| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| NF A47-251-5-2003 | 钢丝绳接线端.安全.第5部分:U形螺栓拉线器 | (Terminations for steel wire ropes - Safety - Part 5 : U-bolt wire rope grips.) |
| NF A49-580-1988 | 钢管脚手架和支承架用联结件、中心螺栓和踏板.要求和测试程序 | (Cooplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes. Requirements and test procedures.) |
| NF A87-021-1998 | 焊接.弧双端螺栓焊接的双端螺栓和陶瓷箍.(欧洲标准EN ISO 13918) | (Welding. Studs and ceramic ferrules for arc stud welding.) |
| NF A89-600-1998 | 焊接.金属材料的弧双端螺栓焊接(欧洲标准EN ISO 14555) | (WELDING. ARC STUD WELDING OF METALLIC MATERIALS. (EUROPEAN STANDARD EN ISO 14555).) |
| NF E04-014-1933 | 机械、电气和相关工业的技术图，构架的铆钉和螺栓的图上符号表示法（１９８１．９确认） | (TECHNICAL DRAWINGS FOR MECHANICAL,ELECTRICAL AND CONNECTED INDUSTRIES. GRAPHICAL SYMBOLS ON DRAWINGS FOR RIVETS AND BOLTS.) |
| NF E25-011-1992 | 紧固件的机械特性.由非亚铁金属制造的螺栓,螺钉,柱螺栓和螺母 | (MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).) |
| NF E25-022-1-2001 | 紧固件公差.螺栓、螺钉、双头螺栓和螺母.第1部分:产品等级A、B及C | (Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.) |
| NF E25-023-1992 | 紧固件.螺栓和螺钉的自由尺寸孔 | (Fasteners. Clearance hole for bolts and screws.) |
| NF E25-100-1-1999 | 碳钢合金制成的紧固件的机械性能.第1部分:螺栓、螺钉和螺柱 | (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.) |
| NF E25-100-3-1992 | 紧固件.表面不连续性.第1部分:一般要求的螺栓、螺钉和螺柱 | (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).) |
| NF E25-100-4-1992 | 紧固件.表面不连续性.第3部分:特殊要求的螺栓、螺钉和螺柱 | (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).) |
| NF E25-100-6-1998 | 不锈钢紧固件耐腐蚀的机械特性.螺栓,螺丝和双端螺栓 | (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.) |
| NF E25-100-7-1995 | 紧固件的机械性能.第7部分:公称直径1-10mm的螺栓和螺钉的扭力试验和最小扭矩 | (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).) |
| NF E25-112-2001 | 六角头螺栓.产品等级A和B | (Hexagon head bolts - Product grades A and B.) |
| NF E25-113-1992 | 紧固件.六角头螺栓.B级、缩杆制品 | (Fasteners. Hexagon head bolts. Product grade B. Reduced shank (shank diameter = pitch diameter).) |
| NF E25-115-1-2001 | 六角头螺栓.产品等级C | (Hexagon head bolts - Product grade C.) |
| NF E25-140-1994 | 紧固件.电弧焊接双端螺栓.符号SA.尺寸和物理化学特性.拉制电弧焊接螺栓系统 | (FASTENERS. ARC WELDING STUDS LOADING. SYMBOL SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL. DRAWN ARC STUD WELDING SYSTEM.) |
| NF E25-152-2001 | 米制细牙螺纹的六角头螺栓.产品等级A和B | (Hexagon head bolts with metric fine pitch thread - Product grades A and B.) |
| NF E25-501-2000 | 紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.A级和C级 | (Tolerances for fasteners - Part 3 : plain washers for bolts, screws and nuts - Product grades A and C.) |
| NF E25-504-1-2003 | 米制细牙螺纹六角法兰面螺栓.小系列 | (Hexagon bolts with flange with metric fine pitch thread - Small series.) |
| NF E25-504-1998 | 法兰六角型螺栓.小型系列 | (HEXAGON BOLTS WITH FLANGE. SMALL SERIES. (EUROPEAN STANDARD EN 1662).) |
| NF E25-505-1997 | 带法兰六角头螺栓.重形系列(欧洲标准EN 1665) | (HEXAGON BOLTS WITH FLANGE. HEAVY SERIES. (EUROPEAN STANDARD EN 1665).) |
| NF E25-525-2000 | 通用米制螺栓、螺钉和螺母用平垫圈.一般示意图 | (Plain washers for metric bolts, screws and nuts for general purposes - General plan.) |
