德国螺母标准(DIN nut standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
DIN 103-5-1972 ISO 米制梯形螺纹.标称直径8~100mm螺母螺纹的极限尺寸 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
DIN 103-6-1972 ISO 米制梯形螺纹.标称直径105~300mm螺母螺纹的极限尺寸 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
DIN 1478-2005 钢管材或钢棒材制套筒螺母 Turnbuckles made from steel tubes or round steel bars
DIN 15413-1983 起重机的下滑车.提升吊钩螺母 Bottom blocks for lifting appliances; lifting hook nuts
DIN 1587-2000 高型六角盖螺母 Hexagon domed cap nuts, high type
DIN 16262-2004 压力表用带调节螺母和轴套式连接的PN 6和PN 16旋塞 PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
DIN 16263-2004 压力表用带调节螺母、轴套式连接和试验连接的PN 16旋塞 PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
DIN 16283-2004 压力表及其附件用调整螺母 Adjusting nuts for pressure gauges and their accessories
DIN 16903-1-1974 塑料模塑件用开口螺母镶件 Open Insert Nuts for Plastics Mouldings
DIN 16903-2-1974 塑料模塑件用盘闭口螺母镶件 Closed Insert Nuts with Disc for Plastics Mouldings
DIN 16903-3-1974 塑料模塑用、带有固定孔的嵌件螺母 Closed Insert Nuts with Dead Hole for Plastics Mouldings
DIN 16903-4-1991 嵌入螺母.第4部分:塑料模制件和压铸件用重型闭式螺纹件 Insert nuts; heavy type for plastics mouldings and pressure die castings with dead hole
DIN 1804-1971 钩形扳手用开槽圆螺母.ISO米制细牙螺纹 Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread
DIN 1816-1971 内部有固定销孔的圆螺母.米制ISO细螺纹 Round Nut with Set Pin Holes Inside; ISO Metric Fine Thread
DIN 1988-7-2004 钢管和圆钢棒制作套筒螺母 Turnbuckles made from steel tubes or round steel bars
DIN 20033-1990 软管连接件.带压紧螺母的锥形管嘴 Hose fittings; tapered nozzle with clamping nut
DIN 2082-1-1979 第1部分:铣床心轴用螺母 Nuts for Milling Machine Arbors
DIN 22425-1990 矿山预防潜在性爆炸气体的电气设备.三角头螺母 Triangular nuts for use with electrical equipment in mining
DIN 2510-5-1971 带缩径杆的螺栓连接件.六角螺母 Bolted Connections with Reduced Shank; Hexagon Nuts
DIN 2510-6-1974 带减缩刀柄的螺栓连接件.第8部分:螺母 Bolted Connections with Reduced Shank; Cap Nuts
DIN 25200-1997 铁路车辆用螺钉、螺栓和螺母.一览表 Screws, bolts and nuts for rail vehicles - Summary
DIN 267-24-2007 紧固件.交货技术条件.第24部分:不带规定验证载荷值的螺母用硬度等级 Fasteners - Technical delivery conditions - Part 24: Hardness classes for nuts without specified proof load values
DIN 28129-1990 盖板用压紧螺母 Clamp nuts; for covers
DIN 28602-2000 球墨铸铁管及管件.栓接压盖密封接头.组件、套管、中间环、密封圈、螺栓和螺母 Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts
DIN 29638-2-1988 航空和航天.自锁压紧螺母.结构和安装说明 Aerospace; press nuts, self-locking; directions for design and installation
DIN 29639-2-1988 航空和航天.自锁、浮动、压紧螺母.结构和安装说明 Aerospace; press nuts, self-locking, floating; directions for design and installation
DIN 30386-2007 六角螺母.倒圆梯形螺纹 Hexagonal nuts - Rounded acme thread
DIN 30387-2007 带肩螺母.米制细牙螺纹、倒圆梯形螺纹 Shouldered nuts - Metric fine thread, rounded acme thread
DIN 30389-2007 动力装置螺旋扣和牵引挂钩用带圆螺纹的六角螺母和槽顶螺母 Hexagon and castle nuts with knuckle thread - For motive power units turnbuckles and drawbars
DIN 3118-2007 螺母扳手.C系列的试验扭矩 Flare nut wrenches - Test torques series C
DIN 314-1999 翼型螺母.带边的翼型 Wing nuts - Edged wings
DIN 315-1998 圆形翼的蝶形螺母 Wing nuts, rounded wings
DIN 3238-2001 压缩空气匹配件.爪状匹配件,带安全螺母内部宽度42mm,具有凸或凹软管连接末端的匹配件连接环 Couplings for compressed air - Claw coupling, 42 mm internal width, with securing nut - Coupling with male, female and hose connection ends, joint ring
DIN 3292-1-1984 家用安装设备配件.有色金属活接头螺母 Fittings for domestic installation; nonferrous metal union nuts
DIN 3292-2-1984 家用安装设备配件.可锻铸铁活接头螺母 Fittings for domestic installation; malleable cast iron union nuts
DIN 34814-1999 塑料制六角螺母 Plastic hexagon nuts
DIN 34818-2002 带攻丝螺纹的薄弹簧螺母 Sheet spring nuts with tappping screw thread
DIN 3489-2001 压缩空气匹配件.爪状匹配件,无安全螺母的42mm内宽,凸形凹形匹配件,软管和封闭连接末端旋转匹配件,连接环 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring
DIN 357-1998 米制粗螺距ISO螺纹M3至M68的机器螺母丝锥 Machine nut taps for coarse pitch metric ISO-threads M3 to M68
DIN 3853-2001 非钎焊和钎焊压合接头.与管接螺母使用的双头螺栓端部.设计图 Non-soldering and soldering compression fittings - Stud ends for use with union nut; Design sheet
DIN 3870-2001 非钎焊和钎焊压合接头.管接螺母系列LL Non-soldering and soldering compression fittings - Union nuts series LL
DIN 3872-2003 非焊接压紧联轴节.对接结构活接头螺母 Non-soldering compression couplings - Union nuts for butt joints
DIN 4000-151-2005 特性表.第151部分:螺钉和螺母用手动和机动装配工具的连接部件 Tabular layouts of properties - Part 151: Connecting parts for hand- and machine-operated assembly tools for screws and nuts
DIN 4000-2 Bb.1-1999 零件特性图表.第2部分:螺钉和螺母.螺钉的技术标准 Tabular layouts of article characteristics - Part 2: Screws and nuts; attribution to technical standards on screws
DIN 4000-2 Bb.2-1999 零件特性图表.第2部分:螺钉和螺母.螺母的技术标准 Tabular layouts of article characteristics - Part 2: Screws and nuts; attribution to technical standards on nuts
DIN 431-2000 带DIN ISO 228-1螺纹的管螺母 Pipe nuts with thread according to DIN ISO 228-1
DIN 44879-1985 带金属护罩的管状电加热器的连接管用的扁平六角螺母和螺钉头 Flat hexagon nuts for nipples and screw heads for electrical tubular heating elements, metal-sheated
