| 编号 | 中文名称 | 英文名称 |
|---|
| NF E22-308-2-2001
| 滚动轴承.附件.第2部分:锁紧螺母和锁紧装置.尺寸
| (Rolling bearings - Accessories - Part 2 : locknuts and locking devices - Dimensions.)
|
| NF E25-011-1992
| 紧固件的机械特性.由非亚铁金属制造的螺栓,螺钉,柱螺栓和螺母
| (MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).)
|
| NF E25-022-1-2001
| 紧固件公差.螺栓、螺钉、双头螺栓和螺母.第1部分:产品等级A、B及C
| (Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.)
|
| NF E25-400-1-1994
| 紧固件的机械性能.第2部分:有规定的检验载荷值的螺母.粗牙螺纹
| (Mechanical properties of fasteners. Part 2 : nuts with specified proof load values. Coarse thread.)
|
| NF E25-400-3-1992
| 紧固件.表面不连续性.螺母
| (Fasteners. Surface discontinuities. Nuts.)
|
| NF E25-400-6-1998
| 不锈钢耐腐蚀机械特性.螺母
| (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 2 : nuts.)
|
| NF E25-401-2001
| 1型六角头螺母.产品等级A和B
| (Hexagon nuts, style 1 - Product grades A and B.)
|
| NF E25-402-2001
| 六角头螺母.产品等级C
| (Hexagon nuts - Product grade C.)
|
| NF E25-405-1-2001
| 六角头薄螺母(倒角的).产品等级A和B
| (Hexagon thin nuts (chamfered) - Product grades A and B.)
|
| NF E25-405-2-2001
| 六角头薄螺母(非倒角的).产品等级B
| (Hexagon thin nuts (unchamfered) - Product grade B.)
|
| NF E25-406-1-2003
| 六角法兰面螺母.细牙螺纹
| (Hexagon nuts with flange - Fine pitch thread.)
|
| NF E25-406-1998
| 法兰六角型螺母
| (Hexagon nuts with flange.)
|
| NF E25-407-2001
| 2型六角头螺母.产品等级A和B
| (Hexagon nuts, style 2 - Product grades A and B.)
|
| NF E25-414-1998
| 带法兰的普通扭矩型全金属六角型螺母
| (Prevailing torque type all-metal hexagon nuts with flange.)
|
| NF E25-418-1991
| 电阻焊接用六角形螺母.符号HSR紧固件
| (FASTENERS. RESISTANCE WELDING HEXAGON NUTS. SYMBOL H SR.)
|
| NF E25-420-1997
| 2 型通用扭矩全金属六角螺母. 性能类别5,8,10和12
| (PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS, STYLE 2. PROPERTY CLASSES 5, 8, 10 AND 12. (EUROPEAN STANDARD EN ISO 7042).)
|
| NF E25-421-1997
| 1 型带米制小节距螺纹的通用扭矩型六角扁螺母. 性能类别6,8,10
| (PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT), STYLE 1, WITH METRIC FINE PITCH THREAD. PROPERTY CLASSES 6, 8 AND 10. (EUROPEAN STANDARD EN ISO 10512).)
|
| NF E25-422-1997
| 2型细螺距公制长效扭矩式全金属六角螺母.5,8和10类别性能
| (PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS, STYLE 2, WITH METRIC FINE PITCH THREAD. PROPERTY CLASSES 8, 10 AND 12. (EUROPEAN STANDARD EN ISO 10513).)
|
| NF E25-451-2001
| 1型米制细牙螺纹的六角头螺母.产品等级A和B
| (Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B.)
|
| NF E25-452-2001
| 2型米制细牙螺纹的六角头螺母.产品等级A和B
| (Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B.)
|
| NF E25-453-2001
| 米制细牙螺纹的六角头薄螺母(倒角的).产品等级A和B
| (Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B.)
|
| NF E25-501-2000
| 紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.A级和C级
| (Tolerances for fasteners - Part 3 : plain washers for bolts, screws and nuts - Product grades A and C.)
|
| NF E25-506-1998
| 带米制细牙螺纹法兰(非金属插口)的普通扭矩六角型螺母
| (Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread.)
|
| NF E25-507-1998
| 带米制细牙螺纹法兰的普通扭矩全金属六角型螺母
| (Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread.)
|
| NF E25-525-2000
| 通用米制螺栓、螺钉和螺母用平垫圈.一般示意图
| (Plain washers for metric bolts, screws and nuts for general purposes - General plan.)
|
| NF E25-540-2002
| 紧固件.螺母锁紧
| (Fasteners - Nut lock.)
|
| NF E25-800-3-1994
| 紧固件.波纹钢管用螺栓.第3部分:不带法兰的凸形六角螺母.产品等级C
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 3 : CONVEX HEXAGON NUTS WITHOUT FLANGE. PRODUCT GRADE C.)
|
| NF E25-800-4-1994
| 紧固件.波纹钢管用螺栓.第4部分:带法兰的凸形螺母.产品等级C
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 4 : CONVEX HEXAGON NUTS WITH FLANGE. PRODUCT GRADE C.)
|
| NF E27-000-1972
| 螺栓、螺母及附件.术语
| (Bolts, nuts and accessories.nomenclature.)
|
| NF E27-209-1976
| 小提琴上调音用蝶形螺母
| (THUMB NUT “VIOLON TYPE“.)
