| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| NF A03-720-2-2002 | 混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维 | (Steel for the reinforcement and prestressing of concrete - Test methods - Part 2 : welded fabric.) |
| NF A35-018-1984 | 钢筋混凝土用钢筋.焊接的适合性 | (Concrete reinforcing bars. Suitability for welding.) |
| NF A35-019-2-1996 | 钢筋混凝土用钢筋.可焊刻痕丝制钢筋.第2部分:焊接钢筋网 | (Concrete reinforcing steels. Reinforcing steels made of weldable indented wires. Part 2 : welded fabric.) |
| NF A35-021-1998 | 混凝土用钢材.用于增强钢制备的可焊接金属线 | (STEELS FOR CONCRETE. WELDABLE WIRES USED FOR THE FABRICATION OF REINFORCING STEELS.) |
| NF A35-052-1987 | 钢铁产品.带改进粘附性的焊接钢丝网和钢丝用非合金钢线材 | (Iron and steel. Unalloyed steel wire rod for welded fabric and wire with improved adherence.) |
| NF A36-000-1979 | 结构钢和锅炉与压力容器用钢的焊接特性的推荐规范 | (RECOMMENDATIONS CONCERNING THE WELDABILITY OF STRUCTURAL STEEL AND OF BOILER AND PRESSURE VESSELS STEEL.) |
| NF A36-205-5-2003 | 压力容器用钢制扁平产品.第5部分:热机轧制的可焊接细粒钢 | (Flat products made of steels for pressure purposes - Part 5 : weldable fine grain steels, thermomechanically rolled.) |
| NF A36-205-6-2003 | 压力容器用钢制扁平产品.第6部分:可焊接淬火和回火细粒钢 | (Flat products made of steels for pressure purposes - Part 6 : weldable fine grain steels, quenched and tempered.) |
| NF A36-211-1997 | 焊接气体气缸用薄钢板和条带 | (Steel sheet and strip for welded gas cylinders.) |
| NF A36-212-2002 | 固定近海结构的可焊接结构钢.技术交货条件 | (Weldable structural steels for fixed offshore structures - Technical delivery conditions.) |
| NF A36-226-2001 | 具有规定的高温特性的压力容器用热轧可焊接钢棒 | (Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.) |
| NF A36-605-1982 | 锅炉和压力容器用焊接钢冲压锻件.碳钢和碳锰钢.牌号与型号 | (Weldable steel drip forged articles for boilers and pressure vessels. Carbon and carbon-manganese steels. Grades and types .) |
| NF A36-606-1982 | 锅炉和压力容器用焊接钢冲压锻件.钼、锰钼和铬钼合金钢.牌号和型号 | (Weldable steel drop forged articles for boilers and pressure vessels. Mo, Mn/Mo and Cr/Mo alloy steels. Grades and types.) |
| NF A36-620-4-1999 | 承压用钢锻件.第4部分:高弹性强度的可焊接细粒钢 | (STEEL FORGINGS FOR PRESSURE PURPOSES. PART 4 : WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH. (EUROPEAN STANDARD EN 10222-4).) |
| NF A36-620-4/A1-2002 | 承压用钢锻件.第4部分:高弹性强度的可焊接细晶粒钢 | (Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength.) |
| NF A49-004-1984 | 钢管.无缝管和圆截面焊接管及焊接配件.尺寸总图及优选 | (Steel tubes. Seamless and welded tubes with circular section and supplies to be welded. General outlay of dimensions. Preferential selection.) |
| NF A49-005-2003 | 焊接和无缝钢管.管的尺寸和单位长度重量的一览表 | (Seamless and welded steel tubes - General tables of dimensions and masses per unit length.) |
| NF A49-141-1978 | 钢管.一般商业用中压平端焊接钢管.（尺寸.交货技术条件.） | (STEEL TUBES. WELDED PLAIN END TUBES OF COMMERCIAL QUALITY FOR GENERAL PURPOSES AT MEAN PRESSURE. DIMENSIONS TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-145-1978 | 钢管.热加工细螺纹焊接钢管.（尺寸.交货技术条件.） | (STEEL TUBES. HOT-FINISHED WELDED TUBES SUITABLE FOR THREADING.DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-147-1980 | 钢管.一般用和管道用光端纵向焊接钢管.奥氏体不锈钢.（尺寸.交货技术条件.） | (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-148-1980 | 钢管.一般用和管道用光端纵向焊接钢管.铁素体不锈钢.（尺寸.交货技术条件.） | (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-150-1985 | 钢管.水管系统用涂覆或保护焊接管.尺寸.交货技术条件 | (Steel tubes. Welded tubes intended to be coated or protected for use in water piping systems. Dimensions. Technical delivery conditions.) |
| NF A49-151-2003 | 包括饮用水在内的含水液体输送用焊接不锈钢管.交货技术件 | (Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.) |
| NF A49-160-1979 | 钢管.混凝土包的加热板用的焊接钢管.（尺寸.交货技术条件.） | (STEEL TUBES. WELDED TUBES FOR HEATING PANELS ENCASED IN CONCRETE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-170-1-1999 | 对缝焊接管道配件.第1部分:一般使用和无特殊检验要求的锻碳钢 | (Butt-welding pipe fittings - Part 1 : Wrought carbon steel for general use and without specific inspection requirements.) |
| NF A49-189-1980 | 钢管.90度镀锌3d样式的焊接曲线.（尺寸.交货技术条件.） | (STEEL TUBES. BUTT WELDING,NIGHT-ANGLED BENDS,3D,GALVANIZED DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-191-1975 | 钢管.毛细管焊接或焊接钎接用钢或铸铁接头.（尺寸.交货技术条件.） | (STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE OF STEEL OR CAST IRON FOR CAPILLARY BRAZING OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-192-1981 | 钢管.压力容器用内螺纹非合金钢焊接套管 | (STEEL TUBES. WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE EQUIPMENT.) |
| NF A49-201-1-2002 | 焊接压力钢管.交货技术条件.第1部分:规定室温特性的非合金钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.) |
| NF A49-201-2-2002 | 焊接压力钢管.交货技术条件.第2部分:规定高温特性的电焊合金和非合金钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2 : electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.) |
| NF A49-201-3-2002 | 焊接压力钢管.交货技术条件.第3部分:合金细晶粒结构钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.) |
| NF A49-201-4-2002 | 焊接压力钢管.交货技术条件.第4部分:规定低温特性的电焊非合钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4 : electric welded non-alloy steel tubes with specified low temperature properties.) |
| NF A49-201-5-2002 | 焊接压力钢管.交货技术条件.第5部分:规定高温特性的埋弧焊接非合金和合金钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5 : submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties.) |
| NF A49-201-6-2002 | 焊接压力钢管.交货技术条件.第6部分:规定低温特性的埋弧焊接非合金钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6 : submerged arc welded non-alloy steel tubes with specified low temperature properties.) |
| NF A49-244-1993 | 钢管.压力设备用焊接奥氏体不锈钢和奥氏铁素体轧制钢管的尺寸和技术交货条件 | (STEEL TUBES. WELDED AUSTENITIC STAINLESS AND AUSTENITIC FERRITIC STEEL ROLLED TUBES FOR PRESSURE SERVICE. DIMENSIONS, TECHNICAL CONDITIONS FOR DELIVERY.) |
| NF A49-247-1981 | 钢管.热交换器用纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件 | (Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-249-1980 | 钢管.食品工业用光端纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件 | (Steel tubes. Longitudinally welded plain end tubes for the food industry. Austenitic stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-285-1982 | 钢管.有质量要求的非合金或合金钢制对缝焊接椭圆底座.尺寸.交货技术条件 | (Steel tubes. Unalloyed or alloy steel butt welding elliptic caps with quality requirements. Dimensions. Technical delivery conditions.) |
| NF A49-289-1990 | 钢管.用于高低温条件下的对缝焊接管状配件.非合金、合金和不锈钢.尺寸.技术交货条件 | (Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-296-1983 | 钢管.带质量要求的熔焊非合金或合金钢制等径或缩径焊接三通管.尺寸.交货技术条件 | (Steel tubes. Unalloyed or alloy steel butt welding tees made by saw process with equal or reduced branches, with quality requirements. Dimensions. Technical delivery conditions.) |
| NF A49-300-2-2003 | 精密装置用钢管.交货技术条件.第2部分:焊接冷拉管 | (Steel tubes for precision applications - Technical delivery conditions - Part 2 : welded cold drawn tubes.) |
| NF A49-300-3-2003 | 精密装置用钢管.技术交货条件.第3部分:焊接冷分级管 | (Steel tubes for precision applications - Technical delivery conditions - Part 3 : welded cold sized tubes.) |
| NF A49-300-5-2003 | 精密用途钢管.技术交货条件.第5部分:焊接冷精加工方形和矩形钢管 | (Steel tubes for precision applications - Technical delivery conditions - Part 5 : welded and cold sized square and rectangular tubes.) |
| NF A49-341-1975 | 钢管.机械用精密焊接钢管.（尺寸.交货技术条件.） | (STEEL TUBES-PRECISION WELDED TUBES FOR MECHANICAL APPLICATION-DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-343-1980 | 钢管.机械用D小于或等于168.3mm的纵向焊接钢管.（尺寸.交货技术条件.） | (STEEL TUBES. LONGITUDINALLY WELDED D INFERIOR OR EQUAL TO 168,3 MM FOR ENGINEERING USE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-540-1-1997 | 非合金细晶粒结构钢的冷成形焊接结构空心型材.第1部分:交货技术要求 | (Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 1 : technical delivery requirements.) |
