| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 103-7-1972 | ISO 米制梯形螺纹.标称直径8～100mm螺栓螺纹的极限尺寸 | ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter |
| DIN 103-8-1972 | ISO 米制梯形螺纹.标称直径105至300mm螺栓螺纹的极限尺寸 | ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter |
| DIN 11014-1968 | 农业机械.米制螺纹、精制沉头双接口螺栓 | Agricultural equipment; countersunk double-nip bolts, sinkings, metric thread, finish |
| DIN 11015-1995 | 农业机械.带短四角方凸台的扁平埋头螺栓 | Agricultural machinery - Flat countersunk square neck bolts with short square |
| DIN 11028-1999 | 农业用拖拉机和机械..拖车联轴节.40联接环用螺栓联轴节 | Agricultural tractors and machinery - Trailer coupling - Bolt coupling for coupling-ring 40 |
| DIN 1211-3-2003 | 错列人孔阶梯脚扣.第3部分:螺栓连接的阶梯脚扣 | Step irons for staggered manhole steps - Part 3: Bolted-on step irons |
| DIN 1212-3-2003 | 错列人孔直立式阶梯脚扣.第3部分:螺栓连接的阶梯脚扣 | Step irons with upstand for staggered manhole steps - Part 3: Bolted-on step irons |
| DIN 1441-1974 | 螺栓用粗制垫圈 | Washers; Type Coarse for Bolts |
| DIN 1595-1978 | 有轨车辆的按钮和按钮螺栓 | Knobs and knobbed screws for rail vehicles |
| DIN 18069-1985 | 住宅的装有承载螺栓的楼梯.设计和建造 | Stairs with load-bearing bolts for residential buildings; design and execution |
| DIN 186-1988 | 带方颈部的T形头螺栓 | T-head bolts with square neck |
| DIN 188-1987 | 带双凸边的T形头螺栓 | T-head bolts with double nib |
| DIN 20625-1-1992 | 矿山用轨控轨道装置.绳索牵引和自行式轨道装置用螺栓联轴器.螺栓联轴器30 | Capture-track rail installations in mining; bolted couplings for rope-hauled and self-propelled rail installations; bolted coupling 30 |
| DIN 21319-1989 | 矿山坑道用圆木.螺栓 | Round pit timber; bolts |
| DIN 21346-1989 | 导轴用的四方头螺栓 | Square head bolts for shaft guides |
| DIN 22412-1986 | 有槽螺栓 | Slit-bolts |
| DIN 22416-1986 | 采矿用于预防潜在爆炸环境爆的电气设备.三角头螺栓.安全性要求和试验 | Electrical apparatus for potentially explosive atmospheres in mining; triangular head bolts; safety requirements and testing |
| DIN 22424-1990 | 矿山预防潜在性爆炸气体的电气设备.三角头螺栓 | Electrical apparatus for potentially explosive atmospheres for mining; triangle head bolts |
| DIN 24536-1985 | 炼钢厂和轧钢机用设备.在技术图纸上带锚盒的地脚螺栓和T 型头螺栓的图形符号 | Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings |
| DIN 24539-1-1985 | 冶金和轧钢设备.按DIN261的T型头螺栓用锚板.单块锚板.尺寸、名称、安装深度 | Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; single anchor plates; dimensions, designations, mounting depth |
| DIN 24539-2-1985 | 冶金和轧钢设备.按DIN261的T 型头螺栓用锚板.双锚板.尺寸、名称、安装深度 | Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth |
| DIN 2510-1 Bb.-1974 | 带减缩刀柄的螺栓连接件的测量和安装.第7部分:螺栓连接件计算的相关研究 | Bolted connections with reduced shank, survey and installation; studies relating to the calculation of bolted connections |
| DIN 2510-1-1974 | 带减缩刀柄的螺栓连接件.第1部分:综述.应用范围和安装示例 | Bolted Connections with Reduced Shank; Survey, Range of Application and Examples of Installation |
| DIN 2510-2-1971 | 带缩径杆的螺栓连接件.带大间隙的米制螺纹.标称尺寸和极限尺寸 | Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits |
| DIN 2510-3-1971 | 带缩径杆的螺栓连接件.双头螺柱 | Bolted Connections with Reduced Shank; Stud-bolts |
| DIN 2510-4-1971 | 带缩径杆的螺栓连接件.螺柱 | Bolted Connections with Reduced Shank; Studs |
| DIN 2510-5-1971 | 带缩径杆的螺栓连接件.六角螺母 | Bolted Connections with Reduced Shank; Hexagon Nuts |
| DIN 2510-6-1974 | 带减缩刀柄的螺栓连接件.第8部分:螺母 | Bolted Connections with Reduced Shank; Cap Nuts |
| DIN 2510-7-1971 | 带减缩刀柄的螺栓连接件.第7部分:延伸式套管 | Bolted Connections with Reduced Shank; Extension Sleeves |
| DIN 2510-8-1971 | 带缩径杆的螺栓连接件.螺杆用的螺纹孔 | Bolted Connections with Reduced Shank; Threaded Holes for Studs |
| DIN 25192-1978 | 铁路车辆用T 形头螺栓锤头螺栓） | T-head bolts (hammer head bolts) for railway vehicles |
| DIN 25193-2003 | 铁路车辆.带ISO米制螺纹的菌头地脚螺栓.C级 | Railway vehicles - Mushroom head anchor screws with metric ISO thread - Class C |
| DIN 25195-2003 | 铁路车辆.带ISO米制螺纹的双接口沉头螺栓.C级 | Railway vehicles - Countersunk bolts with double nip with metric ISO thread - Class C |
| DIN 25200-1997 | 铁路车辆用螺钉、螺栓和螺母.一览表 | Screws, bolts and nuts for rail vehicles - Summary |
| DIN 25201-1-2004 | 铁路车辆及其组件的设计指南.螺栓连接.第1部分:螺栓连接的分类 | Design guide for railway vehicles and their components - Bolted joints - Part 1: Classification of bolted joints |
| DIN 25201-2 Berichtigung 1-2007 | 铁道车辆及其组件的设计指南.螺栓连接.第2部分:设计.机械应用.DIN 25201-2:2006-04的勘误 | Design guide for railway vehicles and their components - Bolted joints - Part 2: Design - Mechanical application, Corrigenda to DIN 25201-2:2006-04 |
| DIN 25201-2-2006 | 铁路车辆及其组件的设计指南.螺栓连接.第2部分:设计.机械应用 | Design guide for railway vehicles and their components - Bolted joints - Part 2: Design - Mechanical application |
| DIN 25201-3-2004 | 铁路车辆及其组件的设计指南.螺栓连接.第3部分:设计.电气应用 | Design guide for railway vehicles and their components - Bolted joints - Part 3: Design - Electrical application |
| DIN 25201-4-2004 | 铁路车辆及其组件的设计指南.螺栓连接.第4部分:螺栓连接的安全 | Design guide for railway vehicles and their components - Bolted joints - Part 4: Securing of bolted joints |
| DIN 25201-5-2005 | 铁路车辆及其组件的设计指南.螺栓连接.第5部分:防腐蚀 | Design guide for railway vehicles and their components - Bolted joints - Part 5: Protection against corrosion |
| DIN 25201-6-2005 | 铁路车辆及其组件的设计指南.螺栓连接.第6部分:连接尺寸 | Design guide for railway vehicles and their components - Bolted joints - Part 6: Connecting dimensions |
| DIN 25201-7 Berichtigung 1-2007 | 铁路车辆及其组件的设计指南.螺栓连接件.第7部分:安装.DIN 25201-7-2004技术勘误 | Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation, Corrigenda to DIN 25201-7:2004-06 |
