| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 1995-4-2005
| 沥青和沥青粘合剂.粘合剂要求.第4部分:石油稀释沥青
| Bitumen and bituminous binders - Requirements for the binders - Part 4: Petroleum cut-back bitumen
|
| DIN 30693-1980
| 液化石油气用软管的防断裂安全防护装置
| Safety devices against rupture of flexible tubes for LPG
|
| DIN 30697-3-1990
| 便携式风扇辅助空气加热器.带热交换器的烧烧液化石油气的空气加热器.第3部分:安全要求、试验标记
| Portable fan-assisted air heaters; LPG-fired air heaters with heat-exchanger; safety requirements, testing marking
|
| DIN 4681-2-1984
| 地下设备用带护套的钢制固定位置液化石油气压力容器.尺寸、设备
| Steel fixed site pressurized LPG tanks with jacket for underground installation; dimensions, equipment
|
| DIN 4815-4-1987
| 液化石油气用软管.车辆燃气装置用软管和软管组件
| Hoses for LPG; hoses and hose assemblies for fuel gas installations in vehicles
|
| DIN 51363-2-2003
| 石油产品测试.润滑油及润滑油添加剂磷含量测定.第2部分:波长色散Ｘ射线光谱分析法
| Testing of petroleum products - Determination of phosphorus content of lubricating oils and additives - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRS)
|
| DIN 51363-3-2001
| 石油产品检测.润滑油及润滑油添加剂磷含量测定.第3部分:感应耦合等离子体发射光谱分析法直接测定
| Testing of petroleum products - Determination of phosphorous content of lubricating oils and additives - Part 3: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
|
| DIN 51390-4-2000
| 石油产品的检验.硅含量测定.第4部分:感应耦合等离子体发射的光谱分析直接测定法
| Testing of petroleum products - Determination of silicone content - Part 4: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
|
| DIN 51405-2004
| 色漆和清漆用石油烃类、类似的液体和溶剂.气体色谱法分析.一般的工作原理
| Testing of mineral oil hydrocarbons, similar liquids and solvents for paints and varnishes - Analysis by gas chromatography - General working principles
|
| DIN 51408-1-1983
| 液态石油碳氢化合物的检验.燃烧法测定氯含量.Wickboid燃烧法
| Testing of liquid petroleum hydrocarbons; determination of chlorine content; Wickbold combustion method
|
| DIN 51412-1-2005
| 石油产品试验.电导性测定.第1部分:实验室法
| Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method
|
| DIN 51412-2-2006
| 石油制品的检验.电气导电率测定.第2部分:现场试验法
| Testing of petroleum products - Determination of the electrical conductivity - Part 2: Field method
|
| DIN 51413-2-1984
| 用气相色谱法分析液化石油产品.测定苯含量
| Analysis of liquid petroleum products by gas chromatography; determination of benzene content
|
| DIN 51413-9-2000
| 液态石油烃试验.气相色谱分析法.第9部分:采用柱转换程序对总芳烃和苯含量的测定
| Testing of liquid petroleum hydrocarbons - Analysis by gas chromatography - Part 9: Determination of total aromatics and benzene by column switching procedure
|
| DIN 51429-1-2000
| 石油产品的检验.所选痕量元素的测定.第1部分:经过特定焚烧和分解方法后的原子吸收分光光度测定法
| Testing of petroleum products - Determination of selected trace elements - Part 1: Atomic absorption spectrometry after specific incineration and digestion methods
|
| DIN 51435-1989
| 石油产品检验.沸点范围测定.气体色谱法
| Testing of petroleum products; determination of boiling range distribution; gas chromatography method
|
| DIN 51436-1989
| 石油制品的试验.航空涡轮机燃料中防冰冻剂含量的测定.红外线光谱测定法
| Testing of petroleum products; determination of the content of icing inhibitors in aviation turbine fuels; infrared spectrometry
|
| DIN 51444-2003
| 石油产品的试验.氮含量测定.使用化学发光检测器的氧化燃烧法
| Testing of petroleum products - Determination of nitrogen - Oxidative combustion method with chemiluminescence detector
|
| DIN 51451-2004
| 石油产品及相关产品的检验.红外线光谱分析.一般工作原理
| Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
|
| DIN 51460-1-2007
| 石油产品的测试.样品制备的方法.第1部分:微波焚化
| Testing of petroleum products - Method for sample preparation - Part 1: Microwave incineration
|
| DIN 51535-2007
| 石油产品的测试.增压柴油发动机的废气涡轮增压器和中间冷却器中沉积物形成的测定
| Testing of petroleum products - Determination of deposition forming tendency in exhaust turbochargers and intercoolers of supercharged diesel engines
|
| DIN 51575-1984
| 石油产品试验:硫酸盐灰分的测定
| Testing of petroleum products; determination of sulfated ash
|
| DIN 51581-1-2003
| 石油产品检验.蒸发损失测定.第1部分:NOACK试验
| Testing of petroleum products - Determination of evaporation loss - Part 1: Noack test
|
| DIN 51595-2000
| 石油产品的试验.沥青烯含量测定.庚烷沉淀
| Testing of petroleum products - Determination of the content of asphaltenes - Precipitation with heptane
|
| DIN 51610-1983
| 液化石油气检验.取样
| Testing of liquefied petroleum gases; sampling
|
| DIN 51612-1980
| 液化石油气的试验.热值的计算
| Testing of liquefied petroleum gases; calculation of net calorific value
|
| DIN 51613-1966
| 液化石油气体的试验.元素硫和蒸发剩余物的测定
| Testing of Liquefied Petroleum Gases; Determination of Elementary Sulphur and Residue on Evaporation
|
| DIN 51614-1989
| 液化石油气的试验.氨.水和碱溶液质量的监测
| Testing of liquefied petroleum gases; detection of ammonia, water and alkaline solution
|
| DIN 51618-1989
| 液化石油气的试验.15℃.20℃ 和 50℃时密度的计算
| Testing of liquefied petroleum gases; calculation of density at 15 °C, 20 °C and 50 °C
|
| DIN 51619-2004
| 矿物油烃类的检验.液化石油气组分的测定.质量系数0.1%(m/m)的特殊考虑1,3-丁二烯的情况下进行气
| Testing of mineral oil hydrocarbons - Determination of the composition of liquid petroleum gases - Gas chromatographic analysis under special consideration of 1,3-butadiene with mass fractions 0,1 % (m/m)
|
| DIN 51622-1985
| 液化石油气.丙烷、丙烯、丁烷、丁烯及其混合物.要求
| Liquefied petroleum gases; propane, propene, butane, butene and their mixtures; requirements
|
| DIN 51630-1999
| 石油溶剂油.石油醚.要求
| Mineral spirits - Petroleum ether - Requirements
|
| DIN 51631-1999
| 石油溶剂油.特殊沸点的汽油.要求
| Mineral spirits - Special boiling point spirits - Requirements
|
| DIN 51632-1-2001
| 试验溶剂.第1部分:石油溶剂常态.要求和试验
| Test spirit - Part 1: White spirit regular; Requirements and testing
|
| DIN 51632-1-2001
| 试验溶剂.第1部分:石油溶剂常态.要求和试验
| Test spirit - Part 1: White spirit regular; Requirements and testing
|
| DIN 51632-2-2001
| 试验溶剂.第2部分:低芳族含量石油溶剂.要求和试验
| Test spirit - Part 2: White spirit, low aromatics; Requirements and testing
|
| DIN 51640-1989
| 液化石油气的试验.40℃和70℃时蒸气压力的计算
| Testing of liquified petroleum gases; calculation of vapour pressure at 40 °C and 70 °C
|
| DIN 51666-2007
| 石油产品的试验.计算碳含量用合成物和精炼厂可燃气体热值的测定.气相色谱分析法
| Testing of petroleum products - Determination of composition for calculation of carbon content and calorific value of heating gas from refineries - Gas chromatography method
|
| DIN 51750-1-1990
| 石油产品的取样.一般信息
| Sampling of petroleum products; general information
|
| DIN 51750-2-1990
| 液态石油产品的取样
| Sampling of liquid petroleum products
|
| DIN 51750-3-1991
| 第3部分:糊状物和石油制品的取样
| Sampling of pasty and solid petroleum products
|
| DIN 51769-9-1981
| 石油产品的检验.铅质量比重级别为50至1000myg/kg的液体矿物油碳氢化合物中铅含量(总铅量)测定.一氯化碘分解
| Testing of petroleum products; determination of the lead content (total lead) of liquid mineral oil hydrocarbons with a mass fraction of lead of 50 to 1000 g/kg; iodine monochlorid disentegratien; extraction with dithizone and photometric determination of the lead dithizone complex
|
| DIN 52006-2-2006
| 沥青和沥青粘合剂.水对粘合剂涂层作用的测定试验方法.第2部分:石油轻制粘合剂涂层
| Bitumen and bituminous binders - Test methods for the determination of the effect of water on binder coatings - Part 2: Petroleum cutback binder coating
|
| DIN 52045-1-2006
| 沥青和沥青粘接剂的检验.蒸发试验.第1部分:石油稀释沥青制品的检验
| Bitumen and bituminous binders - Evaporation test - Part 1: Testing of petroleum cut-back bitumen
|
| DIN 5881-1-1990
| 石油工业.第1部分:钢丝绳和绳索传动.钢丝绳
| Petroleum industry; wire ropes and rope reeving; wire ropes
|
| DIN 5881-2-1979
| 石油工业.钢丝绳和绳索支索.绳索支索
| Petroleum industry; wire ropes and rope reeving, rope reeving
|
| DIN EN 12177 Berichtigung 1-2006
| 液化石油产品.无铅汽油.气相色谱法测定苯含量
| Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography; German version EN 12177:1998, Corrigenda to DIN EN 12177:1998-08; German version EN 12177:1998/AC:2000
|
| DIN EN 12177-1998
| 液体石油制品.无铅汽油.用气体色谱法测定苯含量
| Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography; German version EN 12177:1998
|
| DIN EN 12252-2006
| 液化石油气(LPG)设备和附件.液化石油气道路油罐的装备
| LPG equipment and accessories - Equipping of LPG road tankers; German version EN 12252:2005
|
| DIN EN 12493-2001
| 液化石油气(LPG)用焊接钢罐.槽罐车.设计和生产
| Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture; German version EN 12493:2001
|
| DIN EN 12542-2005
| 地上设备用储存容量不超过13M<(hoch)3>的系列生产的液化石油气储存用固定焊接的圆柱形钢罐.设计和制造
| Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> and for installation above ground - Design and manufacture; German version EN 12542:2002 + A1:2004
|
| DIN EN 12569-2001
| 工业阀门.化学和石油化工工业用阀门.要求和试验
| Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests (includes Corrigendum AC:2000); German version EN 12569:1999 + AC:2000
|
| DIN EN 12634-1999
| 石油制品和润滑剂.酸值的测定.无水介质电位滴定分析法
| Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method; German version EN 12634:1998
|
| DIN EN 12662-1998
| 液化石油产品.中间蒸馏物的污染度的测定
| Liquid petroleum products - Determination of contamination in middle distillates; German version EN 12662:1998
|
| DIN EN 12766-1-2000
| 石油产品和用过的油.多氯联苯和相关产品的测定.第1部分:使用电子俘获检测器(ECD)的气相色谱法(GC)分离和测
| Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD); German version EN 12766-1:2000
|
| DIN EN 12766-2-2001
| 石油产品和用过的油.多氯联苯和相关产品测定.第2部分:多氯联苯(PCB)含量计算
| Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content; German version EN 12766-2:2001
|
| DIN EN 12766-3 Berichtigung 1-2007
| 石油产品和用过的油.多氯联苯(PCBs)和相关产品的测定.第3部分:用电子捕获检测器(ECD)的气相色谱法(GC)测定
| Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD); German version EN 12766-3:2004, Corrigenda to DIN EN 12766-3:2005-02; German version EN 12766-3:2004/AC:2007
|
| DIN EN 12766-3-2005
| 石油产品和用过的油.多氯联苯和相关产品的测定.第3部分:用电子俘获探测器的气相色谱法测定多氯三联苯(PCT)
| Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD); German version EN 12766-3:2004
|
| DIN EN 12805-2002
| 汽车液化石油气成分.容器
| Automotive LPG components - Containers; German version EN 12805:2002
|
| DIN EN 12806-2003
| 机动车用液化石油气元部件.容器以外的元部件
| Automotive liquefied petroleum gas components - Other than containers; German version EN 12806:2003
|
| DIN EN 12807-2001
| 液化石油气用便携式可再充填的钎焊钢瓶.设计和制造.
| Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction; German version EN 12807:2001
|
| DIN EN 12816-2001
| 可运输可再充填钢、铝液化石油气瓶.处置
| Transportable refillable steel and aluminium LPG cylinders - Disposal; German version EN 12816:2001
|
| DIN EN 12817-2006
| 液化石油气储罐(LPG).地上用储存容量可达并包括13立方米的液化石油气储罐检验和重新质量验证
| LPG equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m overground (includes Amendment A1:2006) English version of DIN EN 12817:2006-06
|
| DIN EN 12818-2006
| 液化石油气设备和附件.地下储存容量为13立方米及以下的液化石油气储罐的检验和重新鉴定
| LPG equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m underground (includes Amendment A1:2006) English version of DIN EN 12818:2006-05
|
| DIN EN 12819-2002
| 地上储存容量大于13立方米的液化石油气储罐的检验和重新质量验证; 德文版本 EN 12819:2002
| Inspection and requalification of LPG tanks greater than 13 m<(hoch)3> overground; German version EN 12819:2002
|
| DIN EN 12819-2002
| 地上储存容量大于13立方米的液化石油气储罐的检验和重新质量验证; 德文版本 EN 12819:2002
| Inspection and requalification of LPG tanks greater than 13 m<(hoch)3> overground; German version EN 12819:2002
|
| DIN EN 12820-2002
| 地下储存容量大于13立方米的液化石油气储罐的检验和重新质量验证; 德文版本 EN 12820:2002
| Inspection and requalification of LPG tanks greater than 13 m<(hoch)3> underground; German version EN 12820:2002
|
| DIN EN 12820-2002
| 地下储存容量大于13立方米的液化石油气储罐的检验和重新质量验证; 德文版本 EN 12820:2002
| Inspection and requalification of LPG tanks greater than 13 m<(hoch)3> underground; German version EN 12820:2002
|
| DIN EN 12916-2006
| 石油产品.中间馏出物芳烃种类测定.折射指数测定的高效液相色谱法
| Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection; English version of DIN EN 12916:2006-08
|
| DIN EN 12979-2002
| 自动液化石油气系统.安装要求; 德文版本 EN 12979:2001
| Automotive LPG-systems - Installation requirements; German version EN 12979:2001
|
| DIN EN 13016-1-2007
| 液化石油产品.蒸气压力.第1部分:气体饱和蒸气压(ASVP)的测定和计算的干蒸气压当量值(DVPE)
| Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); German version EN 13016-1:2007
|
| DIN EN 13016-2-2007
| 液化石油产品.蒸气压力.第2部分:40℃和100℃之间绝对压力(AVP)的测定
| Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure (AVP) between 40 °C and 100 °C; German version EN 13016-2:2007
|
| DIN EN 13109-2003
| 液化石油气罐.处置
| LPG tanks - Disposal; German version EN 13109:2002
|
| DIN EN 13110-2003
| 可运输可灌装液化石油气焊接铝瓶.设计和制造
| Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction; German version EN 13110:2002
|
| DIN EN 13110-2003
| 可运输可灌装液化石油气焊接铝瓶.设计和制造
| Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction; German version EN 13110:2002
|
| DIN EN 13131-2000
| 液化石油产品.镍和钒含量的测定.原子吸收光谱测定法
| Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method; German version EN 13131:2000
|
| DIN EN 13131-2000
| 液化石油产品.镍和钒含量的测定.原子吸收光谱测定法
| Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method; German version EN 13131:2000
|
| DIN EN 13132-2002
| 液体石油制品.无铅汽油.采用柱转换气相色谱法测定有机氧化合物和有机键合氧含量; 德文版本 EN 13132:2000
| Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching; German version EN 13132:2000
|
| DIN EN 13152-2003
| 自闭合式液化石油气储气瓶阀的规范和检验
| Specification and testing of LPG cylinder valves - Self closing (includes Amendment A1:2003); German version EN 13152:2001 + A1:2003
|
| DIN EN 13153-2003
| 手工操作的液化石油气瓶阀门的规范和试验
| Specification and testing for liquefied petroleum gas (LPG) cylinder valves - Manually operated (includes Amendment A1:2003); German version EN 13153:2001 + A1:2003
|
| DIN EN 13357-2003
| 沥青和沥青粘合剂.石油轻制和软制沥青流出时间测定
| Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens; German version EN 13357:2002
|
| DIN EN 13358-2004
| 沥青和沥青粘结剂.石油稀释沥青产品的蒸馏特性测定
| Bitumen and bituminous binders - Determination of the distillation characteristics of petroleum cut-back bitumen products; German version EN 13358:2004
|
| DIN EN 13616 Berichtigung 1-2006
| 液体石油燃料用固定罐的防溢流设备.对DIN EN 13616-2004的勘误
| Overfill prevention devices for static tanks for liquid petroleum fuels, German version EN 13616:2004, Corrigenda to DIN EN 13616:2004-09; German version EN 13616:2004/AC:2006
|
| DIN EN 13616-2004
| 液体石油燃料用固定罐的防溢流装置
| Overfill prevention devices for static tanks for liquid petroleum fuels, German version EN 13616:2004
|
| DIN EN 13723-2002
| 石油产品.汽油中低铅含量的测定.波长色散X射线荧光光谱法 (XRF); 德文版本 EN 13723:2002
| Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF); German version EN 13723:2002
|
| DIN EN 13760-2003
| 轻型和重型车辆用汽车液化石油气灌充设备.喷嘴的试验要求和尺寸
| Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions; German version EN 13760:2003
|
| DIN EN 13766-2003
| 液化石油气和液化天然气输送热塑性多层非硫化软管和软管组件.规范
| Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification; German version EN 13766:2003
|
| DIN EN 13776-2002
| 液化石油气负载公路油罐车的灌装和卸料程序; 德文版本 EN 13776:2002
| Filling and discharge procedures for LPG road tankers; German version EN 13776:2002
|
| DIN EN 13799-2003
| 液化石油气(LPG)储气罐容量表
| Contents gauges for LPG tanks; German version EN 13799:2002
|
| DIN EN 13799-2003
| 液化石油气(LPG)储气罐容量表
| Contents gauges for LPG tanks; German version EN 13799:2002
|
| DIN EN 13856-2002
| 汽车液化石油气系统用户说明书内容最低要求
| Minimum requirements for the content of the user manual for automotive LPG systems; German version EN 13856:2002
|
| DIN EN 13942-2005
| 石油和天然气工业.管道输送系统.管道阀
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified); English version EN 13942:2003
|
| DIN EN 13952-2006
| 液化石油气设备和附件.LPG 气瓶的填充气程序
| LPG equipment and accessories - Filling procedures for LPG cylinders (includes Amendment A1:2006) English version of DIN EN 13952:2006-05
|
| DIN EN 13953-2007