|
| NF E27-214-1976
| 带小提琴紧弦用的蝶形螺母锁紧螺钉
| (LOCKING SCREW WITH VIOLIN TYPE THUMB NUT.)
|
| NF E27-215-1976
| 带六角螺母的锁紧螺钉
| (LOCKING SCREWS WITH HEXAGON NUT.)
|
| NF E62-513-1997
| 刀具柄用设定有8级角夹头.夹头、螺母和配件尺寸
| (COLLETS WITH 8 DEGREES SETTING ANGLE FOR TOOL SHANKS. COLLETS, NUTS AND FITTING DIMENSIONS.)
|
| NF E74-300-1998
| 螺栓和螺母用装配工具.扳手和套筒扳手的开口.通用公差
| (Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.)
|
| NF E74-303-2001
| 螺钉和螺母组装工具.锻造的和管形套筒扳手.头部外形最大尺寸
| (Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions.)
|
| NF E74-304-2001
| 螺钉和螺母装配工具.双头开口扳手、双头环形扳手和多用扳手.端部最大宽度
| (Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches - Maximum widths of heads.)
|
| NF E74-305-2001
| 螺钉和螺母装配工具.双头扳手.尺寸选配
| (Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.)
|
| NF E74-307-2001
| 螺钉和螺母用装配工具.组合扳手.扳手长度和端口最大厚度
| (Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads.)
|
| NF E74-310-2001
| 螺钉和螺母用装配工具.工程用双头开口扳手.扳手长度和端口厚度
| (Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads.)
|
| NF E74-311-2001
| 螺钉和螺母用装配工具.双头平直套筒扳手和斜口套筒扳手.扳手长度和端口厚度
| (Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads.)
|
| NF E74-313-2001
| 螺钉和螺母用装配工具.双头深斜口套筒扳手和改进的斜口套筒扳手.扳手长度和端口厚度
| (Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads.)
|
| NF E74-321-1998
| 螺钉和螺母用装配工具.十字形套筒扳手.尺寸和扭矩试验
| (ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TORQUE TEST.)
|
| NF E74-324-2001
| 螺钉和螺母用装配工具.可调扳手
| (Assembly tools for screws and nuts - Adjustable wrenches.)
|
| NF E74-325-2003
| 螺钉和螺母用装配工具.手动转矩工具.设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法
| (Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.)
|
| NF E74-331-2003
| 螺钉和螺母用装配工具.内六角扳手
| (Assembly tools for screws and nuts - Hexagon socket screw keys.)
|
| NF E74-351-2002
| 螺钉和螺母用装配工具.一字槽头螺钉用旋具.第2部分:手工操作旋具的一般要求、刀刃长度和标记
| (Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.)
|
| NF E74-352-1998
| 螺钉和螺母用装配工具.槽螺钉用旋具.第1部分:手工及机械操作用的旋具头
| (Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.)
|
| NF E74-353-1-2002
| 螺钉和螺母用装配工具.机动旋转头.第1部分:一字槽螺钉旋具
| (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1 : screwdriver bits for slotted head screws.)
|
| NF E74-353-2-2002
| 螺钉和螺母用装配工具.机动旋转头.第2部分:十字槽螺钉旋具头
| (Assembly tools for screws and nuts - Machine-operated screwdrivers bits - Part 2 : screwdriver bits for cross-recessed head screws.)
|
| NF E74-353-3-2002
| 螺钉和螺母用装配工具.机动旋转头.第3部分:内六角螺钉用旋具头
| (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3 : screwdriver bits for hexagon socket screws.)
|
| NF E74-354-2002
| 螺钉和螺母用装配工具.螺旋棘轮螺钉旋具头.尺寸
| (Assembly tools for screws and nuts - Spiral ratchet screwdriver ends - Dimensions.)
|
| NF E74-360-2001
| 螺钉和螺母用装配工具.手动和机动螺丝刀的驱动端和连接部件.尺寸和扭矩试验
| (Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.)
|
| NF E74-361-1997
| 螺钉和螺母用装配工具.方形旋具.第1部分:手动套筒工具用方形旋具
| (Assembly tools for screws and nuts. Driving squares. Part 1 : driving squares for hand socket tools.)
|
| NF E74-362-1997
| 螺钉和螺母用装配工具.方形旋具.第2部分:电动套筒工具用方形旋具
| (Assembly tools for screws and nuts. Driving squares. Part 2 : driving squares for power socket tools.)
|
| NF E74-363-1-1997
| 螺钉和螺母用装配工具.方形传动套筒.第1部分:手动套筒.尺寸
| (Assembly tools for screws and nuts. Square drive sockets. Part 1 : hand-operated sockets. Dimensions.)
|
| NF E74-363-2-1997
| 螺钉和螺母用装配工具.方形传动套筒.第2部分:机动“冲击“套筒.尺寸
| (Assembly tools for screws and nuts. Square drive sockets. Part 2 : machine-operated sockets “impact“. Dimensions.)
|
| NF E74-363-3-2001
| 螺钉和螺母用组合工具.方形驱动套筒.第3部分:机器驱动套筒(无冲击).尺寸
| (Assembly tools for screws and nuts - Square drive sockets - Part 3 : machine-operated sockets (“non impact“) - Dimensions.)
|
| NF E74-365-1997
| 螺钉和螺母用装配工具.手动方形传动套筒扳手上的传动件.尺寸和试验
| (Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests.)
|
| NF E74-366-1997
| 螺钉和螺母用装配工具.手动方形传动套筒扳手上的附件.尺寸和试验
| (Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests.)
