欧洲机械安全标准(EN machine safety standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 IEC　|　 ISO　|　 JIS　|　 NF　|　 DIC
编号中文名称英文名称
CR 954-100-1999 机械安全 控制系统安全相关部件 第100部分： EN 954-1:1996使用和应用指南 Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996
EN 1005-1-2001 机械安全 人体物理性能 第1部分：术语和定义 Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN 1005-2-2003 机械安全 人体物理性能 第2部分：机械处理和机械元件手册 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
EN 1005-3-2002 机械安全 人体物理性能 第3部分：机械操作用推荐力限值 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
EN 1010-3-2002 机械安全 印刷和纸张转换机的设计和结构的安全要求 第3部分：切割机 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
EN 1023-2-2000 办公家具 屏风 第2部分：机械安全要求 Office furniture - Screens - Part 2: Mechanical safety requirements
EN 1034-1-2000 机械安全 造纸机械和精整机的设计和建造安全要求 第1部分：通用要求 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
EN 1034-3-1999 机械安全 造纸机械和精整机的设计和建造安全要求 第3部分：卷纸机、纵切机和绞合机 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines
EN 1037-1995 机械安全 避免意外起动 Safety of machinery - Prevention of unexpected start-up
EN 1050-1996 机械安全 危害评估原则 Safety of machinery - Principles for risk assessment
EN 1070-1998 机械安全 术语 Safety of machinery - Terminology
EN 1088-1995 机械安全 和保护装置相连的锁紧装置 设计和选择的原则 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
EN 1093-1-1998 机械安全 空气中有害物质排放的评估 第1部分：试验方法的选择 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
EN 1093-11-2001 机械安全 空气中有害物质排放的评估 第11部分：静化指数 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
EN 1093-3-1996 机械安全 空气中有害物质排放的评估 第3部分：特定污染的排放率 实际污染物的分组试验方法 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Emission rate of a specified pollutant - Bench test method using the real pollutant
EN 1093-4-1996 机械安全 空气中有害物质排放的评估 第4部分：排气系统的俘获效率 示踪法 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
EN 1093-6-1998 机械安全 空气中有害物质排放的评估 第6部分：通过未经管道流出的质量来评价分离离效率 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
EN 1093-7-1998 机械安全 空气中有害物质排放的评估 第7部分：通过经管道流出的质量来评价分离离效率 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
EN 1093-8-1998 机械安全 空气中有害物质排放的评估 第8部分：分组法测定污染物的浓度参数 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method
EN 1093-9-1998 机械安全 空气中有害物质排放的评估 第9部分：室内法测定污染物的浓度参数 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
EN 12198-1-2000 机械安全　机械发射的辐射产生的危险的评定和减少　第1部分：一般原则 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
EN 12198-2-2002 机械安全　机械发射的辐射产生的危险的评定和减少　第2部分：辐射剂量的测量程序 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure
EN 12198-3-2002 机械安全　机械发射的辐射产生的危险的评定和减少　第3部分：用衰变或屏蔽减少辐射 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
EN 12626-1997 机械安全　激光加工机械　安全要求 Safety of machinery - Laser processing machines - Safety requirements (ISO 11553:1996 modified)
EN 12786-1999 机械安全性 安全标准振动条款起草指南 Safety of machinery - Guidance for the drafting of the vibration clauses of safety standards
EN 13478-2001 机械安全性 防火和保护 Safety of machinery - Fire prevention and protection
EN 13861-2002 机械安全性 机械设计中对人机工程学标准的采用指南 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
EN 1746-1998 机械安全 安全标准的噪声条款编写指南 Safety of machinery - Guidance for the drafting of the noise clauses of safety standards
EN 1760-1-1997 机械安全 压敏防护装置 第1部分：压敏垫和压敏地板的设计和试验的一般原则 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
EN 1760-2-2001 机械安全 压敏防护装置 第2部分：压敏边缘和压敏棒设计和试验的一般原则 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN 292-1-1991 机械安全 设计用的基本概念、一般原则 第1部分：基本术语、方法论 Safety of machinery; basic concepts, general principles for design; part 1: basic terminology, methodology
EN 292-2-1991+A1-1995 机械安全 设计用的基本概念、一般原则 第2部分：技术原则和规范 Safety of machinery; basic concepts, general principles for design; part 2: technical principles and specifications