| 液化石油气设备和附件.液化石油气(LPG)用可移动可充气钢瓶的减压阀
| LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG); German version EN 13953:2003+A1:2007
|
| DIN EN 14075-2005
| 地下设备用储量不大于13 m<(hoch)3>的连续生产的液化石油气储存用固定焊接圆柱形钢罐.设计和制造
| Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> and for installation underground - Design and manufacture; German version EN 14075:2002 +A1:2004
|
| DIN EN 14077-2004
| 石油产品.有机卤素含量的测定.氧化微库仑法
| Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method; German version EN 14077:2003
|
| DIN EN 14077-2004
| 石油产品.有机卤素含量的测定.氧化微库仑法
| Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method; German version EN 14077:2003
|
| DIN EN 14078-2004
| 液化石油产品.中间馏出物中脂肪酸甲脂(FAME)的测定.红外光谱法
| Liquid petroleum products - Determination of fatty acid methyl esters (FAME) in middle distillates - Infrared spectroscopy method; German version EN 14078:2003
|
| DIN EN 14140-2007
| 液化石油气(LPG)设备和组件.液化石油气(LPG)用可移动再填充焊接钢瓶.替代设计和结构
| LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction; German version EN 14140:2003+A1:2006
|
| DIN EN 14161-2004
| 石油和天然气工业.管道传输系统
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified); German and English version EN 14161:2003
|
| DIN EN 14161-2004
| 石油和天然气工业.管道传输系统
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified); German and English version EN 14161:2003
|
| DIN EN 14163 Berichtigung 1-2006
| 石油和天然气工业.管道运输系统.管道焊接
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text german and english, Corrigenda to DIN EN 14163:2002-09; German and English version EN 14163:2001/AC:2006
|
| DIN EN 14163 Berichtigung 1-2006
| 石油和天然气工业.管道运输系统.管道焊接
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text german and english, Corrigenda to DIN EN 14163:2002-09; German and English version EN 14163:2001/AC:2006
|
| DIN EN 14163-2002
| 石油工业和天然气工业.管道输送系统.管路焊接 (ISO 13847:2000, 修订版); 德文版本 EN 14163:2001、德文和
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text German and English
|
| DIN EN 14331-2004
| 液态石油产品.中间馏出材料中脂肪酸甲脂的分离和表征.液相色谱法/气相色谱法
| Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method; German version EN 14331:2004
|
| DIN EN 1442-2006
| LPG设备和组件.液化石油气(LPG)用可移动可再充装焊接钢瓶.设计和建造
| LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction English version of DIN EN 1442:2006-09
|
| DIN EN 14427-2006
| 液化石油气用可运输可再灌装合成气瓶.设计和建造
| Transportable refillable composite cylinders for LPG - Design and construction; German version EN 14427:2004 + A1:2005
|
| DIN EN 14517-2004
| 液化石油产品.石油中碳氢化合物类型和氧化物的测定.多维气体色谱法
| Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method; German version EN 14517:2004
|
| DIN EN 14543-2007
| 专用液化石油气设备规范.伞式庭院加热器.户外和较大通风面积用无管辐射加热器；德文版本EN 14543:2005+A1-2
| Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use; German version EN 14543:2005+A1:2007
|
| DIN EN 14763-2005
| LPG设备和附件.液化石油气用可移动可再填充复合气瓶.填充前后及过程中的检验程序
| LPG equipment and accessories - Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) - Procedure for checking before, during and after filling; German version EN 14763:2005
|
| DIN EN 14767-2006
| LPG设备和附件.液化石油气用可移动可再填充复合气瓶.定期检查.德文版本 EN 14767-2005
| LPG equipment and accessories - Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) - Periodic inspection; German version EN 14767:2005
|
| DIN EN 14794-2005
| 液化石油气设备和附件.液化石油气(LPG)用可运输和可再填充的铝储气瓶.填充前后和填充过程的检查规程；德文
| LPG equipment and accessories - Transportable refillable aluminium cylinders for Liquefied Petroleum Gas (LPG) - Procedure for checking before, during and after filling; German version EN 14794:2005
|
| DIN EN 14795-2006
| 液化石油气设备和附件.液化石油气(LPG)用可运输和可再填充的铝储气瓶.定期检查.德文版本 EN 14975-2005
| LPG equipment and accessories - Transportable refillable aluminium cylinders for Liquefied Petroleum Gas (LPG) - Periodic inspection; German version EN 14795:2005
|
| DIN EN 14832-2005
| 石油和相关产品.耐火磷酸酯液体氧化稳定性和腐蚀性的测定
| Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids; German version EN 14832:2005
|
| DIN EN 14833-2005
| 石油和相关产品.耐火磷酸酯液体水解稳定性的测定
| Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids; German version EN 14833:2005
|
| DIN EN 14841-2006
| 液化石油气(LPG)设备和附件.LPG车载槽罐的卸货程序
| LPG equipment and accessories - Discharge procedures for LPG rail tankers; German version EN 14841:2005
|
| DIN EN 14841-2006
| 液化石油气(LPG)设备和附件.LPG车载槽罐的卸货程序
| LPG equipment and accessories - Discharge procedures for LPG rail tankers; German version EN 14841:2005
|
| DIN EN 14870-1-2005
| 石油和天然气工业.管道输送系统用进气弯头、管件和法兰.第1部分:进气弯头
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified); English version EN 14870-1:2004
|
| DIN EN 14870-2-2005
| 石油和天然气工业.管道输送系统用进气弯管、管件和法兰.第2部分:管件
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified); English version EN 14870-2:2004
|
| DIN EN 14870-3-2006
| 石油和天然气工业.管道输送系统用进气弯管、配件和法兰.第3部分:法兰
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004 modified); English version EN 14870-3:2006
|
| DIN EN 14893-2006
| LPG设备和组件.容积在150升和1000升之间的可运输液化石油气(LPG)焊接钢压力鼓
| LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres; English version of DIN EN 14893:2006-10
|
| DIN EN 14894-2006
| 液化石油气设备和附件.储气瓶和圆桶标记
| LPG equipment and accessories - Cylinder and drum marking English version of DIN EN 14894:2006-08
|
| DIN EN 14912-2006
| LPG设备和组件.在钢瓶的定期检查中液化石油气瓶阀的检查和维修.德文版本EN 14912-2005
| LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders; German version EN 14912:2005
|
| DIN EN 15033-2007
| 车辆和船舶用液化石油气生产卫生热水储水加热器封闭室
| Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats; English version of DIN EN 15033:2007-02
|
| DIN EN 15195-2007
| 液体石油产品.等容室燃烧法测定中间馏出燃料的点火延迟和衍生十六烷值(DCN)
| Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber; German version EN 15195:2007
|
| DIN EN 15199-1-2007
| 石油产品.用气相色谱法测定沸程分布.第1部分:中间馏出物和润滑基础油
| Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils; English version of DIN EN 15199-1:2007-01
|
| DIN EN 15199-2-2007
| 石油产品.用气相色谱法测定沸程分布.第2部分:重馏分和剩余燃料
| Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels; English version of DIN EN 15199-2:2007-01
|
| DIN EN 15202-2007
| 液化石油气设备和附件.液化石油储气瓶阀门出口和相关设备连接件的实际应用尺寸
| LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections; English version of DIN EN 15202:2007-03
|
| DIN EN 15484-2007
| 乙醇是石油的一种混合组分.无机氯化物的测定.电位测量法
| Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method; German version EN 15484:2007
|
| DIN EN 15486-2007
| 石油用作为混合组分的酒精.硫含量的测定.紫外荧光法
| Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method; German version EN 15486:2007
|
| DIN EN 15487-2007
| 乙醇是石油的一种混合组分.磷含量的测定.钼酸铵光谱测定法
| Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method; German version EN 15487:2007
|
| DIN EN 15488-2007
| 乙醇是石油的一种混合组分.铜含量的测定.石墨炉原子吸收光谱法
| Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method; German version EN 15488:2007
|
| DIN EN 15489-2007
| 乙醇是石油的一种混合组分.含水量的测定.卡耳费瑟库仑滴定法
| Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method; German version EN 15489:2007
|
| DIN EN 15490-2007
| 石油用作为混合组分的酒精.pH值的测定
| Ethanol as a blending component for petrol - Determination of pHe; German version EN 15490:2007
|
| DIN EN 15491-2007
| 乙醇是石油的一种混合组分.总酸度的测定.颜色指示滴定法
| Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method; German version EN 15491:2007
|
| DIN EN 15553 Berichtigung 1-2007
| 石油产品和相关材料.烃类型的测定.荧光指示剂吸附法
| Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method; German version EN 15553:2007, Corrigenda to DIN EN 15553:2007-07
|
| DIN EN 15553-2007
| 石油产品和相关材料.烃类型的测定.荧光指示剂吸附法
| Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method; German version EN 15553:2007
|
| DIN EN 1596-2005
| 专用于液化石油器的规范.移动式和便携式非家用强制对流直燃式空气加热器
| Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters; German version EN 1596:1998 + A1:2004
|
| DIN EN 1601-1997
| 液化石油制品.无铅汽油.用气相色谱法(O-FID)测定含氧有机化合物和有机合成氧的全部成份
| Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID); German version EN 1601:1997
|
| DIN EN 1762-2004
| 25巴(2.5MPA)及以下液化石油气、LPG(液相和气相)和天然气用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase) and natural gas up to 25 bar (2,5 MPa) - Specification; German version EN 1762:2003
|
| DIN EN 1919-2000
| 可移动气瓶.液化气(不包括乙炔和液化石油气)用气瓶.填充时的检查
| Transportable gas cylinders - Cylinders for liquefied gases (excluding acetylene and LPG) - Inspection at time of filling; German version EN 1919:2000
|
| DIN EN 1949-2006
| 休闲膳宿车和其他车辆居住用液化石油气系统的安装规范
| Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other vehicles; German version EN 1949:2002 + A1:2005
|
| DIN EN 23015-1994
| 石油产品.烟雾点的测定
| Petroleum products; determination of cloud point (ISO 3015:1992); German version EN 23015:1994
|
| DIN EN 237-2004
| 液态石油产品.汽油.用原子吸收光谱法测定低铅浓度
| Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry; German version EN 237:2004
|
| DIN EN 238-2004
| 液化石油产品.汽油.用红外线光谱测定法测定苯含量
| Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry; German version EN 238:1996 + A1:2003
|
| DIN EN 241-2000
| 液体石油产品.钠含量测定.原子吸收分光光度法
| Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method; German version EN 241:2000
|
| DIN EN 24260-1994
| 石油产品和烃类.硫含量的测定.威克波耳德(Wickbold)燃烧法
| Petroleum products and hydrocarbons; determination of sulfur content; Wickbold combustion method (ISO 4260:1987); German version EN 24260:1994
|
| DIN EN 417-2003
| 便携式燃具用带或不带阀门的一次性使用液化石油气金属气罐.制造、检验、试验和标记
| Non-refillable metallic cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking; German version EN 417:2003
|
| DIN EN 449-2003
| 专用液化石油气装置规范.家用无烟道房间加热器(包括扩散催化燃烧的加热器)
| Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters); German version EN 449:2002
|
| DIN EN 461-2004
| 专用液化石油气装置规范.不超过10kW的无烟道非家用空间加热器
| Specifications for dedicated liquefied petroleum gas appliances - Flueless non-domestic space heaters not exceeding 10 kW; German version EN 461:1999 + A1:2004
|
| DIN EN 484-1998
| 专用液化石油气的装置规范.室外用独立式（包括带烤架的）液化石油气灶具
| Specifications for dedicated liquefied petroleum gas appliances - Independent hotplates, including those incorporating a grill for outdoor use; German version EN 484:1997
|
| DIN EN 498-1998
| 专用液化石油气装置规范.室外用烤架器具
| Specifications for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use; German version EN 498:1997
|
| DIN EN 521-2006
| 专用液化石油气装置的规范.便携式蒸气压液化石油气装置
| Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances English version of DIN EN 521:2006-05
|
| DIN EN 589-2004
| 机动车用燃料.液化石油气(LPG).要求和试验方法
| Automotive fuels - LPG - Requirements and test methods; German version EN 589:2004
|
| DIN EN 589-2004
| 机动车用燃料.液化石油气(LPG).要求和试验方法
| Automotive fuels - LPG - Requirements and test methods; German version EN 589:2004
|
| DIN EN 61221-2005
| 石油产品和润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范
| Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications (IEC 61221:2004); German version EN 61221:2004
|
| DIN EN 624-2001
| 液化石油汽器具专用规范.车船舱室密封液化石油汽加热设备
| Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats; German version EN 624:2000
|
| DIN EN 624/A2-2007
| 专用液化石油气器具规范.在车辆和船舶中用加热设备的封闭液化石油气室
| Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats; German version EN 624:2000/A2:2007
|
| DIN EN 732-1999
| 专门使用液化石油气的器具规范.吸收式冰箱
| Specification for dedicated liquefied petroleum gas appliances - Absorption refrigerators; German version EN 732:1998
|
| DIN EN 858-2-2003
| 轻液体(例如:油和石油)分离器系统.第2部分:标称尺寸、安装、运行和维护的选择
| Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance; German version EN 858-2:2003
|
| DIN EN 976-1-1997
| 玻璃钢制地下槽罐(GRP).石油基液化燃料无压力存储用卧式圆桶罐.第1部分:单壁罐的要求和试验方法
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks; German version EN 976-1:1997
|
| DIN EN 976-2-1997
| 玻璃钢制地下槽罐(GRP).石油基液化燃料无压力存储用卧式圆桶罐.第2部分:运输,搬运,中间存储,单壁罐的安装
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks; German version EN 976-2:1997
|
| DIN EN ISO 10239-2001
| 小型船舶.液化石油气系统
| Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2000); German version EN ISO 10239:2000
|
| DIN EN ISO 10370-1995
| 石油产品.碳渣的测定.显微法 (ISO 10370:1993); 德文版本 EN ISO 10370:1995
| Petroleum products - Determination of carbon residue - Micro method (ISO 10370:1993); German version EN ISO 10370:1995
|
| DIN EN ISO 10405-2007
| 石油和天然气工业.套管和油管的维护和使用
| Petroleum and natural gas industries - Care and use of casing and tubing (ISO 10405:2000); German and English version EN ISO 10405:2006
|
| DIN EN ISO 10417-2005
| 石油和天然气工业.井下安全阀系统.设计、安装、操作和修整
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004); English version EN ISO 10417:2004
|
| DIN EN ISO 10418-2005
| 石油和天然气工业.近海生产装置.基础表面操作安全系统
| Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems (ISO 10418:2003); English version EN ISO 10418:2003
|
| DIN EN ISO 10423-2005
| 石油和天然气工业.钻井和开采设备.井口设施和采油树设备
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2003); English version EN ISO 10423:2004
|
| DIN EN ISO 10424-1-2005
| 石油和天然气工业.旋转钻井设备.第1部分:旋转钻杆元件
| Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004); English version EN ISO 10424-1:2004
|
| DIN EN ISO 10426-1-2007
| 石油和天然气工业.油井固井用水泥和材料.第1部分:规范(ISO 10426-1-2005)
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2005); English version EN ISO 10426-1:2006
|
| DIN EN ISO 10426-2-2006
| 石油和天然气工业.油井固井用水泥和材料.第2部分:油井用水泥的试验(ISO 10426-2-2003 + Amd. 1-2005).英文
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO 10426-2:2003 + Amd. 1:2005); English version EN ISO 10426-2:2003 + A1:2005
|
| DIN EN ISO 10426-3-2005
| 石油和天然气工业.油井固井用水泥和材料.第3部分:深水油井水泥成分的测试
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO 10426-3:2003); English version EN ISO 10426-3:2004
|
| DIN EN ISO 10426-4-2005
| 石油和天然气工业.油井固井用水泥和材料.第4部分:在大气压力下泡沫水泥浆的制备和检验
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO 10426-4:2004); English version EN ISO 10426-4:2004
|
| DIN EN ISO 10426-5-2006
| 石油和天然气工业.油井固井用水泥和材料.第5部分:在大气压力下固井水泥加工制剂的收缩和膨胀的测定(ISO 104
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure (ISO 10426-5:2004); English version EN ISO 10426-5:2005
|
| DIN EN ISO 10427-1-2003
| 石油天然气工业.套管扶正器.第1部分:弓形弹簧式套管扶正器
| Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001); German and English version EN ISO 10427-1:2001
|
| DIN EN ISO 10427-2-2005
| 石油和天然气工业.固井用设备.第2部分:扶正器的放置和限动环的检测
| Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing (ISO 10427-2:2004); English version EN ISO 10427-2:2004
|
| DIN EN ISO 10427-3-2005
| 石油和天然气工业.固井用设备.第3部分:固井浮动式设备的性能试验
| Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment (ISO 10427-3:2003); English version EN ISO 10427-3:2004
|
| DIN EN ISO 10432-2005
| 石油和天然气工业.下降孔设备.地下安全阀设备
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004); English version EN ISO 10432:2004
|
| DIN EN ISO 10434-2005
| 石油、石油化学和相关工业用螺栓帽状钢闸阀
| Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004); German version EN ISO 10434:2004
|
| DIN EN ISO 10437-2005
| 石油、石油化学和天然气工业.专用汽轮机
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003); English version EN ISO 10437:2003
|
| DIN EN ISO 10437-2005
| 石油、石油化学和天然气工业.专用汽轮机
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003); English version EN ISO 10437:2003
|
| DIN EN ISO 10438-1-2005
| 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第1部分:一般要求
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2003); English version EN ISO 10438-1:2003
|
| DIN EN ISO 10438-2-2005
| 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第2部分:专用油系统