| NF A49-647-1979 | 钢管.不锈钢、铁素体和奥氏体钢制圆形、正方形、矩形或椭圆形建筑用焊接钢管.（尺寸.交货技术条件.） | (STEEL TUBES. STRUCTURAL WELDED TUBES,CIRCULAR,SQUARE,RECTANGULAR OR OVAL,IN FERRITIC OR AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL CONDITIONS OF DELIVERY.) |
| NF A49-716-1998 | 钢管.焊接接头镀膜配件和管的外结构. | (STEEL TUBE. EXTERNAL CONSTITUTION OF TUBE AND FITTING COATING FOR WELDED JOINT.) |
| NF A49-875-1-1996 | 钢管的无损检测.第1部分:证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 | (Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.) |
| NF A49-875-11-2000 | 钢管的无损检验.第11部分:检测表面缺陷用无缝和焊接钢管的液体渗透试验 | (Non-destructive testing of steel tubes - Part 11 : liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections.) |
| NF A49-875-12-2000 | 钢管的无损检验.第12部分:检测表面缺陷用无缝和焊接锰钢管的磁粉检测 | (Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.) |
| NF A49-875-13-2000 | 钢管的无损检验.第13部分:无缝和焊接(埋弧焊)钢管的自动全周边超声厚度检测 | (Non-destructive testing of steel tubes - Part 13 : automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged ar welded) steel tubes.) |
| NF A49-875-14-2000 | 钢管的无损检验.第14部分:层面缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动超声试验 | (Non-destructrive testing of steel tubes - Part 14 : automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes detection of laminar imperfections.) |
| NF A49-875-15-2000 | 钢管的无损检验.第15部分:层面缺陷探测用焊接钢管的生产用焊接带材/板材自动超声试验 | (Non-destructive testing of steel tubes - Part 15 : automatic ultrasonic testing of strip/plate used in the manufacure of welded steel tubes for the detection of laminar imperfections.) |
| NF A49-875-16-2000 | 钢管的无损检验.第16部分:层面缺陷探测用焊接钢管的焊缝邻近区域的自动超声试验 | (Non-destructive testing of steel tubes - Part 16 : automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections.) |
| NF A49-875-17-2000 | 钢管的无损检验.第17部分:层面缺陷探测用无缝和焊接钢管末端超声试验 | (Non-destructive testing of steel tubes - Part 17 : ultrasonic testing of tubes ends of seamless and welded steel tubes for the detection of laminar imperfections.) |
| NF A49-875-18-2000 | 钢管的无损检验.第18部分:层面缺陷探测用无缝和焊接锰钢管末端磁粉检验 | (Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections.) |
| NF A49-875-2-2000 | 钢管的无损检验.第2部分:检验液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外)的自动涡流试验 | (Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of) |
| NF A49-875-3-2000 | 钢管的无损检验.第3部分:检测缺陷用无缝和焊接钢管(埋弧焊除外)的自动涡流试验 | (Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections.) |
| NF A49-875-5-2000 | 钢管的无损检验.第5部分:检测纵向缺陷用无缝和焊接(除埋弧焊)锰钢管的自动全周边电磁变换器/磁漏试验 | (Non-destructive testing of steel tubes - Part 5 : automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for) |
| NF A49-875-7-1996 | 钢管的无损试验.第7部分:纵向缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动全周边超声波试验 | (Non destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.) |
| NF A50-425-1998 | 轻金属及其合金.危险产品传输箱构造可焊接产品 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDABLE PRODUCTS FOR THE CONSTRUCTION OF TANKS FOR THE TRANSPORTATION OF DANGEROUS GOODS.) |
| NF A50-650-4-1997 | 铝和铝合金.挤压棒材.焊接设备的特殊要求 | (Aluminium and aluminium alloys. Drawing stock. Part 4 : specific requirements for welding applications.) |
| NF A50-802-1988 | 铝和铝合金.大直径焊接管.尺寸和公差 | (ALUMINIUM AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED TUBES. DIMENSIONS AND TOLERANCES.) |
| NF A51-307-2003 | 铜和铜合金.焊接和钎焊用棒材和线材 | (Copper and copper alloys - Rod and wire for welding and braze welding.) |
| NF A80-002-2003 | 焊接.焊接和相关工艺的多语种术语列表 | (Welding - Multilingual list of terms for welding and related processes.) |
| NF A80-010-1997 | 焊接.工作位置.坡度角和旋转角的定义 | (Welds. Working positions. Definitions of angles of slope and rotation.) |
| NF A80-021-2000 | 焊接及有关工艺.工艺和参考值的命名 | (Welding and allied processes - Nomenclature of processes and reference numbers.) |
| NF A80-022-1999 | 焊接.带说明的多语种接头术语 | (WELDING. MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS. (EUROPEAN STANDARD EN 12345).) |
| NF A80-230-1-1998 | 焊接和合金过程.金属材料几何缺陷的分类.第1部分:熔焊(欧洲标准6520-1) | (Welding and allied processes. Classification of geometric imperfections in metallic materials. Part 1 : fusion welding.) |
| NF A80-230-2-2003 | 焊接和相关工艺.金属材料中几何缺陷的分类.第2部分:带压焊接 | (Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2 : welding with pressure.) |
| NF A81-053-1989 | 焊接.钎焊.硬钎焊.焊条.验收试验规程 | (WELDING. BRASING. SOLDERING. BRAZE-WELDING. FILLER MATERIALS. ACCEPTANCE TESTING PROCEDURES.) |
| NF A81-056-2000 | 焊条.焊接及有关工艺用焊条的生产、供应和分配的质量要求 | (Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes.) |
| NF A81-303-2003 | 手工电弧焊用涂敷焊条.焊接金属沉积方法.硬度试验 | (Covered electrodes for manual metal arc welding - Procedure for the deposition of weld metal - Hardness tests.) |
| NF A81-304-2002 | 焊接消耗品.化学分析用的焊接金属垫片的沉积 | (Welding consumables - Deposition of a weld metal pad for chemical analysis.) |
| NF A81-305-2001 | 焊接和有关工艺.铁素体钢电弧焊金属中氢含量的测定 | (Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal.) |
| NF A81-309-1995 | 焊接可熔化性.非合金和低合金钢的手工金属弧焊接用药皮焊条 | (Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification.) |
| NF A81-320-2001 | 焊接消耗品.通过测量可扩散氢测定手工电弧焊电极的抗湿性 | (Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen.) |
| NF A81-325-1997 | 焊条.非合金钢和细晶粒钢制惰性气体保护钨焊接用棒材,线材和镀层 | (WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).) |
| NF A81-331-1984 | 焊接、硬钎焊和硬焊铝及铝合金用填充金属材料.符号.规范 | (Filler materials for welding, brazing and braze welding aluminium and aluminium alloys. Symbolization. Specifications.) |
| NF A81-340-1997 | 焊条.高强度钢的手工电弧焊接用金属药皮焊条.分类(欧洲标准EN 757) | (Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification.) |
| NF A81-350-1997 | 焊条.非合金钢及细粒钢的有和无气体保护的金属电弧焊接用管状焊丝.分类(欧洲标准EN 758) | (Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non aloy and fine grain steels. Classification.) |
| NF A81-361-1999 | 焊接.填充材料(欧洲标准EN 1044) | (Brazing. Filler metals.) |
| NF A81-362-2002 | 焊接.软钎焊.钎焊.硬钎焊.软钎焊、钎焊及硬钎焊用焊料.分类、编码和验收试验 | (Welding, soldering, brasing, braze-welding - Filler metals for soldering, brazing and braze-welding - Classification, coding, acceptance testing.) |
| NF A81-369-1995 | 软钎焊、硬钎焊接和铜焊用填充金属.命名(欧洲标准EN ISO 3677) | (FILLER METAL FOR SOFT SOLDERING, BRAZING AND BRAZE WELDING. DESIGNATION. (EUROPEAN STANDARD EN ISO 3677).) |
| NF A81-410-1984 | 铝和铝合金.焊接、硬钎焊和钎焊.基础产品和焊条的选择 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING,BRAZING AND BRAZE WELDING. BASE MATERIALS AND SELECTION OF FILLER MATERIALS.) |
| NF A81-900-1973 | 铝和铝合金.焊接.焊剂的使用和检查 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. USE AND TESTING OF WELDING FLUXES.) |
| NF A82-001-1990 | 电阻焊接设备.电阻焊和类似技术用电焊机电气设备的安全规程 | (Safety requirements for the construction and the installation of equipment for resistance welding and allied processes.) |
| NF A82-020-1985 | 电阻焊接.电阻焊机.规范和试验 | (Electric resistance welding. Machines for electric resistance welding. Specifications and tests.) |
| NF A82-025-1986 | 电阻焊接.整流电流的电阻焊机.规范和试验 | (ELECTRIC RESISTANCE WELDING. MACHINES FOR ELECTRIC RESISTANCE WELDING WITH RECTIFIED CURRENT. SPECIFICATIONS AND TESTS.) |
| NF A82-030-1992 | 电阻焊接设备的图形符号 | (Graphical symbols for resistance welding equipment.) |
| NF A82-040-1985 | 电阻焊接.电阻焊机用变压器.适用于所有变压器的通用规范 | (Electric resistance welding. Transformers for resistance welding machines. General specifications applicable to all transformers.) |
| NF A82-041-1987 | 电阻焊接.汽车工业中多点焊接用的带分离式二次线组的变压器.特殊规范 | (Resistance welding. Transformers with two separate secondary windings for multispot welding as used in automobile industry. Particular specifications.) |
| NF A82-043-1996 | 电阻焊接.焊接枪用集成变压器 | (Electric resistance welding. Integrated transformers for welding guns.) |
| NF A82-045-1986 | 电阻焊接.电阻焊机用多组整流器.规范和试验 | (ELECTRIC RESISTANCE WELDING. RECTIFIER EQUIPMENT FOR RESISTANCE WELDING MACHINES. SPECIFICATIONS AND TESTS.) |
