| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| NF A51-127-2001 | 铜和铜合金.医用气体或真空用的无缝圆铜管 | (Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum.) |
| NF A51-310-2002 | 铜和铜合金.电子管、半导体器件和真空设施用高传导性的铜制产品 | (Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications.) |
| NF B40-339-1999 | 密实成型耐火制品的试验方法.第17部分:真空水银法测定粒状材料的松密度 | (METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 17 : DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACUUM. (EUROPEAN STANDARD EN 993-17).) |
| NF B40-340-2002 | 密实成型耐火产品试验方法.第18部分:利用真空渗水法测定颗粒材料的体密度 | (Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum.) |
| NF C73-161-2001 | 家用真空清洁器.性能的测量方法 | (Vaccum cleaners for household use - Methods of measuring the performance.) |
| NF C73-161/A1-2002 | 家用真空吸尘器性能的测量方法 | (Vaccum cleaners for household use - Methods of measuring the performance.) |
| NF C73-802-1995 | 家用和类似用途电器的安全.第2部分:真空吸尘器和吸水式吸尘器的特殊要求 | (Safety of household and similar electrical appliances - Part 2 : particular requirements for vacuum cleaners and water suction cleaning appliances.) |
| NF C73-802/A1-2000 | 家用和类似用途电器的安全.第2-2部分:真空吸尘器和吸水清洁器具特殊要求 | (Safety of household and similar electrical appliances - Part 2-2 : particular requirements for vacuum cleaners and water suction cleaning appliances.) |
| NF C73-869-1996 | 家用和类似电器的安全.第2部分:工业和商业用湿、干真空吸尘器包括电刷的特殊要求 | (Safety of household and similar electrical appliances. Part 2 : particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use.) |
| NF D21-001-2000 | 接触食品的材料和物品.家用保温容器.第1部分:真空器皿、保温瓶和保温水壶规范 | (Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1 : specification for vacuum ware, insulated flasks and jugs.) |
| NF E04-201-1994 | 工业流程控制.图形符号.第201部分:真空技术. | (Industrial processes. Symbolic representation. Vacuum technology.) |
| NF E29-720-1974 | 真空技术.高真空连接件.基本原理 | (VACUUM TECHNOLOGY. HIGH VACUUM CONNECTIONS. BASIC PRINCIPLES) |
| NF E29-721-1974 | 真空技术.高真空用法兰盘.尺寸 | (VACUUM TECHNOLOGY. HIGH VACUUM FLANGES. DIMENSIONS) |
| NF E29-722-1974 | 真空技术.高真空管颈用旋转法兰盘.装配环形件.尺寸 | (VACUUM TECHNOLOGY. HIGH VACUUM ROTATABLE FLANGES FOR USE WITH COLLARS. COLLAR RETAINING RINGS. DIMENSIONS) |
| NF E29-723-1974 | 真空技术.高真空管颈.尺寸 | (VACUUM TECHNOLOGY HIGH VACUUM COLLARS. DIMENSIONS) |
| NF E29-724-1974 | 真空技术.高真空带卡箍的快速连接管.尺寸 | (VACUUM TECHNOLOGY. CLAMPED TYPE QUICK RELEASE COUPLINGS FOR HIGH VACUUM. DIMENSIONS) |
| NF E29-726-1974 | 真空技术.真空管道用钢管.尺寸 | (VACUUM TECHNOLOGY. STEEL TUBES FOR VACUUM PIPES. DIMENSIONS) |
| NF E51-290-1996 | 压缩机和真空泵.安全要求.第1部分:压缩机 | (Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.) |
| NF E51-291-1996 | 压缩机和真空泵.安全要求.第2部分:真空泵 | (Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.) |
| NF E86-502-1-2002 | 低温车辆.大型可运输真空绝缘车辆.第1部分:基本要求 | (Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1 : fundamental requirements.) |
