| 编号 | 中文名称 | 英文名称 |
|---|
| DIN CEN/TS 15174-2006
| 燃气供应系统.天然气运输管道的安全管理系统的指南
| Gas supply systems - Guideline for safety management systems for natural gas transmission pipelines; German version CEN/TS 15174:2006
|
| DIN EN 1160-1996
| 液化天然气设备和装置.液化天然气的一般性能
| Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas; German version EN 1160:1996
|
| DIN EN 12065-1998
| 液化天然气的设备和装置.防止液化天然气着火(LNG-燃烧)用的中等膨胀发泡,高速膨胀发泡以及熄灭粉沫发泡的泡
| Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires; German version EN 12065:1997
|
| DIN EN 12066-1998
| 液化天然气用装置和设备.液化天然气收集盆的隔热层的试验
| Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas; German version EN 12066:1997
|
| DIN EN 12308-1998
| 液体天然气设施和设备.液体天然气管道使用的法兰连接件的密封垫片的适用性试验
| Installations and equipment for liquefied natural gas - Suitability testing of gaskets designed for flanged joints used on LNG piping; German version EN 12308:1998
|
| DIN EN 12567-2000
| 工业阀门.液化天然气用隔离阀.适用性及适用验证试验规范
| Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests; German version EN 12567:2000
|
| DIN EN 12838-2000
| 液化天然气装置和设备.LNG抽样系统的适用性检验
| Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems; German version EN 12838:2000
|
| DIN EN 13423-2001
| 压缩天然气车辆操作
| Compressed natural gas vehicle operations; German version EN 13423:2000
|
| DIN EN 13645-2002
| 液态天然气装置和设备.储存容量为5吨至200吨的岸上装置的设计; 德文版本 EN 13645:2001
| Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t; German version EN 13645:2001
|
| DIN EN 13766-2003
| 液化石油气和液化天然气输送热塑性多层非硫化软管和软管组件.规范
| Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification; German version EN 13766:2003
|
| DIN EN 13942-2005
| 石油和天然气工业.管道输送系统.管道阀
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified); English version EN 13942:2003
|
| DIN EN 14141-2004
| 天然气输送管道用阀门.性能要求和试验
| Valves for natural gas transportation in pipelines - Performance requirements and tests; German version EN 14141:2003
|
| DIN EN 14161-2004
| 石油和天然气工业.管道传输系统
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified); German and English version EN 14161:2003
|
| DIN EN 14163 Berichtigung 1-2006
| 石油和天然气工业.管道运输系统.管道焊接
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text german and english, Corrigenda to DIN EN 14163:2002-09; German and English version EN 14163:2001/AC:2006
|
| DIN EN 14163-2002
| 石油工业和天然气工业.管道输送系统.管路焊接 (ISO 13847:2000, 修订版); 德文版本 EN 14163:2001、德文和
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text German and English
|
| DIN EN 1473-2007
| 液化天然气的安装和设备.岸上安装的设计
| Installation and equipment for liquefied natural gas - Design of onshore installations; German version EN 1473:2007
|
| DIN EN 1474-1997
| 液化天然气设备和装置.装载和卸载臂的设计和检验
| Installations and equipment for liquefied natural gas - Design and testing of loading/unloading arms; German version EN 1474:1997
|
| DIN EN 14870-1-2005
| 石油和天然气工业.管道输送系统用进气弯头、管件和法兰.第1部分:进气弯头
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified); English version EN 14870-1:2004
|
| DIN EN 14870-2-2005
| 石油和天然气工业.管道输送系统用进气弯管、管件和法兰.第2部分:管件
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified); English version EN 14870-2:2004
|
| DIN EN 14870-3-2006
| 石油和天然气工业.管道输送系统用进气弯管、配件和法兰.第3部分:法兰
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004 modified); English version EN 14870-3:2006
|
| DIN EN 1532-1997
| 液化天然气设备和装置.海滨交接船舶
| Installations and equipment for liquefied natural gas - Ship to shore interface; German version EN 1532:1997
|
| DIN EN 1762-2004
| 25巴(2.5MPA)及以下液化石油气、LPG(液相和气相)和天然气用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase) and natural gas up to 25 bar (2,5 MPa) - Specification; German version EN 1762:2003