| NF E25-800-0-1994 | 紧固件.波纹钢管用螺栓.第0部分:按要求所制的螺栓 | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 0 : BOLTS RELATED PRESCRIPTIONS (SCREWS + NUTS).) |
| NF E25-800-1-1994 | 紧固件.波纹钢管用螺栓.第1部分:带法兰或不带法兰,带尖或不带尖的六角头螺钉.产品等级A | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.) |
| NF E25-800-2-1994 | 紧固件.波纹钢管用螺栓.第2部分:带尖或不带尖的圆头螺钉.产品等级A | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.) |
| NF E25-800-3-1994 | 紧固件.波纹钢管用螺栓.第3部分:不带法兰的凸形六角螺母.产品等级C | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 3 : CONVEX HEXAGON NUTS WITHOUT FLANGE. PRODUCT GRADE C.) |
| NF E25-800-4-1994 | 紧固件.波纹钢管用螺栓.第4部分:带法兰的凸形螺母.产品等级C | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 4 : CONVEX HEXAGON NUTS WITH FLANGE. PRODUCT GRADE C.) |
| NF E27-000-1972 | 螺栓、螺母及附件.术语 | (Bolts, nuts and accessories.nomenclature.) |
| NF E27-312-1959 | 商业性通用螺栓制造.圆柱头粗制或精制螺栓 | (CHEESE HEAD NIB BOLTS.) |
| NF E27-313-1959 | 商业性通用螺栓制造.圆头粗制或精制螺栓.直径从４到６０mm | (ROUND HEAD NIB BOLTS.) |
| NF E27-314-1959 | 商业性通用螺栓制造.埋头或凸圆埋头铁制粗制或精制螺栓.直径４到６０mm | (COUNTERSUNK OR RAISED COUNTERSUNK HEAD NIB BOLTS.) |
| NF E27-341-1973 | 商业性通用螺栓制造.“木结构”螺栓 | (BOLTS FOR TIMBER.) |
| NF E27-342-1961 | 商业性通用螺栓制造.埋头或凸圆埋头木螺栓 | (COUNTERSUNK OR RAISED COUNTERSUNK HEAD BOLTS (NIB OR SQUARE NECK) FOR TIMBER.) |
| NF E27-351-1969 | 商业性通用螺栓制造.凸圆头方颈螺栓 | (ROUND HEAD SQUARE NECK BOLTS (“JAPY“ TYPE).) |
| NF E27-353-1961 | 商业性通用螺栓制造.带销埋头犁形螺栓 | (COUNTERSUNK HEAD NIB BOLTS (“PLOUGHSHARE“ TYPE).) |
| NF E27-354-1961 | 商业性通用螺栓制造.方颈埋头犁形螺栓 | (COUNTERSUNK HEAD SQUARE NECK BOLTS (“PLOUGHSHARE“ TYPE).) |
| NF E27-355-1980 | 紧固件.底板受力器材.轻微磨损零件固定用的双耳埋头螺栓 | (FASTENERS. EQUIPMENT FOR WORKING THE SOIL. COUNTERSUNK HEAD NIB BOLTS FOR FASTENING THIN WEAR PARTS.) |
| NF E27-412-1973 | 商业性通用螺栓制造.宽的方螺帽.直径４到３０mm | (LARGE SQUARE NUTS.DIAMETERS FROM 4 TO 30 MM.) |
| NF E27-414-1969 | 螺栓制造.冠形螺帽 | (CASTLE NUTS.) |
| NF E27-488-1972 | 商业性通用螺栓制造.小销 | (Cotter pin hole dimensions.) |
| NF E27-682-1965 | 商业性通用螺栓制造.木结构螺栓装配的垫圈和垫片 | (Round or square washers for timber.) |
| NF E27-701-1984 | 金属结构施工检验紧固螺栓.技术规范.订货,检验和供货条件 | (Structural bolts and nuts intented for use in steel structures. Technical specifications. Order, test and delivery conditions.) |
| NF E27-702-1984 | 金属结构施工检验紧固螺栓.螺栓使用性能试验 | (Structural bolts and nuts intented for use in steel structures. Test on suitability of bolts for use.) |
| NF E27-711-1982 | 金属结构施工检验紧固螺栓.六角头螺栓.尺寸和公差 | (Locking bolts and nuts intended for use in metal constructions. Hexagon bolts. Dimensions and tolerances.) |
| NF E29-041-1994 | 工业管道.减缩的螺栓柄.规范 | (INDUSTRIAL PIPEWORK. REDUCED SHANK BOLTS. SPECIFICATIONS.) |
| NF E29-042-1-2000 | 法兰及其接头.螺栓连接.第1部分:螺栓连接的选择 | (Flanges and their joints - Bolting - Part 1 : selection of bolting.) |
| NF E29-042-2-2002 | 法兰及其连接件.螺栓连接.第2部分:钢制法兰用螺栓料的分类.PN标识的 | (Flanges and their joints - Bolting - Part 2 : classification of bolt materials for steel flanges, PN designated.) |
| NF E29-043-1990 | 工业管道工程.管道、锅炉和压力容器法兰组件用非合金钢或合金钢制螺栓 | (Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.) |
| NF E74-300-1998 | 螺栓和螺母用装配工具.扳手和套筒扳手的开口.通用公差 | (Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.) |