EN 294-1992 机械安全 避免上肢可到达危险区域的安全距离 Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
EN 294-1992 机械安全 避免上肢可到达危险区域的安全距离 Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
EN 349-1993 机械安全 避免挤压人体各部分的最小间隙 Safety of machinery; Minimum gaps to avoid crushing of parts of the human body
EN 414-2000 机械安全 安全标准的起草和报批规则 Safety of machinery - Rules for the drafting and presentation of safety standards
EN 415-1-2000 包装机械安全 第1部分：包装机械及相关设备的术语和分类 Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment
EN 415-2-1999 包装机械安全 第2部分：预成型刚性容器包装机械 Packaging machines safety - Part 2: Pre-formed rigid container packaging machines
EN 415-3-1999 包装机械安全 第3部分：成型、填充和密封机械 Safety of packaging machines - Part 3: Form, fill and seal machines
EN 415-4-1997+AC-2002 包装机械安全 第4部分：货盘装载器和货盘卸载器 Safety of packaging machines - Part 4: Palletisers and depalletisers
EN 418-1992 机械安全 功能方面的紧急停止设备 设计原则 Safety of machinery; Emergency stop equipment, functional aspects; Principles for design
EN 457-1992 机械安全 听觉危险信号 一般要求、设计和测试（ISO 7731-1986，修改） Safety of machinery; Auditory danger signals; General requirements, design and testing (ISO 7731:1986, modified)
EN 50144-1-1998+A1-2002+A2-2003 手持电动工具的安全 　第1部分：一般要求 Safety of hand-held electric motor operated tools - Part 1: General requirements
EN 50144-2-13-2002 手持电动工具的安全性　第2-13部分：链锯的特殊要求 Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws
EN 50144-2-15-2001 手持电动工具的安全性　第2-15部分：树篱修整机的特殊要求 Safety of hand-held electric motor operated tools - Part 2-15: Particular requirements for hedge trimmers
EN 50144-2-3-2002 手持电动工具的安全性　第2-3部分：研磨机、圆盘磨光机和抛光机的特殊要求 Safety of hand-held electric motor operated tools - Part 2-3: Particular requirements for grinders, disk type sanders and polishers
EN 50144-2-7-2000 手持电动工具的安全　第2-7部分：喷枪的特殊要求 Safety of hand-held electric motor operated tools - Part 2-7: Particular requirements for spray guns
EN 527-2-2002 办公家具 工作台和办公桌 第2部分：机械安全要求 Office furniture - Work tables and desks - Part 2: Mechanical safety requirements
EN 547-1-1996 机械安全 人体测量 第1部分：确定整个人体进入机械设备通道所需尺寸的原则 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN 547-2-1996 机械安全 人体测量 第2部分：确定进入通道所需尺寸的原则 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
EN 547-3-1996 机械安全 人体测量 第3部分：人体测量数据 Safety of machinery - Human body measurements - Part 3: Anthropometric data
EN 563-1994+A1-1999+AC-2000 机械安全 可触摸表面的温度 确定热表面温度极限值的工效学数据 Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces
EN 574-1996 机械安全 双柄控制设备 功能状况 设计原则 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
EN 581-3-1999 户外家具 野营、家用和订做的座椅和桌子 第3部分：桌子的机械安全要求和试验方法 Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables
EN 60204-1-1997 机械安全　机械的电气设备　第1部分：一般要求　 Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:1997)
EN 60204-1/prA1-1998 机械安全　机械的电气设备　第1部分：一般要求　修改prA1 Amendment 1 to IEC 60204-1: Addition of Annex F (informative)
EN 60204-1/prAA Alternative A-1999 机械安全　机械的电气设备　第1部分：一般要求　修改prAA A Safety of machinery - Electrical equipment of machines - Part 1: General requirements; Amendment AA
EN 60204-1/prAA Alternative B-1999 机械安全　机械的电气设备　第1部分：一般要求　修改prAA B Safety of machinery - Electrical equipment of machines - Part 1: General requirements; Amendment AA
EN 60204-1/prAA-1998 机械安全　机械的电气设备　第1部分：一般要求　修改prAA Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 61029-1-2000+A11-2003+A12-2003 移动式电动工具的安全　第1部分：一般要求 Safety of transportable motor-operated electric tools - Part 1: General requirements (IEC 61029-1:1990, modified)
EN 61029-2-1-2002 移动式电动工具的安全　第2－1部分：圆锯的特殊要求 Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993 + A1:1999 + A2:2001, modified)