|
| DIN EN 1776-1999
| 供气系统.天然气测量站.功能要求
| Gas supply systems - Natural gas measuring stations - Functional requirements; German version EN 1776:1998
|
| DIN EN 1918-2-1998
| 供气系统.气体的地下存储.第2部分:油田和天然气田中存储设施的功能性推荐标准
| Gas supply systems - Unterground gas storage - Part 2: Functional recommendations for storage in oil and gas fields; German version EN 1918-2:1998
|
| DIN EN ISO 10405-2007
| 石油和天然气工业.套管和油管的维护和使用
| Petroleum and natural gas industries - Care and use of casing and tubing (ISO 10405:2000); German and English version EN ISO 10405:2006
|
| DIN EN ISO 10417-2005
| 石油和天然气工业.井下安全阀系统.设计、安装、操作和修整
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004); English version EN ISO 10417:2004
|
| DIN EN ISO 10418-2005
| 石油和天然气工业.近海生产装置.基础表面操作安全系统
| Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems (ISO 10418:2003); English version EN ISO 10418:2003
|
| DIN EN ISO 10423-2005
| 石油和天然气工业.钻井和开采设备.井口设施和采油树设备
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2003); English version EN ISO 10423:2004
|
| DIN EN ISO 10424-1-2005
| 石油和天然气工业.旋转钻井设备.第1部分:旋转钻杆元件
| Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004); English version EN ISO 10424-1:2004
|
| DIN EN ISO 10426-1-2007
| 石油和天然气工业.油井固井用水泥和材料.第1部分:规范(ISO 10426-1-2005)
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2005); English version EN ISO 10426-1:2006
|
| DIN EN ISO 10426-2-2006
| 石油和天然气工业.油井固井用水泥和材料.第2部分:油井用水泥的试验(ISO 10426-2-2003 + Amd. 1-2005).英文
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO 10426-2:2003 + Amd. 1:2005); English version EN ISO 10426-2:2003 + A1:2005
|
| DIN EN ISO 10426-3-2005
| 石油和天然气工业.油井固井用水泥和材料.第3部分:深水油井水泥成分的测试
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO 10426-3:2003); English version EN ISO 10426-3:2004
|
| DIN EN ISO 10426-4-2005
| 石油和天然气工业.油井固井用水泥和材料.第4部分:在大气压力下泡沫水泥浆的制备和检验
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO 10426-4:2004); English version EN ISO 10426-4:2004
|
| DIN EN ISO 10426-5-2006
| 石油和天然气工业.油井固井用水泥和材料.第5部分:在大气压力下固井水泥加工制剂的收缩和膨胀的测定(ISO 104
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure (ISO 10426-5:2004); English version EN ISO 10426-5:2005
|
| DIN EN ISO 10427-1-2003
| 石油天然气工业.套管扶正器.第1部分:弓形弹簧式套管扶正器
| Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001); German and English version EN ISO 10427-1:2001
|
| DIN EN ISO 10427-2-2005
| 石油和天然气工业.固井用设备.第2部分:扶正器的放置和限动环的检测
| Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing (ISO 10427-2:2004); English version EN ISO 10427-2:2004
|
| DIN EN ISO 10427-3-2005
| 石油和天然气工业.固井用设备.第3部分:固井浮动式设备的性能试验
| Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment (ISO 10427-3:2003); English version EN ISO 10427-3:2004
|
| DIN EN ISO 10432-2005
| 石油和天然气工业.下降孔设备.地下安全阀设备
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004); English version EN ISO 10432:2004
|
| DIN EN ISO 10437-2005
| 石油、石油化学和天然气工业.专用汽轮机
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003); English version EN ISO 10437:2003
|
| DIN EN ISO 10438-1-2005
| 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第1部分:一般要求
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2003); English version EN ISO 10438-1:2003
|
| DIN EN ISO 10438-2-2005
| 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第2部分:专用油系统
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems (ISO 10438-2:2003); English version EN ISO 10438-2:2003
|
| DIN EN ISO 10438-3-2005
| 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第3部分:通用油系统
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2003); English version EN ISO 10438-3:2003
