| 编号 | 中文名称 | 英文名称 |
|---|
| CR 13839-2000
| 石油产品 核磁共振（NMR）光谱测定法测定芳香性
| Petroleum products - Determination of aromaticity <(hoch)13>C nuclear magnetic resonance (NMR) spectrometric method
|
| CR 13840-2000
| 石油产品 多环芳香烃的测定 紫外线光谱法
| Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method
|
| CR 221-1984
| 石油产品用有轨汽车 快速反应半离合器
| Rails cars for petroleum products. Quick-action half coupling
|
| EN 1089-1-1996
| 可运输气瓶 储气瓶的识别（不包括液化石油气） 第1部分：加印
| Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 1: Stampmarking
|
| EN 1089-2-2002
| 可运输气瓶 储气瓶的识别（不包括液化石油气） 第2部分：预防性标签
| Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 2: Precautionary labels
|
| EN 12177-1998
| 液化石油产品 无铅气油 用气相色谱法测定苯含量
| Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography
|
| EN 12252-2000
| 液化石油气（LPG）公路罐车的装备
| Equipping of Liquefied Petroleum Gas (LPG) road tankers
|
| EN 12493-2001
| 液化石油气（ＬＰＧ）用焊接钢罐 油槽车设计和制造
| Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture
|
| EN 12542-2002
| 地上的容积不大于13m3 立方米贮存液化石油气（ＬＰＧ）用静止的焊接圆形钢罐 设计和制造
| Static welded steel cylindrical tanks, serially produced for the storage of Liquified Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> and for installation above ground - Design and manufacture
|
| EN 12569-1999+AC-2000
| 工业阀门 化工和石油化学工业用阀门 要求和试验
| Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
|
| EN 12634-1998
| 石油产品和润滑剂 酸值测定 无水电势滴定法
| Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method
|
| EN 12662-1998
| 液化石油产品 中间馏份中污染的测定
| Liquid petroleum products - Determination of contamination in middle distillates
|
| EN 12766-1-2000
| 石油制品和废油 PCBs和相关产品的测定 第1部分：用电子俘获探测器（ECD）通过气相色谱分析（GC）法分离和
| Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
|
| EN 12766-2-2001
| 石油制品和废油 PCBs和相关产品的测定 第2部分：多氯化联二苯（PCB）含量计算
| Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content
|
| EN 12805-2002
| 机动车液化石油气（LPG）构件 容器
| Automotive LPG components - Containers
|
| EN 12806-2003
| 机动车液化石油气（LPG）构件 罐以外的其它容器
| Automative liquefied petroleum gas components - Other than containers
|
| EN 12807-2001
| 可移动再充式液化石油气（LPG）铜焊钢瓶 设计和构造
| Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
|
| EN 12816-2001
| 可移动再充式液化石油气（LPG）钢瓶和铝瓶 处理
| Transportable refillable steel and aluminium LPG cylinders - Disposal
|
| EN 12817-2002
| 容积最大可达13m3（包括13m3）的地上液化石油气（LPG）罐的检验和重新鉴定
| Inspection and requalification of LPG tanks up to and including 13 m<(hoch)3> overground
|
| EN 12818-2002
| 容积最大可达13m3的地上液化石油气（LPG）罐的检验和重新鉴定
| Inspection and requalification of LPG tanks up to and including 13 m<(hoch)3> underground
|
| EN 12819-2002
| 容积大于13m3的地上液化石油气（LPG）罐的检验和重新鉴定
| Inspection and requalification of LPG tanks greater than 13 m<(hoch)3> overground
|
| EN 12820-2002
| 容积大于13m3的地下液化石油气（LPG）罐的检验和重新鉴定
| Inspection and requalification of LPG tanks greater than 13 m<(hoch)3> underground
|
| EN 12916-2000
| 石油制品 中间馏份中芳香烃类的测定 带折射率测定的高效液相色谱法
| Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
|
| EN 12979-2002
| 机动车液化石油气LPG 系统 安装要求
| Automotive LPG-systems - Installation requirements
|
| EN 13016-1-2000
