| 编号 | 中文名称 | 英文名称 |
|---|
| BS 1083-1965
| 精密六角螺拴、螺钉与螺母(B.S.W和B.S.F 螺纹)规范
| Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)
|
| BS 1127-1-1990
| 螺丝板牙和螺母状板牙.第1部分:手用和机用圆形螺丝板牙和手用板牙柄规范
| Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies and hand-operated die stocks
|
| BS 1127-2-1990
| 螺丝板牙和螺母状板牙.手用和机用锥形管螺纹用圆形螺丝板牙规范;R系列
| Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies for taper pipe threads; R Series
|
| BS 1127-3-1990
| 螺丝板牙和螺母状板牙.手用和机器操作平行管螺纹用圆形螺丝板牙规范;G系列
| Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies for parallel pipe threads; G series
|
| BS 1127-4-1990
| 螺丝板牙和螺母状板牙.圆形螺丝板牙术语
| Screwing dies and dienuts - Terminology for circular screwing dies
|
| BS 1127-5-1990
| 螺丝板牙和螺母状板牙.六角形螺母状板牙尺寸规范
| Screwing dies and dienuts - Specification for dimensions of hexagon dienuts
|
| BS 1768-1963
| 统一精密六角头螺栓、螺钉和螺母(UNC与UNF螺纹)规范.标准系列
| Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads) - Normal series
|
| BS 1981-1991
| 统一机用螺钉与机用螺母规范
| Specification for unified machine screws and machine screw nuts
|
| BS 2485-1987
| T形槽、T形螺栓、T形螺母与榫舌规范
| Specification for tee slots, tee bolts, tee nuts and tenons
|
| BS 2827-1957
| 机用压制螺母(Ｂ.Ａ与惠氏螺纹)规范
| Specification for machine screw nuts, pressed type (B.A. and Whitworth form threads)
|
| BS 2A 110-1962
| 飞行器用抗剪钢螺栓的钢制螺母(统一六角形和统一螺纹)规范
| Specification for steel nuts (Unified hexagons and Unified threads) for shear bolts for aircraft
|
| BS 2A 122, 2A 123, 2A 124-1981
| 飞行器用防松螺母(统一螺纹)规范
| Specification for clinch nuts (Unified threads) for aircraft
|
| BS 2A 122-1981
| 飞行器用压扁螺母(统一螺纹)规范
| Specification for clinch nuts (Unified threads) for aircraft
|
| BS 2A 204, 2A 206 [...]-1963
| 航空用<1/4>英寸以下的机器螺钉和螺母(统一螺纹)规范
| Specifications for machine screws and nuts (Unified threads) below <1/4> inch for aeronautical purposes
|
| BS 2A 204, 2A 206, 2A 208 and A 217 to A 225-1963
| 航空用1/4英寸以下的设备螺钉和螺母(统一螺纹)规范
| Specifications for machine screws and nuts (Unified threads) below <1/4> inch for aeronautical purposes
|
| BS 2A 204-1963
| 航空用小于1/4英寸的机器螺钉和螺母(统一螺纹)规范
| Specifications for machine screws and nuts (Unified threads) below 1/4 inch for aeronautical purposes
|
| BS 2A 210-1962
| 飞行器用黄铜螺母(统一六角形和统一螺纹)规范
| Specification for brass nuts (Unified hexagons and Unified threads) for aircraft
|
| BS 2A 24-1962
| 飞行器用抗蚀钢六角螺母(B.A和B.S.F螺纹)(普通形、薄形、槽形、槽顶形)规范
| Specification for corrosion-resisting steel hexagonal nuts (B.A and B.S.F. threads) (ordinary, thin, slotted and castle) for aircraft
|
| BS 2A 27-1962
| 飞行器用钢制六角螺母(B.A和B.S.F螺纹)(普通形.薄形.槽形和槽顶形)规范
| Specification for steel hexagonal nuts (B.A. and B.S.F threads) (ordinary, thin, slotted and castle) for aircraft
|
| BS 2A 29-1962
| 飞行器用铝合金六角螺母(B.A和B.S.F螺纹)(普通和开槽的)规范
| Specification for aluminium alloy hexagonal nuts (B.A and B.S.F. threads) (ordinary and slotted) for aircraft
|
| BS 2A 293-2005
| 带有非金属锁紧元件的自锁螺母的采购.米制系列.规格
| Procurement of self-locking nuts with non-metallic locking elements - Metric series - Specification
|
| BS 2A 295-2000
| 最大工作温度低于或等于425℃的自锁螺母.试验方法
| Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C - Test methods
|
| BS 2A 302-2000
| 最大工作温度低于或等于425℃的自锁螺母.采购规范
| Nuts, self-locking, with maximum operating temperatures less than or equal to 425 °C - Procurement specification
|
| BS 2A 58-1962
| 飞行器用抗剪螺栓的钢制六角头螺母(B.S.F螺纹)规范
| Specification for steel hexagonal nuts (B.S.F. threads) for shear bolts for aircraft
|
| BS 2L 87-1971
| 用于制造螺母、联轴节和机加工中空零部件的铝-铜(4.4)-镁(0.5)-硅(0.7)-锰(0.8)合金六角棒材规范(固溶处理
| Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
|
| BS 2S 112-1964
| 飞机材料规范.易切削碳素钢、光亮冷拔棒(40-50吨力/平方英寸;最大直径或最小断面尺寸1/2英寸)(主要用于制造
| Specification for aircraft material - Semi-free cutting carbon steel, bright bars for machining (40-50 tonf/sq in: maximum size 1/2 inch diameter or minor sectional dimension) (primarily intended for the manufacture of nuts)
|
| BS 2S 113-1964
| 飞机材料规范.机械制造用40号碳素钢光亮冷拔棒(45-55吨力/平方英寸;限定等圆断面1英寸)(主要用于制造螺母)
| Specification for aircraft material - '40' carbon steel bright bars for machining (45-55 tonf/sq in: limiting ruling section 1 inch) (primarily intended for the manufacture of nuts)
|
| BS 2S 147-1976
| 锻制螺栓、螺母用的含0.5%镍-铬-钼钢棒规范
| Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
|
