欧洲焊接标准(EN welding standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC
编号 中文名称 英文名称
CR 12361-1996 金属材料焊接的破坏性试验 宏观和微观检验用腐蚀剂 Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination
CR 14599-2002 与EN 1792相关的焊接的术语及定义 Terms and definitions for welding purposes in relation with EN 1792
CR ISO 15608-2000 焊接 金属材料分类体系指南（ISO/TR 15608:2000） Welding - Guidelines for a metallic material grouping system (ISO/TR 15608:2000)
CR ISO 17663-2001 焊接 焊接和类似加工热处理质量要求指南（ISO/TR 17663:2001） Welding - Guidelines for quality requirements for heat treatment in connection with welding and allied processes (ISO/TR 17663:2001)
EN 1011-1-1998+A1-2002 焊接 金属材料焊接的推荐规范 第1部分：电弧焊接的通用指南 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
EN 1011-2-2001 焊接 金属材料焊接的推荐规范 第2部分：铁素体钢的电弧焊接 Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
EN 1011-3-2000 焊接 金属材料焊接的推荐规范 第3部分：不锈钢的电弧焊接 Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
EN 1011-4-2000 焊接 金属材料焊接的推荐规范 第4部分：铝和铝合金的电弧焊接 Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys
EN 1011-5-2003 焊接 金属材料焊接的推荐规范 第5部分：复层钢焊接 Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel
EN 10120-1996 焊接气瓶用钢薄板及带材 Steel sheet and strip for welded gas cylinders
EN 10217-1-2002 压力用途的焊接钢管　交货技术条件　第1部分：有规定室温特性的非合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10217-2-2002 压力用途的焊接钢管　交货技术条件　第2部分：有规定高温特性的电焊非合金及合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-3-2002 压力用途的焊接钢管　交货技术条件　第3部分：合金细晶粒钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10217-4-2002 压力用途的焊接钢管　交货技术条件　第4部分：有规定低温特性的电焊非合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
EN 10217-5-2002 压力用途的焊接钢管　交货技术条件　第5部分：有规定高温特性的埋弧焊非合金及合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-6-2002 压力用途的焊接钢管　交货技术条件　第6部分：有规定低温特性的埋弧焊非合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
EN 10219-1-1997 冷成型细晶粒钢和非合金钢的焊接结构空心型材　第1部分：交货技术要求 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements
EN 10219-2-1997 冷成型细晶粒钢和非合金钢的焊接结构空心型材　第2部分：公差、尺寸和截面特性 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
EN 10220-2002 无缝和焊接钢管　单位长度的尺寸和质量 Seamless and welded steel tubes - Dimensions and masses per unit length
EN 10223-4-1998 栅栏用钢丝和钢丝制品　钢丝焊接网式栅栏 Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing
EN 10223-7-2002 栅栏用钢丝和钢丝制品　第7部分：栅栏用钢丝焊接板 Steel wire and wire products for fences - Part 7: Steel wire welded panels for fencing
EN 10225-2001 固定海上结构用的可焊接结构钢　交货技术条件 Weldable structural steels for fixed offshore structures - Technical delivery conditions
EN 10246-1-1996 钢管的无损检测　第1部分：证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
EN 10246-11-2000 钢管的无损检测　第11部分：表面缺陷探测用的无缝和焊接钢管的液体渗透检验 Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
EN 10246-12-2000 钢管的无损检测　第12部分：表面缺陷探测用的无缝和焊接铁磁钢管的磁粉检验 Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
EN 10246-13-2000 钢管的无损检测　第13部分：无缝和焊接钢管（埋弧焊除外）自动全周界厚度的超声检验 Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
EN 10246-14-1999 钢管的无损检测　第14部分：层状缺陷探测用的无缝和焊接钢管(埋弧焊接除外)的自动超声检验 Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
EN 10246-15-2000 钢管的无损检测　第15部分：层状缺陷探测用的制造焊接钢管用钢带/钢板的自动超声检验 Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
EN 10246-16-2000 钢管的无损检测　第16部分：层状缺陷探测用的焊接钢管焊缝附近区域的自动超声检验 Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
EN 10246-17-2000 钢管的无损检测　第17部分：层状缺陷探测用的无缝和焊接钢管端部的自动超声检验 Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
EN 10246-18-2000 钢管的无损检测　第18部分：层状缺陷探测用的无缝和焊接铁磁钢管端部的磁粉检验 Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
EN 10246-2-2000 钢管的无损检测　第2部分：证明液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管（埋弧焊除外） 的自动涡流 Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
EN 10246-3-1999 钢管的无损检测　第3部分：缺陷探测用无缝和焊接钢管(埋弧焊除外)的自动涡流检验 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
EN 10246-4-1999 钢管的无损检测　第4部分：横向缺陷探测用无缝或焊接铁磁钢管的（埋弧焊除外）自动全周界磁传感器检验漏磁 Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
EN 10246-5-1999 钢管的无损检测　第5部分：径向缺陷探测用无缝或焊接铁磁钢管的（埋弧焊除外）自动全周界磁传感器检验漏磁 Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
EN 10246-7-1996 钢管的无损检测　第7部分：纵向缺陷探测用的无缝和焊接铁磁钢管(埋弧焊除外)的自动周界超声检验　 Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections
EN 10273-2000 压力用途的规定高温度性能的热轧可焊接钢棒 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10296-1-2003 机械和一般工程用途的焊接圆形钢管　交货技术条件　第1部分：非合金钢管和合金钢管 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10305-2-2002 高精密度用途的钢管　交货技术条件　第2部分：冷拔焊接钢管 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
EN 10305-3-2002 高精密度用途的钢管　交货技术条件　第3部分：冷定径焊接钢管 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
EN 10305-5-2003 高精密度用途的钢管　交货技术条件　第5部分：冷定径方形和矩形焊接钢管 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes
EN 10312-2002 传送人类消耗的含水液体（包括水）的焊焊接不锈钢管 交货技术条件 Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
EN 1043-1-1995 金属材料焊接的破坏试验 硬度测试 第1部分：电弧焊接连接件的硬度试验 Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
EN 1043-2-1996 金属材料焊接的破坏试验 硬度试验 第2部分：焊接连接件的显微硬度测试 Destructive tests on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints
EN 1123-1-1999 废水系统用带套管的纵向焊接热浸镀锌钢管管道及配件 第1部分：要求、测试和质量控制 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
EN 1123-1/prA1-2002 废水系统用带套管的纵向焊接热浸镀锌钢管管道及配件 第1部分：要求、测试和质量控制 修改A1 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1
EN 1123-2-1999 废水系统用带套管和插口的纵向焊接热浸镀锌钢管管道及配件 第2部分：尺寸 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions
EN 1124-1-1999 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第1部分：要求、测试、质量控制 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
EN 1124-1/prA1-2002 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第1部分：要求、测试、质量控制 修改A1 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1
EN 1124-2-1999 废水系统用带套管和插口的纵向焊接不锈钢管管道和配件 第2部分：系统S 尺寸 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S - Dimensions
EN 1124-3-1999 废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第3部分：系统X 尺寸 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
EN 12062-1997 焊接无损检测　金属材料的一般规则 Non-destructive examination of welds - General rules for metallic materials