EN 61029-2-4-2003+A1-2003 移动式电动工具的安全　第２－４部分：台式沙轮机的特殊要求 Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993, modified)
EN 61029-2-5-2002 移动式电动工具的安全　第2-5部分：带状锯的特殊要求 Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993 + A1:2001, modified)
EN 61029-2-9-2002 移动式电动工具的安全　第2-9部分：斜切锯的特殊要求　 Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995, modified)
EN 61310-1-1995 机械安全　指示、标记和驱动　第1部分：可视、可听和可触觉信号要求 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:1995)
EN 61310-2-1995 机械安全　指示、标记和驱动　第2部分：标记要求 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking (IEC 61310-2:1995)
EN 61310-3-1999 机械安全 指示、标记和驱动　第3部分：驱动器的位置和操作要求 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators (IEC 61310-3:1999)
EN 614-1-1995 机械安全 人类工程学设计原则 第1部分：术语和一般原则 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN 614-2-2000 机械安全 人类工程学设计原则 第2部分：机械设计和工作任务间的相互作用 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
EN 61496-1-1997 机械安全　电敏保护设备　第1部分：一般要求和试验 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests (IEC 61496-1:1997) / Note: Includes Corrigendum to french version of September 2001
EN 61496-3-2001 机械安全　电敏保护设备　第3部分：易引起漫反射的有源光电子保护器件设备的特殊要求 Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) (IEC 61496-3:2001)
EN 61965-2001 阴极射线管的机械安全 Mechanical safety of cathode ray tubes (IEC 61965:2000) / Note: Endorsement notice
EN 626-1-1994 机械安全 减少机械产生的危险物质对健康造成的危害 第1部分：机械制造原则和规范 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
EN 626-2-1996 机械安全 减少机械产生的危险物质对健康造成的危害 第2部分：检验程序的指导方法 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
EN 786-1996 花园设备 电动步行手扶剪草机和草地修边机 机械安全 Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety
EN 811-1996 机械安全 防止被下肢碰撞的危险区安全距离 Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs
EN 811-1996 机械安全 防止被下肢碰撞的危险区安全距离 Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs
EN 842-1996 机械安全 可视危险信号 一般要求、设计和测试 Safety of machinery - Visual danger signals - General requirements, design and testing
EN 859-1997 木工机械安全 人工加料表面刨床 Safety of woodworking machines - Handfed surface planing machines
EN 860-1997 木工机械安全 单面厚度刨床 Safety of woodworking machines - One side thickness planing machines
EN 861-1997 木工机械安全 表面刨平和厚度机械 Safety of woodworking machines - Surface planing and thicknessing machines
EN 894-1-1997 机械安全 显示器和控制致动器设计的人类工程学要求 第1部分：人与显示器和控制致动器相互作用的一般原则 Safety of machinery - Ergonomic requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
EN 894-2-1997 机械安全 显示器和控制致动器设计的人类工程学要求 第2部分：显示器 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
EN 894-3-2000 机械安全 显示器和控制致动器设计的人类工程学要求 第3部分：控制致动器 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 953-1997 机械安全 防护装置 固定和移动防护装置构造和设计的一般要求 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 954-1-1996 机械安全 控制系统部件的安全 第1部分：设计的一般原则 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
EN 981-1996 机械安全 危险信号的视听系统 Safety of machinery - System of auditory and visual danger and information signals
EN 983-1996 机械安全 流体动力系统及其元件的安全要求 气压装置 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 999-1998 机械安全 有关与人体部分接近速度的保护设备的位置 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
EN ISO 13849-2-2003 机械安全 控制系统有关安全部件 第2部分：振动　 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003)
EN ISO 14738-2002 机械安全　机械工作站设计的人体测量要求 Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002)
ENV 581-2-2000 户外家具 野营、家用和订做的座椅和桌子 第2部分：样品的机械安全要求和试验方法 Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for sampling
prEN 1005-4-2002 机械安全 人体物理性能 第4部分：与机械有关的工作状态和移动评估 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