| NF E86-502-2-2003 | 低温容器.大体积可运输的真空绝缘容器.第2部分:设计、装配、检验和试验 | (Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.) |
| NF E86-502-3-2002 | 冷冻车辆.大型可运输真空绝缘车辆.第3部分:运行要求 | (Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3 : operational requirements.) |
| NF E86-504-1-2002 | 冷凝容器.静置真空绝缘压力容器.第1部分:基本原理要求 | (Cryogenic vessels - Static vacuum insulated vessels - Part 1 : fundamental requirements.) |
| NF E86-504-2-2003 | 低温容器.静压真空绝热容器.第2部分:设计、制造、检验和测试 | (Cryogenic vessels - Static vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.) |
| NF E86-504-3-2003 | 低温容器.静态真空绝缘容器.第3部分:操作要求 | (Cryogenic vessels - Static vacuum insulated vessels - Part 3 : operational requirements.) |
| NF E86-601-2-2003 | 检漏系统.第2部分:压力和真空系统 | (Leak detection systems - Part 2 : pressure and vacuum systems.) |
| NF H35-105-1-1993 | 制瓶工业.宽口玻璃容器.吸真空突出部的精整.第1部分:38mm标准直径 | (Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 1 : 38 mm nominal diameter.) |
| NF H35-105-2-1993 | 制瓶工业.宽口玻璃容器.吸真空突出部的精整.第2部分:43mm和48mm标准直径 | (Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 2 : 43 mm and 48 mm nominal diameters.) |
| NF H35-105-3-1993 | 制瓶工业.宽口玻璃容器.吸真空突出部的精整.第3部分:89mm标准直径 | (Bottling industry. Wide mouth glass containers. Vacuum finish. Part 3 : 89 mm nominal diameter.) |
| NF H35-105-4-1993 | 制瓶工业.宽口玻璃容器.吸真空突出部的精整.第4部分:100mm标准直径 | (Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 4 : 100 mm nominal diameter.) |
| NF H44-023-1980 | 烟雾发生器.内压真空容器的阻力测定 | (AEROSOL GENERATORS. DETERMINATION OF THE RESISTANCE OF THE EMPTY CONTAINERS TO INTERNAL PRESSURE. VERIFICATION OF CONFORMITY TO TEST PRESSURE.) |
| NF J38-540-2002 | 船舶和造船技术.载油舱用压力/真空阀 | (Ships and marine technology - Pressure/vacuum valves for cargo tanks.) |
| NF L52-250-409-2002 | 航空航天系列.飞行器用电缆.试验方法.第409部分:真空老化试验 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409 : air-excluded ageing.) |
| NF L95-012-2002 | 航天产品保证.航天材料筛选的热真空除气试验 | (Space product assurance - Thermal vacuum outgassing test for the screening of space materials.) |
| NF P16-200-1997 | 建筑物外部的真空排污系统 | (VACUUM SEWERAGE SYSTEMS OUTSIDE BUILDINGS. (EUROPEAN STANDARD EN 1091).) |
| NF P16-210-1999 | 建筑物中的真空排水系统 | (VACUUM DRAINAGE SYSTEMS INSIDE BUILDINGS. (EUROPEAN STANDARD EN 12109).) |
| NF P98-630-1991 | 横路标.公路上使用的标记.通过真空蒸馏测量冷油漆和涂料的挥发馏分 | (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. DETERMINATION OF VOLATILE CONTENTS OF PAINTS AND COLD PLASTICS BY VACUUM DISTILLATION.) |
| NF S31-704-2-1-2001 | 家用和类似用途电气设备.测定空气噪声的试验规程.第2-1部分:真空吸尘器的特殊要求 | (Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1 : particular requirements for vacuum cleaners.) |
| NF S76-016-2002 | 呼吸保护装置.防有毒气体和气体颗粒吸入的真空管过滤半罩式面具.要求,试验,标记 | (Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking.) |
| NF S90-240-1990 | 外科医疗器械.生物抽样用一次性器皿.真空器皿 | (Medico-surgical equipment. Single-use containers for biological samples. Evacuated tubes.) |