| BS 2S 149-1976
| 锻制螺栓、螺母用的含1.75%镍-铬-钼钢棒规范
| Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
|
| BS 3692-2001
| ISO 米制精密六角螺拴、螺钉和螺母规范
| ISO metric precision hexagon bolts, screws and nuts - Specification
|
| BS 3A 103-1962
| 飞行器用钢螺母(统一六角形、统一螺纹)(普通形、薄形、槽形和槽顶形)规范
| Specification for steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft
|
| BS 3A 105-1962
| 飞行器用耐蚀钢螺母(统一六角形、统一螺纹)(普通形、薄形、槽形和槽顶形)规范
| Specification for corrosion-resisting steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft
|
| BS 3A 107-1962
| 飞行器用铝合金螺母(统一六角形和统一螺纹)(普通和开槽的)规范
| Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft
|
| BS 3A 125 to 3A 132, 3A 136 to 3A 143, 3A 147 to 3A 168, 3A 180, 3A 181, 3A 186, 3A 187, 3A 192, 3A
| 航天器用系紧螺母(统一螺纹)规范
| Specification for stiffnuts (Unified threads) for aircraft
|
| BS 3A 125 to 3A 132-1981
| 飞行器用刚性螺母(统一螺纹)规范
| Specification for stiffnuts (Unified threads) for aircraft
|
| BS 4183-1967
| 机用螺钉和螺母规范.米制系列
| Specification for machine screws and machine screw nuts - Metric series
|
| BS 4185-1-1967
| 机床零件.第1部分:防松螺母("c"型,凹头紧固螺钉锁紧)
| Machine tool components - Locknuts ('C' type, socket set screw locking)
|
| BS 4185-9-1976
| 机床零件.第9部分:整平螺钉、螺母及基座板
| Specification - Machine tool components - Levelling screws, nuts and seating plates
|
| BS 4190-2001
| ISO 米制的粗制六角螺拴、螺钉和螺母规范
| ISO metric black hexagon bolts, screws and nuts - Specification
|
| BS 450-1958
| 机用螺钉与机用螺母(B.S.W和 B.S.F螺纹)规范
| Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)
|
| BS 4790-1987
| 小点火源对铺地织物的影响的测定方法(热金属螺母法)
| Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)
|
| BS 4929-1-1973
| 常作用扭矩式钢质六角螺母规范.第1部分:米制尺寸
| Specification for steel hexagon prevailing-torque type nuts - Metric series
|
| BS 4929-2-1973
| 常扭矩式钢质六角螺母规范.第2部分:统一英制系列
| Specification for steel hexagon prevailing-torque type nuts - Unified (inch) series
|
| BS 4933-1973
| ISO 米制粗制帽罩头和沉头螺拴、螺钉和六角螺母规范
| Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
|
| BS 4A 100-2003
| 航空航天系列.抗拉强度不超过1249MPa的螺栓和空转螺母的一般要求规范
| Aerospace series - Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
|
| BS 6040-1981
| 螺栓、螺钉、螺母和附件的名命
| Nomenclature for bolts, screws, nuts and accessories
|
| BS 6101-6-1990
| 机床滚珠丝杠.第6部分:丝杠用球状螺母和基本尺寸规范
| Machine tool ball screws - Specification for ball nuts and principal dimensions of ball screws
|
| BS 6356-13-1997
| 农作物保护喷雾设备.第13部分:气动喷雾器:喷嘴旋轴螺母尺寸
| Spraying equipment for crop protection - Air-assisted sprayers - Dimensions of nozzle swivel nuts
|
| BS 64-1992
| 铁路鱼尾板用的标准和高强度钢螺栓和螺母规范
| Specification for normal and high strength steel bolts and nuts for railway rail fishplates
|
| BS 6416-1983
| 螺钉与螺母装配工具术语
| Nomenclature for assembly tools for screws and nuts
|
| BS 7644-2-1993
| 直接拉力指示器.螺母面和螺栓面垫圈规范
| Direct tension indicators - Specification for nut face and bolt face washers
|
| BS 7670-1-1993
| 电阻凸焊用钢螺母和螺栓.第1部分:尺寸和性能规范
| Steel nuts and bolts for resistance projection welding - Specification for dimensions and properties
|
| BS 7670-2-1997
| 电阻凸焊的钢螺母和螺栓.焊接螺母和螺栓的焊接规范
| Steel nuts and bolts for resistance projection welding - Specification for welding of weld nuts and weld bolts
|
| BS 7764-1994
| 六角形开槽螺母和槽顶螺母规范
| Specification for hexagon slotted nuts and castle nuts
|
| BS 7786-2006
| 航空航天系列.MoS2润滑的耐热钢制自锁六角螺母.等级1100 MPa (环境温度)315℃
| Specification for unsintered PTFE tapes for general use
|
| BS 856-1969
| 翼形螺母规范
| Specification for wing nuts
|
| BS A 233-236-1971
| 普通六角薄螺母(3B类,UNF螺纹)规范
| Specification for plain hexagonal thin nut (of Class 3B UNJ thread)
|
| BS A 237-240-1971
| 普通六角螺母(3B类,UNF螺纹)规范
| Specification for plain hexagonal nut (of Class 3B UNJ thread)
|
| BS A 242, A 243, A 244, A 245-1974
| 六角形槽顶螺母规范（3B级 UNJ螺纹）
| Specification for hexagonal castle nuts (of Class 3B UNJ thread)
|
| BS A 242-1974
| 六角槽顶螺母(3B类UNF螺纹)规范
| Specification for hexagonal castle nuts (of Class 3B UNJ thread)
|
| BS A 246, A 247, A 248, A 249-1974
| 六角形开槽厚螺母规范(3B级 UNJ螺纹)
| Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread)
|
| BS A 246-1974
| 一字槽六角厚型螺母(3B类UNF螺纹)规范
| Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread)
|
| BS A 250, A 251, A 252, A 253-1974
| 六角形开槽抗剪螺母规范(3B级 UNJ螺纹)
| Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)
|
| BS A 250-1974