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems (ISO 10438-2:2003); English version EN ISO 10438-2:2003
|
| DIN EN ISO 10438-3-2005
| 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第3部分:通用油系统
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2003); English version EN ISO 10438-3:2003
|
| DIN EN ISO 10438-4-2005
| 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第4部分:自动气封支撑系统
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2003); English version EN ISO 10438-4:2003
|
| DIN EN ISO 10439-2004
| 石油、化学、气体工业.离心压缩机
| Petroleum, chemical and lgas service industries - Centrifugal compressors (ISO 10439:2002); German and English version EN ISO 10439:2002
|
| DIN EN ISO 10440-1-2004
| 石油和天然气工业.旋转型容积式压缩机.第1部分:加工压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive displacement compressors - Part 1: Process compressors (oil-free) (ISO 10440-1:2000); German and English version EN ISO 10440-1:2000
|
| DIN EN ISO 10440-1-2004
| 石油和天然气工业.旋转型容积式压缩机.第1部分:加工压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive displacement compressors - Part 1: Process compressors (oil-free) (ISO 10440-1:2000); German and English version EN ISO 10440-1:2000
|
| DIN EN ISO 10440-2-2003
| 石油和天然气工业.旋转型容积式压缩机.第2部分:封装空气压缩机(无油)
| Petroleum and natural gas industries - Rotary type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001); German and English version EN ISO 10440-2:2001
|
| DIN EN ISO 10441-2007
| 石油、石化和天然气工业.机械动力传输用挠性接箍.特殊应用(ISO 10441-2007)
| Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-purpose applications (ISO 10441:2007); English version EN ISO 10441:2007
|
| DIN EN ISO 10442-2005
| 石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机
| Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002); English version EN ISO 10442:2002
|
| DIN EN ISO 11960-2005
| 石油和天然气工业.油井套管或油管用钢管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2004); English version EN ISO 11960:2004
|
| DIN EN ISO 11961-1997
| 石油和天然气工业.钻井杆钢管.要求
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996); German version EN ISO 11961:1996
|
| DIN EN ISO 12185-1997
| 原油和石油产品.密度测定.振荡U形管法
| Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996); German version EN ISO 12185:1996
|
| DIN EN ISO 12205-1996
| 石油产品.中间馏分燃料的氧化安定性测定
| Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995); German version EN ISO 12205:1996
|
| DIN EN ISO 12937-2002
| 石油产品.水含量测定.库氏(Coulometric Karl Fischer)滴定法 (ISO 12937:2000); 德文版本 EN ISO 12937:200
| Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000); German version EN ISO 12937:2000
|
| DIN EN ISO 13500-2006
| 石油和天然气工业.钻井液体材料.规范和试验(ISO 13500-2006)
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2006); English version EN ISO 13500:2006
|
| DIN EN ISO 13501-2007
| 石油和天然气工业.钻井液.加工系统评价
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation (ISO 13501:2005); English version EN ISO 13501:2006
|
| DIN EN ISO 13503-1-2005
| 石油和天然气工业.完井液和材料.第1部分:完井液粘着特性的测量
| Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids (ISO 13503-1:2003); English version EN ISO 13503-1:2005
|
| DIN EN ISO 13503-2-2007
| 石油和天然气工业.完井液和材料.第2部分:水力压裂和砾石填充作业用支撑剂性能测定
| Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations (ISO 13503-2:2006); English version EN ISO 13503-2:2006
|
| DIN EN ISO 13503-3-2006
| 石油和天然气工业.完井液和材料.第3部分:重盐水的试验(ISO 13503-3:2005)
| Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines (ISO 13503-3:2005); English version EN ISO 13503-3:2005
|
| DIN EN ISO 13503-4-2007
| 石油和天然气工业.完井液和材料.第4部分:增产液和砾石填充液静态渗漏测量程序
| Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions (ISO 13503-4:2006); English version EN ISO 13503-4:2006
|
| DIN EN ISO 13503-5-2006
| 石油和天然气工业.完井液和材料.第5部分:测量重盐水长期电导率程序(ISO 13503-5:2006)
| Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006); English version EN ISO 13503-5:2006
|
| DIN EN ISO 13533 Berichtigung 1-2006
| 石油和天然气工业.钻探和生产设备.钻孔设备
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001); German version EN ISO 13533:2001, Corrigenda to DIN EN ISO 13533:2002-12; German version EN ISO 13533:2001/AC:2006
|
| DIN EN ISO 13533-2002
| 石油工业和天然气工业.钻井和生产设备.钻井设备 (ISO 13533:2001); 德文版本 EN ISO 13533:2001 (德文和英
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001); German version EN ISO 13533:2001 (Text in German and English)
|
| DIN EN ISO 13534-2001
| 石油和天然气工业.钻探和生产设备.提升设备的检验、维护、修理和再制造
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000); German version EN ISO 13534:2000
|
| DIN EN ISO 13535-2002
| 石油工业和天然气工业.钻井和生产设备.起重机设备 (ISO 13535:2000); 德文版本 EN ISO 13535:2000 (德文和
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000); German version EN ISO 13535:2000 (German and English texts)
|
| DIN EN ISO 13625-2005
| 石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002); English version EN ISO 13625:2002
|
| DIN EN ISO 13626-2005
| 石油和天然气工业.钻井和生产设备.钻井和井检修结构
| Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures (ISO 13626:2003); English version EN ISO 13626:2004
|
| DIN EN ISO 13628-1-2006
| 石油和天然气工业.水下采油系统的设计和操作.第1部分:一般要求和建议(ISO 13628-1-2005).英文版本 EN ISO 1
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:2005); English version EN ISO 13628-1:2005
|
| DIN EN ISO 13628-10-2007
| 石油和天然气工业.水下开采系统的设计和操作.第10部分:连接柔性管规范
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2005); English version EN ISO 13628-10:2006
|
| DIN EN ISO 13628-2-2006
| 石油天然气工业.海底生产系统设计和操作.第2部分:海底和船用自由软管系统(ISO 13628-2-2006)
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006); English version EN ISO 13628-2:2006
|
| DIN EN ISO 13628-3-2003
| 石油和天然气工业.水下采油系统的设计和操作.第3部分:通流线系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000); German and English version EN ISO 13628-3:2000
|
| DIN EN ISO 13628-4-1999
| 石油和天然气工业.水下生产系统的设计和操作.第4部分:水下井口和主干设备
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999); German version EN ISO 13628-4:1999
|
| DIN EN ISO 13628-7-2007
| 石油和天然气工业.水下采油系统的设计和操作.第7部分:完井/修井提升管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005); English version EN ISO 13628-7:2006
|
| DIN EN ISO 13631-2003
| 石油和天然气工业.封装往复式空气压缩机
| Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002); German and English version EN ISO 13631:2002
|
| DIN EN ISO 13679-2007
| 石油和天然气工业.套管和管道连接器的测试程序(ISO 13679-2002)
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2002); English version EN ISO 13679:2006
|
| DIN EN ISO 13680-2002
| 石油工业和天然气工业.用作套管、铺设管道和连接器材的耐腐蚀合金无缝管.技术交货条件 (ISO 13680:2000);
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000); German version EN ISO 13680:2001
|
| DIN EN ISO 13680-2002
| 石油工业和天然气工业.用作套管、铺设管道和连接器材的耐腐蚀合金无缝管.技术交货条件 (ISO 13680:2000);
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000); German version EN ISO 13680:2001
|
| DIN EN ISO 13691-2003
| 石油和天然气工业.高速专用齿轮机构
| Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002
|
| DIN EN ISO 13702-2000
| 石油和天然气工业.海上生产设备着火和爆炸的控制和减弱.要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999); German version EN ISO 13702:1999
|
| DIN EN ISO 13703-2003
| 石油天然气工业.海上作业平台管道系统的设计和安装
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000 + Cor. 1:2002); German and English version EN ISO 13703:2000 + AC:2002
|
| DIN EN ISO 13705-2007
| 石油和天然气工业.一般炼油厂用火焰加热器
| Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2006); English version EN ISO 13705:2006
|
| DIN EN ISO 13706-2006
| 石油、石化和天然气工业.风冷热交换器 (ISO 13706-2005).英文版本 EN ISO 13706-2005
| Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2005); English version EN ISO 13706:2005
|
| DIN EN ISO 13709-2005
| 石油、石油化工和天然气工业用离心泵
| Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2003); English version EN ISO 13709:2003
|
| DIN EN ISO 13710-2005