EN 12070-1999 焊接易耗品　耐蠕变钢的电弧焊用丝状焊条、金属丝和棒　分级 Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels - Classification
EN 12071-1999 焊接易耗品　耐蠕变钢的气体遮蔽金属电弧焊用管状焊条　分级 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification
EN 12072-1999 焊接易耗品　不锈钢和耐热钢电弧焊用丝状焊条、金属丝和棒　分级 Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification
EN 12073-1999 焊接易耗品　不锈钢和耐热钢有或无气体遮蔽金属电弧焊接用管状有芯焊条　分级 Welding consumables - Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels - Classification
EN 12074-2000 焊接易耗品　对焊接及有关工艺用易耗品的制造、供应和分配的质量要求 Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
EN 12345-1998 焊接　带图示的有关焊接接头的多语种术语 Welding - Multilingual terms for welded joints with illustrations
EN 12493-2001 液化石油气（ＬＰＧ）用焊接钢罐　油槽车设计和制造 Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture
EN 12517-1998 焊缝的无损检验　焊接接头放射线检验　验收等级 Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels
EN 12534-1999 焊接消耗品　高强度钢气体保护金属电弧焊用丝状电极、焊丝和焊条和沉渍物 分类 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification
EN 12535-2000 焊接消耗品　高强度钢气体保护金属电弧焊用管型药芯焊条　分类 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification
EN 12536-2000 焊接消耗品　非合金钢和抗蠕变钢气焊用焊条　分类 Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification
EN 1254-1-1998 铜和铜合金 管件 第1部分：低温焊接或纤焊接到铜管上的毛细管用端头管件 Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
EN 12542-2002 地上的容积不大于13m3 立方米贮存液化石油气（ＬＰＧ）用静止的焊接圆形钢罐　设计和制造 Static welded steel cylindrical tanks, serially produced for the storage of Liquified Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> and for installation above ground - Design and manufacture
EN 1256-1996 气焊设备 焊接切割及类似加工设备的软管附件规范 Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes
EN 12573-1-2000 静态无压焊接热塑料罐　第1部分：概述 Welded static non-pressurized thermoplastic tanks - Part 1: General principles
EN 12573-2-2000 静态无压焊接热塑料罐　第2部分：立式圆筒罐的计算 Welded static non-pressurized thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks
EN 12573-3-2000 静态无压焊接热塑料罐　第3部分：单层矩形罐的设计和计算 Welded static non-pressurized thermoplastic tanks - Part 3: Design and calculation for single skin rectangular tanks
EN 12573-4-2000 静态无压焊接热塑料罐　第4部分：法兰接头的设计和计算 Welded static non-pressurized thermoplastic tanks - Part 4: Design and calculation of flanged joints
EN 12732-2000 燃气供应系统　焊接钢管　功能要求 Gas supply systems - Welding steel pipework - Functional requirements
EN 12760-1999 阀门 钢阀门套接焊接端 Valves - Socket welding ends for steel valves
EN 12797-2000 铜焊 铜焊接头的破坏性试验 Brazing - Destructive tests of brazed joints
EN 12799-2000 铜焊 铜焊接头的破坏性试验 Brazing - Non-destructive examination of brazed joints
EN 12814-1-1999+AC-2003 热塑性塑料半成品的焊接接头试验 第1部分：弯曲试验 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
EN 12814-2-2000 热塑性塑料半成品的焊接接头试验 第2部分：拉伸试验 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
EN 12814-3-2000 热塑性塑料半成品的焊接接头试验 第3部分：拉伸蠕变试验 Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
EN 12814-4-2001 热塑性塑料半成品的焊接接头试验 第4部分：剥落试验 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
EN 12814-5-2000 热塑性塑料半成品的焊接接头试验 第5部分：目测 Testing of welded joints of thermoplastics semi-finished - Part 5: Macroscopic examination
EN 12814-6-2000 热塑性塑料半成品的焊接接头试验 第6部分：低温拉伸试验 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
EN 12814-7-2002 热塑性塑料半成品的焊接接头试验 第7部分：采用腰形试样的拉伸试验 Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens
EN 12814-8-2001+AC-2003 热塑性塑料半成品的焊接接头试验 第8部分：要求 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
EN 12862-2000 可运输气瓶 可移动再充式焊接铝合金气瓶的设计和结构规范 Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
EN 1289-1998+A1-2002 焊接的无损检验 焊接的熔深试验 验收等级 Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels
EN 1290-1998+A1-2002 焊接的无损检验 焊接的磁性粒子检验 Non-destructive examination of welds - Magnetic particle examination of welds
EN 1291-1998+A1-2002 焊接的无损检验 焊接的磁性粒子试验 验收等级 Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels
EN 13067-2003 塑料焊接人员 焊工资质测试 热塑性塑料焊接组件 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
EN 13100-1-1999 热塑性塑料半成品焊接接头的无损检验 第1部分：外观检查 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
EN 13110-2002 可移动再充式焊接液化石油气铝瓶 设计和构造 Transportable refillable welded aluminium cylinders for liquefied petroleum gas - Design and construction
EN 1320-1996 金属材料焊接的破坏试验 断裂试验 Destructive tests on welds in metallic materials - Fracture test
EN 1321-1996 金属材料焊接的破坏试验 焊接的宏观和微观检验 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
EN 1326-1996 气焊设备 气体钎焊和定位焊接用小型设备 Gas welding equipment - Small kits for gas brazing and welding
EN 1327-1996 气焊设备 焊接和相关工艺用热塑软管 Gas welding equipment - Thermoplastic hoses for welding and allied processes
EN 13322-1-2003 可移动气瓶 再充式焊接钢气瓶 设计与结构 第1部分：碳钢 Transportable gas cylinders - Refillable welded steel gas cylinders; Design and construction - Part 1: Carbon steel
EN 13322-2-2003 可移动气瓶 再充式焊接不锈钢气瓶 设计与结构 第2部分：不锈钢 Transportable gas cylinders - Refillable welded steel gas cylinders; Design and construction - Part 2: Stainless steel
EN 13347-2002 铜和铜合金 焊接和黄铜焊用棒和线 Copper and copper alloys - Rod and wire for welding and braze welding
EN 13918-2003 气焊设备 焊接、切割及关工艺中所用的气瓶上的集成流量计调压器 分类、规范和试验方法 Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests
EN 14075-2002 系列生产的液化石油气（LPG）储存量不大于13立方米的安装在地下的固定式焊接钢圆罐　设计和制造 Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> and for installation underground - Design and manufacture
EN 14140-2003 可运输的可重复充装的焊接液化石油气钢瓶 （LPG） 设计和结构的选择 Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction
EN 14163-2001 石油和天然气工业 管道运输系统 管道的焊接 Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified)
EN 1418-1997 焊接人员 设定完全机械化和自动化金属材料焊接的熔焊和阻焊的焊接操作者的批准测试 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
EN 1435-1997+A1-2002 焊接的无损检验 焊接接缝的X射线照相检验 Non-destructive examination of welds - Radiographic examination of welded joints
EN 1439-1996 液化石油气(LPG)用可运输可再充填的焊接钢瓶 充气前 充气时和充气后的检验程序 Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Procedure for checking before, during and after filling
EN 1440-1996+AC-1999 液化石油气(LPG)用可运输可再充填的焊接钢 周期重复鉴定 Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic requalification / Note: To be replaced by prEN 1440 (2003-09).