| NF F00-022-1978 | 铁路材料梗概.半成品调整螺栓 | (RAILWAY MATERIAL IN GENERAL. HALF-FINISHED ADJUSTING BOLTS.) |
| NF F00-023-1978 | 通用铁路设备.紧配合用精加工配合螺栓 | (RAILWAY MATERIAL IN GENERAL. FINISHED TIGHT-FIT BOLTS.) |
| NF F00-024-1978 | 通用铁路设备.动配合用精加工配合螺栓 | (RAILWAY MATERIAL IN GENERAL. FINISHED CLEARANCE FIT BOLTS.) |
| NF F00-025-1971 | 通用铁路设备.环首螺栓 | (GENERAL RAILWAY EQUIPMENT. EYE-BOLTS.) |
| NF F05-004-1972 | 铁路固定设备.加强固定用定位楔式螺栓 | (FIXED RAILWAY EQUIPMENT. EXPANSION BOLTS WITH SPIKES FOR EXTRA FIRM FIXING.) |
| NF F37-060-1983 | 铁路运输设备.液态化工产品运输用罐车和贮液集装箱.带扣钉螺栓闭锁装置的圆顶盖 | (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS AND TANK CONTAINERS FOR CARRYING LIQUID CHEMICAL PRODUCTS. DOME COVER WITH A TOGGLE-BOLT CLOSING DEVICE.) |
| NF F42-031-1990 | 铁路固定设备.电力牵引线用的压接或螺栓压接的装置 | (RAILWAY FIXED EQUIPMENT. CRIMPED OR BOLT CRIMPED TERMINAL MATERIAL FOR ELECTRIC TRACTION LINES.) |
| NF F56-121-1984 | 铁路固定设备.通讯和信号装置架空线路用器材.镀锌六角头螺栓 | (Fixed railway equipment. Material for telecommunication and signaling overhead lines. Galvanized hexagon head bolts.) |
| NF F56-122-1984 | 铁路固定设备.通讯和信号装置架空线路用器材.镀锌圆头螺栓 | (Fixed railway equipment. Material for telecommunication and signaling overhead lines. Galvanized round head bolts.) |
| NF F56-208-1980 | 铁路固定设备.通讯和信号装置架空线路用器材.固定螺栓用环 | (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. RINGS FOR BRACING BOLTS.) |
| NF F76-014-1987 | 铁路固定设备.３８mm鱼尾板螺栓板手 | (Fixed railway equipment. Fork-wrenchs of 38 for fish-bolts.) |
| NF F76-026-1976 | 铁路固定设备.粗制插销螺栓.销 | (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. KEY-BOLTS. KEY.) |
| NF J65-175-1958 | 造船工业.轴线.联轴节.套筒联轴节用轴端、制动销和装配螺栓 | (SHIPBUILDING. SHAFT LINES. COUPLINGS. DETAILS OF SHAFT ENDS,KEYS AND ASSEMBLY BOLTS FOR MUFF COUPLINGS.) |
| NF L05-224-1990 | 航空和航天螺栓用ISO 螺纹公差 | (Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for bolts and nuts.) |
| NF L05-230-2-1990 | 航空和航天.MJ螺纹.第2部分:螺栓和螺母的尺寸 | (AEROSPACE. MJ THREADS. PART 2 : LIMIT DIMENSIONS FOR BOLTS AND NUTS.) |
| NF L20-021-1995 | 航空航天系列.T型头螺栓孔和夹子的设计标准 | (AEROSPACE SERIES. HOLES AND TRAPS FOR T-HEAD BOLTS DESIGN STANDARD. (EUROPEAN STANDARD EN 3202).) |
| NF L21-271-2000 | 紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的凸头锁紧螺栓 | (Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-272-2000 | 紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的100°埋头锁紧螺栓 | (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-273-2000 | 紧固件.紧公差T-A６V铝合金杆并有XC１０钢环凸头锁紧螺栓 | (Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L21-274-2000 | 紧固件.紧公差T-A６V钛合金杆并有XC１０钢环１００°埋头锁紧螺栓 | (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L22-040-1956 | 航空螺栓螺母.使用公差.国际单位制螺纹 | (AIRCRAFT FASTENERS. MANUFACTURING TOLERANCES. (RECH.).) |
| NF L22-236-1989 | 航空用螺栓螺母.十二角头螺钉.使用温度在高于235℃ | (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.) |
| NF L22-237-1989 | 航空用螺栓螺母.带锁紧孔十二角头螺钉.使用温度在高于235℃ | (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.) |
| NF L22-246-1989 | 航空用螺栓螺母.十二角头螺钉.细螺距.使用温度高于在２３５℃ | (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.) |