| 石油、石油化学和天然气工业.往复式变容真空泵
| Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004); English version EN ISO 13710:2004
|
| DIN EN ISO 13736-2000
| 石油产品和其他液体.闪点的测定.阿贝耳闭口杯法
| Petroleum products and other liquids - Determination of flashpoint - Abel closed cup method (ISO 13736:1997); German version EN ISO 13736:1997
|
| DIN EN ISO 13757-1998
| 液化石油气.油残余物的测定.高温法
| Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996); German version EN ISO 13757:1996
|
| DIN EN ISO 13758-1997
| 液化石油气.丙烷干燥度评估.阀门冻结法
| Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996); German version EN ISO 13758:1996
|
| DIN EN ISO 13759-1997
| 石油产品.柴油中硝酸烷基酯含量测定.光谱法
| Petroleum Products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996); German version EN ISO 13759:1996
|
| DIN EN ISO 14224-2007
| 石油、石化和天然气工业.设备可靠性和维修数据的采集与交换
| Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment (ISO 14224:2006); English version EN ISO 14224:2006
|
| DIN EN ISO 14310-2003
| 石油和天然气工业.下井设备.封隔器和桥塞
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001); German version EN ISO 14310:2001; German and English texts
|
| DIN EN ISO 14691-2002
| 石油和天然气工业.机械动力传输柔性耦合.一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999); German version EN ISO 14691:2000 (German and english text)
|
| DIN EN ISO 14691-2002
| 石油和天然气工业.机械动力传输柔性耦合.一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999); German version EN ISO 14691:2000 (German and english text)
|
| DIN EN ISO 14692-1-2005
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第1部分:词汇、符号、应用和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002); English version EN ISO 14692-1:2002
|
| DIN EN ISO 14692-2 Berichtigung 1-2007
| 石油和天然气工业.玻璃纤维增强塑料.第2部分:生产资格
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002, Corrigenda to DIN EN ISO 14692-2:2005-07; English version EN ISO 14692-2:2002/AC:2006
|
| DIN EN ISO 14692-2 Berichtigung 1-2007
| 石油和天然气工业.玻璃纤维增强塑料.第2部分:生产资格
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002, Corrigenda to DIN EN ISO 14692-2:2005-07; English version EN ISO 14692-2:2002/AC:2006
|
| DIN EN ISO 14692-2-2005
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第2部分:合格鉴定和制造
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002
|
| DIN EN ISO 14692-3 Berichtigung 1-2007
| 石油和天然气工业.玻璃纤维增强塑料管.第3部分:系统管道
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002, Corrigenda to DIN EN ISO 14692-3:2005-07; English version EN ISO 14692-3:2002/AC:2006
|
| DIN EN ISO 14692-3-2005
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第3部分:系统设计
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002
|
| DIN EN ISO 14692-4-2005
| 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第4部分:制造、安装和操作
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002); English version EN ISO 14692-4:2002
|
| DIN EN ISO 14693-2005
| 石油和天然气工业.钻井和油井辅助设备
| Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003); English version EN ISO 14693:2003
|
| DIN EN ISO 14723-2003
| 石油和天然气工业.管道输送系统.海底管道阀
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001
|
| DIN EN ISO 14935-1998
| 石油及其相关产品.耐火流体的吸油绳火焰持续时间的测定
| Petroleum and related products - Determination of wickflame persistence of fire-resistant fluids (ISO 14935:1998); German version EN ISO 14935:1998
|
| DIN EN ISO 15029-1-2002
| 石油和相关产品.耐火液体喷射点燃特性测定.第1部分:喷射火焰持久性.空心喷射器法
| Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistance; Hollow-cone nozzle method (ISO 15029-1:1999); German version EN ISO 15029-1:1999
|
| DIN EN ISO 15029-1-2002
| 石油和相关产品.耐火液体喷射点燃特性测定.第1部分:喷射火焰持久性.空心喷射器法
| Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistance; Hollow-cone nozzle method (ISO 15029-1:1999); German version EN ISO 15029-1:1999
|
| DIN EN ISO 15136-1-2002
| 石油工业和天然气工业用钻孔设备.人工升降机用行进式空腔泵系统.第1部分:泵 (ISO 15136-1:2001); 德文版本
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001); German version EN ISO 15136-1:2001
|
| DIN EN ISO 15138-2003
| 石油和天然气工业.海上生产设备.供热、通风和空调设备
| Petroleum and natural gas industries - Offshore production installation - Heating, ventilation and air-conditioning (ISO 15138:2000 plus Technical Corrigendum 1:2001); German and English version EN ISO 15138:2000 + AC:2002
|
| DIN EN ISO 15156-1 Berichtigung 1-2007
| 石油和天然气工业.在含硫化氢(H2S)环境下的油和气生产中用材料.第1部分:耐裂化材料选择的一般原则
| Petroleum and natural gas industries - Material for use in H2S containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001, Corrigenda to DIN EN ISO 15156-1:2003-05; German and English version EN ISO 15156-1:2001/AC:2006
|
| DIN EN ISO 15156-1 Berichtigung 1-2007
| 石油和天然气工业.在含硫化氢(H2S)环境下的油和气生产中用材料.第1部分:耐裂化材料选择的一般原则
| Petroleum and natural gas industries - Material for use in H2S containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001, Corrigenda to DIN EN ISO 15156-1:2003-05; German and English version EN ISO 15156-1:2001/AC:2006
|
| DIN EN ISO 15156-1-2003
| 石油和天然气工业.石油和天然气生产中用于含H2S环境的材料.第1部分:耐裂材料选用通则
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001
|
| DIN EN ISO 15156-2 Berichtigung 1-2007
| 石油和天然气工业.在含硫化氢(H2S)环境下的油和气生产中用材料.第2部分:耐裂化碳、低合金钢和铸铁的使用
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003); English version EN ISO 15156-2:2003, Corrigenda to DIN EN ISO 15156-2:2005-07; English version EN ISO 15156-2:2003/AC:2006
|
| DIN EN ISO 15156-2 Berichtigung 1-2007
| 石油和天然气工业.在含硫化氢(H2S)环境下的油和气生产中用材料.第2部分:耐裂化碳、低合金钢和铸铁的使用
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003); English version EN ISO 15156-2:2003, Corrigenda to DIN EN ISO 15156-2:2005-07; English version EN ISO 15156-2:2003/AC:2006
|
| DIN EN ISO 15156-2-2005
| 石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003); English version EN ISO 15156-2:2003
|
| DIN EN ISO 15156-3 Berichtigung 1-2007
| 石油、石化和天然气工业.在油和气生产中含硫化氢(H2S)环境下用材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2003); English version EN ISO 15156-3:2003, Corrigenda to DIN EN ISO 15156-3:2005-07; English version EN ISO 15156-3:2003/AC:2006
|
| DIN EN ISO 15156-3-2005
| 石油、石油化学和天然气工业.油和气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2003); English version EN ISO 15156-3:2003
|
| DIN EN ISO 15463-2005
| 石油和天然气工业.新套管、管和平端钻管的现场检验
| Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe (ISO 15463:2003); English version EN ISO 15463:2003
|
| DIN EN ISO 15463-2005
| 石油和天然气工业.新套管、管和平端钻管的现场检验
| Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe (ISO 15463:2003); English version EN ISO 15463:2003
|
| DIN EN ISO 15544-2007
| 石油和天然气工业.近海开采装置.紧急响应的要求和指南
| Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response (ISO 15544:2000); English version EN ISO 15544:2007
|
| DIN EN ISO 15546-2007
| 石油和天然气工业.铝合金钻杆
| Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2007); English version EN ISO 15546:2007
|
| DIN EN ISO 15547-1-2006
| 石油、石化和天然气工业.板式热交换器.第1部分:板框式热交换器(ISO 15547-1-2005).英文版本 EN ISO 15547-1
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers (ISO 15547-1:2005); English version EN ISO 15547-1:2005
|
| DIN EN ISO 15547-2-2006
| 石油、石化和天然气工业.板式热交换器.第2部分:铜焊铝板热交换器(ISO 15547-2-2005).英文版本 EN ISO 15547
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers (ISO 15547-2:2005); English version EN ISO 15547-2:2005
|
| DIN EN ISO 15761-2003
| 石油和天然气工业用规格为DN 100及更小的钢闸阀、球阀和止回阀
| Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text)
|
| DIN EN ISO 16070-2006
| 石油和天然气工业.下井设备.锁芯轴和落地接头
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005); English version EN ISO 16070:2005
|
| DIN EN ISO 16708-2006
| 石油和天然气工业.管道传输系统.基于可靠性的极限状态法（ISO 16708-2006)
| Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods (ISO 16708:2006); English version EN ISO 16708:2006