| NF A82-100-1987 | 电阻焊接.电阻焊接用电极材料及辅助设备 | (Electric resistance welding. Materials for resistance welding electrodes and ancillary equipments.) |
| NF A82-104-1-2000 | 电阻焊接设备.电极接头,外锥度1:10.第1部分:圆锥形接头,锥度1:10 | (Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1 : conical fixing, taper 1:10.) |
| NF A82-105-1985 | 电阻焊接.带电极帽、内锥度配合和凸头电极帽的直电阻点焊电极.尺寸和公差(锥度1/10) | (Electric resistance welding. Straight resistance spot welding electrodes with caps, male taper fits and male caps. Sizes and tolerances (taper 1/10).) |
| NF A82-108-1992 | 焊接滚轮坯料的尺寸 | (Dimensions of seam welding wheel blanks.) |
| NF A82-110-2001 | 电阻焊接设备.与水冷部分连接的二级连接电缆.尺寸和特性 | (Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics.) |
| NF A82-112-2-2002 | 电阻焊接水冷次级线圈连接电缆.第2部分:单根导线连接电缆的尺寸及要求 | (Water-cooled secondary connection cables for resistance welding - Part 2 : dimensions and requirements for single-conductor connection cables.) |
| NF A82-112-3-1996 | 电阻焊接水冷次级线圈连接电缆.第3部分:试验要求 | (WATER-COOLED SECONDARY CONNECTION CABLES FOR RESISTANCE WELDING. PART 3 : TEST REQUIREMENTS. (EUROPEAN STANDARD EN ISO 8205-3).) |
| NF A82-150-1987 | 电阻焊接多点焊接机用无外壳千斤顶.一般规范 | (Electric resistance welding. Pneumatic cylinders without liners for multiple spot welding machines. General specifications.) |
| NF A82-160-1987 | 电阻焊接.多点焊接机用无外壳千斤顶.尺寸 | (Electric resistance welding. Pneumatic cylinders without liners for multiple spot welding machines. Sizes.) |
| NF A82-199-1992 | 电阻焊接设备绝缘帽和套管 | (Insulation caps and bushes for resistance welding equipment.) |
| NF A82-740-1992 | 加厚焊接机台的槽 | (Slots in platens for projection welding machines.) |
| NF A83-011-1995 | 气焊设备.氧/燃料(切割机型)圆柱筒焊接.结构型式,一般规范,试验方法 | (Gas welding equipment. Oxygen/fuel blowpipes (cutting machine type) of cylindrical barrel. Type of construction, general specifications, test methods.) |
| NF A84-410-2003 | 气焊设备.焊接、切割和相关工艺中使用的压力计 | (Gas welding equipment - Pressure gauges used in welding, cutting and allied processes.) |
| NF A84-431-1999 | 气焊设备.焊接、切割和类似工艺用300巴以下的气瓶调压器 | (Gas welding equipment. Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar.) |
| NF A84-432-2003 | 气焊设备.焊接、切割和相关工艺的气瓶上用整体流量计式调节器.分类、规范和试验 | (Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests.) |
| NF A84-433-2001 | 气焊设备.小于等于300bar的焊接、切削及相关工艺用多头管系用压力调节器 | (Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar.) |
| NF A84-443-1999 | 气焊设备.焊接、切割和相关工艺的乙炔多功能系统.一般要求 | (GAS WELDING EQUIPMENT. ACETYLENE MANIFOLD SYSTEMS FOR WELDING, CUTTING AND ALLIED PROCESSES. GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14114).) |
| NF A84-444-2003 | 气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全要求 | (Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices.) |
| NF A84-530-1996 | 焊接、切割和加热用手动吹管.规范和试验 | (Manual blowpipes for welding, cutting and heating. Specifications and tests.) |
| NF A84-621-2002 | 气焊设备.焊接、切割和相关工艺用带截止阀的速动连接 | (Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.) |
| NF A84-622-1994 | 气焊设备.焊接设备,切割和连接技术用软管连接 | (Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes.) |
| NF A84-623-1996 | 气熔焊设备.焊接,切割和有关工艺管组件规范 | (Gas welding equipment. Specification for hose assemblies for equipment for welding, cutting and allied processes.) |
| NF A85-004-1988 | 电阻焊接及有关技术用的设备上用的图形符号与指示灯 | (EQUIPMENTS FOR ARC WELDING AND ALLIED PROCESSES. GRAPHICAL SYMBOLS TO BE USED ON EQUIPMENTS.) |
| NF A85-009-1-2000 | 电弧焊设备.第1部分:焊接电源 | (Arc welding equipment - Part 1 : welding power sources.) |
| NF A85-009-1/A1-2001 | 电弧焊设备.第1部分:焊接电源 | (Arc welding equipment - Part 1 : welding power sources.) |
| NF A85-600-1978 | 使用药皮焊条手工焊接用焊钳.安全规则.规范.类型试验 | (ELECTRODE HOLDER FOR MANUAL ARC WELDING WITH COATED ELECTRODES SAF-ETY RULES,SPECIFICATIONS AND TESTS.) |
| NF A85-610-1984 | 电弧焊接电缆的连接装置.安全规则.规范.类型试验 | (CONNECTORS FOR ARC WELDING CABLES. SAFETY RULES. REQUIREMENTS. TYPE TESTS. MARKING.) |
| NF A85-620-1986 | 电弧焊接.干燥箱和药皮焊条的储藏.规范和试验 | (ELECTRIC ARC WELDING. OVENS FOR THE DRYING AND STORAGE COVERED ELECTRODES. SPECIFICATIONS AND TESTS.) |
| NF A87-010-1973 | 铝和铝合金.焊接.边的准备 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. WELD PREPARATIONS.) |
| NF A87-012-2-2000 | 焊接.钢的基本焊接接合详图.第2部分:非内部压力器件 | (Welding - Basic weld joint details in steel - Part 2 : non internal pressurized components.) |
| NF A87-013-2-1999 | 焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊 | (WELDING AND ALLIED PROCESSES. JOINT PREPARATION. PART 2 : SUBMERGED ARC WELDING OF STEELS. (EUROPEAN STANDARD EN ISO 9692-2).) |
| NF A87-013-3-2001 | 焊接和相关工艺.接头预处理的推荐方法.第3部分:铝和铝合金的金属焊条惰性气体保护焊和钨极惰性气体保护焊 | (Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.) |
| NF A87-021-1998 | 焊接.弧双端螺栓焊接的双端螺栓和陶瓷箍.(欧洲标准EN ISO 13918) | (Welding. Studs and ceramic ferrules for arc stud welding.) |
| NF A88-112-1998 | 焊接操作人员.焊接操作人员用金属材料全机械化和自动焊接用熔焊和阻焊装置验收试验 | (Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials.) |
| NF A88-121-1994 | 焊接条件.任务和责任 | (WELDING COORDINATION. TASKS AND RESPONSIBILITIES. (EUROPEAN STANDARD EN 719).) |
| NF A88-200-1-2002 | 焊接和相关过程中的健康和安全.电弧焊接产生的烟尘和气体取样的实验室方法.第1部分:排放率测定和颗粒烟尘的 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1 : determination of emission rate and sampling for analysis of partic) |
| NF A88-200-2-2003 | 焊接和相关工艺中的卫生和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:除臭氧外气体的排放率测 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2 : determination of emission rates of gases, except ozone.) |
| NF A88-200-3-2003 | 焊接和相关工艺中的卫生和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第3部分:用固定点测量法测定臭氧 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3 : determination of ozone concentration using fixed point measurement) |
| NF A88-202-1-2001 | 焊接和有关工艺中的健康和安全.工作人员呼吸区空气粒子和气体的取样.第1部分:气体粒子的取样 | (Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1 : sampling of airborne particles.) |
| NF A88-202-2-2000 | 焊接和有关工艺中的健康和安全.工作人员工作区空气粒子和气体的取样.第2部分:气体取样 | (Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2 : sampling of gases.) |
| NF A88-230-1997 | 焊接和联接工艺过程中的健康和安全.弧焊工艺用透明焊接隔层,板条和屏蔽 | (Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes.) |
| NF A88-230/A1-2002 | 焊接及相关工艺的卫生和安全.弧焊用透明焊接防护罩、安全带和屏蔽物 | (Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes.) |
| NF A88-800-2003 | 塑料焊接人员.焊工资格检验.热塑焊接组件 | (Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies.) |
| NF A88-950-1-2002 | 水下焊接焊工资格检验。第１部分：高压湿焊的潜水焊工 | (Qualification testing of welders for under-water welding - Part 1 : diver-welders for hyperbaric wet welding.) |
| NF A88-950-2-2002 | 水下焊接焊工资格检验。第2部分：高压干焊的潜水焊工和焊接操作者 | (Qualification testing of welders for under-waster welding - Part 2 : diver-welders and welding operators for hyperbaric dry welding.) |
| NF A89-010-1-1992 | 金属材料焊接工艺与验收规范.第1部分:熔焊一般规则(欧洲标准EN 288-1) | (Specification and approval of welding procedures for metallic materials. Part 1 : general rules for fusion welding.) |
| NF A89-010-10-1996 | 金属材料焊接工艺的验收和规范.第10部分:电子束焊接工艺规范 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 10 : WELDING PROCEDURE SPECIFICATION FOR ELECTRON BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-10).) |
| NF A89-010-11-1996 | 金属材料焊接工艺的验收和规范.第11部分:激光束焊接工艺规范 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 11 : WELDING PROCEDURE SPECIFICATION FOR LASER BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-11).) |
| NF A89-010-2-1992 | 金属材料焊接工艺与验收规范.第2部分:电弧焊焊接程序规范(欧洲标准EN 288-2) | (Specification and approval of welding procedures for metallic materials. Part 2 : welding procedure specification for arc welding.) |