DIN 462-1973 机床.按DIN 1804钩形扳手用开槽圆螺母的内舌垫圈 Machine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner according to DIN 1804
DIN 466-2006 滚花长形螺母 Knurled nuts, high type
DIN 467-2006 短型滚花螺母 Knurled nuts, low type
DIN 48324-1959 1KV以下通信线路和电力架空线.系杆.墙板和吊耳螺母 Telecommunication and power current overhead lines below 1 kV; tie bar, wall plate, lifting eye nut
DIN 48351-2-1967 A形天线杆.第2部分:螺栓、螺母、垫圈 A-masts; bolts, nuts, washers
DIN 49778-7-1990 照明灯柱.安装装置用带滑动螺母的托架 Lighting columns; brackets with sliding nuts for mounting of devices
DIN 508-2002 T型槽用螺母 Nuts for T-slots
DIN 5290-1-1983 有锁紧螺母的轻金属弹簧钩.尺寸、要求、检验 Snap hook from light metal; with setting nut; dimensions, requirements and testing
DIN 5290-2-1977 无定位螺母的轻金属弹簧箍.第2部分:尺寸、交货技术条件 Light metal spring hook without setting nut; dimensions, technical conditions of delivery
DIN 546-1986 开槽圆螺母 Slotted round nuts
DIN 547-2006 一端钻孔的圆螺母 Round nuts with drilled holes in one face
DIN 548-2007 侧面带销钉的圆螺母 Round nuts with set pin holes in side
DIN 557-1994 方螺母.C级产品 Square nuts; product grade C
DIN 562-2000 方扁螺母.产品等级 B级 Square thin nuts - Product grade B
DIN 56926-1997 剧场和舞台方位布景.带锁紧螺母的快速连接件.尺寸、要求和试验 Theatre engineering, stage directions scenery - Quick links with screw caps - Dimensions, requirements and testing
DIN 582-2003 吊环螺母 Eye nuts
DIN 58521-1994 绘图仪器用滚花螺母 Knurled nuts for drawing instruments
DIN 6303-2006 滚花螺母 Knurled nuts
DIN 6305-2002 带固定卡式螺栓的螺丝旋杆螺母 Tommy nuts with fixed clamping bolt
DIN 6307-2002 带移动卡式螺栓的螺丝旋杆螺母 Tommy nuts with movable clamping bolt
DIN 6327-4-1981 莫氏锥柄刀具的可调转接器.转接器的调整螺母 Adjustable adaptors for tools with morse taper shanks; adjustment nuts for adaptors
DIN 6330-2003 1.5d厚六角头螺母 Hexagon nuts with a height of 1,5 d
DIN 6331-2003 1.5d厚六角头环形螺母 Hexagon collar nuts with a height of 1,5 d
DIN 6379-2003 与T型槽螺母共用的螺柱 Studs for use with tee nuts
DIN 65121-1992 航空航天.螺栓、螺钉、螺母和有关零件.供车间查看的产品一览表和选用.不适用于新设计 Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design
DIN 65220-2002 航空航天.固定式或可选择式铝槽螺母间距带MJ螺纹自锁螺母的成组槽形螺母组件.分类:1100MPa/120℃ Aerospace - Gang channel nut assembly, with self-locking nuts, with MJ thread, nut spacing fixed or optional, channel in aluminium; Classification: 1100 MPa/120 °C
DIN 65238-2002 航空航天.自锁非浮动钢制角缘带MJ螺纹深埋头锚定螺母.分类:1100MPa/235℃ Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 °C
DIN 65239-2006 航空航天.深沉孔、不浮动、带角、耐腐蚀钢制的MJ螺纹自锁托板螺母.等级:1100MPa/315℃/425℃ Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
DIN 65240-2002 航空航天.自锁浮动钢制双耳带MJ螺纹深埋头锚定螺母.分类:1100MPa/235℃ Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 °C
DIN 65242-2006 航空航天.带深沉孔、浮动、双耳、带MJ螺纹的耐腐蚀钢制自锁托板螺母.等级:1100MPa/315℃/425℃ Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
DIN 65243-2002 航空航天.单耳浮动自锁深埋头带MJ螺纹的钢制锚定螺母.分类:1100MPa/235℃ Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, steel; Classification: 1100 MPa/235 °C
DIN 65244-2006 航空航天.带圆柱形深沉孔、浮动、单耳、带MJ螺纹耐腐蚀钢制自锁托板螺母.等级:1100MPa/315℃/425℃ Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
DIN 65245-1984 航空和航天.钢制、带MJ螺纹的六角自锁螺母.等级:1100MPa/120℃ Aerospace; nuts, hexagon, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C
DIN 65246-1984 航空和航天.钢制、带MJ螺纹、有槽/槽顶六角自锁螺母.等级:1100MPa/120℃ Aerospace; nuts, hexagon, slotted/castellated, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C
DIN 65247-1989 航空航天.耐蚀钢制MJ螺纹的薄型槽形/冠状的六角头螺母.等级:公称抗拉强度110MPa/使用温度425℃以下 Aerospace; nuts, hexagon, slotted/castellated, thin, with MJ thread, corrosion-resisting steel, class: 1100 MPa/425 °C
DIN 65249-1987 航空航天.铜合金制的MJ螺纹自锁六角头螺母.等级:400MPa/120℃ Aerospace; nuts, hexagon, with MJ thread, self-locking, in copper-alloy; class: 400 MPa/120 °C
DIN 65270-1992 航空航天.带MJ螺纹的、开槽/槽顶开槽耐腐蚀钢制自锁螺母.等级:1100MPa/120℃ Aerospace; nuts, hexagon, slotted/castellated, with MJ thread self-locking, corrosion-resisting steel; classification: 1100 MPa/120 °C
DIN 65281-2005 航空航天系列.MJ螺纹、耐腐蚀钢制薄型六角螺母.等级:1100MPa/315℃/425℃ Aerospace series - Nuts, hexagon, thin, with MJ thread, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
DIN 65342-2005 航空航天系列.耐腐蚀钢制自锁紧带深沉孔、双耳、缩径、MJ螺纹地脚螺母.等级:1100MPa/315℃/425℃ Aerospace series - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
DIN 65343-2002 航空航天.双耳减缩自锁深埋头带MJ螺纹的钢制锚定螺母.分类:1100MPa/235℃ Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; Classification: 1100 MPa/235 °C
DIN 65344-2005 航空航天.耐腐蚀钢制带深沉孔、双耳、MJ螺纹自锁紧地脚螺母.等级:1100MPa/315℃/425℃ Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
DIN 65345-1986 航空航天.带圆柱形深沉孔、双耳、具有MJ螺纹的钢制自锁托板螺母.等级:1100MPa/235℃ Aerospace; anchor nuts with MJ thread, deep counterbore, self-locking, two lug, steel; classification: 1100 MPa/235 °C
DIN 65346 Berichtigung 1-2007 航空航天系列.等级为:1100MPa/315℃/425℃、耐腐蚀钢单耳自锁深沉孔带MJ螺纹的托板螺母.DIN 65346-2006技术 Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C, Corrigenda to DIN 65346:2006-11
DIN 65346-2006 航空航天.带圆柱形深沉孔、单耳、带MJ螺纹的耐腐蚀钢制自锁托板螺母.等级:1100MPa/315℃/425℃ Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
