| 编号 | 中文名称 | 英文名称 |
|---|
| EN 1160-1996
| 液化天然气用设备和装置 液化天然气的一般性能
| Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas
|
| EN 12065-1997
| 液化天然气设备和安装 为产生液化天然气火焰灭火粉末及产生中高膨胀泡沫的泡沫浓缩物的试验
| Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires
|
| EN 12066-1997
| 液化天然气设备和安装 液化天然气蓄气区域用绝缘套管的试验
| Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas
|
| EN 12308-1998
| 液化天然装置和设备 液化天然气管道中所用的法兰接头垫圈设计适配性试验
| Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
|
| EN 12838-2000
| 液化天然气（LNG）装置和设备 LNG采样系统适用性检验
| Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems
|
| EN 13423-2000
| 压缩天然气车辆操作
| Compresses natural gas vehicle operations
|
| EN 13942-2003
| 石油和天然气工业 管道运输系统 管道阀门
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999, modified)
|
| EN 14163-2001
| 石油和天然气工业 管道运输系统 管道的焊接
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified)
|
| EN 1473-1997
| 液化天然气的安装和设备 近海安装的设计
| Installation and equipment for liquefied natural gas - Design of onshore installations
|
| EN 1474-1997
| 液化天然气安装和设备 装卸臂设计和检测
| Installation and equipment for liquefied natural gas - Design and testing of loading/unloading arms
|
| EN 1532-1997
| 液化天然气的安装和设备 船一岸接口
| Installation and equipment for liquefied natural gas - Ship to shore interface
|
| EN 1762-1997
| 气压为25bar(2.5MPa)及以下的液化石油气LPG(液相或气相)及天然气用橡胶软管和软管组件 规范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
|
| EN 1776-1998
| 供气 天然气测量站 功能要求
| Gas supply systems - Natural gas measuring stations - Functional requirements
|
| EN ISO 10101-1-1998
| 天然气 卡尔·费休法测定天然气中的水 第1部分：介绍
| Natural gas - Determination of water by the Karl Fischer method - Part 1: Introduction (ISO 10101-1:1993)
|
| EN ISO 10101-2-1998
| 天然气 卡尔·费休法测定天然气中的水 第2部分：滴水法
| Natural gas - Determination of water by the Karl Fischer method - Part 2: Titration procedure (ISO 10101-2:1993)
|
| EN ISO 10101-3-1998
| 天然气 卡尔·费休法测定天然气中的水 第3部分：库仑法
| Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:1993)
|
| EN ISO 10423-2001
| 石油和天然气工业 钻井及开采设备 井口及圣诞树形设备
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2001)
|
| EN ISO 10426-1-2000+A1-2002
| 石油和天然气工业 油井固井用水泥和材料 第1部分：规范
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2000)
|
| EN ISO 10427-1-2001
| 石油和天然气工业 套管找中器 第1部分：弓簧套管找中器
| Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001)
|
| EN ISO 10432-1999
| 石油和天然气工业 下降孔设备 地下安全阀设备
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:1999)
|
| EN ISO 10437-2003
| 石油，石油化工和天然气工业 汽轮机 特殊用途设备
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003)
|
| EN ISO 10439-2002
| 石油，石油化工和天然气工业 离心压缩机
| Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002)
|
| EN ISO 10440-1-2000
| 石油和天然气工业 旋转型容积式压缩机 第1部分：加工压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive displacement compressors - Part 1: Process compressors (oil-free) (ISO 10440-1:2000)
|
| EN ISO 10440-2-2001
| 石油和天然气工业 旋转型容积式压缩机 第2部分：整装空气压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
|
| EN ISO 10441-1999
| 石油和天然气工业 机械动力传输用挠性接箍 特殊应用
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - Special purpose applications (ISO 10441:1999)
|
| EN ISO 10442-2002
| 石油，石油化工和天然气工业 整装齿轮离心空气压缩机
| Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002)
|
| EN ISO 10715-2000
| 天然气 取样指南
| Natural gas - Sampling guidelines (ISO 10715:1997)
|
| EN ISO 10723-2002
