编号 | 中文名称 | 英文名称 |
BS 1600-1991
| 石油工业用钢管尺寸规范
| Specification for dimensions of steel pipe for the petroleum industry
|
BS 1640-1-1962
| 石油工业用钢对焊管管件规范.第1部分:锻制碳钢与铁素体合金钢管件
| Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought carbon and ferritic alloy steel fittings
|
BS 1640-2-1962
| 石油工业用钢质对接焊管配件规范.锻制和铸制奥氏体铬镍钢配件
| Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings
|
BS 1640-4-1968
| 石油工业用钢对焊管管件规范.第4部分:锻造和铸造奥氏体铬镍钢管件:米制单位
| Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings - Metric units
|
BS 1868-1975
| 石油、石化及联合企业用钢制单向阀(有法兰及对焊端)规范
| Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
|
BS 1873-1975
| 石油、石化及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范
| Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
|
BS 2000-0-0.2-1996
| 石油及其产品试验方法.IP标准参考液体规范
| Methods of test for petroleum and its products. Specifications for IP standard reference liquids
|
BS 2000-0.1-1999
| 石油及其产品的试验方法.一般介绍.规范.IP标准温度计
| Methods of test for petroleum and its products - General introduction - Specifications - IP Standard thermometers - Section 0.1: Specifications - IP standard for thermometers
|
BS 2000-0.2-1996
| 石油及其产品的试验方法.一般说明.IP(英国石油学会)标准参照液规范
| Methods of test for petroleum and its products - General introduction - Specifications for IP standard reference liquids
|
BS 2000-0.4-1996
| 石油及其产品的试验方法.一般说明.气压校正值
| Methods of test for petroleum and its products - General introduction - Barometric pressure corrections
|
BS 2000-1-1995
| 石油和石油产品的试验方法.酸度、中和值的测定.颜色指试剂滴定法
| Methods of test for petroleum and its products - Determination of acidity, neutralization value - Colour indicator titration method
|
BS 2000-10-1995
| 石油和石油产品的试验方法.煤油燃烧特性的测定.24小时试验法
| Methods of test for petroleum and its products - Determination of kerosine burning characteristics - 24 hour method
|
BS 2000-107-1993
| 石油及其制品的试验方法.硫的测定.灯燃法
| Methods of test for petroleum and its products - Determination of sulfur - Lamp combustion method
|
BS 2000-112-2005
| 石油及其产品的试验方法.测定润滑脂对铜腐蚀性.铜片法
| Methods of test for petroleum and its products - Part 112: Determination of corrosiveness to copper of lubricating grease - Copper strip method (Identical with IP 112:2005)
|
BS 2000-12-1993
| 石油和石油产品的试验方法.能量比耗的测定
| Methods of test for petroleum and its products - Determination of specific energy
|
BS 2000-121-2005
| 石油及其产品的试验方法.从润滑脂中分离油的测定.压力过滤法
| Methods of test for petroleum and its products - Part 121: Determination of oil separation from lubricating grease - Pressure filtration method (Identical with IP 121:2005)
|
BS 2000-129-2003
| 石油及其产品的试验方法.溴值的测定.颜色指示剂滴定法
| Methods of test for petroleum and its products - Part 129: Determination of bromine number - Colour indicator titration method (Identical with IP 129:2003)
|
BS 2000-13-1994
| 石油及其产品的试验方法.石油产品.碳渣的测定.康拉逊法
| Methods of test for petroleum and its products - Petroleum products - Determination of carbon residue - Conradson method
|
BS 2000-130-1998
| 石油及石油产品的试验方法.石油产品.第130部分:蒸馏产品和脂肪族烯烃溴值测定.静电计法
| Methods of test for petroleum and its products - Petroleum products - Determination of bromine number of distillates and aliphatic olefins - Electrometric method
|
BS 2000-132-1996
| 石油和石油产品试验方法.石油产品.第132部分.润滑脂.滴点测定
| Methods of test for petroleum and its products - Petroleum products - Lubricating grease - Determination of dropping point
|
BS 2000-133-1993
| 石油和石油产品的试验方法.石蜡和石蜡油滴熔点的测定
| Methods of test for petroleum and its products - Determination of drop melting point of wax and petrolatum
|
BS 2000-136.1-1998
| 石油及其制品的试验方法.皂化值测定.颜色指示剂滴定法
| Methods of test for petroleum and its products - Determination of saponification number - Colour-indicator titration method - Section 136.1: Colour-indicator titration method
|
BS 2000-136.2-1999
| 石油及其制品的试验方法.皂化值的测定.电位滴定法
| Methods of test for petroleum and its products - Determination of saponification number - Potentiometric titration method - Section 136.2: Potentiometric titration method
|
BS 2000-137-1993
| 石油和石油产品的试验方法.水混合金属加工油稀释液中油含量的测定
| Methods of test for petroleum and its products - Determination of oil content of water mix metalworking oil dilutions
|
BS 2000-138-2005
| 石油及其产品的试验方法.航空燃料氧化稳定性的测定.潜在残留物法
| Methods of test for petroleum and its products - Determination of oxidation stability of aviation fuel - Potential residue method
|
BS 2000-139-1998
| 石油及石油产品试验方法.第220部分:石油产品和润滑剂.酸值或碱值测定.颜色指示剂滴定法
| Methods of test for petroleum and its products - Petroleum products and lubricants - Determination of acid or base number - Colour-indicator titration method
|
BS 2000-14-1994
| 石油及其产品的试验方法.石油产品.碳渣测定.用Ramsbottom法(测定油中残炭含量)
| Methods of test for petroleum and its products - Petroleum products - Determination of carbon residue - Ramsbottom method
|
BS 2000-142-1993
| 石油和石油产品的试验方法.润滑脂氧化稳定性的测定.氧弹法
| Methods of test for petroleum and its products - Determination of oxidation stability of lubricating grease - Oxygen bomb method
|
BS 2000-143-2004
| 石油及其产品的试验方法.原油和石油产品中沥青烯(正庚烷不熔物)的测定
| Methods of test for petroleum and its products - Part 143: Determination of asphaltenes (heptane insolubles)in crude petroleum and petroleum products (Identical with IP 143:2004)
|
BS 2000-149-1993
| 石油和石油产品的试验方法.石油产品.润滑油和添加剂.磷含量的测定.喹啉磷钼酸盐法
| Methods of test for petroleum and its products - Part 149. Petroleum products - Lubricating oils and additives - Determination of phosphorus content - Quinoline phosphomolybdate method (Identical with IP 149/93)
|
BS 2000-15-1995
| 石油和石油产品试验方法.第15部分:产品倾点测定
| Methods of test for petroleum and its products - Petroleum products - Determination of pour point
|
BS 2000-163-1996
| 石油和石油产品试验方法.石油产品.第163部分:润滑油和添加剂.硫酸盐灰分测定
| Methods of test for petroleum and its products - Petroleum products - Lubricating oils and additives - Determination of sulfated ash
|
BS 2000-168-2003
| 石油及其产品试验方法.润滑脂滚动轴承性能测定
| Methods of test for petroleum and its products - Part 168: Determination of rolling bearing performance of lubricating grease (Identical with IP 168:2003)
|
BS 2000-179-1993
| 石油和石油产品的试验方法.石蜡油的锥入度测定
| Methods of test for petroleum and its products - Determination of cone penetration of petrolatum
|
BS 2000-182-2006
| 石油及其产品的试验方法.石油产品无机酸度测定.颜色指示剂滴定法
| Methods of test for petroleum and its products - Part 182: Determination of inorganic acidity of petroleum products - Colour indicator titration method (Identical with IP 182:2006)
|
BS 2000-19-2003
| 石油及其产品的试验方法.润滑油的反乳化性能测定
| Methods of test for petroleum and its products - Part 19: Determination of demulsibility characteristics of lubricating oil (Identical with IP 19:2003)
|
BS 2000-195-1998
| 石油和石油产品的试验方法.挥发有机液体蒸馏特性的测定
| Methods of test for petroleum and its products - Determination of distillation characteristics of volatile organic liquids
|
BS 2000-196-1997
| 石油和石油产品的试验方法.石油产品.颜色的测定(ASTM标度)
| Methods of test for petroleum and its products - Petroleum products - Determination of colour (ASTM scale)
|
BS 2000-1998
| 石油及其产品的试验方法.挥发性有机液体蒸馏特性的测定
| Methods of test for petroleum and its products. Determination of distillation characteristics of volatile organic liquids
|
BS 2000-2-1998
| 石油及其产品的试验方法.石油产品和烃类溶剂.苯胺点和混合苯胺点的测定.