EN 1442-1998+A1-2002+AC-1999 液化石油气(LPG)用可运输可再充填焊接钢气瓶 设计和生产 Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction
EN 14612-2003 航天产品保证　自动机床波动焊接的核准和批准 Space product assurance - Verification and approval of automatic machine wave soldering
EN 1592-1-1997 铝和铝合金 HF接缝焊接管 第1部分：检验和交货技术条件 Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery
EN 1592-2-1997 铝和铝合金 HF接缝焊接管 第2部分：机械性能 Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties
EN 1592-3-1997 铝和铝合金 HF接缝焊接管 第3部分：圆形管的尺寸和形状公差 Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes
EN 1592-4-1997 铝和铝合金 HF接缝焊接管 第4部分：方形、矩形和异形管的尺寸和形状公差 Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes
EN 1597-1-1997 焊料 试验方法 第1部分：镍和镍合金钢中完全焊接金属试验样品用试件 Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys
EN 1597-2-1997 焊接耗材 试验方法 钢单焊和双焊技术试验样品试件的制备 Welding consumables - Test methods - Part 2: Preparation of test piece for single-run and two-run technique test specimens in steel
EN 1597-3-1997 焊接耗材 试验方法 第3部分：角焊接中焊料定位能力的试验 Welding consumables - Test methods - Part 3: Testing of positional capability of welding consumables in a fillet weld
EN 1598-1997+A1-2001 焊接和类似加工的健康和安全 电弧焊工艺用透明焊接隔板、板条和屏蔽 Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes
EN 1599-1997 焊接耗材 抗蠕变钢手工金属电弧焊接涂覆电极 分类 Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification
EN 1600-1997 焊接消耗品 不锈和耐热钢手工金属电弧焊接涂覆电极 分类 Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification
EN 1668-1997 焊接耗材 非合金和细晶粒钢的惰性气体保护钨极焊用焊条 焊丝和熔敷 分类 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification
EN 169-2002 个人眼睛保护装置 在焊接及相关工艺中用的滤光器 透光度要求和推荐利用滤光器 Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use
EN 1708-1-1999 焊接 钢件的焊接接头基础详细资料 第1部分：压力用途部件 Welding - Basic weld joint details in steel - Part 1: Pressurized components
EN 1708-2-2000 焊接 钢件的焊接接头基础详细资料 第2部分：无内部压力用途部件 Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components
EN 1711-2000 焊接无损检验 通过综合平面分析对焊接的涡流检验 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
EN 1712-1997 焊接无损检验 焊接接头超声波检测 验收水平 Non destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels
EN 1713-1998 焊接无损检验 超声波检验 焊接标记的特性表示 Non-destructive examination of welds - Ultrasonic examination - Characterization of indications in welds
EN 1714-1997 焊接无损检验 焊接接头超声检验 Non destructive examination of welds - Ultrasonic examination of welded joints
EN 1715-3-1997+AC-1998 铝和铝合金 拉制坯料 第3部分：机械应用的特殊要求(包括焊接) Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)
EN 1715-4-1997 铝和铝合金 拉制坯料 第4部分：焊接应用的特殊要求 Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications
EN 1737-1998 高压多孔混凝土或开放结构轻集料混凝土预制件用钢筋板或框架焊接接头剪切强度的测定 Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 175-1997 个人防护 焊接和类似加工中眼睛和面部的防护设备 Personal protection - Equipment for eye and face protection during welding and allied processes
EN 1778-1999 焊接热塑结构特性值 热塑设备设计的允许应力和模量的测定 Characteristic values for welded thermoplastic constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment
EN 1792-2003 焊接 焊接和相关工多语种术语表 Welding - Multilingual list of terms for welding and related processes
EN 1803-2002 可运输气瓶 焊接碳钢周期检验和试验 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders
EN 22553-1994 焊接、硬钎焊和软钎焊连头 图样上的符号表示法 Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
EN 2560-1998 航空航天系列　个人眼睛保护设备　有可变遮避物或双层遮避物的焊接滤光镜 Aerospace series - Carbon fibre preimpregnates - Determination of the resin flow
EN 2574-1990 航空航天系列　焊接规范　制图资料 Aerospace series; welds; information on drawings
EN 25817-1992 钢弧焊接头 缺点质量分级指南 Arc-welded joints in steel; guidance on quality levels for imperfections (ISO 5817:1992)
EN 2591-424-2001 航空航天系列　光电连接元件　试验方法　第424部分：无焊接缠绕连接 拆卸力 Aerospace series - Elements of electrical and optical connection; Test methods - Part 424: Stripping force, solderless wrapped connections
EN 2591-425-2001 航空航天系列　光电连接元件　试验方法　第425部分：无焊接缠绕连接 展开能力 Aerospace series - Elements of electrical and optical connection; Test methods - Part 425: Unwrapping capability, solderless wrapped connections
EN 2656-2001 航空航天系列　连接管　焊接的连接端几何结构 Aerospace series - Pipe coupling - Coupling end, welded, Geometric configuration
EN 26848-1991 惰性气体保护电弧焊接以及等离子气体切割和焊接用的钨极 编码 Tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding- Codification (ISO 6848:1984)
EN 27286-1991 电阻焊接设备的图形符号 Graphical symbols for resistance welding equipment (ISO 7286:1986)
EN 27963-1992 钢件的焊缝 2号超声波焊接探伤校准块 Welds in steel; calibration block no. 2 for ultrasonic examination of welds (ISO 7963:1985)
EN 288-1-1992+A1-1997 金属材料焊接程序规范和鉴定 第1部分：熔焊的通用规则 Specification and qualification of welding procedures for metallic materials; part 1: general rules for fusion welding
EN 288-2-1992+A1-1997 金属材料焊接程序规范和鉴定 第2部分：电弧焊焊接程序规范 Specification and approval of welding procedures for metallic materials; part 2: welding procedure specification for arc welding / Note: To be replaced by prEN ISO 15609-1 (2003-10) (in preparation).
EN 288-3-1992+A1-1997 金属材料焊接程序规范和鉴定 第3部分：钢的电弧焊焊接程序试验 Specification and approval of welding procedures for metallic materials; part 3: welding procedure tests for the arc welding of steels
EN 288-4-1992+A1-1997 金属材料焊接程序规范和鉴定 第4部分：铝及其合金的电弧焊焊接程序试验 Specification and approval of welding procedures for metallic materials; part 4: welding procedure tests for the arc welding of aluminium and its alloys
EN 288-5-1994 金属材料焊接程序规范和鉴定 第5部分：使用已被认可的焊接耗材对电弧焊的鉴定 Specification and approval of welding procedures for metallic materials - Part 5: Approval by using approved welding consumables for arc welding
EN 288-6-1994 金属材料焊接程序规范和鉴定 第6部分：有关以前经验的鉴定 Specification and approval of welding procedures for metallic materials - Part 6: Approval related to previous experience
EN 288-7-1995 金属材料焊接程序规范和鉴定 第7部分：使用标准焊接程序的电弧焊的鉴定 Specification and approval of welding procedures for metallic materials - Part 7: Approval by a standard welding procedure for arc welding
EN 288-8-1995 金属材料焊接程序规范和鉴定 第8部分：用预焊接试验进行鉴定 Specification and approval of welding procedures for metallic materials - Part 8: Approval by a pre-production welding test
EN 288-9-1999 金属材料焊接程序规范和鉴定 第9部分：传输管道陆地和海上场所对接焊中管道焊接用焊接程序试验 Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
EN 30042-1994 铝和铝焊合金弧焊接头 缺陷质量分级指南 Arc-welded joints in aluminium and its weldable alloys - Guidance on quality levels for imperfections (ISO 10042:1992)
EN 3081-2001 航空航天系列 钛合金管连接件8°30′修理用带动态梁密封端头的焊接箍圈 Aerospace series - Pipe coupling 8°30′in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair
EN 3082-2001+AC-2003 航空航天系列 钛合金管连接件8°30′修理用焊接端的舱壁管接头 Aerospace series - Pipe coupling 8°30′in titanium alloy - Unions, bulkhead welded end, for repair
EN 3083-2001+AC-2003 航空航天系列 钛合金管连接件8°30′修理用长焊接端舱壁管接头 Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long welded end, for repair
EN 3084-2001+AC-2003 航空航天系列 钛合金管连接件8°30′修理用焊接端螺纹管接头 Aerospace series - Pipe coupling 8°30′in titanium alloy - Unions, welded end threaded for repair
EN 3243-2001 航空航天系列 钛合金管连接件8°30′ 带动态梁密封端头的焊接箍 Aerospace series - Pipe coupling 8?30 in titanium alloy - Ferrule, welded, with dynamic beam seal end
EN 3247-2001 航空航天系列 钛合金管连接件8°30′舱壁焊接端管接头 Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead welded end
EN 3272-2001 航空航天系列 钛合金管连接件8°30′带动态梁密封端头的焊接金属箍 几何结构 Aerospace series - Pipe coupling 8?30 - Dynamic beam seal end for ferrule, welded; Geometric configuration
EN 3561-2001+AC-2003 航空航天系列 钛合金管连接件8°30′具有动态梁密封端箍圈　焊接和轧制管端口 Aerospace series - Pipe coupling 8?0 in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end
EN 3688-2001+AC-2003 航空航天系列　钛合金焊接管用的T形环填缝金属　14000 kPa标准压强 Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14000 kPa nominal pressure
EN 3689-2001+AC-2003 航空航天系列　钛合金焊接管用的T形环填缝金属　28000 kPa标准压强 Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure
EN 379-2003 人眼防护 自动焊接滤光片 Personal eye-protection - Automatic welding filters
EN 3852-2002 航空航天系列　钛合金TI-P64001　球形60°管连接　焊接螺纹式直联管节　 Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded
EN 3854-2002 航空航天系列　钛合金TI-P64001　球形60°管连接　焊接金属箍 Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Ferrules, welded
EN 3857-2002 航空航天系列　钛合金TI-P64001　球形60°管连接　焊接90°弯头 Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Elbows 90? welded
EN 3868-2003 航空航天系列　管连接　松套法兰和密封垫　TI-P64001钛合金焊接法兰连接器 Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001 / Note: To be replaced by prEN 3868 (2003-05).