|
| DIN EN ISO 10438-4-2005
| 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第4部分:自动气封支撑系统
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2003); English version EN ISO 10438-4:2003
|
| DIN EN ISO 10440-1-2004
| 石油和天然气工业.旋转型容积式压缩机.第1部分:加工压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive displacement compressors - Part 1: Process compressors (oil-free) (ISO 10440-1:2000); German and English version EN ISO 10440-1:2000
|
| DIN EN ISO 10440-2-2003
| 石油和天然气工业.旋转型容积式压缩机.第2部分:封装空气压缩机(无油)
| Petroleum and natural gas industries - Rotary type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001); German and English version EN ISO 10440-2:2001
|
| DIN EN ISO 10441-2007
| 石油、石化和天然气工业.机械动力传输用挠性接箍.特殊应用(ISO 10441-2007)
| Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-purpose applications (ISO 10441:2007); English version EN ISO 10441:2007
|
| DIN EN ISO 10715-2000
| 天然气.取样导则
| Natural gas - Sampling guidelines (ISO 10715:1997); German version EN ISO 10715:2000
|
| DIN EN ISO 10723-2003
| 天然气.在线分析系统性能评价
| Natural gas - Performance evaluation for on-line analytical systems (ISO 10723:1995); German version EN ISO 10723:2002
|
| DIN EN ISO 11439-2001
| 气瓶.用作机动车燃料的天然气车载高压气瓶
| Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000); German version EN ISO 11439:2000
|
| DIN EN ISO 11541-2003
| 天然气.高压下含水量测定
| Natural gas - Determination of water content at high pressure (ISO 11541:1997); German version EN ISO 11541:2002
|
| DIN EN ISO 11960-2005
| 石油和天然气工业.油井套管或油管用钢管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2004); English version EN ISO 11960:2004
|
| DIN EN ISO 11961-1997
| 石油和天然气工业.钻井杆钢管.要求
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996); German version EN ISO 11961:1996
|
| DIN EN ISO 12213-1-2005
| 天然气.压缩因子的计算.第1部分:说明和指南
| Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines (ISO 12213-1:1997); German version EN ISO 12213-1:2005
|
| DIN EN ISO 12213-2-2005
| 天然气.压缩因子的计算.第2部分:摩尔代数运算分析
| Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:1997); German version EN ISO 12213-2:2005
|
| DIN EN ISO 12213-3-2005
| 天然气.压缩因子的计算.第3部分:用物理特性计算
| Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:1997); German version EN ISO 12213-3:2005
|
| DIN EN ISO 13443-2007
| 天然气.标准参比条件(ISO 13443:1996, including Corrigendum 1:1997)
| Natural gas - Standard reference conditions (ISO 13443:1996, including Corrigendum 1:1997); German version EN ISO 13443:2005
|
| DIN EN ISO 13500-2006
| 石油和天然气工业.钻井液体材料.规范和试验(ISO 13500-2006)
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2006); English version EN ISO 13500:2006
|
| DIN EN ISO 13501-2007
| 石油和天然气工业.钻井液.加工系统评价
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation (ISO 13501:2005); English version EN ISO 13501:2006
|
| DIN EN ISO 13503-1-2005
| 石油和天然气工业.完井液和材料.第1部分:完井液粘着特性的测量
| Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids (ISO 13503-1:2003); English version EN ISO 13503-1:2005
|
| DIN EN ISO 13503-2-2007
| 石油和天然气工业.完井液和材料.第2部分:水力压裂和砾石填充作业用支撑剂性能测定
| Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations (ISO 13503-2:2006); English version EN ISO 13503-2:2006
|
| DIN EN ISO 13503-3-2006
| 石油和天然气工业.完井液和材料.第3部分:重盐水的试验(ISO 13503-3:2005)
| Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines (ISO 13503-3:2005); English version EN ISO 13503-3:2005
|
| DIN EN ISO 13503-4-2007
| 石油和天然气工业.完井液和材料.第4部分:增产液和砾石填充液静态渗漏测量程序
| Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions (ISO 13503-4:2006); English version EN ISO 13503-4:2006
|
| DIN EN ISO 13503-5-2006