prEN 12044-1998 鞋类、皮革及仿皮革制品制造机械　切割及冲压机械安全要求 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
prEN 12937-1997 机械安全性 可动和升降机械的技术原理和指标 Safety of machinery - Technical principles and specifications for mobility and for lifting
prEN 13451-9-1998 泳池设备 第9部分：安全标志 Swimming pool equipment - Part 9: Safety signs
prEN 13675-1999 机械安全性 轧管和滚轧机及线材加工设备的安全要求 Safety of machinery - Safety requirements for tube forming and rolling mills and finishing line equipment
prEN 14010-2003 机械安全　机械化汽车停车场设备　设计　制造　安装和经营阶段的电磁兼容性（EMC）要求和安全 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
prEN 14386-2002 机械安全 移动机械可操作性的人类工效学设计原则 Safety of machinery - Ergonomic design principles for the operability of mobile machinery
prEN 1743-2-1994 家具 家用、承包和野营用户外餐桌 第2部分：机械安全要求和试验 Furniture - Outdoor tables for domestic, contract and camping use - Part 2: Mechanical safety requirements and test methods
prEN 2349-601-2000 航空航天系列 继电器和接触器要求和试验程序 第601部分：周围安全距离 Aerospace series - Requirements and test procedures for relays and contactors - Part 601: Compass safety distance
prEN 60745-2-12-2002 手持式电动工具的安全　第２－１２部分：混凝土震动器的特殊要求　草案 IEC 60745-2-12, Ed. 2: Safety of hand-held motor-operated electric tools - Part 2-12: Particular requirements for concrete vibrators
prEN 60745-2-18-2003 手持式电动工具的安全　第２－１８部分：打包工具的特殊要求　草案 Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools (IEC 60745-2-18:2003, modified)
prEN 60745-2-19-2002 手持式电动工具的安全　第２－１９部分：长刨的特殊要求　草案 Safety of hand-held motor-operated electric tools - Part 2-19: Particular requirements for jointers
prEN 60745-2-21-2001 手持式电动工具的安全　第２－２１部分：排水沟清理机的特殊要求　草案 IEC 60745-2-21, Ed. 1.0: Safety of hand-held motor-operated electric tools - Part 2-21: Particular requirements for drain cleaners
prEN 61029-2-11-2001 移动式电动工具的安全　第２－１１部分：４５度角斜面接口椅的特殊要求 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws (IEC 61029-2-11:2001, modified)
prEN 61029-2-2-1997 移动式电动工具的安全　第２－２部分：旋臂锯的特殊要求 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for radial arm saws (IEC 61029-2-2:1993, modified)
prEN 61029-2-3-1997 移动式电动工具的安全　第２－３部分：刨和刨板机的特殊要求 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers (IEC 61029-2-3:1993, modified)
prEN 61029-2-6-1992 移动式电动工具的安全　第２－６部分：注水金刚石钻的特殊要求 Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply
prEN 61029-2-7-1992 移动式电动工具的安全　第２－７部分：注水金刚石锯的特殊要求 Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply
prEN 61029-2-8-2002 移动式电动工具的安全　第２－８部分：单芯轴垂直模压机的特殊要求 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995 + A1:1999 + A2:2001, modified)
prEN 61472-2003 带电作业　最小安全距离　计算方法 IEC 61472, Ed. 2.0: Live working - Minimum approach distances for A.C. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
prEN 61496-1-2003 机械安全　电敏保护设备　第1部分：一般要求和试验 IEC 61496-1: Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
prEN 61965-2003 阴级射线管的机械安全 IEC 61965, Ed. 2: Mechanical safety of cathode ray tubes
prEN 954-2-1999 机械安全 控制系统部件的安全 第2部分：确认 Safety of machinery - Safety-related parts of control systems - Part 2: Validation
prEN ISO 11553-1-2002 机械安全　激光加工机械　安全要求 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO/DIS 11553-1:2002) / Note: Intended as replacement for EN 12626 (1997-02).
prEN ISO 12100-1-2003 机械安全 设计用的基本概念、一般原则 第1部分：基本术语、方法论 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO/FDIS 12100-1:2003)
prEN ISO 12100-2-2003 机械安全 设计用的基本概念、一般原则 第2部分：技术原则 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO/FDIS 12100-2:2003)
prEN ISO 4126-4-2003 保护额外压力的安全设备　第4部分：飞行员操作安全阀 Safety devices for the protection against excessive pressure - Part 4: Pilot operated safety valves (ISO/FDIS 4126-4:2003)
编号中文名称英文名称
返回