| DIN 25201-7-2004 | 铁路车辆及其组件的设计指南.螺栓连接.第7部分:安装 | Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation |
| DIN 26029-1-1986 | 槽车.排气孔和闭锁螺栓.底部压气卸载槽车 | Tank wagons; vent holes and drain plugs on pressurized gas tank wagons with bottom discharge |
| DIN 26029-2-1986 | 槽车.排气孔和闭锁螺栓.倾斜罐槽车 | Tank wagons; vent holes and drain plugs on tank wagons with indined tanks |
| DIN 261-1987 | T形头螺栓 | T-head bolts |
| DIN 267-13-2007 | 紧固件.技术规范.第13部分:在-200℃～700℃温度范围使用的具有特殊机械性能螺栓连接件用部件 | Fasteners - Technical specifications - Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C |
| DIN 267-26-2005 | 紧固件.技术规范.第26部分:螺栓连接件用锥形弹簧垫圈 | Fasteners - Technical specifications - Part 26: Conical spring washers for bolted connections |
| DIN 267-27-2004 | 紧固件.带粘附层的钢制螺钉、螺栓和螺柱技术规范 | Fasteners - Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications |
| DIN 267-28-2004 | 紧固件.第28部分:带压紧层的钢制螺钉、螺栓和螺柱.技术规范 | Fasteners - Part 28: Steel screws, bolts and studs with locking coating; Technical specifications |
| DIN 267-29-1993 | 紧固件.在-200℃～+700℃温度范围使用的螺栓连接件的产品等级 | Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C |
| DIN 28602-2000 | 球墨铸铁管及管件.栓接压盖密封接头.组件、套管、中间环、密封圈、螺栓和螺母 | Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts |
| DIN 29732-3-1984 | 航空航天.带凸头的单向剪切钛合金紧公差螺栓用静载荷铆接计算值 | Aerospace; rivet calculation-values, static load, for close tolerance bolts of titanium alloy, with protruding head, single shear |
| DIN 29733-3-1984 | 航空航天.沉头的单向剪切钛合金紧公差螺栓用静载荷铆接计算值 | Aerospace; rivet calculation values, static load, for close tolerance bolts of titanium alloy, with countersunk head, single shear |
| DIN 3017-3-2002 | 软管卡箍.第3部分:螺栓卡箍 | Hose clamps - Part 3: Bolt clamps |
| DIN 34800-2005 | 带小凸缘的外六角驱动的螺栓和螺钉 | Bolts and screws with external hexalobular driving feature with small flange |
| DIN 34801-1999 | 大凸缘六角头驱动螺栓及螺钉 | Bolts and screws with external hexalobular driving feature with large flange |
| DIN 34803-2001 | 螺栓、螺钉和双头螺栓开口销与线孔 | Split pin holes and wire holes for bolts, screws and studs |
| DIN 34824-2007 | 螺栓和螺钉用12孔座 | 12 point socket for bolts and screws |
| DIN 37082-1975 | 制动踢片的调节装置.弹簧螺栓的压力弹簧. | Adjusting Equipment for Brake Blocks; Compression Springs, Spring Bolt |
| DIN 3853-2001 | 非钎焊和钎焊压合接头.与管接螺母使用的双头螺栓端部.设计图 | Non-soldering and soldering compression fittings - Stud ends for use with union nut; Design sheet |
| DIN 3903-2001 | 带有切割环的非焊接压缩配件.带锥形螺纹末端的肘形螺栓(不用于新设计) | Non soldering compression fittings with cutting ring - Elbow stud with taper threaded stud end (not for new design) |
| DIN 3906-2001 | 带有切割环的非焊接压缩配件.带锥形螺纹末端的分支T形螺栓(不用于新设计) | Non soldering compression fittings with cutting ring - Branch T-stud with taper threaded stud end (not for new design) |
| DIN 3913-2001 | 带有切割环的非焊接压缩配件.带锥形螺纹末端的活动T形螺栓(不用于新设计) | Non soldering compression fittings with cutting ring - Run T-stud with taper threaded stud end (not for new design) |
| DIN 3955-2001 | 带切割环的非钎焊压合接头.柱螺栓端A型带平行螺纹和轴杆的双头螺栓连接端 | Non-soldering compression fittings with cutting ring - Double ended stud ends with parallel threads and shaft for stud ends type A |
| DIN 43043-2-1971 | 电动机械用带3个螺栓双夹紧刷握.主要尺寸 | Double clamping brush-holder with 3 bolts for electrical machinery; main dimensions |
| DIN 43119-1-1981 | 第1部分:架空器材接触线夹用旋转式螺栓 | Revolving bolts for contact wire clamp for overhead equipment |
| DIN 43119-2-1983 | 架空设备的接触导线用旋转螺栓.带螺纹的旋转螺栓 | Revolving bolts for contact wire clamp for overhead equipment; revolving bolts with thread |
| DIN 43142-1976 | 螺栓、有槽接触线用接触线夹 | Contact wire clamps for screwbolts, for grooved contact wire |
| DIN 43144-1976 | 旋转螺栓、有槽接触线用接触线夹 | Contact wire clamps for revolving bolts, for grooved contact wire |
| DIN 43167-2-1987 | 工作电压为交流1000V以下、直流1500V以下架空接触线用棒式绝缘子.帽、U型螺栓和钩头螺栓 | Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; caps, u-bolts and hook bolt |
| DIN 43675-1-1975 | 第1部分:变压器用额定值在 400 和 3150 A 之间的连接螺栓和电压小于 60 kV 穿墙套管的矩形断面连接器 | Rectangular-section connectors for terminal studs rated between 400 and 3150 A for power transformer- and wallbushings below 60 kV |
| DIN 43675-2-1984 | 柱螺栓用连接件.户外变压器套管的扁连接件.Um24和36KV.5和8kA | Connectors for terminal studs; flat connectors for outdoor transformer bushings; U<(Index)m> 24 and 36 kV, 5 and 8 kA |
| DIN 43675-3-1975 | 第3部分:交流发电机套管额定值大于 3150 A 的连接螺栓用矩形断面连接器 | Rectangular-section connectors for terminal studs rated over, 3150 A, for alternator-bushings |
| DIN 43854-1979 | 电度表的铅封螺栓 | Sealing bolts for watthour meters |
| DIN 444-1983 | 吊环螺栓 | Eyebolts |
| DIN 46008-1987 | 接地连接螺栓的扁平接触表面.额定电压不超过52KV | Flat contact surfaces for earthing screws; rated voltage not exceeds 52 kV |
| DIN 46200-1977 | １·６ＫＡ以下导电连接螺栓.电流强度的设计和给定 | Current carrying connection bolts up to 1600 A; design and assignment of current intensities |
| DIN 4626-1986 | 叠层簧中心螺栓 | Center bolts for laminated leaf springs |
| DIN 46260-1-1988 | 低压用螺栓接线柱.第1部分:组装 | Low-voltage stud-terminals; compilation |
| DIN 46260-2-1988 | 低压用螺栓接线柱.第2部分:零件清单 | Low-voltage stud-terminals; part list |
| DIN 46262-1-1988 | 低压用螺栓接线柱.第1部分:绝缘子 | Low-voltage stud-terminals; insulators |
| DIN 46262-2-1988 | 低压用螺栓接线柱.第2部分:套管螺栓 | Low-voltage stud-terminals; bushing studs |
| DIN 46262-4-1988 | 低压用螺栓接线柱.第4部分:开口环、.钩环、垫圈、垫片 | Low-voltage stud-terminals; snap rings, shackles, washers, shims |
| DIN 46295-1-1985 | 带６个开口螺栓的矩形接线板.主要尺寸 | Terminal board, square shaped with six slit-bolts; main dimensions |