| 石油和天然气工业.完井液和材料.第5部分:测量重盐水长期电导率程序(ISO 13503-5:2006)
| Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006); English version EN ISO 13503-5:2006
|
| DIN EN ISO 13533 Berichtigung 1-2006
| 石油和天然气工业.钻探和生产设备.钻孔设备
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001); German version EN ISO 13533:2001, Corrigenda to DIN EN ISO 13533:2002-12; German version EN ISO 13533:2001/AC:2006
|
| DIN EN ISO 13533-2002
| 石油工业和天然气工业.钻井和生产设备.钻井设备 (ISO 13533:2001); 德文版本 EN ISO 13533:2001 (德文和英
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001); German version EN ISO 13533:2001 (Text in German and English)
|
| DIN EN ISO 13534-2001
| 石油和天然气工业.钻探和生产设备.提升设备的检验、维护、修理和再制造
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000); German version EN ISO 13534:2000
|
| DIN EN ISO 13535-2002
| 石油工业和天然气工业.钻井和生产设备.起重机设备 (ISO 13535:2000); 德文版本 EN ISO 13535:2000 (德文和
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000); German version EN ISO 13535:2000 (German and English texts)
|
| DIN EN ISO 13625-2005
| 石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002); English version EN ISO 13625:2002
|
| DIN EN ISO 13626-2005
| 石油和天然气工业.钻井和生产设备.钻井和井检修结构
| Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures (ISO 13626:2003); English version EN ISO 13626:2004
|
| DIN EN ISO 13628-1-2006
| 石油和天然气工业.水下采油系统的设计和操作.第1部分:一般要求和建议(ISO 13628-1-2005).英文版本 EN ISO 1
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:2005); English version EN ISO 13628-1:2005
|
| DIN EN ISO 13628-10-2007
| 石油和天然气工业.水下开采系统的设计和操作.第10部分:连接柔性管规范
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2005); English version EN ISO 13628-10:2006
|
| DIN EN ISO 13628-2-2006
| 石油天然气工业.海底生产系统设计和操作.第2部分:海底和船用自由软管系统(ISO 13628-2-2006)
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006); English version EN ISO 13628-2:2006
|
| DIN EN ISO 13628-3-2003
| 石油和天然气工业.水下采油系统的设计和操作.第3部分:通流线系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000); German and English version EN ISO 13628-3:2000
|
| DIN EN ISO 13628-4-1999
| 石油和天然气工业.水下生产系统的设计和操作.第4部分:水下井口和主干设备
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999); German version EN ISO 13628-4:1999
|
| DIN EN ISO 13628-7-2007
| 石油和天然气工业.水下采油系统的设计和操作.第7部分:完井/修井提升管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005); English version EN ISO 13628-7:2006
|
| DIN EN ISO 13631-2003
| 石油和天然气工业.封装往复式空气压缩机
| Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002); German and English version EN ISO 13631:2002
|
| DIN EN ISO 13679-2007
| 石油和天然气工业.套管和管道连接器的测试程序(ISO 13679-2002)
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2002); English version EN ISO 13679:2006
|
| DIN EN ISO 13680-2002
| 石油工业和天然气工业.用作套管、铺设管道和连接器材的耐腐蚀合金无缝管.技术交货条件 (ISO 13680:2000);
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000); German version EN ISO 13680:2001
|
| DIN EN ISO 13686-2007
| 天然气.质量指标
| Natural gas - Quality designation (ISO 13686:1998); German version EN ISO 13686:2005
|
| DIN EN ISO 13691-2003
| 石油和天然气工业.高速专用齿轮机构
| Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002
|
| DIN EN ISO 13702-2000
| 石油和天然气工业.海上生产设备着火和爆炸的控制和减弱.要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999); German version EN ISO 13702:1999
|
| DIN EN ISO 13703-2003
| 石油天然气工业.海上作业平台管道系统的设计和安装
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000 + Cor. 1:2002); German and English version EN ISO 13703:2000 + AC:2002
|
| DIN EN ISO 13705-2007
| 石油和天然气工业.一般炼油厂用火焰加热器
| Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2006); English version EN ISO 13705:2006
|
| DIN EN ISO 13706-2006
