| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI C37.85-2002 | 电力开关用交流高压电力真空断路器的X射线辐射极限 | Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum |
| ANSI Z21.22a-1999 | 减压阀和真空截止阀 | Pressure Relief Valves and Vacuum Relief Valves |
| ANSI/ASME A112.19.17-2002 | 住宅区和商业区游泳池、健康中心、热浴盆和浅水池水抽吸系统的人造安全真空排放系统 | Manufactured Safety Vacuum Release Systems for Residential and Commercial Swimming Pool, Spas, Hot Tub and Wading Pool Suction Systems |
| ANSI/ASME A112.3.1-2007 | 地上和地下卫生排水、排污及放气(DWV)、雨水和真空设备用不锈钢排水系统 | Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above and Below-Ground |
| ANSI/ASSE 1001-2001 | 应用管道的大气式真空制动器 | Pipe-Applied Atmospheric-Type Vacuum Breakers |
| ANSI/ASSE 1011-2004 | 软管连接真空轧碎机 | Hose Connection Vacuum Breakers |
| ANSI/ASSE 1019-2004 | 防冻自动排水型真空开关墙壁消防栓性能要求 | Performance Requirements for Vacuum Breaker Wall Hydrant, Freeze Resistant Automatic Draining Type |
| ANSI/ASSE 1020-2004 | 压力真空断路器组件 | Pressure Vacuum Breakers Assembly |
| ANSI/ASSE 1056-2002 | 倒虹吸回流真空关闭阀 | Back Siphonage Backflow Vacuum Breakers |
| ANSI/ASTM A469-1994 | 用于发电机转子的真空处理钢锻件规范 | Specification for Vacuum-Treated Steel Forgings for Generator Rotors |
| ANSI/ASTM A768-1996 | 涡轮机转子及轴用经真空处理的12/T%铬合金钢锻件规范 | Specification for Vacuum-Treated 12/T% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ANSI/ASTM A940-1996 | 涡轮转子用差温热处理真空处理钢锻件、合金规范 | Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
| ANSI/ASTM D2715-1992 | 真空中润滑剂挥发率的试验方法 | Test Method for Volatilization Rates of Lubricants in Vacuum |
| ANSI/ASTM D5188-2004 | 测定燃料汽-液比温度的试验方法(真空室法) | Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels Evacuated Chamber Method |
| ANSI/ASTM D5236-2003 | 重烃类混合物的蒸馏试验方法(真空蒸馏锅法) | Test Method for Distillation of Heavy Hydrocarbon Mixtures Vacuum Potstill Method |
| ANSI/ASTM D727-1996 | 真空法测定屋顶油毡和铺地毡煤油值的试验方法 | Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method |
| ANSI/ASTM F1038-1999 | 不带驱动搅拌装置的罐式手持通用真空吸尘器发动机寿命评定的试验方法 | Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator |
| ANSI/ASTM F1284-1999 | 评价住宅中央控制真空吸尘器吸除地毯脏物效力的试验方法 | Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ANSI/ASTM F1326-1996 | 普通真空吸尘器最大干燥空间测量方法 | Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ANSI/ASTM F1334-1996 | 真空吸尘器噪声能量等级测定方法 | Test Method for Determining Sound Power Level of Vacuum Cleaners |
| ANSI/ASTM F1410-1999 | 测量通用真空吸尘器的最大功能性湿容量的试验方法 | Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners |
| ANSI/ASTM F1411-2001 | 真空吸尘器用户须知信息惯例 | Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use |
| ANSI/ASTM F1601-2001 | 中央真空吸尘系统家用电动管嘴马达寿命评估试验方法 | Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle for Central Vacuum Cleaning System |
| ANSI/ASTM F1692-2001 | 家庭中央真空吸尘系统涡轮动力喷嘴寿命评估试验方法 | Test Method for Life Evaluation of aTurbine Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ANSI/ASTM F1977-2004 | 测定真空吸尘器系统初始部分过滤效率的试验方法 | Test Method for Determining Initial Fractional Filtration Efficiency of a Vacuum Cleaner System |
| ANSI/ASTM F2105-2001 | 测定真空除尘器马达/风扇系统空气特性的试验方法 | Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems |
| ANSI/ASTM F2222-2002 | 医用抽吸设备.真空或压力源驱动的抽吸设备 | Medical Suction Equipment-suction Equipment Powered from a Vacuum or Pressure Source |
| ANSI/ASTM F2608-2007 | 作为真空清洁处理工艺结果测定房间空气微粒数改变的试验方法 | Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process |
| ANSI/ASTM F2609-2006 | 真空吸尘器的垃圾清洁处理效果的标准试验方法 | Standard Test Method For litter-cleaning Effectiveness of Vacuum Cleaners |
| ANSI/ASTM F395-1999 | 真空吸尘器术语 | Terminology Relating to Vacuum Cleaners |
| ANSI/ASTM F420-1999 | 真空吸尘器可伸入家具底部深度的测试方法 | Test Method for Access Depth under Furniture of Vacuum Cleaners |
| ANSI/ASTM F430-1996 | 真空吸尘器过滤袋用纸试验方法 | Test Methods for Paper Used for Vacuum Cleaner Filter Bags |
| ANSI/ASTM F431-1999 | 真空吸尘器充气室空气动力性能测量规范 | Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners |
| ANSI/ASTM F450-2001 | 真空吸尘器软管耐热性及可靠性试验方法(塑料线增强) | Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (Plastic Wire Reinforced) |
| ANSI/ASTM F486-2001 | 真空吸尘器使用说明书编写惯例 | Practice for Preparation of Use and Care Booklets for Vacuum Cleaners |
| ANSI/ASTM F494-1993 | 评价真空吸尘器用一次性袋完整性的试验方法 | Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners |
| ANSI/ASTM F555-2006 | 立式真空吸尘器电动机寿命评定的标准试验方法 | Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ANSI/ASTM F595-2001 | 真空吸尘器软管耐用性及可靠性试验方法(全塑软管) | Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (All-Plastic Hose) |
| ANSI/ASTM F608-2006 | 评估地毯的实验室试验方法.家用真空吸尘器去除地毯灰尘的有效性 | Laboratory Test Method for Evaluation of Carpet-Embedded Dirt Removal Effectiveness of Household Vacuum Cleaners |
| ANSI/ASTM F655-1996 | 真空吸尘器试验用地毯和缓冲垫规范 | Specification for Test Carpets and Pads for Vacuum Cleaner Testing |
| ANSI/ASTM F820-1999 | 中央真空吸尘系统空气性能特征试验方法 | Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems |
| ANSI/ASTM F884-2001 | 中央真空吸尘器马达寿命评估试验方法 | Test Method for Motor Life Evaluation of a Central Vacuum Cleaner |
| ANSI/ASTM F888-1999 | 真空吸尘器主灰尘收集器最大功能容积测量方法 | Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner |
| ANSI/AWWA C512-2004 | 给水装置用放气阀、空气/真空和混合空气阀 | Air Release, Air/Vacuum, and Combination Air Valves for Water Works Service |
| ANSI/UL 1017-2006 | 真空吸尘器、吹风式吸尘器和家用地板抛光机的标准（推荐日期11-18-05） | Standard for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines (proposals dated 11-18-05) |
| ASME A112.19.17-2002 | 住宅和商用游泳池、健康中心、热浴盆和浅水池吸入系统用人造安全真空排放系统 | (Manufactured safety vacuum release systems (SVRS) for residential and commercial swimming pools, spa, hot tub, and wading pool suction systems) |
| ASME PTC 9 Erratum-1972 | 容积式压缩机,真空泵和鼓风机.正误表 | (Displacement compressors, vacuum pumps, and blowers; Erratum) |
| ASME PTC 9-1970 | 容积式压缩机,真空泵和鼓风机 | (Displacement compressors, vacuum pumps, and blowers) |
| ASTM A 469/A 469M-2007 | 发电机转子用真空处理钢锻件的标准规范 | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors |
| ASTM A 470/A 470M-2005 | 涡轮转子和轴用经真空处理的碳素钢和合金钢锻件的标准规范 | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 471-2006 | 涡轮转子盘和叶轮用真空处理合金钢锻件的标准规范 | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels |
| ASTM A 508/A 508Mb-2005 | 压力容器用经淬火和回火真空处理的碳素钢与合金钢锻件的标准规范 | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels |
| ASTM A 768/A 768M-2005 | 涡轮机转子及轴用经真空处理的含铬12%的合金钢锻件的标准规范 | Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 940/A 940M-2006 | 差温热处理真空处理钢锻件、合金钢锻件的标准规范 | Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
| ASTM ANS/ISO 10079-3-1999 | 医疗吸引设备.第3部分:与美国国家标准有偏差的ASTM国际标准认可的真空或用压力驱动吸引设备 | Medical Suction Equipment - Part 3: Suction Equipment Powered from a Vacuum or Pressure Source Approved as an American National Standard with Deviations by ASTM International |
| ASTM B 699-1986 | 钢铁表面镉真空沉积镀层标准规范 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM C 1119-1990 | 石棉水泥混合料真空排放的标准试验方法 | Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
| ASTM C 1214-2002 | 负压(真空)试验法测定混凝土管下水道的标准试验方法 | Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method |
| ASTM C 1214M-2002 | 负压(真空)试验法测定混凝土管下水道的标准试验方法(米制) | Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method [Metric] |
| ASTM C 1244a-2005 | 回填之前利用负压(真空)试验的混凝土污水管检查孔的标准试验方法 | Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill |
| ASTM C 1244Ma-2005 | 预回填负压(真空)试验法测定混凝土下水道人孔的标准试验方法(米制) | Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric] |
| ASTM C 1484-2007 | 真空绝缘板的标准规范 | Standard Specification for Vacuum Insulation Panels |
| ASTM C 1618-2005 | 使用负气压(真空)或正气压的混凝土排污管的标准试验方法 | Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure |
| ASTM C 1618M-2005 | 使用负气压(真空)和正气压的混凝土排污管的标准试验方法(米制) | Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure [Metric] |
| ASTM C 1667-2007 | 用热流仪表器具测量真空板条中心点耐热性的标准试验方法 | Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels |
| ASTM C 740-1997 | 低温作业中真空反射隔热标准实施规程 | Standard Practice for Evacuated Reflective Insulation In Cryogenic Service |
| ASTM C 745-1992 | 用有防护的平板蒸发量热计测定通过真空绝热材料热通量的试验方法 | Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter |
| ASTM C 830-2000 | 用真空压力法测定成型耐火材料表观空隙率、吸水性、表观比重和体密度的标准试验方法 | Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure |
| ASTM D 2171-2001 | 用真空毛细管粘度计测定沥青粘度的标准试验方法 | Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer |
| ASTM D 2715-1992 | 真空中润滑剂挥发速率的标准试验方法 | Standard Test Method for Volatilization Rates of Lubricants in Vacuum |
| ASTM D 3272-1976 | 从溶剂稀释涂料中真空蒸馏出分析用溶剂的方法 | Vacuum Distillation of Solvents from Solvent-Reducible Paints for Analysis |
| ASTM D 3908-2003 | 容量真空法测定氧化铝催化剂和催化剂载体上的铂的氢化学吸附性的标准试验方法 | Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method |
| ASTM D 4991-2007 | 用真空法进行空瓶罐泄漏试验的标准试验方法 | Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method |
| ASTM D 5188a-2004 | 燃料的汽-液比温度测定的标准试验方法(真空室法) | Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method) |
| ASTM D 5236-2003 | 重型烃类混合物蒸馏的标准试验方法(真空罐式蒸馏法) | Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) |
| ASTM D 5511-2002 | 在强溶解液真空降解条件下测定塑性材料的真空生物降解的标准试验方法 | Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
| ASTM D 5641-1994 | 真空室评定地工薄膜接缝的标准规范 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 5755-2003 | 用石棉结构值表面负荷用透射电子显微镜对尘埃微真空取样和间接分析的标准试验方法 | Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading |
| ASTM D 5756-2002 | 用透射电子显微镜对尘埃中石棉质量浓度作微真空取样和间接分析的标准试验方法 | Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration |
| ASTM D 6136-1997 | 用真空法对非饱和的(干的)毛毡的煤油数量测定的标准试验方法 | Standard Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method |