| Methods of test for petroleum and its products - Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point
|
BS 2000-213-1993
| 石油和石油产品的试验方法.沥青的中和值的测定.颜色指示剂滴定法
| Methods of test for petroleum and its products - Determination of neutralization value of bitumen - Colour indicator titration method
|
BS 2000-220-1998
| 石油及石油产品试验方法.第220部分:石油产品和润滑剂.润滑脂防锈特性测定
| Methods of test for petroleum and its products - Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases
|
BS 2000-223-1993
| 石油和石油产品的试验方法.含矿物质的石油产品的灰分测定
| Methods of test for petroleum and its products - Determination of ash of petroleum products containing mineral matter
|
BS 2000-272-2002
| 石油和石油产品的试验方法.液化石油气(LPG)的硫醇式硫和硫化氢含量的测定.电位滴定法
| Methods of test for petroleum and its products - Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG) - Electrometric titration method
|
BS 2000-276-1995
| 石油和石油产品试验方法.第276部分:石油产品.碱总值测定.高氯酸电位滴定法
| Methods of test for petroleum and its products - Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
|
BS 2000-280-1999
| 石油及其产品的试验方法.石油产品和润滑剂.抗氧化剂涡轮机矿物油.氧化稳定性的测定
| Methods of test for petroleum and its products - Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability
|
BS 2000-284-2004
| 石油及其产品的试验方法.油、脂肪和石蜡中非皂化物和皂化物的测定
| Methods of test for petroleum and its products - Part 284: Determination of unsaponifiable and saponifiable matter in oils, fats and waxes (Identical with IP 284:2004)
|
BS 2000-306-2002
| 石油和石油产品的试验方法.纯矿物油的氧化稳定性的测定
| Methods of test for petroleum and its products - Determination of oxidation stability of straight mineral oil
|
BS 2000-313-2001
| 石油和石油产品的试验方法.液压油和润滑油的释气值测定
| Methods of test for petroleum and its products - BS 2000-313:2001 Determination of air release of lubricating and hydraulic oils (Identical with IP 313:2001)
|
BS 2000-315-1998
| 石油及石油产品的试验方法.石油产品.第315部分:电绝缘油.硫腐蚀的检测
| Methods of test for petroleum and its products - Petroleum products - Electrical insulating oils - Detection of corrosive sulfur
|
BS 2000-317-1995
| 石油和石油产品的试验方法.液化石油气中残余物的测定.低温蒸发法
| Methods of test for petroleum and its products - Determination of residues in liquefied petroleum gases - Low temperature evaporation method
|
BS 2000-336-2003
| 石油及其制品的试验方法.石油产品.硫含量的测定.能量扩散型X射线荧光光谱法
| Methods of test for petroleum and its products - Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
|
BS 2000-34-2002
| 石油及其产品的试验方法.闪点的测定.宾斯克-马丁密闭杯测定法
| Methods of test for petroleum and its products - Determination of flash point - Pensky-Martens closed cup method
|
BS 2000-342-2000
| 石油及其产品的试验方法.汽油、煤油和蒸馏燃料的硫醇式硫测定.电位法
| Methods of test for petroleum and its products - Determination of thiol (mercaptan) sulfur in light and middle distillate fuels - Potentiometric method
|
BS 2000-346-1996
| 石油和石油产品试验方法.第102部分:未用的润滑基油和不含沥青烯的石油馏分物中多环芳香族环烃的测定.二甲硫
| Methods of test for petroleum and its products - Determination of polycyclic aromatics in unused lubricating base oils and asphaltene free petroleum fractions - Dimethyl sulphoxide extraction refractive index method
|
BS 2000-35-1993
| 石油和石油产品的试验方法.开杯闪点和燃点的测定.平斯基-马丁法
| Methods of test for petroleum and its products - Determination of open flash and fire point - Pensky-Martens method
|
BS 2000-356-1999
| 石油及其制品的试验方法.原油.水的测定.电位卡尔费瑟滴定法
| Methods of test for petroleum and its products - Crude petroleum - Determination of water - Potentiometric Karl Fischer titration method
|
BS 2000-375-1999
| 石油及其产品的试验方法.石油产品.残余燃料油的总残渣.热过滤测定法
| Methods of test for petroleum and its products - Petroleum products - Total sediment in residual fuel oils - Determination by hot filtration
|
BS 2000-377-1995
| 石油及石油产品试验方法.第377部分:石油产品.燃料油中铝和硅的含量测定.电感耦合等离子体发散和原子吸收光
| Methods of test for petroleum and its products - Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods
|
BS 2000-381-1997
| 石油和石油产品试验方法.第381部分.航空燃料.净比能估算
| Methods of test for petroleum and its products - Aviation fuels - Estimation of net specific energy
|
BS 2000-386-1999
| 石油及其制品的试验方法.原油.水的测定.库仑卡尔费瑟滴定法
| Methods of test for petroleum and its products - Crude petroleum - Determination of water - Coulometric Karl Fischer titration method
|
BS 2000-390-1994
| 石油及其产品的试验方法.石油产品.残余燃料油的总沉淀物.用 老化标准程序进行测定.
| Methods of test for petroleum and its products - Petroleum products - Total sediment in residual fuel oils - Determination using standard procedures for ageing
|
BS 2000-412-1996
| 石油和石油产品试验方法.石油产品.第412部分.石油和合成油液水分离性测定
| Methods of test for petroleum and its products - Petroleum products - Determination of water separability of petroleum oils and synthetic fluids
|
BS 2000-413-1996
| 石油和石油产品试验方法.石油产品.第413部分;低水平钒液体燃料.灰化后无焰原子吸收光谱法测定
| Methods of test for petroleum and its products - Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing
|
BS 2000-414-1996
| 石油和石油产品试验方法.第414部分;工业淬火油.冷却特性测定.镍合金探头试验法
| Methods of test for petroleum and its products - Industrial quenching oils - Determination of cooling characteristics - Nickel-alloy probe test method
|
BS 2000-431-1998
| 石油及石油产品的试验方法.石油产品.第431部分:酸值测定.半微量颜色指示滴定法
| Methods of test for petroleum and its products - Petroleum products - Determination of acid number - Semi-micro colour-indicator titration method
|
BS 2000-450-2000
| 石油及其制品的试验方法.柴油.用高频往复式装置评定燃油的润滑性.试验方法
| Methods of test for petroleum and its products - Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Test method
|
BS 2000-454-2000
| 石油及其制品的试验方法.用分光光度法测定汽油中磷的含量
| Methods of test for petroleum and its products - Determination of phosphorus in gasoline - Spectrophotometric method
|
BS 2000-455-2001
| 石油及其制品的试验方法.用原子吸收光谱法测定汽油中锰的含量
| Determination of manganese in gasoline - Atomic absorption spectrometry (AAS) method
|
BS 2000-456-2000
| 石油及其制品的试验方法.用原子吸收光谱法测定汽油中钾的含量
| Methods of test for petroleum and its products - Determination of potassium in gasoline - Atomic absorption spectrometry (AAS) method
|
BS 2000-48-1997
| 石油及其制品的试验方法.润滑油的氧化特性的测定
| Methods of test for petroleum and its products - Determination of oxidation characteristics of lubricating oil
|
BS 2000-50-1993
| 石油和石油产品的试验方法.润滑脂的锥入度测定
| Methods of test for petroleum and its products - Determination of cone penetration of lubricating grease
|
BS 2000-57-1995
| 石油和石油产品的试验方法.石油产品.煤油发烟点测定
| Methods of test for petroleum and its products - Petroleum products - Determination of the smoke point of kerosine
|
BS 2000-61-1999
| 石油及其产品的试验方法.硫的测定.高压燃烧法
| Methods of test for petroleum and its products - Determination of sulfur - High pressure combustion method
|
BS 2000-71.2-1995
| 石油及其产品的试验方法.运动粘度.玻璃毛细管式运动粘度计的规范和操作规程
| Methods of test for petroleum and its products - Kinematic viscosity - Specifications and operating instructions for glass capillary kinematic viscometers
|
BS 2000-74-2000
| 石油及其制品的试验方法.石油制品和沥青材料.用蒸馏法测定水的含量
| Methods of test for petroleum and its products - Petroleum products and bituminous materials - Determination of water - Distillation method
|
BS 2000-76-1993
| 石油和石油产品的试验方法.石蜡和石蜡油的冷凝点测定
| Methods of test for petroleum and its products - Determination of congealing point of waxes and petrolatum
|
BS 245-1976
| 涂料和其它用途用矿物溶剂(石油溶剂及有关烃类溶剂)规范
| Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes
|
BS 2464-1954
| 汽油、石油和润滑剂用软管接头(标称尺寸 1/4英寸至 4英寸)规范
| Specification for hose couplings for petrol, oil and lubricants (3/4 in. to 4 in. nominal sizes)
|
BS 2464-2-1969
| 石油、汽油和润滑油用软管接头规范.第2部分:高压接头
| Specification for hose couplings for petrol, oil and lubricants - High pressure couplings
|
BS 2464-3-1968
| 汽油、石油和润滑剂用软管接头规范.第3部分:快速接头
| Specification for hose couplings for petrol, oil and lubricants - Quick-acting couplings
|
BS 2464-4-1980
| 汽油、石油和润滑剂用软管接头规范.第4部分:欧洲型 100mm快速接头规范
| Hose couplings for petrol, oil and lubricants - Specification for 100 mm quick-acting couplings: European type
|
BS 2977-1958
| 供液化石油气用的家用照明器具
| Domestic lighting appliances for use with liquefied petroleum gases
|
BS 3212-1991
| 液化石油气体气相与液化石油气露天装置用挠性橡皮管、橡皮软管及软管组件规范
| Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations
|
BS 3293-1960
| 石油工业用碳素钢管法兰(标称尺寸24英寸以上)规范
| Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
|
BS 3492-1987
| 公路和铁路运输石油产品(包括航空燃油)油罐车软管及软管组件规范
| Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels
|
BS 3762-3.6-1986
| 配制洗涤剂的分析.定量试验方法.石油醚中可溶物质的测定方法
| Analysis of formulated detergents - Quantitative test methods - Method for determination of matter soluble in light petroleum
|
BS 3799-1974
| 石油工业用钢管配件、螺旋管接头和套管焊接规范
| Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
|
BS 4089-1999
| 液化石油气和液化天然气用金属软管组件规范
| Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
|
BS 4591-1990
| 有机液体(石油产品除外)蒸馏特性的测定方法
| Method for determination of distillation characteristics of organic liquids (other than petroleum products)
|
BS 4695-1980
| 石油蜡熔点(冷却曲线)的测定方法
| Method for determination of melting point of petroleum wax (cooling curve)
|
BS 6441-1993
| 石油测量一览表
| Schedule for petroleum measurement tables
|
BS 6843-2-1988
| 石油燃料的分类.第2部分:工业用和船舶用燃气轮机燃料
| Classification of petroleum fuels - Gas turbine fuels for industrial and marine applications
|
BS 6843-3-1988
| 石油燃料的分类.第3部分:液化石油气体
| Classification of petroleum fuels - Liquefied petroleum gases
|
BS 7340-1991
| 密度为638公斤/立方米-1074公斤/立方米范围的石油烃压缩系数一览表
| Schedule for compressibility factors for petroleum hydrocarbons in the density range 638 kg/m3 to 1074 kg/m3
|
BS 7393-1990
| 采用半微量彩色指示器滴定法测定石油产品中的总酸值
| Method for determination of total acid number in petroleum products by semi-micro colour indicator titration