| 液体石油制品 蒸汽压 第1部分：空气饱和蒸汽压（ASVP）的测定
| Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP)
|
| EN 13016-2-2000
| 液体石油制品 蒸汽压 第2部分：从40℃到100℃之间的绝对蒸汽压（AVP）测定
| Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute vapour pressure (AVP) between 40 Degrees C and 100 Degrees C
|
| EN 13075-1-2002
| 石油制品 沥青和沥青粘合剂 断裂性能测定 第1部分：阳离子沥青乳液断裂值的测定 矿物填充法
| Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bitumen emulsions, mineral filler method
|
| EN 13075-2-2002
| 石油制品 沥青和沥青粘合剂 断裂性能测定 第2部分：阳离子沥青乳液细粒混合时间的测定
| Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bitumen emulsions
|
| EN 13109-2002
| 液化石油气（LPG）罐 处理
| LPG tanks - Disposal
|
| EN 13110-2002
| 可移动再充式焊接液化石油气铝瓶 设计和构造
| Transportable refillable welded aluminium cylinders for liquefied petroleum gas - Design and construction
|
| EN 13131-2000
| 液体石油制品 镍和钒含量测定 原子吸收分光谱法
| Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method
|
| EN 13132-2000
| 液体石油制品 无铅汽油 用柱转换法通过气相色谱测定有机氧化物和总有机束缚氧的含量
| Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
|
| EN 13152-2001+A1-2003
| 液化石油气瓶阀规范和测试 自动关闭阀
| Specification and testing of LPG cylinder valves - Self closing
|
| EN 13153-2001+A1-2003
| 液化石油气瓶阀规范和测试 手工操作阀
| Specification and testing of LPG cylinder valves - Manually operated
|
| EN 13175-2003
| 液化石油气（LPG）管阀门和装配的规范和试验
| Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings
|
| EN 13645-2001
| 液化石油气装置和设备 贮存容量在5t到200t之间的陆上装置的设计
| Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t
|
| EN 13723-2002
| 石油制品 汽油中低含铅量的测定 波长-色散的X射线荧光光谱测定法（XRF）
| Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
|
| EN 13760-2003
| 轻型和重型机动车辆用液化石油气填充系统 喷油嘴试验要求和尺寸
| Automative LPG filing system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
|
| EN 13776-2002
| 液化石油气（LPG）公路罐车的灌充和排放程序
| Filling and discharge procedures for LPG road tankers
|
| EN 13799-2002
| 液化石油气（LPG）罐液位计
| Contents gauges for LPG tanks
|
| EN 13856-2002
| 关于汽车液化石油气（LPG）系统用户操作指南内容的最低要求
| Minimum requirements for the content of the user manual for automotive LPG systems
|
| EN 13942-2003
| 石油和天然气工业 管道运输系统 管道阀门
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999, modified)
|
| EN 13952-2003
| 液化石油气（LPG）罐 充气程序
| LPG cylinders - Filling procedures
|
| EN 13953-2003
| 液化石油气（LPG）用可运输、可再装油缸卸压阀
| Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
|
| EN 14075-2002
| 系列生产的液化石油气（LPG）储存量不大于13立方米的安装在地下的固定式焊接钢圆罐 设计和制造
| Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> and for installation underground - Design and manufacture
|
| EN 14140-2003
| 可运输的可重复充装的焊接液化石油气钢瓶 （LPG） 设计和结构的选择
| Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction
|
| EN 14163-2001
| 石油和天然气工业 管道运输系统 管道的焊接
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified)
|
| EN 1439-1996
| 液化石油气(LPG)用可运输可再充填的焊接钢瓶 充气前 充气时和充气后的检验程序
| Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Procedure for checking before, during and after filling
|
| EN 1440-1996+AC-1999
| 液化石油气(LPG)用可运输可再充填的焊接钢 周期重复鉴定
| Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic requalification / Note: To be replaced by prEN 1440 (2003-09).