DIN 65347-2002 航空航天.单耳自锁深埋头带MJ螺纹的钢制锚定螺母.分类:1100MPa/235℃ Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 °C
DIN 65349-2001 航空航天.米制螺纹螺母和相关螺钉部件锁扭矩试验.试验方法 Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods
DIN 65391-2002 航空航天.自锁耐腐蚀钢制带MJ螺纹的加压螺母.分类:1100MPa/315℃/435℃ Aerospace - Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
DIN 65392-2002 航空航天.浮动自锁带MJ螺纹的钢制加压螺母.分类:1100 MPa/235℃ Aerospace - Press nuts with MJ thread, self-locking, floating, steel; Classification: 1100 MPa/235 °C
DIN 65477-2003 航空航天.耐腐蚀钢制自锁紧封闭型压紧螺母.等级:1100 MPa/315 鳦/425 鳦 Aerospace - Press nuts, with MJ thread, closed type, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
DIN 65480-1989 航空航天.带凸缘和MJ螺纹耐腐蚀钢制自锁六角螺母.等级:1100MPa/315℃ Aerospace; hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel; class: 1100 MPa/315 °C
DIN 65500-1984 航空和航天.带MJ螺纹铝合金扁六角螺母 Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy
DIN 65501-2001 航空和航天.带MJ螺纹铆接螺母垫片 Aerospace - Shims for anchor nuts with MJ-thread
DIN 65505-2003 航空航天.自锁、气密、双耳、钢制带MJ螺纹地脚螺母.等级900MPa、耐-55℃至+230℃空气 Aerospace - Anchor nuts, with MJ-thread, self-locking, pressure tight, two lug, steel; Classification: 900 MPa, air resistant from -55 °C to 230 °C
DIN 65507-1986 航空航天.带附加垫圈和沉头孔、自锁、MJ螺纹的六角螺母.等级:1100MPa/235 Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, steel; class: 1100 MPa/235 °C
DIN 65508-1986 航空航天.带凸缘垫片和埋头孔、自锁、耐腐蚀钢带MJ螺纹的六角螺母.等级:1100MPa/315℃/425℃ Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, corrosion-resistant steel; class: 1100 MPa/315 °C/425 °C
DIN 65509-1984 航空和航天.带MJ螺纹、等级:1100MPa/235℃钢制六角螺母 Aerospace; nuts, hexagon, with MJ-thread, steel, class: 1100 MPa/235 °C
DIN 65510-1984 航空和航天.带MJ螺纹、等级:1100MPa/235℃钢制扁六角螺母 Aerospace; nuts, hexagon, thin, with MJ-thread steel, classification: 1100 MPa/235 °C
DIN 65528-2005 航空航天系列.钢制自锁紧、带深沉孔、凸缘和MJ螺纹的十二角螺母.等级:1550MPa/1800MPa/235℃ Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1550 MPa/1800 MPa/235 °C
DIN 65529-2005 航空航天系列.钢制自锁紧、带深沉孔、凸缘和MJ螺纹的十二角螺母.等级:1250MPa/235℃ Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1250 MPa/235 °C
DIN 65530-2006 航空航天.耐腐蚀刚制自锁紧深埋头孔的带凸缘和MJ螺纹的十二角螺母.等级:1550 MPa/315℃/425℃ Aerospace - Nuts, bihexagonal with flange and MJ thread, deep counterbore, self-locking, corrosion-resisting steel, classification: 1550 MPa/315 °C/425 °C
DIN 65531-2005 航空航天系列.耐腐蚀钢制自锁紧、带深沉孔、凸缘和MJ螺纹的十二角螺母.等级:1250 MPa/315 鳦/425 鳦 Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting, steel, class: 1250 MPa/315 °C/425 °C
DIN 65533-1987 航空航天.螺栓、螺钉和螺母.材料的分配及表面处理.推荐性选择 Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection
DIN 65534-1992 航空航天.耐蚀钢制MJ螺纹的六角头螺母.等级:1100/650℃ Aerospace; nuts, hexagon, with MJ-thread, corrosion resisting steel; classification: 1100 MPa/650 °C
DIN 65535-1986 航空航天.耐腐蚀钢制带MJ螺纹的自锁螺母多槽螺母组件.螺母间距为固定的或可选的.等级:1100MPa/315℃ Aerospace; gang channel nut assembly, with self-locking nuts with MJ thread, nut spacing fixed or optional, in corrosion-resisting steel; class: 1100 MPa/315 °C
DIN 65546-2005 航空航天系列.耐腐蚀钢制自锁紧、带深沉孔、凸缘和MJ螺纹的十二角螺母.等级:1100 MPa/315 鳦/425 鳦 Aerospace series - Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting steel, class: 1100 MPa/315 °C/425 °C
DIN 65553-2001 航空航天.MJ螺纹铆接螺母用无孔金属垫片,不适用于新设计 Aerospace - Shims, without hole, for anchor nuts with MJ thread; Not to be used for new designs
DIN 6796-1987 螺栓和螺母用螺旋弹簧垫圈 Conical spring washers for bolt/nut assemblies
DIN 69051-5-2002 机床.球形螺钉.第5部分:球形螺母的安装尺寸 Machine tools - Ball screws - Part 5: Mounting dimensions for ball nuts
DIN 69895-2006 HSK中央冷却供应.DIN 69893-5的E类和DIN 69893-1的A类的锥形空心柄的螺纹螺母冷却管.尺寸 Central coolant supply for HSK - Coolant pipe with threaded nut for hollow taper shanks, type A according to DIN 69893-1 and type E according to DIN 69893-5 - Dimensions
DIN 70615-1990 汽车工程用的带小宽度对边的六角螺母(不准备用于新设计) Hexagon nuts with small widths across flats for use in automotive engineering (not intended for new designs)
DIN 70616-1990 汽车制造.带小开口度的扁六角螺母(不适于新设计) Hexagon thin nuts with small widths across flats for use in automotive engineering (not intended or new designs)
DIN 70617-1990 汽车制造工业用带宽度对边的六角头开槽螺母(不适于新设计) Hexagon slotted nuts with small widths across flats for use in automotive engineering (not intended for new designs)
DIN 70618-1990 汽车制造.带小开口度的扁冠状螺母(不适于新设计) Hexagon thin slotted nuts with small widths across flats for use in automotive engineering (not intended for new designs)
DIN 70810-1-1971 第1部分:开口型方形螺母用螺母夹具 Nut holders for square nuts, open type
DIN 70810-2-1971 第2部分:封闭型方形螺母用螺母夹具 Nut holders for square nuts, closed type
DIN 70852-1989 开槽螺母.尺寸 Groove nuts; dimensions
DIN 70952-1976 DIN 70852 开槽螺母的锁紧片 Locking plates for groove nuts DIN 70852
DIN 71428-1989 椭圆形压接连接的管接头.用联管螺母连接的圆柱形螺纹旋入连接管 Compression couplings with olives; cylindrical thread nipples for use with union nuts