|
| DIN EN ISO 16812-2007
| 石油、石化和天然气工业.管壳式热交换器
| Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007); English version EN ISO 16812:2007
|
| DIN EN ISO 17078-1-2005
| 石油和天然气工业.钻井和生产设备.第1部分:偏心轴
| Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels (ISO 17078-1:2004); English version EN ISO 17078-1:2004
|
| DIN EN ISO 17292-2004
| 石油、石油化学和相关工业用金属球阀
| Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004); German version EN ISO 17292:2004
|
| DIN EN ISO 17776-2003
| 石油和天然气工业.海上开采装置.危险识别和风险评估用方法和技术指南
| Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000); German and English version EN ISO 17776:2002
|
| DIN EN ISO 19900-2005
| 石油和天然气工业.近海建筑物的一般要求
| Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002); English version EN ISO 19900:2002
|
| DIN EN ISO 19901-1-2006
| 石油和天然气工业.海上建筑物的特殊要求.第1部分:Metocean设计和运行研究(ISO 19901-1-2005).英文版本EN IS
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO 19901-1:2005); English version EN ISO 19901-1:2005
|
| DIN EN ISO 19901-2-2005
| 石油和天然气工业.近海建筑物的特殊要求.第2部分:地震设计规程和标准
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2004); English version EN ISO 19901-2:2004
|
| DIN EN ISO 19901-4-2005
| 石油和天然气工业.近海建筑物的特殊要求.第4部分:土工和地基设计考虑
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003); English version EN ISO 19901-4:2003
|
| DIN EN ISO 19901-4-2005
| 石油和天然气工业.近海建筑物的特殊要求.第4部分:土工和地基设计考虑
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003); English version EN ISO 19901-4:2003
|
| DIN EN ISO 19901-5-2005
| 石油和天然气工业.近海建筑物的特殊要求.第5部分:设计和施工过程中的重量控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003); English version EN ISO 19901-5:2003
|
| DIN EN ISO 19901-7-2006
| 石油和天然气工业.海上建筑物的特殊要求.第7部分:浮动式海上建筑物和移动式海上设备的定位系统(ISO 19901-7
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO 19901-7:2005); English version EN ISO 19901-7:2005
|
| DIN EN ISO 19903-2007
| 石油和天然气工业.固定混凝土海上平台
| Petroleum and natural gas industries - Fixed concrete offshore structures (ISO 19903:2006); English version EN ISO 19903:2006
|
| DIN EN ISO 19904-1-2007
| 石油天然气工业.浮动式海上结构.第1部分:单体船、半潜式平台与平台
| Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006); English version EN ISO 19904-1:2006
|
| DIN EN ISO 20623-2004
| 石油和相关产品.液体的极限压力和抗磨性能的测定.四球法
| Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003); German version EN ISO 20623:2003
|
| DIN EN ISO 20623-2004
| 石油和相关产品.液体的极限压力和抗磨性能的测定.四球法
| Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003); German version EN ISO 20623:2003
|
| DIN EN ISO 20763-2004
| 石油和相关产品.液压液耐磨性能的测定.叶片泵法
| Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004); German version EN ISO 20763:2004
|
| DIN EN ISO 20764-2004
| 石油和相关产品.水含量测定用高沸点液体试验区的准备.氮净化法
| Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003); German version EN ISO 20764:2003
|
| DIN EN ISO 20783-1-2004
| 石油和相关产品.抗火液体的乳剂稳定性测定.第1部分:HFAE类液体
| Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2003); German version EN ISO 20783-1:2003
|
| DIN EN ISO 20783-2-2004
| 石油和相关产品.抗火液体的乳剂稳定性测定.第1部分:HFB类液体
| Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003); German version EN ISO 20783-2:2003
|
| DIN EN ISO 20823-2003
| 石油及相关产品.与热表层接触时易燃性特征的测定.歧管点火试验
| Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003); German version EN ISO 20823:2003
|
| DIN EN ISO 20823-2003
| 石油及相关产品.与热表层接触时易燃性特征的测定.歧管点火试验
| Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003); German version EN ISO 20823:2003
|
| DIN EN ISO 20843-2004
| 石油和相关产品.HFAE、 HFAS和HFC类抗火液体的pH值测定
| Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2003); German version EN ISO 20843:2003
|
| DIN EN ISO 20844-2004
| 石油及其相关产品.利用柴油喷射器嘴测定含聚合物油的剪切稳定性
| Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2004); German version EN ISO 20844:2004
|
| DIN EN ISO 20844-2004
| 石油及其相关产品.利用柴油喷射器嘴测定含聚合物油的剪切稳定性
| Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2004); German version EN ISO 20844:2004
|
| DIN EN ISO 20846-2004
| 石油产品.机动车燃料中硫含量的测定.紫外线荧光法
| Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2004); German version EN ISO 20846:2004
|
| DIN EN ISO 20847-2004
| 石油产品.机动车燃料中硫含量的测定.能量分散X射线荧光光谱法
| Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004); German version EN ISO 20847:2004
|
| DIN EN ISO 20884-2004
| 石油产品.机动车燃料中硫含量的测定.波长分散X射线荧光光谱法
| Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2004); German version EN ISO 20884:2004
|
| DIN EN ISO 21329-2005
| 石油和天然气工业.管道运输系统.机械连接器的试验过程
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004); English version EN ISO 21329:2004
|
| DIN EN ISO 2160-1999
| 石油产品.对铜的腐蚀作用.铜片试验
| Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998); German version EN ISO 2160:1998
|
| DIN EN ISO 23251-2007
| 石油、石化和天然气工业.压力释放和降压系统
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2006); English version EN ISO 23251:2007
|
| DIN EN ISO 2592-2002
| 石油产品.闪点和燃点测定.克利弗兰(Cleveland)开杯法
| Petroleum products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000); German version EN ISO 2592:2002
|
| DIN EN ISO 3104-1999
| 石油产品.透明和不透石油明液体.运动粘度的测定和动力粘度的计算
| Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994 + Cor. 1:1997); German version EN ISO 3104:1996 + AC:1999
|
| DIN EN ISO 3170 Berichtigung 1-2007
| 石油液体.人工取样
| Petroleum liquids - Manual sampling (ISO 3170:2004); German version EN ISO 3170:2004, Corrigenda to DIN EN ISO 3170:2004-06
|
| DIN EN ISO 3170-2004
| 石油液体.人工采样
| Petroleum liquids - Manual sampling (ISO 3170:2004); German version EN ISO 3170:2004
|
| DIN EN ISO 3171-2000
| 石油液体.自动管线采样
| Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988); German version EN ISO 3171:1999
|
| DIN EN ISO 3405-2001
| 石油产品.在大气压下测定蒸馏特性
| Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000); German version EN ISO 3405:2000
|
| DIN EN ISO 3675-1999
| 原油和液体石油产品.密度实验室测定.密度计法
| Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998); German version EN ISO 3675:1998
|
| DIN EN ISO 3830-1995
| 石油产品.汽油中铅含量的测定.一氯化碘法 (ISO 3830:1993); 德文版本 EN ISO 3830:1995
| Petroleum products - Determination of lead content of gasoline - Iodine monochlorid method (ISO 3830:1993); German version EN ISO 3830:1995
|
| DIN EN ISO 3838-2004
| 原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞比重瓶和带刻度双毛细管比重瓶法
| Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004); German version EN ISO 3838:2004
|
| DIN EN ISO 3977-5-2003
| 燃气轮机.采购.第5部分:石油和天然气工业用燃气轮机
| Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003
|
| DIN EN ISO 3993-1995
| 液化石油气和轻质烃类.密度或相对密度的测定.压力液体比重测定法 (ISO 3993:1984); 德文版本 EN ISO 3993:1
| Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995
|
| DIN EN ISO 4256-1999
| 液化石油气.蒸汽压力测定.液化石油气法
| Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996); German version EN ISO 4256:1998
|
| DIN EN ISO 4257-2002
| 液化石油气体.取样方法(ISO 4257:2001); 德文版本 EN ISO 4257:2001
| Liquefied petroleum gases - Method of sampling (ISO 4257:2001); German version EN ISO 4257:2001
|
| DIN EN ISO 4259 Berichtigung 1-2007
| 石油产品.与试验方法相关的精密数据的测定和应用
| Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006); German version EN ISO 4259:2006, Corrigenda to DIN EN ISO 4259:2006-10
|
| DIN EN ISO 4259-2006
| 石油产品.试验方法精度数据的确定和应用(ISO 4259-2006)
| Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006); English version of DIN EN ISO 4259:2006-10
|
| DIN EN ISO 4263-1-2005
| 石油及相关产品.抗氧化油和液体老化性的测定.TOST试验.第1部分:矿物油测定规程
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils (ISO 4263-1:2003); German version EN ISO 4263-1:2004
|
| DIN EN ISO 4263-2-2003
| 石油及相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第2部分:HFC类液压液测定规程
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for class HFC hydraulic fluids (ISO 4263-2:2003); German version EN ISO 4263-2:2003