| 石油、石化和天然气工业.风冷热交换器 (ISO 13706-2005).英文版本 EN ISO 13706-2005
| Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2005); English version EN ISO 13706:2005
|
| DIN EN ISO 13709-2005
| 石油、石油化工和天然气工业用离心泵
| Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2003); English version EN ISO 13709:2003
|
| DIN EN ISO 13710-2005
| 石油、石油化学和天然气工业.往复式变容真空泵
| Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004); English version EN ISO 13710:2004
|
| DIN EN ISO 13734-2000
| 天然气.有机硫化物添味剂.要求和试验方法
| Natural gas - Organic sulfur compounds used as odorants - Requirements and test method (ISO 13734:1998); German version EN ISO 13734:2000
|
| DIN EN ISO 14111-2000
| 天然气.分析溯源性准则
| Natural gas - Guidelines to traceability in analysis (ISO 14111:1997); German version EN ISO 14111:1999
|
| DIN EN ISO 14224-2007
| 石油、石化和天然气工业.设备可靠性和维修数据的采集与交换
| Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment (ISO 14224:2006); English version EN ISO 14224:2006
|
| DIN EN ISO 14310-2003
| 石油和天然气工业.下井设备.封隔器和桥塞
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001); German version EN ISO 14310:2001; German and English texts
|
| DIN EN ISO 14532-2007
| 天然气.词汇(ISO 14532:2001, including Corrigendum 1:2002)
| Natural gas - Vocabulary (ISO 14532:2001, including Corrigendum 1:2002); German version EN ISO 14532:2005
|
| DIN EN ISO 14691-2002
| 石油和天然气工业.机械动力传输柔性耦合.一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999); German version EN ISO 14691:2000 (German and english text)
|
| DIN EN ISO 14692-1-2005
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第1部分:词汇、符号、应用和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002); English version EN ISO 14692-1:2002
|
| DIN EN ISO 14692-2 Berichtigung 1-2007
| 石油和天然气工业.玻璃纤维增强塑料.第2部分:生产资格
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002, Corrigenda to DIN EN ISO 14692-2:2005-07; English version EN ISO 14692-2:2002/AC:2006
|
| DIN EN ISO 14692-2-2005
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第2部分:合格鉴定和制造
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002
|
| DIN EN ISO 14692-3 Berichtigung 1-2007
| 石油和天然气工业.玻璃纤维增强塑料管.第3部分:系统管道
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002, Corrigenda to DIN EN ISO 14692-3:2005-07; English version EN ISO 14692-3:2002/AC:2006
|
| DIN EN ISO 14692-3-2005
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第3部分:系统设计
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002
|
| DIN EN ISO 14692-4-2005
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第4部分:制造、安装和操作
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002); English version EN ISO 14692-4:2002
|
| DIN EN ISO 14693-2005
| 石油和天然气工业.钻井和油井辅助设备
| Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003); English version EN ISO 14693:2003
|
| DIN EN ISO 14723-2003
| 石油和天然气工业.管道输送系统.海底管道阀
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001
|
| DIN EN ISO 15136-1-2002
| 石油工业和天然气工业用钻孔设备.人工升降机用行进式空腔泵系统.第1部分:泵 (ISO 15136-1:2001); 德文版本
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001); German version EN ISO 15136-1:2001
|
| DIN EN ISO 15138-2003
| 石油和天然气工业.海上生产设备.供热、通风和空调设备
| Petroleum and natural gas industries - Offshore production installation - Heating, ventilation and air-conditioning (ISO 15138:2000 plus Technical Corrigendum 1:2001); German and English version EN ISO 15138:2000 + AC:2002
|
| DIN EN ISO 15156-1 Berichtigung 1-2007
| 石油和天然气工业.在含硫化氢(H2S)环境下的油和气生产中用材料.第1部分:耐裂化材料选择的一般原则
| Petroleum and natural gas industries - Material for use in H2S containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001, Corrigenda to DIN EN ISO 15156-1:2003-05; German and English version EN ISO 15156-1:2001/AC:2006
