| 编号 | 中文名称 | 英文名称 |
|---|
| BS 3156-11.0.2-1998
| 燃气分析.第11部分:天然气.第0节:通则.第2小节:天然气质量命名符号
| Analysis of fuel gases - Methods for non-manufactured gases - General - Quality designation for natural gas
|
| BS 3156-11.1.2-1997
| 燃气分析.第11部分:天然气.第1节:碳氢化合物和惰性气体分析.第2小节:气体色谱法展开分析
| Analysis of fuel gases - Methods for non-manufactured gases - Hydrocarbons and inert gases - Extended analysis by gas chromatographic method
|
| BS 3156-11.2.3-1986
| 燃气的分析.第11部分:天然气.第2节:潜在液体烃含量测定.第3小节:容积法
| Analysis of fuel gases - Methods for non-manufactured gases - Determination of potential hydrocarbon liquid content - Volumetric method
|
| BS 3156-11.6-1997
| 燃气分析.第11部分:天然气.第6节:含水量高压测定法
| Analysis of fuel gases - Methods for non-manufactured gases - Determination of water content at high pressure
|
| BS 4089-1999
| 液化石油气和液化天然气用金属软管组件规范
| Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
|
| BS 7576-1992
| 液化天然气的输送管道连续取样方法
| Method for continuous sampling of liquefied natural gas (LNG) in transfer pipelines
|
| BS DD ISO/TS 24817-2007
| 石油、石化和天然气工业.管道综合修理.资格认定、设计、安装、试验和验收
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection
|
| BS EN 1160-1997
| 液化天然气用设施和装置.液化天然气的一般特性
| Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas
|
| BS EN 12065-1998
| 液化天然气设备和安装.扑灭液化天然气火焰用生产中高膨胀泡沫和灭火粉末用泡末浓缩物的试验
| Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires
|
| BS EN 12066-1998
| 液化天然气装置和设备.液化天然气蓄水池内用绝缘衬里的试验
| Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas
|
| BS EN 12308-1998
| 液化天然气设施和设备.用于液化天然气管道的法兰接头垫圈设计适配性试验
| Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
|
| BS EN 12567-2000
| 工业阀门.液化天然气用隔离阀.适用性验证试验规范
| Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
|
| BS EN 12838-2000
| 液化天然气设施和设备.稳定性试验和液化天然气取样系统
| Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems
|
| BS EN 13423-2000
| 压缩天然气车辆的使用
| Compressed natural gas vehicle operations
|
| BS EN 13645-2002
| 液化天然气用设备.存储容量5t至200t之间的港口设备的设计
| Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t
|
| BS EN 13766-2003
| 液化石油气和液化天然气输送用热塑性多层非硫化软管和软管组件.规范
| Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
|
| BS EN 13942-2003
| 石油和天然气工业.管道输送.管道阀
| Petroleum and natural gas industries - Pipeline transportation - Pipeline valves
|
| BS EN 14141-2003
| 天然气输送用管道阀.性能要求和试验
| Valves for natural gas transportation in pipelines - Performance requirements and tests
|
| BS EN 14161-2003
| 石油和天然气工业.管道输送系统
| Petroleum and natural gas industries - Pipeline transportation systems
|
| BS EN 14163-2001
| 石油和天然气工业.管道运输系统.管道焊接
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines
|
| BS EN 1442-2006
| 液化石油天然气(LPG)设备和附件.液化石油天然气用可运输的并可再填充的焊接钢瓶.设计和构造
| LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
|
| BS EN 1473-2007
| 液化天然气装置和设备.岸上装置的设计
| Installation and equipment for liquefied natural gas - Design of onshore installations
|
| BS EN 1474-1997
| 液化天然气装置和设备.装卸臂的设计和试验
| Installation and equipment for liquefied natural gas - Design and testing of loading/unloading arms
|
| BS EN 14870-1-2004
| 石油和天然气工业.管道运输系统的感应管弯头、配件和法兰.感应管弯头
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Induction bends
|
| BS EN 14870-2-2004
| 石油和天然气工业.管道运输系统的吸入管弯头、配件和法兰.配件
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings
|
| BS EN 14870-3-2006
| 石油和天然气工业.管道运输系统的吸入管弯头、配件和法兰.法兰