DIN 71429-1989 椭圆形压接连接的管接头.用联螺母连接的闷头压接联接器的小螺柱和肘节管接头 Compression couplings with olives; bulkhead compression couplings small stud and elbow fittings for use with union nuts
DIN 71430-1989 椭圆形压接连接的管接头.用联管螺母旋转连的管接头 Compression couplings with olives; swiveling fittings for use with union nuts
DIN 71433-1989 椭圆形压接连接的管接头.用联螺母连接的的三通管接头和肘节管接头 Compression couplings with olives; T-fittings and elbow fittings for use with union nuts
DIN 74233-2-1991 液压制动系统.制动管道配件.第2部分:制动管道管接螺母 Hydraulic braking systems; fittings for brake pipes; union nuts for brake pipes
DIN 7968-2007 钢结构用带六角螺母的六角头配合螺栓 Hexagon fit bolts with hexagon nut for steel structures
DIN 7969-2007 钢结构用带六角螺母的带槽沉头螺栓 Slotted countersunk head bolts with hexagon nut for steel structures
DIN 7990-2007 钢结构用带六角螺母的六角头螺栓 Hexagon head bolts with hexagon nut for steel structures
DIN 806-1971 无拔出器螺母的60°车床顶尖 60° lathe centres without extractor nut
DIN 8063-4-1983 未增塑聚氯乙烯压力管道用管连接组件和接头.内外螺母、法兰盘、密封件.尺寸 Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions
DIN 807-1966 带拔出器螺母的60°车床顶尖 Lathe centres 60° with extractor nut
DIN 80701-1991 肘节螺母 Toggle nuts
DIN 80704-1968 弓形螺母.米制螺纹 Bow Nuts; Metric Screw Thread
DIN 80705-1990 带小开口度、粗牙螺纹和细牙螺纹的扁螺母 Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
DIN 82013-1976 圆螺母 Round Nuts
DIN 8537-1970 气动工具.锥形喷气管嘴、连接螺母、连接管 Pneumatic tools; cone nozzle tips, connection nuts, connection nipples
DIN 86056-2001 钢管和铜或铜合金管用锁紧螺母和密封圈的引入管套筒 Conduits pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys
DIN 8912-1990 制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头用的接头螺母和螺纹堵塞 Coupling nuts and screwed plugs for use with PN 40 flared flange solderless compression couplings in refrigerating systems
DIN 898-1995 螺钉和螺母的装配工具.概述、术语和定义 Assembly tools for screws and nuts - Survey, terms and definitions
DIN 917-2000 低型六角头盖螺母 Hexagon cap nuts, low type
DIN 928-2000 方形焊接螺母 Square weld nuts
DIN 929-2000 六角焊接螺母 Hexagon weld nuts
DIN 935-1-2000 六角开槽螺母和槽形螺母.第1部分:米制粗牙和细牙螺纹.产品等级A和B Hexagon slotted and castle nuts - Part 1: Metric coarse and fine pitch thread; Product grades A and B
DIN 935-3-2000 六角开槽螺母.第3部分:米制粗牙螺纹.产品等级C Hexagon slotted nuts - Part 3: Metric coarse pitch thread; Product grade C
DIN 962-2001 螺栓、螺钉、双头螺栓和螺母.标识、型号和精整 Bolts, screws, studs and nuts - Designation, types and finishes
DIN 974-2-1991 六角螺栓、螺钉和螺母用沉头孔直径.制造尺寸 Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
DIN 979-2000 六角开槽薄螺母和槽形螺母.米制粗牙和细牙螺纹.产品等级A和B Hexagon thin slotted and castle nuts - Metric coarse and fine pitch thread - Product grades A and B
DIN 981-1993 滚动轴承.锁紧螺母 Rolling bearings; locknuts
DIN 986-2000 带非金属嵌件的长规扭矩式六角盖螺母 Prevailing torque type hexagon domed cap nuts with non-metallic insert
DIN 987-1960 钢芯带铆接凸缘自锁螺母 Plate nuts with steel core, self-locking
DIN EN 14218-2003 六角法兰面螺母.细牙螺纹 Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified); German version EN 14218:2003
DIN EN 14399-3-2006 预加负荷用高强度结构螺栓组件.第3部分:系统HR.六角螺栓和螺母组件 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies English version of DIN EN 14399-3:2006-06
DIN EN 14399-4-2006 预加负荷用高强度结构螺栓组件.第4部分:系统HV.六角螺栓和螺母组件 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies English version of DIN EN 14399-4:2006-06
DIN EN 1661-1998 带法兰的六角螺母 Hexagon nuts with flange (ISO/DIS 4161:1996, modified); German version EN 1661:1997
DIN EN 1663-1998 带有法兰的经常施用扭矩型六角螺母(带非金属镶嵌件) Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified); German version EN 1663:1997
DIN EN 1664-1998 经常施用扭矩型带法兰的全金属六角螺母 Prevailing torque type - All-metal hexagon nuts with flange (ISO 7044:1997, modified); German version EN 1664:1997
DIN EN 1666-1998 米制小螺距螺纹的带法兰(带有非金属镶嵌件)的经常作用的扭矩型六角头螺母 Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125:1997, modified); German version EN 1666:1997
DIN EN 1667-1998 米制小螺距螺纹的带法兰的经常作用的扭矩型全六角头螺母 Prevailing torque type all hexagon nuts with flange, with metric fine pitch thread (ISO 12126:1997, modified); German version EN 1667:1997
DIN EN 20225-1992 紧固件.螺钉、螺柱和螺母.尺寸符号和标示(ISO 225-83) Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning (ISO 225:1983); german version EN 20225:1991
DIN EN 20898-2-1994 紧固件的机械性能.第2部分:有规定检验载荷值的螺母.粗牙螺纹 Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread (ISO 898-2:1992); German version EN 20898-2:1993
DIN EN 2264-1996 航空航天系列.合金钢镀镉MoS2润滑带各种深度圆柱形沉头孔双面法兰活动式自锁铆接螺母.等级:900MPa(室温)/23 Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2264:1996
DIN EN 2647-2007 航空航天系列.镀隔合金钢加 MoS<下标2> 润滑剂的球形座自锁六角螺母.等级:900MPa(环境温度)/235℃ Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2647:2006
DIN EN 2680-2007 航空和航天系列.米制系列MOS2润滑的钝化镀镉合金钢双耳自准、锁紧浮动地脚螺母.等级:900MPa/235℃ Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2680:2006
DIN EN 2752-1990 航空航天.带圆柱形划孔双面截短法兰自锁式铆接螺母.等级1100MPa/223℃ Aerospace; nuts, anchor, self locking, fixed, two lug, reduced series, with counterbore; classification: 1100 MPa/235 °C; german version EN 2752:1989