|
| NF E74-367-1995
| 螺钉和螺母用装配工具.机动插头扳手的方块传动加长六角插头
| (Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.)
|
| NF E74-381-1997
| 螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒
| (Assembly tools for screws and nuts. Technical specifications. Part 1 : hand-operated wrenches and sockets.)
|
| NF E84-005-1998
| 栅栏用钢线和线产品.第2部分:农业,绝缘,和栅栏用六角型钢线螺母
| (Steel wire and wire products for fences. Part 2 : hexagonal steel wire netting for agricultural, insulation and fencing purposes.)
|
| NF E84-006-1998
| 金属网用钢丝和钢丝产品.第3部分:发动机用六角型钢线螺母
| (Steel wire and wire products for fences. Part 3: hexagonal steel wire netting for engineering purposes.)
|
| NF F01-016-1971
| 铁路运输设备.带螺纹端头和有槽端头的未钻孔轴.螺母
| (RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH THREADED AND SLOTTED ENDS. NUTS.)
|
| NF F03-006-1983
| 铁路车辆.开槽懦半沉头螺钉一螺母. Ａ级. 符号ＦＢＰ
| (Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.)
|
| NF F03-007-1983
| 铁路车辆.半球形螺母和球形圆柱螺母, Ａ级, 符号Ｒ和ＣＲ
| (Railway rolling stock. Grade A. Round head and domed head nuts. Symbols R and CR.)
|
| NF F03-016-1983
| 铁路车辆.开槽沉头螺钉, 螺母. Ａ级. ＦＰ
| (Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.)
|
| NF F11-003-1970
| 铁路车辆.手制动. 螺钉和螺母. 螺距和螺纹剖面. 螺钉传动
| (RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS. PITCHES AND PROFILES. SCREW DRIVES.)
|
| NF J25-310-1969
| 造船工业.航海.船上阀门附件.带压盖和螺母的填料箱
| (SHIPBUILDING. MARINE NAVIGATION. MARINE VALVE ACCESSORIES. STUFFING BOXES WITH GLAND AND NUT.)
|
| NF J41-445-1957
| 造船工业.“金士顿“阀门.上导杆.螺母锁紧
| (SHIPBUILDING. KINGSTON VALVES. UPPER GUIDE. TAB WASHER.)
|
| NF J65-109-1958
| 造船工业.轴线.螺旋桨用带座螺母
| (SHIPBUILDING. SHAFT LINES. COLLAR NUTS FOR PROPELLERS.)
|
| NF J65-111-1958
| 造船工业.轴线.螺旋桨用普通螺母和带四个榫头的罩形螺母
| (SHIPBUILDING. SHAFT LINES. ORDINARY AND CAP PROPELLER NUTS WITH 4 LUGS.)
|
| NF J65-113-1958
| 造船工业.轴线.螺旋桨用圆螺母
| (SHIPBUILDING. SHAFT LINES. GROOVED PROPELLER NUTS.)
|
| NF J65-115-1958
| 造船工业.轴线.螺旋桨用螺母盖
| (SHIPBUILDING. SHAFT LINES. COMBINED NUTS AND SPINNERS.)
|
| NF J65-120-1958
| 造船工业.轴线.螺旋桨螺母制动原则
| (SHIPBUILDING. SHAFT LINES. PRINCIPLES FOR LOCKING OF PROPELLER NUTS.)
|
| NF J65-165-1958
| 造船工业.轴线.联轴节.轴端、制动销和螺母
| (SHIPBUILDING. SHAFT LINES. COUPLINGS. SHAFT ENDS,KEYS,NUTS.)
|
| NF J65-180-1958
| 造船工业.轴线.联轴节.镗圆锥孔凸缘机.总成.螺母锁紧板
| (SHIPBUILDING. SHAFT LINES. COUPLINGS. TAPER BORE FLANGES. GENERAL ARRANGEMENT. NUT LOCKING PLATES.)
|
| NF L05-230-2-1990
| 航空和航天.MJ螺纹.第2部分:螺栓和螺母的尺寸
| (AEROSPACE. MJ THREADS. PART 2 : LIMIT DIMENSIONS FOR BOLTS AND NUTS.)
|
| NF L20-030-1996
| 航空航天系列.带柄螺母.60度型铁法兰安装孔.设计标准(欧洲标准EN 3149)
| (AEROSPACE SERIES. SHANK NUTS. INSTALLATION HOLES, 60 DEGREES SWAGE, FLANGES. DESIGN STANDARD. (EUROPEAN STANDARD EN 3149).)
|
| NF L22-040-1956
| 航空螺栓螺母.使用公差.国际单位制螺纹
| (AIRCRAFT FASTENERS. MANUFACTURING TOLERANCES. (RECH.).)
|
| NF L22-063-1970
| 用板手操作的螺母、螺钉和轴的间隙
| (CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.)
|
| NF L22-236-1989
| 航空用螺栓螺母.十二角头螺钉.使用温度在高于235℃
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.)
|
| NF L22-237-1989
| 航空用螺栓螺母.带锁紧孔十二角头螺钉.使用温度在高于235℃
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.)
|
| NF L22-246-1989
| 航空用螺栓螺母.十二角头螺钉.细螺距.使用温度高于在２３５℃
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.)
|
| NF L22-247-1989
| 航空用螺检螺母.十二角头螺钉.细螺距带锁紧孔.使用温度在高于２３５℃以上
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS. FINE PITCH.)