| DIN 46295-2-1981 | 带６个开口螺栓的矩形接线板.附件 | Terminal board, square shaped with six slit-bolts; accessories |
| DIN 46295-3-1981 | 带有６个开口螺栓的矩形端子板.电缆端头 | Terminal board, square shaped with six slit-bolts; cable sockets |
| DIN 46300-1980 | 安装器材.把电度表和控制装置安装在表盘上用螺栓 | Mounting material; mounting bolt for electric meters and controlgear on meter panels |
| DIN 475-1-1984 | 第1部分:螺栓、螺钉、阀门和配件用扳手开口度 | Widths across flats for bolts, screws, valves and fittings |
| DIN 478-1985 | 方头带肩螺栓 | Square head bolts with collar |
| DIN 479-1985 | 短螺栓末端的圆柱轴颈止端的方头螺栓 | Square head bolts with short dog point |
| DIN 480-1985 | 带肩和半圆柱轴颈止端的方头螺栓 | Square head bolts with collar and oval half dog point |
| DIN 48065-3-1980 | 架空线路的连接螺栓用带保护装配连接件的球形环 | Ball eyes with protective fitting attachment, for connection bolts, for overhead power lines |
| DIN 48073-1975 | 架空电力线的连接螺栓 | Connecting bolts for overhead power lines |
| DIN 48078-1-1985 | 耦合到搭接线侧连接螺栓的架空线用U形搭接线 | Clevis straps for overhead lines, for coupling to connecting bolts on the strap side |
| DIN 48078-2-1985 | 耦合到搭接线侧U形螺栓的架空线用U形搭接线 | Clevis straps for overhead lines, for coupling to U-bolts on the strap side |
| DIN 48088-2-1985 | 接地的接点和短路设备.连接接地一边带环型槽圆柱形螺栓 | Connecting point for earthing and short-circuiting devices; cylinder bolt and annuar slot for earth-side connection |
| DIN 48351-2-1967 | A形天线杆.第2部分:螺栓、螺母、垫圈 | A-masts; bolts, nuts, washers |
| DIN 529-1986 | 砖石工程和地基用螺栓 | Masonry and foundation bolts |
| DIN 580-2003 | 有眼螺栓 | Eye bolts |
| DIN 58460-1978 | 精密机械用柱螺栓 | Studs for fine mechanics |
| DIN 58461-1978 | 精密机械用带颈柱螺栓 | Studs with rim for fine mechanics |
| DIN 58462-1978 | 精密机械用带槽柱螺栓 | Studs with groove for fine mechanics |
| DIN 58463-1978 | 精密机械用带颈和槽的柱螺栓 | Studs with rim and groove for fine mechanics |
| DIN 58464-1978 | 精密机械用有头柱螺栓 | Studs with head for fine mechanics |
| DIN 58469-1978 | 精密机械用带螺纹柱螺栓 | Studs with thread for fine mechanics |
| DIN 58471-1978 | 精密机械用带六角头螺纹和槽的柱螺栓 | Studs with hexagon, thread and groove for fine mechanics |
| DIN 58472-1978 | 精密机械用带头和螺纹的柱螺栓 | Studs with head and thread for fine mechanics |
| DIN 58520-1-1994 | 绘图仪器用螺钉.第1部分:T 型螺栓 | Screws for drawing instruments; part 1: T-bolts |
| DIN 603-1981 | 方颈扁圆头螺栓 | Mushroom head square neck bolts |
| DIN 604-1981 | 平沉头尖螺栓 | Flat countersunk nib bolts |
| DIN 605-1981 | 平沉头长方颈螺栓 | Flat countersunk square neck bolts, with long square |
| DIN 607-1981 | 半圆头尖螺栓 | Cup head nib bolts |
| DIN 608-1981 | 平沉头短方颈螺栓 | Flat countersunk square neck bolts, with short square |
| DIN 609-1995 | 六角头长螺纹配合螺栓 | Hexagon fits bolts with long thread |
| DIN 6304-2002 | 带固定卡式螺栓的定位销钉 | Tommy screws with fixed clamping bolt |
| DIN 6305-2002 | 带固定卡式螺栓的螺丝旋杆螺母 | Tommy nuts with fixed clamping bolt |
| DIN 6306-2002 | 带移动卡式螺栓的定位销钉 | Tommy screws with movable clamping bolt |
| DIN 6307-2002 | 带移动卡式螺栓的螺丝旋杆螺母 | Tommy nuts with movable clamping bolt |
| DIN 65110-1984 | 航空和航天.螺钉和螺栓的十二角头 | Aerospace; bihexagonal heads for screws and bolts |
| DIN 65115-1986 | 航空和航天.带MJ螺纹、缩颈、标称抗拉强度1100MPa、温度235 ℃以下 、钢制六角头螺栓 | Aerospace; hexagon bolts with waisted shank and MJ thread, steel nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65121-1992 | 航空航天.螺栓、螺钉、螺母和有关零件.供车间查看的产品一览表和选用.不适用于新设计 | Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design |
| DIN 65177-1986 | 航空和航天.带MJ螺纹、缩颈、标称抗拉强度1100MPa、温度315 ℃以下 、钛合金制六角头螺栓 | Aerospace; hexagon bolts with waisted shank and MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperature up to 315 °C |
| DIN 65179-1993 | 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制短螺纹长度MJ螺纹带内补偿十字形筋状传动结构的 | Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65265-1998 | 航空航天.钛合金制螺纹接近顶部的MJ螺纹六角头螺栓.使用温度315℃及其以下，公称抗拉强度1100MPa | Aerospace - Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65268-1986 | 航空和航天.MJ 螺纹、短螺纹、钛合金制、温度315℃以下、标称抗拉强度1100MPa 六角头螺栓. | Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65313-1987 | 航空航天.公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制全螺纹的MJ螺纹的带有筋状翼形的扭矩调节盘 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65314-1998 | 航空和航天.钢制短螺纹长度MJ螺纹的带内补偿十字槽筋状传动机构的紧公差沉头螺栓.使用温度235℃及其以下， | Aerospace - Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, steel - Nominale tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65316-1993 | 航空航天.使用温度425℃以下公称抗拉强度1100MPa的耐蚀钢制短螺纹长度MJ螺纹带内补偿十字形筋状传动结构的 | Aerospace; countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65318-1987 | 航空航天.公称抗拉强度1100MPa使用温度为235℃以下的钢制短长度MJ螺纹的带有筋状翼形的扭矩调节十字槽头盘 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 °C |
| DIN 65319-1987 | 航空航天.公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制短长度MJ螺纹的带有筋状翼形的扭矩调节十字 | Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65320-1993 | 航空航天.使用温度235℃以下公称抗拉强度1100MPa的钢制短螺纹长度MJ螺纹带内补偿十字形筋状传动结构的紧公 | Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65324-1993 | 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制短长度MJ螺纹带内补偿十字形筋状传动结构的紧公 | Aerospace; pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65330-1987 | 航空航天.公称抗拉强度1100MPa使用温度为235℃以下的钢制短长度MJ螺纹的六角头螺栓. | Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65338-1993 | 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制带肩的短长度MJ螺纹紧公差六角头螺栓 | Aerospace; hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65339-1998 | 航空航天.耐腐蚀钢制带短长度MJ螺纹的紧公差六角头螺栓.使用温度425℃及其以下，公称抗拉强度1100MPa | Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel - Nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65438-1993 | 航空航天.使用温度315℃以下公称抗拉强度1100MPa的钛合金制短螺纹长度的MJ螺纹紧公差十二角头螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65439-1984 | 航空和航天.MJ螺纹、紧公差、中等长度螺纹、钢制、标称抗拉强度1250MPa、温度235 ℃以下的十二角头螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1250 MPa, for temperatures up to 235 °C |