| NF A89-010-3-1992 | 金属材料焊接工艺的验收和规范.第3部分:钢件电弧焊焊接工艺试验(欧洲标准EN 288-3) | (Specification and approval of welding procedures for metallic materials. Part 3 : welding procedure tests for the arc welding of steels.) |
| NF A89-010-5-1994 | 金属材料焊接程序的规范和认可.第5部分:使用批准的电弧焊焊条进行认可 | (Specification and approval of welding procedures for metallic materials. Part 5 : approval by using approved welding consumables for arc welding.) |
| NF A89-010-6-1994 | 金属材料焊接程序的规范和认可.第6部分:有关以前试验的认可 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 6 : APPROVAL RELATED TO PREVIOUS EXPERIENCE. (EUROPEAN STANDARD EN 288-6).) |
| NF A89-010-7-1995 | 金属材料焊接程序的规范和认可.第七部分:使用电弧焊标准接程序进行认可 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 7 : APPROVAL BY A STANDARD WELDING PROCEDURE FOR ARC WELDING. (EUROPEAN STANDARD EN 288-7).) |
| NF A89-010-8-1995 | 金属材料焊接程序的规范和认可.第八部分:利用预生产焊接试验进行认可 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATEIRALS. PART 8 : APPROVAL BY A PRE-PRODUCTION WELDING TEST. (EUROPEAN STANDARD EN 288-8).) |
| NF A89-011-1986 | 煤气或蒸气用钢压力器.焊接操作方式的鉴定.固定在横木顶杆或拉杆.竖杆壁上的连接情况 | (STEEL VESSELS SUBJECT TO GAS OR STEAM PRESSURE. QUALIFICATION OF A WELDING PROCEDURE. APPLICATION TO THE WELDING OF TIE BARS,BRACES AND BOLTS ON TO A WALL.) |
| NF A89-052-2-2001 | 金属材料焊接程序的规范和合格评定.焊接程序规范.第2部分:气焊 | (Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2 : gas welding.) |
| NF A89-057-11-2002 | 金属材料焊接程序规范和鉴定.焊接程序试验.第11部分:电子和激光射线焊接 | (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11 : electron and laser beam welding.) |
| NF A89-057-8-2002 | 金属材料焊接程序规范和鉴定.焊接程序试验.第8部分:管对管-板接头的焊接 | (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8 : welding of tubes to tube-plate joints.) |
| NF A89-101-1-1998 | 焊接.金属材料焊接推荐.第1部分:电弧焊接的一般指南 | (WELDING. RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS. PART 1 : GENERAL GUIDANCE FOR ARC WELDING. (EUROPEAN STANDARD EN 1011-1).) |
| NF A89-101-1/A1-2002 | 焊接.金属材料焊接的推荐规范.第1部分:电弧焊接通用指南 | (Welding - Recommendations for welding of metallic materials - Part 1 : general guidance for arc welding.) |
| NF A89-101-2-2002 | 焊接.金属材料焊接的推荐规范.第2部分:铁素体钢的电弧焊 | (Welding - Recommendations for welding of metallic materials - Part 2 : arc welding of ferritic steel.) |
| NF A89-101-3-2000 | 焊接.金属材料焊接的推荐方法.第3部分:不锈钢的电弧焊 | (Welding - Recommendations for welding of metallic materials - Part 3 : arc welding of stainless steels.) |
| NF A89-101-4-2000 | 焊接.金属材料焊接的推荐方法.第4部分:铝和铝合金的电弧焊 | (Welding - Recommendations for welding of metallic materials - Part 4 : arc welding of aluminium and aluminium alloys.) |
| NF A89-101-5-2003 | 焊接.金属材料焊接的推荐方法.第5部分:包层钢焊接 | (Welding - Recommendations for welding of metallic materials - Part 5 : welding of clad steel.) |
| NF A89-204-2-1996 | 金属材料焊接的破坏试验.硬度试验.第2部分:焊接接缝的微硬度试验(欧洲标准EN 1043-2) | (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. HARDNESS TEST. PART 2 : MICRO HARDNESS TESTING ON WELDED JOINTS. (EUROPEAN STANDARD EN 1043-2).) |
| NF A89-206-1987 | 电阻焊.点焊与凸焊.焊接点用扭转剪切试件 | (Welding and allied techniques. Resistance spot, projection and seam welded lap joints. Tension shear tests.) |
| NF A89-207-2000 | 焊接.在奥氏体和双重铁素体奥氏体铬镍不锈钢焊接金属中铁素体数目的测定 | (Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals.) |
| NF A89-208-1987 | 焊接和有关技术.点焊,凸焊或缝焊搭接接头 | (WELDING AND ALLIED TECHNIQUES. SPOT,PROJECTION OR SEAM WELDED LAP JOINTS.) |
| NF A89-210-1996 | 金属材料焊接的破坏试验.断裂试验.(欧洲标准EN 1320) | (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. FRACTURE TEST. (EUROPEAN STANDARD EN 1320).) |
| NF A89-211-1996 | 金属材料焊接的破坏试验.焊接的低倍及显微检验(欧洲标准EN 1321) | (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS. (EUROPEAN STANDARD EN 1321).) |
| NF A89-220-1973 | 铝和铝合金.焊接.分类和焊接点的检验 | (ALUMINIUM AND ALLOY THEREOF. WELDING. CLASSIFICATION AND TESTING OF WELDED JOINTS.) |
| NF A89-231-1992 | 钢的弧焊接头.质量缺陷等级导则 | (ARC-WELDED JOINTS IN STEEL. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 25817).) |
| NF A89-232-1994 | 铝和可焊合金的弧焊接头.质量缺陷等级导则 | (ARC-WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 30042).) |
| NF A89-233-1996 | 焊接.电子束和激光束焊接接头.缺陷的质量级别导则.第1部分:钢 | (WELDING. ELECTRONS AND LASER BEAM WELDED JOINTS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. PART 1 : STEEL. (EUROPEAN STANDARD EN ISO 13919-1).) |
| NF A89-234-2001 | 焊接.电子和激光束焊接接头.缺陷的质量级别导则.第1部分:铝及其可焊合金 | (Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.) |
| NF A89-240-1987 | 焊接和有关技术.电阻点焊、凸焊或缝焊搭接接头.带解释的缺陷分类 | (WELDING AND ALLIED PROCESSES. RESISTANCE SPOT,PROJECTION AND SEAM WELDED LAP JOINTS. CLASSIFICATION OF DEFECTS WITH EXPLANATORY COMMENTS.) |
| NF A89-250-1-1994 | 焊接的质量要求.金属材料的熔焊.第1部分:选择和使用导则 | (Quality requirements for welding. Fusion welding of metallic materials. Part 1 : guidelines for selection and use.) |
| NF A89-250-2-1994 | 焊接的质量要求.金属材料的熔焊.第2部分:全面质量系统 | (Quality requirements for welding. Fusion welding of metallic materials. Part 2 : comprehensive quality requirements.) |
| NF A89-250-3-1994 | 焊接的质量要求.金属材料的熔焊.第3部分:标准质量要求 | (Quality requirements for welding. Fusion welding of metallic materials. Part 3 : standard quality requirements.) |
| NF A89-250-4-1994 | 焊接的质量要求.金属材料的熔焊.第4部分:基本质量要求 | (Quality requirements for welding. Fusion welding of metallic materials. Part 4 : elementary quality requirements.) |
| NF A89-253-1996 | 焊接.预热温度、层间温度和预加热的维持温度测量导则 | (Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature.) |
| NF A89-300-1996 | 焊接.焊接结构的通用公差.长度和角度尺寸.形状和位置 | (WELDING. GENERAL TOLERANCES FOR WELDED CONSTRUCTIONS. DIMENSIONS FOR LENGTHS AND ANGLES. SHAPE AND POSITION. (EUROPEAN STANDARD EN ISO 13920).) |
| NF A89-310-1973 | 铝和铝合金.焊接.基本元件的连接.选择原则 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. ELEMENTARY TYPES OF ASSEHBLY. SELECTION CRITERIA.) |
| NF A89-420-2000 | 钎焊.钎焊接点的无损试验 | (Brazing - Destructive tests of brazed joints.) |
| NF A89-430-2000 | 钎焊.钎焊接头的无损检验 | (Brazing - Non-destructive examination of brazed joints.) |
| NF A89-500/A1-2003 | 焊接无损检验.金属材料的一般规则 | (Non-destructive examination of welds - General rules for metallic materials.) |
| NF A89-510-1997 | 焊缝的无损检验.焊接接头的X射线照相检验 | (Non-destructive examination of welds. Radiographic examination of welded joints.) |
| NF A89-510/A1-2003 | 焊接无损检验.焊接接头射线照相检验 | (Non-destructive examination of welds - Radiographic examination of welded joints.) |
| NF A89-511-1998 | 焊缝的无损检验.焊接接头的X射线照相检验.验收等级 | (Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance levels.) |
| NF A89-511/A1-2003 | 焊缝的无损检验.焊接接头的X射线照相检验.验收水平 | (Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels.) |
| NF A89-520-1997 | 焊缝的无损检验.焊接接头的超声波检验 | (Non destructive examination of welds. Ultrasonic examination of welded joints.) |
| NF A89-520/A1-2002 | 焊缝的无损检验.焊接接头的超声波检验 | (Non-destructive testing of welds - Ultrasonic testing of welded joints.) |
| NF A89-521-1997 | 焊缝的无损检验.焊接接头的超声波检验.验收等级 | (Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.) |
| NF A89-521/A1-2002 | 焊缝的无损检验.焊接接头的超声波检验.验收等级 | (Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels.) |
| NF A89-565-1987 | 焊接和相关工艺.电阻点焊和缝焊接缝的放射线检查.推荐实施规范 | (Welding and allied processes. Radiographic testing of resistance spot and seam welded joints. Recommended practice.) |
| NF A89-567-2001 | 电阻点焊、滚焊和浮凸焊接机械剥离试验的程序和样品尺寸 | (Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds.) |
| NF A89-569-2001 | 电阻点焊和浮凸焊接十字形拉力试验的程序和样品尺寸 | (Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds.) |
| NF A89-574-2003 | 金属材料焊接的无损检验.电阻焊接.电阻缝焊的压力试验 | (Destructive test on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds.) |
| NF A89-575-2003 | 金属材料焊接的无损检验.测量δ铁素体用的取样方法 | (Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.) |