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
|
| BS EN 1532-1997
| 液化天然气设施和设备.船舶与海岸之间的交接
| Installation and equipment for liquefied natural gas - Ship to shore interface
|
| BS EN 1762-2004
| 25巴(2,5MPA)以下液化石油气(LPG)(液相或气相)以及天然气用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
|
| BS EN 1776-1999
| 燃气供应.天然气测量站.功能要求
| Gas supply - Natural gas measuring stations - Functional requirements
|
| BS EN ISO 10101-1-1994
| 天然气.卡尔费舍尔法测定水含量.介绍
| Natural gas - Determination of water by the Karl Fischer method - Introduction
|
| BS EN ISO 10101-2-1994
| 天然气.卡尔费舍尔法测定水含量.滴定法
| Natural gas - Determination of water by the Karl Fischer method - Titration procedure
|
| BS EN ISO 10101-3-1994
| 天然气.卡尔费舍尔法测定水含量.库仑滴定法
| Natural gas - Determination of water by the Karl Fischer method - Coulometric procedure
|
| BS EN ISO 10417-2004
| 石油和天然气工业.井下安全阀系统.设计、安装、操作和矫正
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
|
| BS EN ISO 10418-2003
| 石油和天然气工业.近海生产装置.基础表面操作安全系统
| Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems
|
| BS EN ISO 10423-2004
| 石油和天然气工业.钻井和开采设备.井口设施和采油树设备(CD-ROM)
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (CD-ROM)
|
| BS EN ISO 10424-1-2004
| 石油和天然气工业.旋转钻探设备.旋转钻杆构件
| Petroleum and natural gas industries - Rotary drilling equipment - Rotary drill stem elements
|
| BS EN ISO 10426-1-2006
| 石油和天然气工业.固井用水泥和材料.规范
| Petroleum and natural gas industries - Cements and materials for well cementing - Specification
|
| BS EN ISO 10426-2-2004
| 石油和天然气工业.油井固井用水泥和材料.油井用水泥的试验
| Petroleum and natural gas industries - Cements and materials for well cementing - Testing of well cements
|
| BS EN ISO 10426-3-2003
| 石油和天然气工业.固井用水泥和材料.深水井水泥配方的试验
| Petroleum and natural gas industries - Cements and materials for well cementing - Testing of deepwater well cement formulations
|
| BS EN ISO 10426-4-2005
| 石油和天然气工业.油井固井用水泥和材料.在大气压力下泡沫水泥浆的制备和试验
| Petroleum and natural gas industries - Cements and materials for well cementing - Preparation and testing of foamed cement slurries at atmospheric pressure
|
| BS EN ISO 10426-5-2006
| 石油和天然气工业.油井固井用水泥和材料.在大压力下固井水泥加工制剂的收缩和膨胀的测定
| Petroleum and natural gas industries - Cements and materials for well cementing - Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
|
| BS EN ISO 10427-1-2002
| 石油和天然气工业.套管扶正器.弓形弹簧套管扶正器
| Petroleum and natural gas industries - Casing centralizers - Bow-spring casing centralizers
|
| BS EN ISO 10427-2-2004
| 石油和天然气工业.良好胶结设备.扶正器的放置和限动环的检测
| Petroleum and natural gas industries - Equipment for well cementing - Centralizer placement and stop-collar testing
|
| BS EN ISO 10427-3-2004
| 石油和天然气工业.固井用设备.浮动式固井设备的性能试验
| Petroleum and natural gas industries - Equipment for well cementing - Performance testing of cementing float equipment
|
| BS EN ISO 10432-2005
| 石油和天然气工业.下降孔设备.地下安全阀设备
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
|
| BS EN ISO 10437-2003
| 石油、石油化学和天然气工业.专用汽轮机设备
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications
|
| BS EN ISO 10438-1-2003
| 石油、石化和天然气工业.润滑、油封、控油系统和辅助装置.一般要求
| Petroleum, petrochemical and natural gas industries - Lubrication , shaft-sealing and control-oil systems and auxiliaries - General requirements
|
| BS EN ISO 10438-2-2003
| 石油和天然气工业.润滑、油封、控油系统和辅助装置.专用油系统
| Petroleum and natural gas industries - Lubrication, shaft sealing and control oil systems and auxiliaries - Special purpose oil systems