| DIN 65440-1984 | 航空和航天.带MJ螺纹、紧公差、中等长度螺纹、耐蚀钢制、标称抗拉强度1250MPa、温度315 ℃以下的十二角头螺 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in corrosion resisting steel, nominal tensile strength 1250 MPa, for temperatures up to 315 °C |
| DIN 65441-1984 | 航空和航天.带MJ螺纹、紧公差、中等长度螺纹、钢制、标称抗拉强度1550MPa、温度235 ℃以下的十二角头螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1550 MPa, for temperatures up to 235 °C |
| DIN 65442-1993 | 航空航天.使用温度315℃以下公称抗拉强度1550MPa耐蚀镍合金制中长等度MJ螺纹的紧公差十二角头螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with medium-length MJ thread, corrosion resisting nickel alloy; nominal tensile strength 1550 MPa, for temperatures up to 315 °C |
| DIN 65443-1984 | 航空和航天.带MJ螺纹、紧公差、中等长度螺纹、钢制、标称抗拉强度1800MPa、温度235 ℃以下的十二角头螺栓 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1800 MPa, for temperatures up to 235 °C |
| DIN 65515-1984 | 航空和航天.带内细齿和MJ螺纹、短螺纹、钛合金制、标称抗拉强度1100MPa、温度315℃以下凸圆头螺栓. | Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65516-1984 | 航空和航天.带内细齿和MJ螺纹、短螺纹、钢制、标称抗拉强度900MPa、温度235℃以下凸圆头螺栓. | Aerospace; cheese head bolts with internal serration thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65517-2002 | 航空航天.温度可达315℃的标称抗拉强度为1100MPa的钛合金短螺纹带内双六角和MJ螺纹的紧公差圆头螺栓 | Aerospace - Cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65523-1984 | 航空和航天.带MJ螺纹的、短螺纹、耐蚀钢制、标称抗拉强度700MPa、温度425℃以下的六角头螺栓 | Aerospace; hexagon bolts, with MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65524-1984 | 航空和航天.带MJ螺纹的、短螺纹、钢制、标称抗拉强度900MPa、温度235℃以下的六角头螺栓 | Aerospace; heaxagon bolts, with MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65525-1992 | 航空航天.使用温度235℃以下公称抗拉强度1100MPa 钢制MJ短螺纹的紧公差六角头螺栓 | Aerospace; bolts, hexagon, close tolerance, with MJ-thread, short thread, steel, nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65526-1998 | 航空航天.钛合金制带短长度MJ螺纹的紧公差六角头螺栓.使用温度315℃及其以下，公称抗拉强度1100MPa | Aerospace - Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy - Nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65527-1984 | 航空和航天.带MJ螺纹的、短螺纹、钢制、标称抗拉强1100MPa、温度235℃以下、紧公差六角头螺栓 | Aerospace; hexagon bolts, close tolerance, with MJ-thread, short thread, steel, nominal tensile stregth 1100 MPa, for temperatures up to 235 °C |
| DIN 65533-1987 | 航空航天.螺栓、螺钉和螺母.材料的分配及表面处理.推荐性选择 | Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection |
| DIN 65537-1987 | 航空航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制短长度MJ螺纹的带双六角套筒的凸圆头螺 | Aerospace; cheese head bolts with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65538-1987 | 航空和航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制短长度MJ螺纹的带双六角套筒的紧公差 | Aerospace; cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65541-1987 | 航空和航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制全攻螺纹的MJ螺纹的带有筋状翼形的扭 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65554-1987 | 航空航天.公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制短长度MJ螺纹的带有筋状翼形扭矩调节十字槽 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65555-1987 | 航空航天.公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制短长度MJ螺纹的六角头螺栓. | Aerospace; hexagon bolts with short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65736-1-1984 | 航空航天.材料1.1174.7和1.4544.9单向剪切沉头螺栓静载荷的螺栓计算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt materials 1.1174.7 and 1.4544.9 |
| DIN 65736-3-1984 | 航空和航天.材料1.7220.5单向剪切沉头螺栓静载荷的螺栓计算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.7220.5 |
| DIN 65736-5-1984 | 航空航天.材料1.4944.4和1.7734.5单向剪切沉头螺栓静载荷的螺栓计算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt materials 1.4944.4 and 1.7734.5 |
| DIN 65736-7-1984 | 航空航天.材料1.6604.6单向剪切沉头螺栓静载荷的螺栓计算值 | Aerospace; bolt calculation values, static load, for countersunk head bolts, single shear, bolt material 1.6604.6 |
| DIN 6796-1987 | 螺栓和螺母用螺旋弹簧垫圈 | Conical spring washers for bolt/nut assemblies |
| DIN 6917-1989 | “工”字形钢型材高强度螺栓连接用的方锥形垫圈 | Square taper washers for high-strength structural bolting of steel I sections |
| DIN 6918-1990 | 钢结构U型梁高强度螺栓连接用四角楔形垫圈 | Square taper washers for high-strength structual bolting of steel channel sections |
| DIN 70613-1989 | 汽车制造.小宽度扳手开口度六角头螺栓(不适于新结构) | Automotive engineering; hexagon head bolts with small widths across flats (not for new constructions) |
| DIN 7349-1974 | 带重型夹紧套的螺栓用平垫圈 | Plain Washers for Bolts with Heavy Clamping Sleeves |
| DIN 74051-1-1989 | 汽车和挂车的机械连接.自动螺栓联轴节40.尺寸和计算数据 | Mechanical connections between towing vehicles and trailers; automatic bolt coupling 40; dimensions and calculating data |
| DIN 74052-1-1989 | 牵引车和挂车的机械连接.第1部分:50 mm 自动螺栓联轴节的尺寸和计算数据 | Mechanical connections between towing vehicles and trailers; automatic bolt coupling 50; dimensions and calculating data |
| DIN 7424-1989 | 机器操作安装六角头螺栓用的带六角传动延伸部分的套筒板手 | Socket wrenches with hexagon drive extension for hexagon bolts, machine operated |
| DIN 74361-1-1989 | 汽车和挂车用辐板式车轮.第1部分:螺栓定心的连接尺寸 | Disc wheels for motor vehicles and trailers; connection dimensions for bolt centering |