| NF A89-600-1998 | 焊接.金属材料的弧双端螺栓焊接(欧洲标准EN ISO 14555) | (WELDING. ARC STUD WELDING OF METALLIC MATERIALS. (EUROPEAN STANDARD EN ISO 14555).) |
| NF A89-601-2001 | 焊接.金属材料的摩擦焊接 | (Welding - Friction welding of metallic materials.) |
| NF A89-700-1-2000 | 焊接.电子束焊接机的认可检验.第1部分:原则和认可条件 | (Welding - Acceptance inspection of electron beam welding machines - Part 1 : principles and acceptance conditions.) |
| NF A89-700-2-2000 | 焊接.电子束焊接机的认可检验.第2部分:加速电压特性的测量 | (Welding - Acceptance inspection of electron beam welding machines - Part 2 : measurement of accelerating voltage characteristics.) |
| NF A89-700-3-2000 | 焊接.电子束焊接机的认可检验.第3部分:电子束电流特性的测量 | (Welding - Acceptance inspection of electron beam welding machines - Part 3 : measurement of beam current characteristics.) |
| NF A89-700-4-2000 | 焊接.电子束焊接机的认可检验.第4部分:焊接速度的测量 | (Welding - Acceptance inspection of electron beam welding machines - Part 4 : measurement of welding speed.) |
| NF A89-700-5-2000 | 焊接.电子束焊接机的认可检验.第5部分:电子束放出精确度的测量 | (Welding - Acceptance inspection of electron beam welding machines - Part 5 : measurement of run-out accuracy.) |
| NF A89-700-6-2000 | 焊接.电子束焊接机的认可检验.第6部分:焊点位稳定性的测量 | (Welding - Acceptance inspection of electron beam welding machines - Part 6 : measurement of stabilitry of spot position.) |
| NF A89-701-1-2003 | CO2激光切割、焊接机的验收试验.第1部分:通用原理和验收条件 | (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 1 : general principles, acceptance conditions.) |
| NF A89-701-2-2003 | CO2激光切割、焊接机的验收试验.第2部分:静态和动态准确度的测定 | (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 2 : measurement of static and dynamic accuracy.) |
| NF A89-701-3-2003 | CO2激光切割、焊接机的验收试验.第3部分:气体流量和压力测量仪的校准 | (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 3 : calibration of instruments for measurement of gas flow and pressure.) |
| NF A89-750-1-2003 | 焊接.与焊接和相关工艺有关的底漆的试验.第1部分:一般要求 | (Welding - Test for shop primers in relation to welding and allied processes - Part 1 : general requirements.) |
| NF A89-750-2-2003 | 焊接.与焊接和相关工艺有关的底漆的试验.第2部分:底漆的焊接特性 | (Welding - Test for shop primers in relation to welding and allied processes - Part 2 : welding properties of shop primers.) |
| NF A89-750-3-2003 | 焊接.与焊接和相关工艺有关的底漆的试验.第3部分:热切割 | (Welding - Test for shop primers in relation to welding and allied processes - Part 3 : thermal cutting.) |
| NF A89-750-4-2003 | 焊接.与焊接和相关工艺有关的底漆的试验.第4部分:烟气排放 | (Welding - Test for shop primers in relation to welding and allied processes - Part 4 : emission of fumes and gases.) |
| NF A89-810-1-1999 | 热塑性半成品的焊接接头试验.第1部分:弯曲试验. | (Testing of welded joints of thermoplastics semi-finished products - Part 1 : bend test.) |
| NF A89-810-3-2000 | 热塑性半成品的焊接接头试验.第3部分:拉伸蠕变试验. | (Testing of welded joints of thermoplastics semi-finished products - Part 3 : tensile creep test.) |
| NF A89-810-4-2002 | 热塑性半成品的焊接接头试验.第4部分:剥离试验 | (Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test.) |
| NF A89-810-5-2000 | 热塑半成品焊接接头的试验.第5部分:宏观检验 | (Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination.) |
| NF A89-810-7-2003 | 热塑性半成品焊接接头的试验.第7部分:腰形试验样品的抗拉试验 | (Testing of welded joints of thermoplastics semi-finished products - Part 7 : tensile test with waisted test specimens.) |
| NF A89-810-8-2002 | 热塑性半成品的焊接接头试验.第8部分:要求 | (Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.) |
| NF A92-118-1993 | 搪瓷.搪瓷器皿耐碰撞测定.焊接工具试验 | (VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF THE RESISTANCE OF ENAMELLED ARTICLES TO IMPACT. PISTOL TEST.) |
| NF C20-758-1990 | 环境试验.试验方法.TD试验可钎焊性敷镀金属抗溶性和表面元件抗焊接热强度测定 | (Environmental testing. Test methods. Test Td : solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (smd).) |
| NF C31-652-2001 | 特种绕组线规范.第2部分:带粘合层的可焊接的聚氨基甲酸乙酯漆包圆铜绕组线,130级 | (Specifications for particular types of winding wires - Part 2 : solderable polyurethane enamelled round copper wire, class 130, with a bonding layer.) |
| NF C31-654-2001 | 特种绕组线规范.第4部分:可焊接的聚氨基甲酸乙酯漆包圆铜绕组线130级 | (Specifications for particular types of winding wires - Part 4 : solderable polyurethane enamelled round copper wire, class 130.) |
| NF C31-669-2001 | 特种绕组线规范.第19部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜绕组线,130级 | (Specifications for particular types of winding wires - Part 19 : solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130.) |
| NF C31-671-2001 | 特种绕组线规范.第21部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜绕组线,155级 | (Specifications for particular types of winding wires - Part 21 : solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155.) |
| NF C31-673-1995 | 特种绕组线规范.第23部分:可焊接的聚酰胺酯漆包圆铜绕组线,180级 | (Specifications for particular types of winding wires. Part 23 : solderable polyesterimide enamelled round copper wire, class 180.) |
| NF C31-673/A1-2002 | 特种绕组线规范.第23部分:180类可焊接聚氨亚胺漆包圆铜线 | (Specifications for particular types of winding wires - Part 23 : solderable polyesterimide enamelled round copper wire, class 180.) |
| NF C31-685-2001 | 特种绕组线规范.第35部分:155级带粘结层的可焊接聚氨酯漆包圆铜线 | (Specifications for particular types of winding wires - Part 35 : solderable polyurethane enamelled round copper wire, class 155, with a bonding layer.) |
| NF C31-686-2001 | 特种绕组线规范.第36部分:有粘结层的可焊接聚酰胺酯漆包圆铜绕组线.180级 | (Specifications for particular types of winding wires - Part 36 : solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer.) |
| NF C31-701-2002 | 特种绕组线规范.第51部分:可焊接聚亚胺酯漆包圆铜线 | (Specifications for particular types of winding wires - Part 51 : solderable polyurethane enamelled round copper wire, class 180.) |
| NF C46-512-1999 | 工业处理控制阀.第3-3部分:尺寸.对焊接的头尾相接尺寸.两接头球型直接式控制阀(欧洲标准EN 60534-3-3) | (Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.) |
| NF C64-452-1992 | 充气高压开关和控制设备用锻铝和铸铝合金焊接复合外壳 | (Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear.) |
| NF C64-4521-1993 | 充气高压开关和控制设备用锻铝和铸铝合金焊接复合外壳.补充件1 | () |
| NF C90-700-1-3-2002 | 电子组件用连接材料.第1-3部分:电子焊接用电子级钎焊合金及有焊剂和无焊剂的固体焊料的要求 | (Attachment materials for electronic assembly - Part 1-3 : requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications.) |
| NF C90-703-1999 | 印刷电路板组件.第1部分:总规范.使用表面安装和相关装配技术的焊接电气和电子组件的要求 | (Printed board assemblies - Part 1 : generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies.) |
| NF C90-704-2000 | 印刷电路板组件.第2部分:分规范.表面安装焊接组件的要求 | (Printed board assemblies - Part 2 : sectional specification - Requirements for surface mount soldered assemblies.) |
| NF C90-705-2000 | 印刷电路板组件.第3部分:分规范.通孔安装焊接组件的要求 | (Printed board assemblies - Part 3 : sectional specification - Requirements for through-hole mount soldered assemblies.) |
| NF C90-706-1999 | 印刷电路板组件.第4部分:分规范.端点焊接组件的要求 | (Printed board assemblies - Part 4 : sectional specification - Requirements for terminal soldered assemblies.) |
| NF C91-199-1997 | 电磁兼容性(EMC).第199部分:电弧焊接设备用产品标准 | (Electromagnetic compatibility (EMC). Product standard of arc welding equipment.) |
| NF C93-023-1998 | 无缝焊接.第2部分:无缝焊接卷边连接.一般要求.试验方法和特殊指南 | (SOLDERLESS CONNECTIONS. PART 2 : SOLDERLESS CRIMPED CONNECTIONS. GENERAL REQUIREMENTS, TEST METHODS AND PRATICAL GUIDANCE. (EUROPEAN STANDARD EN 60 352-2).) |
| NF C93-400-12-6-1997 | 电子设备用机电元件.基本试验过程和测量方法.第12部分:焊接试验.第6节:试验12f:防熔密封和机械焊接中的清洗 | (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 12 : soldering tests. Section 6 : test 12f : sealing against flux and cleaning solvents in machine soldering.) |
| NF C93-406-4-107-2002 | 电子设备用连接器.第4-107部分:经质量评定的印制板连接器.固定部分有印制板用焊接和压入端子、活动部分有不 | () |
| NF C93-472-6-1997 | 电子设备的电机元件.基本试验过程和测量方法.第12部分:焊接试验.第6节:试验12F:机械焊接过程中对液体和清洁 | (ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 12 : SOLDERING TESTS. SECTION 6 : TEST 12F : SEALING AGAINST FLUX AND CLEANING SOLVENTS IN MACHINE SOLDERING. (EUROPEAN STANDARD EN 60 512-12-6).) |