|
| DIN EN ISO 4263-3-2006
| 石油和相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第3部分:合成水压的无水程序(ISO 4263-3:2006)
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2006); English version of DIN EN ISO 4263-3:2006-05
|
| DIN EN ISO 4263-4-2006
| 石油和相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第4部分:工业齿轮油的程序(ISO 4263-4:2006)
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006); English version of DIN EN ISO 4263-4:2006-05
|
| DIN EN ISO 4264-2007
| 石油产品.用四变量方程计算中间馏份燃料的十六烷指数
| Petroleum products - Calculation of cetane index of middle-distillate fuels by four-variable equation (ISO 4264:2007); German version EN ISO 4264:2007
|
| DIN EN ISO 4267-2-1996
| 石油和液体石油制品.油量计算.第2部分:动态测量
| Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement (ISO 4267-2:1988); German version EN ISO 4267-2:1995
|
| DIN EN ISO 4404-1-2006
| 石油和相关产品.难燃液压液的抗腐蚀性测定.第2部分:含水油液(ISO 4404-1:2001)
| Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2001); English version of DIN EN ISO 4404-1:2006-11
|
| DIN EN ISO 4404-2-2003
| 石油和相关产品.难燃液压液抗腐蚀性的测定.第2部分:不含水液体
| Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003); German version EN ISO 4404-2:2003
|
| DIN EN ISO 5163-2006
| 石油产品.发动机和航空燃料的爆震特性测定.马达法
| Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2005); German version EN ISO 5163:2005
|
| DIN EN ISO 5164-2006
| 石油产品.发动机燃料爆震特性的测定.研究法
| Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2005); German version EN ISO 5164:2005
|
| DIN EN ISO 5165-1999
| 石油产品.柴油燃料点火质量的测定.十六烷发动机试验法
| Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:1998); German version EN ISO 5165:1998
|
| DIN EN ISO 6245-2003
| 石油制品.灰分的测定 (ISO 6245:2001); 德文版本 EN ISO 6245:2002
| Petroleum products - Determination of ash (ISO 6245:2001); German version EN ISO 6245:2002
|
| DIN EN ISO 6246-1998
| 石油产品.易挥发和中等蒸馏燃料的蒸发残渣.顶吹法
| Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995); German version EN ISO 6246:1996
|
| DIN EN ISO 6251-1998
| 液化石油气.对铜的腐蚀性.铜片试验
| Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996); German version EN ISO 6251:1998
|
| DIN EN ISO 6551-1996
| 石油液体和气体.动态测量的准确性和安全性.电脉冲数据和/或电子脉冲数据的电缆传输
| Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982); German version EN ISO 6551:1995
|
| DIN EN ISO 6551-1996
| 石油液体和气体.动态测量的准确性和安全性.电脉冲数据和/或电子脉冲数据的电缆传输
| Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982); German version EN ISO 6551:1995
|
| DIN EN ISO 7536-1996
| 石油产品.汽油耐氧化性测定.诱导期法
| Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994); German version EN ISO 7536:1996
|
| DIN EN ISO 8222-2003
| 石油测量系统.校准.容积验证箱校准温度修正
| Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002); German version EN ISO 8222:2002
|
| DIN EN ISO 8754-2003
| 石油产品.硫含量的测定.能量分散X射线荧光光谱法
| Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003); German version EN ISO 8754:2003
|
| DIN EN ISO 8819-1995
| 液化石油气.硫化氢的测定.醋酸铅法 (ISO 8819:1993); 德文版本 EN ISO 8819:1995
| Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993); German version EN ISO 8819:1995
|
| DIN EN ISO 8973-2000
| 液化石油气.密度和蒸气压力的计算
| Liquefied petroleum gases - Calculation for density and vapour pressure (ISO 8973:1997); German version EN ISO 8973:1999
|
| DIN ISO 11009-2007
| 石油产品和润滑剂.润滑脂水冲特性的测定
| Petroleum products and lubricants - Determination of water washout characteristics of lubricating greases (ISO 11009:2000)
|
| DIN ISO 15597-2006
| 石油和相关产品.氯和溴成分的测定.波长色散X射线荧光光谱法
| Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 15597:2001)
|
| DIN ISO 2049-2001
| 石油产品.颜色的测定(ASTM 刻度)
| Petroleum products - Determination of colour (ASTM scale) (ISO 2049:1996)
|
| DIN ISO 2137-1997
| 石油产品.润滑脂和矿脂.锥入度测定
| Petroleum products - Lubricating grease and petrolatum Determination of cone penetration (ISO 2137:1985)
|
| DIN ISO 2176-1997
| 石油产品.润滑脂.滴点测定
| Petroleum products - Lubricating grease - Determination of dropping point (ISO 2176:1995)
|
| DIN ISO 2908-1983
| 石油蜡.油含量的测定
| Petroleum waxes; determination of oil content
|
| DIN ISO 2909-2004
| 石油产品.用运动粘度计算粘度指数
| Petroleum products - Calculation of viscosity index from kinematic viscosity (ISO 2909:2002)
|
| DIN ISO 2977-2000
| 石油产品和烃类溶剂.苯胺点和混合苯胺的点测定
| Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point (ISO 2977:1997)
|
| DIN ISO 3013-1998
| 石油产品.航空燃料的凝固点的测定
| Petroleum products - Determination of freezing point of aviation fuels (ISO 3013:1997)
|
| DIN ISO 3014-1997
| 石油制品.煤油发烟点测定
| Petroleum products - Determination of the smoke point of kerosine
|
| DIN ISO 3016-1982
| 石油.倾点的测定
| Petroleum oils; determination of pour point
|
| DIN ISO 3733-2003
| 石油制品和沥青材料.水含量的测定.蒸馏法 (ISO 3733:1999)
| Petroleum products and bituminous materials - Determination of water - Distillation method (ISO 3733:1999)
|
| DIN ISO 3771-1985
| 石油产品.碱总值的测定.高氯酸电位滴定法
| Petroleum products; total base number; perchloric acid potentiometric titration method
|
| DIN ISO 3841-1983
| 石油蜡.熔点(冷却曲线)测定
| Petroleum waxes; determination of melting point (cooling curve)
|
| DIN ISO 4926-1979
| 道路车辆.液压制动系统.非石油基基准液
| Road Vehicles; Hydraulic Brake Systems, Non-petroleum Base Reference Fluids
|
| DIN ISO 5275-2005
| 石油产品和烃类溶剂.硫醇类和其他硫类的测定.检硫液法
| Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test (ISO 5275:2003)
|
| DIN ISO 6614-2002
| 石油产品.石油和合成流体的脱水性能测定 (ISO 6614:1994)
| Petroleum products - Determination of water separability of petroleum oils and synthetic fluids (ISO 6614:1994)
|
| DIN ISO 7120 Berichtigung 1-2007
| 石油产品和润滑剂.石油润滑油和其他液体.在含水情况下防锈特性的测定.DIN ISO 7120-2000技术勘误
| Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the resence of water (ISO 7120:1987), Corrigenda to DIN ISO 7120:2000-05
|
| DIN ISO 7120-2000
| 石油产品和润滑剂.石油润滑油和其他液体.在含水情况下防锈性能的测定
| Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the presence of water (ISO 7120:1987)
|
| DIN ISO 7632-1986
| 道路车辆.使用石油基液压制动液的液压盘式制动液压缸的弹性密封垫件(最大工作温度120℃)
| Road vehicles; elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 °C max.); identical with ISO 7632, edition 1985
|
| DIN ISO 8216-0-1991
| 石油产品.燃料(F级).分类.总则
| Petroleum products; fuel (class F); classification; general; identical with ISO 8216-0:1986
|
| DIN ISO 8216-1-1991
| 石油产品.燃料(F类).分类.第1部分:船用燃料种类
| Petroleum products; fuels (class F); classification; categories of marine fuels; identical with ISO 8216-1:1986
|
| DIN ISO 8217-1993
| 石油产品.燃料(F 类).船舶用燃料规范; 等同采用 ISO 8217:1987
| Petroleum products; fuels (class F); specifications of marine fuels; identical with ISO 8217:1987
|
| DIN ISO 91-1-1984
| 石油测量表.第1部分:根据参比温度为15℃和60°F 的编制表
| Petroleum measurement tables; part 1: tables based on reference temperatures of 15 °C and 60 °F
|
| DIN ISO 9120-2005
| 石油及相关产品.汽轮机油和其他油的空气释放性能的测定.冲击滤尘器法
| Petroleum and related products - Determination of air-release properties of steam turbine and other oils - Impinger method (ISO 9120:1997)
|
| DIN-Fachbericht CEN/TR 15138-2005
| 石油制品和其他液体.闪点检测指南
| Petroleum products and other liquids - Guide to flash point testing; German version CEN/TR 15138:2005
|
| DIN-Fachbericht CEN/TR 15367-1-2007
| 石油产品.优质家务管理指南.第1部分:机动车柴油机燃料
| Petroleum products - Guide for good housekeeping - Part 1: Automotive diesel fuels; German version CEN/TR 15367-1:2007
|
| DIN-Fachbericht CEN/TR 15367-2-2007
| 石油产品.优质家务管理指南.第2部分:机动车汽油燃料
| Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels; German version CEN/TR 15367-2:2007
|
| DIN-Fachbericht CEN/TR 15522-1-2007
| 溢油鉴别.水上石油和石油产品.第1部分:取样
| Oil spill identification - Waterborne petroleum and petroleum products - Part 1: Sampling; German version CEN/TR 15522-1:2006
|
| 编号 | 中文名称 | 英文名称 |
|---|