|
| BS EN ISO 10438-3-2003
| 石油、石化和天然气工业.润滑、油封、控油系统和辅助装置.通用油系统
| Petroleum, petrochemical and natural gas industries - Lubrication , shaft sealing and control oil systems and auxilliaries - General-purpose oil systems
|
| BS EN ISO 10438-4-2004
| 石油、石化和天然气工业.润滑、油封、控油系统和辅助装置.自动气封支撑系统
| Petroleum, petrochemical and natural gas industries - Lubrication , shaft-sealing and control-oil systems and auxiliaries - Self-acting gas seal support systems
|
| BS EN ISO 10440-1-2001
| 石油和天然气工业.旋转型容积式压缩机.加工压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Process compressors (oil-free)
|
| BS EN ISO 10440-2-2002
| 石油和天然气工业.旋转型容积式压缩机.封装的空气压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Packaged air compressors (oil-free)
|
| BS EN ISO 10441-2007
| 石油、石化和天然气工业.机械动力传输用挠性联轴器.专用设施
| Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-purpose applications
|
| BS EN ISO 10715-2001
| 天然气.取样指南
| Natural gas - Sampling guidelines
|
| BS EN ISO 10723-1996
| 天然气.在线分析系统的性能评定
| Natural gas - Performance evaluation for on-line analytical systems
|
| BS EN ISO 11439-2000
| 气瓶.车上贮存机动车用天然气燃料用高压气瓶
| Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
|
| BS EN ISO 11541-1997
| 天然气.高压下含水量的测定
| Natural gas - Determination of water content at high pressure
|
| BS EN ISO 11960-2005
| 石油和天然气工业.油井套管或油管用钢管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
|
| BS EN ISO 11961-1997
| 石油和天然气工业.钻探管用钢管.规范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
|
| BS EN ISO 12213-1-1998
| 天然气.压缩因子的计算.导言和指导方针
| Natural gas - Calculation of compression factors - Introduction and guidelines
|
| BS EN ISO 12213-2-1998
| 天然气.压缩因子的计算.质量合成分析计算
| Natural gas - Calculation of compression factors - Calculation using a molar-composition analysis
|
| BS EN ISO 12213-3-1998
| 天然气.压缩因子的计算.物理特性计算
| Natural gas - Calculation of compression factor - Calculation using physical properties
|
| BS EN ISO 13443-1997
| 天然气.标准参比条件
| Natural gas - Standard reference conditions
|
| BS EN ISO 13500-2006
| 石油和天然气工业.钻井液体材料.规范和试验
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests
|
| BS EN ISO 13501-2006
| 石油和天然气工业.钻井液.加工系统评估
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation
|
| BS EN ISO 13503-1-2003
| 石油和天然气工业.完井液和材料.完井液粘性测量
| Petroleum and natural gas industries - Completion fluids and materials - Measurement of viscous properties of completion fluids
|
| BS EN ISO 13503-2-2006
| 石油和天然气工业.完井液和材料.水力压裂和砾石填充作业用支撑剂性能测定
| Petroleum and natural gas industries - Completion fluids and materials - Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
|
| BS EN ISO 13503-3-2006
| 石油和天然气工业.完井液和材料.重盐水试验
| Petroleum and natural gas industries - Completion fluids and materials - Testing of heavy brines
|
| BS EN ISO 13503-4-2006
| 石油和天然气工业.完井液和材料.在静态条件下测量增产液和砾石填充液渗漏的程序
| Petroleum and natural gas industries - Completion fluids and materials - Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
|
| BS EN ISO 13503-5-2006
| 石油和天然气工业.完井液和材料.测量重盐水长期电导率方法
| Petroleum and natural gas industries - Completion fluids and materials - Procedures for measuring the long term conductivity of proppants
|
| BS EN ISO 13533-2002
| 石油和天然气工业.钻探和生产设备.钻孔设备
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment
|
| BS EN ISO 13534-2001
