500马力的发动机
| Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service - Up to and Including Motors of 500 Horsepower
|
ASTM F 555-2001
| 家用真空吸尘器的电动机寿命评定的标准试验方法
| Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
|
ASTM F 884-2001
| 安装在内部的(集中式)真空吸尘器的电动机寿命评定的标准试验方法
| Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
|
ASTM F 922-2001
| 家用电动喷头的电动机寿命评估的标准试验方法
| Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
|
IEEE 1068-1996
| 石油化学工业用电动机的修理和重绕推荐规范
| (Recommended practice for the repair and rewinding of motors for the petroleum and chemical industry)
|
IEEE 1095-1989
| 水电用立式发电机和发电机/电动机安装指南
| (Guide for installation of vertical generators and generator/motors for hydroelectric applications)
|
IEEE 1107-1996
| 交流电动机使用固定片散绕线圈用密封隔热系统的评定
| (Thermal evaluation of sealed insulation systems for AC electric machinery employing random-wound stator coils)
|
IEEE 112-1996
| 多相感应电动机及发电机的试验规程
| (Test procedure for polyphase induction motors and generators)
|
IEEE 114-2001
| 单相感应电动机的试验规程
| (Test procedure for single-phase induction motors)
|
IEEE 1255-2000
| 同步电动机起动过程中扭矩脉动的评定
| (Evaluation of torque pulsations during starting of synchronous motors)
|
IEEE 252-1995
| 磁隙中有液体的多相感应电动机的试验方法
| (Test procedure for polyphase induction motors having liquid in the magnetic gap)
|
IEEE 303-1991
| 第1类中A、B、C、D组第2分部所列电动机辅助装置用推荐规程
| (Recommended practice for auxiliary devices for motors in class 1, groups A, B, C, and D, division 2 locations)
|
IEEE 841-2001
| 石油和化学工业.最高达370kW(500hp)的全封闭风扇冷却式重载鼠笼式感应电动机
| (Petroleum and chemical industry - Severe duty Totally Enclosed Fan-Cooled (TEFC) - Squirrel cage induction motors, up to and including 370 kW (500 hp))
|
IEEE 95-2002
| 带直流高压的交流电动机械(2300V及以上)的绝缘试验操作规程
| (Practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage)
|
IEEE C 37.96-2000
| 交流电动机保护指南
| (Guide for AC motor protection)
|
UL 1004-1994
| 电动机
| (Electric motors )
|
UL 1004A-2001
| 消防泵电动机
| (Fire pump motors )
|
UL 1112-1997
| 船用电动机和发电机(启动、外驱动倾角、配平片、发电机、交流发电机)
| (Marine electric motors and generators (cranking, outdrive tilt, trim tab, generators, alternators) )
|
UL 1182-1977
| 船舶外装电动推进装置(旋转电动机)
| (Marine electric outboard propulsion units (trolling motors) )
|
UL 2111-1997
| 电动机用过热保护装置
| (Overheating protection for motors )
|
UL 60730-2-10A-2002
| 家用和类似用途的自动电气控制装置.第2部分:电控电动机启动继电器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated motor starting relays )
|
UL 60730-2-4-2003
| 家用和类似用途的电自动控制器.第2部分:密封和半密封式电动压缩机的电动机热保护装置的特殊要求
| (Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type )
|
UL 674-2003
| 1类危险场所用电动机和发电机
| (Electric motors and generators for use in division 1 hazardous (classified) locations )
|
UL 73-1993
| 电动机驱动装置
| (Motor-operated appliances )
|
UL 845-1995
| 电动机控制中心
| (Motor control centers )
|
UL 982-1995
| 家用电动机操作食品加工机械
| (Motor-operated household food preparing machines )
|
UL 984-1996
| 密封制冷电动机-压缩机
| (Hermetic refrigerant motor-compressors )
|
编号 | 中文名称 | 英文名称 |