|
| NF L22-251-1968
| 航空用ISO螺纹螺拴螺母.AICMA十字槽“通用”１００°沉头螺钉
| (GENERAL PURPOSE 100 DEGREES COUNTERSUNK HEAD SCREWS WITH A.I.C.M.A. CROSS RECESS.)
|
| NF L22-252-1968
| 航空用螺拴螺母.短螺纹精密螺钉.AICMA十字槽１００°埋头螺钉
| (PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,A.I.C.M.A. CROSS RECESS.)
|
| NF L22-256-1966
| 航空用螺拴螺母.AICMA十字槽全螺纹１００°埋头螺钉.ISO螺纹
| (AIRCRAFT FASTENERS. 100 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED,A.I.C.M.A. CROSS RECESS.)
|
| NF L22-257-1982
| 航空用螺拴螺母.BNAE 十字槽“通用”１００°埋头螺钉.ISO螺纹
| (General purpose 100 degrees countersunk head screws,B.N.A.E. Cross recess. ISO thread.)
|
| NF L22-258-1967
| 航空用螺拴螺母.BNAE 十字槽１００°短螺纹精密埋头螺钉
| (AIRCRAFT FASTENERS. PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,B.N.A.E. CROSS RECESS.)
|
| NF L22-259-1982
| 航空用螺拴螺母.BNAE 十字槽１００°全螺纹埋头螺钉.ISO螺纹
| (100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.)
|
| NF L22-271-1966
| 航空用螺拴螺母.AICMA 十字槽半圆头螺钉
| (AIRCRAFT FASTENERS. PAN HEAD SCREWS,WITH A.I.C.M.A. CROSS RECESS.)
|
| NF L22-272-1966
| 航空用ISO螺纹螺拴螺母.AICMA 十字槽全螺纹半圆头螺钉
| (AIRCRAFT FASTENERS. PAN HEAD SCREWS,FULLY THREADED,WITH A.I.C.M.A. CROSS RECESS.)
|
| NF L22-273-1966
| 航空用螺拴螺母.十字槽锥顶半圆头非磁性螺钉
| (AIRCRAFT FASTENERS. NON-MAGNETIC PAN HEAD SCREWS WITH TRUNCATED CONE POINT. CROSS RECESS.)
|
| NF L22-274-1982
| 航空用螺拴螺母.BNAE十字槽半圆头螺钉.ISO螺纹
| (Pan head screws,B.N.A.E. Cross recess. ISO thread.)
|
| NF L22-275-1982
| 航空用螺拴螺母.BNAE十字槽全螺纹半圆头螺纹钉.ISO螺纹
| (Pan head screws, fully threaded,B.N.A.E. Cross recess. ISO thread.)
|
| NF L22-277-1968
| 航空用螺拴螺母.温度在260℃以上用全螺纹紧旋圆柱头螺钉
| (DRILLED CHEESE HEAD SCREWS,FULLY THREADED,FOR TEMPERATURES ABOVE 260 DEGREES C.)
|
| NF L22-411-1973
| 国际单位制螺纹标准六角螺母
| (ORDINARY HEXAGON NUTS. SIM THREAD. (RECH.).)
|
| NF L22-412-1973
| 国际单位制螺纹轻六角螺母
| (HEXAGON REDUCED NUTS. SIM THREAD. (RECH.).)
|
| NF L22-413-1973
| 国际单位制螺扁六角螺母
| (HEXAGON THIN NUTS. SIM THREAD. (RECH.).)
|
| NF L22-420-1954
| 航空用螺拴螺母.冠形厚六角螺母
| (AIRCRAFT FASTENERS. HEXAGON THICK CASTLE NUTS. (RECH.).)
|
| NF L22-425-1954
| 航空用螺拴螺母.冠形扁六角螺母
| (AIRCRAFT FASTENERS. HEXAGON THIN CASTLE NUTS. (RECH.).)
|
| NF L22-431-2000
| 航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.ISO M或ISO MJ螺纹.根据直径4H5H或5H的Ⅱ类公差
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-432-2000
| 航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.左旋ISO螺纹.根据直径４H５H或５H的Ⅱ类公差
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-433-2000
| 航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.ISO M或ISO MJ螺纹４H公差等级
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.)
|
| NF L22-434-2000
| 航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.ISO螺纹左旋４H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
|
| NF L22-435-2000
| 带标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径4H5H或5H进行公差分类
| (Nuts, hexagonal, plain, reduced height, normal across flats, ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-436-2000
| 航空用螺栓和螺母.带标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.接直径４H５H或5H进行公差分类
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-437-2000
| 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径4H5H或5H进行公差分类
| (Aircraft bolts and nuts - Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-438-2000
| 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.接直径4H５H或５H进行公差
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-439-2000
| 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.４H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.)
|
| NF L22-440-2000
| 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.４H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
|
| NF L22-441-2000
| 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径5H4H或４H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-442-2000
| 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.按直径5H4H或４H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-443-2000
| 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径5H4H或４H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-444-2000
| 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.按直径5H4H或４H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-451-2000
| 航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.标准厚度.ISO M或ISO MJ螺纹.按直径４H５H或５H进行公差分类
| (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-453-2000
| 航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.ISO M或ISO MJ螺纹.按直径４H５H或５H进行公差分类
| (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.)