|
BS 7723-2-1994
| 石油和液态石油产品用立式圆柱形储罐的校验方法.第2部分:光学基准线法
| Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products - Optical-reference-line method
|
BS 7723-4-1995
| 石油和液态石油产品用立式圆柱形储罐的校准方法.内电光测距法
| Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products - Internal electro-optical distance-ranging method
|
BS 7849-1-1996
| 石油和液态石油产品.直接静态测量.立式储罐容量.流体静力储罐量规法的质量测量
| Petroleum and liquid petroleum products - Direct static measurements - Contents of vertical storage tanks - Mass measurement by hydrostatic tank gauging
|
BS AU 216-1-1987
| 道路车辆用石油基制动液的液压制动系统.第1部分:石油基基准液规范
| Hydraulic brake systems using petroleum base brake fluids for road vehicles - Specification for petroleum base reference fluid
|
BS DD ISO/TS 24817-2007
| 石油、石化和天然气工业.管道综合修理.资格认定、设计、安装、试验和验收
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection
|
BS EN 12177-2002
| 石油及其产品的试验方法.液化石油产品.无铅气油.用气相色谱法测定苯含量
| Methods of test for petroleum and its products - Liquid petroleum products - Unleaded petroleum - Determination of benzene content by gas chromatography
|
BS EN 12252-2005
| 液化石油气(LPG)设备和附件.液化石油气公路槽车装备
| LPG equipment and accessories - Equipping of LPG road tankers
|
BS EN 12493-2001
| 液化石油气(LPG)用焊接钢罐.槽罐车.设计和生产
| Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture
|
BS EN 12542-2002
| 安装在地面上的储存容量不超过13M<上标3>的成系列生产的液化石油气储存用固定焊接圆柱形气罐.设计与制造
| Static welded cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation above ground - Design and manufacture
|
BS EN 12569-1999
| 工业阀门.化学和石油化学工艺工业阀门.要求和试验
| Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
|
BS EN 12606-2-2000
| 石油及其制品试验方法.沥青和沥青粘合剂.石蜡含量测定.萃取法
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the paraffin wax content - Method by extraction
|
BS EN 12634-1999
| 石油产品和润滑剂.酸值测定.无水电势滴定法
| Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method
|
BS EN 12662-1998
| 石油及其产品的试验方法.液态石油产品.柴油中污染物的测定
| Methods of test for petroleum and its products - Liquid petroleum products - Determination of contamination in middle distillates
|
BS EN 12766-1-2000
| 石油及其制品试验方法.石油产品和用过的油.PCBs及相关产品的测定.通过带电子俘获探测器的气相色谱法分离和
| Methods of test for petroleum and its products - Petroleum products and used oils - Determination of PCBs and related products - Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
|
BS EN 12766-2-2001
| 石油及其产品的试验方法.石油产品和用过的油.多氯联苯和相关产品的测定.多氯联苯(PCB)含量的测定
| Methods of test for petroleum and its products - Petroleum products and used oils - Determination of PCBs and related products - Calculation of polychlorinated biphenyl (PCB) content
|
BS EN 12766-3-2004
| 石油产品和用过的油.PCB和相关产品的测定.使用电子俘获探测器(ECD)的气相色谱法(GC)测定和量化多氯三联苯(P
| Petroleum products and used oils - Determination of PCBs and related products - Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD)
|
BS EN 12805-2002
| 汽车用液化石油气部件.容器
| Automotive LPG components - Containers
|
BS EN 12806-2003
| 机动车用液化石油气部件.不包括容器
| Automotive liquefied petroleum gas components - Other than containers
|
BS EN 12807-2001
| 液化石油气(LPG)用可运输可再灌装的钎焊钢气瓶.设计和制造
| Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
|
BS EN 12816-2001
| 便携式可再灌装的液化石油气钢瓶和铝瓶.处置
| Transportable refillable steel and aluminium LPG cylinders - Disposal
|
BS EN 12817-2002
| 高达(和包括)13M<上标3>的地上液化石油气罐的检验和再次合格审定
| LPG equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m3 overground
|
BS EN 12818-2002
| 高达(和包括)13M<上标3>的地下液化石油气罐的检验和再次合格审定
| LPG Equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m3 underground
|
BS EN 12819-2002
| 大于13M<上标3>的地上液化石油气罐的检验和再次合格审定
| Inspection and requalification of LPG tanks greater than 13 m3 overground
|
BS EN 12820-2002
| 大于13M<上标3>的地下液化石油气罐的检验和再次合格审定
| Inspection and requalification of LPG tanks greater than 13 m3 underground
|
BS EN 12979-2002
| 汽车液化石油气设备.安装要求
| Automotive LPG systems - Installation requirements
|
BS EN 13016-1-2007
| 液化石油产品.蒸气压力.气体饱和蒸气压(ASVP)的测定和干蒸气压当量值(DVPE)的计算
| Liquid petroleum products - Vapour pressure - Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
|
BS EN 13016-2-2007
| 液化石油产品.蒸气压力.40℃和100℃之间的绝对蒸气压(AVP)的测定
| Liquid petroleum products - Vapour pressure - Determination of absolute vapour pressure (AVP) between 40 °C and 100 °C
|
BS EN 13074-2002
| 石油及其产品的试验方法.石油产品.沥青和沥青粘合剂.用蒸发方法从沥青乳化液中回收粘合剂
| Methods of test for petroleum and its products - Petroleum products - Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation
|
BS EN 13075-1-2002
| 石油及其产品的试验方法.用矿物填充法测定阳离子沥青乳化剂的断裂值
| Methods of test for petroleum and its products - Determination of breaking value of cationic bitumen emulsions, mineral filler method
|
BS EN 13075-2-2002
| 石油及其产品的试验方法.阳离子沥青乳化剂的细料混合时间的测定
| Methods of test for petroleum and its products - Determination of fines mixing time of cationic bitumen emulsions
|
BS EN 13108-6-2006
| 沥青混合物.材料规范.石油沥青砂胶
| Bituminous mixtures - Material specifications - Mastic asphalt
|
BS EN 13109-2002
| 液化石油气罐.处置
| LPG tanks - Disposal
|
BS EN 13110-2002
| 液化石油气用可运输、可再充气的焊接铝瓶.设计和制造
| Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
|
BS EN 13131-2000
| 石油及其制品试验方法.液态石油产品.镍和钒含量测定.原子吸收分光光度法
| Methods of test for petroleum and its products - Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method
|
BS EN 13132-2000
| 石油及其产品试验方法.液化石油产品.无铅汽油.使用柱转换气相色谱法测定有机氧饱和化合物的含量和有机束缚
| Methods of test for petroleum and its products - Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
|
BS EN 13152-2002
| 液化石油气瓶阀门规范和测试.自闭锁
| Specification and testing of LPG cylinder valves - Self closing
|
BS EN 13153-2002
| 液化石油气瓶阀门规范和测试.手动操作
| Specification and testing of LPG cylinder valves - Manually operated
|
BS EN 13175-2003
| 液化石油气设备和附件.液化石油气(LPG)罐阀和配件的规范和测试
| LPG equipment and accessories - Specification and testing for liquefied petroleum gas (LPG) tank valves and fittings
|
BS EN 13301-2003
| 石油及其产品的试验方法.沥青和沥青粘合剂.沥青的染色趋势的测定
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of staining tendency of bitumens
|
BS EN 13302-2003
| 石油及其产品的试验方法.沥青和沥青粘结剂.用旋转主轴装置测定沥青粘度
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of viscosity of bitumen using a rotating spindle apparatus
|
BS EN 13303-2003
| 石油及其产品的试验方法.沥青和沥青粘结剂.工业沥青加热后质量损失的测定
| Methods of test for petroleum and its products - BS 2000-506: Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumens
|
BS EN 13357-2003
| 石油及其制品的试验方法.沥青和沥青粘合剂.石油轻制和软制沥青流出时间的测定
| Methods of test for petroleum and its products - BS 2000-502: Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens
|
BS EN 13358-2004
| 石油及其制品试验方法.BS 2000-525:沥青和沥青粘合剂.石油稀释沥青制品的蒸馏特性测定
| Methods of test for petroleum and its products - BS 2000-525: Bitumen and bituminous binders - Determination of the distillation characteristics of petroleum cut-back bitumen products
|
BS EN 13398-2004
| 石油及其制品的试验方法.BS 2000-516.沥青和沥青粘合剂.改性沥青的弹性回复性的测定
| Methods of test for petroleum and its products - BS2000-516 - Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen
|
BS EN 13399-2004
| 石油及其制品的试验方法.BS 2000-517.沥青和沥青粘合剂.改性沥青的储存稳定性的测定
| Methods of test for petroleum and its products - BS2000-517 - Bitumen and bituminous binders - Determination of storage stability of modified bitumen
|
BS EN 13587-2004
| 石油及其制品的试验方法.BS 2000-519.沥青和沥青粘合剂.用抗拉试验方法测定沥青粘合剂的拉伸性能
| Methods of test for petroleum and its products - BS 2000-519: Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
|
BS EN 13589-2004
| 石油及其制品的试验方法.沥青和沥青粘合剂.用压力延展法测定改性沥青的拉伸性能
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
|
BS EN 13614-2004
| 石油及其制品的试验方法.BS 2000-521:沥青和沥青粘合剂.水浸入试验测定沥青乳胶的粘度.集料法
| Methods of test for petroleum and its products - BS 2000-521: Bitumen and bituminous binders - Determination of adhesivity of bitumen emulsions by water immersion test - Aggregate method
|
BS EN 13616-2004
| 液体石油燃料用固定罐的防溢出设备
| Overfill prevention devices for static tanks for liquid petroleum fuels
|
BS EN 13632-2004
| 石油及其制品的试验方法.BS 2000-518.沥青和沥青粘合剂.聚合物改性沥青中聚合物扩散的目测法
| Methods of test for petroleum and its products - BS2000-518 - Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
|
BS EN 13702-1-2004
| 石油及其制品的试验方法.BS 2000-513:沥青和沥青粘合剂.改性沥青动力粘性的测定.锥板法
| Methods of test for petroleum and its products - BS 2000-513: Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Cone and plate method
|
BS EN 13702-2-2004
| 石油及其制品的试验方法.BS 2000-514:沥青和沥青粘合剂.改性沥青动力粘性的测定.同轴圆桶法
| Methods of test for petroleum and its products - BS 2000-514: Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Coaxial cylinders method
|
BS EN 13703-2004
| 石油及其制品的试验方法.BS 2000-515:沥青和沥青粘合剂.变形能的测定
| Methods of test for petroleum and its products - BS 2000-515: Bitumen and bituminous binders - Determination of deformation energy
|
BS EN 13760-2003
| 轻型和重型车辆用机动车液化石油气填充系统.喷油嘴试验要求和尺寸
| Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
|
BS EN 13766-2003
| 液化石油气和液化天然气输送用热塑性多层非硫化软管和软管组件.规范
| Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
|
BS EN 13776-2002
| 液化石油气道路运输罐装车的灌装和卸料程序
| Filling and discharge procedures for LPG road tankers
|
BS EN 13799-2002
| 液化石油气罐的容量计量仪
| Contents gauges for LPG tanks
|
BS EN 13856-2002
| 汽车用液化石油气系统用户使用说明书内容的最低要求
| Minimum requirements for the content of the user manual for automotive LPG systems
|
BS EN 13942-2003
| 石油和天然气工业.管道输送.管道阀
| Petroleum and natural gas industries - Pipeline transportation - Pipeline valves
|
BS EN 13952-2003
| 石油液化气(LPG)罐.充气规程
| LPG equipment and accessories - Filling procedures for LPG cylinders
|
BS EN 13953-2003
| 液化石油气(LPG)用移动式可填充储气瓶的减压安全阀
| Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG)
|
BS EN 14075-2002
| 地下设备用和石油液化气储气容量不大于13 mUP3的静止焊接系列园柱型钢罐.设计和制造
| Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation underground - Design and manufacture
|
BS EN 14077-2003
| 石油制品.有机卤素含量的测定.氧化微库仑法
| Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method
|
BS EN 14078-2003
| 液化石油制品.中间馏出物中脂肪酸甲酯的测定.红外光谱测定法
| Liquid petroleum products - Determination of fatty acid methyl esters (FAME) in middle distillates - Infrared spectroscopy method
|
BS EN 14140-2003
| 液化石油气(LPG)用可移动可重填焊接钢瓶.备选方案设计和建造
| Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Alternative design and construction
|
BS EN 14161-2003
| 石油和天然气工业.管道输送系统
| Petroleum and natural gas industries - Pipeline transportation systems
|
BS EN 14163-2001
| 石油和天然气工业.管道运输系统.管道焊接
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines
|
BS EN 1425-2000
| 石油及石油产品试验方法.沥青和沥青粘合剂.感知特性的表示
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Characterization of perceptible properties
|
BS EN 14274-2003
| 石油及其产品的试验方法.车用燃料.汽油及柴油质量的评估.燃料质量监测系统(FQMS)
| Methods of test for petroleum and its products - Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS)
|
BS EN 1428-2000
| 石油及石油产品的试验方法.沥青和沥青粘合剂.沥青乳液中的水含量的测定.恒沸点蒸馏分析法
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method
|
BS EN 1429-2000
| 石油及石油产品试验方法.沥青和沥青粘合剂.由筛分法测定沥青乳液筛分残留物和储存稳定性
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of residue on sieving of bitumen emulsions and determination of storage stability by sieving
|
BS EN 1430-2000
| 石油及石油产品试验方法.沥青和沥青粘合剂.沥青乳液的粒子极性的测定
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions
|
BS EN 1431-2000
| 石油及石油产品试验方法.沥青和沥青粘合剂.用蒸馏法测定沥青乳液蒸馏的再生粘合剂和蒸馏油
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of recovered binder and oil distillate from bitumen emulsions by distillation
|
BS EN 14331-2004
| 液化石油产品.中间馏出物中脂肪酸甲酯(FAME)的分离和表征.液相(LC)/气相色谱(GC)法
| Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method
|
BS EN 1439-2005
| 液化石油气(LPG)设备和附件.液化石油气用可移动并可再填充的焊接和钎焊钢瓶.填充前、后和填充过程中的检验
| LPG equipment and accessories - Transportable refillable welded and brazed steel liquefied petroleum gas (LPG) cylinders - Procedure for checking before, during and after filling
|
BS EN 1440-2005
| 液化石油气(LPG)设备和附件.可移动可再填充的焊接和钎焊钢液化石油气瓶.定期检查
| LPG equipment and accessories - Transportable refillable welded and brazed steel liquefied petroleum gas (LPG) cylinders - Periodic inspection
|
BS EN 1442-2006
| 液化石油天然气(LPG)设备和附件.液化石油天然气用可运输的并可再填充的焊接钢瓶.设计和构造
| LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
|
BS EN 14422-2004
| 液化石油气(LPG)输送软管用夹具型连接组件
| Clamp type coupling assemblies for LPG transfer hoses
|
BS EN 14427-2004
| 液化石油气(LPG)用可移动的可再充填式全包装复合气瓶.设计和建造
| Transportable refillable fully wrapped composite cylinders for liquefied petroleum gases (LPG) - Design and construction
|
BS EN 14517-2004
| 石油及其产品的试验方法.BS 2000-526:液体石油产品.汽油中烃类和氧化物的测定.多维气相色谱法
| Methods of test for petroleum and its products - BS 2000-526: Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method
|
BS EN 14543 2005 + A1-2005
| 专用液化石油气设备用规范.伞式庭院加热器.户外或充足通风面积用无烟道辐射加热器
| Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use
|
BS EN 14543-2005
| 专用液化石油气设备规范.伞式庭院加热器.户外和充足通风面积 的无烟道辐射加热器
| Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use
|
BS EN 14678-1-2006
| 液化石油气(LPG)设备和附件.汽车罐装设备用LPG设备的结构和性能.分配器
| LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Dispensers
|
BS EN 14763-2005
| 液化石油气(LPG)设备和附件.液化石油气用可移动并可再填充的合成气瓶.填充前、后和填充过程中的检验规程
| LPG equipment and accessories - Transportable refillable composite cylinders for liquefied petroleum gas (LPG) - Procedure for checking before, during and after filling
|
BS EN 14767-2005
| 液化石油气(LPG)设备和附件.液化石油气(LPG)用可移动可再填充合成气瓶.周期性检验
| LPG equipment and accessories — Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) — Periodic inspection
|
BS EN 14769-2006
| 石油及其产品的试验方法.沥青和沥青粘合剂.用压力老化容器(PAV)寻求加速长期老化的条件
| Methods of test for petroleum and its products - Bitumen and bituminousbi nders - Accelerated long-term ageing conditioning by a pressure ageingves sel (PAV)
|
BS EN 14770-2006
| 石油及其产品的试验方法.沥青和沥青粘合剂.复合剪切模量和相位角的测定.动态剪切流变仪(DSR)
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
|
BS EN 14794-2005
| 液化石油气设备和附件.液化石油气(LPG)用可运输和可再填充的铝储气瓶.填充前后和填充过程中的检查规程
| LPG equipment and accessories - Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG) - Procedure for checking before, during and after filling
|
BS EN 14795-2005
| 液化石油气(LPG)设备和附件.液化石油气(LPG)用可运输可再填充的铝储气瓶.周期性检验
| LPG equipment and accessories - Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG) - Periodic inspection
|
BS EN 14832-2005
| 石油和相关产品.测定耐火磷酸酯液体的氧化稳定性和腐蚀性
| Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
|
BS EN 14833-2005
| 石油和相关产品.测定耐火磷酸酯液体的水解稳定性
| Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
|
BS EN 14841-2005
| 液化石油气(LPG)设备和附件.LPG罐车的卸料程序
| LPG equipment and accessories - Discharge procedures for LPG rail tankers
|
BS EN 14870-1-2004
| 石油和天然气工业.管道运输系统的感应管弯头、配件和法兰.感应管弯头
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Induction bends
|
BS EN 14870-2-2004
| 石油和天然气工业.管道运输系统的吸入管弯头、配件和法兰.配件
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings
|
BS EN 14870-3-2006
| 石油和天然气工业.管道运输系统的吸入管弯头、配件和法兰.法兰
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
|
BS EN 14893-2006
| 液化石油气设备和附件.容量为150升~1000升可运输液化石油气(LPG)的焊接钢压力桶
| LPG equipment and accessories - Transportable liquefied petroleum gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres
|
BS EN 14894-2006
| 液化石油气设备和附件.储气瓶和圆桶标记
| LPG equipment and accessories - Cylinder and drum marking
|
BS EN 14912-2005
| 液化石油气体(LPG)设备和附件.汽缸周期性检查时液化石油气体(LPG)汽缸阀的检验和维护
| LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
|
BS EN 14913-2005
| 液化石油气(LPG)设备和附件.液化石油气(LPG)用可移动可再装填焊接钢瓶.替代方案设计和制造.装填前、中、后
| LPG equipment and accessories - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Alternative design and construction - Procedure for checking before, during and after filling
|
BS EN 14914-2005
| 液化石油气(LPG)设备和附件.液化石油气(LPG)用可移动可再装填焊接钢瓶.替代方案设计和制造.周期性检验
| LPG equipment and accessories - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Alternative design and construction - Periodic inspection
|
BS EN 15033-2006
| 利用LPG(液化石油气)生产车辆和小船用卫生热水的密封型贮水式热水器
| Room sealed storage water heaters for the production of sanitaryhot water using LPG for vehicles and boats
|
BS EN 15195-2007
| 液体石油产品.用等容室燃烧法测定中间馏出燃料的点火延迟和衍生十六烷值(DCN)
| Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
|
BS EN 15199-1-2006
| 石油产品.用气相色谱法测定沸程分布.第1部分:中间馏出物和润滑基油
| Petroleum products — Determination of boiling rangedistribution by gas chromatography method — Part 1: Middle distillates and lubricating base oils
|
BS EN 15199-2-2006
| 石油产品.用气相色谱法测定沸程分布.第2部分:重馏分和残余燃料
| Petroleum products — Determination of boiling rangedistribution by gas chromatography method — Part 2: Heavy distillates and residual fuels
|
BS EN 15202-2006
| 液化石油气(LPG)设备和附件.液化石油储气瓶阀门出口和相关设备连接件的实际应用尺寸
| LPG equipment and accessories — Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
|
BS EN 15484-2007
| 乙醇是石油的一种混合组分.无机氯化物的测定.电位测量法
| Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
|
BS EN 15485-2007
| 乙醇是石油的一种混合组分.硫含量的测定.波长色散X射线荧光光谱法
| Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
|
BS EN 15486-2007
| 乙醇是石油的一种混合组分.硫含量的测定.紫外荧光法
| Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
|
BS EN 15487-2007
| 乙醇是石油的一种混合组分.磷含量的测定.钼酸铵光谱测定法
| Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
|
BS EN 15488-2007
| 乙醇是石油的一种混合组分.铜含量的测定.石墨炉原子吸收光谱法
| Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
|
BS EN 15489-2007
| 乙醇是石油的一种混合组分.含水量的测定.卡耳费瑟库仑滴定法
| Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
|
BS EN 15490-2007
| 乙醇是石油的一种混合组分.pH值的测定
| Ethanol as a blending component for petrol - Determination of pHe
|
BS EN 15491-2007
| 乙醇是石油的一种混合组分.总酸度的测定.颜色指示滴定法
| Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
|
BS EN 15553-2007
| 石油产品和相关材料.烃类型的测定.荧光指示剂吸附法
| Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
|
BS EN 1596-1998
| 专用液化石油气的器具规范.移动式和便携式非家用强制对流转换直燃式空气加热器
| Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters
|
BS EN 1601-1997
| 石油和石油产品的试验方法.液态石油产品.无铅汽油.通过气相色谱法对有机氧化物和总有机结合氧含量的测定
| Methods of test for petroleum and its products - Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
|
BS EN 1762-2004
| 25巴(2,5MPA)以下液化石油气(LPG)(液相或气相)以及天然气用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
|
BS EN 1919-2000
| 可运输气瓶.液化气(不包括乙炔和液化石油气).灌装检验
| Transportable gas cylinders - Cylinders for liquefied gases (excluding acetylene and LPG) - Inspection at time of filling
|
BS EN 1949-2002
| 休闲旅居活动车和其他道路车内居住用的石油液化气系统的安装规范
| Specification for the installation of LPG systems for habitation purpose s in leisure accommodation vehicles and in other vehicles
|
BS EN 23015-1995
| 石油产品.混浊点测定
| Petroleum products - Determination of cloud point
|
BS EN 237-2004
| 石油及其产品的试验方法.BS 2000-428:液态石油产品.汽油.用原子吸收光谱法测定低铅浓度
| Methods of test for petroleum and its products - BS 2000-428: Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
|
BS EN 238-1996
| 石油及其产品的试验方法.液态石油产品.汽油.用红外光谱法测定苯含量
| Methods of test for petroleum and its products - Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
|
BS EN 241-2000
| 石油及其产品的试验方法.液态石油产品.钠含量的测定.原子吸收光谱测定法
| Methods of test for petroleum and its products - Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
|
BS EN 24260-1994
| 石油及其产品的试验方法.石油产品和烃类.硫含量测定.粗油绳燃烧法