EN 3882-2001 航空航天系列　耐热合金NI-WH1801(NiCr20Co18Ti3Al2)　焊接用填缝金属　 Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding
EN 3883-2001 航空航天系列　耐热合金 NI-WH2301(NiCr22Fe19Mo9Co2)　焊接用填缝金属 Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding
EN 3884-2001 航空航天系列　耐热合金 NI-WH2601(NiCr19Nb5Mo3Ti)　焊接用填缝金属 Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding
EN 3885-2001 航空航天系列　耐热合金 NI-WH3601(NiCr22Mo9Nb4)　焊接用填缝金属 　 Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding
EN 3886-2001 航空航天系列　耐热合金 NI-WH1303(NiCo20Cr20Mo5Ti2AI)　焊接用填缝金属 　 Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2AI) - Filler metal for welding
EN 3887-2001 航空航天系列　耐热合金 CO-WH4101(CoCr20W15Ni） 焊接用填缝金属 　 Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding
EN 3888-2001 航空航天系列　耐热合金 CO-WH1402(CoCr22Ni22W15) 焊接用填缝金属 Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding
EN 3889-2001 航空航天系列　FE-WM3801 (X5CrNiCu17-4)钢　 焊接用填缝金属 　 Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding
EN 3890-2001 航空航天系列　 FE-WM1502 (X11CrNiMoVN12-3)钢　 焊接用填缝金属 Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding
EN 3892-2001 航空航天系列　钛合金 TI-W64001　 焊接用填缝金属 Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding
EN 3893-2001 航空航天系列　钛合金 TI-W19001　 焊接用填缝金属 Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding
EN 3894-2001 航空航天系列　耐热合金 NI-WD3201(NiMo25Fe6Cr5）　 焊接用填缝金属 　　 Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding
EN 3895-2001 航空航天系列　耐热合金 NI-WH3901(NiCr16Mo15) 焊接用填缝金属 Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding
EN 3896-2001 航空航天系列　 FE-WM1501 (X13CrNiMoCo12-3-2-2)钢　 焊接用填缝金属　 Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding
EN 3897-2001 航空航天系列　 FE-WA4801 (X6CrNiMnNb18-10)钢　 焊接用填缝金属 Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding
EN 4019-2001 航空航天系列　钛合金管连接 8°30′90°焊接端弯头 Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90°welded end
EN 4020-2001 航空航天系列　钛合金管连接 8°30′90°弯头　有推力丝螺母焊接端 Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90° welded end with thrust wire nut
EN 4022-2001 航空航天系列　钛合金管连接 8°30′　舱壁焊接端90°弯头 Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90°bulkhead, welded end
EN 4024-2001 航空航天系列　钛合金管连接 8°30′有丝推力螺母焊接端45°弯头 Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 45°welded end with thrust wire nut
EN 4058-2001 航空航天系列　钛和钛合金用焊接填缝条和填缝丝　直径 0.5 mm≤D≤ 5.0 mm　尺寸 Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm - Dimensions
EN 4059-2001 航空航天系列　钢焊接用填缝条和填缝丝　直径0,5 mm≤D≤5,0 mm　尺寸 Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0.5 mm ≤ D ≤ 5.0 mm - Dimensions
EN 4060-2001 航空航天系列　耐热合金焊接用填缝条和填缝丝　直径 0.5 mm ≤D≤5.0 mm　尺寸 Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm; Dimensions
EN 4183-2001 航空航天系列　钛合金管连接8°30′　焊接端 ９０°弯头　 Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?welded ends
EN 4184-2001 航空航天系列　钛合金管连接8°30′　焊接端 ４５°弯头 Aerospace series - Pipe coupling 8?Degree 30′in titanium alloy - Elbows 45? welded ends
EN 4188-2001 空航天系列　钛合金管连接8°30′　焊接端舱壁９０度弯头 Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?bulkhead, long, welded end
EN 4233-2001 航空航天系列　钛合金管连接 8°30′　焊接螺纹管接头 Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, welded, threaded
EN 4324-2001 航空航天系列　铝合金AL-W42201　焊接用填缝金属杆 Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding; Rod
EN 4325-2001 航空航天系列　耐热合金 NI-WH1302(NiCr20Co13Mo4Ti3Al)　焊接用填缝金属丝和杆 Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding; Wire and rod
EN 4326-2001 航空航天系列　耐热合金 CO-WH4102(CoCr28W20Ni5V1)　焊接用填缝金属丝和杆 Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding; Wire and rod
EN 4327-2001 航空航天系列　耐热合金CO-WH1401(CoCr26Ni11W8)　焊接用填缝金属丝和杆 Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding; Wire and rod
EN 4328-2002 航空航天系列　钢 FE-WM1601 (X18CrWNi13-3-2)　焊接用填缝金属丝和杆 　 Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding; Wire and rod
EN 4329-2001 航空航天系列　 耐热合金NI-WH0001(NiCr20)　焊接用填缝金属丝和杆 Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding; Wire and rod
EN 4330-2002 航空航天系列　钢 FE-WA4802 (X8CrNiMn27-22-2)　焊接用填缝金属丝和杆 Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding; Wire and rod
EN 4331-2002 航空航天系列　钢 FE-WL1804 (25CrMnMo4-2-2)　焊接用填缝金属丝和杆 Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding; Wire and rod
EN 4332-2002 航空航天系列　钢 FE-WL1805 (8CrMnMo12-4-9)　焊接用填缝金属丝和杆 Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding; Wire and rod
EN 4333-2002 航空航天系列　钢 FE-WL1805 (X5CrNiCoMoWMn21-20-20-3-3-2)　焊接用填缝金属丝和杆 Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding; Wire and rod
EN 4334-2002 航空航天系列　钢 FE-WL1806 (15CrMnMoV5-4-9-3)　焊接用填缝金属丝和杆 Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding; Wire and rod
EN 4335-2002 航空航天系列　钢 FE-WA2602 (X4NiCrTiMoV26-15)　焊接用填缝金属丝和杆 Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding; Wire and rod
EN 4336-2002 航空航天系列　钢 FE-WA3801 (X4CrNiMn20-10-2)　焊接用填缝金、丝和杆 Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding; Wire and rod
EN 4337-2001 航空航天系列　耐热合金 NI-WH8901(NiCr16Ti3Mn2)　焊接用填缝金属丝和杆 Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding; Wire and rod
EN 4338-2001 航空航天系列　 耐热合金NI-WH3902(NiCr25Mo10C)　焊接用填缝金属丝和杆 Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding; Wire and rod
EN 4339-2001 航空航天系列　耐热合金 CO-WH4001(CoCr29W9)　焊接用填缝金属丝和杆 Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding; Wire and rod
EN 4340-2002 航空航天系列　镁合金 MG-W68001　焊接用填缝金属丝和杆 Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding; Wire and rod
EN 4341-2001 航空航天系列　铝合金 AL-W46431　焊接用填缝金属丝和杆 Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding; Wire and rod
EN 4342-2001 航空航天系列　钛TI-W99001　焊接用填缝金属丝和杆 Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod
EN 4343-2002 航空航天系列　钢 FE-WM1001(X13Cr12)　焊接填缝金属丝和杆 Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding; Wire and rod
EN 4344-2001 航空航天系列　钢 FE-WM1002 (X13Cr13)焊接用填缝金属丝和杆 Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding; Wire and rod
EN 439-1994 焊接消耗品 电弧焊和切割用保护气体 Welding consumables - Shielding gases for arc welding and cutting
EN 440-1994 焊接消耗品 非合金与细粒钢的气体保护金属电弧焊用丝状电极和沉积物 分类 Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
EN 4549-2003 航空航天系列　耐热钢或耐热镍基合金联管节　焊接端头　设计结构　英制系列 Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded; Design configuration; Inch series