| 天然气 在线分析系统的性能评定
| Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995)
|
| EN ISO 11439-2000
| 气瓶 车上贮存机动车用天然气燃料用高压气瓶
| Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000)
|
| EN ISO 11541-2002
| 天然气 高压下含水量的测定/注：认可通知
| Natural gas - Determination of water content at high pressure (ISO 11541:1997)
|
| EN ISO 11960-2001+AC-2002
| 石油和天然气工业 油井套管和油管用钢管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001)
|
| EN ISO 11961-1996
| 石油和天然气工业 钻井杆用钢管 规范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996)
|
| EN ISO 13500-1998
| 石油和天然气工业 钻井液体材料 规范和测试
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:1998)
|
| EN ISO 13533-2001
| 石油和天然气工业 钻井和生产设备 钻孔设备
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001)
|
| EN ISO 13534-2000
| 石油和天然气工业 钻井和生产设备 提升设备的检查、维护、修理和再制造
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000)
|
| EN ISO 13535-2000
| 石油和天然气工业 钻井和生产设备 提升设备
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000)
|
| EN ISO 13625-2002
| 石油和天然气工业 钻探和开采设备 海洋钻机提升机联结器
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002)
|
| EN ISO 13628-1-1999
| 石油和天然气工业 水下采油系统的设计和操作 第1部分：一般要求和建议
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:1999)
|
| EN ISO 13628-2-2000
| 石油和天然气工业 水下采油系统的设计和操作 第2部分：海底和海洋设备用软管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000)
|
| EN ISO 13628-3-2000
| 石油和天然气工业 水下采油系统的设计和操作 第3部分：通流线系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000)
|
| EN ISO 13628-4-1999
| 石油和天然气工业 水下采油系统的设计和操作 第4部分：井口和采油树设备
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999)
|
| EN ISO 13631-2002
| 石油和天然气工业 整装往复式气体压缩机
| Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
|
| EN ISO 13680-2001
| 石油和天然气工业 用作套管、油管和接箍的防腐合金无缝钢管交货技术条件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000)
|
| EN ISO 13691-2002
| 石油和天然气工业 特殊用途高速齿轮装置
| Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001)
|
| EN ISO 13702-1999
| 石油和天然气工业 对海上开发安装中着火和爆炸的控制和减弱要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999)
|
| EN ISO 13703-2000
| 石油和天然气工业 海上开采平台上管道系统的设计和安装
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000)
|
| EN ISO 13705-2001
| 石油和天然气工业 一般炼油厂的烧火的加热器
| Petroleum and natural gas industries - Fired heaters for general refinery service (ISO 13705:2001)
|
| EN ISO 13706-2000
| 石油和天然气工业 风冷热交换器
| Petroleum and natural gas industries - Air-cooled heat exchangers (ISO 13706:2000)
|
| EN ISO 13734-2000
| 天然气 有机硫化物添味剂 要求和试验方法
| Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods (ISO 13734:1998)
|
| EN ISO 14111-1999
| 天然气 分析溯源性准则
| Natural gas - Guidelines for traceability in analysis (ISO 14111:1997)
|
| EN ISO 14310-2001
| 石油和天然气工业 井下设备 装填器和桥状砂堵
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001)
|
| EN ISO 14691-2000
| 石油和天然气工业 机械动力传输挠性接箍 一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999)
|
| EN ISO 14692-1-2002
| 石油和天然气工业 玻璃纤维增强塑料管 第1部分：词汇、符号、设备和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002)
|
| EN ISO 14692-2-2002
| 石油和天然气工业 玻璃纤维增强塑料管 第2部分：资格和制造
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002)
|
| EN ISO 14692-3-2002
| 石油和天然气工业 玻璃纤维增强塑料管 第3部分：系统设计
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002)
|
| EN ISO 14692-4-2002
| 石油和天然气工业 玻璃纤维增强塑料管 第4部分：制造 、安装和运行
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002)
|