| 一字槽六角抗剪螺母(3B类UNF螺纹)规范
| Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)
|
| BS A 275, A 276 [...]-1981
| 带非金属锁紧垫片的六角自锁螺母规范.米制系列
| Specification for hexagon self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 275, A 276, A 277, A 278, A 279, A 280-1981
| 带非金属锁紧插件的六角头自锁螺母规范.公制系列
| Specification for hexagon self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 275-1981
| 具有非金属锁紧片的六角自锁螺母规范.公制系列
| Specification for hexagon self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 281, A 282 [...]-1981
| 带非金属锁紧垫片的(薄)六角自锁螺母规范.米制系列
| Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 281, A 282, A 283, A 284, A 285, A 286-1981
| 带非金属锁紧插件的六角头(薄)自锁螺母规范.公制系列
| Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 281-1981
| 具有非金属锁紧片的六角(薄型)自锁螺母规范.公制系列
| Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts - Metric series
|
| BS A 298-1988
| 最大工作温度大于425℃的自锁螺母的试验方法
| Methods of test for self-locking nuts with maximum operating temperature greater than 425 °C
|
| BS A 31-54-1951
| 航空用英国协会低抗拉强度螺钉和螺母规范
| Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes
|
| BS A 314-1997
| 航空航天.带MJ螺纹的高度降低和标准交叉平面的平六角头螺母分类:450 MPa(室温)/120℃、450 MPa(室温)/235℃
| Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/650 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/730 °C and 1250 MPa (at ambient temperature)/600 °C - Dimension"
|
| BS A 315-1997
| 航空航天.带MJ螺纹的高度降低和标称交叉平面的有槽(齿形)六角头螺母分类:450MPa(室温)/120℃、450MPa(室温)
| Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/650 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/730 °C and 1250 MPa (at ambient temperature)/60"
|
| BS A 316-1997
| 带MJ螺纹的标称高度和标称交叉平面的有槽(槽顶)六角头螺母分类:600MPa(室温)/120℃、600MPa(室温)/235℃、9
| Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications - 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/730 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient temperature)/600 °C - Di"
|
| BS A 317-1997
| 带MJ螺纹的标称高度和标称交叉平面的平六角头螺母分类:600MPa(室温)/120℃、600MPa(室温)/235℃、900MPa(室
| Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications - 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/730 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient temperature)/600 °C - Dimensions
|
| BS A 318-1997
| 带MJ螺纹的高度降低和减缩交叉平面的有槽(槽顶)六角头螺母分类:450MPa(室温)/425℃、600MPa(室温)/235℃、6
| Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications - 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa (at ambient temperature)/650 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/730 °C and 1100 MPa (at ambient temperature)/600 °C - Dimensions
|
| BS A 319-1997
| 带MJ螺纹的高度降低和减缩交叉平面的平六角头螺母分类:400MPa(室温)/425℃、600MPa(室温)/235℃、600MPa(室
| Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa (at ambient temperature)/650 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/730 °C and 1100 MPa (at ambient temperature)/600 °C - Dimensions
|
| BS A 320-1997
| 双耳浮动自锁紧自调整MJ螺纹固定螺母分类:900MPa(室温)/235℃、900MPa(室温)/315℃、900MPa(室温)/425℃.尺
| Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 321-1997
| 单耳浮动自锁紧自调整MJ螺纹固定螺母分类:900MPa(室温)/235℃、900MPa(室温)/315℃、900MPa(室温)/425℃.尺
| Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 324-1998
| 自锁紧十二角MJ螺纹分类螺母:1100MPa(室温)/425℃、1100MPa(室温)/650°C、1210MPa(室温)/425°C、1210MPa(
| Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at ambient temperature)/235 °C, 1550 MPa (at ambient temperature)/425 °C and 1550 MPa (at ambient temperature)/600 °C - Dimensions
|
| BS A 327-1998
| 自锁紧十二角埋头孔MJ螺纹分类螺母:1100MPa(室温)/425℃、1100MPa(室温)/650°C、1210MPa(室温)/425°C、12
| Nuts, bihexagonal, self-locking, with counterbore and MJ threads , classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at ambient temperature)/235 °C, 1550 MPa (at ambient temperature)/425 °C and 1550 MPa (at ambient temperature)/600 °C - Dimensions
|
| BS A 329-1999
| MJ螺纹的承窝安装的单耳固定自锁托板螺母.等级:1100MPa(室温)/235℃、 1100MPa(室温)/315℃和1100MPa(室温)
| Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 330-1999
| MJ螺纹的增大承窝安装的双耳游动自锁托板螺母.等级:900MPa(室温)/235℃、900MPa(室温)/315℃、900MPa(室温)
| Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 333-1999
| MJ螺纹的承窝安装的双耳游动自锁托板螺母.等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和1100MPa(室温)/
| Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 334-1999