EN 4552-2003 航空航天系列　耐热钢37度球形联管节　焊接直接头 英制系列 Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Straight nipples, welded end; Inch series
EN 4553-2003 航空航天系列　耐热钢37度球形联管节　焊接90度弯接头　英制系列 Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Elbow 90?nipples, welded end; Inch series
EN 4555-2003 航空航天系列　耐热钢37度联管节　焊接箍　英制系列 Aerospace series - Pipe coupling 37? in heat resisting steel - Ferrules, welded end; Inch series
EN 4561-2003 航空航天系列　耐热钢焊接联管节　90度弯管　英制系列 Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90? Inch series
EN 4562-2003 航空航天系列　耐热钢焊接联管节　变径管　英制系列 Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors; Inch series
EN 4563-2003 航空航天系列　耐热钢焊接联管节　T形接头　英制系列 Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees; Inch series
EN 470-1-1995+A1-1998 焊接和类似操作用防护服 第1部分：一般要求 Protective clothing for use in welding and allied processes - Part 1: General requirements
EN 499-1994 焊接消耗品 非合金与细粒钢的手工金属电弧焊用包剂焊条 分类 Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels - Classification
EN 50069-1991+A1-1993 充气高压开关设备和控制设备用铸铝合金和锻铝合金焊接的混合材料　 外壳规范 Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear
EN 514-2000 门窗建造用未增塑聚氯乙烯型材 焊接弯头和T型接头强度的测定 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T joints
EN 531-1995+A1-1998 热环境中工人的防护服(不包括消防服和焊接服) Protective clothing for industrial workers exposed to heat (excluding firefighters and welders clothing)
EN 559-2003 气焊设备 焊接、切割和同类处理用橡胶软管 Gas welding equipment - Rubber hoses for welding, cutting and allied processes
EN 560-1994 气焊设备 焊接、切割和同类处理用设备的软管连接 Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
EN 561-2002 气焊设备 焊接、切割和同类处理用断路阀门快速连接器 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
EN 562-2003 气焊设备 焊接、切割和同类处理用压力计 Gas welding equipment - Pressure gauges used in welding, cutting and allied processes
EN 60068-2-58-1999 环境试验　第2-58部分：试验　 试验Td：表面安装元器件用可焊性、耐金属化溶融和耐焊接热试验方法 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (IEC 60068-2-58:1999)
EN 60512-12-6-1996 电子设备用机电元件　基本试验规程和测量方法 第12部分：可钎焊性试验方法第6节：试验12f：机械钎焊焊接过 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering (IEC 60512-12-6:1996)
EN 60512-12-7-2001 电子设备用连接器　试验和测量　第12-7:可焊接试验　试验12g 可焊性别　湿平衡法 Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests; Test 12g: Solderability, wetting balance method (IEC 60512-12-7:2001)
EN 60512-16-20-1996 电子设备用机电元件　基本试验规程和测量方法　第16部分：触点和终端机械试验　第20节：试验１６t　机械强 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections) (IEC
EN 60534-3-3-1998 工业过程控制阀　第三部分：尺寸　对接焊接　两向　球型　垂直模式控制阀的末端对末端尺寸 Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998)
EN 60749-15-2003 半导体器件　机械和气候试验方法 　第15部分：透孔安装设备对焊接温度的阻抗 Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices (IEC 60749-15:2003) / Note: Endorsement notice
EN 60974-1-1998+A1-2000+A2-2003 电弧焊设备　第１部分：焊接电源 Arc welding equipment - Part 1: Welding power sources (IEC 60974-1:1998)
EN 60974-12-1995 弧焊设备　第12部分：焊接电缆的连接器 Arcwelding equipment - Part 12: Coupling devices for welding cables (IEC 60974-12:1992, modified)
EN 61076-4-107-2001 电子设备用连接器　第4-107部分：有质量评定的印制板连接器　印制电路板用基本网格为2.0 mm、固定部分带有 Connectors for electronic equipment-part 4-107:Printed board connectors with assessed quality; Detail specification for shielded two-part connectors having a basic grid of 2, 0 mm, fixed part with solder and press-in terminations for printed boards
EN 61188-5-1-2002 印制电路板和印制电路板组件　设计和使用　第5-1部分：附着(焊接/接合)的考虑　通用要求 Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations; Generic requirements (IEC 61188-5-1:2002) / Note: Endorsement notice
EN 61188-5-2-2003 印制电路板和印制电路板组件　设计和使用　第5-2部分：附着(焊接/接合)的考虑　分立元件 Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations; Discrete components (IEC 61188-5-2:2003) / Note: Endorsement notice
EN 61188-5-6-2003 印制电路板和印制电路板组件　设计和使用　第5-6部分：附着(焊接/接合)的考虑　四边带有J导线的晶片载体 Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003) / Note: Endorsement notice
EN 61191-1-1998 印刷电路板组件　第1部分：总规范　使用表面安装和相关装配技术的焊接电气和电子组件的要求 Printed board assemblies - Part 1: Generic specification: Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (IEC 61191-1:1998)
EN 61191-2-1998 印刷电路板组件　第2部分：分规范　表面安装焊接组件的要求 Printed board assemblies - Part 2: Sectional specification: Requirements for surface mount soldered assemblies (IEC 61191-2:1998)
EN 61191-3-1998 印刷电路板组件　第3部分：分规范　通孔安装焊接组件的要求 Printed board assemblies - Part 3: Sectional specification: Requirements for through-hole mount soldered assemblies (IEC 61191-3:1998)
EN 61191-4-1998 印刷电路板组件　第4部分：分规范　端点焊接组件的要求 Printed board assemblies - Part 4: Sectional specification: Requirements for terminal soldered assemblies (IEC 61191-4:1998)
EN 719-1994 焊接配合 任务和责任 Welding coordination - Tasks and responsibilities
EN 729-1-1994 焊接质量要求 金属材料熔焊 第1部分：选择和使用指南 Quality requirements for welding - Fusion welding of metallic materials - Part 1: Guidelines for selection and use
EN 729-2-1994 焊接质量要求 金属材料熔焊 第2部分：综合质量要求 Quality requirements for welding - Fusion welding of metallic materials - Part 2: Comprehensive quality requirements
EN 729-3-1994 焊接质量要求 金属材料熔焊 第3部分：标准质量要求 Quality requirements for welding - Fusion welding of metallic materials - Part 3: Standard quality requirements
EN 729-4-1994 焊接质量要求 金属材料熔焊 第4部分：基本质量要求 Quality requirements for welding - Fusion welding of metallic materials - Part 4: Elementary quality requirements
EN 756-1995 焊接消耗品 非合金和细精粒钢埋弧焊用电焊条和电焊剂混合物 分类 Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
EN 757-1997 焊接消耗品 高强度钢手工金属弧焊用涂层焊条 分类 Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification
EN 758-1997 焊接消耗品 带和不带气体保护壳的非合金钢及细粒钢金属电弧焊接用管状芯焊条 分类 Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification
EN 759-1997 焊接消耗品 焊接填充金属的交货技术条件 产品型号、尺寸、公差和标志 Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and marking
EN 760-1996 焊接消耗品 埋弧焊用焊剂 分类 Welding consumables - Fluxes for submerged arc welding - Classification
EN 804-1994 塑料管道系统 压力管道溶焊接头的喷射铸造插接部件 瞬时内部液压阻力的试验方法 Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
EN 846-3-2000 砖石结构辅助部件试验方法 第3部分：预制底层接缝加固焊接剪切负荷量的测定 Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement
EN 874-1995 气焊设备 圆柱筒焊接用氧/燃料气体焊炬（切割机型） 结构型式、一般规范和试验方法 Gas welding equipment - Oxygen/fuel gas blowpipes (cutting machine type) of cylindrical barrel - Type of construction, general specifications, test methods
