| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI MH26.2-2007 | 焊接线架盖板的设计、测试和利用 | Design, Testing, and Utilization of Welded-Wire Rack Decking |
| ANSI Z49.1-2005 | 焊接、切割和相关工艺中的安全 | Welding, Cutting and Allied Processes, Safety in |
| ANSI/API 1104-1999 | 管道和相关设施的焊接 | Welding of Pipelines and Related Facilities |
| ANSI/API 599-2002 | 金属塞阀.法兰和焊接端 | Metal Plug Valves - Flanged and Welding Ends |
| ANSI/ASME B16.11-2009 | 焊接螺纹承口锻造管件 | Forged Fittings, Socket-Welding and Threaded |
| ANSI/ASME B16.22-2001 | 锻铜和铜合金钎焊接压力连接件 | Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings |
| ANSI/ASME B16.25-2007 | 对接焊接端 | Buttwelding Ends |
| ANSI/ASME B16.34-2009 | 法兰,螺纹和焊接端连接的阀门 | Valves - Flanged, Threaded, and Welding End |
| ANSI/ASME B29.200-2001 | 焊接钢型滚轧链条.焊接钢牵引链.附件和链轮齿 | Welded-Steel-Type Mill Chains, Welded-Steel-Type Drag Chains, Attachments, and Sprockets |
| ANSI/ASME B36.10M-2004 | 焊接锻钢管和无缝锻钢管 | Welded and Seamless Wrought Steel Pipe |
| ANSI/ASME BPVCSection IX-2010 | 焊接和钎焊质量(5/12/09和2/5/09 会议) | Welding and Brazing Qualifications (5/12/09 and 2/5/09 Meeting) |
| ANSI/ASTM A249/A 249M-2001 | 焊接奥氏体钢锅炉、过热器、热交换器和冷凝器管规范 | Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| ANSI/ASTM A312/A 312M-2001 | 无缝和焊接奥氏体不锈钢管规范 | Specification for Seamless and Welded Austenitic Stainless Steel Pipes |
| ANSI/ASTM A500-2001 | 圆钢与型钢的冷变形焊接与无缝碳素钢结构管规范 | Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ANSI/ASTM A688/A 688M-2001 | 奥氏体不锈钢焊接给水加热器管规范 | Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| ANSI/ASTM A704-1996 | 混凝土加筋用焊接普通钢棒或钢杆规范 | Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
| ANSI/ASTM A789/A 789M-2001 | 普通设备用无缝与焊接铁素体/奥氏体不锈钢管规范 | Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
| ANSI/ASTM A814/A 814M-2001 | 冷加工焊接奥氏体不锈钢管规范 | Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
| ANSI/ASTM B546-1998 | 电熔焊接镍铬钶钼合金(UNS N06617)、镍铁铬硅合金(UNS N08330 and UNS N08332)、 镍铬铁合金(UNS N06025)和 | Specification for Electric-Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ANSI/ASTM B619-2000 | 焊接用镍和镍钴合金管规范 | Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
| ANSI/ASTM B626-2001 | 焊接镍和镍钴合金管规范 | Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ANSI/ASTM B705-2000 | 镍合金焊接管规范 | Specification for Nickel-Alloy (UNS N06625 and N08825) Welded Pipe |
| ANSI/ASTM B710-1999 | 镍铁铬硅合金焊接管规范 | Specification for Nickel-Iron-Chromium Silicon-Alloy Welded Pipe |
| ANSI/ASTM B725-1996 | 焊接镍(UNS N02200/UNS No2201)和镍铜合金(UNS N04400)管规范 | Specification for Welded Nickel (UNS N02200/UNS No2201) and Nickel-Copper Alloy (UNS N04400) Pipe |
| ANSI/ASTM B730-1996 | 焊接镍和镍铜合金管(UNS N04400)规范 | Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube |
| ANSI/ASTM B742-1990 | 电焊接点用已加工优质银材料规范 | Specification for Fine Silver Electrical Contact Fabricated Material |
| ANSI/ASTM B804-1996 | UNS N08367和UNS N08926焊接管规范 | Specification for UNS N08367 and UNS N08926 Welded Pipe |
| ANSI/ASTM F1074-1997 | 焊接喇叭型绳栓规范 | Specification for Cleats, Welded Horn Type |
| ANSI/ASTM F1076-1997 | 管用扩张焊接及银黄铜套管连接件惯例 | Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| ANSI/ASTM F1145-1997 | 冷锻、焊接、锻制松紧螺纹扣规范 | Specification for Turnbuckles, Swaged, Welded, Cast, Forged |
| ANSI/ASTM F1199-1988 | 铸造(所有温度和压力)和焊接管线滤网(150 psig和150°F最大值)的规范 | Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
| ANSI/ASTM F1200-1988 | 装配式(焊接)管线滤网(大于150 psig和150°F)规范 | Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| ANSI/ASTM F1934-1998 | 焊接背包或登山帐篷试验方法 | Test Method for Welding a Backpack or Mountaineering Tent |
| ANSI/ASTM F722-1982 | 船上管道系统用焊接接头规范 | Specification for Welded Joints for Shipboard Piping Systems |
| ANSI/AWS A1.1-2001 | 焊接工业的米制实施规程指南 | Metric Practice Guide for the Welding Industry |
| ANSI/AWS A10.1M-2007 | 单相AC电阻焊接用次级电流传感线圈和焊接电流监视器校正和性能试验规范 | Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single Phase AC Resistance Welding |
| ANSI/AWS A2.4-2007 | 焊接、铜焊和无损检测用标准符号 | Standard Symbols for Welding, Brazing, and Nondestructive Examination |
| ANSI/AWS A3.0M/A 3.0-2009 | 标准焊接术语和定义 | Standard Welding Terms and Definitions |
