| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DL/T 694-1999 | 高温紧固螺栓超声波检验技术导则 | () |
| DL/T 764.1-2001 | 电力金具专用紧固件 六角头带销孔螺栓 | () |
| DL/T 764.4-2002 | 输电线路铁塔及电力金具紧固用冷镦热浸镀锌螺栓与螺母 | () |
| FZ/T 90027-1991 | 装螺栓螺钉用的冲孔尺寸 | () |
| FZ/T 90068-1995 | 装螺栓用的铸孔尺寸 | () |
| GB/T 10-1988 | 沉头方颈螺栓 | Flat countersunk square neck bolts |
| GB/T 11-1988 | 沉头带榫螺栓 | Flat countersunk nib bolts |
| GB/T 12-1988 | 半圆头方颈螺栓 | Cup head square neck bolts |
| GB/T 1228-2006 | 钢结构用高强度大六角头螺栓 | High strength bolts with large hexagon head for steel structures |
| GB/T 1231-2006 | 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件 | Specifications of high strength bolts with large hexagon head,large hexagon nuts,plain washers for steel structures |
| GB/T 13-1988 | 半圆头带榫螺栓 | Cup head nib bolts |
| GB/T 14-1998 | 大半圆头方颈螺栓C级 | Cup head square neck bolts with large head--Product grade C |
| GB/T 15-1988 | 大半圆头带榫螺栓 | Cup head nib bolts with large head |
| GB/T 152.4-1988 | 紧固件六角头螺栓和六角螺母用沉孔 | Fasteners--Counterbores for hexagonbolts and nuts |
| GB/T 158-1996 | 机床工作台T形槽和相应螺栓 | Machine tool tables--T-slots and corresponding bolts |
| GB/T 16674.1-2004 | 六角法兰面螺栓小系列 | Hexagon bolts with flange--Small series |
| GB/T 16674.2-2004 | 六角法兰面螺栓细牙小系列 | Hexagon bolts with flange with metric fine pitch thread--Small series |
| GB/T 16938-2008 | 紧固件 螺栓、螺钉、螺柱和螺母 通用技术条件 | () |
| GB/T 16939-1997 | 钢网架螺栓球节点用高强度螺栓 | High strength bolts for joints of space grid structures |
| GB/T 18230.1-2000 | 栓接结构用大六角头螺栓螺纹长度按GB/T 3106C级8.8和10.9级 | Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C--Property classes 8.8 and 10.9 |
| GB/T 18230.2-2000 | 栓接结构用大六角头螺栓短螺纹长度C级8.8和10.9级 | Hexagon bolts forhigh-strength structural bolting with large width across flats(short thread length)--Product grade C--Property classes 8.8 and 10.9 |
| GB/T 19990-2005 | 土壤耕作机械 土壤工作部件固定螺栓 | Equipment for working the soil-Fixing bolts for soil working element |
| GB/T 20410-2006 | 涡轮机高温螺栓用钢 | Steels for turbine bolts at high temperature |
| GB/T 21934-2008 | 土方机械 沉头方颈螺栓 | Earth-moving machinery - Plough bolt |
| GB/T 27-1988 | 六角头铰制孔用螺栓A和B级 | Hexagon fit bolts--Product grade A and B |
| GB/T 28-1988 | 六角头螺杆带孔铰制孔用螺栓A和B级 | Hexagon fit bolts with split pin hole on shank--Product grade A and B |
| GB/T 29.1-1988 | 六角头头部带槽螺栓A和B级 | Hexagon bolts with slot on head--Product grade A and B |
| GB/T 29.2-1988 | 十字槽凹穴六角头螺栓 | Cross recessed hexagon bolts with indentation |