| NF C93-474-20-1997 | 电子设备用机电元件.基本试验规程和测量方法.第16部分:触点和终端机械试验.第20节:第15次试验:机械强度(无 | () |
| NF E25-140-1994 | 紧固件.电弧焊接双端螺栓.符号SA.尺寸和物理化学特性.拉制电弧焊接螺栓系统 | (FASTENERS. ARC WELDING STUDS LOADING. SYMBOL SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL. DRAWN ARC STUD WELDING SYSTEM.) |
| NF E25-418-1991 | 电阻焊接用六角形螺母.符号HSR紧固件 | (FASTENERS. RESISTANCE WELDING HEXAGON NUTS. SYMBOL H SR.) |
| NF E26-010-1981 | 提升设备用焊接短环链和特短环链校准负载链条 | (Welded short-link and very short-link calibrated loading chains used for lifting appliances.) |
| NF E26-011-1981 | 焊接短链校准或未校准负载链条 | (Welded short-link calibrated or non-calibrated loading chains.) |
| NF E26-012-1981 | 链焊接长环校准和未校准负载链 | (WELDED LONG-LINK CALIBRATED OR NON-CALIBRATED LOADING CHAINS.) |
| NF E26-020-1975 | 未校准未试验过的焊接圆钢环链 | (Welded link chain round steel non calibrated non tested.) |
| NF E27-801-1970 | 焊接杆 | (WELD ROD WITH SCREWED END.) |
| NF E29-032-1985 | 工业管道.钢制构件.对焊接头.准备 | (Industrial pipework. Steel components. Butt welding ends. Preparation.) |
| NF E29-251-1972 | 工业管道.不锈钢制焊接冲压凸缘（薄型系列）.公称压力１０ | (STAMPED STAINLESS-STEEL FILLETS FOR WELDING (THIN SERIES) PN 10) |
| NF E29-305-1999 | 工业阀门.钢阀门对缝焊接末端.(欧洲标准EN 12627) | (INDUSTRIAL VALVES. BUTT WELDING ENDS FOR STEEL VALVES. (EUROPEAN STANDARD EN 12627).) |
| NF E29-591-1-1998 | 铜和铜合金.管道配件.第1部分:铜管毛细管终端焊接配件 | (Copper and copper alloys. Plumbing fittings. Part 1 : fittings with ends for capillary soldering or capillary brazing to copper tubes.) |
| NF E29-600-1987 | 工业管道.钢制连接管和螺塞.插接式焊接连接管.螺纹连接管和螺塞 | (Industrial pipework. Steel fittings and plugs. Socket welding fittings.) |
| NF E29-736-1-2003 | 可运输的气瓶.可再充气的焊接钢气瓶.设计和制造.第1部分:碳钢 | (Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1 : carbon steel.) |
| NF E29-736-2-2003 | 可运输的气瓶.可再充气的焊接钢气瓶.设计和制造.第2部分:不锈钢 | (Transportable gas cylinders - Reffilable welded steel gas cylinders - Design and construction - Part 2 : stainless steel.) |
| NF E29-745-2000 | 便携式气瓶.可再充气的便携式焊接铝合金气瓶的设计和结构规范 | (Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders.) |
| NF E48-064-4-2000 | 液压动力和一般应用的金属管连接.第4部分:由O型环焊接的24芯连接 | (Metallic tube connections for fluid power and general use - Part 4 : 24 o cone connectors with O-ring weld-on nipples.) |
| NF E84-007-1998 | 栅栏用钢线和线制品.第4部分:钢线焊接网眼栅栏 | (Steel wire and wire products for fences. Part 4 : steel wire welded mesh fencing.) |
| NF E84-010-2003 | 围栏用钢丝和钢丝制品.第7部分:围栏用钢丝焊接成的栅栏 | (Steel wire and wire products for fences - Part 7 : steel wire welded panels for fencing.) |
| NF E86-050-1983 | 工业设备部件.机械焊接组件.通用公差 | (INDUSTRIAL INSTALLATIONS. MECHANICALLY WELDED UNITS. GENERAL TOLERANCES.) |
| NF E86-253-1975 | 直径２０m以下立式圆筒形焊接贮槽.制造技术条件 | (CYLINDRICAL WELDED STORAGE TANKS WITH VERTICAL AXIS UP TO 20 M IN DIAMETER TECHNICAL CONDITIONS OF CONSTRUCTION.) |
| NF E86-256-1979 | 工业设备.焊接贮槽.一般特性 | (INDUSTRIAL PLANTS. WELDED TANKS. GENERAL REQUIREMENTS.) |
| NF E86-330-1978 | 卧式锅炉设备.焊接支架 | (HORIZONTAL CYLINDRICAL TANKS. WELDING SUPPORTS.) |
| NF F01-810-1990 | 铁路车辆.非合金钢或低合金钢电弧焊和电阻焊接头.设计与施工规则 | (RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES FOR CONCEPTION AND REALIZATION.) |
| NF F01-812-1-1990 | 铁路车辆.钢的电弧和电阻焊接接头.第1部分:对接焊和角接接头中缺陷验收准则 | (RAILWAY ROLLING STOCK. ART AND RESISTANCE WELDED JOINTS OF STEELS. PART 1 : ACCEPTANCE CRITERIA FOR DEFECTS IN WELDED BUTT AND CORNER JOINTS.) |
| NF F01-812-2-1992 | 铁路滚动器材.钢的弧焊和电阻焊接.第2部分:电阻焊接缺陷的验收标准 | (RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF STEELS. PART 2 : ACCEPTANCE CRITERIA FOR DEFECTS IN ELECTRIC RESISTANCE WELDED JOINTS.) |
| NF F01-820-1992 | 铁路车辆.车身用铝合金焊接接头(焊缝) | (RAILWAY ROLLING STOCK. WELDED JOINTS OF PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK. CHARACTERIZATION.) |
| NF F18-001-1988 | 铁路车辆.锰钢磨损板.特性.焊接规定 | (ROLLING STOCK. WEARING PLATES MADE OF MANGANESES STEEL. CHARACTERISTICS. WELDING PRESCRIPTIONS.) |
| NF F19-351-1996 | 铁路车辆.连续涂覆焊接钢 | (RAILWAY ROLLING STOCK. CONTINUOUSLY WELDABLE PRIMER COATED SHEET STEEL.) |
| NF F50-105-1992 | 铁路固定设备.钢轨铝热剂焊接.工作特性和验收 | (RAILWAY FIXED EQUIPMENT. THERMIT WELDING OF RAILS. WELDS PERFORMED BY COMPAGNIES. PERFORMANCE AND ACCEPTANCE CONDITONS OF WORKS.) |
| NF F50-106-1991 | 铁路固定设备.钢轨的热焊接.过程验收 | (RAILWAY FIXED EQUIPMENT. THERMIT WELDING OF RAILS. APPROVAL OF A PROCESS.) |
| NF F82-001-1990 | 铁路车辆.车体框架用的可焊接铝合金线材 | (RAILWAY ROLLING STOCK. EXTRUDED WELDABLE PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK.) |
| NF J22-860-1993 | 造船工业.带钢管法兰的焊接舱壁件.PN6.PN10.PN16.PN20 | (Shipbuilding. Welded bulkhead pieces with flanges for steel pipework. Pn 6, PN10, PN 16, PN 20.) |
| NF J31-434-1948 | 造船工业.平甲板舱盖用螺旋松紧扣.带压紧垫片的焊接销 | (SHIPBUILDING. LOCKING HANDLES FOR ROUND FLAT HATCH COVERS. WELDED BOLT WITH PACKING.) |
| NF L06-380-10-2003 | 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第10部分:一般要求 | (Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 10 : general requirements.) |
| NF L06-380-20-2003 | 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第20部分:均质铝及铝合金组件 | (Aerospace series - Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 20 : homogeneous assemblies aluminium and aluminium al) |
| NF L06-380-21-2003 | 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.第21部分:均质非合金及低合金钢组 | (Aerospace series - Welded and brazed assemblies for aerospace construction - Weldability and beazability of materials - Part 21 : homgeneous assemblies of unalloyed and low alloy steels.) |
| NF L06-383-1987 | 航空和航天制造用焊作和钎焊件.点焊和滚轮焊的电阻焊接件.焊件质量 | (Welded and brazed assemblies for aerospace constructions. Resistance spot or seam welded assemblies. Quality of welded assemblies.) |
| NF L06-384-1988 | 航天工业构件用焊接和钎焊组件.摩擦焊接组件.焊接组件的质量 | (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. FRICTION WELDED ASSEMBLIES. QUALITY OF WELDED ASSEMBLIES.) |
| NF L06-385-1987 | 航空和航天制造用焊件和钎焊件.点焊和滚轮焊接机器.规范和分类的 | (Welded and brazed assemblies for aerospace constructions. Resistance spot or seam welding machines. Qualification specifications.) |
| NF L06-386-1988 | 航天工业用焊接和钎焊组件.摩擦焊接机.合格规范 | (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. FRICTION WELDING MACHINES. QUALIFICATION SPECIFICATIONS.) |
| NF L06-387-1991 | 航天结构用焊接和钎焊组装件.用电子束焊接金属材料组装件 | (Weldments and brazements for aerospace structures. Joints of metallic materials by electron beam welding. Quality of weldments.) |
| NF L06-388-1991 | 航天结构用焊接和钎焊组装件.电子束焊接机.鉴定规程 | (Welded and brazed assemblies for aerospace constructions. Electron beam welding machine. Qualification specifications.) |
| NF L06-391-1994 | 航天结构用焊接和钎焊组装件.用扩散焊接法安装金属材料组装件.焊接组装件的质量 | (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION. ASSEMBLY OF METALLIC MATERIALS CARRIED OUT BY DIFFUSION WELDING. QUALITY OF WELDED ASSEMBLIES.) |
| NF L06-393-1995 | 航空和航天工业.航天结构用焊接和钎焊组装件.根据T.I.G进行加工处理的焊接机械.合格规范 | (AIRCRAFT INDUSTRIE. WELDED AND SOLDERED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. WELDING MACHINE ACCORDING TO T.I.G. PROCESS. SPECIFICATION FOR QUALIFICATION.) |
| NF L06-394-1999 | 飞行器工业.航空与航天结构的焊接和钎焊. 用TIG方法的金属材料焊接组件.焊接质量 | (AIRCRAFT INDUSTRIE. WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES. ASSEMBLY OF METALLIC MATERIALS WELDED BY TIG METHOD. QUALITY OF WELDMENTS.) |
| NF L07-158-1990 | 航天系列.焊接.图纸上的数据 | (AEROSPACE SERIES. WELDS. INFORMATION ON DRAWINGS. (EUROPEAN STANDARD EN 2574).) |
| NF L12-811-2001 | 航空航天系列.钢焊接用焊棒和焊丝.直径0.5mm≥D≥5.0mm.尺寸 | (Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm inferior or equal D inferior or equal 5,0 mm - Dimensions.) |