|
| NF L22-455-2000
| 航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.ISO M或ISO MJ螺纹.４H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.)
|
| NF L22-457-2000
| 航空用螺栓和螺母.槽顶(有槽)普通厚度六角头螺母.ISO M或ISO MJ螺纹.４H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.)
|
| NF L22-458-2000
| 航空用螺栓和螺母.槽顶(有槽)普通厚度六角头螺母.左旋ISO M或ISO MJ螺纹.４H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.)
|
| NF L22-461-2000
| 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头螺母.ISO M或ISO MJ细牙螺纹.４H５H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.)
|
| NF L22-462-2000
| 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头螺母.左旋ISO M或ISO MJ细牙螺纹.４H５H公差级
| (Aircraft bolts and nuts - Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.)
|
| NF L22-500-2001
| 紧固件.最高使用温度小于或等于425℃的自锁紧螺母.技术要求
| (Fasteners - Nuts, self-locking, with maximum operating temperature less than or equal to 425 o - Technical requirements.)
|
| NF L22-500M1-1974
| 425℃以下温度用内锁紧螺母.产品标准
| ()
|
| NF L22-510-1954
| 航空用螺拴螺母.温度在３００℃以下用自锁紧螺母
| (AIRCRAFT FASTENERS WITH SIM THREAD. SELF-LOCKING HEXAGON NUTS FOR TEMPERATURES BELOW 300 DEGREES C. (RECH.).)
|
| NF L22-512-2001
| 航空螺栓和螺母.MoS2润滑的、镀镉、钢制、带扩孔和系留垫圈的、ISO M或ISO MJ螺纹的自锁定六角螺母.等级:11
| (Aircraft bolts and nuts - Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambian)
|
| NF L22-517-1980
| E-26 NCT 25 不锈钢制内紧锁十二角头螺母.ISO螺纹
| (12 point self-locking flange nuts, in E-Z 6 nct 25 corrosion resisting steel. ISO thread.)
|
| NF L22-518-1966
| 航空用螺拴螺母.内锁紧十二角头厚螺母.温度级：５００℃、７００℃、８００℃
| (AIRCRAFT FASTENERS. 12 POINT THICK FLANGE NUTS,SELF-LOCKING. TEMPERATURE CLASSES : 500,700,800 DEGREES C.)
|
| NF L22-519-2000
| 航空用螺栓和螺母.自锁十二角头螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1550MPa(室温)/235℃
| (Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 oC.)
|
| NF L22-522-1966
| 航空用螺拴螺母.细螺距内锁紧十二角头厚螺母.温度级:５００℃、７００℃、８００℃
| (AIRCRAFT FASTENERS. 12 POINT THICK FLANGE NUTS,SELF-LOCKING,FINE PITCH. TEMPERATURE CLASSES : 500,700,800 DEGREES C.)
|
| NF L22-524-1969
| 航空用ISO螺纹螺拴螺母.细螺距内锁紧十二角头螺母.温度级：６５０℃
| (NUT-DOUBLE HEXAGON, SELF LOCKING, FINE PITCH THREADS, FOR TEMPERATURES UP TO 650 DEGREES CELSIUS.)
|
| NF L22-525-2001
| 航空螺栓和螺母.钢制、镀镉、MoS2润滑的、细螺距螺纹、ISO M螺纹、自锁紧双六角头螺母.等级:1100MPa(室温)/
| (Aircraft bolts and nuts - Nuts, bihexagonal, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC.)
|
| NF L22-531-1977
| E-２６NCT２５不锈钢制内锁紧嵌入螺母.ISO螺纹
| (SELF-LOCKING CLINCH NUTS,IN E-Z 6 NCT 25 CORROSION RESISTING STEEL. ISO THREAD.)
|
| NF L22-533-1975
| 埋头内锁紧系留螺母.双耳.米制螺纹
| (SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,TWO LUGS. SIM THREAD. (RECH.).)
|
| NF L22-534-1975
| 埋头内锁紧系留螺母.双耳多孔.国际单位米制螺纹
| (Self-locking anchor nuts, countersunk type, two lugs with countersunk rivet holes. Sim thread (rech.).)
|
| NF L22-535-1975
| 埋头内锁紧系留螺母.单耳单孔.国际单位米制螺纹
| (Self-locking anchor nuts, countersunk type, single lug with one hole. Sim thread (rech.).)
|
| NF L22-536-1975
| 埋头内锁紧系留螺母.单耳双埋孔.国际单位米制螺纹
| (Self-locking anchor nuts, countersunk type, single lug with countersunk rivet hole. Sim thread (rech.).)
|
| NF L22-537-1975
| 埋头内锁紧系留螺母.单耳双埋孔.国际单位米制螺纹
| (Self-locking anchor nuts, countersunk type, single lug with two holes. Sim thread (rech.).)
|
| NF L22-538-1975
| 埋头内锁紧系留螺母.单耳双埋孔.国际单位米制螺纹
| (Self-locking anchor nuts, countersunk type, single lug with two countersunk rivet holes. Sim thread (rech.).)
|
| NF L22-540-1954
| 内锁紧系留螺母带
| (GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT. (RECH.).)
|
| NF L22-541-2001
| 航空螺栓和螺母.钢制、镀镉、MoS2润滑的、ISO M或ISO MJ螺纹自锁紧六角头螺母.等级:1100MPa(室温)/235℃或
| ()
|
| NF L22-542-1966
| 航空用螺拴螺母.内锁紧六角螺母.最高温度：１２０℃
| (AIRCRAFT FASTENERS. SELF-LOCKING HEXAGON NUTS. MAXIMUM TEMPERATURE : 120 DEGREES C.)