| ANSI/AWS A4.3-1993 | 测定马氏体、贝氏体和铁素体钢电弧焊接金属中可扩散氢含量的标准方法 | Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding |
| ANSI/AWS A4.4M-2001 | 焊接助熔剂和电焊条助熔剂涂层含水量标准测定程序 | Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings |
| ANSI/AWS A5.01M/A 5.01-2008 | 焊接消耗品及相关工艺用程序指南.助熔剂和气体保护电焊接工艺 | Procurement Guidelines for Consumables-Welding and Allied Processes - Flux and Gas Shielded Electrical Welding Processes |
| ANSI/AWS A5.1/A 5.1M-2003 | 电弧焊接碳钢涂料焊条规范 | Carbon Steel Covered Arc-Welding Electrodes, Specification for |
| ANSI/AWS A5.11/A 5.11M-2010 | 保护金属电弧焊用镍和镍合金焊接电极规范 | Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS A5.2/A 5.2M-2007 | 氧燃料气焊接的碳钢和低合金钢棒材的规范 | Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding |
| ANSI/AWS A5.24/A 5.24M-2004 | 锆和锆合金焊接电极和焊条规范 | Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods |
| ANSI/AWS A5.32/A 5.32M-1997 | 焊接保护气体规范 | Specifications for Welding Shielding Gases |
| ANSI/AWS A5.34/A 5.34M-2007 | 助熔剂芯电弧焊接用镍合金电极的规范 | Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding |
| ANSI/AWS A5.4/A 5.4M-2006 | 屏蔽金属电弧焊不锈钢焊接电极 | Stainless Steel Welding Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS A5.9/A 5.9M-2006 | 裸露不锈钢焊接电极和焊棒规范 | Specification for Bare Stainless Steel Welding Electrodes and Rods |
| ANSI/AWS B1.10-2009 | 焊接非破坏性检验指南 | Guide for the Nondestructive Examination of Welds |
| ANSI/AWS B2.1-1-001-2006 | 在焊接条件下有垫板的3/16～3/4英寸厚的(M-1/P-1、1或2组)碳钢的屏蔽金属电弧焊的标准焊接程序规范(WPS) | Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the As-Welded Condition, With Backing |
| ANSI/AWS B2.1-1-002-2006 | 焊接条件下、有或没有垫板的3/16～ 7/8英寸(M-1/P-1)1或2组碳钢的气态钨电弧焊的标准焊接程序规范(WPS) | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition, With or Without Backing |
| ANSI/AWS B2.1-1-003-2002 | 在焊接条件下、有或没有垫板、10到18规格的镀锌钢的气体保护金属极电弧焊 | Gas Metal Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-004-2002 | 在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的气体保护金属极电弧焊 | Gas Metal Arc Welding of Carbon Steel (M1, Group 1), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-007-2002 | 在焊接条件下、有或没有垫板、10到18规格的镀锌钢的钨电极惰性气体保护焊 | Gas Tungsten Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-008-2002 | 在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的钨电极惰性气体保护焊 | Gas Tungsten Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-011-2002 | 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的镀锌钢的保护金属焊条电弧焊 | Standard Welding Procedure Specification – Shielded Metal Arc Welding of Galvanized Steel, 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-012-2002 | 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的碳钢(M1,组1)的保护金属焊条电弧焊 | Standard Welding Procedure Specification – Shielded Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gage in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-016-2005 | 在焊接或PWHT条件下1/8到1-1/2英尺厚E7018碳钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-017-2005 | 在焊接或PWHT条件下1/8到1-1/2英尺厚E6010碳钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或2 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-018-2005 | 在焊接条件下1/8到1-1/2英尺厚E71T-8碳钢的自保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1/S-1, 1或 | Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E71T-8, As-Welded Condition |
| ANSI/AWS B2.1-1-019-2005 | 在焊接条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的CO2保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1 | Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded Condition |
| ANSI/AWS B2.1-1-019-94-AMD 1-2010 | 在焊接条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的CO2保护助溶剂芯电弧焊的标准焊接程序规范(WPS)(M-1/P-1 | Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded Condition |
| ANSI/AWS B2.1-1-020-2005 | 在焊接或PWHT条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的75%Ar/25%CO2保护助溶剂芯电弧焊的标准焊接程序规 | Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-020-94-AMD 1-2010 | 在焊接或PWHT条件下1/8到1-1/2英尺厚E70T-1和E71T-1碳钢的75%Ar/25%CO2保护助溶剂芯电弧焊的标准焊接程序规 | Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-021-2005 | 在焊接或PWHT条件下1/8到1-1/2英尺厚ER70S-2和E7018碳钢的保护金属电弧焊和钨电极惰性气体保护电弧焊的标准 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-022-2005 | 在焊接或PWHT条件下1/8到1-1/2英尺厚E7018和E6010(垂直上升)碳钢的保护金属电弧焊的标准焊接程序规范(WPS)( | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-026-2005 | 在焊接或PWHT条件下1/8到1-1/2英尺厚E7018和E6010(垂直下降)碳钢的保护金属电弧焊的标准焊接程序规范(WPS)( | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition |
| ANSI/AWS B2.1-1-201-2007 | 主要管道用焊接条件下E6010(垂直向上)及E7018(垂直向上)1/8～3/4英寸厚碳钢(M-1/P-1/S-1,组1或组2)的铠装金 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applic |
| ANSI/AWS B2.1-1-202-2007 | 主要用于管道的、在焊接条件下,1/8到3/4英寸厚、E6010(垂直向下)及E7018(垂直向上)碳钢(M-1/P-1/S-1,1或2组 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Appl |
| ANSI/AWS B2.1-1-203-2007 | 焊接条件下,有或没有垫板,18规格镀锌钢(M-1)的气体金属电弧焊(短循环传输模式)的标准焊接程序规范(WPS) | Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Galvanized Steel (M-1), 18 through Gauge, in the As-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-204-2007 | 主要用于管道的、在焊接条件下,1/8到3/4英寸厚、E6010(底部垂直向下和垂直向上达到平衡)碳钢(M-1/P-1/S-1,1 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Ap |
| ANSI/AWS B2.1-1-205-2007 | 主要管道用焊接或PWHT条件下E6010(垂直向上)及E7018(垂直向上)1/8～1-1/2英寸厚碳钢(M-1/P-1/S-1,组1或组2) | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, (Primarily |
| ANSI/AWS B2.1-1-206-2007 | 带或不带衬板焊接条件下18～10规格碳钢与奥氏体不锈钢(M-1～M-8、P-8或S-8)的气体保护金属极电弧焊用标准焊 | Standard Welding Procedure Specification (WPS) for Gas Metal Arc Weldign (Short Circuiting Transfer Mode) of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1-207-2007 | 主要管道用焊接或PWHT条件下1/8～1-1/2英寸厚ER70S-2碳钢(M-1/P-1/S-1,组1或组2)的钨电极惰性气体保护焊用 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2, As-Welded or PWHT Condition (Primarily Pipe Applications) |
| ANSI/AWS B2.1-1-208-2007 | 主要管道用焊接或PWHT条件下1/8～1-1/2英寸厚E7018碳钢(M-1/P-1/S-1,组1或组2)的屏蔽金属电弧焊用标准焊接 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-209-2006 | 主要用于管道的、在焊接或PWHT条件下、1/8到1-1/2英寸厚、ER70S-2和E7018碳钢(M-1/P-1/S-1,1或2组)的屏蔽金 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition (Primarily Pip |
| ANSI/AWS B2.1-1-210-2001 | 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-211-2001 | 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1, ER70S-2, and E7018, As-Welded |
| ANSI/AWS B2.1-1-232-2006 | 主要管道设施仅平面位置焊接或PWHT条件下用ER70S-3和E7XT-X型1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2组碳钢的氩 | Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1)Group |
| ANSI/AWS B2.1-1-233-2006 | 仅平面位置焊接或PWHT条件下用ER70S-3型1～1/2英寸厚(M-1/P-1/S-1)1或2组碳钢的氩气加25%二氧化碳气体保护 | Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P |
| ANSI/AWS B2.1-1-234-2006 | 焊接或PWHT情况的主要管道设施用1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2组、E7XT-X型碳钢用氩气加25%二氧化碳的 | Standard Welding Procedure Specification (SWPS) for Argon plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch thick, E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Applicaitons |
| ANSI/AWS B2.1-1-235-2006 | 平面位置焊接或PWHT情况的主要管道设施用1/8～1-1/2英寸厚(M-1/P-1/S-1)1或2组、ER70S-3型碳钢的氩气加2%氧 | Standard Welding Procedure Specification (SWPS) for Argon plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch thick, ER70S-3, Flat Position Only, As-Welded or PWHT Condi |
| ANSI/AWS B2.1-1/8-006-2002 | 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的气体保护金属极电弧焊 | Gas Metal Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-18, or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1/8-010-2002 | 在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的钨电极惰性气体保护焊 | Gas Tungsten Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1/8-014-2002 | 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的碳钢与奥氏体不锈钢(M-1至M-18,或P-8)的保护金 | Standard Welding Procedure Specification – Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-1/8-228-2002 | 碳钢与奥氏体不锈钢屏蔽金属电弧焊(从M-1/P-1/S-1,组1或组2焊接到M-8/P-8/S-8, 组1)1/8到1-1/2英寸厚,ER309 | Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309-15, 16 or, 17, As-Welded Condition, Primari |
| ANSI/AWS B2.1-1/8-229-2002 | 碳钢与奥氏体不锈钢气体钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M- 8/P-8/S-8, 组1)1/8到1-1/2英寸厚ER30 | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded C |