| 石油和天然气工业.钻＃和生产设备.提升设备的检查、维护、修理和再制造
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and re-manufacture of hoisting equipment
|
| BS EN ISO 13535-2001
| 石油和天然气工业.钻井和生产设备.提升设备
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment - Hoisting equipment
|
| BS EN ISO 13625-2003
| 石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings
|
| BS EN ISO 13626-2004
| 石油和天然气工业.钻井和生产设备.钻井和油井辅助装置
| Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures
|
| BS EN ISO 13628-1-2005
| 石油和天然气工业.水下采油系统的设计和操作.一般要求和建议
| Petroleum and natural gas industries - Design and operation of subsea production systems - General requirements and recommendations
|
| BS EN ISO 13628-10-2006
| 石油和天然气工业.水下采油系统的设计和操作.连接柔性管规范
| Petroleum and natural gas industries - Design and operation of subseaprod uction systems - Specification for bonded flexible pipe
|
| BS EN ISO 13628-2-2006
| 石油和天然气工业.海底采油系统的设计和操作.海底和海洋设备用未结合软管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Unbonded flexible pipe systems for subsea and marine applications
|
| BS EN ISO 13628-3-2001
| 石油和天然气工业.水下生产系统的设计和操作.贯通流线系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Through flowline (TFL) systems
|
| BS EN ISO 13628-4-1999
| 石油和天然气工业.水下采油系统的设计和操作.井口和采油树设备
| Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea wellhead and tree equipment
|
| BS EN ISO 13628-6-2006
| 石油和天然气工业.水下采油系统的设计和操作.水下生产控制系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea production control systems
|
| BS EN ISO 13628-7-2005
| 石油和天然气工业.水下采油系统的设计和操作.完井/修井提升系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Completion/workover riser systems
|
| BS EN ISO 13628-8-2002
| 石油和天然气工业.水下采油系统设计和操作.水下采油系统的遥控潜水器(ROV)接口
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems
|
| BS EN ISO 13628-9-2001
| 石油和天然气工业.水下采油系统设计和操作.遥控设备(ROT)干涉系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated tool (ROT) intervention systems
|
| BS EN ISO 13631-2002
| 石油和天然气工业.组合的往复式气体压缩机
| Petroleum and natural gas industries - Packaged reciprocating gas compressors
|
| BS EN ISO 13679-2003
| 石油和天然气工业.套管和管连接的测试程序
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections
|
| BS EN ISO 13680-2002
| 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
|
| BS EN ISO 13686-1998
| 天然气.质量指标
| Natural gas - Quality designation
|
| BS EN ISO 13691-2002
| 石油和天然气工业.专用高速齿轮组件
| Petroleum and natural gas industries - High-speed special-purpose gear units
|
| BS EN ISO 13702-1999
| 石油和天然气工业.海上生产设备着火和爆炸的控制和减弱.要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
|
| BS EN ISO 13703-2001
| 石油和天然气工业.近海生产平台管道系统设计和安装
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms
|
| BS EN ISO 13705-2006
| 石油、石化和天然气工业.一般精炼厂用火加热器
| Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service
|
| BS EN ISO 13706-2006
| 石油、石油化工和天然气工业.风冷式热交换器
| Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
|
| BS EN ISO 13709-2003
| 石油、石化和天然气工业用离心泵
| Centrifugal pumps for petroleum, petrochemical and natural gas industries
|
| BS EN ISO 13710-2004
| 石油、石化和天然气工业.往复式变容真空泵
| Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps
|
| BS EN ISO 13734-2001
| 天然气.用做增味剂的有机硫化物.要求和试验方法
| Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods
|
| BS EN ISO 14224-2007
| 石油天然气工业.设备可靠性和维修数据的采集和交换
| Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
|