|
| EN 1442-1998+A1-2002+AC-1999
| 液化石油气(LPG)用可运输可再充填焊接钢气瓶 设计和生产
| Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction
|
| EN 1596-1998
| 专用液化石油器规范 移动式和便携式非家强制对流直燃式空气加热器
| Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters
|
| EN 1596/prA1-2003
| 专用液化石油器规范 移动式和便携式非家用强制对流直燃式空气加热器 修改A1
| Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters; Amendment A1 / Note: Intended as an amendment to EN 1596 (1998-06).
|
| EN 1601-1997
| 液体石油产品 无铅汽油 通过气相色谱法对有机氧化复合物和总有机结合氧含量的测定
| Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
|
| EN 1762-1997
| 气压为25bar(2.5MPa)及以下的液化石油气LPG(液相或气相)及天然气用橡胶软管和软管组件 规范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
|
| EN 1919-2000
| 可运输气瓶 液化气瓶(已炔气和液化石油气除外) 灌充时的检验
| Transportable gas cylinders - Cylinders for liquefied gases (excluding acetylene and LPG) - Inspection at time of filling
|
| EN 23015-1994
| 石油产品 浊点测定
| Petroleum products; determination of cloud point (ISO 3015:1992)
|
| EN 237-1996
| 液态石油产品 汽油 原子吸收光谱法测定低铅浓度
| Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
|
| EN 238-1996
| 液态石油产品 汽油 红外光谱法测定苯含量
| Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
|
| EN 241-2000
| 液态石油产品 钠含量的测定 原子吸收光谱法
| Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
|
| EN 24260-1994
| 石油产品和烃类 硫含量的测定 威克波耳德燃烧法
| Petroleum products and hydrocarbons; determination of sulfur content; Wickbold combustion method (ISO 4260:1987)
|
| EN 417-2003
| 用于便携式灶具的、带或不带阀门的液化石油气用一次性金属气筒 制作、检验、测试和标志
| Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
|
| EN 449-2002
| 专用液化石油气器具规范 家用无烟道空间加热器（包括普及型催化燃烧加热器）
| Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters)
|
| EN 461-1999
| 专用液化石油气器具规范 不超过10kKW的无烟道非家用空间加热器
| Specifications for dedicated liquefied petroleum gas appliances - Flueless non-domestic space heaters not exceeding 10 kW
|
| EN 461/prA1-2003
| 专用液化石油气器具规范 不超过10KW的无烟道非家用空间加热器 修改A1
| Specifications for dedicated liquefied petroleum gas appliances - Flueless non-domestic space heaters not exceeding 10 kW; Amendment A1 / Note: Intended as an amendment to EN 461 (1999-09).