| ANSI/AWS B2.1-1/8-230-2002 | 气体保护钨极弧焊的标准焊接程序规范(WPS),可熔嵌入根部的,碳钢与奥氏体不锈钢(M-1/P-1/S-1, 组 1 和 2 焊 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and |
| ANSI/AWS B2.1-1/8-231-2002 | 带可熔嵌入焊条的碳钢与奥氏体不锈钢气体保护钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M- 8/P-8/S-8, 组1) | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through |
| ANSI/AWS B2.1-4-217-2009 | 主要管路用焊接后状态ER80S-B2,1/8至1/2英寸厚,焊后热处理状态1/8至3/4英寸厚的钨铬钼钢气体弧焊(M-4/P-4,1 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-218-1999 | 标准焊接程序规范(WPS).主要用于管道的、在焊接或1/8到1-1/2英寸厚PWHT条件下、(M-4/P-4/S-4,1或2组)E8018- | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-219-1999 | 气体保护钨极弧焊以及铬钼钢的气体保护钨极弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组).在焊接条件下1/8到12 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER80S-B2 and E8018-B2, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-220-1999 | 标准焊接程序规范(WPS).主要用于IN515, ER80S-B2管道的、在焊接或1/8到3/4英寸厚PWHT条件下、(M-4/P-4/S-4, | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, IN515 and ER80S-B2, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-221-1999 | 气体保护钨极弧焊(自耗嵌入式焊缝根部)以及铬钼钢保护金属电弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组).在 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, IN515, ER80S-B2, and E8018-B2, Primarily Pipe Applications |
| ANSI/AWS B2.1-5A-222-1999 | 铬钼钢气体保护钨极弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下ER 90S-BS,1/8到1/2英寸厚或在PWHT条件 | Standard Welding Procedure Specification (WPS)for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-5A-223-1999 | 铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下ER 9018-BS,1/8到1/2英寸厚或在PWHT条件下 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-5A-224-1999 | 气体保护钨极弧焊以及铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下1/8到1/2英寸厚或在P | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER90S-B3 and E9018-B3, Primarily Pipe Applications |
| ANSI/AWS B2.1-5A-225-1999 | 标准焊接程序规范(WPS).主要用于IN521,ER90S-B3管道的、在焊接或1/8到3/4英寸厚PWHT条件下、(M-5A或P-5A)1/ | Standard Welding Procedure Specification (WPS)for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, IN521 and ER90S-B3, Primarily Pipe Applications |
| ANSI/AWS B2.1-5A-226-1999 | 气体保护钨极弧焊(自耗嵌入式焊缝根部)以及铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, IN521, ER90S-B3, and E9018-B3, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-005-2002 | 在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8或P-8)的气体保护金属极电弧焊 | Gas Metal Arc Welding of Austentic Stainless Steel (M-8 or P-8) 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-8-009-2002 | 在焊接条件下、有或没有垫板、10到18规格的不锈钢(M-8或P-8)的钨电极惰性气体保护焊 | Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-8-013-2002 | 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格的奥氏体不锈钢(M-8/P-8)的保护金属电弧焊 | Standard Welding Procedure Specification – Shielded Metal Arc Welding of Austenitic – Stainless Steel (M-8/P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1-8-023-2005 | 在焊接条件下1/8到1-1/2英尺厚奥氏体不锈钢的保护金属电弧焊的标准焊接程序规范(WPS)(M-8/P-8/S-8,1组) | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition |
| ANSI/AWS B2.1-8-024-2001 | 在焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保护焊的焊接程序规范(WP | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B2.1-8-025-2001 | 在焊接条件下、保护金属电弧焊之后的1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保 | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, As-Welded Condition |
| ANSI/AWS B2.1-8-212-2001 | 主要用于管道的、在ERXX焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-213-1997 | 主要用于管道的、在焊接条件下(M-8/P-8/S-8,组)1/8到1-1/2英寸E3XX-XX奥氏体不锈钢的药皮焊条电弧焊的标准 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-214-2001 | 标准焊接程序规范(WPS).主要用于管道的,在焊接条件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奥氏体不锈钢(M-8/P | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-215-2001 | 在 IN3XX和ER3XX焊接条件下、1/8到1-1/2英寸厚的自耗嵌入式奥氏体不锈钢(M-8/P-8/S-8,组1)钨电极惰性气体保 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 Inch Thick IN3XX and ER3XX, As-Welded Condition |
| ANSI/AWS B2.1-8-216-2001 | 标准焊接程序规范(WPS).焊接用, 1/8到1-1/2英寸厚IN3XX,ER3XX和E3XX-XX的奥氏体不锈钢(M-8/P-8/S-8,组1)的 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch Thick IN3XX, ER3XX, and E3XX-XX, As-Welded Condition |