| BS EN ISO 14310-2002
| 石油和天然气工业.下孔设备.装填器和沙桥卡钻
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs
|
| BS EN ISO 14532-2001
| 天然气.词汇
| Natural gas - Vocabulary
|
| BS EN ISO 14691-2000
| 石油和天然气工业.机械动力传输用柔性接头.一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications
|
| BS EN ISO 14692-1-2003
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.词汇、符号、应用和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Vocabulary, symbols, applications and materials
|
| BS EN ISO 14692-2-2003
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.合格评定和生产
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Qualification and manufacture
|
| BS EN ISO 14692-3-2003
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.系统设计
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - System design
|
| BS EN ISO 14692-4-2003
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.制造、安装和运行
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Fabrication, installation and operation
|
| BS EN ISO 14693-2004
| 石油和天然气工业.钻井和油井辅助设备
| Petroleum and natural gas industries - Drilling and well-servicing equipment
|
| BS EN ISO 14723-2002
| 石油和天然气工业.管道输送系统.海下管道阀门
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
|
| BS EN ISO 15136-1-2001
| 石油和天然气工业的钻孔设备.人工提升用步进式空腔泵系统.泵
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Pumps
|
| BS EN ISO 15136-2-2006
| 石油和天然气工业.人工升降机用推进式腔体泵系统.表面传动系统
| Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Surface drive systems
|
| BS EN ISO 15138-2001
| 石油和天然气工业.海上开采设备.加热、通风和空调设备
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning
|
| BS EN ISO 15156-1-2002
| 石油和天然气工业.在含有HDOWN2S的油气生产环境中使用的材料.防裂材料选择的一般原则
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - General principles for selection of cracking-resistant materials
|
| BS EN ISO 15156-2-2003
| 石油、石化和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化碳和低合金钢及铸铁的使用
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking resistant carbon and low alloy steels, and the use of cast irons
|
| BS EN ISO 15156-3-2003
| 石油、石化和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化CRAs(耐腐蚀合金)和其他合金
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
|
| BS EN ISO 15546-2007
| 石油和天然气工业.铝合金钻杆
| Petroleum and natural gas industries - Aluminium alloy drill pipe
|
| BS EN ISO 15547-1-2006
| 石油、石化和天然气工业.板式热交换器.板框式热交换器
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Plate-and-frame heat exchangers
|
| BS EN ISO 15547-2-2005
| 石油、石化和天然气工业.板式热交换器.铜焊铝板热交换器
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Brazed aluminium plate-fin heat exchangers
|
| BS EN ISO 15663-1-2001
| 石油和天然气工业.寿命周期成本计算.方法论
| Petroleum and natural gas industries - Life cycle costing - Methodology
|
| BS EN ISO 15761-2003
| 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀
| Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
|
| BS EN ISO 16070-2006
| 石油和天然气工业.下降孔设备.锁紧芯轴和落地螺纹接头
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
|
| BS EN ISO 16708-2006
| 石油和天然气工业.管道传输系统.基于可靠性的极限状态法
| Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
|
| BS EN ISO 16812-2007
| 石油、石化和天然气工业.壳管式热交换器
| Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers
|
| BS EN ISO 17078-1-2005
| 石油和天然气工业.钻井和生产设备.偏心轴
| Petroleum and natural gas industries - Drilling and production equipment - Side-pocket mandrels