DIN EN 2753-1996 航空航天系列.合金钢镀镉MoS(角注2)润滑带圆柱形沉头孔单面法兰自锁铆接螺母.等级 1100MPa(室温)/235℃ Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2753:1996
DIN EN 2809-2001 航空航天系列.耐热钢制镀银标称对边高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃; 德文版本 EN Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2809:2001
DIN EN 2810-2001 航空航天系列.耐热钢制钝化标称对边高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃; 德文版本 EN Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2810:2001
DIN EN 2856-2007 航空和航天系列.自锁固定式锐角缩径有沉孔的地脚螺母.分类:1100MPa/235℃ Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1100 MPa/235 °C; German and English version EN 2856:2006
DIN EN 2881-2007 航空和航天系列.米制系列MOS2润滑的钝化耐腐蚀、耐燃钢沉头双耳密封锁紧浮动地脚螺母.等级:900MPa/120℃ Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2881:2006
DIN EN 28839-1991 紧固件的机械性能.有色金属制造的螺栓、螺钉、螺柱和螺母 Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
DIN EN 2906-1994 航空航天系列.耐高温钢 FE-PA92HT(A286) 自锁十二角螺母.等级:1100 MPa (室温) 摄氏 650 度; 德文版本 EN 2 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2906:1994
DIN EN 2907-1995 航空航天系列.镀银耐高温钢FE-PA92HT(A286)自锁十二角螺母.等级:1100MPa(室温)/650℃; 德文版本 EN 2907:19 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2907:1995
DIN EN 2908-1994 航空航天系列.耐高温钢 FE-PA92HT(A286) 深埋头孔自锁十二角螺母.等级:1100 MPa 室温)摄氏 650 度 ; 德文版 Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2908:1994
DIN EN 2909-1995 航空航天系列.耐高温钢 FE-PA92HT(A286) 深沉孔自锁镀银十二角螺母.等级:1100 MPa (室温) 摄氏 650 度; 德 Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2909:1995
DIN EN 2910-1994 航空航天系列.耐高温钢 FE-PA92HT(A286) 自锁铆钉体螺母.等级:1100 MPa (室温) 摄氏 650 度; 德文版本 EN 2 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2910:1994
DIN EN 2911-1995 航空航天系列.耐高温钢 FE-PA92HT(A286) 自锁镀银铆钉体螺母.等级:1100 MPa (室温) 摄氏 650 度; 德文版本 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2911:1995
DIN EN 2997-4-1997 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第4部分:带锁紧螺母 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 4: Jam-nut mounted receptacle; product standard; German version EN 2997-4:1997
DIN EN 2997-6-1997 航空航天.工作温度常数为175℃、200℃极值为260℃耐火或不耐火螺纹连接圆形电气插接件.第6部分:带锁紧螺母 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 6: Hermetic jam-nut mounted receptacle; product standard; German version EN 2997-6:1997
DIN EN 3004-1997 航空航天系列.耐高温钢FE-PA2601(A286)MJ螺纹自锁螺母.等级:1100MPa/650℃.交货技术条件 Aerospace series - Nuts, self-locking, MJ theads, in heat resisting steel FE-PA2601 (A286); classification: 1100 MPa (at ambient temperature)/650 °C; technical specification; German version EN 3004:1997
DIN EN 3005-2005 航空航天系列.镀银或未涂覆的耐热镍基合金NI-PH1302制MJ螺纹自锁紧螺母.等级:1210 MPa(室温)/730 鳦.技术规 Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature)/730 °C - Technical specification; German and English version EN 3005:2004
DIN EN 3012-1995 航空航天系列.耐高温镍基合金HI-P101HT自锁十二角螺母.等级:1210Mpa(室温)/730℃; 德文版本 EN 3012:1995 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3012:1995
DIN EN 3013-1995 航空航天系列.镀银耐高温镍基合金(NI-P101HT)自锁十二角螺母.等级:1210MPa(室温下)/730℃; 德文版本 EN 301 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3013:1995
DIN EN 3014-2001 航空航天系列.耐热钢FE-PA2601(A286)制锯齿形自锁紧带柄螺母.等级:1100MPa(室温)/650℃; 德文版本 EN 3014: Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification 1100 MPa (at ambient temperature)/650 °C; German version EN 3014:2001
DIN EN 3015-2001 航空航天系列.耐热钢FE-PA2601(A286)制锯齿形镀银自锁紧带柄螺母.等级:1100MPa(室温)/650℃; 德文版本 EN 3 Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification 1100 MPa (at ambient temperature)/650 °C; German version EN 3015:2001
DIN EN 3064-1996 航空航天系列.锯齿形自锁铆接螺母.安装程序 Aerospace series - Shank nuts, self-locking, serrated - Installation procedure; German version EN 3064:1996
DIN EN 3065-1996 航空航天系列.自锁啮合铆接螺母安装孔.设计标准 Aerospace series - Installation holes for self-locking, serrated shank nuts; design Standard; German version EN 3065:1996
DIN EN 3080-2007 航空航天系列.钛合金8°30'管接头.带有推力线螺母的缩短三通 Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut; German and English version EN 3080:2006
DIN EN 3149-1996 航空航天系列.铆接螺母.60度扩径安装孔法兰.设计标准 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard; German version EN 3149:1996
DIN EN 3152-2005 航空航天系列.镀银或未涂覆的耐热钢FE-PA2601 (A286)制MJ螺纹自锁紧螺母.等级:1100 MPa(室温)/425 鳦.技术 Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated - Classification: 1100 MPa (at ambient temperature)/425 °C - Technical specification; German and English version EN 3152:2004
DIN EN 3196-1994 航空航天系列.耐高温钢 FE-PA92HT(A286) 镀银自锁六角头螺母.等级:1100 MPa (室温)摄氏 425 度; 德文版本 E Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3196:1994
DIN EN 3230-2001 航空航天系列.钢制镀镉标称对边高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/235℃; 德文版本 EN 3230 Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 3230:2001
DIN EN 3239-1995 航空航天系列.镀银螺纹耐高温镍基合金NI-P101HT(沃斯帕洛尹合金)自锁十二角螺母.等级:1210MPa(室温)/730℃; Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/650 °C; German version EN 3239:1995