| NF L22-431-2000 | 航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.ISO M或ISO MJ螺纹.根据直径4H5H或5H的Ⅱ类公差 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-432-2000 | 航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.左旋ISO螺纹.根据直径４H５H或５H的Ⅱ类公差 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, II, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-433-2000 | 航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.ISO M或ISO MJ螺纹４H公差等级 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-434-2000 | 航空用螺栓和螺母.标准厚度、标准凸起度六角头普通螺母.ISO螺纹左旋４H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-436-2000 | 航空用螺栓和螺母.带标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.接直径４H５H或5H进行公差分类 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-437-2000 | 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径4H5H或5H进行公差分类 | (Aircraft bolts and nuts - Nuts, hexagonal, palin, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-438-2000 | 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.接直径4H５H或５H进行公差 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-439-2000 | 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.４H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-440-2000 | 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.４H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-441-2000 | 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径5H4H或４H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-442-2000 | 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.按直径5H4H或４H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-443-2000 | 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.ISO M或ISO MJ螺纹.按直径5H4H或４H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-444-2000 | 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头普通螺母.左旋ISO M或ISO MJ螺纹.按直径5H4H或４H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-451-2000 | 航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.标准厚度.ISO M或ISO MJ螺纹.按直径４H５H或５H进行公差分类 | (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-453-2000 | 航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.ISO M或ISO MJ螺纹.按直径４H５H或５H进行公差分类 | (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.) |
| NF L22-455-2000 | 航空用螺栓和螺母.槽顶(有槽)扁六角头螺母.ISO M或ISO MJ螺纹.４H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-457-2000 | 航空用螺栓和螺母.槽顶(有槽)普通厚度六角头螺母.ISO M或ISO MJ螺纹.４H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-458-2000 | 航空用螺栓和螺母.槽顶(有槽)普通厚度六角头螺母.左旋ISO M或ISO MJ螺纹.４H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.) |
| NF L22-461-2000 | 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头螺母.ISO M或ISO MJ细牙螺纹.４H５H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.) |
| NF L22-462-2000 | 航空用螺栓和螺母.带锁紧孔、标准凸起度扁六角头螺母.左旋ISO M或ISO MJ细牙螺纹.４H５H公差级 | (Aircraft bolts and nuts - Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class.) |
| NF L22-512-2001 | 航空螺栓和螺母.MoS2润滑的、镀镉、钢制、带扩孔和系留垫圈的、ISO M或ISO MJ螺纹的自锁定六角螺母.等级:11 | (Aircraft bolts and nuts - Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambian) |
| NF L22-519-2000 | 航空用螺栓和螺母.自锁十二角头螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1550MPa(室温)/235℃ | (Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 oC.) |