| MJ螺纹的承窝安装的90°倒角固定自锁托板螺母.等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和1100MPa(室
| Nuts, anchor, self-locking, fixed, 90 ° corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 335-1999
| MJ螺纹的承窝安装的小尺寸系列封闭倒角固定自锁托板螺母.等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和
| Nuts, anchor, self-locking, fixed, closed corner, reduced series , with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 336-1999
| MJ螺纹的承窝安装的双耳固定自锁托板螺母.等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和1100MPa(室温)/
| Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 337-1999
| MJ螺纹的承窝安装的单耳游动自锁托板螺母.等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和1100MPa(室温)/
| Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 338-1999
| MJ螺纹的承窝安装的小尺寸系列双耳固定自锁托板螺母.等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和1100
| Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 339-1999
| MJ螺纹的承窝安装的小尺寸系列双耳游动自锁托板螺母..等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和110
| Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 340-1999
| MJ螺纹的承窝安装的小尺寸系列90°倒角固定自锁托板螺母.等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和
| Nuts, anchor, self-locking, fixed, 90 ° corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 342-1999
| 普通或带槽(槽顶)螺母.采购规格
| Nuts, plain or slotted (castellated) - Procurement specification
|
| BS A 343-1999
| 普通或开槽（槽顶）螺母.试验方法
| Nuts, plain or slotted (castellated) - Test methods
|
| BS A 344-1999
| MJ螺纹的承窝安装的小尺寸系列单耳固定自锁托板螺母.等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和1100
| Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperatures)/235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 345-1999
| MJ螺纹的承窝安装和带强制锁紧垫圈的自锁六角螺母.等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和1100MP
| Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/425 °C - Dimensions
|
| BS A 353-2000
| 涂覆或未涂覆的金属材料制的MJ螺纹游动自锁螺母的衬套.尺寸
| Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions
|
| BS A 358-2-2000
| MJ螺纹.螺栓和螺母的极限尺寸
| MJ threads - Limit dimensions for bolts and nuts
|
| BS A 359-2000
| MJ螺纹游动自锁圆筒形螺母.等级:900MPa(室温)/235℃、1100MPa(室温)/235℃、1250MPa(室温)/235℃和1550MPa(
| Nuts, barrel, self-locking, floating, with MJ threads, classifications - 900 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/235 °C, 1250 MPa (at ambient temperature)/235 °C, 1550 MPa (at ambient temperature)/235 °C - Dimensions
|
| BS A 360-2000
| 筒形自锁螺母用金属薄板弹簧承座.尺寸
| Retainers, spring, sheet metal, for self-locking barrel nuts - Dimensions
|
| BS AU 50-2.3-1994
| 轮胎和车轮.第2部分:车轮和轮辋.第3节:商用车辆的道路车轮螺母、双头螺栓和螺栓规范
| Tyres and wheels - Wheels and rims - Specification for road-wheel nuts, studs and bolts for commercial vehicles
|
| BS EN 14218-2003
| 六角法兰面螺母.细牙螺纹
| Hexagon nuts with flange - Fine pitch thread
|
| BS EN 14399-3-2005
| 预加负荷用高强度结构螺栓组件.系统HR.六角螺栓和螺母组件
| High-strength structural bolting for preloading - System HR - Hexagon bolt and nut assemblies
|
| BS EN 14399-4-2005
| 预负载用高强度结构螺栓连接组件.系统HV.六螺栓和螺母组件
| High-strength structural bolting assemblies for preloading - System HV - Hexagon bolt and nut assemblies
|
| BS EN 1661-1998
| 带法兰的六角螺母
| Hexagon nuts with flange
|
| BS EN 1663-1998
| 带法兰(非金属嵌入件)的流行扭矩型六角螺母
| Prevailing torque type hexagon nuts with flange (with non-metallic insert)
|
| BS EN 1664-1998
| 带法兰的流行扭矩型全金属六角螺母
| Prevailing torque type all-metal hexagon nuts with flange
|
| BS EN 1666-1998
| 带公制小螺距螺纹法兰(非金属嵌入件)的流行扭矩型六角螺母
| Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread
|
| BS EN 1667-1998
| 带公制小螺距螺纹法兰的流行全金属扭矩型六角螺母
| Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
|
| BS EN 20225-1992
| 紧固件.螺栓、螺柱和螺母.图形符号和尺寸
| Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions
|
| BS EN 20898-2-1994
| 紧固件机械性能.第2部分:有规定检验载荷值的螺母.粗牙螺纹
| Mechanical properties of fasteners - Nuts with specified proof load values - Coarse thread
|
| BS EN 2264-1996
| 二硫化钼润滑的镀镉合金钢加大承窝安装的双耳浮动自锁托板螺母.等级:900MPa(室温)/235℃
| Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated MoS2 lubricated - Classification: 900 MPa (at ambient temperature) /235 °C
|
| BS EN 2680-2006
| 航空航天系列.MoS2润滑镉镀层铝合金双耳游动自调自锁托板螺母.等级:900MPa(室温)/235℃
| Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C
|
| BS EN 2752-1990
| 带承窝的小尺寸系列的双耳固定自锁托板螺母规范.分类:1100MPa/235℃
| Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore - Classification: 1100 MPa/235 °C
|
| BS EN 2753-1996
| 二硫化钼润滑的镀镉合金钢的承窝安装的单耳固定自锁托板螺母.等级:1100MPa(室温)/235℃
| Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification - 1100 MPa (at ambient temperature) / 235 °C
|
| BS EN 2754-2006
| 航空航天系列.沉头不固定双耳自锁防松螺母.分类:1100 MPa/235℃
| Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1100 MPa/235 °C
|
| BS EN 2809-2001
| 航空航天系列.镀银的耐热钢制公称对边底高度的开槽/槽顶六角螺母.分级.900MPa(室温)/650℃
| Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification - 900 MPa (at ambient temperature)/650 °C
|
| BS EN 2810-2001
| 航空航天系列.钝化处理的耐热钢制标准对边低高度的开槽/槽顶六角螺母.等级:900MPa(室温)/650℃
| Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 °C
|
| BS EN 2881-2006
| 航空航天系列.耐蚀钢制钝化MoS2润滑双耳游动沉孔密封耐燃料性自锁托板螺母.等级:900MPa(室温)/120℃
| Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 120 °C
|
| BS EN 2882-2006
| 航空航天系列.MoS2润滑的镉厚板钢制沉头自锁六角螺母和附属垫圈.等级1100 MPa (环境温度)235℃
| Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 235℃
|
| BS EN 28839-1992
| 紧固件机械性能.有色金属制螺栓、螺钉、螺柱和螺母
| Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals
|
| BS EN 2906-1994
| FE-PA92HT(A 286)耐热钢双六角头自锁螺母.等级:1100MPa(室温)/650℃
| Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 2907-1996
| 镀银的FE-PA92HT(A286)耐热钢双六角头自锁螺母.等级:1100MPa(室温)/650℃
| Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa (at ambient temperature)/650 °C
|
| BS EN 2908-1994
| FE-PA92HT(A286)耐热钢深承窝双六角头自锁螺母.等级:1100MPa(室温)/650℃
| Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 2909-1995
| 镀银的FE-PA92HT(A286)耐热钢制的深承窝的双六角头自锁螺母.等级:1100MPa(室温)/650C°
| Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 2910-1994
| FE-PA92HT(A286)耐热钢制自锁螺母.等级:1100MPa(室温)/650℃
| Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 2911-1995
| 镀银的FE-PA92HT(A286)耐热钢制的自锁杆螺母.等级:1100MPa(室温)/650℃
| Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 2997-004-2006
| 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard
|
| BS EN 2997-006-2006
| 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
|
| BS EN 3004-1997
| FE-PA2601(A286)耐热钢制MJ螺纹自锁螺母.等级:1100 MPa(室温)/650℃.技术规范
| Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C - Technical specification
|
| BS EN 3005-2005
| 航空航天系列.自锁紧、MJ螺纹、NI-PH1302耐热镍基合金(沃斯帕洛尹合金)制镀银或不镀银螺母.等级:1210MPa (
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature) / 730 °C - Technical specification
|
| BS EN 3012-1996
| 耐热镍基合金HI-P101HT(沃斯帕洛尹合金)双六角头自锁螺母.等级:1210 MPa(室温)/730℃
| Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C
|
| BS EN 3013-1996
| 镀银的耐热镍基合金HI-P101HT(沃斯帕洛尹合金)双六角头自锁螺母.等级:1210 MPa(室温)/730℃
| Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C
|
| BS EN 3014-2001
| 航空航天系列.FE-PA2601(A286)耐热钢制锯齿形自锁带柄螺母.等级:1100MPa(室温)/650℃
| Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 3015-2001
| 航空航天系列.镀银的FE-PA2601(A286)耐热钢制锯齿形自锁紧带柄螺母.等级:1100MPa(室温)/650℃
| Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C
|
| BS EN 3064-1996
| 细齿形的螺杆自锁螺母.安装程序
| Shank nuts, self-locking, serrated - Installation procedure
|
| BS EN 3065-1996
| 细齿螺杆自锁螺母的安装孔.设计标准
| Installation holes for self-locking, serrated shank nuts - Design standard
|
| BS EN 3080-2006
| 钛合金8°30'管连接件.带止推金属丝螺母的缩短三通
| Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut
|
| BS EN 3149-1997
| 杆螺母 60度型锻法兰安装孔.设计标准
| Shank nuts - Installation holes, 60 ° swage, flanges - Design standard
|
| BS EN 3152-2005
| 航空航天系列.自锁紧、MJ螺纹、FE-PA2601(A286)耐热钢制镀银或不镀银螺母.分类:1100MPa (环境温度下)/425
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated - Classification: 1100 MPa (at ambient temperature)/425 °C - Technical specification
|
| BS EN 3196-1994
| 镀银的FE-PA92HT(A286)耐热钢六角自锁螺母.等级:1100 MPa(室温)/425℃
| Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3230-2001
| 航空航天系列.镀镉的钢制标准对边低高度的开槽/槽顶六角螺母.等级:900MPa(室温)/235℃
| Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classificaiton: 900 MPa (at ambient temperature)/235 °C
|
| BS EN 3239-1996
| HI-P101HT型耐热镍基合金(沃斯帕洛尹合金)制螺纹镀银的自锁十二角头螺母.等级:1210 MPa(室温)/730℃型
| Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/730 °C
|
| BS EN 3264-2001
| 航空航天系列.钛合金8°30管连接件’.止推金属丝螺母
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Thrust wire nut
|
| BS EN 3266-2001
| 航空航天系列.钛合金管连接件.闷头螺母
| Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut
|
| BS EN 3299-2007
| 航空航天系列.镀银、右或左旋MJ螺纹、自锁紧、FE-PA2601(A286)耐热钢轴螺母和螺环.技术规范
| Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
|
| BS EN 3372-009-2007
| 航空航天系列.工作温度在-65°C到175°C或200°C连续温度下、带卡口连接的、防碰擦、中和高接触密度、圆形
| Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, jam nut mounting - Product standard
|
| BS EN 3377-1996
| 耐热钢FE-PA92HT(A286)制自锁六角螺母.等级:1100 MPa(室温)/425℃
| Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3536-2006
| 航空航天系列.MoS2润滑的耐热钢制自锁紧六角螺母.分类:1100 MPa(环境温度)/315℃
| Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C
|
| BS EN 3645-009-2006
| 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第009部分:防松螺母安装圆
| Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 009: Receptacle, round flange, jam nut mounting — Product standard
|
| BS EN 3645-010-2006
| 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第010部分:防松螺母安装圆
| Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 010: Receptacle, hermetic, round flange, jam nut mounting — Product standard
|
| BS EN 3646-004-2006
| 航空航天系列.175℃～200℃工作温度圆形卡口耦合电连器.第004部分:锁紧螺母安装密封插件.产品标准
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 004: Receptacle, jam-nut mounting - Product standard
|
| BS EN 3646-006-2006
| 航空航天系列.175℃～200℃工作温度圆形卡口耦合电器连器.第006部分:锁紧螺母安装密封插座.产品标准
| Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 006: Receptacle, hermetic jam-nut mounting - Product standard
|
| BS EN 3660-003-2006
| 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.EN 2997和EN 4067中A型不穿孔螺母的产品标准
| Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067: Product standard |
| BS EN 3720-1995
| 二硫化钼涂覆的耐热钢FE-PA92HT(A286)制自锁双六角头螺母.等级:1100 MPa(室温)/425℃
| Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3721-1995
| 二硫化钼涂覆的FE-PA92HT(A286)耐热钢制的深承窝的双六角头自锁螺母.等级:1100 MPa(室温)/425℃
| Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT (A 286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3722-1995
| 二硫化钼涂覆的FE-PA92HT(A286)耐热钢制的自锁杆螺母.等级:1100 MPa(室温)/425℃
| Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3723-1996
| 二硫化钼涂覆的FE-PA92HT(A286)型耐热钢制自锁六角头螺母.等级:1100 MPa(室温)/425℃
| Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3726-2005
| 航空航天系列.耐热钢FE-PA2601 (A286)制MoS2涂覆的自锁夹紧螺母.等级: 1100 MPa(室温)/425 鳦
| Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C
|
| BS EN 3741-2005
| 航空航天系列.米制夹紧螺母.安装孔和组件
| Aerospace series - Nuts, clip, metric - Installation holes and assembly
|
| BS EN 3752-2005
| 航空航天系列.耐热钢FE-PA2601(A286)制MoS2涂覆的自锁MJ螺纹螺母.等级: 1100 MPa(室温)/425 鳦.技术规范
| Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature) / 425 °C - Technical specification
|
| BS EN 3856-2002
| 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.止推金属线用转动螺母
| Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire
|
| BS EN 4011-2005
| 航空航天系列.十二角头自锁紧的镀银耐热镍基合金NI-PH2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/600 鳦
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C
|
| BS EN 4012-2004
| 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制MoS2涂覆的自锁紧双六角头螺母.等级:1550MPa(室温)/4
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C
|
| BS EN 4013-2005
| 航空航天系列.自锁紧镀银耐热镍基合金NI-PH2601(铬镍铁合金718)制带柄螺母.等级:1550MPa(室温)/600 鳦
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4018-2001
| 航空航天系列.钛合金管连接件8°30'.带止推金属丝螺母的90°弯头
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° with thrust wire nut
|
| BS EN 4020-2001
| 航空航天系列.钛合金8°30'管连接件.带止推金属丝螺母(thrust wire nut)的90°弯头焊接端
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, welded end with thrust wire nut
|
| BS EN 4024-2001
| 航空航天系列.钛合金管连接件8°30'.带止推金属丝螺母的45°弯头焊接端头
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° welded end with thrust wire nut
|
| BS EN 4027-2001
| 航空航天系列.钛合金管连接件8°30'.带止推金属丝螺母的三通管分支
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees branch with thrust wire nut
|
| BS EN 4028-2001
| 航空航天系列.钛合金管连接件8°30'.在使用的带止推金属丝螺母的三通管
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees with thrust wire nut on run
|
| BS EN 4031-2001
| 航空航天系列.钛合金管连接件8°30'.焊接活接头用螺母
| Aerospace series - Pipe coupling 8 °30' in titanium alloy - Nut for welded union
|
| BS EN 4047-2004
| 航空航天系列.自锁紧MJ螺纹镀银耐热镍基合金NI-PH2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/600 鳦.技术
