| 编号 | 中文名称 | 英文名称 |
|---|
| NF A91-701-1999
| 表面处理.工厂水箱,管道和设备的识别.安全标志
| (Surface treatment. Identification of workshop tanks, piping and equipment. Safety marking.)
|
| NF C75-300-1996
| 手持电动工具的安全.第1部分:一般要求
| (SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 144-1).)
|
| NF C75-305-1997
| 手提式电动工具的安全.第2-5部分:圆盘锯和圆盘刀
| (Safety of hand-held electric motor operated tools. Part 2-5 : particular requirements for circular saws and circular knives.)
|
| NF C79-133-2001
| 机械安全.机器的电气设备.第11部分:电压超过1000V.a.c.或1500V.d.c和36KV以下的HV设备的要求
| (Safety of machinery - Electrical equipment of machines - Part 11 : requirements for HV equipement for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV.)
|
| NF C95-230-2002
| 阴极射线管的机械安全
| (Mechanical safety of cathode ray tubes.)
|
| NF D61-061-3-1999
| 室外家具.野营,家用和定约用座位和桌子.第3部分:机械安全要求和桌子的试验方法
| (OUTDOOR FURNITURE. SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE. PART 3 : MECHANICAL SAFETY REQUIREMENTS AND TEST METHODS FOR TABLES. (EUROPEAN STANDARD EN 581-3).)
|
| NF D62-043-2-2000
| 办公家具.遮板.第2部分:机械安全要求
| (Office furniture - Screens - Part 2 : mechanical safety requirements.)
|
| NF E09-010-1992
| 机械安全.防止上肢触及机器设备危险区的安全距离
| (Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs.)
|
| NF E09-011-1993
| 机械安全.避免人身体部分被挤压的最小间隙.(欧洲标准EN 349)
| (SAFETY OF MACHINERY. MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY. (EUROPEAN STANDARD EN 349).)
|
| NF E09-012-1996
| 机械的安全.第012部分:防止下肢接触危险区域的安全距离
| (SAFETY OF MACHINERY. SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS. (EUROPEAN STANDARD EN 811).)
|
| NF E09-025-1997
| 机械安全.控制系统零部件安全.第1部分:设计的一般原理(欧洲标准EN 954-1)
| (SAFETY OF MACHINERY. SAFETY RELATED PARTS OF CONTROL SYSTEMS. PART 1 : GENERAL PRINCIPLES FOR DESIGN. (EUROPEAN STANDARD EN 954-1).)
|
| NF E09-037-1997
| 机械安全.双手控制设备.功能.设计原理(欧洲标准EN 574)
| (SAFETY OF MACHINERY. TWO-HAND CONTROL DEVICES. FUNCTIONAL ASPECTS. PRINCIPLES FOR DESIGN. (EUROPEAN STANDARD EN 574).)
|
| NF E09-041-2001
| 机械安全.压敏防护装置.第2部分:压敏垫和压敏棒的设计和试验通用规则
| (Safety of machinery - Pressure sensitive protective devices - Part 2 : general principles for the design and testing of pressure sensing edges and pressure sensitive bars.)
|
| NF E09-070-2000
| 机械安全.对由机器辐射产生的风险的评估和降低.第1部分:总则
| (Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1 : general principles.)
|
| NF E09-071-2003
| 机械安全.机械辐射风险的评定和降低.第2部分:辐射发射测量规则
| (Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2 : radiation emission measurement procedure.)
|
| NF E09-072-2003
| 机械安全.机械辐射风险的评定和降低.第3部分:通过衰减或屏蔽降低辐射
| (Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3 : reduction of radiation by attenuation or screening.)
|
| NF E09-081-11-2001
| 机械安全.空气中有害物质排放的评估.第11部分:净化指数
| (Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11 : decontamination index.)
|
| NF E09-081-4-1996
| 机械安全.空气有害物质排放评估.第4部分:排气系统俘获系数.示踪方法
| (Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 4 : capture efficiency of an exhaust system. Tracer method.)
|
| NF E48-202-1996
| 机械安全.液力系统和部件的安全要求.液压装置(欧洲标准EN 982)
| (SAFETY OF MACHINERY. SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS. HYDRAULICS. (EUROPEAN STANDARD EN 982).)
|
| NF E49-202-1996
| 机械安全.液力系统和部件的安全要求.气压装置(欧洲标准EN 983)
| (Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics.)
|
| NF E58-014-1998
| 土方机械.安全标志和危险图示.一般规则
| (EARTH-MOVING MACHINERY. SAFETY SIGNS AND HAZARD PICTORIALS. GENERAL PRINCIPLES.)
|
| NF E85-001-2001
| 机械安全.允许接近机器的固定方式.第1部分:两种水平之间固定接近方式的选择
| (Safety of machinery - Permanent means of access to machinery - Part 1 : choice of a fixed means of access between two levels.)
|
| NF E85-002-2001
| 机械安全.允许接近机器的固定方式.第2部分:工作平台和通路
| (Safety of machinery - Permanent means of access to machinery - Part 2 : working platforms and walkways.)
|
| NF E85-003-2001
| 机械安全.允许接近机器的固定方式.第3部分:楼梯、梯凳和护栏
| (Safety of machinery - Permanent means of access to machinery - Part 3 : stairs, stepladders and guard-rails.)
|
| NF E90-407-2001
| 机械安全.安全标准振动条款的起草指南
| (Safety of machinery - Guidance for the drafting of the vibration clauses of safety standards.)
|
| NF Q40-002-3-2000
| 机械安全.纸生产和修整机械设计和制造的安全要求.第3部分:卷纸机、切纸机和折纸机
| (Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3 : winders and slitters, plying machines.)
|
| NF Q79-003-3-2003
| 机械安全.印刷和卷纸机的设计和结构安全要求.第3部分:切纸机
| (Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3 : cutting machines.)
|
| NF S30-200-1999
| 机械安全.安全标准的噪音条款的起草指南
| (Safety of machinery. Guidance for the drafting of the noise clauses of safety standards.)
|
| NF S60-304-1988
| 防火.安全标志
| (Fire protection. Safety signs.)
|
| NF T81-008-1974
| 液态化学产品的运输和装卸:内河航行罐船.运输过程中的安全要求.压缩空气机械操作安全设备
| (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS:TANKERS FOR INTERIOR NAVIGATION:SAFETY REQUIREMENTS DURING TRANSFER OPERATIONS - MECHANICALLY OPERATED SAFETY DEVICE BY COMPRESSED AIR.)
|
| NF T81-107-2003
| 运输与装卸.道路罐车.操作人员的安全.入口与操作安全
| (Transport and handling - Road tankers - Operators safety - Acces and handling securities.)
|
| NF X35-005-2003
| 机械安全.机械设计中人类工效学应用指南
| (Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery.)
|
| NF X35-101-1-1997
| 机械安全.显示和控制调节器设计的人类工效学要求.第1部分:人与显示和控制调节器相互作用的一般原则(欧洲标
| (SAFETY OF MACHINERY. ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS. PART 1 : GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS. (EUROPEAN STANDARD EN 894-1).)
|
| NF X35-101-2-1997
| 机械安全.显示和控制调节器设计的人类工效学要求.第2部分:显示
| (Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 2 : displays.)
|
| 编号 | 中文名称 | 英文名称 |
|---|