| ANSI/AWS B2.1.22-015-2002 | 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格铝(M-22或P-22)的钨电极惰性气体保护焊 | Standard Welding Procedure Specification – Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing |
| ANSI/AWS B2.1/B 2.1M-2008 | 焊接工艺和性能认证用规范 | Specification for Welding Procedure and Performance Qualification |
| ANSI/AWS B2.3-2007 | 软钎焊接方法和性能合格规范 | Specification for Soldering Procedure and Performance Qualification |
| ANSI/AWS B2.4-2006 | 焊接工艺和热塑性塑料性能认证的规范 | Specification for Welding Procedure and Performance Qualification for Thermoplastics |
| ANSI/AWS B5.1-2003 | 焊接检验员的资格认证规范 | Specification for the Qualification of Welding Inspectors |
| ANSI/AWS B5.14-2009 | 焊接销售代表资质鉴定规范 | Specification for the Qualification of Welding Sales Representatives |
| ANSI/AWS B5.16-2006 | 焊接工程师资格认可规范 | Specification for the Qualification of Welding Engineers |
| ANSI/AWS B5.17-2008 | 焊接加工人员资格鉴定用规范 | Specification for the Qualification of Welding Fabricators |
| ANSI/AWS B5.2-2001 | 焊接检验专业人员和焊接检验助理人员资质规范 | Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants |
| ANSI/AWS B5.5-2000 | 焊接教员的资格认定 | Specification for the Qualification of Welding Educators |
| ANSI/AWS B5.9-2006 | 焊接监理资质规范 | Specification for the Qualification of Welding Supervisor |
| ANSI/AWS C1.1M/C 1.1-2000 | 电阻焊接推荐惯例 | Recommended Practices for Resistance Welding |
| ANSI/AWS C1.4M/C 1.4-2009 | 碳钢和低合金钢的电阻焊接规范 | Specification for Resistance Welding of Carbon and Low-Alloy Steels |
| ANSI/AWS C1.5-2008 | 电阻焊接技术员认证规范 | Specification for the Qualification of Resistance Welding Technician |
| ANSI/AWS C3.2M/C 3.2-2008 | 评定硬钎焊接头强度的标准方法 | Standard Methods for Evaluating the Strength of Brazed Joints |
| ANSI/AWS C3.8M/C 3.8-2005 | 黄铜焊接缝的超声检验推荐实施规程 | Recommended Practices for the Ultrasonic Examination of Brazed Joints |
| ANSI/AWS C5.10/C 5.10M-2003 | 焊接和等离子体电弧切割用保护气的推荐规程 | Recommended Practices for Shielding Gases for Welding and Plasma Arc Cutting |
| ANSI/AWS C6.1-2009 | 摩擦焊接的推荐实施规程 | Recommended Practices for Friction Welding |
| ANSI/AWS C6.2/C 6.2M-2006 | 金属焊接摩擦的合格和规范 | Specification for Qualification of Friction Welding of Metals |
| ANSI/AWS C7.1-1992 | 电子束焊接的推荐实施规程 | Recommended Practices for Electron Beam Welding |
| ANSI/AWS C7.3-1999 | 电子束焊接工艺规范 | Process Specification for Electron Beam Welding |
| ANSI/AWS C7.4/C 7.4M-2008 | 激光束焊接操作人员资格鉴定的程序规范 | Process Specification and Operator Qualification for Laser Beam Welding |
| ANSI/AWS D1.1/D 1.1M-2010 | 结构焊接代码.钢 | Structural Welding Code - Steel |
| ANSI/AWS D1.2/D 1.2M-2008 | 结构焊接规则.铝 | Structural Welding Code - Aluminum |
| ANSI/AWS D1.3/D 1.3M-2007 | 结构焊接规则.薄钢板 | Structural Welding Code - Sheet Steel |
| ANSI/AWS D1.4-1997 | 增强钢结构焊接规程 | Structural Welding Code - Reinforcing Steel |
| ANSI/AWS D1.4/D 1.4M-2005 | 结构焊接规范.钢筋 | Structural Welding Code - Reinforcing Steel |
| ANSI/AWS D1.5M/D 1.5-2007 | 桥梁焊接规则 | Bridge Welding Code |
| ANSI/AWS D1.6-2007 | 钢结构焊接规范.不锈钢 | Structural Welding Code - Stainless Steel |
| ANSI/AWS D1.8/D 1.8M-2009 | 结构焊接规范.地震增补 | Structural Welding Code - Seismic Supplement |
| ANSI/AWS D1.9/D 1.9M-2007 | 结构焊接代码.钛 | Structural Welding Code - Titanium |
| ANSI/AWS D10.11M/D 10.11-2007 | 焊接无背衬管的根部焊道指南 | Guide for Root Pass Welding of Pipe Without Backing |
| ANSI/AWS D10.12M/D 10.12-2000 | 焊接低碳钢管指南 | Guide for Welding Mild Steel Pipe |
| ANSI/AWS D10.18M/D 10.18-2008 | 铁素体/奥氏体双相不锈钢管和管道的焊接指南 | Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing |
| ANSI/AWS D10.4-1986 | 焊接奥氏体铬镍不锈钢管推荐惯例 | Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing, Recommended Practices for |
| ANSI/AWS D11.2-2006 | 铁铸件焊接指南 | Guide for Welding Iron Castings |
| ANSI/AWS D14.1/D 14.1M-2005 | 工业和工厂用起重机及其它物料运输设备的焊接规范 | Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment |
| ANSI/AWS D14.3/D 14.3M-2005 | 焊接、土方、建筑和农业设备的规范 | Specification for Welding, Earthmoving, Construction, and Agricultural Equipment |
| ANSI/AWS D14.4/D 14.4M-2005 | 机械和设备焊接接头规范 | Specification for Welded Joints in Machinery and Equipment |