| NF L12-812-2002 | 航空航天系列.耐热合金焊接用填充杆材和填充金属丝.直径≥0.5mm 或者≤5.0mm .尺寸 | (Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.) |
| NF L13-200-2001 | 航空航天系列.耐热合金NI-WH1801(NICR20Co18Ti3Al2).焊接用填充金属 | (Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding.) |
| NF L13-201-2001 | 航空航天系列.耐热合金NI-WH2301(NICR22Fe19Mo9Co2).焊接用填充金属 | (Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding.) |
| NF L13-203-2001 | 航空航天系列.耐热合金NI-WH3601(NICR22Mo9Nb4).焊接用填充金属 | (Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding.) |
| NF L13-204-2001 | 航空航天系列.热阻合金NI-WH1303 (NiCo20Cr20Mo5Ti2Al).焊接用金属焊料 | (Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding.) |
| NF L13-205-2001 | 航空航天系列.耐热合金CO-WH4101(CoCr20W15Ni).焊接用填充金属 | (Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding.) |
| NF L13-206-2001 | 航空航天系列.耐热合金CO-WH1402(CoCr22Ni22W15).焊接用填充金属 | (Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding.) |
| NF L13-207-2002 | 航空航天系列.钢FE-WM3801(X5CrNiCu17-4).焊接用填充金属 | (Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding.) |
| NF L13-208-2002 | 航空航天系列.钢FE-WM1502(X11CrNiMoVN12-3).焊接用填充金属 | (Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding.) |
| NF L13-209-2001 | 航空航天系列.钛合金TI-W640001.焊接用填充金属 | (Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding.) |
| NF L13-210-2002 | 航空航天系列.钛合金TI-W19001.焊接用填充金属 | (Aerospace series - Titanium alloy TI-W19001- Filler metal for welding.) |
| NF L13-211-2001 | 航空航天系列.耐热合金NI-WD3201(NiMo25Fe6Cr5).焊接用填充金属 | (Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding.) |
| NF L13-212-2001 | 航空航天系列.耐热合金NI-WH3901(NiCr16Mo15).焊接用填充金属 | (Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding.) |
| NF L13-213-2002 | 航空航天系列.钢FE-WM1501 (X13CrNiMoCo12-3-2-2). 焊接用填充金属 | (Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding.) |
| NF L13-214-2002 | 航空航天系列.钢FE-WA4801(X6CrNiMnNb18-10).焊接用填充金属 | (Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding.) |
| NF L13-215-2002 | 航空航天系列.铝合金AL-W42201.焊接用填充金属.焊条 | (Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod.) |
| NF L13-216-2001 | 航空航天系列.耐热合金NI-WH1302(NICR20Co13Mo4Ti3Al).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod.) |
| NF L13-217-2001 | 航空航天系列.耐热合金CO-WH4102(CoCr28W20Ni5V1).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod.) |
| NF L13-218-2001 | 航空航天系列.耐热合金CO-WH1401(CoCr26Ni11W8).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod.) |
| NF L13-219-2002 | 航空航天系列.钢FE-WM1601 (X18CrWNi13-3-2).焊接填充金属.线材和棒材 | (Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod.) |
| NF L13-220-2001 | 航空航天系列.耐热合金NI-WH0001 (NiCr20).焊接用填充金属.焊丝和焊棒 | (Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod.) |
| NF L13-221-2002 | 航空航天系列.钢FE-WA4802 (X8CrNiMn27-22-2).焊接填充金属.线材和棒材 | (Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod.) |
| NF L13-222-2002 | 航空航天系列.钢FE-WL1804 (25CrMnMo4-2-2).焊接填充金属.线材和棒材 | (Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod.) |
| NF L13-223-2002 | 航空航天系列.钢FE-WL1805 (8CrMnMo12-4-9).焊接填充金属.线材和棒材 | (Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod.) |
| NF L13-224-2002 | 航空航天系列.钢 FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2).焊接填充金属.线材和棒材 | (Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod.) |
| NF L13-225-2002 | 航空航天系列.钢FE-WL1806 (15CrMnMoV5-4-9-3). 焊接用填充金属.焊丝和焊条 | (Aerospace series - Acier FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod.) |
| NF L13-226-2002 | 航空航天系列.钢FE-WA2602 (X4NiCrTiMoV26-15). 焊接用填充金属.焊丝和焊条 | (Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod.) |
| NF L13-227-2002 | 航空航天系列.钢FE-WA3801 (X4CrNiMn20-10-2). 焊接用填充金属.焊丝和焊条 | (Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod.) |
| NF L13-228-2001 | 航空航天系列.耐热合金NI-WH8901(NICR16Ti3Mn2).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding - Wire and rod.) |
| NF L13-229-2001 | 航空航天系列.耐热合金NI-WH3902 (NICR25Mo10C).焊接用填充金属.焊丝和焊棒 | (Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod.) |
| NF L13-230-2001 | 航空航天系列.耐热合金CO-WH4001(CoCr29W9).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod.) |
| NF L13-231-2002 | 航空航天系列.镁合金钢MG-W68001. 焊接用填充金属.焊丝和焊条 | (Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod.) |
| NF L13-232-2001 | 航空航天系列.铝合金AL-W46431.焊接用填充金属.金属丝和金属杆 | (Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod.) |
| NF L13-233-2001 | 航空航天系列.钛TI-W99001.焊接用填充金属.金属丝和金属杆 | (Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod.) |
| NF L13-234-2002 | 航空航天系列.钢FE-WM1001 (X13Cr12). 焊接用填充金属.焊丝和焊条 | (Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod.) |
| NF L13-235-2001 | 航空航天系列.钢FE-WM1002(X13Cr13).焊接用填充金属.金属丝和金属杆 | (Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod.) |
| NF L15-811-2002 | 航空航天系列.焊接钛和钛合金用填充杆和填充焊丝.直径 D≥0.5mm 和D≤5.0mm .尺寸 | (Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameters D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.) |
| NF L43-353-2002 | 航空航天系列.管联接器8°30'.金属包头焊接用动态梁密封端.几何构型 | (Aerospace series - Pipe coupling 8 o30' - Dynamic beam seal end for ferrule, welded - Geometric configuration.) |
| NF L43-354-2002 | 航空航天系列.管联接器8°30'.焊接的联接器端部.几何构型 | (Aerospace series - Pipe coupling - Coupling ends, welded - Geometric configuration.) |
| NF L43-361-2002 | 航空航天系列. 8°30'钛合金管连接件.带动态梁密封端的焊接卡套 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Ferrules, welded, with dynamic beam seal end.) |
| NF L43-372-2002 | 航空航天系列.8°30'钛合金管联接件.90°弯头焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o welded end.) |
| NF L43-373-2002 | 航空航天系列.8°30'钛合金管联接件.带推进线螺母的90°弯头焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, welded end with thrust wire nut.) |
| NF L43-375-2002 | 航空航天系列.8°30'钛合金管联接件.隔离直通90°弯头焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, bulkhead, welded end.) |
| NF L43-377-2002 | 航空航天系列. 8°30'钛合金管联接件.带推进线螺母的45°焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded end with thrust wire nut.) |
| NF L43-385-2002 | 航空航天系列.8°30'钛合金管联接件.焊接卡套用螺母 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Nut for welded ferrule.) |
| NF L43-388-2002 | 航空航天系列.8°30'钛合金管联接件.带动态粱密封端的端部焊接减径的卡套 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end.) |
| NF L43-391-2002 | 航空航天系列.8°30'钛合金管联接件. 长型隔壁直通接头焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long, welded end.) |
| NF L43-393-2002 | 航空航天系列.钛合金管联接器8°30'.弯管90度焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o welded ends.) |
| NF L43-394-2002 | 航空航天系列.钛合金管联接器8°30'.弯管45度焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded ends.) |
| NF L43-398-2002 | 航空航天系列.8°30'钛合金管联接件.长焊接端的90°弯头隔壁直通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o bulkhead, welded end long.) |
| NF L43-406-2002 | 航空航天系列.钛合金管联接器8°30'.检修用带动态梁密封端的焊接金属包头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair.) |
| NF L43-407-2002 | 航空航天系列.钛合金管联接器8°30'.检修用焊接端部的闷头管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead welded end, for repair.) |
| NF L43-408-2002 | 航空航天系列.钛合金管联接器8°30'.检修用长的焊接端部的闷头管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead long welded end, for repair.) |
| NF L43-409-2002 | 航空航天系列.钛合金管联接器8°30'.检修用焊接端加螺纹的管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded end threaded for repair.) |
| NF L43-613-2003 | 航空航天系列.耐热钢或耐热镍合金管连接件.焊接连接端.设计构型.英制 | (Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series.) |
| NF L43-619-2003 | 航空航天系列.耐热钢制37度管接头.焊接端直通接管头.英制 | (Aerospace series - Pipe couplings, 37 o, spherical, in heat resisting steel - Straight nipples, welded end - Inch series.) |
| NF L43-622-2003 | 航空航天系列.钛合金TI-P64001制球形、60度管联接器.焊接的螺纹直活管节 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded.) |