| NF S95-153-2001 | 医疗抽吸设备.第3部分:真空或压力源驱动的抽吸设备 | (Medical suction equipment - Part 3 : suction equipment powered from a vacuum or pressure source.) |
| NF S95-155-2000 | 医用气体管道系统.第3部分:压缩医用气体管道和真空管道 | (Medical gaz pipeline systems - Part 3 : pipelines for compressed medical gases and vacuum.) |
| NF S95-162-1998 | 医用气体管道系统.第1部分:医用压缩气体和真空装置的终端元件 | (Medical gas pipeline systems. Part 1 : terminal units for compressed medical gases and vacuum.) |
| NF T30-605-1978 | 涂料.室内工程涂层.真空筛选机测定法 | (PAINTS. FILLERS FOR INTERIOR USE. SIEVE ANALYSIS USING A VACUMM SIENER.) |
| NF T54-941-1999 | 塑料管道系统.热水和冷水系统.真空密封性的检验方法 | (Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum.) |
| NF T66-046-1999 | 沥青和沥青粘合剂.用真空毛细管法测定动粘滞度 | (Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary.) |
| NF T70-516-1995 | 军用高能材料.安全、易损坏性.真空状态下压力计化学兼容性的研究 | (ENERGETIC MATERIALS FOR DEFENSE. SAFETY, VULNERABILITY. STUDY OF CHEMICAL COMPATIBILITY BY VACUUM STABILITY WITH MANOMETER.) |
| NF T70-517-1995 | 军用高能材料.安全、易损坏性.真空状态下传感器化学兼容性的研究 | (ENERGETIC MATERIALS FOR DEFENSE. SAFETY, VULNERABILITY. STUDY OF CHEMICAL COMPATIBILITY BY VACUUM STABILITY WITH TRANSDUCER.) |
| NF T70-531-2003 | 国防用高能材料.安全性、易损性.水银管真空试验 | (Energetic materials for defense - Safety, vulnerability - Vacum test with mercury tube.) |
| NF T75-120-1976 | 香精油.真空蒸馏残渣的定量计算 | (ESSENTIAL OILS. DETERMINATION OF THE RESIDUE ON VACUUM DISTILLATION.) |
| NF V03-621-1994 | 葡萄糖.干燥后质量损失的测定.真空烘箱法 | (Dextrose. Determination of loss in mass on drying. Vacuum oven method.) |
| NF X10-500-1975 | 真空技术.词汇.一般术语 | (VACUUM TECHNOLOGY - VOCABULARY - GENERAL TERMS) |
| NF X10-501-1976 | 真空技术.词汇.真空泵 | (Vacuum technology. Vocabulary. Vacuum pumps.) |
| NF X10-507-1975 | 真空技术.喷雾离子泵.功能特性的测定 | (VACUUM TECHNOLOGY - SPUTTER-ION PUMPS - MEASUREMENT OF PERFORMANCE CHARACTERISTICS) |
| NF X10-511-1971 | 真空技术.真空体积初压泵.体积流量的测定 | (Vacuum technology-positive-displacement vacuum pumps-measurement ofthe volume rate of flow (pumping speed).) |
| NF X10-519-1975 | 真空技术.涡轮分子泵.功能特性的测定 | (VACUUM TECHNOLOGY - METHODS OF MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF TURBO-MOLECULAR PUMPS) |
| NF X10-520-1974 | 真空技术.工业真空系统中压力的测量 | (VACUUM TECHNOLOGY-PRESSURE MEASUREMENT IN INDUSTRIAL VACUUM SYSTEMS) |
| NF X10-521-1976 | 真空技术.压力计校准.直接比较法 | (VACUUM TECHNOLOGY. VACUUM GAUGES. CALIBRATION. METHOD BY DIRECT COMPARISON.) |
| NF X10-522-1976 | 真空技术.电离压力计.校准.直接比较法 | (VACUUM TECHNOLOGY. IONIZATION VACUUM GAUGES. CALIBRATION BY DIRECT COMPARISON.) |
| NF X10-523-1972 | 真空技术.低压压力计校准的一般方法 | (VACUUM TECHNOLOGY.GENERAL METHODS FOR LOW PRESSURE GAUGE CALIBRATION) |
| NF X10-524-1976 | 真空技术.压力计.校准.动力学法 | (VACUUM TECHNOLOGY. VACUUM GAUGES. CALIBRATION. DYNAMIC METHOD.) |
| NF X10-541-1976 | 真空技术.蒸汽喷射器的验收试验 | (VACUUM TECHNOLOGY. ACCEPTANCE TESTS FOR STEAM JET EJECTORS.) |
| 编号 | 中文名称 | 英文名称 |