| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 2S 136-1977 | 含1%碳-铬钢(真空电弧再熔化的)方坯、棒材、锻件及零件规范.(限定等圆断面25mm) | Specification for 1% carbon-chromium steel (vacuum arc remelted) billets, bars, forgings and parts (limiting ruling section 25 mm) |
| BS 2S 146-1976 | 含4%镍-铬-钼空气冷淬硬钢(真空电弧重熔)方坯、棒材、锻件及零件规范(1760-1960MPa;限定等圆断面100mm) | Specification for 4% nickel-chromium-molybdenum air-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1760-1960 MPa: limiting ruling section 100 mm) |
| BS 3423-1986 | 实验室用玻璃真空器(包括干燥器)的设计推荐规范 | Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use |
| BS 3711-1964 | 铁路用滚圈式真空制动气缸规范 | Specification for railway vacuum brake cylinders, rolling ring type |
| BS 4479-9-1990 | 层覆物品设计.第9部分:低压和真空淀积覆层推荐标准 | Design of articles that are to be coated - Recommendations for low pressure and vacuum deposited coatings |
| BS 5415-2.2 Supplement No. 1-1986 | 电动工商业清洁设备的安全性.特殊要求.清除危害健康的灰尘用H型工业真空吸尘器的规范 | Safety of electrical motor-operated industrial and commercial cleaning appliances - Particular requirements - Specification for type H industrial vacuum cleaners for dusts hazardous to health |
| BS 5543-1978 | 真空技术-图形符号 | Vacuum technology - graphical symbols |
| BS 6134-1992 | 压力和真空开关规范 | Specification for pressure and vacuum switches |
| BS 6280-1982 | 用水装置真空试验方法(后虹吸作用) | Method of vacuum (backsiphonage) test for water-using appliances |
| BS 998-1990 | 食用真空盐规范 | Specification for vacuum salt for food use |
| BS DD ENV 737-6-2003 | 医用气体管道系统.压缩医用气体终端设备和真空终端设备用探针的尺寸和定位 | Medical gas pipeline systems - Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| BS EN 1012-1-1997 | 压缩机和真空泵.安全性要求.压缩机 | Compressors and vacuum pumps - Safety requirements - Compressors |
| BS EN 1012-2-1997 | 压缩机和真空泵.安全性要求.真空泵 | Compressors and vacuum pumps - Safety requirements - Vacuum pumps |
| BS EN 1091-1997 | 建筑物外真空排水系统 | Vacuum sewerage systems outside buildings |
| BS EN 1123-3-2004 | 污水系统用带插接套的纵向焊接热浸镀锌钢管及配件.真空排水系统以及造船用排水系统的尺寸和特殊要求 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
| BS EN 1124-4-2005 | 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.真空排水系统和船上排水系统用部件 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 4: Components for vacuum drainage systems and for drainage systems on ships |
| BS EN 12109-1999 | 建筑物内真空排水道系统 | Vacuum drainage systems inside buildings |
| BS EN 12294-2000 | 塑料管道系统.热水和冷水系统.真空渗漏性试验方法 | Plastic piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum |
| BS EN 1251-1-2000 | 低温容器.不超过1000升容积的可运输的真空隔热容器.基本要求 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Fundamental requirements |
| BS EN 1251-2-2000 | 低温容器.不超过1000升容积的可运输的真空隔热容器.设计、制造、检验和试验 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Design, fabrication, inspection and testing |
| BS EN 1251-3-2000 | 低温容器.不超过1000升容积的可运输的真空隔热容器.使用要求 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Operational requirements |
| BS EN 12546-1-2000 | 与食品接触的材料和器具.家用保温容器.真空器皿、保温瓶和保温壶规范 | Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for vacuum ware, insulated flasks and jugs |