| DIN 74361-2-1982 | 汽车和挂车的盘式车轮.柱螺栓定心的紧固件 | Disc wheels for motor vehicles and trailers; fasteners for stud centring |
| DIN 74362-1-1982 | 卡车及客车挂车用带有8个螺栓安装的车轮偏置盘用制动鼓.最大外廓 | Brake drums for offset disc wheels of truck and bus trailers with 8 bolt mounting; maximum outline |
| DIN 74362-10-1980 | 使用10个螺栓连接商用车辆及其挂车用插入式盘形车轮制动鼓.第10部分:最大外廓 | Brake drums for inset disk wheels of commercial vehicles and their trailers with 10 bolt fastening; maximum outline |
| DIN 74362-2-1982 | 卡车及客车挂车用带有10个螺栓安装的偏置盘式车轮用制动鼓.最大外廓 | Brake drums for offset disc wheels of truck and bus trailers with 10 bolt mounting; maximum outline |
| DIN 74362-3-1982 | 卡车及客车挂车用带有8个或10个螺栓安装的非偏置盘式车轮用制动鼓.最大外廓 | Brake drums for disc wheels without offset of truck and bus trailers with 8 or 10 bolt mounting; maximum outline |
| DIN 74362-4-1982 | 卡车及客车挂车用带有8个螺栓安装的偏置盘式车轮用制动鼓.最大外廓 | Brake drums for offset disc wheels of commercial vehicles with 8 bolt mounting; maximum outline |
| DIN 74362-5-1982 | 商业车辆用带有10个安装螺栓的偏置盘式车轮用制动鼓.最大外廓 | Brake drums for offset disc wheels of commercial vehicles with 10 bolt mounting; maximum outline |
| DIN 74362-6-1982 | 商业车辆用带有8个或10个安装螺栓的非偏置盘式车轮用制动鼓.最大外廓 | Brake drums for disc wheels without offset of commercial vehicles with 8 or 10 bolt mounting; maximum outline |
| DIN 74362-7-1987 | 轮辋直径标记15用6个或10个螺栓安装的非偏置盘式车轮用制动鼓.最大外廓 | Brake drums for disc wheels with rim diameter designation 15 without offset for 6 or 10 bolt mounting, maximum outline |
| DIN 74362-8-1987 | 轮辋直径标记15用6个或10个螺栓安装的偏置盘式车轮用制动鼓.最大外廓 | Brake drums for offset disc wheels rim diameter designation 15 for 6 or 10 bolt mounting; maximum outline |
| DIN 74363-1-1982 | 带有5个安装螺栓、节圆直径为112 mm (BZ 5 112)的客运挂车的制动鼓.最大外廓 | Brake drums for passenger car trailers with 5 bolt mounting and pitch circle dia. 112 mm (BZ 5 112); maximum outline |
| DIN 74363-2-1982 | 带有5个安装螺栓、节圆直径为120 mm (BZ 5 120)的客运挂车的制动鼓.最大外廓 | Brake drums for passenger car trailers with 5 bolt mounting and pitch circle dia. 120 mm (BZ 5 120); maximum outline |
| DIN 7644-1985 | 带球形衬的压接管接头.环形套管的插桩式鼓形螺栓 | Compression couplings with spherical liner; male studed banjo bolts for ring type nipples |
| DIN 78-2001 | 螺栓尾部的凸度 | Protrusions of bolt ends |
| DIN 787-2005 | T型槽用螺栓和螺钉 | Bolts and screws for T-slots |
| DIN 7968-2007 | 钢结构用带六角螺母的六角头配合螺栓 | Hexagon fit bolts with hexagon nut for steel structures |
| DIN 7969-2007 | 钢结构用带六角螺母的带槽沉头螺栓 | Slotted countersunk head bolts with hexagon nut for steel structures |
| DIN 797-1970 | 专用地脚螺栓 | Special Foundation Bolts |
| DIN 7990-2007 | 钢结构用带六角螺母的六角头螺栓 | Hexagon head bolts with hexagon nut for steel structures |
| DIN 7992-1970 | 大头T 形头螺栓 | T-head Bolts with Large Head |
| DIN 7999-1983 | 结构钢螺栓装配用的带大宽度对边的高强度六角头配合螺栓 | High strength hexagon fit bolts with large widths across flats for structural steel bolting |
| DIN 81421-1-1977 | 第1部分:螺栓连接式设备用带形把手 | Strap-shaped handles for equipment, type for bolted |
| DIN 81698-1973 | 吊环螺栓.米制螺纹 | Eye bolts; metric thread |
| DIN 835-1995 | 双头螺栓.旋入端（约）2d | Studs - Metal end 2 d |
| DIN 931-2-1987 | M 42 - M 160 x 6 的六角头螺栓.第2部分:产品等级 B | M 42 to M 160 × 6 hexagon head bolts; product grade B |
| DIN 938-1995 | 双头螺栓.旋入端（约）1d | Studs - Metal end 1 d |
| DIN 939-1995 | 双头螺栓.旋入端 （约）1.25d | Studs - Metal end 1,25 d |
| DIN 940-1995 | 双头螺栓.旋入端（约）2.5d | Studs - Metal end 2,5 d |
| DIN 949-1-1995 | 米制干涉配合螺纹MFS的双头螺栓.第1部分:旋合长度（约）2d(A型) | Studs with metric interference thread MFS - Part 1: Lengths of engagement 2 d (Type A) |
| DIN 949-2-1995 | 米制干涉配合螺纹MFS的双头螺栓.第2部分:旋合长度（约）2.5d(B型) | Studs with metric interference thread MFS - Part 2: Lengths of engagement 2,5 d (Type B) |
| DIN 95363-1994 | 弹性体固定件.A 型至 F 柱螺栓选固定件 | Elastomer mounts; stud mounts; types A to F |
| DIN 962-2001 | 螺栓、螺钉、双头螺栓和螺母.标识、型号和精整 | Bolts, screws, studs and nuts - Designation, types and finishes |
| DIN 974-2-1991 | 六角螺栓、螺钉和螺母用沉头孔直径.制造尺寸 | Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions |
| DIN 976-1-2002 | 螺栓.第1部分:米制螺纹 | Stud bolts - Part 1: Metric thread |
| DIN 976-2-1995 | 螺栓.第2部分:公制干涉螺纹 MFS | Stud bolts - Part 2: Metric interference thread MFS |
| DIN CEN/TS 1591-4-2007 | 法兰及其连接件.带垫圈圆形法兰连接件的设计原则.第4部分:服从压力设备指令按设备尺寸做的螺栓连接件装配职 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive; German version CEN/TS 1591-4:2007 |
| DIN EN 10319-2-2007 | 金属材料.拉伸应力松弛试验.第2部分:螺栓接合模型规程 | Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models; English version of DIN EN 10319-2:2007-01 |
| DIN EN 12051-1999 | 建筑五金.门窗用螺栓.要求和试验方法 | Building hardware - Door and window bolts - Requirements and test methods; German version EN 12051:1999 |
| DIN EN 13411-5-2003 | 钢丝绳端头.安全.第5部分:U形螺栓绳卡 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire grips; German version EN 13411-5:2003 |
| DIN EN 14219 Berichtigung 1-2007 | 带米制细距螺纹的六角法兰面螺栓.小型系列.DIN EN 14219-2003技术勘误 | Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified); German version EN 14219:2003, Corrigenda to DIN EN 14219:2003-09; German version EN 14219:2003/AC:2007 |
| DIN EN 14219-2003 | 米制细牙螺纹六角法兰面螺栓.小系列 | Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified); German version EN 14219:2003 |
| DIN EN 14399-1-2006 | 预加负荷用高强度结构螺栓组件.第1部分:一般要求 | High-strength structural bolting assemblies for preloading - Part 1: General requirements English version of DIN EN 14399-1:2006-06 |