| EN ISO 14723-2001
| 石油和天然气工业 管道输送系统 海底管道阀
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001)
|
| EN ISO 15136-1-2001
| 石油和天然气的井下设备 人工升降梯的空腔泵系统 第1部分：泵
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001)
|
| EN ISO 15138-2000
| 石油和天然气工业 海上开采装置 供暖 通风和空气调节
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2000)
|
| EN ISO 15156-1-2001
| 石油和天然气工业 在石油和天然气生产中用于硫化氢环境的材料 第1部分：耐裂材料选择的一般原则
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001)
|
| EN ISO 15546-2002
| 石油和天然气工业 铝合钻管
| Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002)
|
| EN ISO 15547-2001
| 石油和天然气工业 板式热交换器
| Petroleum and natural gas industries - Plate heat exchangers (ISO 15547:2000)
|
| EN ISO 15761-2002
| 石油及天然气工业用DN100及较小的钢闸阀 、球阀和防逆阀
| Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002)
|
| EN ISO 16070-2001
| 石油和天然气工业 井下设备 闭锁心轴和落地短接管
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2001)
|
| EN ISO 17776-2002
| 石油和天然气工业 海上生产装置 危险识别和风险评定用工具和技术的指南
| Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000)
|
| EN ISO 19900-2002
| 石油和天然气工业 海上结构的一般要求
| Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002)
|
| EN ISO 19901-4-2003
| 石油和天然气工业 海上结构的特殊要求 第4部分：土工技术和基础设计的考虑内容
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003)
|
| EN ISO 19901-5-2003
| 石油和天然气工业 海上结构的特殊要求 第5部分：设计和施工中的重量控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003)
|
| EN ISO 3977-5-2003
| 燃气轮机 采购 第5部分：石油与天然气工业的应用
| Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)
|
| EN ISO 6326-3-1997
| 天然气 硫化物的测定 第3部分：用电势分析法对硫化氢、硫醇硫和硫化羰基硫的测定
| Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989)
|
| EN ISO 6326-5-1997
| 天然气 硫化物的测定 第5部分：林格聂尔燃烧法
| Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989)
|
| EN ISO 6974-1-2001
| 天然气 用气相色谱法测定规定的不确定度的组分 第1部分：简明分析导则
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis (ISO 6974-1-2000)
|
| EN ISO 6974-2-2002
| 天然气 用气相色谱法测定规定的不确定度的组分 第2部分：测量系统的特性和数据处理的统计
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data (ISO 6974-2:2001)
|
| EN ISO 6974-3-2001
| 天然气 用气相色谱法测定规定的不确定度的组分 第3部分：用两填充柱测定氢、氦、氧、氮、二氧化碳和C8的
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (ISO 6974-3:2000)
|
| EN ISO 6974-4-2001
| 天然气 用气相色谱法测定规定的不确定度的组分 第4部分：用两柱测定实验室和在线测量系统用的氮、二氧化
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:20
|
| EN ISO 6974-5-2001
| 天然气 用气相色谱法测定规定的不确定度的组分 第5部分：用三柱测定实验室和在线外处理用的氮、二氧化碳
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns (ISO 6974
|
| prEN 14141-2003
| 天然气管道输送阀 试验和性能要求
| Valves for natural gas transportation in pipelines - Performance requirements and tests
|
| prEN 14161-2003
| 石油和天然气工业 管道运输系统
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified)
|
| prEN 1762-2003
| 气压为25bar(2.5MPa)液化石油气LPG(液相或气相)及天然气用橡胶软管和软管组件 规范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification / Note: Intended as replacement for EN 1762 (1997-10).
|
| prEN ISO 10434-2002
| 石油和天然气工业用螺栓帽状钢闸阀
| Bolted bonnet steel gate valves for petroleum and natural gas industries (ISO/DIS 10434:2002)
|
| prEN ISO 13707-2000
| 石油和天然气工业 往复式压缩机
| Petroleum and natural gas industries - Reciprocating compressors (ISO/FDIS 13707:2000)
|
| prEN ISO 15156-3-2003
| 石油和天然气工业 在石油和天然气生产中用于硫化氢环境的材料 第3部分：耐裂合金(CRAs)(耐蚀合金)和其他
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO/FDIS 15156-3:2003)
|
| 编号 | 中文名称 | 英文名称 |
|---|