| ANSI/AWS D14.5/D 14.5M-2009 | 压力机和压力元件焊接规范 | Specification for Welding of Presses and Press Components |
| ANSI/AWS D14.6-2004 | 设备的旋转元件的焊接规范 | Specification for Welding of Rotating Elements of Equipment |
| ANSI/AWS D15.1/D 15.1M-2007 | 汽车和机车用铁路焊接规范 | Railroad Welding Specification for Cars and Locomotives |
| ANSI/AWS D15.2-2003 | 铁路车辆用轨道和相关轨道元件焊接的推荐实施规范 | Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles |
| ANSI/AWS D16.1M/D 16-2004 | 机器人电弧焊接安全规范 | Specification for Robotic Arc Welding Safety |
| ANSI/AWS D16.1M/D 16.1-2004 | 机器人电弧焊接安全规范 | Specification for Robotic Arc Welding Safety |
| ANSI/AWS D16.2M/D 16.2-2007 | 机器人和自动焊接的元部件 | Components of Robotic and Automatic Welding |
| ANSI/AWS D16.3M/D 16.3-2008 | 机器人焊接用风险评估指南 | Risk Assessment Guide for Robotic Welding |
| ANSI/AWS D17.2/D 17.2M-2007 | 航空航天用点和缝电阻焊接的规范 | Specification for Aerospace Spot and Seam Resistance Welding |
| ANSI/AWS D18.1/D 18.1M-2009 | 卫生设施中管和管道系统焊接规范 | Specification for Welding of Tube and Pipe Systems in Sanitary (Hygienic) Applications |
| ANSI/AWS D18.3/D 18.3M-2005 | 卫生用途的槽罐、容器和其他设备的焊接规范 | Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications |
| ANSI/AWS D3.5-1993 | 钢船壳结构焊接指南 | Steel Hull Welding, Guide for |
| ANSI/AWS D3.6M-1999 | 水下焊接 | Underwater Welding |
| ANSI/AWS D3.7-2004 | 铝制船体焊接指南 | Guide for Aluminum Hull Welding |
| ANSI/AWS D3.9-2010 | 经过油漆底漆的焊接点分类用规范 | Specification for Classification of Weld-Through Paint Primers |
| ANSI/AWS D8.14M-2008 | 自动焊接质量规范.铝弧焊 | Specification for Automotive Weld Quality - Arc Welding of Aluminum |
| ANSI/AWS D8.1M-2007 | 汽车的焊接质量规范.钢的接触点焊 | Specification for Automotive Weld Quality - Resistance Spot Welding of Steel |
| ANSI/AWS D8.7-2004 | 汽车焊接质量的推荐实施规程.电阻点焊 | Recommended Practice for Automotive Weld Quality – Resistance Spot Welding |
| ANSI/AWS D9.1M/D 9.1-2006 | 金属薄板焊接代码 | Sheet Metal Welding Code |
| ANSI/AWS F1.1M-2006 | 焊接和有关工艺过程产生的悬浮颗粒的取样方法 | Method for Sampling Airborne Particulates Generated by Welding and Allied Processes |
| ANSI/AWS F1.2-2006 | 焊接和有关工艺中测量烟雾形成速度和总烟雾排放量的实验室方法 | Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes |
| ANSI/AWS F1.3M-2006 | 焊接环境污染评定的取样方法指南 | A Sample Strategy Guide for Evaluating Contaminants in the Welding Environment |
| ANSI/AWS F1.5M-2003 | 焊接和类似工艺用的气体取样和分析方法 | Sampling and Analyzing Gases from Welding and Allied Processes, Methods for |
| ANSI/AWS F1.6-2003 | 环境保护局(EPA)评价焊接排放物的指南和通风许可报告 | Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting |
| ANSI/AWS F2.3M-2001 | 透明焊接帘门和帘幕的使用和性能规范 | Specification for Use and Performance of Transparent Welding Curtains and Screens |
| ANSI/AWS F3.2M/F 3.2-2001 | 焊接烟尘通风指南 | Ventilation Guide for Weld Fume |
| ANSI/AWS F4.1-2007 | 容器和管道焊接和切割准备的推荐安全规程 | Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping |
| ANSI/AWS G1.2M/G 1.2-1999 | 热塑性塑料标准化超声焊接试件规范 | Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics |
| ANSI/AWS G1.6-2006 | 热气焊挤压和加热工具对塑料焊接检验师资格规范 | Specification for the Qualification of Plastics Welding Inspectors for Hot Gas Extrusion, and Heated Tool Blutt Thermoplastic Welds |
| ANSI/AWWA D100-2005 | 储水用碳素钢焊接箱 | Welded Carbon Steel Tanks for Water Storage |
| ANSI/CEMA 501.1-2003 | 焊接钢翼轮规范 | Specifications for Welded Steel Wing Pulleys |
| ANSI/CEMA B105.1-2009 | 焊接钢传输滑轮 | Welded Steel Conveyor Pulleys |
| ANSI/EIA 448-19A-2000 | 机电元件的试验标准.用气相系统法确立机械焊接的环境效应 | Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using a Vapor Phase System |
| ANSI/EIA 448-21A-2000 | 机电元件的试验标准.开关.用红外系统法确定机械焊接的交替环境效应 | Test Standard for Electromechanical Components - Switch Environmental Effects of Machine Soldering Using an Infrared System |
| ANSI/EIA 448-22-1990 | 耐焊接热的焊接试验方法 | Resistance to Soldering Heat, Soldering Method |
| ANSI/EIA 448-2A-2000 | 机电元件的试验标准.机械焊接的环境效应 | Test Standard for Electromechanical Components Environmental Effects of Machine Soldering |
| ANSI/EIA 638-1995 | 表面的可焊接性试验 | Surface Mount Solderability Test |
| ANSI/EIA 654-2000 | 电线和电气元件耐焊接热试验程序 | Resistance to Soldering Heat Test Procedure for Wire and Electrical Components |