| GB/T 3098.1-2000 | 紧固件机械性能螺栓、螺钉和螺柱 | Mechanical properties of fasteners--Bolts，screws and studs |
| GB/T 3098.10-1993 | 紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母 | Mechanical properties of fasteners--Bolts，screws，studs and nuts made of non-ferrous metals |
| GB/T 3098.13-1996 | 紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～10mm | Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters from 1mm to 10mm |
| GB/T 3098.6-2000 | 紧固件机械性能不锈钢螺栓、螺钉和螺柱 | Mechanical properties of fasteners--Bolts，screws and studs made of stainless-steel |
| GB/T 31.1-1988 | 六角头螺杆带孔螺栓A和B级 | Hexagon bolts with split pin hole on shank--Product grade A and B |
| GB/T 31.2-1988 | 六角头螺杆带孔螺栓细杆B级 | Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B |
| GB/T 31.3-1988 | 六角头螺杆带孔螺栓细牙A和B级 | Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B |
| GB/T 3103.1-2002 | 紧固件公差螺栓、螺钉、螺柱和螺母 | Tolerances for fasteners--Bolts，screws，studs and nuts |
| GB/T 3103.2-1982 | 紧固件公差用于精密机械的螺栓、螺钉和螺母 | Tolerances for fasteners--Bolts，screws and nuts for fine mechanics |
| GB/T 3105-2002 | 普通螺栓和螺钉头下圆角半径 | General purpose bolts and screws--Radii under the head |
| GB/T 3106-1982 | 螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度 | Bolts，screws and studs--Nominal lengths，and thread lengths for general purpose bolts |
| GB/T 32.1-1988 | 六角头头部带孔螺栓A和B级 | Hexagon bolts with wire holes on head--Product grade A and B |
| GB/T 32.2-1988 | 六角头头部带孔螺栓细杆B级 | Hexagon bolts with wire holes on head--Reduced shank--Product grade B |
| GB/T 32.3-1988 | 六角头头部带孔螺栓细牙A和B级 | Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B |
| GB/T 3227-2008 | 螺栓螺母用装配工具 机动套筒工具的传动四方 | () |
| GB/T 3228-2000 | 螺栓螺母用装配工具冲击式机动四方传动套筒的尺寸 | Assembly tools for screws and nuts--Machine-operated square drive sockets (“impact”)--Dimensions |
| GB/T 3229-2008 | 螺栓螺母用装配工具 手动和机动螺刀头的传动端和连接部件的尺寸及扭矩试验 | () |
| GB/T 35-1988 | 小方头螺栓B级 | Square head bolts with small head--Product grade B |
| GB/T 3632-2008 | 钢结构用扭剪型高强度螺栓连接副 | () |
| GB/T 5277-1985 | 紧固件螺栓和螺钉通孔 | Fasteners--Clearance holes for bolts and screws |
| GB/T 5286-2001 | 螺栓、螺钉和螺母用平垫圈总方案 | Plain washers for bolts，screws and nuts--General plan |
| GB/T 5650-2008 | 扩口式管接头用空心螺栓 | () |
| GB/T 5779.1-2000 | 紧固件表面缺陷螺栓、螺钉和螺柱一般要求 | Fasteners--Surface discontinuities--Bolts，screws and studs for general requirements |
| GB/T 5779.3-2000 | 紧固件表面缺陷螺栓、螺钉和螺柱特殊要求 | Fasteners--Surface discontinuities--Bolts，screws and studs for special requirements |