|
| EN 484-1997
| 专用液化石油气器具规范 包括室外用配套烤架的独立烤盘
| Specification for dedicated liquefied petroleum gas appliances - Independent hotplates, including those incorporating a grill for outdoor use
|
| EN 497-1997
| 专用液化石油气器具规范 室外用多用途蒸煮炉
| Specification for dedicated liquefied petroleum gas appliances - Multi purpose boiling burners for outdoor use
|
| EN 498-1997
| 专用液化石油气器具规范 室外用烤肉架
| Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use
|
| EN 521-1998
| 专用液化石油气器具规范 便携式气压液化石油气器具
| Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances
|
| EN 57-1984
| 石油产品 闪点测定 Abel-Pensky封闭检测仪
| Petroleum products; Determination of flash point; Abel-Pensky closed tester
|
| EN 589-2000
| 汽车燃料 LPG（液化石油气） 要求和试验方法
| Automotive fuels - LPG - Requirements and test methods
|
| EN 61221-1995
| 石油产品和润滑剂 三方基磷酸酯涡轮机控制液 规范
| Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (categorie ISO-L-TCD) - Specifications (IEC 61221:1993)
|
| EN 624-2000
| 专用LPG（液化石油气）器具规范 车、船上安装的室内密封LPG空间加热设备
| Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
|
| EN 732-1998
| 专用于液化石油气器具的规范 吸收式制冷器
| Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators
|
| EN 976-1-1997
| 玻璃增强塑料地下贮罐 非压力存储液体石油燃料水平园柱状水箱 第1部分：单壁水箱试验方法和要求
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks
|
| EN 976-2-1997
| 玻璃增强塑料地下贮罐 非压力存储液体石油燃料水平园柱状贮罐 第2部分：单壁贮罐的运输、储存、操作和安
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks
|
| EN ISO 10239-2000
| 小艇 液化石油气(LPG)系统
| Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2000)
|
| EN ISO 10370-1995
| 石油产品 残碳的测定 数量法
| Petroleum products - Determination of carbon residue - Micro method (ISO 10370:1993)
|
| EN ISO 10423-2001
| 石油和天然气工业 钻井及开采设备 井口及圣诞树形设备
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2001)
|
| EN ISO 10426-1-2000+A1-2002
| 石油和天然气工业 油井固井用水泥和材料 第1部分：规范
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2000)
|
| EN ISO 10427-1-2001
| 石油和天然气工业 套管找中器 第1部分：弓簧套管找中器
| Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001)
|
| EN ISO 10432-1999
| 石油和天然气工业 下降孔设备 地下安全阀设备
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:1999)
|
| EN ISO 10437-2003
| 石油，石油化工和天然气工业 汽轮机 特殊用途设备
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003)
|
| EN ISO 10439-2002
| 石油，石油化工和天然气工业 离心压缩机
| Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002)
|
| EN ISO 10440-1-2000
| 石油和天然气工业 旋转型容积式压缩机 第1部分：加工压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive displacement compressors - Part 1: Process compressors (oil-free) (ISO 10440-1:2000)
|
| EN ISO 10440-2-2001
| 石油和天然气工业 旋转型容积式压缩机 第2部分：整装空气压缩机(无油)
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
|
| EN ISO 10441-1999
| 石油和天然气工业 机械动力传输用挠性接箍 特殊应用
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - Special purpose applications (ISO 10441:1999)
|
| EN ISO 10442-2002
| 石油，石油化工和天然气工业 整装齿轮离心空气压缩机
| Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002)
|
| EN ISO 11960-2001+AC-2002
| 石油和天然气工业 油井套管和油管用钢管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001)
|
| EN ISO 11961-1996
| 石油和天然气工业 钻井杆用钢管 规范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996)
|
| EN ISO 12185-1996
| 原油和石油产品 密度的测定 振动的U形管法
| Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
|
| EN ISO 12205-1996
| 石油产品 中间馏分燃料的氧化安定性的测定
| Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995)
|
| EN ISO 12937-2000
| 石油产品 水分的测定 库仑卡尔·费休滴定法
| Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000)
|
| EN ISO 13500-1998
| 石油和天然气工业 钻井液体材料 规范和测试