| ASTM D 622-1999 | 汽车空气制动和真空制动用橡胶软管的试验方法 | Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System |
| ASTM D 6336-1998 | 用真空改良的ε形叶片混合器评定车辆颜料湿度的实施规程 | Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer |
| ASTM D 6653-2001 | 真空法测定高空对包装系统影响的标准试验方法 | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
| ASTM D 6752-2003 | 用自动真空密封法测量压实的沥青混合料的毛体积比重和密度的标准试验方法 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 6857-2003 | 自动真空密封法测定沥青铺面混合料最大比重和密度的标准试验方法 | Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 7144a-2005 | 后成金属测定用高真空取样法进行表面灰尘收集的标准实施规程 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM D 7169-2005 | 用高温气相色谱法测定带有类似原油和大气以及真空残留物的样品的沸点分布的标准试验方法 | Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography |
| ASTM D 7227-2006 | 用真空干燥器对紧凑型沥青样本快速干燥的标准实施规程 | Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus |
| ASTM D 727-1996 | 真空方法测定屋顶和地板油毡煤油值的标准试验方法 | Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method |
| ASTM E 1009-1995 | 分析碳和低合金钢用光辐射真空分光仪的评估 | Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel |
| ASTM E 1086-1994 | 用点对面激发技术作不锈钢的光辐射真空光谱测定分析 | Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique |
| ASTM E 415a-1999 | 碳和低合金钢光辐射真空光谱测定分析的标准试验方法 | Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel |
| ASTM E 485-1994 | 采用点对面技术的高炉铁的光辐射真空光谱测定分析的标准试验方法 | Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique |
| ASTM E 595-2006 | 在真空环境中除气作用引起的总质量损失和收集到的挥发性可凝聚材料的标准试验方法 | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM E 834-2004 | 用冷凝管测定真空室气态环境的标准实施规程 | Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger |
| ASTM F 1038-2002 | 不带驱动搅拌装置的罐式手持通用真空吸尘器发动机寿命评定的试验方法 | Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator |
| ASTM F 1284-2004 | 测定住宅中心真空吸尘设备除去地毯深处灰尘效果的标准试验方法 | Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ASTM F 1326-2002 | 测量通用真空吸尘器的最大干燥空间的标准试验方法 | Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ASTM F 1334-2002 | 测定真空吸尘器A-加重声音功率级的标准试验方法 | Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
| ASTM F 1409-2000 | 清洁地毯时真空吸尘器直线移动的标准试验方法 | Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets |
| ASTM F 1410-1998 | 测量通用真空吸尘器最大功能湿容积的测试方法 | Standard Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners |
| ASTM F 1411-2001 | 为用户使用提供真空吸尘器现行精选信息的标准实施规程 | Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use |
| ASTM F 1594-1995 | 真空镀膜用纯铝(未掺杂质)原材料标准规范 | Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications |
| ASTM F 1601-2001 | 中央真空除尘系统用电动排气管的发动机寿命评估标准试验方法 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems |
| ASTM F 1692-2001 | 家用中央真空除尘系统用涡轮动力排气管寿命评定的标准试验方法 | Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ASTM F 19-1964 | 镀金属陶瓷密封件抗拉及真空试验方法 | Test Method for Tension and Vacuum Testing Metalized Ceramic Seals |
| ASTM F 1977-2004 | 测定真空吸尘器系统初始部分过滤效率的标准试验方法 | Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System |
| ASTM F 2105-2006 | 测量真空吸尘器发动机/风扇系统的空气性能特性的标准试验方法 | Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems |
| ASTM F 2158-2001 | 住宅中央真空管及配件的标准规范 | Standard Specification for Residential Central-Vacuum Tube and Fittings |