| NF L22-525-2001 | 航空螺栓和螺母.钢制、镀镉、MoS2润滑的、细螺距螺纹、ISO M螺纹、自锁紧双六角头螺母.等级:1100MPa(室温)/ | (Aircraft bolts and nuts - Nuts, bihexagonal, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC.) |
| NF L22-541-2001 | 航空螺栓和螺母.钢制、镀镉、MoS2润滑的、ISO M或ISO MJ螺纹自锁紧六角头螺母.等级:1100MPa(室温)/235℃或 | () |
| NF L22-567-2001 | 航空螺栓和螺母.钢制、镀镉、MoS2润滑的、ISO M或ISO MJ螺纹、带扩孔的双耳自锁紧固定螺母.等级:1100MPa(室 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) |
| NF L22-568-2000 | 航空用螺栓和螺母.单耳埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperat) |
| NF L22-569-2000 | 航空用螺栓和螺母.90度角埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M ou ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempeer) |
| NF L22-570-2000 | 航空用螺栓和螺母.60度角埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempera) |
| NF L22-571-2000 | 航空用螺栓和螺母.双耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2 | (Aircraft bolts and nuts - Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at am) |
| NF L22-572-2000 | 航空用螺栓和螺母.单耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-573-2000 | 航空用螺栓和螺母.90度角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温) | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-574-2000 | 航空用螺栓和螺母.锐角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa () |
| NF L22-575-2000 | 航空用螺栓和螺母.双耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient t) |
| NF L22-576-2000 | 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambien) |
| NF L22-577-2000 | 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 M) |
| NF L22-587-2000 | 航空用螺栓和螺母.双耳埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/235 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M ou ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperatu) |
| NF L22-588-2000 | 航空用螺栓和螺母.镀银不锈钢制深槽单耳内锁紧系留螺母.ISO M或ISO MJ螺纹.分类:1100 MPa/425度(室温下) | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L22-589-2000 | 航空用螺栓和螺母.90度角埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/23 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient tempe) |
| NF L22-590-2000 | 航空用螺栓和螺母.60度角埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/42 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M ou ISO MJ threads,in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L22-591-2000 | 航空用螺栓和螺母.双耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated - Classification : 1 100 MPa (at a) |
| NF L22-592-2000 | 航空用螺栓和螺母.单耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (a) |
| NF L22-593-2000 | 航空用螺栓和螺母.90度角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa () |
| NF L22-594-2000 | 航空用螺栓和螺母.锐角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa) |
| NF L22-595-2000 | 航空用螺栓和螺母.双耳扁埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa | (Aircraft bolts and nuts - Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient) |
| NF L22-596-2000 | 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/ | (Aircraft bols and nuts - Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambien) |