|
| DIN EN ISO 15156-1-2003
| 石油和天然气工业.石油和天然气生产中用于含H2S环境的材料.第1部分:耐裂材料选用通则
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001
|
| DIN EN ISO 15156-2 Berichtigung 1-2007
| 石油和天然气工业.在含硫化氢(H2S)环境下的油和气生产中用材料.第2部分:耐裂化碳、低合金钢和铸铁的使用
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003); English version EN ISO 15156-2:2003, Corrigenda to DIN EN ISO 15156-2:2005-07; English version EN ISO 15156-2:2003/AC:2006
|
| DIN EN ISO 15156-2-2005
| 石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003); English version EN ISO 15156-2:2003
|
| DIN EN ISO 15156-3 Berichtigung 1-2007
| 石油、石化和天然气工业.在油和气生产中含硫化氢(H2S)环境下用材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2003); English version EN ISO 15156-3:2003, Corrigenda to DIN EN ISO 15156-3:2005-07; English version EN ISO 15156-3:2003/AC:2006
|
| DIN EN ISO 15156-3-2005
| 石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2003); English version EN ISO 15156-3:2003
|
| DIN EN ISO 15403-2007
| 天然气.作为车用压缩燃料天然气的质量指标(ISO 15403-2000)
| Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles (ISO 15403:2000); German version EN ISO 15403:2005
|
| DIN EN ISO 15463-2005
| 石油和天然气工业.新套管、管和平端钻管的现场检验
| Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe (ISO 15463:2003); English version EN ISO 15463:2003
|
| DIN EN ISO 15544-2007
| 石油和天然气工业.近海开采装置.紧急响应的要求和指南
| Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response (ISO 15544:2000); English version EN ISO 15544:2007
|
| DIN EN ISO 15546-2007
| 石油和天然气工业.铝合金钻杆
| Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2007); English version EN ISO 15546:2007
|
| DIN EN ISO 15547-1-2006
| 石油、石化和天然气工业.板式热交换器.第1部分:板框式热交换器(ISO 15547-1-2005).英文版本 EN ISO 15547-1
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers (ISO 15547-1:2005); English version EN ISO 15547-1:2005
|
| DIN EN ISO 15547-2-2006
| 石油、石化和天然气工业.板式热交换器.第2部分:铜焊铝板热交换器(ISO 15547-2-2005).英文版本 EN ISO 15547
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers (ISO 15547-2:2005); English version EN ISO 15547-2:2005
|
| DIN EN ISO 15761-2003
| 石油和天然气工业用规格为DN 100及更小的钢闸阀、球阀和止回阀
| Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text)
|
| DIN EN ISO 16070-2006
| 石油和天然气工业.下井设备.锁芯轴和落地接头
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005); English version EN ISO 16070:2005
|
| DIN EN ISO 16708-2006
| 石油和天然气工业.管道传输系统.基于可靠性的极限状态法（ISO 16708-2006)
| Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods (ISO 16708:2006); English version EN ISO 16708:2006
|
| DIN EN ISO 16812-2007
| 石油、石化和天然气工业.管壳式热交换器
| Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007); English version EN ISO 16812:2007
|
| DIN EN ISO 17078-1-2005
| 石油和天然气工业.钻井和生产设备.第1部分:偏心轴
| Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels (ISO 17078-1:2004); English version EN ISO 17078-1:2004
|
| DIN EN ISO 17776-2003
| 石油和天然气工业.海上开采装置.危险识别和风险评估用方法和技术指南
| Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000); German and English version EN ISO 17776:2002
|
| DIN EN ISO 18453-2006
| 天然气.含水量和水露点的相关性
| Natural gas - Correlation between water content and water dew point (ISO 18453:2004); German version EN ISO 18453:2005
|
| DIN EN ISO 19739-2006
| 天然气.用气相色谱法测定硫化合物的含量(ISO 19739-2004).德文版本EN ISO 19739:2005
| Natural gas - Determination of sulfur compounds using gas chromatography (ISO 19739:2004); German version EN ISO 19739:2005
|
| DIN EN ISO 19900-2005
| 石油和天然气工业.近海建筑物的一般要求
| Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002); English version EN ISO 19900:2002
|
| DIN EN ISO 19901-1-2006