| NF L43-624-2003 | 航空航天系列.钛合金TI-P64001制球形、60度管联接器.焊接箍 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Ferrules, welded.) |
| NF L43-627-2003 | 航空航天系列.60度钛合金TI-P64001球形管接头.焊接的90度弯头 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Elbows 90 o, welded.) |
| NF L43-629-2003 | 航空航天系列.耐热钢制37度球形管接头.端部焊接的90度弯管接头.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Elbow 90 o nipples, welded end - Inch series.) |
| NF L43-631-2003 | 航空航天系列.耐热钢制37度球形管接头.端部焊接的箍.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - ferrules, welded end - Inch series.) |
| NF L43-633-2003 | 航空航天系列.耐热钢制37度球形管接头.端部焊接的三通接头.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Tees nipples, welded end - Inch series.) |
| NF L43-635-2003 | 航空航天系列.耐热钢制焊接管接头.90度弯头.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbows 90 o - Inch series.) |
| NF L43-636-2003 | 航空航天系列.耐热钢制焊接管接头.减速器.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series.) |
| NF L43-637-2003 | 航空航天系列.耐热钢制焊接管接头.三通管.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series.) |
| NF L46-342-2002 | 航空航天系列.焊接管用钛合金三通垫环 | (Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure.) |
| NF L46-343-2002 | 航空航天系列.焊接管用钛合金三通垫环.28 000 kPa大气压 | (Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure.) |
| NF L54-002-082-2002 | 航空航天系列.电气和光学连接的元件.试验方法.第514部分:自带焊料和助熔剂(材料)接触片的可焊接性 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 514 : solderability of contacts with self-contained solder and flux.) |
| NF M50-022-2000 | 燃气供应系统.焊接钢管线.功能要求 | (Gas supply systems - Welding steel pipework - Functional requirements.) |
| NF M62-301-2-1997 | 密封罩用组件.第2部分:机械手和遥控操作抓手用手套,焊接袋,鞋罩 | (Components for containment enclosures. Part 2 : gloves, welded bags, gaiters for remote-handling tongs and for manipulators.) |
| NF M87-400-1984 | 石油工业.带外部杆和螺栓盖的钢制阀门.法兰或焊接端点ＩＳＯＰＮ２０．ＩＳＯＰＮ４２０ | (Petroleum industry. Steel gate valves with-on flanges and joints. ISO PN 20 to ISO PN 420.) |
| NF M88-703-1988 | 液态烃分配装置.商品丁烷和丙烷焊接钢瓶.构造.试验.设备 | (Equipment for the distribution of liquefied hydrocarbons. Welded steel cylinders for commercial butane and propane. Construction. Tests. Fittings.) |
| NF M88-712-1998 | 液化天然气(GPL)用可移动多次装填的焊接钢瓶.设计和结构 | (Transportable refillable welded steel cylinders for liquefied petroleum gas (GPL). Design and construction.) |
| NF M88-712/A1-2002 | 液化天然气(GPL)用可移动多次装填的焊接钢瓶.设计和结构 | (Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Design and construction.) |
| NF M88-713-1996 | 液化石油气(LPG)用适于再装的可运输焊接钢瓶.装填前、装填中及装填后的检查程序 | (Transportable refillable welded steel cylinders for liquefied petroleum gas (lpg). Procedure for checking before, during and after filling.) |
| NF M88-714-1996 | 液化石油气(LPG)用适于再装的可运输焊接钢瓶.周期性再鉴定(欧洲标准EN 1440) | (TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG). PERIODIC REQUALIFICATION. (EUROPEAN STANDARD EN 1440).) |
| NF M88-716-2002 | 液化石油气(LPG)用焊接钢罐.槽罐车.设计和生产 | (Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture.) |
| NF M88-717-2002 | 地面装置用体积小于13 m3的液化石油气(LPG)储存用系列焊接钢罐产品.设计和生产 | (Static welded steel cylindrical tanks, serially produced for the storage of Liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation above ground - Design and manufact) |
| NF M88-728-2003 | 液化石油气用(LPG)可运输可再填充焊接铝瓶.设计和结构 | (Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction.) |
| NF P12-603-2000 | 圬工辅助成份的试验方法.第3部分:预制床连接处增强的焊接剪切负载容量的测定 | (Methods of test for ancillary components for masonry - Part 3 : determination of shear load capacity of welds in prefabricated bed joint reinforcement.) |
| NF P16-325-1-1999 | 废水系统有插端和管座的径向焊接热浸电镀钢管管道和配件.第1部分:要求,试验和质量控制(EN1123-1) | (Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.) |
| NF P16-325-2-1999 | 废水系统有插端和管座的径向焊接热浸电镀钢管管道和配件.第2部分:尺寸(EN1123-2) | (Pipes and fittings of longitudinally welded, hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 2 : dimensions.) |
| NF P16-326-1-1999 | 废水系统用带套管的纵向焊接不锈钢管的管和配件.第1部分:要求、试验和质量控制 | (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.) |
| NF P16-326-2-1999 | 废水系统用带套管的纵向焊接不锈钢管的管和配件.第2部分:系统S.尺寸 | (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 2 : systems S. Dimensions.) |
| NF P16-326-3-1999 | 废水系统用带套管的纵向焊接不锈钢管的管和配件.第2部分:系统X.尺寸 | (Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Part 3 : system X. Dimensions.) |
| NF P19-108-1998 | 开式结构高压蒸氧加气混凝土或轻集料混凝土预制件用钢筋网或组架焊接接缝剪切强度的测定 | (Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
| NF P22-250-1978 | 金属结构件.圆形空心型材交叉切割焊接件.焊接件设计和鉴定 | (METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS. DESIGN AND INSPECTION.) |
| NF P22-251-1978 | 金属结构件.圆形空心型材交叉切割焊接件.构造规定 | (METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS.CONSTRUCTION.) |
| NF P22-252-1978 | 金属结构件.圆形空心型材焊接件 | (METAL STRUCTURES. WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS.) |
| NF P22-255-1979 | 金属结构件.圆形或矩形空心型材I或H型焊接件.设计和检验 | (METAL CONSTRUCTION. HOLLOW SECTION WELDED ASSEMBLIES ON TYPE I AND H SECTIONS. DESIGN AND VERIFICATION.) |
| NF P22-258-1982 | 金属结构件.静态负荷下空心型材和矩形空心型材焊接件.设计和检验 | (WELDED ASSEMBLIES OF HOLLOW SECTIONS AND RECTANGULAR HOLLOW SECTIONS SUBJECTED TO STATIC LOADING. DESIGN AND VERIFICATION.) |
| NF P22-470-1989 | 金属结构.静负荷焊接连接.结构规定和焊接检验 | (STEEL CONSTRUCITON. WELDED CONNECTIONS. DETAILS AND DESIGN OF WELDS.) |
| NF P22-471-1984 | 金属结构.焊接连接.制造 | (Metallic construction. Welded joints. Fabrication.) |
| NF P22-473-1986 | 金属结构.焊接连接.无损检验范围 | (METAL CONSTRUCTION. WELDED ASSEMBLIES. RANGES OF NON DESTRUCTIVES CONTROL.) |
| NF P24-505-2000 | 门窗制造用未增塑聚氯乙烯型材.焊接弯头和T接头强度的测定 | (Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints.) |
| NF P36-403-1989 | 排雨水用轧制焊接锌管 | (RAINWATER GOODS. METALLIC PIPES,ALBOWS AND HEADS. SPECIFICATIONS.) |
| NF P37-408-1947 | 屋顶附件.巴黎框“式焊接或铆接板制屋顶排水框架.术语.尺寸 | (ROOF SKYLIGHT RACK-MOUNTED WITH DRIP MOULDING KNOWN IN FRANCE AS “PARISIAN-TYPE“ OF WELDED OR RIVETED STEEL. TERMINOLY. DIMENSIONS.) |
| NF P94-115-1990 | 地质工程学.土地.勘测和试验.B型动力钻入的焊接 | (SOILS INVESTIGATION AND TESTING. IN SITU TESTS. DYNAMIC PENETRATION B TIP.) |
| NF S75-509-2002 | 焊接人员用防护手套 | (Protective gloves for welders.) |
| NF S77-104-2003 | 人眼防护.焊接及有关技术用滤光镜.透射要求和推荐使用方法 | (Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use.) |
| NF S77-113-2004 | 人员的眼睛保护.自动焊接滤光镜 | (Personal eye-protection - Automatic welding filters.) |
| NF T47-220-2003 | 气焊机.焊接、切割和相关工艺用橡胶软管 | (Gas welding equipment - Rubber hoses for welding, cutting and allied processes.) |
| NF T47-221-1996 | 气焊设备.焊接和相关工艺用热塑管 | (Gas welding equipment. Thermoplastic hoses for welding and allied processes.) |
| NF T54-119-1976 | 塑料.增塑聚氯乙烯塑料薄膜.高频焊接试验常规方法 | (PLASTICS.PLASTICIZED PVC SHEETS. CONVENTIONAL TEST METHOD FOR HIGH FREQUENCY WELDING.) |
| NF T54-120-1976 | 塑料.薄膜.热焊接试验常规方法（热棒法） | (PLASTICS. SHEETS. ASSESSMENT OF SUITABILITY FOR THERMAL WELDING. (HOT BAR METHOD.)) |
| NF T54-412-2000 | 焊接热塑结构的特性值.热塑性设备设计用允许应力和模数的测定 | (Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment.) |
| NF T58-202-1-2000 | 焊接固定常压热塑性槽罐.第1部分:总则 | (Welded static non-pressurised thermoplastic tanks - Part 1 : general principles.) |
| NF T58-202-2-2000 | 焊接固定常压热塑性槽罐.第2部分:立式圆柱形槽罐的计算 | (Welded static non-pressurised thermoplastic tanks - Part 2 : calculation of vertical cylindrical tanks.) |
| NF T58-202-3-2000 | 焊接固定常压热塑性槽罐.第3部分:单层壁的长方形槽罐的设计和计算 | (Welded static non-pressurised thermoplastic tanks - Part 3 : design and calculation for single skin rectangular tanks.) |
| NF T58-202-4-2000 | 焊接固定常压热塑性槽罐.第4部分:法兰连接的设计和计算 | (Welded static non-pressurised thermoplastic tanks - Part 4 : design and calculation of flanged joints.) |
| 编号 | 中文名称 | 英文名称 |