| DIN EN 14399-2-2006 | 预加负荷用高强度结构螺栓组件.第2部分:预加负荷的适合性试验 | High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading English version of DIN EN 14399-2:2006-06 |
| DIN EN 14399-3-2006 | 预加负荷用高强度结构螺栓组件.第3部分:系统HR.六角螺栓和螺母组件 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies English version of DIN EN 14399-3:2006-06 |
| DIN EN 14399-4-2006 | 预加负荷用高强度结构螺栓组件.第4部分:系统HV.六角螺栓和螺母组件 | High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies English version of DIN EN 14399-4:2006-06 |
| DIN EN 14399-5-2006 | 预加负荷用高强度结构螺栓组件.第5部分:平垫圈 | High-strength structural bolting assemblies for preloading - Part 5: Plain washers (includes AC:2006) English version of DIN EN 14399-5:2006-06 |
| DIN EN 14399-6-2006 | 预加负荷用高强度结构螺栓组件.第6部分:普通倒角垫圈 | High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers (includes Corrigendum AC:2006) English version of DIN EN 14399-6:2006-06 |
| DIN EN 1450-1999 | 塑料管道系统.玻璃纤维增强的热固塑料部件(GFK).对采用螺栓固定的法兰连接点的设计进行验证的试验方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints (includes amendment A1:1998); German version EN 1450:1996 + A1:1998 |
| DIN EN 15048-1-2007 | 非预加载荷结构螺栓连接组件.第1部分:一般要求 | Non-preloaded structural bolting assemblies - Part 1: General requirements; German version EN 15048-1:2007 |
| DIN EN 15048-2-2007 | 非预加负荷结构的螺栓连接组件.第2部分:适宜性试验 | Non-preloaded structural bolting assemblies - Part 2: Suitability test; German version EN 15048-2:2007 |
| DIN EN 1515-1-2000 | 法兰及其连接件.螺栓连接.第1部分:螺栓连接的选择 | Flanges and their joints - Bolting - Part 1: Selection of bolting; German version EN 1515-1:1999 |
| DIN EN 1515-2-2002 | 法兰及其连接件.螺栓连接.第2部分:钢法兰用螺栓材料分类.PN标识; 德文版本 EN 1515-2:2001 | Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated; German version EN 1515-2:2001 |
| DIN EN 1515-3-2005 | 法兰及其连接件.螺栓连接.第3部分:等级标注的钢法兰用螺栓材料的分类.德文版本 EN 1515-3-2005 | Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated; German version EN 1515-3:2005 |
| DIN EN 15282-2007 | 釉瓷和搪瓷.水或市政和工业废水及污水的储存或处理用螺栓连接钢罐的设计 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges; German version EN 15282:2007 |
| DIN EN 1662 Berichtigung 1-2007 | 带法兰的六角螺栓、小型系列.DIN EN 1662-1998技术勘误 | Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997, Corrigenda to DIN EN 1662:1998-02; German version EN 1662:1997/AC:2007 |
| DIN EN 1662-1998 | 小系列带法兰的六角头螺栓 | Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997 |
| DIN EN 1665 Berichtigung 1-2007 | 带法兰的六角螺栓.重型系列.DIN EN 1665-1998技术勘误 | Hexagon bolts with flange, heavy series; German version EN 1665:1997, Corrigenda to DIN EN 1665:1998-11; German version EN 1665:1997/AC:2007 |
| DIN EN 1665-1998 | 重系列带法兰的六角螺栓 | Hexagon bolts with flange, heavy series; German version EN 1665:1997 |
| DIN EN 20273-1992 | 紧固件.螺栓和螺钉的间隙孔(ISO 273-1979) | Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991 |
| DIN EN 20898-7-1995 | 紧固件的机械性能.第7部分:公称直径为 1 mm - 10 mm 的螺栓和螺钉的扭力试验和最小扭矩 (ISO 898-7:1992); | Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995 |
| DIN EN 24015-1991 | 缩小钉杆的六角螺栓(杆直径≈螺纹中径).产品等级B(ISO 4015-1979) | Hexagon head bolts with reduced shank (shank diameter pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991 |
| DIN EN 2413-1995 | 航空航天系列.镀镉合金钢短螺纹紧公差薄头六角肩形螺栓.等级:1100MPa(室温)/235℃; 德文版本 EN 2413:1995 | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2413:1995 |
| DIN EN 2549-2007 | 航空航天系列.加 MoS<下标2> 润滑剂的阳极氧化钛合金短螺纹公称六角紧公差螺栓.等级:1100MPa(室温)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 2549:2006 |
| DIN EN 26157-1-1991 | 紧固件.表面缺陷.符合一般要求的螺栓、螺钉和螺柱(ISO 6157-1-88) | Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991 |
| DIN EN 26157-3-1991 | 紧固件.表面缺陷.特殊要求用螺栓、螺钉和螺柱 | Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991 |
| DIN EN 2859-1995 | 航空航天系列.镀镉合金钢短螺纹公称六角紧公差螺栓.等级:1100MPa(室温)/235℃; 德文版本 EN 2859:1995 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2859:1995 |
| DIN EN 28839-1991 | 紧固件的机械性能.有色金属制造的螺栓、螺钉、螺柱和螺母 | Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991 |
| DIN EN 2925-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 长螺纹轻柄十二角头螺栓.等级:900 MPa (室温)摄氏 650 度; 德文版 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2925:1994 |
| DIN EN 2931-1994 | 航空航天系列.耐高温钢 FE-PA92HT(A286) 长螺纹轻柄T型头螺栓.等级:900 MPa (室温)摄氏 650 度; 德文版本 E | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2931:1994 |
| DIN EN 2933-1996 | 航空航天系列.高温镍基合金HI-P100HT(因康镍718)长螺纹细杆T字头螺栓.等级:1275 MPa(室温)/650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2933:1996 |
| DIN EN 2934-1996 | 航空航天系列.高温镍基合金HI-P100HT(因康镍718)长螺纹,细杆镀银T字头螺栓.等级:1275 MPa(室温)/650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2934:1996 |
| DIN EN 2935-1996 | 航空航天系列.高温镍基合金HI-P101HT(沃斯帕落伊合金)长螺纹细杆T字头螺栓.等级:1210 MPa(室温)/730℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2935:1996 |
| DIN EN 2936-1996 | 航空航天系列.高温镍基合金HI-P101HT(沃斯帕落伊合金)长螺纹细杆镀银T字头螺栓.等级:1210 MPa(室温)/730℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 °C; German version EN 2936:1996 |
| DIN EN 3008-1998 | 航空航天系列.NI-P100HT(因康718)耐热镍基合金制长螺纹减轻杆的六角头螺栓.等级:1275 MPa/650℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa/650 °C; German version EN 3008:1998 |
| DIN EN 3009-1998 | 航空航天系列.NI-P100HT(因康718)耐热镍基合金制镀银的长螺纹减轻杆的六角头螺栓.等级:1275 MPa/650℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa/650 °C, silver plated; German version EN 3009:1998 |
| DIN EN 3010-1998 | 航空航天系列.NI-P101HT(Waspaloy)耐热镍基合金制长螺纹减轻杆的六角头螺栓.等级:1210 MPa/730℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification 1210 MPa/730 °C; German version EN 3010:1998 |