| 石油和天然气工业.海上建筑物的特殊要求.第1部分:Metocean设计和运行研究(ISO 19901-1-2005).英文版本EN IS
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO 19901-1:2005); English version EN ISO 19901-1:2005
|
| DIN EN ISO 19901-2-2005
| 石油和天然气工业.近海建筑物的特殊要求.第2部分:地震设计规程和标准
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2004); English version EN ISO 19901-2:2004
|
| DIN EN ISO 19901-4-2005
| 石油和天然气工业.近海建筑物的特殊要求.第4部分:土工和地基设计考虑
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003); English version EN ISO 19901-4:2003
|
| DIN EN ISO 19901-5-2005
| 石油和天然气工业.近海建筑物的特殊要求.第5部分:设计和施工过程中的重量控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003); English version EN ISO 19901-5:2003
|
| DIN EN ISO 19901-7-2006
| 石油和天然气工业.海上建筑物的特殊要求.第7部分:浮动式海上建筑物和移动式海上设备的定位系统(ISO 19901-7
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO 19901-7:2005); English version EN ISO 19901-7:2005
|
| DIN EN ISO 19903-2007
| 石油和天然气工业.固定混凝土海上平台
| Petroleum and natural gas industries - Fixed concrete offshore structures (ISO 19903:2006); English version EN ISO 19903:2006
|
| DIN EN ISO 19904-1-2007
| 石油天然气工业.浮动式海上结构.第1部分:单体船、半潜式平台与平台
| Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006); English version EN ISO 19904-1:2006
|
| DIN EN ISO 21329-2005
| 石油和天然气工业.管道运输系统.机械连接器的试验过程
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004); English version EN ISO 21329:2004
|
| DIN EN ISO 23251-2007
| 石油、石化和天然气工业.压力释放和降压系统
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2006); English version EN ISO 23251:2007
|
| DIN EN ISO 3977-5-2003
| 燃气轮机.采购.第5部分:石油和天然气工业用燃气轮机
| Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003
|
| DIN EN ISO 6570-2004
| 天然气.烃液潜在含量的测定.重量分析法
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods (ISO 6570:2001); German version EN ISO 6570:2004
|
| DIN EN ISO 6974-1-2002
| 天然气.使用气相色谱法对规定的不确定度组分的测定.第1部分: 剪裁分析指南 (ISO 6974-1:2000); 德文版本 EN
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis (ISO 6974-1:2000); German version EN ISO 6974-1:2001
|
| DIN EN ISO 6974-2-2002
| 天然气.采用气相色谱法对规定的不确定度组分的测定.第2部分:测量系统特性和数据处理统计资料 (ISO 6974-2:2
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data (ISO 6974-2:2001); German version EN ISO 6974-2:2002
|
| DIN EN ISO 6974-3-2002
| 天然气.使用气相色谱法对规定的不确定度组分的测定.第3部分:采用双柱法对氢、氦、氧、氮、二氧化碳和C<指数
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C<(Index)8> using two packed columns (ISO 6974-3:2000); German version EN ISO 6974-3:2001
|
| DIN EN ISO 6974-4-2002
| 天然气.使用气相色谱法对规定的不确定度组分的测定.第4部分:采用双柱法对实验室和在线测量系统的氮、二氧化
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000); German version EN ISO 6974-4:2001
|
| DIN EN ISO 6974-5-2002
| 天然气.使用气相色谱法对规定的不确定度组分的测定.第5部分:使用三柱法对实验室和在线过程应用的氮、二氧化
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line process application using three columns (ISO 6974-5:2000); German version EN ISO 6974-5:2001
|
| DIN EN ISO 6974-6-2005
| 天然气.用气相色谱法测定规定了不确定度的组分.第6部分:用三个毛细管柱测定氢、氦、氧、氮、二氧化碳和C1到
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C<(Index)1> to C<(Index)8> hydrocarbons using three capillary columns (ISO 6974-6:2002); German version EN ISO 6974-6:2005
|
| DIN EN ISO 6975-2005
| 天然气.延伸分析.气相色谱法
| Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997); German version EN ISO 6975:2005
|
| DIN EN ISO 6978-1-2005
| 天然气.汞的测定.第1部分:用碘化学吸附法对汞的采样
| Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine (ISO 6978-1:2003); German version EN ISO 6978-1:2005
|
| DIN EN ISO 6978-2-2005
| 天然气.汞的测定.第2部分:用金/铂合金混汞法对汞的采样
| Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy (ISO 6978-2:2003); German version EN ISO 6978-2:2005
|
| 编号 | 中文名称 | 英文名称 |
|---|