DIN EN 3264-2002 航空航天系列.钛合金8°30'管连接件.推力金属丝螺母; 德文版本 EN 3264:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Thrust wire nuts; German version EN 3264:2001
DIN EN 3266-2002 航空航天系列.钛合金管连接件.闷头螺母; 德文版本 EN 3266:2001 Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut; German version EN 3266:2001
DIN EN 3377-1996 航空航天系列.高温钢FE-PA92HT(A286)自锁六角螺母.等级:1100 MPa(室温下)/425℃ Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3377:1996
DIN EN 3379-1996 航空航天系列.高温镍基合金NI-P101HT(沃斯帕落伊合金)厚螺母用中螺纹十二角配合螺栓.等级:1210 MPa(室温)/7 Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3379:1996
DIN EN 3536-2007 航空航天系列.MoS<(指数)2>润滑的自锁耐热钢六角螺母.等级:1100MPa(室温)/315℃ Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3536:2006
DIN EN 3626-2007 航空航天系列.MoS<(指数)2>润滑的镀镉钢制自锁六角螺母.等级:1100MPa(室温)/235℃ Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3626:2006
DIN EN 3646-004-2007 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第004部分:锁紧螺母安装插座.产品标准 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard; German and English version EN 3646-004:2006
DIN EN 3646-006-2007 航空航天系列.持续工作温度为175℃或200℃的圆形卡口式联结电连接器.第006部分:锁紧螺母安装密封插座.产品 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard; German and English version EN 3646-006:2006
DIN EN 3660-003-2007 航空航天系列.圆形和矩形光电连接器用电缆引出端附件.第003部分:EN 2997和EN 4067中A型穿孔螺母.产品标准 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard; German and English version EN 3660-003:2006
DIN EN 3712-2007 航空航天系列.MoS2润滑的镀镉钢制沉孔缩径固定式单耳自锁紧系紧螺母.分类:1100MPa(室温)/235℃ Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3712:2007
DIN EN 3720-1995 航空航天系列.加 MoS<下标2> 涂层的耐高温钢 FE-PA92HT(A286) 自锁十二角螺母.等级:1100 MPa (室温)/425℃; Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3720:1995
DIN EN 3721-1995 航空航天系列.加 MoS<下标2> 涂层的耐高温钢 FE-PA92HT(A286) 深沉孔自锁十二角螺母.等级:1100 MPa (室温)/ Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3721:1995
DIN EN 3722-1995 航空航天系列.加 MoS<下标2> 涂层的耐高温钢FE-PA92HT(A286)自锁铆钉体螺母.等级:1100MPa(室温)/425℃; 德 Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3722:1995
DIN EN 3723-1996 航空航天系列.高温钢FE-PA92HT(A286)MoS2涂覆自锁六角螺母.等级:1100 MPa(室温下)/425℃ Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3723:1996
DIN EN 3726-2005 航空航天系列.MoS2耐热钢FE-PA2601 (A286)制自锁紧夹紧螺母.强度等级:1100 MPa(室温)/425鳦 Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3726:2004
DIN EN 3741-2005 航空航天系列.米制夹紧螺母.安装孔及组件 Aerospace series - Nuts, clip, metric - Installation holes and assembly; German and English version EN 3741:2004
DIN EN 3752-2005 航空航天系列.MoS2涂覆的耐热钢FE-PA2601 (A286)制MJ螺纹自锁紧螺母.等级:1100 MPa(室温)/425 鳦.技术规范 Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C - Technical specification; German and English version EN 3752:2004
DIN EN 4011-2006 航空航天系列.十二角头自锁紧镀银耐热镍基合金NI-PH2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/600 °C Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4011:2004
DIN EN 4012-2006 航空航天系列.NI-PH2601(铬镍铁合金718)型耐热镍基合金制,镀MoS<上标2>的自锁、十二角螺母.分类:1550MPa(室 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS coated - Classification: 1550 MPa (at ambient temperature)/425 °C; German and English version EN 4012:2004
DIN EN 4013-2006 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制镀银的自锁紧带柄螺母.等级:1550MPa(室温)/600℃ Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4013:2004
DIN EN 4018-2002 航空航天系列.钛合金管连接件 8°30'.带止推金属丝螺母的 90°弯头; 德文版本 EN 4018:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbow 90°, with thrust wire nut; German version EN 4018:2001
DIN EN 4020-2006 航空航天系列. 8°30'钛合金管接头.带推进线螺母的90°弯头焊接端 Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, welded end with thrust wire nut; German and English version EN 4020:2001
DIN EN 4024-2002 航空航天系列.钛合金管连接件 8°30'.带止推金属丝螺母的焊接端 45°弯头; 德文版本 EN 4024:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 45°, welded end with thrust wire nut; German version EN 4024:2001
DIN EN 4027-2002 航空航天系列.钛合金管连接件 8°30'.带止推金属丝螺母的三通管分支; 德文版本 EN 4027:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees, branch, with thrust wire nut; German version EN 4027:2001
DIN EN 4028-2006 航空航天系列.8°30'钛合金管接头.端部带推进线螺母的三通 Aerospace series - Pipe coupling 8°30′ in titanium alloy - Tees with thrust wire nut on run; German and English version EN 4028:2001
DIN EN 4031-2002 航空航天系列.钛合金管连接件 8°30'.焊接金属箍用螺母; 德文版本 EN 4031:2001 Aerospace series - Pipe coupling 8°30 in titanium alloy - Nuts for welded ferrule; German version EN 4031:2001
DIN EN 4047-2006 航空航天系列.镀银耐高温镍基合金NI-PH2601(铬镍铁合金718)自锁螺母.等级:1 550 MPa(室温)/600℃.技术规范 Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600 °C - Technical specification; German and English version EN 4047:2004
DIN EN 4048-2006 航空航天系列.NI-PH2601(铬镍铁合金718)耐热镍基合金制MJ螺纹自锁紧的镀银螺母.分类:1550MPa(室温)/425 ℃ Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1550 MPa (at ambient temperature) / 425 °C - Technical specification; German and English version EN 4048:2004