| Methods of test for petroleum and its products - Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method
|
BS EN 27941-1994
| 石油及其产品试验方法.商用丙烷和丁烷.气相色谱分析
| Methods of test for petroleum and its products - Commercial propane and butane - Analysis by gas chromatography
|
BS EN 417-1992
| 与便携式灶具配用的带有或不带阀门的一次性金属液化石油气瓶.制作、检验、试验和标记
| Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
|
BS EN 449-2002
| 专用液化石油气装置规范.无排气口的居室暖器(包括扩散催化燃烧的加热器)
| Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters)
|
BS EN 461-1999
| 专用液化石油气器具规范.不超过10KW的无烟道非家庭用对流加热器
| Specification for dedicated liquefied petroluem gas appliances - Flueless non-domestic space heaters not exceeding 10 kW
|
BS EN 484-1998
| 专用液化石油气的灶具规范.独立的煤气灶,包括室外配套用的烧烤架
| Specification for dedicated liquefied petroleum gas appliances - Independent hotplates, including those incorporating a grill for outdoor use
|
BS EN 497-1998
| 液化石油气专用装置规范.室外用多功能煮水燃烧器
| Specification for dedicated liquefied petroleum gas appliances - Multi-purpose boiling burners for outdoor use
|
BS EN 498-1998
| 液化石油气专用装置规范.户外用烤肉架
| Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use
|
BS EN 521-2006
| 专用液化石油气器的灶具规范.便携式气压液化石油气器具
| Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances
|
BS EN 589-2004
| 机动车用燃料.液化石油气(LPG).要求和试验方法
| Automotive fuels - LPG - Requirements and test methods
|
BS EN 61221-2004
| 石油产品及润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范
| Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications
|
BS EN 624-2000
| 专用液化石油气器具规范.车辆和小船中安装的房间用密封式液化石油气空间加热设备
| Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
|
BS EN 732-1999
| 专用液化石油气的器具规范.吸收式制冷
| Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators
|
BS EN 858-1-2002
| 轻液体(例如:油和石油)分离器系统.产品设计、性能和测试、标记和质量控制的原则
| Separator systems for light liquids (e.g. oil and petrol) - Principles of product design, performance and testing, marking and quality control
|
BS EN 858-2-2003
| 轻液体(例如:油和石油)分离器系统.标称尺寸、安装、运行和维护的选择
| Separator systems for light liquids (e.g. oil and petrol) - Selection of nominal size, installation, operation and maintenance
|
BS EN 976-1-1997
| 玻璃增强塑料地下油罐.非压力存储液体石油基燃料的卧式园柱油罐.单壁油罐试验方法和要求
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Requirements and test methods for single wall tanks
|
BS EN 976-2-1997
| 玻璃增强塑料地下油罐.非压力存储液体石油基燃料的卧式园柱油罐.单壁油罐的运输,储存,搬运和安装
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Transport, handling, storage and installation of single wall tanks
|
BS EN ISO 10239-2000
| 小艇.液化石油气(LPG)系统
| Small craft - Liquified petroleum gas (LPG) systems
|
BS EN ISO 10370-1996
| 石油产品.碳渣的测定.微米法
| Petroleum products - Determination of carbon residue - Micro method
|
BS EN ISO 10417-2004
| 石油和天然气工业.井下安全阀系统.设计、安装、操作和矫正
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
|
BS EN ISO 10418-2003
| 石油和天然气工业.近海生产装置.基础表面操作安全系统
| Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems
|
BS EN ISO 10423-2004
| 石油和天然气工业.钻井和开采设备.井口设施和采油树设备(CD-ROM)
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (CD-ROM)
|
BS EN ISO 10424-1-2004
| 石油和天然气工业.旋转钻探设备.旋转钻杆构件
| Petroleum and natural gas industries - Rotary drilling equipment - Rotary drill stem elements
|
BS EN ISO 10426-1-2006
| 石油和天然气工业.固井用水泥和材料.规范
| Petroleum and natural gas industries - Cements and materials for well cementing - Specification
|
BS EN ISO 10426-2-2004
| 石油和天然气工业.油井固井用水泥和材料.油井用水泥的试验
| Petroleum and natural gas industries - Cements and materials for well cementing - Testing of well cements
|
BS EN ISO 10426-3-2003
| 石油和天然气工业.固井用水泥和材料.深水井水泥配方的试验
| Petroleum and natural gas industries - Cements and materials for well cementing - Testing of deepwater well cement formulations
|
BS EN ISO 10426-4-2005
| 石油和天然气工业.油井固井用水泥和材料.在大气压力下泡沫水泥浆的制备和试验
| Petroleum and natural gas industries - Cements and materials for well cementing - Preparation and testing of foamed cement slurries at atmospheric pressure
|
BS EN ISO 10426-5-2006
| 石油和天然气工业.油井固井用水泥和材料.在大压力下固井水泥加工制剂的收缩和膨胀的测定
| Petroleum and natural gas industries - Cements and materials for well cementing - Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
|
BS EN ISO 10427-1-2002
| 石油和天然气工业.套管扶正器.弓形弹簧套管扶正器
| Petroleum and natural gas industries - Casing centralizers - Bow-spring casing centralizers
|
BS EN ISO 10427-2-2004
| 石油和天然气工业.良好胶结设备.扶正器的放置和限动环的检测
| Petroleum and natural gas industries - Equipment for well cementing - Centralizer placement and stop-collar testing
|
BS EN ISO 10427-3-2004
| 石油和天然气工业.固井用设备.浮动式固井设备的性能试验
| Petroleum and natural gas industries - Equipment for well cementing - Performance testing of cementing float equipment
|
BS EN ISO 10432-2005
| 石油和天然气工业.下降孔设备.地下安全阀设备
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
|
BS EN ISO 10434-2004
| 石油、石化和相关工业用螺栓帽状钢闸阀
| Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
|
BS EN ISO 10437-2003
| 石油、石油化学和天然气工业.专用汽轮机设备
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications
|
BS EN ISO 10438-1-2003
| 石油、石化和天然气工业.润滑、油封、控油系统和辅助装置.一般要求
| Petroleum, petrochemical and natural gas industries - Lubrication , shaft-sealing and control-oil systems and auxiliaries - General requirements
|
BS EN ISO 10438-2-2003
| 石油和天然气工业.润滑、油封、控油系统和辅助装置.专用油系统
| Petroleum and natural gas industries - Lubrication, shaft sealing and control oil systems and auxiliaries - Special purpose oil systems
|
BS EN ISO 10438-3-2003
| 石油、石化和天然气工业.润滑、油封、控油系统和辅助装置.通用油系统
| Petroleum, petrochemical and natural gas industries - Lubrication , shaft sealing and control oil systems and auxilliaries - General-purpose oil systems
|
BS EN ISO 10438-4-2004
| 石油、石化和天然气工业.润滑、油封、控油系统和辅助装置.自动气封支撑系统
| Petroleum, petrochemical and natural gas industries - Lubrication , shaft-sealing and control-oil systems and auxiliaries - Self-acting gas seal support systems
|
BS EN ISO 10439-2002
| 石油、化学和气体工业.离心压缩机
| Petroleum, chemical and gas service industries - Centrifugal compressors
|
BS EN ISO 10440-1-2001
| 石油和天然气工业.旋转型容积式压缩机.加工压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Process compressors (oil-free)
|
BS EN ISO 10440-2-2002
| 石油和天然气工业.旋转型容积式压缩机.封装的空气压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Packaged air compressors (oil-free)
|
BS EN ISO 10441-2007
| 石油、石化和天然气工业.机械动力传输用挠性联轴器.专用设施
| Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-purpose applications
|
BS EN ISO 10442-2003
| 石油、化学和气体工业.整体封装齿轮传动离心空气压缩机
| Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors
|
BS EN ISO 11960-2005
| 石油和天然气工业.油井套管或油管用钢管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
|
BS EN ISO 11961-1997
| 石油和天然气工业.钻探管用钢管.规范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
|
BS EN ISO 12185-1996
| 石油及其产品试验方法.原油和石油产品.密度测定.振荡U形管法
| Methods of test for petroleum and its products - Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
|
BS EN ISO 12205-1996
| 石油及其产品试验方法.石油产品.中间馏分燃料氧化稳定性的测定
| Methods of test for petroleum and its products - Petroleum products - Determination of the oxidation stability of middle-distillate fuels
|
BS EN ISO 12937-2001
| 石油及其产品的试验方法.BS 2000-438:石油产品.水分的测定.库仑卡耳.费休滴定法
| Methods of test for petroleum and its products - BS 2000-438: Petroleum products - Determination of content - Coulometric Karl Fischer titration method
|
BS EN ISO 13500-2006
| 石油和天然气工业.钻井液体材料.规范和试验
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests
|
BS EN ISO 13501-2006
| 石油和天然气工业.钻井液.加工系统评估
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation
|
BS EN ISO 13503-1-2003
| 石油和天然气工业.完井液和材料.完井液粘性测量
| Petroleum and natural gas industries - Completion fluids and materials - Measurement of viscous properties of completion fluids
|
BS EN ISO 13503-2-2006
| 石油和天然气工业.完井液和材料.水力压裂和砾石填充作业用支撑剂性能测定
| Petroleum and natural gas industries - Completion fluids and materials - Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
|
BS EN ISO 13503-3-2006
| 石油和天然气工业.完井液和材料.重盐水试验
| Petroleum and natural gas industries - Completion fluids and materials - Testing of heavy brines
|
BS EN ISO 13503-4-2006
| 石油和天然气工业.完井液和材料.在静态条件下测量增产液和砾石填充液渗漏的程序
| Petroleum and natural gas industries - Completion fluids and materials - Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
|
BS EN ISO 13503-5-2006
| 石油和天然气工业.完井液和材料.测量重盐水长期电导率方法
| Petroleum and natural gas industries - Completion fluids and materials - Procedures for measuring the long term conductivity of proppants
|
BS EN ISO 13533-2002
| 石油和天然气工业.钻探和生产设备.钻孔设备
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment
|
BS EN ISO 13534-2001
| 石油和天然气工业.钻#和生产设备.提升设备的检查、维护、修理和再制造
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and re-manufacture of hoisting equipment
|
BS EN ISO 13535-2001
| 石油和天然气工业.钻井和生产设备.提升设备
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment - Hoisting equipment
|
BS EN ISO 13625-2003
| 石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings
|
BS EN ISO 13626-2004
| 石油和天然气工业.钻井和生产设备.钻井和油井辅助装置
| Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures
|
BS EN ISO 13628-1-2005
| 石油和天然气工业.水下采油系统的设计和操作.一般要求和建议
| Petroleum and natural gas industries - Design and operation of subsea production systems - General requirements and recommendations
|
BS EN ISO 13628-10-2006
| 石油和天然气工业.水下采油系统的设计和操作.连接柔性管规范
| Petroleum and natural gas industries - Design and operation of subseaprod uction systems - Specification for bonded flexible pipe
|
BS EN ISO 13628-2-2006
| 石油和天然气工业.海底采油系统的设计和操作.海底和海洋设备用未结合软管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Unbonded flexible pipe systems for subsea and marine applications