| GB/T 5780-2000 | 六角头螺栓C级 | Hexagon head bolts--Product grade C |
| GB/T 5781-2000 | 六角头螺栓全螺纹C级 | Hexagon head bolts--Full thread--Product gradeC |
| GB/T 5782-2000 | 六角头螺栓 | Hexagon head bolts |
| GB/T 5783-2000 | 六角头螺栓全螺纹 | Hexagon head bolts--Full thread |
| GB/T 5784-1986 | 六角头螺栓细杆B级 | Hexagon head bolts--Reduced shank--Product gradeB |
| GB/T 5785-2000 | 六角头螺栓细牙 | Hexagon head bolts with fine pitch thread |
| GB/T 5786-2000 | 六角头螺栓细牙全螺纹 | Hexagon head bolts with fine pitch thread--Full thread |
| GB/T 5789-1986 | 六角法兰面螺栓加大系列B级 | Hexagon flange bolts--Heavy series--Product grade B |
| GB/T 5790-1986 | 六角法兰面螺栓加大系列细杆B级 | Hexagon flange bolts--Heavy series--Product grade B |
| GB/T 6188-2008 | 螺栓和螺钉用内六角花形 | () |
| GB/T 7559-2005 | 纤维增强塑料层合板螺栓连接挤压强度试验方法 | Test method for bearing strength by bolted joints of fiber reinforced plastics laminates |
| GB/T 794-1993 | 加强半圆头方颈螺栓 | Strengthened cap head square neck bolts |
| GB/T 798-1988 | 活节螺栓 | Eye bolts |
| GB/T 799-1988 | 地脚螺栓 | Eyelet bolts |
| GB/T 8-1988 | 方头螺栓C级 | Square head bolts--Product grade C |
| GB/T 800-1988 | 沉头双榫螺栓 | Flat countersunk double nib bolts |
| GB/T 801-1998 | 小半圆头低方颈螺栓B级 | Cup head square neck bolts with small head andshort neck--Product grade B |
| GB/T 892-1986 | 螺栓紧固轴端挡圈 | Lock rings at the end of shaft with bolt |
| GB/T 9074.1-2002 | 螺栓或螺钉和平垫圈组合件 | Bolt or screw and washer assemblies with plain washers |
| GB/T 9074.11-1988 | 十字槽凹穴六角头螺栓和平垫圈组合件 | Cross recessed hexagon bolt with indentation and plain washer assemblies |
| GB/T 9074.12-1988 | 十字槽凹穴六角头螺栓和弹簧垫圈组合件 | Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies |
| GB/T 9074.13-1988 | 十字槽凹穴六角头螺栓，弹簧垫圈和平垫圈组合件 | Cross recessed hexagon bolt with indentation，single coil lock washer and plain washer assemblies |
| GB/T 9074.15-1988 | 六角头螺栓和弹簧垫圈组合件 | Hexagon head bolt and single coil spring lock washer assemblies |
| GB/T 9074.16-1988 | 六角头螺栓和外锯齿锁紧垫圈组合件 | Hexagon head bolt and serrated lock washer external teeth assemblies |
| GB/T 9074.17-1988 | 六角头螺栓， 弹簧垫圈和平垫圈组合件 | Hexagon head bolt，single coil spring lock washer and plain washer assemblies |
| HG/T 21545-2006 | 地脚螺栓（锚栓）通用图 | () |
| HG/T 21573-1995 | 高压螺栓和螺栓液压上紧装置 | () |
| JB/T 10660-2006 | 无损检测 锻钢材料超声检测 连杆螺栓的检测 | Non destructive testing-Ultrasonic testing of forged steel materials-Testing of conneting red bolts |
| JB/T 1700-2008 | 阀门零部件 螺母、螺栓和螺塞 | () |
| JB/T 2984.2-1999 | 履带式推土机 驱动轮齿块用螺栓 | () |
