| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 14424-2005
| 消防设备.带电动机的防爆可携式传送泵.要求、类型和验收试验
| Firefighting equipment - Explosion-proof portable transfer pump with electric motor - Requirements, type and acceptance test
|
| DIN 14425-2004
| 防火.带电动机的可携式潜水泵
| Fire fighting purposes - Portable submersible pumps with electrical motor
|
| DIN 14427-2005
| 消防设备.带电动机的防爆便携式危险液体用传送泵.要求、检验
| Firefighting equipment - Explosion-proof portable transfer pump for dangerous fluids, with electric motor - Requirements, testing
|
| DIN 1495-1-1983
| 小功率电动机和功率小于37瓦的电动机用有满足特殊要求的烧结金属制滑动轴承.球面轴承.尺寸
| Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Spherical bearings; Dimensions
|
| DIN 1495-2-1983
| 小功率电动机和功率小于37瓦的电动机用有满足特殊要求的烧结金属制滑动轴承.圆柱轴承.尺寸
| Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Cylindrical bearings; Dimensions
|
| DIN 21625-1990
| 矿山辅助通风设备.电动机驱动的风扇
| Auxiliary ventilation in coalmines; fans with electric motor drive
|
| DIN 24331-1972
| 液压流体力学.液压泵和液压马达、几何排量-容量、流量
| Oilhydraulic; hydraulic pumps and hydraulic engines, geometrical displacement-volume, rates
|
| DIN 25620-5-1969
| 铁路车辆零件术语.车身结构、电动机车车身框架
| Terms for railway vehicle parts; body structure; body framework for electric locomotives
|
| DIN 25621-5-1979
| 铁路车辆零件术语.第5部分:机车衬套和内部装修、电动机车衬套
| Terms for railway vehicle parts; body lining and interior fittings, body lining for electric locomotives
|
| DIN 332-2-1983
| 旋转电动机械用轴端带螺纹的60度中心孔
| Center holes 60° with thread for shaft ends for rotating electrical machines
|
| DIN 4000-39-1983
| 旋转电动机械的产品特性图表
| Tabular layouts of article characteristics for rotating electrical machines
|
| DIN 40030-1993
| 通过受控的静态电力转换器从交流供电系统直接向直流电动机输送的额定电压
| Rated voltages of DC-motors directly fed by controlled static power convertors from AC-power systems
|
| DIN 42013-1988
| 小型电动机的球轴承轴向调节用弹簧垫圈
| Spring washers for axial adjustment of ball bearings of small motors
|
| DIN 42017-1984
| 小型电动机线路接头的配置和标记
| Marking and coordination of the connecting leads for small motors
|
| DIN 42020-1982
| 带公差环的小型电动机的轴端
| Shaft ends with tolerance ring for small motors
|
| DIN 42027-1984
| 伺服电动机.分类、概述
| Servo motors; classification, survey
|
| DIN 42028-1-1980
| 小型电动机用带插座和连接片的连接器.型式和尺寸
| Connectors with receptacles and tabs for small motors; forms and dimensions
|
| DIN 42672-2-1974
| B3型设计带滚珠轴承的内冷鼠笼式交流电多相电动机.第2部分:最大的外壳尺寸
| Alternating-current polyphase motors with ventilated enclosures and squirrel-cage, design B3, with ball bearings; maximum envelope dimensions
|
| DIN 42673-4-1974
| B3型设计带滚珠轴承的风冷鼠笼式交流电多相电动机.第4部分:最大的外壳尺寸
| Totally-enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B3, with ball bearings, maximum envelope dimensions
|
| DIN 42676-2-1974
| B5型设计带滚珠轴承的内冷鼠笼式交流电多相电动机.第2部分:最大的外壳尺寸
| Alternating-current polyphase motors with ventilated enclosures and squirrel-cage, design B5, with ball bearings; maximum envelope dimensions
|
| DIN 42677-4-1974
| B5型、B10型、B14型设计带滚珠轴承的风冷鼠笼式交流电多相电动机.第4部分:B5型、B14型设计的最大外壳尺寸