| ASTM F 2338-2007 | 用真空衰变法的包装紧密性无损检验的标准试验方法 | Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method |
| ASTM F 2387-2004 | 游泳池、水疗中心和热管用人造安全真空排放系统(SVRS)的标准规范 | Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs |
| ASTM F 2544-2006 | 测定中央火电厂真空系统A重量声级的标准试验方法 | Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units |
| ASTM F 2607-2006 | 测量家用/商用真空吸尘器的硬表面地板清洁能力的标准试验方法 | Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners |
| ASTM F 2608-2007 | 测定作为真空清洁处理结果的室内空气颗粒计数变化用标准试验方法 | Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process |
| ASTM F 2609-2007 | 真空吸尘器垃圾清理有效性的标准试验方法 | Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners |
| ASTM F 395-2003 | 真空吸尘器的相关标准术语 | Standard Terminology Relating to Vacuum Cleaners |
| ASTM F 420-2004 | 真空吸尘器可伸入家具底部深度的标准测试方法 | Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners |
| ASTM F 430-2005 | 真空吸尘器过滤袋用纸的标准试验方法 | Standard Test Methods for Paper Used for Vacuum Cleaner Filter Bags |
| ASTM F 431-2004 | 真空吸尘器充气室空气动力性能测量用标准规范 | Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners |
| ASTM F 450-2001 | 真空吸尘器软管的耐热性及可靠性的标准试验方法 | Standard Test Methods for Vacuum Cleaner Hose - Durability and Reliability (Plastic Wire Reinforced) |
| ASTM F 486-2001 | 真空吸尘器的使用和保养手册的编制的标准规程 | Standard Practice for Preparation of Use and Care Booklets for Vacuum Cleaners |
| ASTM F 494-2005 | 评价真空吸尘器原有一次性清洁袋完整性的标准试验方法 | Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners |
| ASTM F 555-2001 | 家用真空吸尘器的电动机寿命评定的标准试验方法 | Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ASTM F 558-2006 | 测定真空吸尘器的空气性能特征的标准测试方法 | Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners |
| ASTM F 595-2001 | 真空吸尘器软管的耐用性及可靠性试验(全塑软管)的标准试验方法 | Standard Test Methods for Vacuum Cleaner Hose - Durability and Reliability (All-Plastic Hose) |
| ASTM F 608-2003 | 家用/商用真空吸尘器去除地毯内藏污物的效果评定标准试验方法 | Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners |
| ASTM F 655-2006 | 真空吸尘器检验用试验地毯和衬垫的标准规范 | Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing |
| ASTM F 820-2006 | 测量中央真空吸尘系统的空气性能特征的测试方法 | Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems |
| ASTM F 884-2001 | 安装在内部的(集中式)真空吸尘器的电动机寿命评定的标准试验方法 | Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner |
| ASTM F 888-2006 | 测量真空吸尘器中主要灰尘收集器的最大功能容积的标准试验方法 | Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner |
| ASTM F 889-1984 | 用真空降低技术表征达到一定技术水平的平面综合特性的方法 | Test Method for Characterizing a Combination of Properties of Planar Surfaces to a Technical Level by a Vacuum Hold-Down Technique |
| ASTM/ISO 10079-3-1999 | 医疗抽吸设备.第3部分:真空或压力抽吸设备 | Medical Suction Equipment - Part 3: Suction Equipment Powered from a Vacuum or Pressure Source |
| IEEE C 62.32-1981 | 低压气隙电涌保护器件(不包括真空管和冲出式器件)的试验规范 | (Test specifications for low-voltage air gap surge-protective devices (excluding valve and expulsion type devices)) |
| UL 1017-2001 | 真空吸尘器、鼓风式清洁器和家用地板整理机 | (Vacuum cleaners, blower cleaners, and household floor finishing machines ) |
| UL 1450-2003 | 电动空气压缩机、真空泵和喷漆设备 | (Motor-operated air compressors, vacuum pumps, and painting equipment) |
| 编号 | 中文名称 | 英文名称 |