| JB/T 3053-1991 | 螺栓联合自动机 基本参数 | () |
| JB/T 4209.1-1996 | 冷镦六角头螺栓模具 初镦冲头 | () |
| JB/T 4209.10-1996 | 冷镦六角头螺栓模具 标准杆凹模 A型 | () |
| JB/T 4209.11-1996 | 冷镦六角头螺栓模具 标准杆凹模 B型 | () |
| JB/T 4209.12-1996 | 冷镦六角头螺栓模具 切边凹模 A型 | () |
| JB/T 4209.13-1996 | 冷镦六角头螺栓模具 切边凹模 B型 | () |
| JB/T 4209.2-1996 | 冷镦六角头螺栓模具 终镦冲头 | () |
| JB/T 4209.3-1996 | 冷镦六角头螺栓模具 切边冲头 | () |
| JB/T 4209.4-1996 | 冷镦六角头螺栓模具 初镦凹模 | () |
| JB/T 4209.5-1996 | 冷镦六角头螺栓模具 细杆凹模 A型 | () |
| JB/T 4209.6-1996 | 冷镦六角头螺栓模具 细杆凹模 B型 | () |
| JB/T 4209.7-1996 | 冷镦六角头螺栓模具 全螺纹缩径凹模 A型 | () |
| JB/T 4209.8-1996 | 冷镦六角头螺栓模具 全螺纹缩径凹模 B型 | () |
| JB/T 4209.9-1996 | 冷镦六角头螺栓模具 全螺纹缩径凹模 C型 | () |
| JB/T 5306-2007 | 关节轴承 自润滑球头螺栓杆端关节轴承 外形尺寸和公差 | () |
| JB/T 5399-1991 | 尼龙嵌件锁紧螺栓、螺钉锁紧部分 结构要素与锁紧力矩 | () |
| JB/T 5932.5-1991 | 履带式推土机 履带螺栓 | () |
| JB/T 6390-2007 | 液力螺栓预紧器 | () |
| JB/T 6686-1993 | 工程机械 螺栓拧紧力矩的检验方法 | () |
| JB/T 6688-1993 | 推土机、铲运机和平地机 刀片用螺栓 | () |
| JB/T 7293－2007 | 内燃机主轴承盖 螺栓与螺母 技术条件 | Internal combustion engines -Main bearing lid bolts and nuts-Specification |
| JB/T 7983-2001 | 普通磨具 螺栓紧固平形砂轮 | () |
| JB/T 8007.1-1999 | 机床夹具零件及部件 球头螺栓 | () |
| JB/T 8007.2-1999 | 机床夹具零件及部件 T 型槽快卸螺栓 | () |
| JB/T 8007.3-1999 | 机床夹具零件及部件 钩形螺栓 | () |
| JB/T 8007.4-1999 | 机床夹具零件及部件 双头螺栓 | () |
| JB/T 8007.5-1999 | 机床夹具零件及部件 槽用螺栓 | () |
| JB/T 8025-1999 | 机床夹具零件及部件 起重螺栓 | () |
| JB/T 8416-1996 | 内燃机连杆螺栓 技术条件 | () |
| JB/T 8837-2000 | 内燃机连杆螺栓 金相检验 | () |
| JB/T 9150-1999 | 防松螺栓连接副 | () |
| JB/T 9151.1-1999 | 紧固件测试方法 尺寸与几何精度 螺栓、螺钉、螺柱和螺母 | () |
| JB/T 9743-1999 | 内燃机 连杆螺栓 磁粉探伤技术条件 | () |
| JB/T 9765.1-1999 | 内燃机 气缸盖螺栓 技术条件 | () |
| JB/T 9765.2-1999 | 内燃机 飞轮螺栓 技术条件 | () |
| JB/T 999-1977 | 管接头用铰接螺栓 | () |
| MT/T 187.1-1988 | 刮板输送机紧固件 螺栓技术条件 | () |
| MT/T 187.10-1996 | 刮板输送机紧固件 E型螺栓 | () |
| MT/T 187.2-1988 | 刮板输送机紧固件 U型螺栓 | () |
| MT/T 187.3-1988 | 刮板输送机紧固件 棱头螺栓A型 | () |
| MT/T 187.4-1988 | 刮板输送机紧固件 棱头螺栓B型 | () |
| MT/T 187.5-1988 | 刮板输送机紧固件 长方头螺栓 | () |
| MT/T 187.6-1988 | 刮板输送机紧固件 梯形头螺栓 | () |
| MT/T 187.7-1988 | 刮板输送机紧固件 半圆头方颈螺栓 | () |
| QC/T 340-1999(2005) | 六角法兰承面带齿螺栓 | () |
| QC/T 517-1999(2005) | 汽车钢板弹簧用U型螺栓及螺母技术条件 | () |
| QC/T 598-1999(2005) | 承面凸焊螺栓 | () |
| QC/T 599-1999(2005) | 端面凸焊螺栓 | () |
| QC/T 600-1999(2005) | 六角头螺栓和锥形弹性垫圈的组合件 | () |
| YBJ 204-1991(2006年确认) | 轮式拖拉机轮毂螺栓、车轮螺钉和螺母 技术条件 | Wheeled tractor-Hub bolts,wheel screws and nuts-Specifications |
| YS/T 291-1994(2005) | 标准螺栓缩径模具用硬质合金毛坯 | () |
| YS/T 293-1994(2005) | 标准螺栓墩粗模具用硬质合金毛坯 | () |
| 编号 | 中文名称 | 英文名称 |