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:1998)
|
| EN ISO 13533-2001
| 石油和天然气工业 钻井和生产设备 钻孔设备
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001)
|
| EN ISO 13534-2000
| 石油和天然气工业 钻井和生产设备 提升设备的检查、维护、修理和再制造
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000)
|
| EN ISO 13535-2000
| 石油和天然气工业 钻井和生产设备 提升设备
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000)
|
| EN ISO 13625-2002
| 石油和天然气工业 钻探和开采设备 海洋钻机提升机联结器
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002)
|
| EN ISO 13628-1-1999
| 石油和天然气工业 水下采油系统的设计和操作 第1部分：一般要求和建议
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:1999)
|
| EN ISO 13628-2-2000
| 石油和天然气工业 水下采油系统的设计和操作 第2部分：海底和海洋设备用软管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000)
|
| EN ISO 13628-3-2000
| 石油和天然气工业 水下采油系统的设计和操作 第3部分：通流线系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000)
|
| EN ISO 13628-4-1999
| 石油和天然气工业 水下采油系统的设计和操作 第4部分：井口和采油树设备
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999)
|
| EN ISO 13631-2002
| 石油和天然气工业 整装往复式气体压缩机
| Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
|
| EN ISO 13680-2001
| 石油和天然气工业 用作套管、油管和接箍的防腐合金无缝钢管交货技术条件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000)
|
| EN ISO 13691-2002
| 石油和天然气工业 特殊用途高速齿轮装置
| Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001)
|
| EN ISO 13702-1999
| 石油和天然气工业 对海上开发安装中着火和爆炸的控制和减弱要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999)
|
| EN ISO 13703-2000
| 石油和天然气工业 海上开采平台上管道系统的设计和安装
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000)
|
| EN ISO 13705-2001
| 石油和天然气工业 一般炼油厂的烧火的加热器
| Petroleum and natural gas industries - Fired heaters for general refinery service (ISO 13705:2001)
|
| EN ISO 13706-2000
| 石油和天然气工业 风冷热交换器
| Petroleum and natural gas industries - Air-cooled heat exchangers (ISO 13706:2000)
|
| EN ISO 13736-1997
| 石油产品和其他液体 闪点的测定 阿贝尔闭口杯法
| Petroleum products and other liquids - Determination of flash point - Abel closed cup method (ISO 13736:1997)
|
| EN ISO 13757-1996
| 液化石油气 油残余物的测定 高温法
| Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996)
|
| EN ISO 13758-1996
| 液化石油气 评价丙烷干燥度 阀冻结法
| Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996)
|
| EN ISO 13759-1996
| 石油产品 柴油中硝酸烷基酯含量的测定 分光光度法
| Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996)
|
| EN ISO 14310-2001
| 石油和天然气工业 井下设备 装填器和桥状砂堵
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001)
|
| EN ISO 14596-1998
| 石油产品 硫含量的测定 波长色散X-射线荧光光谱法
| Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:1998)
|
| EN ISO 14597-1999
| 石油产品 钒和镍含量的测定 波长色散X-射线荧光光谱法
| Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997)
|
| EN ISO 14691-2000
| 石油和天然气工业 机械动力传输挠性接箍 一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999)
|
| EN ISO 14692-1-2002
| 石油和天然气工业 玻璃纤维增强塑料管 第1部分：词汇、符号、设备和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002)
|
| EN ISO 14692-2-2002
| 石油和天然气工业 玻璃纤维增强塑料管 第2部分：资格和制造
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002)
|
| EN ISO 14692-3-2002
| 石油和天然气工业 玻璃纤维增强塑料管 第3部分：系统设计
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002)
|
| EN ISO 14692-4-2002
| 石油和天然气工业 玻璃纤维增强塑料管 第4部分：制造 、安装和运行
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002)
|
| EN ISO 14723-2001
| 石油和天然气工业 管道输送系统 海底管道阀
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001)
|
| EN ISO 14935-1998
| 石油和相关产品 难燃液芯带燃烧持久度的测定
| Petroleum and related products - Determination of wick flame persistance of fire-resistant fluids (ISO 14935:1998)