| DIN EN 3011-1998 | 航空航天系列.NI-P101HT (Waspaloy)耐热镍基合金制镀银的长螺纹减轻杆的六角头螺栓.等级:1210 MPa/730℃ | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa/730 °C; German version EN 3011:1998 |
| DIN EN 3052-1994 | 航空航天.耐热耐蚀钢制钝感化处理的短螺纹紧公差杆标准六角头螺栓.等级:1100MPa(室温)/425摄氏度 | Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C (includes amendment A1:1993); German version EN 3052:1993 + A1:1993 |
| DIN EN 3063-1994 | 航空航天系列.耐高温镍基合金 NI-P101HT(沃斯帕洛尹合金) 中长螺纹十二角紧公差螺栓.等级:1210MPa (室温) | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3063:1994 |
| DIN EN 3202-1996 | 航空航天系列.T形头螺栓放油孔和集油器.设计标准 | Aerospace series - Holes and traps for T-head bolts - Design standard; German version EN 3202:1995 |
| DIN EN 3379-1996 | 航空航天系列.高温镍基合金NI-P101HT(沃斯帕落伊合金)厚螺母用中螺纹十二角配合螺栓.等级:1210 MPa(室温)/7 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3379:1996 |
| DIN EN 3444-2007 | 航空航天系列.钝化处理的耐热镍基合金中长度螺纹紧公差标准螺杆的大双六角头螺栓.等级:1250MPa(室温)/650℃ | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature)/650 °C; German and English version EN 3444:2006 |
| DIN EN 3724-2005 | 航空航天系列.MoS2涂覆的钛合金TI-P64001制长螺纹细杆双六角头螺栓.强度等级:1100 MPa(室温) | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3724:2004 |
| DIN EN 3818-2005 | 航空航天系列.钛合金TI-P64001制MJ螺纹螺栓.强度等级:1100 MPa(室温).技术规范 | Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification; German and English version EN 3818:2004 |
| DIN EN 3832-2005 | 航空航天系列.耐热镍基合金NI-P100HT(铬镍铁合金718)制长螺纹细杆双六角头螺栓.等级:1550MPa(室温)/650℃ | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 3832:2004 |
| DIN EN 3833-2005 | 航空航天系列.钝化的耐热镍基合金NI-PH2601(铬镍铁合金718)制MJ螺纹螺栓.等级:1550MPa(室温)/650℃.技术规 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature)/ 650 °C - Technical specification; German and English version EN 3833:2004 |
| DIN EN 3907-2006 | 航空航天系列.标准杆、长螺纹、双六角头、镀MoS<指数2>的钛合金TI-P64001螺栓.等级:1100MPa(室温)/350°C. | Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/350 °C: German and English version EN 3907:2004 |
| DIN EN 3912-2007 | 航空航天系列.镀银、FE-PA2601(FE-PA92HT,A286)型、长螺纹、细杆、六瓣凹槽、平头螺栓耐热钢.分类:1100MPa( | Aerospace series - Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3912:2007 |
| DIN EN 4009-2006 | 航空航天系列.耐热镍基合金NI-PH2601(铬镍铁合金718)制带安全锁线孔、减径柄、长螺纹的双六角头螺栓.等级:1 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4009:2004 |
| DIN EN 4172-2006 | 航空航天系列.紧公差TI-P64001阳极电镀的米制钛合金杆沉头、凹头锁紧螺栓.分类:1100 MPa / 315 °C（周围温 | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4172:2006 |
| DIN EN 4173-2006 | 航空航天系列.紧公差TI-P64001阳极电镀的米制钛合金杆１００°正常头、凹头锁紧螺栓.分类:1100 MPa / 315 | Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4173:2006 |
| DIN EN 4176-2007 | 航空航天系列.阳极电镀或热镀铝法的TI-P6400钛合金紧公差拉紧/剪切式100°埋头标准头钉紧螺栓.TI-P99002钛 | Aerospace series - Lockbolts, 100° countersunk normal head or protruding head, tension-/sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification; German and English version EN 4176:2005 |
| DIN EN 4311-2007 | 航空航天系列.MoS<(指数)2>润滑耐高温和耐腐蚀钢的中长螺纹粗公差递减柄螺栓.等级:1100MPa(室温)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4311:2006 |
| DIN EN 4312-2007 | 航空和航天系列.钝化铝合金涂层耐腐蚀耐热中长螺纹粗公差递减柄螺栓.等级:1100MPa(室温下)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4312:2006 |
| DIN EN 4321-2006 | 航空航天系列.镀银耐热镍基合金NI-PH2601(铬镍铁合金718)制带安全锁线孔、减径柄、长螺纹的双六角头螺栓.等 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4321:2004 |
| DIN EN 4322-2006 | 航空航天系列.阳极氧化处理镀MoS<指数2>的TI-P64001制带安全锁线孔、减径柄、长螺纹的双六角头螺栓.强度等 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature): German and English version EN 4322:2004 |
| DIN EN 4352-2006 | 航空航天系列.镀MoS2的耐热镍基合金NI-PH2601(铬镍铁合金 718)制带安全锁线孔、减径柄、长螺纹的双六角头螺 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated - Classification: 1550 MPa (at ambient temperature) /425 °C; German and English version EN 4352:2004 |
| DIN EN 4401-2006 | 航空航天系列.紧公差TI-P64001铝制有色覆层的米制钛合金杆沉头、凹头锁紧螺栓.分类:1100 MPa / 315 °C（周 | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4401:2006 |
| DIN EN 4402-2007 | 航空航天系列.米制有铝色涂层钛合金TI-P64001紧公差剪切式100°埋头标准钉锁紧螺栓.等级:1100 MPa (常温)/3 | Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4402:2006 |
| DIN EN 4495-2007 | 航空和航天系列.钝化铝合金涂层阳极电镀钛合金短螺纹紧配合标准柄正十二头螺栓.等级:1100MPa(室温下)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4495:2006 |
| DIN EN 4498-2007 | 用有色热镀铝法钝化镍合金耐热中长螺纹紧公差标称柄大十二头螺栓.分类:1550MPa(室温)/315℃ | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating, Classification: 1 550 MPa (at ambient temperature)/315 °C; German and English version EN 4498:2005 |
| DIN EN 4501-2007 | 航空航天系列.带有色热镀铝覆层阳极氧化的钛合金中短螺纹紧公差标准柄正六角头螺栓、米制系列.等级:1100MPa | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4501:2006 |
| DIN EN 477-1995 | 门窗制造用未增塑聚氯乙烯型材.用沉降螺栓测定主截面耐冲击强度 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by falling mass; German version EN 477:1995 |
| DIN EN 74-1-2005 | 脚手架和支承架用联结件、中心螺栓和踏板.第1部分:钢管用联结件.要求和试验规程.德文版本 EN 74-1-2005德文 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures; German version EN 74-1:2005 |
| DIN EN ISO 10434-2005 | 石油、石油化学和相关工业用螺栓帽状钢闸阀 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004); German version EN ISO 10434:2004 |
| DIN EN ISO 10664-2005 | 螺栓和螺钉用内板拧的六角花形 | Hexalobular internal driving feature for bolts and screws (ISO 10664:2005); German version EN ISO 10664:2005 |
| DIN EN ISO 3506-1-1998 | 耐蚀钢紧固件的机械性能.第1部分:螺栓,螺钉和螺柱 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997 |