| BS EN 12596-2007 | 沥青和沥青粘合剂.真空毛细管测定动力粘度 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| BS EN 13160-2-2003 | 检漏系统.压力和真空系统 | Leak detection systems - Pressure and vacuum systems |
| BS EN 13348-2001 | 铜和铜合金.医用气体或真空用无缝圆铜管 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| BS EN 13458-1-2002 | 低温容器.静态真空绝缘容器.基本要求 | Cryogenic vessels - Static vacuum insulated vessels - Fundamental requirements |
| BS EN 13458-2-2002 | 低温容器.静止的真空绝缘容器.设计、制造、检验和试验 | Cryogenic vessels - Static vacuum insulated vessels - Design, fabrication, inspection and testing |
| BS EN 13458-3-2003 | 低温容器.静态真空绝缘容器.操作要求 | Cryogenic vessels - Static vacuum insulated vessels - Operational requirements |
| BS EN 13530-1-2002 | 低温容器.大型可运输真空隔热容器.功能要求 | Cryogenic vessels - Large transportable vacuum insulated vessels - Fundamental requirements |
| BS EN 13530-2-2002 | 低温容器.大型可运输真空隔热容器.设计、制造、检验和测试 | Cryogenic vessels - Large transportable vacuum insulated vessels - Design, fabrication, inspection and testing |
| BS EN 13530-3-2002 | 低温容器.大型可运输真空隔热容器.操作要求 | Cryogenic vessels - Large transportable vacuum insulated vessels - Operational requirements |
| BS EN 13604-2002 | 铜和铜合金.电子管、半导体器件和真空设备用高电导率铜的制品 | Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications |
| BS EN 14091-2002 | 航天产品保证.航天材料筛选的热真空除气试验 | Space product assurance - Thermal vacuum outgassing test for the screening of space materials |
| BS EN 14197-1-2003 | 低温容器.静态非真空绝缘容器.基本要求 | Cryogenic vessels - Static non-vacuum insulated vessels - Fundamental requirements |
| BS EN 14197-2-2003 | 低温容器.静态非真空绝缘容器.设计、制造、检查和试验 | Cryogenic vessels - Static non-vacuum insulated vessels - Design, fabrication, inspection and testing |
| BS EN 14197-3-2004 | 低温容器.静态非真空绝缘容器.操作要求 | Cryogenic vessels - Static non-vacuum insulated vessels - Operational requirements |
| BS EN 14398-1-2003 | 低温容器.大型可运输的非真空绝缘容器.基本要求 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Fundamental requirements |
| BS EN 14398-2-2003 | 低温容器.大型可运输的非真空绝缘容器.设计、制造、检查和试验 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Design, fabrication, inspection and testing |
| BS EN 14398-3-2003 | 低温容器.大型可运输的非真空绝缘容器.操作要求 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Operational requirements |
| BS EN 14451-2005 | 防饮用水回流污染的装置.直通反真空阀DN 8至DN 80. A型D系列 | Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A |
| BS EN 14595-2005 | 危险物品运输罐.罐的辅助设备.压力和真空通气口 | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent |
| BS EN 3475-409-2002 | 航空航天系列.飞行器用电缆.试验方法.真空老化试验 | Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing |
| BS EN 3531-2007 | 航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型钢.真空感应熔炼和真空电弧再熔炼.固溶处理和沉淀处理.薄板材和 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a 6 mm - 1750 MPa Rm 2000 MPa |
| BS EN 3532-2007 | 航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型钢.真空感应熔炼和真空电弧再熔炼.固溶处理和沉淀处理.厚板材.6m | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm $3Q a 40 mm - 1750 MPa Rm 2000 MPa |