|
| EN ISO 15029-1-1999
| 石油和相关产品 难燃液体喷射燃烧特性的测定 第1部分：喷流燃烧持久度 空锥喷嘴法
| Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method (ISO 15029-1:1999)
|
| EN ISO 15136-1-2001
| 石油和天然气的井下设备 人工升降梯的空腔泵系统 第1部分：泵
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001)
|
| EN ISO 15138-2000
| 石油和天然气工业 海上开采装置 供暖 通风和空气调节
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2000)
|
| EN ISO 15156-1-2001
| 石油和天然气工业 在石油和天然气生产中用于硫化氢环境的材料 第1部分：耐裂材料选择的一般原则
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001)
|
| EN ISO 15546-2002
| 石油和天然气工业 铝合钻管
| Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002)
|
| EN ISO 15547-2001
| 石油和天然气工业 板式热交换器
| Petroleum and natural gas industries - Plate heat exchangers (ISO 15547:2000)
|
| EN ISO 15761-2002
| 石油及天然气工业用DN100及较小的钢闸阀 、球阀和防逆阀
| Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002)
|
| EN ISO 16070-2001
| 石油和天然气工业 井下设备 闭锁心轴和落地短接管
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2001)
|
| EN ISO 17776-2002
| 石油和天然气工业 海上生产装置 危险识别和风险评定用工具和技术的指南
| Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000)
|
| EN ISO 19900-2002
| 石油和天然气工业 海上结构的一般要求
| Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002)
|
| EN ISO 19901-4-2003
| 石油和天然气工业 海上结构的特殊要求 第4部分：土工技术和基础设计的考虑内容
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003)
|
| EN ISO 19901-5-2003
| 石油和天然气工业 海上结构的特殊要求 第5部分：设计和施工中的重量控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003)
|
| EN ISO 20823-2003
| 石油和石油产品 与热表面接触时流体的易燃特性的测定 多种形式的点燃试验
| Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surface (ISO 20823-2003)
|
| EN ISO 20843-2003
| 石油及石油产品 HFA(六氟丙酮)\HFAS和HFC流体中阻燃液PH值的测定
| Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2003)
|
| EN ISO 2160-1998
| 石油产品 对铜的腐蚀性 铜片腐蚀试验
| Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
|
| EN ISO 3104-1996
| 石油产品 透明和不透明石油液体 运动粘度的测定和动力粘度的计算
| Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
|
| EN ISO 3170-1998
| 石油液体 人工采样
| Petroleum liquids - Manual sampling (ISO 3170:1988, including Amendment 1:1998)
|
| EN ISO 3171-1999
| 石油液体 自动管线的采样
| Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
|
| EN ISO 3405-2000
| 石油产品 常压下馏份特性的测定
| Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000)
|
| EN ISO 3675-1998
| 原油和液体石油产品 密度实验室测定 密度计法
| Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
|
| EN ISO 3830-1995
| 石油产品 汽油中铅含量的测定 一氯化碘法
| Petroleum products - Determination of lead content of gasoline - Iodine monochloride method (ISO 3830:1993)
|
| EN ISO 3838-1995
| 原油和液体或固体石油产品 密度或相对密度的测定 毛细管塞比重瓶和带刻度双毛细管比重瓶法
| Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Cappilary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:1983)
|
| EN ISO 3977-5-2003
| 燃气轮机 采购 第5部分：石油与天然气工业的应用
| Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)
|
| EN ISO 3993-1995
| 液化石油气和轻质烃类 密度或相对密度的测定 压力比重计法
| Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984)
|
| EN ISO 4256-1998
| 液化石油气 量规蒸气压的测定 LPG法
| Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996)
|
| EN ISO 4257-2001
| 液化石油气 采样方法
| Liquefied petroleum gases - Method of sampling (ISO 4257:2001)
|
| EN ISO 4259-1995
| 石油产品 试验方法精度数据的确定和应用
| Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:1992/Cor 1:1993)
|
| EN ISO 4263-2-2003
| 石油和相关产品 抗氧化油及液体老化性能的测定 TOST试验 第2部分：HFC级液压液试验程序
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003)
|
| EN ISO 4264-1996
| 石油产品 用四变量方程式计算中间馏份燃料十六烷指数
| Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:1995)
|
| EN ISO 4267-2-1995
| 石油与液化石油产品 油量的计算 第２部分：动态计量
| Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement (ISO 4267-2:1988)
|
| EN ISO 4404-2-2003
| 石油与相关产品 阻燃液压油防腐蚀性的测定 第3部分：无水液体
| Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003)
|
| EN ISO 5165-1998
| 石油产品 柴油着火性能的测定 十六烷值法
| Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:1998)
|
| EN ISO 6245-2002
| 石油产品 灰分的测定
| Petroleum products - Determination of ash (ISO 6245:2001)
|
| EN ISO 6246-1997
| 石油产品 轻质和中间馏份燃料的含量 喷射蒸发法
| Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995)
|
| EN ISO 6251-1998
| 液化石油气 对铜的腐蚀 铜片测试
| Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996)
|
| EN ISO 6551-1995
| 石油液体和气体 动态测量的精度和可靠性 电脉冲数据和／或电子脉冲数据的电缆传输
| Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982)
|
| EN ISO 734-1-2000
| 油籽饼粕 含油量测定 第1部分：已烷(或石油醚)提取法
| Oilseed residues - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum) (ISO 734-1:1998)
|
| EN ISO 7536-1996
| 石油产品 汽油氧化安定性的测定 诱导期法
| Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994)
|
| EN ISO 8222-2002
| 石油测量系统 校正 用校准容积校准槽使用时的修正温度
| Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)
|
| EN ISO 8754-2003
| 石油产品 含硫量的测定 非扩散型X－射线荧光光谱法
| Petroleum products - Determination of sulfur content - Energy-dispersive-X-ray fluorescence spectrometry (ISO 8754:2003)
|
| EN ISO 8819-1995
| 液化石油气 硫化氢的测定 乙酸铅法
| Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993)
|
| EN ISO 8973-1999
| 液化石油气 密度和蒸气压的计算
| Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997)
|
| prEN 12766-3-2001
| 石油成制品和废油 PCBs和相关产品的测定 第3部分：使用电子俘获探测器通过气相色谱分析（GC）法测定和量
| Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture dectector(ECD)
|
| prEN 12917-1997
| 玻璃纤维加强塑料（GRP）制地下罐 用于液体石油燃料无压贮存的卧式柱罐 EN976-1和EN976-3的符合性评价
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Assessment of conformity to EN 976-1 and EN 976-3
|
| prEN 13616-1999
| 液化石油燃料固定罐防溢出装置
| Overfill prevention devices for static tanks for liquid petroleum fuels
|
| prEN 14071-2000
| 液化石油气（LPG）罐的减压阀 辅助设备
| Pressure relief valves for LPG tanks - Ancillary equipment
|
| prEN 14077-2003
| 石油产品 有机卤素含量的测定 氧化微库仑分析法
| Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method
|
| prEN 14078-2003
| 液化石油产品 中间馏份中脂肪酸甲基酯（FAME）的测定 红外光谱法
| Liquid petroleum products - Determination of fatty acid methyl esters (FAME) in middle distillates - Infrared spectroscopy method
|
| prEN 14129-2001
| 液化石油汽（LGP）罐压力调节阀
| Pressure relief valves for LPG tanks
|
| prEN 14161-2003
| 石油和天然气工业 管道运输系统
| Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified)
|
| prEN 14331-2003
| 液化石油产品用液相/气相色谱法对脂肪酸甲基酯进行分离和描述
| Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle destillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method
|
| prEN 14334-2003
| 液化石油气公路运输罐的检查和试验
| Inspection and testing of LPG road tankers
|
| prEN 14402-2002
| 可运输可重复充装的钎焊液化石油气（LPG）钢瓶 周期性重新检验
| Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Periodic requalification
|
| prEN 14422-2002
| 液化石油气软管用夹具型连接组件
| Clamp type coupling assemblies for LPG transfer hoses
|
| prEN 14427-2002
| 可运输可重复充装液化石油气用全缠绕复合瓶 设计和结构
| Transportable refillable fully wrapped composite cylinders for liquefied petroleum gases - Design and construction
|
| prEN 1762-2003
| 气压为25bar(2.5MPa)液化石油气LPG(液相或气相)及天然气用橡胶软管和软管组件 规范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification / Note: Intended as replacement for EN 1762 (1997-10).