|
| BS EN ISO 17776-2001
| 石油和天然气工业.海上开采装置.危险识别和风险评定用工具和技术导则
| Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment
|
| BS EN ISO 18453-2006
| 天然气.水含量和水露点的相关性
| Natural gas - Correlation between water content and water dew point
|
| BS EN ISO 19739-2004
| 天然气.用气相色谱法测定硫化合物
| Natural gas - Determination of sulfur compounds using gas chromatography
|
| BS EN ISO 19900-2003
| 石油和天然气工业.海上构筑物的一般要求
| Petroleum and natural gas industries - General requiremenents for offshore structures
|
| BS EN ISO 19901-1-2006
| 石油和天然气工业.海上建筑物的特殊要求.Metocean设计和运行研究
| Petroleum and natural gas industries - Specific requirements for offshore structures - Metocean design and operating considerations
|
| BS EN ISO 19901-2-2005
| 石油和天然气工业.近海建筑物的特殊要求.地震设计规程和标准
| Petroleum and natural gas industries - Specific requirements for offshore structures - Seismic design procedures and criteria
|
| BS EN ISO 19901-4-2003
| 石油和天然气工业.海上建筑物特殊要求.土质和基础设计考虑
| Petroleum and natural gas industries - Specific requirements for offshore structures - Geotechnical and foundation design considerations
|
| BS EN ISO 19901-5-2003
| 石油和天然气工业.海上建筑物的特殊要求.工程设计和建筑中重量的控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Weight control during engineering and construction
|
| BS EN ISO 19901-7-2006
| 石油和天然气工业.海上建筑物的特殊要求.浮动式海上建筑物和移动式海上设备的定位系统
| Petroleum and natural gas industries - Specific requirements for offshore structures - Stationkeeping systems for floating offshore structures and mobile offshore units
|
| BS EN ISO 19903-2007
| 石油和天然气工业.海上固定混凝土结构
| Petroleum and natural gas industries - Fixed concrete offshore structures
|
| BS EN ISO 19904-1-2006
| 石油和天然气工业.浮式海上结构.单体船、半潜水船和船柱
| Petroleum and natural gas industries - Floating offshore structures - Monohulls, semi-submersibles and spars
|
| BS EN ISO 21329-2004
| 石油和天然气工业.管道运输系统.机械连接件的试验程序
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors
|
| BS EN ISO 23251-2006
| 石油、石化和天然气工业.压力释放和降压系统
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems |
| BS EN ISO 3977-5-2002
| 燃气轮机.采购.石油和天然气工业用设施
| Gas turbines - Procurement - Applications for petroleum and natural gas industries
|
| BS EN ISO 6570-2002
| 天然气.烃液潜在含量的测定.比重法
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods
|
| BS EN ISO 6974-1-2000
| 天然气.用气相色谱法测定规定的不确定度的组分.简明分析导则
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Guidelines for tailored analysis
|
| BS EN ISO 6974-2-2001
| 天然气.用气相色谱法测定规定的不确定度的组分.测量.系统特性和数据处理统计
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Measuring-system characteristics and statistics for processing of data
|
| BS EN ISO 6974-3-2000
| 天然气.用气相色谱法测定规定不确定度组分.利用两个封装柱进行氢、氦、氧、氮、二氧化碳和 C8 碳氢化合物的
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium , oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
|
| BS EN ISO 6974-4-2000
| 天然气.用气相色谱法测定规定的不确定度组分.利用两个封装柱对实验室和在线测量系统进行氮、二氧化碳和C1
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
|
| BS EN ISO 6974-5-2000
| 天然气.用气相色谱法测定规定的不确定度组分.利用三个封装柱对实验室和在线过程应用系统进行氮、二氧化碳和
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
|
| BS EN ISO 6975-1997
| 天然气.延伸分析.气相色谱法
| Natural gas - Extended analysis - Gas chromatographic method
|
| BS EN ISO 6978-1-2003
| 天然气.汞的测定.用碘化学吸附法进行汞的采样
| Natural gas - Determination of mercury - Sampling of mercury by chemisorption on iodine
|