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550MPa (at ambient temperature)/600 °C - Technical specification
|
| BS EN 4048-2004
| 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制MoS2涂覆的自锁、带MJ螺纹的螺母.等级:1550MPa(室温)
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C - Technical specification
|
| BS EN 4069-1996
| 钝化处理的耐热钢小尺寸对边低高度普通六角头螺母.等级:600 MPa(室温)/650℃
| Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600MPa (at ambient temperature)/650 °C
|
| BS EN 4116-2004
| 航空航天系列.耐热钢FE-PA2601 (A286)制自锁、带镀银螺纹的六角螺母.等级:1100MPa(室温)/425℃
| Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature) / 425 °C
|
| BS EN 4117-2004
| 航空航天系列.十二角头自锁紧螺纹镀银的耐热镍基合金NI-PH 2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/60
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4118-2004
| 航空航天系列.耐热钢FE-PA2601(A286)制自锁、带镀银螺纹的十二角螺母.等级:1100MPa(室温)/650℃
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature) / 650 °C
|
| BS EN 4119-2004
| 航空航天系列.耐热钢FE-PA2601(A286)制自锁、深沉头孔的、带镀银螺纹的十二角螺母.等级:1100MPa(室温)/650
| Aerospace series - Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature) / 650 °C
|
| BS EN 4120-2004
| 十二角、自锁紧、NI-PH1302耐热镍基合金(沃斯帕洛尹合金)、螺纹镀银的螺母.分类:1210MPa(环境温度下)/730
| Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread - Classification - 1 210 MPa (at ambient temperature) / 730 °C
|
| BS EN 4121-2004
| 航空航天系列.耐热钢FE-A2601(A286)制自锁、锯齿、带镀银螺纹的有柄螺母.等级:1100MPa(室温)/650℃
| Aerospace series - Shank nuts, serrated, self-locking, in heat resisting steel FE- A2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) /650 °C
|
| BS EN 4122-2004
| 航空航天系列.耐热钢FE-PA2601(A286)制自锁、带镀银螺纹的有柄螺母.等级:1100MPa(室温)/650℃
| Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature)/650 °C
|
| BS EN 4123-2004
| 航空航天系列.自锁紧螺纹镀银的耐热镍基合金NI-PH 2601(铬镍铁合金718)带柄螺母.等级:1550MPa(室温)/600 鳦
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4124-2004
| 航空航天系列.60 型模用自锁紧螺纹镀银的耐热镍基合金NI-PH1302(一种耐高热镍基合金)带柄螺母.等级:1210MP
| Aerospace series - Shank nuts, self-locking, heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60 ° swage - Classification - 1 210 MPa (at ambient temperature) / 730 °C
|
| BS EN 4590-2005
| 航空航天系列.耐腐蚀钢制钝化、自锁盘头螺母用金属片弹簧固定器
| Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated
|
| BS EN 4591-2005
| 航空航天.耐高温镍基合金钢制MOS2润滑的自调准筒形游动自锁螺母.等级为:1550 MPa (环境温度) / 315 °C
| Aerospace series - Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS2 lubricated - Classification: 15 50 MPa (at ambient temperature) / 315 °C
|
| BS EN 4610-2005
| 航空航天系列.8°30'钛合金管接头.带推进线螺母的45°弯头
| Pipe coupling 8°30' in titanium alloy — Elbows 45°, with thrust wire nut
|
| BS EN ISO 10484-1997
| 螺母的扩孔试验
| Widening test on nuts
|
| BS EN ISO 10485-2004
| 螺母锥形保证载荷试验
| Cone proof load test on nuts
|
| BS EN ISO 10511-1998
| 通用扭矩型六角薄螺母(用非金属垫圈)
| Prevailing torque type hexagon thin nuts (with non-metallic insert)
|
| BS EN ISO 10512-1998
| 带米制细牙螺纹的1型常用扭矩型六角螺母(带有非金属插入物).性能等级6、8和10
| Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10
|
| BS EN ISO 10513-1998
| 带米制细牙螺纹的2型常用扭矩型六角螺母.性能等级8、10和12
| Prevailing torque type all-metal hexagon nut, style 2, with metric fine pitch thread - Property classes 8, 10 and 12
|
| BS EN ISO 21670-2003
| 法兰六角焊接螺母
| Hexagon weld nuts with flange
|
| BS EN ISO 2320-1998
| 常用扭矩式钢质六角螺母.机械和性能要求
| Prevailing torque type steel hexagon nuts - Mechanical and performance requirements
|
| BS EN ISO 3506-2-1998
| 耐腐蚀不锈钢紧固件的机械特性.螺母
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Nuts
|
| BS EN ISO 4032-2001
| 六角头螺母.1型.产品等级A和B
| Hexagon nuts, style 1. Product grades A and B
|
| BS EN ISO 4033-2001
| 六角头螺母.2型.产品等级A和B
| Hexagon nuts, style 2. Product grades A and B
|
| BS EN ISO 4034-2001
| 六角头螺母.产品等级C级
| Hexagon nuts - Product grade C
|
| BS EN ISO 4035-2001
| 六角头薄螺母(倒角).产品等级A和B级
| Hexagon thin nuts (chamfered) - Product grades A and B
|
| BS EN ISO 4036-2001
| 六角头薄螺母(无倒角).产品等级B级
| Hexagon thin nuts (unchamfered) - Product grade B
|
| BS EN ISO 4759-1-2001
| 紧固件公差.螺栓、螺钉、螺柱和螺母.产品等级A、B和C级
| Tolerances for fasteners - Bolts, screws, studs and nuts - Product grades A, B and C
|
| BS EN ISO 4759-3-2000
| 紧固件公差.螺栓、螺钉和螺母用平垫圈.产品等级A和C
| Tolerances for fasteners - Plain washers for bolts, screws and nuts - Product grades A and C
|
| BS EN ISO 6157-2-2004
| 紧固件.表面缺陷.螺母
| Fasteners - Surface discontinuities - Nuts