|
| NF L22-543-1975
| 内锁紧系留螺母.双耳.国际单位米制螺纹
| (Self-locking anchor nuts, two lugs. Sim thread (rech.).)
|
| NF L22-544-1975
| 内锁紧系留螺母.双耳.多埋孔.国际单位米制螺纹
| (Self-locking anchor nuts, two lugs with countersunk rivet holes. Sim thread (rech.).)
|
| NF L22-545-1975
| 内锁紧系留螺母.单耳单孔.国际单位米制螺纹
| (Self-locking anchor nuts, single lug with one hole. Sim thread (rech.).)
|
| NF L22-546-1975
| 内锁紧系留螺母.单耳单埋孔.国际单位米制螺纹
| (Self-locking anchor nuts, single lug with countersunk rivet hole. Sim thread (rech.).)
|
| NF L22-547-1975
| 内锁紧系留螺母.单耳双孔.国际单位米制螺纹
| (Self-locking anchor nuts, single lug with two holes. Sim thread (rech.).)
|
| NF L22-548-1975
| 内锁紧系留螺母.单耳双埋孔.国际单位米制螺纹
| (Self-locking anchor nuts, single lug with two countersunk rivet holes. Sim thread (rech.).)
|
| NF L22-551-1985
| 双耳内锁紧系留螺母.分类MPa１２３５℃和４２５℃.ISO螺纹
| (Self-locking anchor nuts, two lugs classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
|
| NF L22-552-1985
| 单耳双孔内锁紧系留螺母.分类９００MPa１２３５℃和１２５℃.ISO螺纹
| (Self-locking anchor nuts, single lug with two holes. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
|
| NF L22-553-1985
| ９０度角内锁紧系留螺母.分类900 MPa / 235℃425℃ .ISO螺纹
| (Self-locking anchor nuts, 90 degrees corner classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
|
| NF L22-555-1985
| 双耳内锁紧系留扁螺母.分类900 MPa / 235℃ 和425℃ .ISO螺纹
| (Self-locking anchor nuts, miniature series, two lugs. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
|
| NF L22-556-1985
| 单耳内锁紧系留扁螺母.分类900 MPa / 235℃ 和425℃ .ISO螺纹
| (Self-locking anchor nuts, miniature series, single lug. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
|
| NF L22-558-1966
| 航空用螺拴螺母.内锁紧系留螺母.埋头型，双耳.最高温度：２６０℃--４２５℃
| (AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE WITH TWO LUGS. MAXIMUM TEMPERATURE : 260 DEGREES C - 425 DEGREES C.)
|
| NF L22-559-1966
| 航空用螺拴螺母.内锁紧系留螺母.埋头型、单耳双孔.最高温度:２６０℃-４２５℃
| (AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,SINGLE LUG WITH TWO HOLES. MAXIMUM TEMPERATURE : 260 DEGREES C - 425 DEGREES C.)
|
| NF L22-560-1966
| 航空用ISO螺纹螺拴螺母.内锁紧系留螺毋.９０度角埋头型.最高温度：２６０℃-２５℃
| (AIRCRAFT FASTENERS. SELF-LOCKING ANCHOR NUTS,COUNTERSUNK TYPE,90 DEGREES ANGLE. MAXIMUM TEMPERATURE : 260 DEGREES C - 425 DEGREES C.)
|
| NF L22-561-1985
| 双耳浮动型内锁紧系留螺母.分类900 MPa /235℃和425℃ .ISO螺纹
| (Self-locking anchor nuts, floating, two lugs classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
|
| NF L22-562-1985
| 单耳双孔浮动型自锁紧系留螺母.分类900 MPa / 235℃忖和425℃ .ISO螺纹
| (Self-locking anchor nuts, floating, single lug with two holes. Classification 900 MPa/235 degrees C and 425 degrees C. ISO thread.)
|
| NF L22-565-1979
| 内锁紧系留螺母带.深槽最高使用温度１２０℃.ISO螺纹
| (GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT,DEEP COUNTERBORE. MAXIMUM TEMPERATURE : 120 DEGREES C. ISO THREAD.)
|
| NF L22-566-1979
| 自锁紧系留螺母带.深槽.最高使用温度２３５℃.ISO螺纹
| (GANG CHANNEL SELF-LOCKING NUTS,STRAIGHT,DEEP COUNTERBORE. MAXIMUM TEMPERATURE : 235 DEGREES C. ISO THREAD.)