| ANSI/EIA-364-47A-2001 | 非焊接缠绕的电连接器用导体非缠绕试验程序 | Conductor Unwrap Test Procedure for Solderless Wrapped Electrical Contacts |
| ANSI/EIA-654-2000 | 电线和电器元件耐焊接热试验程序 | Resistance to Soldering Heat Test Procedure for Wire and Electrical Components |
| ANSI/FM 4950-2007 | 热加工用焊接垫、焊接毯和焊接护帘 | Welding Pads, Welding Blankets and Welding Curtains for Hot Work Operations |
| ANSI/IPC J-STD-001D-2005 | 焊接的电气和电子组件的要求 | Requirements for Soldered Electrical and Electronic Assemblies |
| ANSI/ISA 75.08.03-2001 | 承插焊接端和螺旋端球型控制阀的端面间尺寸(ANSI类型150、300、600、900、1500和2500) | Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
| ANSI/ISA S75.08.03-2001 | 承插焊接端头和螺旋端头球状控制阀的面到面尺寸 | Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
| ANSI/NAAMM MBG533-2009 | 钢,铝预制件和不锈钢棒格栅的焊接标准 | Welding Standard for Fabrication of Steel, Aluminum, and Stainless Steel Bar Grating |
| ANSI/NFPA 51-2006 | 焊接、切割和相关工艺用氧燃料气系统的设计和安装用标准 | Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes |
| ANSI/NFPA 51B-2009 | 焊接、切削和其它热加工防火标准 | Standard for Fire Prevention During Welding, Cutting, and Other Hot Work |
| ASME B16.11-2001 | 锻制承插焊接和螺纹配件 | (Forged fittings, socket-welding and threaded) |
| ASME B16.34-1996 | 阀门.法兰、螺纹和焊接端 | (Valves - Flanged, threaded, and welding end) |
| ASME B16.34a Addenda-1998 | 带螺纹的法兰式阀门和焊接端.附录 | (Valves - Flanged, threaded, and welding end; Addenda) |
| ASME B29.16M-1995 | 焊接钢型碾磨机链、附件和链轮齿 | (Welded steel type mill chains, attachments, and sprocket teeth) |
| ASME B29.18M-1993 | 焊接钢型牵引链、附件和链轮齿 | (Welded steel-type drag chains, attachments, and sprocket teeth) |
| ASME B29.21M-1996 | 水、污水处理设备用700级焊接钢和铸造链,附件及链轮 | (700 class welded steel and cast chains, attachments and sprockets for water and sewage treatment plants) |
| ASME BPVC Section 9-2001 | ASME锅炉和压力容器规则.第9节:焊接和钎焊合格 | (ASME Boiler & Pressure Vessel Code - Section 9: Welding and Brazing Qualifications) |
| ASTM A1012-2002(2007) | 无缝和焊接铁素体、奥氏体和双合金钢冷凝器和带整体散热片的热交换器管的标准规范 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM A1064/A1064M-2009 | 钢丝绳和焊接线缆加固的技术标准规范,混凝土的平整和变形 | Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete |
| ASTM A185/A185M-2007 | 混凝土用普通焊接钢丝网标准规范 | Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete |
| ASTM A214/A214M-1996(2005) | 热交换器和冷凝器用电阻焊接碳钢管的标准规范 | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
| ASTM A249/A249M-2010 | 焊接奥氏体钢锅炉、过热器、热交换器和冷凝器管的标准规范 | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| ASTM A268/A268M-2010 | 一般用途的无缝和焊接铁素体与马氏体不锈钢管标准规范 | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| ASTM A269-2010 | 通用无缝和焊接奥氏体不锈钢管标准规范 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| ASTM A270/A270M-2010 | 卫生设施用无缝钢和焊接奥氏体不锈钢管的标准规范 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
| ASTM A312/A312M-2009 | 无缝焊接重冷处理奥氏体不锈钢管标准规范 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM A333/A333M-2010 | 低温设备用无缝和焊接钢管的标准规范 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service |
| ASTM A409/A409M-2009 | 腐蚀性或高温条件用焊接大直径奥氏体钢管标准规范 | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
| ASTM A423/A423M-2009 | 无缝和电焊接低合金钢管的标准规范 | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
| ASTM A488/A488M-2010 | 钢铸件焊接规程和工作人员的合格鉴定的标准规程 | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel |
| ASTM A498-2006 | 带整体散热片的无缝焊接碳钢热交换管的标准规范 | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins |
| ASTM A500/A500M-2010 | 圆形与异型冷成型焊接与无缝碳素钢结构管标准规范 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A501-2007 | 热成型焊接与无缝碳素钢结构管的标准规范 | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
| ASTM A53/A53M-2007 | 无缝焊接、含锌涂层、黑色热浸镀钢管标准规范 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A554-2010 | 焊接的不锈钢机械管用标准规范 | Standard Specification for Welded Stainless Steel Mechanical Tubing |
| ASTM A688/A688M-2010 | 焊接奥氏体不锈钢给水加热器管用标准规范 | Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| ASTM A724/A724M-2009 | 制作焊接层压容器用淬火加回火的碳锰硅压力容器钢板的标准规范 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels |
| ASTM A758/A758M-2009 | 改良缺口韧性的锻造碳钢柄焊接管配件的标准规范 | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