| BS EN 60312-1998 | 家用真空吸尘器.性能测量方法 | Vacuum cleaners for household use - Methods of measuring the performance |
| BS EN 60335-2-2-2003 | 家用和类似用途电器.安全.真空吸尘器和吸水清洁器的特殊要求 | Household and similar electrical appliances - Safety - Particular requirements for vacuum cleaners and water-suction cleaning appliances |
| BS EN 60335-2-69-2003 | 家用和类似用途电器的安全规范.工业和商业用湿式和干式真空吸尘器(包括电动刷)的特殊要求 | Specification for safety of household and similar electrical appliances - Particular requirements - Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use |
| BS EN 60704-2-1-2001 | 测定家用和类似用途电器气载噪声排放试验规程.专门要求.真空吸尘器专门要求 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Particular requirements - Particular requirements for vacuum cleaners |
| BS EN 60704-2-2-1995 | 家用和类似电器气载噪声测试规程.真空吸尘器专门要求 | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Particular requirements - Forced draught convection heaters |
| BS EN 737-1-1998 | 医疗气体管道系统.压缩医疗气体用和真空用终端设备 | Medical gas pipeline systems - Terminal units for compressed medical gases and vacuum |
| BS EN 737-3-2000 | 医疗用气体管道系统.压缩医疗气体和真空管道 | Medical gas pipeline systems - Pipelines for compressed medical gases and vacuum |
| BS EN 993-17-1999 | 成形密实耐火制品的试验方法.真空汞法对颗粒状材料体积密度的测定 | Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum |
| BS EN 993-18-2002 | 成形致密耐火制品的试验方法.真空汞法测定颗粒状材料体积密度 | Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum |
| BS EN ISO 10079-3-2000 | 医疗吸引设备.真空或压力吸引设备 | Medical suction equipment - Suction equipment powered from a vacuum or pressure source |
| BS EN ISO 13710-2004 | 石油、石化和天然气工业.往复式变容真空泵 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps |
| BS EN ISO 15364-2000 | 船舶与海上技术.散货船真空/压力阀 | Ships and marine technology - Pressure/vacuum valves for cargo tanks |
| BS EN ISO 15749-3-2004 | 船舶和海上技术.船舶和海上结构物的排水系统.真空系统用卫生排水和排水管道 | Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage, drain piping for vacuum system |
| BS EN ISO 1741-1995 | 葡萄糖.干燥处理重量损失测定.真空法 | Dextrose - Determination of loss in mass on drying - Vacuum oven method |
| BS EN ISO 2151-2004 | 声学.压缩机和真空泵的噪声试验规范.工程法(2级) | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) |
| BS EN ISO 7396-1-2007 | 医用气体管道系统.压缩医用气体和真空用管道系统 | Medical gas pipeline systems - Pipeline systems for compressed medical gases and vacuum |
| BS EN ISO 9100-1-2005 | 玻璃容器.真空凸缘瓶口.总则 | Glass containers - Vacuum lug finishes - General |
| BS EN ISO 9100-10-2005 | 玻璃容器.真空凸缘瓶口.普通规格77 | Glass containers - Vacuum lug finishes - 77 regular |
| BS EN ISO 9100-11-2005 | 玻璃容器.真空凸缘瓶口.普通规格82 | Glass containers - Vacuum lug finishes - 82 regular |
| BS EN ISO 9100-12-2005 | 玻璃容器.真空凸缘瓶口.普通规格89 | Glass containers - Vacuum lug finishes - 89 regular |
| BS EN ISO 9100-13-2007 | 玻璃容器.真空凸缘瓶口.普通规格100 | Glass containers - Vacuum lug finishes - 100 regular |
| BS EN ISO 9100-14-2007 | 玻璃容器.真空凸缘瓶口.普通规格100 | Glass containers - Vacuum lug finishes - 110 regular |
| BS EN ISO 9100-2-2006 | 玻璃容器.真空凸缘瓶口.中型33 | Glass containers - Vacuum lug finishes - 33 medium |