|
BS EN ISO 13628-3-2001
| 石油和天然气工业.水下生产系统的设计和操作.贯通流线系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Through flowline (TFL) systems
|
BS EN ISO 13628-4-1999
| 石油和天然气工业.水下采油系统的设计和操作.井口和采油树设备
| Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea wellhead and tree equipment
|
BS EN ISO 13628-6-2006
| 石油和天然气工业.水下采油系统的设计和操作.水下生产控制系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea production control systems
|
BS EN ISO 13628-7-2005
| 石油和天然气工业.水下采油系统的设计和操作.完井/修井提升系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Completion/workover riser systems
|
BS EN ISO 13628-8-2002
| 石油和天然气工业.水下采油系统设计和操作.水下采油系统的遥控潜水器(ROV)接口
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems
|
BS EN ISO 13628-9-2001
| 石油和天然气工业.水下采油系统设计和操作.遥控设备(ROT)干涉系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated tool (ROT) intervention systems
|
BS EN ISO 13631-2002
| 石油和天然气工业.组合的往复式气体压缩机
| Petroleum and natural gas industries - Packaged reciprocating gas compressors
|
BS EN ISO 13679-2003
| 石油和天然气工业.套管和管连接的测试程序
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections
|
BS EN ISO 13680-2002
| 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
|
BS EN ISO 13691-2002
| 石油和天然气工业.专用高速齿轮组件
| Petroleum and natural gas industries - High-speed special-purpose gear units
|
BS EN ISO 13702-1999
| 石油和天然气工业.海上生产设备着火和爆炸的控制和减弱.要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
|
BS EN ISO 13703-2001
| 石油和天然气工业.近海生产平台管道系统设计和安装
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms
|
BS EN ISO 13705-2006
| 石油、石化和天然气工业.一般精炼厂用火加热器
| Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service
|
BS EN ISO 13706-2006
| 石油、石油化工和天然气工业.风冷式热交换器
| Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
|
BS EN ISO 13709-2003
| 石油、石化和天然气工业用离心泵
| Centrifugal pumps for petroleum, petrochemical and natural gas industries
|
BS EN ISO 13710-2004
| 石油、石化和天然气工业.往复式变容真空泵
| Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps
|
BS EN ISO 13736-1998
| 石油产品和其它液体.闪点测定.阿贝耳闭口杯法
| Petroleum products and other liquids - Determination of flash point - Abel closed cup method
|
BS EN ISO 13757-1996
| 石油及其产品试验方法.液化石油气.油残余物的测定.高温法
| Methods of test for petroleum and its products - Liquefied petroleum gases - Determination of oily residues - High temperature method
|
BS EN ISO 13758-1997
| 石油和石油产品的试验方法.液化石油气.丙烷干燥性的评估.阀冻结法
| Methods of test for petroleum and its products - Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
|
BS EN ISO 13759-1997
| 石油和石油产品的试验方法.石油产品.柴油燃料中硝酸烷基酯的测定.光谱法
| Methods of test for petroleum and its products - Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method
|
BS EN ISO 14224-2007
| 石油天然气工业.设备可靠性和维修数据的采集和交换
| Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
|
BS EN ISO 14310-2002
| 石油和天然气工业.下孔设备.装填器和沙桥卡钻
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs
|
BS EN ISO 14596-2007
| 石油产品.硫含量的测定.波长色散X射线荧光光谱法
| Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry
|
BS EN ISO 14597-1999
| 石油产品.钒和镍含量的测定.波长色散X射线荧光光谱法
| Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry
|
BS EN ISO 14691-2000
| 石油和天然气工业.机械动力传输用柔性接头.一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications
|
BS EN ISO 14692-1-2003
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.词汇、符号、应用和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Vocabulary, symbols, applications and materials
|
BS EN ISO 14692-2-2003
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.合格评定和生产
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Qualification and manufacture
|
BS EN ISO 14692-3-2003
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.系统设计
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - System design
|
BS EN ISO 14692-4-2003
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.制造、安装和运行
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Fabrication, installation and operation
|
BS EN ISO 14693-2004
| 石油和天然气工业.钻井和油井辅助设备
| Petroleum and natural gas industries - Drilling and well-servicing equipment
|
BS EN ISO 14723-2002
| 石油和天然气工业.管道输送系统.海下管道阀门
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
|
BS EN ISO 14935-1999
| 石油及其相关产品.难燃液芯燃烧持久性测定
| Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids
|
BS EN ISO 15029-1-2000
| 石油和相关产品.耐火液体喷射点燃特性的测定.喷射火焰持久性.空心锥形喷嘴法
| Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Spray flame persistence - Hollow-cone nozzle method
|
BS EN ISO 15136-1-2001
| 石油和天然气工业的钻孔设备.人工提升用步进式空腔泵系统.泵
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Pumps
|
BS EN ISO 15136-2-2006
| 石油和天然气工业.人工升降机用推进式腔体泵系统.表面传动系统
| Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Surface drive systems
|
BS EN ISO 15138-2001
| 石油和天然气工业.海上开采设备.加热、通风和空调设备
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning
|
BS EN ISO 15156-1-2002
| 石油和天然气工业.在含有HDOWN2S的油气生产环境中使用的材料.防裂材料选择的一般原则
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - General principles for selection of cracking-resistant materials
|
BS EN ISO 15156-2-2003
| 石油、石化和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化碳和低合金钢及铸铁的使用
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking resistant carbon and low alloy steels, and the use of cast irons
|
BS EN ISO 15156-3-2003
| 石油、石化和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化CRAs(耐腐蚀合金)和其他合金
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
|
BS EN ISO 1516-2002
| 石油及石油产品的试验方法.闪点/无闪点测定.封闭杯平衡法
| Method of test for petroleum and its products - Determination of flash/no flash - Closed cup equilibrium method
|
BS EN ISO 1523-2002
| 石油及其产品的试验方法.闪点的测定.闭杯平衡法
| Method of test for petroleum and its products - Determination of flash point - Closed cup equilibrium method
|
BS EN ISO 15463-2003
| 石油和天燃气工业.新套管、管和平端钻管的现场检验
| Petroleum and natural gas industries - Field inspection of new casing, tubing and plain end drill pipe
|
BS EN ISO 15546-2007
| 石油和天然气工业.铝合金钻杆
| Petroleum and natural gas industries - Aluminium alloy drill pipe
|
BS EN ISO 15547-1-2006
| 石油、石化和天然气工业.板式热交换器.板框式热交换器
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Plate-and-frame heat exchangers
|
BS EN ISO 15547-2-2005
| 石油、石化和天然气工业.板式热交换器.铜焊铝板热交换器
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Brazed aluminium plate-fin heat exchangers
|
BS EN ISO 15663-1-2001
| 石油和天然气工业.寿命周期成本计算.方法论
| Petroleum and natural gas industries - Life cycle costing - Methodology
|
BS EN ISO 15761-2003
| 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀
| Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
|
BS EN ISO 16070-2006
| 石油和天然气工业.下降孔设备.锁紧芯轴和落地螺纹接头
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
|
BS EN ISO 16708-2006
| 石油和天然气工业.管道传输系统.基于可靠性的极限状态法
| Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
|
BS EN ISO 16812-2007
| 石油、石化和天然气工业.壳管式热交换器
| Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers
|
BS EN ISO 17078-1-2005
| 石油和天然气工业.钻井和生产设备.偏心轴
| Petroleum and natural gas industries - Drilling and production equipment - Side-pocket mandrels
|
BS EN ISO 17292-2004
| 石油、石油化工和相关工业用金属球阀
| Metal ball valves for the petroleum, petrochemical and allied industries
|
BS EN ISO 17776-2001
| 石油和天然气工业.海上开采装置.危险识别和风险评定用工具和技术导则
| Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment
|
BS EN ISO 19900-2003
| 石油和天然气工业.海上构筑物的一般要求
| Petroleum and natural gas industries - General requiremenents for offshore structures
|
BS EN ISO 19901-1-2006
| 石油和天然气工业.海上建筑物的特殊要求.Metocean设计和运行研究
| Petroleum and natural gas industries - Specific requirements for offshore structures - Metocean design and operating considerations
|
BS EN ISO 19901-2-2005
| 石油和天然气工业.近海建筑物的特殊要求.地震设计规程和标准
| Petroleum and natural gas industries - Specific requirements for offshore structures - Seismic design procedures and criteria
|
BS EN ISO 19901-4-2003
| 石油和天然气工业.海上建筑物特殊要求.土质和基础设计考虑
| Petroleum and natural gas industries - Specific requirements for offshore structures - Geotechnical and foundation design considerations
|
BS EN ISO 19901-5-2003
| 石油和天然气工业.海上建筑物的特殊要求.工程设计和建筑中重量的控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Weight control during engineering and construction
|
BS EN ISO 19901-7-2006
| 石油和天然气工业.海上建筑物的特殊要求.浮动式海上建筑物和移动式海上设备的定位系统
| Petroleum and natural gas industries - Specific requirements for offshore structures - Stationkeeping systems for floating offshore structures and mobile offshore units
|
BS EN ISO 19903-2007
| 石油和天然气工业.海上固定混凝土结构
| Petroleum and natural gas industries - Fixed concrete offshore structures
|
BS EN ISO 19904-1-2006
| 石油和天然气工业.浮式海上结构.单体船、半潜水船和船柱
| Petroleum and natural gas industries - Floating offshore structures - Monohulls, semi-submersibles and spars
|
BS EN ISO 20623-2004
| 石油及其产品的试验方法.BS 2000-239:流体的极限压力和耐磨特性测定.四球法(欧洲条件)
| Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions)
|
BS EN ISO 20763-2004
| 石油和相关产品.液压液耐磨性的测定.叶轮泵法
| Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
|
BS EN ISO 20764-2003
| 石油和相关产品.水含量测定用高沸点流体试验区的准备.氮净化法
| Methods of test for petroleum and its products - Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method
|
BS EN ISO 20783-1-2004
| 石油和相关制品.抗火液体的乳胶稳定度测定.HFAE类液体
| Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Fluids in category HFAE
|
BS EN ISO 20783-2-2004
| 石油和相关制品.抗火液体的乳胶稳定度测定.HFB类液体
| Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Fluids in category HFB
|
BS EN ISO 20823-2003
| 石油和相关产品.与热表面接触的液体的易燃性测定.歧管点火试验
| Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
|
BS EN ISO 20843-2003
| 石油和相关产品.HFAE、HFAS和HFC类抗燃液体的pH值测定
| Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
|
BS EN ISO 20844-2004
| 石油和相关产品.使用柴油注射器喷嘴测定含聚合物油的剪切稳定性
| Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
|
BS EN ISO 20846-2004
| 石油及其产品的试验方法.BS 2000-490:石油产品.液体石油产品的硫含量测定.紫外线荧光法
| Methods of test for petroleum and its products - BS 2000-490: Petroleum products - Determination of sulfur content of liquid petroleum products - Ultraviolet fluorescence method
|
BS EN ISO 20847-2004
| 石油及其产品的试验方法.BS 2000-496:石油产品.机动车燃料的硫含量的测定.能量分散X-射线荧光光谱法
| Methods of test for petroleum and its products - BS 2000-496: Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
|
BS EN ISO 20884-2004
| 石油及其产品的试验方法.BS 2000-497:石油产品.机动车燃料的硫含量的测定.波长分散X-射线荧光光谱法
| Methods of test for petroleum and its products - BS 2000-497: Determination of sulfur content of automotive fuels - Wavelength- dispersive X-ray fluorescence spectrometry
|
BS EN ISO 21329-2004
| 石油和天然气工业.管道运输系统.机械连接件的试验程序
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors
|
BS EN ISO 2160-1999
| 石油产品.对铜的腐蚀作用.铜条试验
| Petroleum products - Corrosiveness to copper - Copper strip test
|
BS EN ISO 23251-2006
| 石油、石化和天然气工业.压力释放和降压系统
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems
|
BS EN ISO 3104-1996
| 石油及其产品的试验方法.石油产品.透明和不透明液体.运动粘度的测定和动力粘度的计算
| Methods of test for petroleum and its products - Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
|
BS EN ISO 3170-2004
| 石油及其产品的试验方法.BS 2000-475:石油液体.人工采样
| Methods of test for petroleum and its products - BS 2000-475: Petroleum liquids - Manual sampling
|
BS EN ISO 3171-1999
| 液态石油.自动管道取样
| Methods of test for petroleum and its products - BS 2000-476: Petroleum liquids - Automatic pipeline sampling
|
BS EN ISO 3405-2000
| 石油及其制品的试验方法.石油产品.大气压力下蒸馏特性的测定
| Methods of test for petroleum and its products - Petroleum products - Determination of distillation characteristics at atmospheric pressure
|
BS EN ISO 3675-1998
| 原油和液体石油产品.密度的实验室测定.石油密度计法
| Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method
|
BS EN ISO 3679-2004
| 石油及其制品的试验方法.BS 2000-523:闪点的测定.快速平衡闭杯法
| Methods of test for petroleum and its products - BS 2000-523: Determination of flash point - Rapid equilibrium closed cup method
|
BS EN ISO 3680-2004
| 石油及其制品的试验方法.BS 2000-524:闪点/非闪点的测定.快速平衡闭杯法
| Methods of test for petroleum and its products - BS 2000-524: Determination of flash/no flash - Rapid equilibrium closed cup method
|
BS EN ISO 3830-1996
| 石油产品.汽油中铅含量的测定.一氯化碘法
| Petroleum products - Determination of lead content of gasoline - Iodine monochloride method
|
BS EN ISO 3838-2004
| 石油及其制品的试验方法.BS 2000-189/190:原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞比重瓶
| Methods of test for petroleum and its products - BS 2000-189/190: Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
|
BS EN ISO 3977-5-2002
| 燃气轮机.采购.石油和天然气工业用设施
| Gas turbines - Procurement - Applications for petroleum and natural gas industries
|
BS EN ISO 3993-1996
| 液化石油气和轻质烃类.密度或相对密度的测定.压力石油密度计法
| Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method
|
BS EN ISO 4256-1998
| 液体石油产品.标准蒸气压力的测定.LPG法
| Liquid petroleum products - Determination of gauge vapour pressure - LPG method
|
BS EN ISO 4257-2001
| 石油及其产品的试验方法.液化石油气.取样方法
| Methods of test for petroleum and its products - Liquefied petroleum gases - Method of sampling
|
BS EN ISO 4259-2006
| 石油产品.涉及试验方法的精密数据的测定和应用
| Petroleum products - Determination and application of precision data in relation to methods of test
|
BS EN ISO 4263-1-2005
| 石油和相关产品.抗氧化油和流体的老化性测定.TOST试验.矿物油规程
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for mineral oils
|
BS EN ISO 4263-2-2003
| 石油及其产品.抑制油和流体的老化性的测定.TOST试验.HFC类液压液的试验程序
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for category HFC hydraulic fluids
|
BS EN ISO 4263-3-2006
| 石油及其产品.抑制油和流体的老化性的测定.TOST试验.合成液压液的无水程序
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Anhydrous procedure for synthetic hydraulic fluids
|
BS EN ISO 4263-4-2006
| 石油及其产品.抑制油和流体的老化性的测定.TOST试验.工业齿轮油的程序
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for industrial gear oils
|
BS EN ISO 4264-2007
| 石油产品.四变量公式法计算中间馏分燃料的十六烷指数
| Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation
|
BS EN ISO 4267-2-1990
| 石油和液体石油制品.油量的计算.第2部分:动态测量
| Petroleum and liquid petroleum products - Calculation of oil quantities - Dynamic measurements
|
BS EN ISO 4404-1-2002
| 石油和相关产品.耐火液压油液的抗腐蚀性的测定.含水油液
| Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Water-containing fluids
|
BS EN ISO 4404-2-2003
| 石油和相关产品.难燃液压液抗腐蚀性的测定.不含水液体
| Petroleum and related products - Determination of the corrosion resistance fire-resistant hydraulic fluids - Non-aqueous fluids
|
BS EN ISO 5163-2005
| 石油产品.发动机和航空燃料爆震特性的测定.马达法
| Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method
|
BS EN ISO 5164-2005
| 石油产品.发动机燃料爆震特性的测定.研究方法
| Petroleum products - Determination of knock characteristics of motor fuels - Research method
|
BS EN ISO 5165-1998
| 石油产品.柴油点火质量的测定.十六烷发动机法
| Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method
|
BS EN ISO 6245-2001
| 石油及其产品的试验方法.BS 2000-4:灰分的测定
| Methods of test for petroleum and its products - BS 2000-4: Determination of ash
|
BS EN ISO 6246-1998
| 石油产品.轻馏分燃料和柴油燃料的含胶量.喷射蒸发法
| Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method
|
BS EN ISO 6251-1998
| 液化石油气.对铜的腐蚀作用.铜条试验
| Liquid petroleum gases - Corrosiveness to copper - Copper strip test
|
BS EN ISO 6551-1983
| 石油液体和气体.动态测量的精确性可靠性.电脉冲数据和/或电子脉冲数据的电缆传输
| Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data
|
BS EN ISO 6808-2001
| 石油类液体抽吸和低压排放用塑料软管和软管组件.规范
| Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
|
BS EN ISO 734-1-2006
| 油料种子残渣.测定油含量.已烷萃取法(轻质石油)
| Oilseed meals - Determination of oil content - Extraction method with hexane (or light petroleum)
|
BS EN ISO 7536-1996
| 石油及其产品的试验方法.石油产品.汽油耐氧化性测定.诱导期方法
| Methods of test for petroleum and its products - Petroleum products - Determination of oxidation stability of gasoline - Induction period method
|
BS EN ISO 8222-2002
| 石油测量系统.校准.校准容积检验槽时用的温度修正值
| Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
|
BS EN ISO 8754-2003
| 石油产品.硫含量的测定.能量分散X射线荧光光谱测定法
| Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
|
BS EN ISO 8819-1995
| 石油及其产品的试验方法.液化石油气.硫化氢的测定.乙酸铅法
| Methods of test for petroleum and its products - Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method
|
BS EN ISO 8973-1999
| 液化石油气.密度和蒸气压力的计算方法
| Liquefied petroleum gases - Calculation method for density and vapour pressure
|
BS EN ISO 9029-1997
| 石油和石油产品的试验方法.原油.水含量的测定.蒸馏法
| Methods of test for petroleum and its products - Crude petroleum - Determination of water - Distillation method
|
BS ISO 10405-2001
| 石油和天燃气工业.套管和管道的维护和使用
| Petroleum and natural gas industries - Care and use of casing and tubing
|
BS ISO 10414-1-2001
| 石油和天然气工业.钻探油液的现场试验.水基油液
| Petroleum and natural gas industries - Field testing of drilling fluids - Water-based fluids - Part 1: Water-based fluids
|
BS ISO 10414-2-2002
| 石油和天然气工业.钻井流体的现场试验.油基的液体
| Petroleum and natural gas industries - Field testing of drilling fluids - Oil-based fluids
|
BS ISO 10416-2002
| 石油和天然气工业.钻井液.实验室试验
| Petroleum and natural gas industries - Drilling fluids - Laboratory testing
|
BS ISO 10425-2003
| 石油和天然气工业用钢丝绳.最低要求和验收条件
| Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
|
BS ISO 10426-3-2003
| 石油和天然气工业.油井固井用水泥和材料.深水油井水泥成分的测试
| Petroleum and natural gas industries - Cements and materials for well cementing - Testing of deepwater well cement formulations
|
BS ISO 11563-2003
| 原油和石油产品.散货运输.实现管道满度的指南
| Crude petroleum and petroleum products - Bulk cargo transfer - Guidelines for achieving the fullness of pipelines
|
BS ISO 12917-1-2002
| 石油和液化石油产品.卧式圆桶罐的校验.手工方法
| Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Manual methods
|
BS ISO 12917-2-2002
| 石油和液化石油产品.卧式圆桶罐的校验.内光电距离测量法
| Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Internal electro-optical distance-ranging method
|
BS ISO 13357-1-2002
| 石油产品.润滑油可过滤性测定.含水油过滤的程序
| Petroleum products - Determination of the filterability of lubricating oils - Procedure for oils in the presence of water
|
BS ISO 13357-2-2005
| 石油产品.润滑油可过滤性测定.干油程序
| Petroleum products - Determination of the filterability of lubricating oils - Procedure for dry oils
|
BS ISO 13501-2006
| 石油和天然气工业.钻井液.作业系统评估
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation
|
BS ISO 13503-1-2003
| 石油和天然气工业.完井液和材料.完井液粘性的测量
| Petroleum and natural gas industries - Completion fluids and materials - Measurement of viscous properties of completion fluids
|
BS ISO 13628-5-2002
| 石油和天然气工业.海底开采系统的设计和操作.海底开采控制系统联系缆
| Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea umbilicals
|
BS ISO 13628-7-2005
| 石油和天然气工业.水下采油系统的设计和操作.完井/修井提升管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Completion/workover riser systems
|
BS ISO 13628-8-2002
| 石油和天然气工业.海底采油系统的设计和操作.海底开采控制系统的遥控运送装置的接口
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems
|
BS ISO 13628-9-2001
| 石油和天然气工业.海底开采系统的设计和运行.远程操作工具(ROT)介入系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated tool (ROT) intervention systems
|
BS ISO 13678-2001
| 石油和天然气工业.与铸件、管材和管道一起使用的螺纹复合物制件的评价和试验
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe
|
BS ISO 13679-2003
| 石油和天然气工业.套管和管道连接的检验规程
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections
|
BS ISO 13691-2002
| 石油和天然气工业.高速专用齿轮装置