DIN EN 4069-1996 航空航天系列.钝化耐高温钢制小板手开口度平面六角螺母.等级:600MPa(室温)/650℃ Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C; German version EN 4069:1996
DIN EN 4116-2006 航空航天系列.耐热钢FE-PA2601 (A286)制自锁、螺纹镀银的六角螺母.等级:1100MPa(室温)/425℃ Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) / 425 °C; German and English version EN 4116:2004
DIN EN 4117-2006 航空航天系列.十二角头自锁紧螺纹镀银的耐热镍基合金NI-PH2601(铬镍铁合金718)螺母.等级:1550MPa(室温)/ 60 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1550 MPa (at ambient temperature) / 600 °C; German and English version EN 4117:2004
DIN EN 4118-2006 航空航天系列.螺纹镀银的耐热钢FE-PA2601 (A286)制双六角头自锁螺母.等级:1100MPa(室温)/ 650 °C Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 4118:2004
DIN EN 4119-2006 航空航天系列.螺纹上镀银的耐热钢FE-PA2601 (A286)制深沉头孔自锁紧十二角螺母.等级:1100 MPa(室温)/650 ° Aerospace series - Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 4119:2004
DIN EN 4120-2006 十二角、自锁紧、NI-PH1302耐热镍基合金(沃斯帕洛尹合金)、螺纹镀银的螺母.分类:1210MPa(环境温度下)/730 Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread - Classification: 1210 MPa (at ambient temperature)/730 °C; German and English version EN 4120:2004
DIN EN 4121-2006 航空航天系列.螺纹上镀银的耐热钢FE-PA2601(A286)制自锁紧、锯齿状带柄螺母.等级:1100MPa(环境温度)/650℃ Aerospace series - Shank nuts, serrated, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 4121:2004
DIN EN 4122-2006 航空航天系列.螺纹镀银的耐热钢FE-PA2601(A286)制自锁紧带柄螺母.等级:1100MPa(室温)/650℃ Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 4122:2004
DIN EN 4123-2006 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制镀银的自锁紧带柄螺母.等级:1550MPa(室温)/600℃ Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4123:2004
DIN EN 4124-2006 航空航天系列.耐热镍基合金NI-PH1302(沃斯帕洛尹合金)制60°连接模镀银的自锁紧带柄螺母.等级:1210MPa(室温 Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1210 MPa (at ambient temperature) / 730 °C; German and English version EN 4124:2004
DIN EN 4590-2007 航空航天系列.耐腐蚀钢制钝化、自锁圆柱形螺母用、弹性金属片固定器 Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated; German and English version EN 4590:2005
DIN EN 4591-2007 航空航天系列.MoS2润滑的耐高温镍基合金不固定式自准自锁紧圆筒螺母.分类:1550MPa(室温)/315℃ Aerospace series - Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS<(Index)2> lubricated - Classification: 1550 MPa (at ambient temperature)/315 °C; German and English version EN 4591:2005
DIN EN 4610-2007 航空航天系列.钛合金8°30'管连接件.带有推力线螺母的45°弯头 Aerospace series - Pipe coupling 8° 30' in titanium alloy - Elbows 45°, with thrust wire nut; German and English version EN 4610:2005
DIN EN ISO 10484-2004 螺母的扩孔试验 Widening test on nuts (ISO 10484:1997); German version EN ISO 10484:2004
DIN EN ISO 10485-2004 螺母的锥形保证载荷试验 Cone proof load test on nuts (ISO 10485:1991); German version EN ISO 10485:2004
DIN EN ISO 10511-1998 经常作用的扭矩型六角薄型螺母(带非金属垫片) Prevailing torque type hexagon, thin nuts (with non-metallic insert) (ISO 10511:1997); German version EN ISO 10511:1997
DIN EN ISO 10512-1998 公制小螺距螺纹的1型经常作用的扭矩型六角头螺母六角螺母(带非金属垫片).特性等级6,8和10 Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:1997); German version EN ISO 10512:1997
DIN EN ISO 10513-1998 公制细螺距螺纹的2型经常施用扭矩型全金属六角头螺母. 8,10 和 12 级特性 Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:1997); German version EN ISO 10513:1997
DIN EN ISO 21670-2004 带法兰的六角头螺母 Hexagon weld nuts with flange (ISO 21670:2003); German version EN ISO 21670:2003
DIN EN ISO 2320-1998 经常作用的扭矩式钢制六角螺母.机械和功能特性 Prevailing torque type steel hexagon nuts - Mechanical and performance properties (ISO 2320:1997); German version EN ISO 2320:1997
DIN EN ISO 3506-2-1998 耐蚀钢紧固件的机械特性.第2部分:螺母 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:1997); German version EN ISO 3506-2:1997
DIN EN ISO 4032-2001 1型六角螺母.产品等级A和B Hexagon nuts, style 1 - Product grades A and B (ISO 4032:1999); German version EN ISO 4032:2000
DIN EN ISO 4033-2001 2型六角螺母.产品等级A和B Hexagon nuts, style 2 - Product grades A and B (ISO 4033:1999); German version EN ISO 4033:2000
DIN EN ISO 4034-2001 六角螺母.产品等级C Hexagon nuts - Product grade C (ISO 4034:1999); German version EN ISO 4034:2000
DIN EN ISO 4035-2001 六角薄螺母(倒角).产品等级A和B Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1999); German version EN ISO 4035:2000
DIN EN ISO 4036-2001 六角薄螺母(不倒角).产品等级B Hexagon thin nuts (unchamfered) - Product grade B (ISO 4036:1999); German version EN ISO 4036:2000
DIN EN ISO 4759-1-2001 紧固件公差.第1部分:螺栓、螺钉和垫圈和螺母.产品等级A、B和C Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
DIN EN ISO 4759-3-2000 紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.产品等级A和C Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000
DIN EN ISO 6157-2-2004 紧固件.表面缺陷.第2部分:螺母 Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004
DIN EN ISO 6789-2003 螺钉和螺母用装配工具.手动转矩工具.设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法 Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003); German version EN ISO 6789:2003