|
| BS EN ISO 6789-2003
| 螺钉和螺母用装配工具.手动扭具.设计合格检验、质量合格检验和再校准程序的要求和试验方法
| Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
|
| BS EN ISO 7040-1998
| 1型通用扭矩六角螺母(用非金属垫圈).性能类别5、8和10
| Prevailing torque type hexagon nuts (with non-metallic insert), style 1. Property classes 5, 8 and 10
|
| BS EN ISO 7042-1998
| 常用扭矩式全金属六角螺母.性能等级5、8、10和12
| Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12
|
| BS EN ISO 7719-1998
| 扭矩型全金属六角螺母.1型:5，8和10级特性
| Prevailing torque type all-metal hexagon nuts, style 1. Property classes 5, 8 and 10
|
| BS EN ISO 8662-7-1997
| 便携式手提动力工具.手柄振动测量.扳手,旋具与具有冲击,推力和棘齿作用的螺母旋具
| Hand-held portable power tools - Measurement of vibrations at the handle - Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action
|
| BS EN ISO 8673-2001
| 1型六角头螺母.米制细牙螺纹.产品等级A和B级
| Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B
|
| BS EN ISO 8674-2001
| 2型六角头螺母.米制细牙螺纹.产品等级A和B级
| Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B
|
| BS EN ISO 8675-2001
| 米制细牙螺纹六角头薄螺母（倒角）.产品等级A和B级
| Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B
|
| BS EN ISO 887-2000
| 通用米制螺栓、螺钉和螺母用平垫圈.总方案
| Plain washers for metric bolts, screws and nuts for general purposes - General plan
|
| BS EN ISO 898-6-1996
| 紧固件的机械特性.具有规定检验荷载值的螺母.细牙螺纹
| Mechanical properties of fasteners - Nuts with specified proof load values - Fine pitch thread
|
| BS HR 650-1972
| 制造螺栓、螺柱、定位螺钉和螺母用耐热高膨胀钢棒材和线材(Ni25.5、Cr15、Ti2、Mn1.5、Mo1.25、Si0.7、V0.3
| Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 20 mm)
|
| BS ISO 10102-2001
| 螺钉和螺母用装配工具.工程用双头呆扳手.扳手长度和头部厚度
| Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads
|
| BS ISO 10103-2001
| 螺钉和螺母用装配工具.双头直颈和弯颈套筒扳手.扳手长度和头部厚度
| Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads
|
| BS ISO 10104-2001
| 螺钉和螺母用装配工具.双头高颈和矮颈套筒扳手.扳手长度和头部厚度
| Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads
|
| BS ISO 10484-1997
| 螺母的加宽试验
| Widening test on nuts
|
| BS ISO 10663-1999
| 六角法兰面螺母.细牙螺纹
| Hexagon nuts with flange - Fine pitch thread
|
| BS ISO 1085-2000
| 螺钉和螺母用装配工具.双头扳手.尺寸配对
| Assembly tools for screws and nuts - Double-ended wrenches - Size pairing
|
| BS ISO 10897-1998
| 锥度比为1:10的刀架夹头.夹头、刀架和螺母
| Collets for tool holders with taper ratio 1:10 - Collets, holders , nuts
|
| BS ISO 10914-1998
| 螺钉和螺母用安装工具.开键槽用套管扳手
| Assembly tools for screws and nuts - Sockets and wrenches for spline drive
|
| BS ISO 1173-2001
| 螺钉和螺母用装配工具.机动和手动旋具类的驱动端和连接部件.尺寸和扭矩试验
| Assembly tools for screws and nuts - Drive ends for hand and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing
|
| BS ISO 2351-1-2007
| 螺钉和螺母用装配工具.机器驱动旋具头.一字槽头螺钉用旋具头
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for slotted head screws
|
| BS ISO 2351-2-2002
| 螺钉和螺母的装配工具.机器控制的改锥.十字槽凹头螺钉用改锥
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for cross-recessed head screws
|
| BS ISO 2351-3-2002
| 螺钉和螺母用装配工具.机器控制的改锥.六角内孔螺丝用改锥
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for hexagon socket screws
|
| BS ISO 262-1999
| ISO普通米制螺纹.螺钉,螺栓和螺母的选用尺寸
| ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
|
| BS ISO 2725-3-2001
| 螺钉和螺母用装配工具.方形传动套筒.机用套筒(无冲击).尺寸
| Assembly tools for screws and nuts - Square drive sockets - Machine-operated sockets ("non-impact") - Dimensions
|
| BS ISO 2982-2-2001
| 滚动轴承.附件.防松螺母和锁紧装置.尺寸
| Rolling bearings - Accessories - Locknuts and locking devices - Dimensions
|
| BS ISO 4161-1999
| 带法兰的六角螺母.粗螺纹
| Hexagon nuts with flange - Coarse thread
|
| BS ISO 6787-2001
| 螺钉和螺母用装配工具.可调扳手
| Assembly tools for screws and nuts - Adjustable wrenches
|
| BS ISO 7041-2002
| 2型常用扭矩式六角螺母(使用非金属垫圈).性能类别9和12
| Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12
|
| BS ISO 7720-1998
| 2型常用扭矩全金属六角螺母.性能9级
| Prevailing torque type all-metal hexagon nuts, style 2. Property class 9
|
| BS ISO 7738-2001
| 螺钉和螺母用组合工具.组合扳手.扳手长度和头部最大厚度
| Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads
|
| BS ISO 8788-2000
| 航空航天.米制螺母.形位公差
| Aerospace - Nuts, metric - Tolerances of form and position
|
| BS ISO 8992-2005
| 紧固件.螺栓、螺钉、螺柱和螺母通用要求
| Fasteners - General requirements for bolts, screws, studs and nuts
|
| BS S 158-1977
| 锻制螺栓和螺母的含1%铬-钼钢棒规范
| Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
|
| 编号 | 中文名称 | 英文名称 |
|---|