| BS EN ISO 9100-3-2006 | 玻璃容器.真空凸缘瓶口.普通规格38 | Glass containers - Vacuum lug finishes - 38 regular |
| BS EN ISO 9100-4-2006 | 玻璃容器.真空凸缘瓶口.中型38 | Glass containers - Vacuum lug finishes - 38 medium |
| BS EN ISO 9100-5-2005 | 玻璃容器.真空凸缘瓶口.普通规格43和48 | Glass containers - Vacuum lug finishes - 43 and 48 regular |
| BS EN ISO 9100-6-2005 | 玻璃容器.真空凸缘瓶口.普通规格53和58 | Glass containers - Vacuum lug finishes - 53 and 58 regular |
| BS EN ISO 9100-7-2005 | 玻璃容器.真空凸缘瓶口.深度58 | Glass containers - Vacuum lug finishes - 58 deep |
| BS EN ISO 9100-8-2005 | 玻璃容器.真空凸缘瓶口.普通规格63、66和70 | Glass containers - Vacuum lug finishes - 63, 66 and 70 regular |
| BS EN ISO 9100-9-2005 | 玻璃容器.真空凸缘瓶口.深度63、66和70 | Glass containers - Vacuum lug finishes - 63, 66 and 70 deep |
| BS ISO 10086-2-2004 | 煤.选煤用絮凝剂评价方法.旋转真空过滤设备中作为助滤剂的絮凝剂 | Coal - Methods for evaluating flocculants for use in coal preparation - Flocculants as filter aids in rotary vacuum filtration systems |
| BS ISO 11424-1997 | 内燃机气动系统和真空系统用橡胶软管和导管.规范 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification |
| BS ISO 15364-2000 | 船舶技术.货槽用压力/真空阀 | Ships and marine technology. Pressure/vacuum valves for cargo tanks |
| BS ISO 20421-1-2006 | 低温容器.大型可运输真空隔热容器.设计、制作、检测和试验 | Cryogenic vessels - Large transportable vacuum-insulated vessels - Design, fabrication, inspection and testing |
| BS ISO 21358-2007 | 真空技术.直角阀.气动传动装置尺寸和接口 | Vacuum technology - Right-angle valve - Dimensions and interfaces for pneumatic actuator |
| BS ISO 21360-2007 | 真空技术.测量真空泵性能的标准方法.一般描述 | Vacuum technology - Standard methods for measuring vacuum-pump performance - General description |
| BS ISO 4409-2007 | 液压流体传动.变容真空泵、马达和整体传动装置.测试和呈现基本稳态态性能的方法 | Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance |
| BS ISO 9803-1-2007 | 真空技术.管道配件的安装尺寸.非刀口法兰型 | Vacuum technology - Mounting dimensions of pipeline fittings - Non knife-edge flange type |
| BS ISO 9803-2-2007 | 真空技术.管道配件的安装尺寸.刀口法兰型 | Vacuum technology - Mounting dimensions of pipeline fittings - Knife-edge flange type |
| BS PAS 60-3-2004 | 含石棉材料的受控清除设备.H类真空吸尘器的操作、清洁和保养.实施规程 | Equipment used in the controlled removal of asbestos-containing materials - Operation, cleaning and maintenance of class H vacuum cleaners - Code of practice |
| BS S 138-1967 | 3%铬-钼-钒钢规范(真空重熔-空气淬火)[157公斤力/平方毫米(100吨力/平方英寸)];限定等圆断面30毫米(9/8英寸 | Specification for 3 per cent chromium-molybdenum-vanadium steel (vacuum remelted - air hardening) (157 kgf/mm2 (100 tonf/in2): limiting ruling section 30 mm (11/8 in)) |
| BS S 155-1976 | 镍-硅-铬-钼-钒钢(真空电弧重熔)坯、棒材、锻件及零件规范(1900-2100MPa;限定控制剖面75mm) | Specification for nickel-silicon-chromium-molybdenum-vanadium steel (vacuum arc remelted) billets, bars, forgings and parts (1900-2100 MPa: limiting ruling section 75 mm) |
| BS S 156-1976 | 4%镍-铬-钼表面硬化钢(真空电弧重熔)坯、棒材、锻件及零件规范(1320-1520MPa) | Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1320-1520 MPa) |
| BS S 162-1990 | 锻坯、锻件、棒材和零件用18%镍-钴-钼马氏体时效钢(1800MPa:双倍真空熔化)规范 | Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted) |
| 编号 | 中文名称 | 英文名称 |