EN 875-1995 金属材料焊接的破坏试验 冲击试验 试样定位、槽口取向和检验 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
EN 876-1995 金属材料焊接的破坏试验 熔焊接头中焊接金属的纵向拉伸试验 Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
EN 895-1995 金属材料焊接的破坏试验 横向抗拉试验 Destructive tests on welds in metallic materials - Transverse tensile test
EN 910-1996 金属材料焊接的破坏试验 弯曲试验 Destructive tests on welds in metallic materials - Bend tests
EN ISO 1071-2003 焊接消耗品　铸铁熔焊用药剂焊极、焊丝、焊条和管关芯焊极　分类　 Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2003)
EN ISO 10882-1-2001 焊接和相关工艺的卫生与安全　工作人员呼吸区域中空气中悬浮颗粒物及气体的取样　第1部分：空气中粒子取样 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operators breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2001)
EN ISO 10882-2-2000 焊接和相关工艺的卫生与安全　工作人员呼吸区域中空气中悬浮颗粒物及气体的取样　第2部分：气体取样 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operatiors breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)
EN ISO 13916-1996 焊接　预热温度、道间温度和预热维持温度测量的指南 Welding - Guidance for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996)
EN ISO 13918-1998 焊接　电弧螺栓焊用螺栓和陶瓷箍套 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998)
EN ISO 13919-1-1996 焊接　电子束和激光焊接头　缺陷的质量分级指南　第1部分：钢 Welding - Electrons and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996)
EN ISO 13919-2-2001 焊接　电子束和激光焊接头　缺陷的质量分级指南　第2部分：铝及其可焊合金 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001)
EN ISO 13920-1996 焊接　焊接结构的一般公差　长度和角度的尺寸　形状和位置 Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996)
EN ISO 14114-1999 气焊设备　焊接、切割及相关工艺用的乙炔汇流系统　一般要求 Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:1999)
EN ISO 14329-2003 电阻焊接　焊缝的破环性检验　电阻点焊、缝焊和凸焊焊缝的疲劳类型和几何量测量 Resistance welding - Destructive test of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003)
EN ISO 14372-2001 焊接耗材　通过测量扩散氢方法测定手工电弧焊 焊条的抗湿性 Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000)
EN ISO 14554-1-2000 焊接质量要求　金属材料的电阻焊接　第1部分：完整质量要求 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2000)
EN ISO 14554-2-2000 焊接质量要求　金属材料的电阻焊接　第2部分：基本质量要求 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000)
EN ISO 14555-1998 焊接　金属材料的电弧螺栓焊 Welding - Arc stud welding of metallic materials (ISO 14555:1998)
EN ISO 14744-1-2000 焊接　电子束焊接机的验收检验　第1部分：原理和验收条件 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000)
EN ISO 14744-2-2000 焊接　电子束焊接机的验收检验　第2部分：加速电压特性的测量 Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000)
EN ISO 14744-3-2000 焊接　电子束焊接机的验收检验　第3部分：电子束电流特性的测量 Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000)
EN ISO 14744-4-2000 焊接　电子束焊接机的验收检验　第4部分：焊接速度的测量 Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000)
EN ISO 14744-5-2000 焊接　电子束焊接机的验收检验　第5部分：偏转精度的测量 Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000)
EN ISO 14744-6-2000 焊接　电子束焊接机的验收检验　第6部分：焊点位置稳定性的测量 Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000)
EN ISO 15011-1-2002 焊接和有关工艺中的卫生和安全　电弧焊产生的烟尘和气体取样的实验室方法　第1部分：颗粒烟尘分析取样和产 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1: Determination of emission rate and sampling for analysis of particulate fume (ISO 15011-1:2002)
EN ISO 15011-2-2003 焊接和有关工艺中的健康和安全　电弧焊产生的烟尘和气体取样的实验室方法　第2部分：除臭氧外、各种气体产 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2: Determination of emission rates of gases, except ozone (ISO 15011-2:2003)
EN ISO 15011-3-2002 焊接和有关工艺中的健康和安全　电弧焊产生的烟尘和气体取样的实验室方法　第3部分：在固定点测定臭氧浓度 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3: Determination of ozone concentration using fixed point measurements (ISO 15011-3:2002)
EN ISO 15609-2-2001 金属焊接工艺的规范和验收　焊接工艺规范　第2部分：气焊 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001)
EN ISO 15614-11-2002 金属焊接工艺的规范和验收　焊接工艺试验　第11部分：电子和激光束焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
EN ISO 15614-8-2002 金属焊接工艺的规范和验收　焊接工艺试验　第8部分：管对管板接头焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002)
EN ISO 15615-2002 气焊设备　焊接、切割及相关工艺用多种乙炔发生器　高压装置中的安全要求 Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2002)
EN ISO 15616-1-2003 　高质量焊接及切割用二氧化碳激光束机的验收试验　第1部分：一般原则、验收条件 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
EN ISO 15616-2-2003 高质量焊接及切割用二氧化碳激光束机的验收试验　第2部分：静止及动态精度的测量 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
EN ISO 15616-3-2003 高质量焊接及切割用二氧化碳激光束机的验收试验　第3部分：气流量及气压测量仪的校正 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
EN ISO 15618-1-2001 水下焊接的焊工资格认可试验　第1部分：超高压湿焊的潜水焊工 Qualification testing of welders for under-water welding - Part 1: Diver-welders for hyperbaric wet welding (ISO 15618-1:2001)
EN ISO 15618-2-2001 水下焊接的焊工资格认可试验　第2部分：超高压干焊的潜水员焊工和焊接操作员 Approval testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001)
EN ISO 15620-2000 焊接　金属材料的摩擦焊接 Welding - Friction welding of metallic materials (ISO 15620:2000)
EN ISO 15630-2-2002 钢筋混凝土和预应力混凝土用钢筋　试验方法　第2部分：焊接钢筋网 Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2002)
EN ISO 17652-1-2003 焊接　焊接和相关工艺车间底火的试验　第1部分：一般要求 Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003)
EN ISO 17652-2-2003 焊接　焊接和相关工艺车间底火的试验　第2部分：车间底火的焊接特性 Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003)
EN ISO 17652-3-2003 焊接　焊接和相关工艺车间底火的试验　第3部分：热切割 Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003)
EN ISO 17652-4-2003 焊接　焊接和相关工艺车间底火的试验　第4部分：焰气排放 Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003)
EN ISO 21670-2003 带凸缘的六角焊接螺母 Hexagon weld nuts with flange (ISO 21670:2003)
EN ISO 2503-1998+AC-1998 气焊设备　焊接、切割及相关工艺用300bar以下的气瓶调压器 Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (ISO 2503:1998)
EN ISO 3677-1995 软钎焊　硬钎焊和钎接焊接用填充金属　符号规定 Filler metal for soft soldering, brazing and braze welding - Designation (ISO 3677:1992)
EN ISO 3690-2000 焊接与相关工艺　在铁素体电弧焊金属中氢含量的测定 Welding and allied processes - Determination of hydrogen content in ferritic arc weld metal (ISO 3690:2000)
EN ISO 4063-2000 焊接和相关工艺　工艺名称和参照代码 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998)
EN ISO 5172-1996 焊接、切割及加热用手工焊炬规范和试验 Manual blowpipes for welding, cutting and heating - Specifications and tests (ISO 5172:1995, including Amendment 1:1995)
EN ISO 6520-1-1998 焊接和相关工艺　金属材料中几何缺陷的分类　第1部分：熔焊 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:1998)