|
| NF L22-567-2001
| 航空螺栓和螺母.钢制、镀镉、MoS2润滑的、ISO M或ISO MJ螺纹、带扩孔的双耳自锁紧固定螺母.等级:1100MPa(室
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature)
|
| NF L22-568-2000
| 航空用螺栓和螺母.单耳埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperat)
|
| NF L22-569-2000
| 航空用螺栓和螺母.90度角埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M ou ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempeer)
|
| NF L22-570-2000
| 航空用螺栓和螺母.60度角埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempera)
|
| NF L22-571-2000
| 航空用螺栓和螺母.双耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2
| (Aircraft bolts and nuts - Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at am)
|
| NF L22-572-2000
| 航空用螺栓和螺母.单耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at)
|
| NF L22-573-2000
| 航空用螺栓和螺母.90度角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at)
|
| NF L22-574-2000
| 航空用螺栓和螺母.锐角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa ()
|
| NF L22-575-2000
| 航空用螺栓和螺母.双耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient t)
|
| NF L22-576-2000
| 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambien)
|
| NF L22-577-2000
| 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 M)
|
| NF L22-587-2000
| 航空用螺栓和螺母.双耳埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/235
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M ou ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperatu)
|
| NF L22-588-2000
| 航空用螺栓和螺母.镀银不锈钢制深槽单耳内锁紧系留螺母.ISO M或ISO MJ螺纹.分类:1100 MPa/425度(室温下)
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper)
|
| NF L22-589-2000
| 航空用螺栓和螺母.90度角埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/23
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient tempe)
|
| NF L22-590-2000
| 航空用螺栓和螺母.60度角埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/42
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M ou ISO MJ threads,in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper)
|
| NF L22-591-2000
| 航空用螺栓和螺母.双耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated - Classification : 1 100 MPa (at a)
|
| NF L22-592-2000
| 航空用螺栓和螺母.单耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (a)
|
| NF L22-593-2000
| 航空用螺栓和螺母.90度角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa ()
|
| NF L22-594-2000
| 航空用螺栓和螺母.锐角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa)
|
| NF L22-595-2000
| 航空用螺栓和螺母.双耳扁埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa
| (Aircraft bolts and nuts - Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient)
|
| NF L22-596-2000
| 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/
| (Aircraft bols and nuts - Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambien)
|
| NF L23-352-1974
| 航空用螺拴螺母.翼板销紧垫圈
| (Tab washers with long tab.)
|
| NF L24-008-1996
| 航空航天系列.自锁锯齿柄螺母.安装方法
| (Aerospace series. Shank nuts, self-locking, serrated. Installation procedure.)
|
| NF L24-009-1996
| 航空航天系列.自锁紧锯齿柄螺母用安装孔.设计标准(欧洲标准EN 3065)
| (Aerospace series. Installation holes for self-locking, serrated shank nuts. Design standard.)
|
| NF L24-225-1996
| 航空航天.加高螺母用耐高温镍基合金NI-P101HT(WASPALOY)中长螺纹紧公差十二角螺丝钉.分类:1210Mpa(室温)/73
| (Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), for increased height nuts. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-410-1997
| 航空和航天系列.耐热钢FE PA2601(A286)制自锁定MJ螺纹螺母.技术规范.等级:1100MPa(室温)/650℃(欧洲标准EN
| (AEROSPACE SERIES. NUTS, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286). CLASSIFICATION : 1100 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 3004).)
|
| NF L24-421-1994
| 航空和航天系列.镀银耐热钢FE PA92HT(A286)用六角,自锁定螺母.分类.1100MPa(室温)/425℃
| (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 1100 MPA (at AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3196).)
|
| NF L24-469-1997
| 航空和航天系列.合金钢镀镉MOS2润滑深锪孔双耳锁紧浮动地脚螺母.等级:900MPa/235℃(欧洲标准EN 2264)
| (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2264).)
|
| NF L24-471-1989
| 航空和航天系列.内固定内深锪孔双耳锁紧螺母.分类.1100MPa/235℃
| (AEROSPACE SERIES. NUTS,ANCHOR,SELF LOCKING,FIXED,TWO LUG,REDUCED SERIES,WITH COUNTERBORE. CLASSIFICATION : 1100 MPA/235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2752).)
|
| NF L24-472-1996
| 航空和航天系列.带埋头孔的固定锚式单耳自锁镀镉合金钢MOS2润滑螺母.分类.1100MPa(环境温度)/235℃
| (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICAITON : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2753).)
|
| NF L24-507-1995
| 航空和航天.自锁镀隔合金钢MOS*2制坡面垫平用润滑六角螺母.等级900MPa/235℃
| (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2647).)
|
| NF L24-508-1996
| 航空和航天.钝化耐高温钢制小板手开口度平面六角螺母.等级:600MPa(室温下)/650℃
| (AEROSPACE SERIES. NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 4069).)
|
| NF L24-509-1996
| 航空和航天.耐高温钢制FE-PA92HT(A286)自锁定六角螺母.分类:1100Mpa(室温下)/425℃
| (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION: 1100 MPA (at AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3377).)
|
| NF L24-510-1996
| 航空和航天.MOS2涂覆的耐高温钢制FE-PA92HT(A286)自锁定六角螺母.分类:1100Mpa(室温下)/425℃
| (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), MOS2 COATED. CLASSIFICATION : 1100 MPA (at AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3723).)
|
| NF L24-511-2001
| 航空航天系列.镀银、耐热钢制、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃
| (Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification : 900 MPa (at ambient temperature) / 650 o C.)
|
| NF L24-512-2001
| 航空航天系列.钝化、耐热钢制、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃
| (Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification : 900 MPa (at ambient temperature) / 650 o C.)
|
| NF L24-513-2001
| 航空航天系列.钢制、镀镉、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/235℃
| (Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in steel, cadmium plated - Classification : 900 MPa (at ambient temperature) / 235 o C.)
|
| NF L24-600-1988
| 航空和航天.最高温度超过425℃时使用的螺母.检测和试验方法
| (AEROSPACE. SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C. TEST METHODS.)