| BS EN ISO 6978-2-2003
| 天然气.汞的测定.用碘/铂合金混和法采样汞
| Natural gas - Determination of mercury - Sampling of mercury by amalgamation on gold/platinum alloy
|
| BS ISO 10414-1-2001
| 石油和天然气工业.钻探油液的现场试验.水基油液
| Petroleum and natural gas industries - Field testing of drilling fluids - Water-based fluids - Part 1: Water-based fluids
|
| BS ISO 10414-2-2002
| 石油和天然气工业.钻井流体的现场试验.油基的液体
| Petroleum and natural gas industries - Field testing of drilling fluids - Oil-based fluids
|
| BS ISO 10416-2002
| 石油和天然气工业.钻井液.实验室试验
| Petroleum and natural gas industries - Drilling fluids - Laboratory testing
|
| BS ISO 10425-2003
| 石油和天然气工业用钢丝绳.最低要求和验收条件
| Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
|
| BS ISO 10426-3-2003
| 石油和天然气工业.油井固井用水泥和材料.深水油井水泥成分的测试
| Petroleum and natural gas industries - Cements and materials for well cementing - Testing of deepwater well cement formulations
|
| BS ISO 12213-1-1998
| 天然气.压缩因数的计算.介绍和指南
| Natural gas - Calculation of compression factors - Introduction and guidelines
|
| BS ISO 12213-2-1998
| 天然气.压缩因数的计算.第2部分:使用摩尔成分分析法计算
| Natural gas - Calculation of compression factors - Calculation using a molar composition analysis
|
| BS ISO 12213-3-1998
| 天然气.压缩因数的计算.采用实测物理性能计算
| Natural gas - Calculation of compression factors - Calculation using measured physical properties
|
| BS ISO 13443-1997
| 天然气.标准参考条件
| Natural gas - Standard reference conditions
|
| BS ISO 13501-2006
| 石油和天然气工业.钻井液.作业系统评估
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation
|
| BS ISO 13503-1-2003
| 石油和天然气工业.完井液和材料.完井液粘性的测量
| Petroleum and natural gas industries - Completion fluids and materials - Measurement of viscous properties of completion fluids
|
| BS ISO 13628-5-2002
| 石油和天然气工业.海底开采系统的设计和操作.海底开采控制系统联系缆
| Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea umbilicals
|
| BS ISO 13628-7-2005
| 石油和天然气工业.水下采油系统的设计和操作.完井/修井提升管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Completion/workover riser systems
|
| BS ISO 13628-8-2002
| 石油和天然气工业.海底采油系统的设计和操作.海底开采控制系统的遥控运送装置的接口
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems
|
| BS ISO 13628-9-2001
| 石油和天然气工业.海底开采系统的设计和运行.远程操作工具(ROT)介入系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated tool (ROT) intervention systems
|
| BS ISO 13678-2001
| 石油和天然气工业.与铸件、管材和管道一起使用的螺纹复合物制件的评价和试验
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe
|
| BS ISO 13679-2003
| 石油和天然气工业.套管和管道连接的检验规程
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections
|
| BS ISO 13691-2002
| 石油和天然气工业.高速专用齿轮装置
| Petroleum and natural gas industries - High-speed special-purpose gear units
|
| BS ISO 13704-2002
| 石油和天然气工业.炼油厂中加热器管厚度的校准
| Petroleum and natural gas industries - Calculation of heater-tube thickness in petroleum refineries
|
| BS ISO 13879-2000
| 石油和天然气工业.功能规范的内容和起草
| Petroleum and natural gas industries - Content and drafting of functional specifications
|
| BS ISO 13880-2000
| 石油和天然气工业.技术规范的内容和起草
| Petroleum and natural gas industries - Content and drafting of a technical specification
|
| BS ISO 14469-3-2006
| 道路车辆.压缩天然气(CNG)填充连接器.25 MPa (250 bar)连接器
| Road vehicles - Compressed natural gas (CNG) refuelling connector - 25 MPa (250 bar) connector
|
| BS ISO 14532-2001
| 天然气,词汇
| Natural gas - Vocabulary
|
| BS ISO 15403-2000
| 天然气.作为车辆压缩燃料使用的天然气质量牌号
| Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles
|
| BS ISO 15544-2001
| 石油和天然气工业.海上开采装置.紧急响应的要求和指南
| Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response - Requirements and guidelines for emergency response
|
| BS ISO 15649-2001
| 石油和天然气工业.管道
| Petroleum and natural gas industries - Piping
|
| BS ISO 15663-1-2001
| 石油和天然气工业.寿命周期成本.方法学
| Petroleum and natural gas industries - Life cycle costing - Methodology
|
| BS ISO 15663-2-2001
| 石油和天然气工业.寿命周期成本.方法论的应用和计算方法指南
| Petroleum and natural gas industries - Life cycle costing - Guidance on application of methodology and calculation methods
|
| BS ISO 15663-3-2001
| 石油和天然气工业.生命周期成本.实施指南
| Petroleum and natural gas industries - Life cycle costing - Implementation guidelines - Part 3: Implementation guidelines
|
| BS ISO 17776-2001
| 石油和天然气工业.近海生产装置.危险识别和风险评估用工具和技术指南
| Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment
|
| BS ISO 19078-2007
| 储气瓶.机动车辆用天然气道上燃料储气瓶装置检验和高压储气瓶的合格鉴定
| Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
|
| BS ISO 19739-2004
| 天然气.用气相色谱法测定硫化合物的含量
| Natural gas - Determination of sulfur compounds using gas chromatography
|
| BS ISO 19903-2007
| 石油和天然气工业.固定混凝土海上平台
| Petroleum and natural gas industries - Fixed concrete offshore structures
|
| BS ISO 19904-1-2006
| 石油和天然气工业.漂浮海上设施.单体船、半潜水船和轻甲板船
| Petroleum and natural gas industries - Floating offshore structures - Monohulls, semi-submersibles and spars
|
| BS ISO 23251-2006
| 石油、石化和天然气工业.释放压力和解压系统
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems
|
| BS ISO 23874-2007
| 天然气.碳氢化合物露点计算用气相色谱法的要求
| Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation
|
| BS ISO 3977-5-2002
| 燃气轮机.采购.供石油和天然气工业应用
| Gas turbines - Procurement - Applications for petroleum and natural gas industries
|
| BS ISO 6570-2002
| 天然气.潜在烃液含量的测定.测重法
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods
|
| BS ISO 6974-1-2000
| 天然气.用气相色谱法测定规定的不确定度的组分.第1部分:简明分析导则
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Guidelines for tailored analysis
|
| BS ISO 6974-2-2001
| 天然气.用气相色谱法测定规定的不确定度的组分.测量系统特性和数据处理的稳定性用定性和统计巡饬肯低厂
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Measuring-system characteristics and statistics for processing of data
|
| BS ISO 6974-3-2000
| 天然气.用气相色谱法测定规定的不确定度的组分.用两个填充柱测定氢、氦、氧、氮、二氧化碳和达到C8的烃类
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
|
| BS ISO 6974-4-2000
| 天然气.用气相色谱法测定规定的不确定度的组分.第4部分:用两柱测定实验室和在线测量系统用的氮、二氧化碳和
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
|
| BS ISO 6974-5-2000
| 天然气.用气相色谱法测定规定的不确定度的组分.用三柱测定实验室和在线处理用的氮、二氧化碳和C<下标1>到C<
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
|
| BS ISO 6974-6-2002
| 天然气.用气相色谱法测定具有规定不定度的成分.用三毛细管柱测定氢、氦、氧、氮、二氧化碳和CDOWN1 至 CDOW
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium , oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
|
| BS ISO 6978-1-2003
| 天然气.汞的测定.用碘化学吸附法对汞的采样
| Natural gas - Determination of mercury - Sampling of mercury by chemisorption on iodine
|
| BS ISO 6978-2-2003
| 天然气.汞的测定.用金/铂合金混汞法对汞的采样
| Natural gas - Determination of mercury - Sampling of mercury by amalgamation on gold/platinum alloy
|
| BS ISO/TS 16922-2002
| 天然气.添味气体的导则
| Natural gas - Guidelines for odorizing gases
|
| PD ISO/TR 13881-2001
| 石油和天然气工业.产品、加工和服务的分类和符合性评定
| Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services
|
| 编号 | 中文名称 | 英文名称 |
|---|