EN ISO 6520-2-2001 焊接和相关工艺　金属材料中几何缺陷的分类　第2部分：压力焊接 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001)
EN ISO 6847-2001 焊接耗材　化学分析用焊接金属的熔敷 Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2000)
EN ISO 6947-1997 焊接　工作位置　倾角与转角的定义 Welds - Working positions - Definitions of angles of slope and rotation (ISO 6947:1993)
EN ISO 7291-2001 气焊设备　用于300bar以下的焊接、切割及相关工艺用汇流系统上的压力调节器 Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar (ISO 7291:1999)
EN ISO 8166-2003 电阻焊接 用固定机械设备评定点焊焊条寿命的程序 Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machines settings (ISO 8166:2003)
EN ISO 8205-1-2002 电阻焊接水冷次级线圈连接电缆　第1部分：双导体连接电缆的尺寸和要求 Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002)
EN ISO 8205-2-2002 电阻焊接水冷次级线圈连接电缆　第2部分：单根导线连接电缆的尺寸和要求 Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002)
EN ISO 8205-3-1996 电阻焊接水冷次级线圈连接电缆　第3部分：试验要求 Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:1993)
EN ISO 8249-2000 焊接　奥氏体和成双铁素体奥氏体镍－铬不锈钢焊接金属中铁素体数(FN)的测定 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000)
EN ISO 8434-4-2000 用于流体传动和一般用途的金属管接头　第4部分：带O形圈焊接接头体的24度锥形管接头 Metallic tube connections for fluid power and general use - Part 4: 24?degrees cone connectors with O-ring weld-on nipples (ISO 8434-4:1995)
EN ISO 9692-2-1998 焊接和相关工艺　接头的制备　第2部分：钢的埋弧焊 Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998)
EN ISO 9692-3-2001 焊接和相关工艺　接头制备的建议　第3部分：铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊　 Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000)
EN ISO 9692-4-2003 焊接和相关工艺　接头制备的建议　第4部分：复合钢 Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003)
EN ISO 9956-10-1996 金属材料焊接工艺规程及认可　第10部分：电子束焊接工艺规程 Specification and approval of welding procedures for metallic materials - Part 10: Welding procedure specification for electron beam welding (ISO 9956-10:1996)
EN ISO 9956-11-1996 金属材料焊接工艺规程及认可　第11部分：激光束焊接工艺规程 Specification and approval of welding procedures for metallic materials - Part 11: Welding procedure specification for laser beam welding (ISO 9956-11:1996)
ENV 10080-1995 混凝土加固用钢材 为适于焊接而加筋的混凝土钢B500 棒、 环盘 已焊过的钢筋网的交货技术条件 Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric / Note: Withdrawn by mistake
ENV 50184-1996 电弧焊接设备的确认 Validation of arc welding equipment (BS 7570:1992)
prEN 10025-3-2000 热轧结构钢制品　第3部分：正火/正火轧制可焊接细晶结构钢的交货技术条件 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
prEN 10080-5-1999 钢筋混凝土用钢材　可焊钢筋　第5部分：焊接钢筋网交货技术条件 Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 5: Technical delivery conditions for welded fabric
prEN 1011-7-2002 焊接 金属材料焊接的推荐规范 第7部分：电子束焊接 Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding
prEN 1011-8-2002 焊接 金属材料焊接的推荐规范 第8部分：铸铁焊接 Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons
prEN 10217-7-1998 压力用途的焊接钢管　交货技术条件　第7部分：不锈钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
prEN 10255-2002 适用于焊接和加工螺纹的非合金钢管　交货技术条件 Non-alloy steel tubes suitable for welding or threading - Technical delivery conditions
prEN 10296-2-2001 机械和一般工程用途的焊接钢管　交货技术条件　第2部分：不锈钢管 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes
prEN 10305-6-1999 高精密度用途的钢管　交货技术条件　第6部分：液压和气动系统用冷拔焊接钢管 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
prEN 1157-1993 焊接 工作位置 倾斜角和旋转角定义 Welds; working positions; definitions of angles of slope and rotation
prEN 13100-2-2002 热塑性塑料半成品焊接接头的无损检验 第2部分：X射线检查法 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing
prEN 13100-3-2002 热塑性塑料半成品焊接接头的无损检验 第3部分：超声检测 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 3: Ultrasonic testing
prEN 13479-2002 焊接耗材 耗材合格评定试验方法和质量要求 第1部分：主要方法和评价 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
prEN 13705-1999 热塑性塑料的焊接 热气流焊的机器和设备（包括挤压焊） Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding)
prEN 14015-1-2000 在环境温度和高于环境温度　用于储存液体　现场建造的　垂直圆柱形平底　地面焊接金属罐的设计和制造规范　 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, metallic tanks for the storage of liquids at ambient temperature and above - Part 1: Steel tanks
prEN 14208-2003 可运输气瓶 气体运输用容积达3000升的焊接气罐规范 设计和结构 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
prEN 14295-2003 焊接消耗品 高强度钢埋弧焊丝和管状药芯焊条与焊条、焊剂组件 分类 Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification
prEN 14448-2002 大规模生产中热塑性模塑料的热工具焊接 Heated tool welding of thermoplastics mouldings in mass production
prEN 2169-1981 航空航天系列 溶溶处理的耐热钢FE-PA91-HT 焊接环用棒材和型材 Heat resisting steel FE-PA91-HT, solution treated; bars and sections for welded rings; aerospace series
prEN 2237-1981 航空航天系列 经溶液处理和淀积处理的耐热钢 FE-PA91-HT 焊接环用棒材和型材 Heat resisting steel FE-PA91-HT, solution treated and precipitation treated; bars and sections for welded rings; aerospace series
prEN 288-10-1994 金属材料焊接程序规范和鉴定 第10部分：电子束焊的焊接程序规范 Specification and approval of welding procedures for metallic materials - Part 10: Welding procedure specification for electron beam welding
prEN 288-11-1994 金属材料焊接程序规范和鉴定 第11部分：激光束焊的焊接程序规范 Specification and approval of welding procedures for metallic materials - Part 11: Welding procedure specification for laser beam welding
prEN 288-12-1995 金属材料焊接程序规范和鉴定 第12部分：铸钢弧焊的焊接程序试验（ISO 9956-2:1995） Specification and approval of welding procedures for metallic materials - Part 12: Welding procedure tests for the arc welding of cast steels (ISO 9956-2:1995)
prEN 288-13-1995 金属材料焊接程序规范和鉴定 第13部分：铝和铸锻材料化合物弧焊的焊接程序试验 Specification and approval of welding procedures for metallic materials - Part 13: Welding procedure tests for the arc welding of aluminium and combinations of cast to wrought material (ISO 9956-3:1995)
prEN 3155-012-2000 航空航天系列 用在连接部件的电接点 第012部分：三轴的8号、D型焊接R级插塞电接点　产品标准 Aerospace series - Electrical contacts used in elements of connection - Part 012: Contacts, electrical, triaxial, size 8, male, type D, solder, class R; product standard
prEN 3155-013-2000 航空航天系列 用在连接部件的电接点 第013部分：三轴的8号、D型焊接R级塞孔电接点 产品标准 Aerospace series - Electrical contacts used in elements of connection - Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R; product standard
prEN 3155-039-2001 航空航天系列 用在连接部件的电接点　第039部分：同轴塞孔16号D型焊接R级电接点 产品标准 Aerospace series - Electrical contacts used in elements of connection - Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R; Product standard
prEN 3155-040-2001 航空航天系列 用在连接部件的电接点　第040部分：同轴12号插塞D型焊接R级电接点 产品标准 Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R; Product standard