|
| prEN 237-2001
| 液态石油产品 汽油 原子吸收光谱法测定低铅浓度
| Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
|
| prEN 976-3-1997
| 玻璃增强塑料地下贮罐 非压力存储液体石油燃料水平园柱状贮罐 第3部分：双壁贮罐的要求和试验方法
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 3: Requirements and test methods for double wall tanks
|
| prEN 976-4-1997
| 玻璃增强塑料地下贮罐 非压力存储液体石油燃料水平园柱状贮罐 第4部分：双壁贮罐的运输、储存、操作和安
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 4: Transport, handling, storage and installation of double wall tanks
|
| prEN ISO 10434-2002
| 石油和天然气工业用螺栓帽状钢闸阀
| Bolted bonnet steel gate valves for petroleum and natural gas industries (ISO/DIS 10434:2002)
|
| prEN ISO 13707-2000
| 石油和天然气工业 往复式压缩机
| Petroleum and natural gas industries - Reciprocating compressors (ISO/FDIS 13707:2000)
|
| prEN ISO 15156-3-2003
| 石油和天然气工业 在石油和天然气生产中用于硫化氢环境的材料 第3部分：耐裂合金(CRAs)(耐蚀合金)和其他
| Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO/FDIS 15156-3:2003)
|
| prEN ISO 17292-2002
| 石油、石油化工及相关工业用金属球阀
| Metal ball valves for petroleum, petrochemical and allied industries (ISO/DIS 17292:2002) / Note: Endorsement notice
|
| prEN ISO 20623-2003
| 石油和石油产品 液态石油产品的耐板压特性和抗磨特性的测定 四球法(欧洲条件)
| Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO/FDIS 20623:2003)
|
| prEN ISO 20764-2003
| 石油和石油产品 测定水含量用高沸点液体试验样品的制备 氮清除法
| Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO/FDIS 20764:2003)
|
| prEN ISO 20783-1-2003
| 石油及石油产品 阻燃液乳化稳定性的测定 第1部分：HFAE类流体
| Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO/FDIS 20783-1:2003)
|
| prEN ISO 20783-2-2003
| 石油及石油产品 阻燃液乳化稳定性的测定 第2部分：HFB类流体
| Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO/FDIS 20783-2:2003)
|
| prEN ISO 20844-2002
| 石油及石油产品 用柴油机喷嘴测定含聚合物油类的剪切稳定性
| Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO/DIS 20844:2002)
|
| prEN ISO 20846-2002
| 石油及石油产品 液态石油产品总硫量的测定 紫外线荧光法
| Petroleum products - Determination of total sulfur content of liquid petroleum products - Ultraviolet fluorescence method (ISO/DIS 20846:2002) / Note: Endorsement notice
|
| prEN ISO 20847-2002
| 石油产品 机动车燃料含硫量的测定 能量分散X射线荧光光谱法
| Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO/DIS 20847:2002) / Note: Endorsement notice
|
| prEN ISO 20884-2002
| 石油产品 机动车燃料含硫量的测定 波长分散X射线荧光光谱法
| Petroleum products - Determination of low sulfur content of automotive fuels - Wavelenght-dispersive X-ray fluorescence spectrometry (ISO/DIS 20884:2002) / Note: Endorsement notice
|
| prEN ISO 3170-2002
| 石油液体 人工采样
| Petroleum liquids - Manual sampling (ISO/DIS 3170:2002)
|
| prEN ISO 3838-2002
| 原油和液体或固体石油产品 密度或相对密度的测定 毛细管塞比重瓶和带刻度双毛细管比重瓶法
| Crude petroleum and liquid or solid petroleum products - Determination of desity or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO/DIS 3838:2002)
|
| 编号 | 中文名称 | 英文名称 |
|---|