| DIN EN ISO 4014 Berichtigung 1-2006 | 六角头螺栓.产品等级A和B级(ISO 4014:1999) | Hexagon head bolts - Product grades A and B (ISO 4014:1999); German version EN ISO 4014:2000, Corrigenda to DIN EN ISO 4014:2001-03 |
| DIN EN ISO 4014-2001 | 六角头螺栓.产品等级A和B | Hexagon head bolts - Product grades A and B (ISO 4014:1999); German version EN ISO 4014:2000 |
| DIN EN ISO 4016-2001 | 六角头螺栓.产品等级C | Hexagon head bolts - Product grade C (ISO 4016:1999); German version EN ISO 4016:2000 |
| DIN EN ISO 4759-1-2001 | 紧固件公差.第1部分:螺栓、螺钉和垫圈和螺母.产品等级A、B和C | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 |
| DIN EN ISO 4759-3-2000 | 紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.产品等级A和C | Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000 |
| DIN EN ISO 6149-1-2007 | 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第1部分:锪孔沟槽中装 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006); German version EN ISO 6149-1:2007 |
| DIN EN ISO 6149-2-2007 | 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第2部分:重型(S系列) | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006); German version EN ISO 6149-2:2007 |
| DIN EN ISO 6149-3-2007 | 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第3部分:轻型(L系列) | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006); German version EN ISO 6149-3:2007 |
| DIN EN ISO 8765-2001 | 米制细牙螺纹六角头螺栓.产品等级A和B | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999); German version EN ISO 8765:2000 |
| DIN EN ISO 887-2006 | 通用米制螺栓、螺钉和螺母用的平垫圈.一般示意图(ISO 887:2000 + Cor. 1:2006) | Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000 + Cor. 1:2006) English version of DIN EN ISO 887:2000 + AC:2006-07 |
| DIN EN ISO 898-1-1999 | 碳钢和合金钢制紧固件的机械性能.第1部分:螺栓,螺钉和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999 |
| DIN EN ISO 9974-1-2000 | 一般用途和流体动力连接件.使用ISO 261螺纹的弹性密封或金属与金属密封的气门和双头螺栓端头.第1部分:螺纹 | Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996); German version EN |
| DIN EN ISO 9974-2-2000 | 通用和液压传动用联接件.用ISO261弹性螺纹或金属与金属密封的气门和双头螺栓端头.第2部分:(E型)带弹性密封 | Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000 |
| DIN EN ISO 9974-3-2000 | 一般用途和流体动力连接件.使用ISO 261螺纹的弹性密封或金属与金属密封的气门和双头螺栓端头.第3部分:(B型) | Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); German version EN ISO 9974-3:2000 |
| DIN ISO 16030-2007 | 气压传动.接头.端口和柱头螺栓端头.(ISO 16030-2001+修改件1-2005) | Pneumatic fluid power - Connections - Ports and stud ends (ISO 16030:2001 + Amd. 1:2005) |
| DIN ISO 1891-1979 | 紧固件.螺栓、螺钉、螺母和附件.术语和名称 | Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature |
| DIN ISO 262-1999 | ISO一般用途米制螺纹.螺钉、螺栓和螺母的选用尺寸（ISO 262- | ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998) |
| DIN ISO 5855-2-1989 | 航空航天.MJ螺纹.第2部分:螺栓和螺母的极限尺寸; 等同采用 ISO 5855-2:1988 | Aerospace; MJ threads; limit dimensions for bolts and nuts; identical with ISO 5855-2:1988 |
| DIN ISO 691-2007 | 螺栓和螺母用装配工具.扳手和套筒扳手开口.通用公差 | Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use (ISO 691:2005) English version of DIN ISO 691:2007-04 |
| DIN ISO 7913-1986 | 航空和航天.紧固件.螺栓和螺钉的形状和位置公差.等同采用 ISO 7913-1986 | Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985 |
| DIN ISO 885-2001 | 普通螺栓和螺钉.米制系列.端头半径 | General purpose bolts and screws - Metric series - Radii under the head (ISO 885:2000) |
| DIN ISO 8992-2005 | 紧固件.螺栓、螺钉、螺柱和螺母的一般要求 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| DIN ISO 9152-2005 | 航空航天.强度等级为1100 MPa的钛合金制MJ螺纹螺栓.采购规范 | Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification (ISO 9152:1998) |
| DIN V 4001-11 Bb.1-1992 | 计算机辅助设计标准零件库.第11 Bb.1部分:几何和参数规范.六角头螺栓 | CAD standard parts library; specification of geometrie and parameters; hexagon head bolts |
| DIN V 4001-201-1990 | 计算机辅助设计标准件文档.第201部分:几何和参数规范.用工具从内部驱动的有普通安装面紧公差的平头螺栓 | CAD standard parts file; specifications of geometry and parameters; head screws, with plain sitting surface, with drive internal by tool |
| DIN V 4001-202-1989 | 计算机辅助设计标准件文档.第202部分:几何和参数规范.用工具从外部驱动的有普通安装面紧公差的平头螺栓 | CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive external by tool |
| DIN V 4001-204-1990 | 计算机辅助设计标准件文档.第204部分:几何和参数规范.用工具从内部驱动的有普通安装面紧公差的平头螺栓 | CAD standard parts file; specifications of geometry and parameters; bolts with head, close tolerance, with plain sitting surface, with drive internal by tool |
| DIN V 4001-901-1988 | 计算机辅助设计标准件文档.第901部分:几何和参数规范.螺栓和带台肩的销钉 | CAD standard parts file; specification of geometry and parameters; bolts and pins with shoulders |
| DIN V 4001-902-1988 | 计算机辅助设计标准件文档.第902部分:几何和参数规范.螺栓和带头的销钉 | CAD standard parts file; specification of geometry and parameters; bolts and pins with head |
| DIN V 4001-903-1990 | 计算机辅助设计标准件文档.第903部分:几何和参数规范.无头螺栓和销钉 | CAD standard parts file; specifications of geometry and parameters; bolts and pins without head |
| DIN V 65900-11-2001 | 航空航天系列.螺栓和销钉.材料(AECMA 技术报告TR 3775:1999) | Aerospace series - Bolts and pins - Materials (AECMA Technical Report TR 3775:1999) |
| DIN V 74051-10-1989 | 牵引车和拖车之间的机械连接件.第10部分:40 mm 自动螺栓联轴器与中心轴挂车使用的附加规范 | Mechanical connections between towing vehicles and trailers; automatic bolt coupling 40; additional specifications for the use with centre axle trailers |
| DIN V 74052-10-1989 | 牵引车和拖车之间的机械连接件.第10部分:50 mm 自动螺栓联轴器与中心轴挂车使用的附加规范 | Mechanical connections between towing vehicles and trailers; automatic bolt coupling 50; additional specifications for the use with centre axle trailers |
| 编号 | 中文名称 | 英文名称 |