| ASTM A774/A774M-2009 | 低温和中等温度条件下的一般腐蚀性服务用焊接锻造奥氏体不锈钢配件标准规范 | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures |
| ASTM A790/A790M-2009a | 无缝与焊接铁素体/奥氏体不锈钢管的标准规范 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
| ASTM A803/A803M-2010 | 焊接铁素体不锈钢给水加热器管用标准规范 | Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes |
| ASTM A813/A813M-2009 | 单或双焊接奥氏体不锈钢管的标准规范 | Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
| ASTM A860/A860M-2009 | 锻造的高强度低合金钢焊接柄接的标准规范 | Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings |
| ASTM A865/A865M-2006 | 钢管连接用黑色或镀锌(电镀)焊接或无缝钢螺纹接头标准规范 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
| ASTM A933/A933M-2007 | 加固用乙烯基(PVC)镀层钢丝和焊接钢丝网的标准规范 | Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement |
| ASTM A952/A952M-2002(2010) | 锻造80级和100级钢提升组件和焊接附件链接件用标准规范 | Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links |
| ASTM B338-2010 | 冷凝器和热交换器用无缝和焊接钛及钛合金管标准规范 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM B353-2007 | 核设施(核燃料覆层除外)用锻制锆及锆合金无缝与焊接管的标准规范 | Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding) |
| ASTM B363-2006a | 无缝和焊接的非合金钛及钛合金焊接配件标准规范 | Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings |
| ASTM B447-2007 | 焊接铜管的标准规范 | Standard Specification for Welded Copper Tube |
| ASTM B521-1998(2004) | 钽和钽合金无缝和焊接管标准规范 | Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes |
| ASTM B608-2007 | 焊接铜合金管的标准规范 | Standard Specification for Welded Copper-Alloy Pipe |
| ASTM B619-2006 | 焊接的镍和镍钴合金管的标准规范 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
| ASTM B626-2006 | 焊接镍和镍钴合金管标准规范 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ASTM B640-2007 | 空调及制冷设备用焊接铜管标准规范 | Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service |
| ASTM B673-2005e1 | UNS N08925、UNS N08354和UNS N08926焊接管的标准规范 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| ASTM B674-2005 | UNS N08925、UNS N08354和UNS N08926焊接管的标准规范 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube |
| ASTM B675-2002(2007) | UNS NO8367焊接管标准规范 | Standard Specification for UNS N08367 Welded Pipe |
| ASTM B726-2002(2006) | 镍铬钼钴钨铁硅合金(UNS N06333)焊接管的标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ASTM B757-2000(2006) | 镍铬钼钨合金焊接管标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe |
| ASTM B758-2000(2006) | 镍铬钼钨合金焊接管标准规范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube |
| ASTM B804-2002(2007) | UNS N08367和UNS N08926焊接管标准规范 | Standard Specification for UNS N08367 and UNS N08926 Welded Pipe |
| ASTM B891-1998(2004) | 带集成散热片的无缝和焊接钛及钛合金冷凝器和热交换器管的标准规范 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B919-2001(2006) | 内部增强的焊接铜热交换器管标准规范 | Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement |
| ASTM B924-2002(2006) | 具有整体散热叶片的冷凝器及热交换器用无缝及焊接镍合金管标准规范 | Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B944-2006 | 铜铍焊接热交换器和冷凝管标准规范(UNS No. C17510) | Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510) |
| ASTM B956-2010 | 带集成散热片的焊接铜和铜合金冷凝器及热交换器管件的标准规范 | Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins |
| ASTM C1147-2001(2006) | 耐化学腐蚀热塑(性)塑料的短期拉伸焊接强度测定的标准实施规程 | Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics |
| ASTM E1032-2006 | 焊接件射线检验的标准试验方法 | Standard Test Method for Radiographic Examination of Weldments |
| ASTM E1648-1995(2006) | 用于检验焊接中铝的标准参考射线照片 | Standard Reference Radiographs for Examination of Aluminum Fusion Welds |
| ASTM E749-2007 | 连续焊接时声排放监控的标准实施规程 | Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
| ASTM F1145-2005 | 型锻、焊接、锻制松紧螺纹扣的标准规范 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| ASTM F2527-2005e1 | 外科植入物用锻造无缝和焊接及拉制的钴合金小直径管的标准规范（UNS R30003、 UNS R30008、 UNS R30035、 U | Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537) |
| ASTM F256-2005e1 | 含有18%或26%铬的铬铁焊接用合金的标准规范 | Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium |
| ASTM F31-2005 | 42%镍6%铬铁焊接用合金的标准规范 | Standard Specification for 42% Nickel-6% Chromium-Iron Sealing Alloy |
| IEEE 1584-2002 | 电弧闪光焊接危害计算执行指南 | (Guide for performing arc-flash hazard calculations) |
| 编号 | 中文名称 | 英文名称 |