|
| NF L24-601-1990
| 航空和航天.有覆层或无覆层自锁式六角形MJ螺纹螺母.类别为1100MPa/235℃,1100MPa/315℃或者1100MPa/425℃.
| (AEROSPACE. NUTS,HEXAGONAL,SELF-LOCKING,WITH MJ THREADS,COATED OR UNCOATED,CLASSIFICATION 1100 MPA/235 DEGREES C,1100 MPA/315 DEGREES C OR 1100 MPA/425 DEGREES C. DIMENSIONS.)
|
| NF L24-664-1996
| 航空和航天.HI-P101HT耐高热镍基合金自锁十二角螺母.等级:1210Mpa(室温下)/730℃
| (AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION: 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3012).)
|
| NF L24-665-1996
| 航空航天系列.镀银HI-P101HT耐高热镍基合金自锁十二角螺母.分类:1210MPA(室温下)/730℃
| (AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3013).)
|
| NF L24-666-1996
| 航空航天系列.镀银螺纹NI-P101HT耐高热镍基合金制自锁十二角螺母.分类:1210MPA(室温下)/730℃
| (AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED THREAD. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3239).)
|
| NF L24-669-1994
| 航空和航天系列.耐热钢FE-PA92HT(A286)用双六角,自锁定,具有深锁口的螺母.分类.1100MPa(室温)/650℃
| (Aerospace series. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-672-1994
| 航空和航天系列.耐热钢FE-PA92HT(A286)用双六角,自锁定螺母.分类.1100MPa(室温)/650℃
| (Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-673-1996
| 航空航天系列.镀银FE-PA92HT(A286)耐热钢自锁十二角螺母.分类:1100MPa(室温下)/650℃
| (Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-675-1994
| 航空和航天系列.耐热钢FE-PA92HT用自锁定螺钉体螺母.分类.1100MPa(室温)/650℃
| (Aerospace series. Shank nuts, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-684-2001
| 航空航天系列.耐热钢FE-PA2601(A286)制锯齿形自锁紧带柄螺母.等级:1100MPa(室温)/650℃
| (Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa (at ambient temperature) / 650 o C.)
|
| NF L24-685-2001
| 航空航天系列.耐热钢FE-PA2601(A286)制锯齿形镀银自锁紧带柄螺母.等级:1100MPa(室温)/650℃
| (Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) silver plated - Classification : 1 100 MPa (at ambient temperature) / 650 o C.)
|
| NF L43-212-1973
| 环形接头用连接螺母
| (UNION NUTS FOR CYLINDRICAL UNION.)
|
| NF L43-371-2002
| 航空航天系列.8°30'钛合金管联接件.带推进线螺母的90°弯头
| (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o with thrust wire nut.)
|
| NF L43-373-2002
| 航空航天系列.8°30'钛合金管联接件.带推进线螺母的90°弯头焊接端
| (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, welded end with thrust wire nut.)
|
| NF L43-377-2002
| 航空航天系列. 8°30'钛合金管联接件.带推进线螺母的45°焊接端
| (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded end with thrust wire nut.)
|
| NF L43-380-2002
| 航空航天系列. 8°30'钛合金管联接件.带推进线螺母的三通
| (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees branch with thrust wire nut.)
|
| NF L43-381-2002
| 航空航天系列.8°30'钛合金管联接件.端部带推进线螺母的三通
| (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees with thrust wire nut on run.)
|
| NF L43-384-2002
| 航空航天系列.8°30'钛合金管联接件.推进线螺母
| (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Thrust wire nut.)
|
| NF L43-385-2002
| 航空航天系列.8°30'钛合金管联接件.焊接卡套用螺母
| (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Nut for welded ferrule.)
|
| NF L43-386-2002
| 航空航天系列.8°30'钛合金管联接件.隔壁直通螺母
| (Aerospace series - Pipe coupling in titanium alloy - Bulkhead nuts.)
|
| NF L43-400-2002
| 航空航天系列.8°30'钛合金管联接件.端部带推进线螺母的减径三通
| (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced with thrust wire nut on run.)
|
| NF L46-334-2002
| 航空航天系列.8°30'管接头.螺母防护帽
| (Aerospace series - Pipe coupling 8 o30' - Protective caps.)
|
| NF L87-125-1955
| 螺旋桨.紧固螺母
| (PROPELLER HUBS. LOCKNUTS.)
|
| NF P22-468-1987
| 金属结构.可控拉紧螺栓连接.螺母控制旋转拉紧.旋转角测定
| (Steel construction. Bolted joints with controlled tightening. Tightening by controlled turn of nut. Determination of the angle of rotation.)
|
| NF R12-775-1987
| 运输汽车车轮.轴和固定螺母
| (ROAD VEHICLES. WHEELS FOR COMMERCIAL VEHICLES. ATTACHEMENT STUD AND NUT.)
|
| NF R61-301-1978
| 自行车用六角螺母和板手
| (HEXAGONAL NUTS AND SPANNERS FOR CYCLES.)
|
| NF R93-183-1980
| 电阻电焊钢螺钉、螺栓和螺母机械特性
| (MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.)
|
| NF U26-136-1997
| 作物保护设备.空气喷雾机械.喷嘴旋转螺母的尺寸
| (EQUIPMENT FOR CROP PROTECTION. AIR-ASSISTED SPRAYERS. DIMENSIONS OF NOZZLE SWIVEL NUTS.)
|
| 编号 | 中文名称 | 英文名称 |
|---|