| Petroleum and natural gas industries - High-speed special-purpose gear units
|
BS ISO 13704-2002
| 石油和天然气工业.炼油厂中加热器管厚度的校准
| Petroleum and natural gas industries - Calculation of heater-tube thickness in petroleum refineries
|
BS ISO 13737-2004
| 石油及其制品的试验方法.BS 2000-527:石油制品及润滑剂.润滑脂低温针入度的测定
| Method of test for petroleum and its products - BS 2000-527: Petroleum products and lubricants - Determination of low-temperature cone penetration of lubricating greases
|
BS ISO 13740-1999
| 原油及石油产品.运输量的计算.远洋油轮装载和卸载时容器经验参数的评估
| Crude petroleum and petroleum products - Transfer accountability - Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels
|
BS ISO 13775-2-2000
| 汽车用热塑管和软管.石油类燃料用
| Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications
|
BS ISO 13879-2000
| 石油和天然气工业.功能规范的内容和起草
| Petroleum and natural gas industries - Content and drafting of functional specifications
|
BS ISO 13880-2000
| 石油和天然气工业.技术规范的内容和起草
| Petroleum and natural gas industries - Content and drafting of a technical specification
|
BS ISO 14245-2006
| 储气瓶.液化石油气瓶阀门的规范和试验.自动关闭
| Gas cylinders - Specification and testing of LPG cylinder valves - Self-closing
|
BS ISO 14435-2006
| 铝生产用含碳材料.石油焦.用感应耦合等离子体原子发射光谱测定法测定痕量金属
| Carbonaceous materials for the production of aluminium - Petroleum coke - Determination of trace metals by inductively coupled plasma atomic emission spectrometry
|
BS ISO 15169-2004
| 石油和液态石油产品.使用混合罐测量系统测定立式圆筒状油罐中烃类的体积、密度和质量
| Petroleum and liquid petroleum products - Determination of volume , density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
|
BS ISO 15544-2001
| 石油和天然气工业.海上开采装置.紧急响应的要求和指南
| Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response - Requirements and guidelines for emergency response
|
BS ISO 15597-2004
| 石油和石油产品试验方法.BS 2000-503:氯和溴含量的测定.波长色散X射线荧光光谱测定法
| Methods of test for petroleum and its products - BS 2000-503: Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry
|
BS ISO 15649-2001
| 石油和天然气工业.管道
| Petroleum and natural gas industries - Piping
|
BS ISO 15663-1-2001
| 石油和天然气工业.寿命周期成本.方法学
| Petroleum and natural gas industries - Life cycle costing - Methodology
|
BS ISO 15663-2-2001
| 石油和天然气工业.寿命周期成本.方法论的应用和计算方法指南
| Petroleum and natural gas industries - Life cycle costing - Guidance on application of methodology and calculation methods
|
BS ISO 15663-3-2001
| 石油和天然气工业.生命周期成本.实施指南
| Petroleum and natural gas industries - Life cycle costing - Implementation guidelines - Part 3: Implementation guidelines
|
BS ISO 15911-2001
| 石油及其制品的试验方法.采用氢含量数据对航空涡轮发动机燃料净单位能量的评估
| Methods of test for petroleum and its products - Estimation of net specific energy of aviation turbine fuels using hydrogen content data
|
BS ISO 15995-2006
| 储气瓶.液化石油气瓶阀门的规范和试验.手工操作
| Gas cylinders - Specification and testing of LPG cylinder valves - Manually operated
|
BS ISO 17776-2001
| 石油和天然气工业.近海生产装置.危险识别和风险评估用工具和技术指南
| Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment
|
BS ISO 19903-2007
| 石油和天然气工业.固定混凝土海上平台
| Petroleum and natural gas industries - Fixed concrete offshore structures
|
BS ISO 19904-1-2006
| 石油和天然气工业.漂浮海上设施.单体船、半潜水船和轻甲板船
| Petroleum and natural gas industries - Floating offshore structures - Monohulls, semi-submersibles and spars
|
BS ISO 1998-1-1999
| 石油工业.术语.原料和产品
| Petroleum industry - Terminology - Raw materials and products
|
BS ISO 1998-2-1999
| 石油工业.术语.性质和试验
| Petroleum industry - Terminology - Properties and tests
|
BS ISO 1998-3-1999
| 石油工业.术语.第3部分:勘探和采油
| Petroleum industry - Terminology - Exploration and production
|
BS ISO 1998-4-1999
| 石油工业.术语.第4部分:炼制
| Petroleum industry - Terminology - Refining
|
BS ISO 1998-5-1999
| 石油工业.术语.第5部分:运输,储存,分配
| Petroleum industry - Terminology - Transport, storage, distribution
|
BS ISO 1998-6-2000
| 石油工业.术语.测量
| Petroleum industry - Terminology - Measurement
|
BS ISO 1998-7-1999
| 石油工业.术语.第7部分:其他术语
| Petroleum industry - Terminology - Miscellaneous terms
|
BS ISO 1998-99-2000
| 石油工业.术语.通用术语和索引
| Petroleum industry - Terminology - General and index
|
BS ISO 20203-2006
| 铝生产用碳素材料.煅烧焦炭.用X射线衍射法测定煅烧石油焦炭的晶体粒度
| Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction
|
BS ISO 20826-2006
| 车载液化石油气装置部件.容器
| Automotive LPG components - Containers
|
BS ISO 20843-2003
| 石油和相关产品.HFAE、HFAS和HFC类中抗燃液压油pH的测定
| Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
|
BS ISO 23251-2006
| 石油、石化和天然气工业.释放压力和解压系统
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems
|
BS ISO 2909-2003
| 石油及其产品的试验方法.石油产品.由运动粘度计算粘度指数
| Methods of test for petroleum and its products - Petroleum products - Calculation of viscosity index from kinematic viscosity
|
BS ISO 3007-2002
| 石油及其产品试验方法.BS 2000-69: 石油产品.蒸汽压力的测定.瑞利法
| Methods of test for petroleum and its products - BS 2000-69: Petroleum products - Determination of vapour pressure - Reid method
|
BS ISO 3977-5-2002
| 燃气轮机.采购.供石油和天然气工业应用
| Gas turbines - Procurement - Applications for petroleum and natural gas industries
|
BS ISO 4266-1-2002
| 石油和液态石油产品.用自动法测定储罐中温度和液面.气罐的液面测量
| Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in atmospheric tanks
|
BS ISO 4266-2-2002
| 石油和液态石油产品.用自动法测定储罐中温度和液面.船用容器的液面测量
| Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in marine vessels
|
BS ISO 4266-3-2002
| 石油和液态石油产品.用自动法测定储罐中温度和液面.加压储罐的液面测量(非冷却的)
| Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in pressurized storage tanks (non-refrigerated)
|
BS ISO 4266-4-2002
| 石油和液态石油产品.用自动法测定储罐中温度和液面.气罐温度的测量
| Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in atmospheric tanks
|
BS ISO 4266-5-2002
| 石油和液态石油产品.用自动法测定储罐中温度和液面.船用容器温度的测量
| Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in marine vessels
|
BS ISO 4266-6-2002
| 石油和液态石油产品.用自动法测定储罐中温度和液面.加压储罐温度的测量(非冷却的)
| Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Measurement of temperature in pressurized storage tanks (non-refrigerated)
|
BS ISO 4268-2000
| 石油和液化石油产品.温度测量.手工方法
| Petroleum and liquid petroleum products - Temperature measurements - Manual methods
|
BS ISO 4269-2001
| 石油和液化石油产品.通过液体测量进行油箱校准.使用容积测量仪的递增法
| Petroleum and liquid petroleum products - Tank calibration by liquid measurement - Incremental method using volumetric meters
|
BS ISO 4404-1-2002
| 石油和相关产品.耐火液压流体的耐腐蚀性能的测定.含水流体
| Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Water-containing fluids
|
BS ISO 4404-1998
| 石油和相关产品.液压系统用含水防火液体的耐腐蚀性测定
| Petroleum and related products - Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
|
BS ISO 4512-2001
| 石油和液态石油产品.储油罐中液位的测量设备.人工法
| Petroleum and liquid petroleum products - Equipment for measurement of liquid levels in storage tanks - Manual methods
|
BS ISO 4925-2005
| 道路车辆.液压系统用非石油基制动液规范
| Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems
|
BS ISO 4926-2007
| 道路车辆.液压制动系统.非石油基基准液
| Road vehicles - Hydraulic braking systems - Non-petroleum-base reference fluids
|
BS ISO 4927-2005
| 道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度120℃)
| Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.)
|
BS ISO 4928-2006
| 道路车辆.使用非石油基液制动液的液压制动系统液压缸的弹性皮碗和密封圈(最高工作温度120℃)
| Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
|
BS ISO 4930-2006
| 道路车辆.非石油基液压制动液的液压制动盘式液压缸用弹性密封垫(最高工作温度150℃)
| Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 °C max.)
|
BS ISO 5024-1999
| 石油液体和液化石油气体.测量.标准参照条件
| Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions
|
BS ISO 6117-2005
| 道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度100℃)
| Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100?C max.)
|
BS ISO 6118-2006
| 道路车辆.使用非石油基制动液的液压制动促动缸的弹性皮碗和密封圈(最高工作温度70℃)
| Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.)
|
BS ISO 6245-2001
| 石油产品.灰分的测定
| Petroleum products - Determination of ash
|
BS ISO 6296-2003
| 石油及其产品的试验方法.石油产品.水的测定.电位测量卡尔·费休滴定法
| Methods of test for petroleum and its products - Petroleum product - Determination of water - Potentiometric Karl Fischer titration method
|
BS ISO 7507-1-2004
| 石油和液态石油产品.立式圆筒状油罐的标定.容量计量法
| Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Strapping method
|
BS ISO 7507-3-2007
| 石油和液态石油产品.直立式储油罐刻度.光学三角测量法
| Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Optical-triangulation method
|
BS ISO 7507-5-2000
| 石油和液态石油产品.直立式圆筒状油罐的标定.电光外测距离法
| Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - External electro-optical distance-ranging method
|
BS ISO 8216-1-2006
| 石油产品.燃料(F级).分类.船用燃料的种类
| Petroleum products - Fuels (class F) - Classification - Categories of marine fuels
|
BS ISO 8216-99-2002
| 石油产品.燃料(F级).分类.总则
| Petroleum products - Fuels (class F) - Classification - General
|
BS ISO 8217-2006
| 石油产品.燃料(F类).船用燃料规范
| Petroleum products - Fuels (class F) - Specifications of marine fuels
|
BS ISO 8697-2000
| 原油和石油产品.运输的可计算性.装船数量和留在船上的油料数量的评定
| Crude petroleum and petroleum products - Transfer accountability - Assessment of on board quantity (OBQ) and quantity remaining on board (ROB)
|
BS ISO 8789-1995
| 机动车辆运送石油液化气用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification
|
BS ISO/TR 13739-2000
| 石油产品.船用燃料传输到船上的实施程序的规定方法
| Petroleum products - Methods of specifying practical procedures for the transfer of bunker fuels to ships
|
Institute of Petroleum-2001
| 石油和相关产品的分析和试验标准方法与BS标准2000部分-2001
| Standard methods for analysis and testing of petroleum and related products, and British Standard 2000 Parts, 2001
|
PD ISO/TR 13881-2001
| 石油和天然气工业.产品、加工和服务的分类和符合性评定
| Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services
|
编号 | 中文名称 | 英文名称 |