DIN EN ISO 7040-1998 1型经常作用的扭矩型六角螺母(用非金属垫圈).性能等级5,8和10 Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 (ISO 7040:1997); German version EN ISO 7040:1997
DIN EN ISO 7042-1998 2型经常作用的扭矩型六角螺母(用全金属螺母).性能等级5,8,10和12 Prevailing torque type (all-metal hexagon nuts), style 2 - Property classes 5, 8, 10 and 12 (ISO 7042:1997); German version EN ISO 7042:1997
DIN EN ISO 7719-1998 1型经常作用的扭矩型六角螺母(全金属螺母). 性能等级5,8和10 Prevailing torque type (all-metal hexagon nuts), style 1 - Property classes 5, 8 and 10 (ISO 7719:1997); German version EN ISO 7719:1997
DIN EN ISO 8673-2001 米制细牙螺纹1型六角螺母.产品等级A和B Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999); German version EN ISO 8673:2000
DIN EN ISO 8674-2001 米制细牙螺纹2型六角螺母.产品等级A和B Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999); German version EN ISO 8674:2000
DIN EN ISO 8675-2001 米制细牙螺纹六角薄螺母(倒角).产品等级A和B Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999); German version EN ISO 8675:2000
DIN EN ISO 887-2006 通用米制螺栓、螺钉和螺母用的平垫圈.一般示意图(ISO 887:2000 + Cor. 1:2006) Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000 + Cor. 1:2006) English version of DIN EN ISO 887:2000 + AC:2006-07
DIN EN ISO 898-6-1996 紧固件机械性能.第6部分:带规定试验负荷的螺母.细牙螺纹 Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995
DIN ISO 1085-2007 螺钉和螺母用装配工具.双头扳手.尺寸组配 Assembly tools for screws and nuts - Double-ended wrenches - Size pairing (ISO 1085:1999) English version of DIN ISO 1085:2007-04
DIN ISO 10897-2006 刀具夹用1:10锥度的夹头.夹头、夹柄和螺母 Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts (ISO 10897:1996)
DIN ISO 13754-2000 纺织机械和附件.纺纱和加捻锭子用六角螺母和开槽螺母 Textiles machinery and accessories - Hexagon nuts and slotted nuts for spinning and twisting spindles (ISO 13754:1999)
DIN ISO 14710-1999 农用机械和拖拉机.作物保护设备.空气辅助的喷洒器.喷嘴旋转螺母的尺寸 Agricultural machinery and tractors - Equipment for crop protection - Air-assisted sprayers; dimensions of nozzle swivel-nuts (ISO 14710:1996)
DIN ISO 15488-2006 刀具柄用8°调整角的夹头.夹头、螺母和配合尺寸 Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003)
DIN ISO 1711-1-2007 螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒(ISO 1711-1-2007) Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2007)
DIN ISO 1891-1979 紧固件.螺栓、螺钉、螺母和附件.术语和名称 Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature
DIN ISO 2351-1-2007 螺钉和螺母用装配工具.电动螺丝起子.第1部分:一字槽螺丝用螺丝起子 Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) English version of DIN ISO 2351-1:2007-04
DIN ISO 2351-2-2006 螺丝和螺母用装配工具.机器操作旋具头.第2部分:十字凹头螺钉用旋具头 Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002)
DIN ISO 2351-3-2006 螺丝和螺母用装配工具.机器操作旋具头.第3部分:六角凹头螺钉用旋具头 Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2002)
DIN ISO 2380-1-2006 螺钉和螺母用装配工具.一字槽螺钉的旋具.第1部分:手动或者机动旋具工作部 Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers (ISO 2380-1:2004)
DIN ISO 2380-2-2006 螺丝和螺母用装配工具.一字槽螺钉的旋具.第2部分:手动旋具的一般要求、刀刃长度和标记 Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
DIN ISO 262-1999 ISO一般用途米制螺纹.螺钉、螺栓和螺母的选用尺寸(ISO 262- ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
DIN ISO 2936-2001 螺钉和螺母用装配工具.内六角螺钉扳手 Assembly tools for screws and nuts - Hexagon socket screw keys (ISO 2936:2001)
DIN ISO 5855-2-1989 航空航天.MJ螺纹.第2部分:螺栓和螺母的极限尺寸; 等同采用 ISO 5855-2:1988 Aerospace; MJ threads; limit dimensions for bolts and nuts; identical with ISO 5855-2:1988
DIN ISO 691-2007 螺栓和螺母用装配工具.扳手和套筒扳手开口.通用公差 Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use (ISO 691:2005) English version of DIN ISO 691:2007-04
DIN ISO 8764-1-2006 螺钉和螺母用装配工具.十字槽头螺钉用旋具.第1部分:驱动头 Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver tips (ISO 8764-1:2004)
DIN ISO 8764-2-2006 螺丝和螺母用装配工具.十字槽头螺钉用旋具.第2部分:手动旋具的一般要求、刀刃长度和标记 Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
DIN ISO 8788-1988 航空航天.紧固件.螺母的形状和位置公差 Aerospace; fasteners; tolerances of form and position for nuts; identical with ISO 8788, edition 1987
DIN ISO 8992-2005 紧固件.螺栓、螺钉、螺柱和螺母的一般要求 Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
DIN V 4001-206-1991 计算机辅助设计标准件文档.第206部分:几何和参数规范.用特殊工具驱动的独立螺母 CAD standard parts file; specification of geometry and parameters; nuts, separate, drive with special-tool
DIN V 4001-29-1989 计算机辅助设计标准件文档.第29部分:几何和参数规范.用工具驱动的独立螺母 CAD standard parts file; specifications of geometry and parameters; nuts, separate, with drive by tool
DIN V 65900-15-1999 航空航天系列.温度等级≤425℃用自锁螺母,螺纹镶嵌件的材料 Aerospace series - Materials for self-locking nuts, threaded inserts and screw thread inserts of temperature classes 425 °C (AECMA Technical Report TR 3791:1999)
DIN V 65900-16-1998 航空航天系列.用塑料环自锁的带槽普通六角头螺母的材料 Aerospace series - Materials for plain, slotted and self-locking by plastic ring hexagonal nuts (AECMA Technical Report TR 3823:1998)
DIN V 65900-18-2001 航空航天.双六角自锁螺母.技术规范扭矩.基本计算 Aerospace series - Nuts, bihexagonal, self-locking - Torque for technical specifications - Basic calculations (AECMA Technical Report TR 4597:2000)
编号中文名称英文名称

返回