| Totally enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B5, B10, B14, with ball bearings; maximum envelope dimensions for design B5, B14
|
| DIN 42692-1980
| 工业缝纫机.带离合器的电动机用带槽皮带轮.尺寸
| Industrial sewing machines; grooved pulleys for motors with clutch, dimensions
|
| DIN 42703-1983
| 工业缝纫机.带离合器的电动机的皮带护档.主要尺寸
| Industrial sewing machines; belt guards for motors fitted with a clutch; main dimensions
|
| DIN 42706-1983
| 工业缝纫机.有定位装置的带离合器电动机.主要尺寸
| Industrial sewing machines; clutch motor with position device; main dimensions
|
| DIN 42925-2004
| 额定电压为400 V至690 V的三相笼型感应电动机用接线箱的电缆引入线
| Terminal box cable entries for three-phase cage induction motors at rated voltages from 400 V to 690 V
|
| DIN 42955-1981
| 旋转电动机械安装法兰和轴外伸部径向跳动公差、试验
| Tolerances of shaft extension run-out and of mounting flanges for rotating electrical machinery, test
|
| DIN 42961-1980
| 旋转电动机械功率铭牌.结构
| Rating plates for rotating electrical machinery; design
|
| DIN 42962-1-1978
| 额定电压6KV的旋转电动机械端子的排列
| Arrangement of terminals for rotating electrical machinery, rated voltage 6 kV
|
| DIN 42962-2-1980
| 额定电压10KV旋转电动机械用端子的排列
| Arrangement of terminals for rotating electrical machinery, rated voltage 10 kV
|
| DIN 43043-1-1976
| 电动机用双钳位刷握器.第1部分:主要尺寸
| Double clamping brush-holders for electrical machinery; principal dimensions
|
| DIN 43043-2-1971
| 电动机械用带3个螺栓双夹紧刷握.主要尺寸
| Double clamping brush-holder with 3 bolts for electrical machinery; main dimensions
|
| DIN 43101-6-1981
| 电力牵引机车.牵引电动机零件术语
| Rolling stock for electric traction; terms for parts of traction motors
|
| DIN 43200-2002
| 电动机用滚柱轴承.维护.安装.润滑.拆卸.清洗和再使用
| Roller bearings for electrical machines of electric vehicles - Preservation, mounting, lubrications, dismounting, cleaning and reutilization
|
| DIN 45635-57-1986
| 机器排放的噪声测量.空气传播的噪声.第57部分:包洛面法.外侧马达
| Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; outboard motors
|
| DIN 46062-1970
| 直流电动机和交流滑环感应电动机的起动器
| Starter for d.c.-motors and a.c.-slip-ring induction motors
|
| DIN 46406-1-1972
| 电动机械用绑线.磁性钢丝.拉制镀锡钢丝
| Binding Wires for Electrical Machines; Magnetic Steel Wire, Drawn and Tinned
|
| DIN 46406-2-1972
| 电动机械用绑线.非磁化的拉制镀锡钢丝
| Binding Wires for Electrical Machines; Non-magnetic Steel Wire, Drawn and Tinned
|
| DIN 72782-1-1967
| 风挡雨刮子.第1部分:雨刮子电动机.正齿轮传动的电动机
| Windshield wipers; wiper motors, rotors with spur-gear drive
|
| DIN 72782-3-1967
| 风挡雨刮子.第3部分:雨刮子电动机.蜗轮装置传动的电动机
| Windshield wipers; wiper motors, rotors with worm-gear drive
|
| DIN 8979-1973
| 电动机式制冷压缩机的高温试验
| High temperature test for refrigeration motor compressors
|
| DIN CLC/TS 60034-25-2006
| 旋转电机.第25部分:专为变流电源设计的笼型感应电动机的设计和性能指南
| Rotating electrical machines - Part 25: Guide for the design and performance of cage induction motors specifically designed for converter supply (IEC/TS 60034-25:2004); German version CLC/TS 60034-25:2005
|
| DIN EN 137000-1998
| 总规范.配合电动机使用的非固态电解质的固定铝电解交流电容器
| Generic specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors; German version EN 137000:1997
|
| DIN EN 137100-1998
| 分规范.电动机起动器用的非固态电解质的固定铝电解交流电容器.资格认证
| Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 13710:1997
|
| DIN EN 137101-1998
| 空白详细规范.电动机起动器用的非固态电解质的固定铝电解交流电容器.资格认证
| Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 137101:1995
|
| DIN EN 1646-2-1998
| 休闲旅游活动食宿车.电动机的活动拖挂车.第2部分:用户有效负载
| Leisure accommodation vehicles - Motor caravans - Part 2: User payload; German version EN 1646-2:1998
|
| DIN EN 29775-1993
| 游艇.功率为15KW至40KW单个舷外电动机的遥控系统
| Small craft; remote steering systems for single outboard motors of 15 kW to 40 kW (ISO 9975:1990); German version EN 29975:1993
|
| DIN EN 45510-2-5-2003
| 发电厂设备购置指南.第2-5部分:电气设备.马达
| Guide for procurement of power station equipment - Part 2-5: Electrical equipment; Motors; German version EN 45510-2-5:2002
|
| DIN EN 50347-2003
| 有标准尺寸和输出的通用三相感应电动机.框数56-315,法兰数65-740
| General purpose three-phase induction motors having standard dimensions and outputs - Frame numbers 56 to 315 and flange numbers 65 to 740; German version EN 50347:2001
|
| DIN EN 60252-1-2002
| 交流电动机的电容器.第1部分:总则.性能、试验和额定值.安全要求.安装和操作指南
| AC motor capacitors - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation (IEC 60252-1:2001); German version EN 60252-1:2001
|
| DIN EN 60252-2-2004
| 交流电动机电容器.第2部分:电动机起动电容器
| AC motor capacitors - Part 2: Motor start capacitors (IEC 60252-2:2003); German version EN 60252-2:2003
|
| DIN EN 60349-2-2002
| 铁路设施.铁路和公路车辆用旋转电机.第2部分:电子变流器馈电交流电动机
| Railway applications - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors (IEC 60349-2:1993, modified); German version EN 60349-2:2001
|
| DIN EN 60644-1997
| 电动机电路高压熔断器规范
| Specification for high-voltage fuse-links for motor circuit applications (IEC 60644:1979); German version EN 60644:1993
|
| DIN EN 60730-2-10-2003
| 家用和类似用途的电气自动控制器.第2-10部分:电动机起动继电器的特殊要求
| Automatic electrical controls for househould and similar use - Part 2-10: Particular requirements for motor starting relays (IEC 60730-2-10:1991, modified + A1:1994 + A2:2001, modified); German version EN 60730-2-10:1995 + A1:1996 + A2:2002
|
| DIN EN 60947-4-1-2006
| 低压开关设备和控制设备.第4-1部分:接触器和电动机启动器.机电接触器和电动机启动器
| Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2000 + Corrigendum:2001 + A1:2002 + A2:2005); German version EN 60947-4-1:2001 + A1:2002 + A2:2005
|
| DIN EN 60947-4-2-2002
| 低压开关设备和控制设备.第4-2部分:接触器和电动机起动器.交流半导体电动机控制器和电动机起动器 (IEC 6094
| Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters; AC semiconductor motor controllers and starters (IEC 60947-4-2:1999 + A1:2001); German version EN 60947-4-2:2000 + A1:2002
|
| DIN EN 60947-4-3-2000
| 低压开关和控制设备.第4-3部分:接触器和电机起动器.交流半导体控制器和非电动机负载用接触器
| Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters; ac semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999); German version EN 60947-4-3:2000
|
| DIN EN 61029-2-1-2002
| 移动电动机具安全性.第2-1部分:圆盘锯工作台特殊要求
| Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993 + A1:1999 + A2:2001, modified); German version EN 61029-2-1:2002
|
| DIN EN 61029-2-5-2003
| 移动电动机具安全性.第2-5部分:带锯特殊要求
| Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993 + A1:2001, modified); German version EN 61029-2-5:2002
|
| DIN EN 61377-1997
| 铁路.车辆.反向供电交流电动机及其控制的联合检验
| Railway applications - Rolling stock - Combined testing of inverter-fed alternating current motors and their control (IEC 61377:1996); German version EN 61377:1996 + Corrigendum:1996
|
| DIN EN 61377-2-2003
| 铁路设施.机车车辆.联合试验.第2部分:反向直流牵引电动机及其控制设备
| Railway applications - Rolling stock; Combined testing - Part 2: Chopper-fed direct current traction motors and their control (IEC 61377-2:2002); German version EN 61377-2:2002
|
| DIN EN 61377-3-2003
| 铁路设施.铁路车辆.第3部分:间接变流器供电的交流电动机及其控制系统的组合测试
| Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control systems (IEC 61377-3:2002); German version EN 61377-3:2002
|
| DIN EN ISO 11498-1999
| 牙科手持器械.牙科用低压电动机
| Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997); German version EN ISO 11498:1999
|
| DIN EN ISO 5163-2006
| 石油产品.发动机和航空燃料的爆震特性测定.马达法
| Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2005); German version EN ISO 5163:2005
|
| DIN EN ISO 6721-2-1996
| 塑料.电动机械性能测定.第2部分:扭摆法
| Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 6721-2:1996
|
| DIN EN ISO 6721-3-1996
| 塑料.电动机械性能测定.第3部分:弯曲振动.共振法
| Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration; resonance-curve (ISO 6721-3:1994, including Technical Corrigendum 1:1995); German version EN ISO 6721-3:1996
|
| DIN IEC/TS 60034-17-2004
| 旋转电机.第17部分:变频供电的鼠笼式感应电动机.应用指南
| Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide (IEC/TS 60034-17:2002 + Corrigendum:2003)
|
| DIN ISO 3019-1-2004
| 液压传动.容积泵和马达的安装法兰和轴伸的尺寸及标注代号.第1部分:用米制单位表示的英制系列
| Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001)
|
| DIN ISO 3019-2-2004
| 液压传动.容积式泵和马达的安装法兰和轴伸的尺寸及标注代号.第2部分:米制系列
| Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001)
|
| DIN ISO 4391-1984
| 液压传动.泵、电动机和整体式传动装置.参数定义和字母符号
| Hydraulic fluid power; pumps, motors and integral transmissions; parameter definitions and letter symbols
|
| DIN ISO 4409-1994
| 液压里动力.正排量泵、电动机和整体传动装置.静态稳定性的测定
| Hydraulic fluid power; positive displacement pumps, motors and integral transmissions; determination of steady-state performance; identical with ISO 4409:1986
|
| DIN ISO 8426-1994
| 液压流体动力.正排量泵和电动机.推导容积的测定
| Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity; identical with ISO 8426:1988
|
| DIN ISO 8856-1997
| 道路车辆.起动电动机电气性能.试验方法和一般要求
| Road vehicles - Electrical performance of starter motors - Test methods and general requirements (ISO 8856:1995)
|
| DIN ISO 9457-1-1997
| 道路车辆.米制起动器电动机小齿轮.第1部分:普通小齿轮
| Road vehicles - Metric starter motor pinions - Part 1: Currently used pinions (ISO 9457-1:1991)
|
| DIN ISO 9457-2-1997
| 道路车辆.米制起动器电动机小齿轮.第2部分:20度压力角小齿轮
| Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle (ISO 9457-2:1994)
|
| DIN ISO 9458-1989
| 公路车辆.起动电动机的电气连接件:等同采用 ISO 9458:1988
| Road vehicles; starter motor electrical connections; identical with ISO 9458:1988
|
| DIN-Fachbericht 72-1998
| 汽车附加传动装置用电动机噪声质量的录入与文献加工
| ()
|
| 编号 | 中文名称 | 英文名称 |
|---|