prEN 3155-041-2001 航空航天系列 用在连接部件的电接点　第041部分：同轴12号塞孔D型焊接R级电接点　产品标准 Aerospace series - Electrical contacts used in elements of connection - Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R; Product standard
prEN 3155-058-2001 航空航天系列 用在连接部件的电接点　第058部分：同轴的16号插塞D型焊接R级电接点　产品标准/注：与EN 315 Aerospace series - Electrical contacts used in elements of connection - Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R; Product standard / Note: Applies in conjunction with EN 3155-001
prEN 3155-059-2001 航空航天系列 用在连接部件的电接点　第059部分：同轴16号塞孔D型焊接R级电接点　产品标准/注：与EN 3155- Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R; Product standard / Note: Applies in conjunction with EN 3155-001
prEN 3155-060-2001 航空航天系列 用在连接部件的电接点　第060部分：同轴12号插塞D型焊接R级电接点　产品标准/注：与EN 3155- Aerospace series - Electrical contacts used in elements of connection - Part 060: Contacts, electrical, coaxial, size 12, male, type D, solder, class R; Product standard / Note: Applies in conjunction with EN 3155-001
prEN 3155-061-2001 航空航天系列 用在连接部件的电接点　第061部分：同轴12号塞孔D型焊接R级电接点　产品标准/注：与EN 3155- Aerospace series - Electrical contacts used in elements of connection - Part 061: Contacts, electrical, coaxial, size 12, female, type D, solder, class R; Product standard / Note: Applies in conjunction with EN 3155-001
prEN 3646-007-2001 航空航天系列　连续操作温度175 ℃或 200℃、圆形卡口式联结电连接器　第007部分：、密封的焊接或铜焊圆法 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175℃ or 200℃ continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting; Product standard
prEN 3716-003-1998 航空航天系列　数字数据传输用具有三线接口的单路连接器　第００３部分：焊接插座　产品标准 Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard
prEN 3716-004-1998 航空航天系列　数字数据传输用具有三线接口的单路连接器　第００４部分：焊接插头　产品标准 Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard
prEN 61193-5-1999 软焊接　第5部分：印制电路板组件缺陷的登记和分析 IEC 61193-5: Soft soldering - Part 5: Registration and analysis of defects on printed board assemblies
prEN 630-1992 铝及其焊接合金中的电弧焊接头 缺陷质量级别指南 Arc-welded joints in aluminium and its weldable alloys; guidance on quality levels for imperfections (ISO/DIS 10042 modified)
prEN 756-2003 焊接消耗品 非合金和细精粒钢埋弧焊用实心、空心焊条和电焊剂混合物 分类 Welding consumables - Solid wire, tubular cored electrodes and electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification / Note: Intended as replacement for EN 756 (1995-10).
prEN ISO 11611-2003 焊接及相关工艺用防护服 Protective clothing for use in welding and allied processes (ISO/DIS 11611:2003)
prEN ISO 14172-2003 焊接消耗材料　镍及镍合金手工金属电弧焊用涂剂焊条　分类 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO/FDIS 14172:2003)
prEN ISO 15012-1-2000 焊接和有关工艺中的健康和安全　空气过滤设备的要求、试验和标记　第1部分：焊接烟尘分离效率的试验　 Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 1: Testing of the separation efficiency for welding fume (ISO/DIS 15012-1:2000)
prEN ISO 15012-2-2000 焊接和有关工艺中的健康和安全　空气过滤设备的要求、试验和标记　第2部分：焊接烟尘排放装置的安装部位的 Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Testing of the capture zone of welding fume extraction devices (ISO/DIS 15012-2:2000)
prEN ISO 15607-2003 金属焊接工艺的规范及验收　一般规则 Specification and qualification of welding procedures for metallic materials - General rules (ISO/FDIS 15607:2003)
prEN ISO 15609-1-2000 金属焊接工艺的规范和验收　焊接工艺规范　第1部分：电弧焊 Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO/DIS 15609-1:2000)
prEN ISO 15609-3-2000 金属焊接工艺的规范和验收　焊接工艺规范　第3部分：电子束焊 Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding (ISO/DIS 15609-3:2000)
prEN ISO 15609-4-2000 金属焊接工艺的规范和验收　焊接工艺规范　第4部分：激光束焊 Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO/DIS 15609-4:2000)
prEN ISO 15609-5-2000 金属焊接工艺的规范和验收　焊接工艺规范　第5部分：电阻焊 Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO/DIS 15609-5:2000)
prEN ISO 15610-2003 金属焊接工艺的规范和验收　用经批准的焊接消耗材料验收 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO/FDIS 15610:2003)
prEN ISO 15611-2003 金属焊接工艺的规范和验收　用焊接经验进行验收 Specification and qualification of welding procedures for metallic materials - AQualification based on previous welding experience (ISO/FDIS 15611:2003)
prEN ISO 15612-2000 金属焊接工艺的规范和验收　用标准焊接工艺进行验收 Specification and approval of welding procedures for metallic materials - Approval by a standard welding procedure (ISO/DIS 15612:2000)
prEN ISO 15613-2003 金属焊接工艺的规范和验收　用试生产试验进行验收 Specification and qualification of welding procedure for metallic materials - Qualification based on pre-production welding test (ISO/FDIS 15613:2003)
prEN ISO 15614-1-2003 金属焊接工艺的规范和验收　焊接工艺试验　第1部分：钢的电弧焊和气焊及镍和镍合金的焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/FDIS 15614-1:2003)
prEN ISO 15614-10-2000 金属焊接工艺的规范和验收　焊接工艺试验　第10部分：超基干焊 Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbasic dry welding (ISO/DIS 15614-10:2000)
prEN ISO 15614-12-2000 金属焊接工艺的规范和验收　焊接工艺试验　第12部分：点焊、缝焊及凸焊 Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, sean and projection welding (ISO/DIS 15614-12:2000)
prEN ISO 15614-2-2000 金属焊接工艺的规范和验收　焊接工艺试验　第2部分：铝及其合金的电弧焊 Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2000)
prEN ISO 15614-5-2003 金属焊接工艺的规范和验收　焊接工艺试验　第5部分：钛、锆及其合金的电弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/FDIS 15614-5:2003)
prEN ISO 15614-9-2000 金属焊接工艺的规范和验收　焊接工艺试验　第9部分：水下超基湿焊 Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 9: Underwater hyperbasic wet welding (ISO/DIS 15614-9:2000)
prEN ISO 17660-2002 钢筋的焊接 Welding of reinforcing steel (ISO/DIS 17660:2002)
prEN ISO 17662-2001 焊接　包括辅助加工在内的焊接设备的校正、鉴定及确认 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO/DIS 17662:2001)
prEN ISO 18273-2003 焊接消耗材料　铝及铝合金电弧焊用丝状电极、焊丝和焊条　分类 Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO/FDIS 18273:2003)
prEN ISO 18274-2003 焊接消耗材料　镍及镍合金电弧焊用丝状及带状电极、焊丝和焊条　分类 Welding consumables - Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys - Classification (ISO/FDIS 18274:2003)
prEN ISO 544-2003 焊接消耗品　焊接填缝金属的交货技术条件　产品型号、　尺寸、　公差和标记 Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and markings (ISO/FDIS 544:2003)
prEN ISO 5817-2003 焊接　钢、镍、钛与其合金熔化焊接接合　不理想性质量级别 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO/FDIS 5817:2003)
prEN ISO 9692-1-2003 焊接和相关工艺　接头制备的推荐工艺　第1部分：钢的人工电弧焊、气体保护金属电弧焊、气焊和束焊　 Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO/FDIS 9692-1:2003)
编号 中文名称 英文名称
返回