| NF L24-030-1997 | 航空航天系列.镍基合金NI-PH2601(铬镍铁合金718)制耐热MJ螺纹螺栓.等级:1275MPA(室温)/650℃.技术规范(欧洲 | (AEROSPACE SERIES. BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2583).) |
| NF L24-101-1994 | 航空航天系列.钝化耐热和抗腐蚀短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/425度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) /425 DEGREES C. (EUROPEAN STANDARD EN 3052).) |
| NF L24-102-1997 | 航空和航天系列.凸台,细六角头,紧配合公差柄,短螺纹,阳极化,MOS2润滑,钛合金制螺栓.等级:1100MPA(室温下)/3 | (Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.) |
| NF L24-103-1995 | 航空航天系列.阳极化、MOS2润滑的短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/315度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2549).) |
| NF L24-104-1995 | 航空航天系列.镀镉合金钢的短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2859).) |
| NF L24-105-1995 | 航空航天系列.钝化耐腐蚀钢的短螺纹紧公差标准手柄标准六角螺栓.分类:600MPA(环境温度)/425度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2887).) |
| NF L24-106-1995 | 航空航天系列.钝化耐腐蚀钢的短螺纹粗公差标准手柄标准六角螺栓.分类:600MPA(环境温度)/425度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2888).) |
| NF L24-107-1995 | 航空航天系列.镀镉合金钢的短螺纹粗公差标准手柄标准六角螺栓.分类:900MPA(环境温度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2889).) |
| NF L24-108-1995 | 航空航天系列.镀镉合金钢的带螺纹头的标准六角螺栓.分类:900MPA(环境温度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3112).) |
| NF L24-116-1994 | 航空和航天系列.耐热钢FE-PA92HT(A286)用螺栓,六角头,后角刀,长螺纹.分类.900MPa(室温)/650℃ | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3006).) |
| NF L24-118-1998 | 航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P100HT(INCONEL 718).分类:1275MPA(在环境温度下)/65 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3008).) |
| NF L24-119-1998 | 航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P100HT(INCONEL 718),镀银.分类:1275MPA(在环境温度 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED. CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3009).) |
| NF L24-120-1998 | 航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P101HT(WASPALOY).分类:1210MPA(在环境温度下)/730摄 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3010).) |
| NF L24-121-1998 | 航空航天系列.螺栓,六角头,脱开杆,长螺纹耐热镊合金NI-P101HT(WASPALOY)镀银.分类:1210MPA(在环境温度下)/7 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3011).) |
| NF L24-179-1995 | 航空航天系列.镀镉合金钢的带螺纹头有槽平头螺栓.分类:900MPA(环境温度)/235度 | (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2649).) |
| NF L24-211-1994 | 航空和航天系列.耐热钢FE-PA92HE用螺栓,双六角头,后角刀和长螺纹.分类.900MPa(室温)/650℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-224-1994 | 航空和航天系列.耐热镍基合金NI-P101HT用螺栓,双六角头,紧公差柄,中长螺纹.分类.1210MPa(室温)/730℃ | (AEROSPACE SERIES. BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (NORME EUROPEENNE EN 3063).) |
| NF L24-228-1996 | 航空和航天系列.用MoS2润滑阳极化钛合金制短螺纹紧公差标准柄标准双六角头螺栓.分类:1100MPa(环境温度)/315 | (AEROSPACE SERIES. BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2870).) |
| NF L24-229-1996 | 航空和航天系列.钝化耐热镍基合金制制中长螺纹紧公差标准柄大六角头螺栓.分类:1550MPa(环境温度)/315℃(欧 | (AEROSPACE SERIES. BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED. CLASSIFICATION : 1550 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2874).) |
| NF L24-381-1994 | 航空和航天系列.耐热钢FE-PA92HE(A286)用螺栓,双六角头,后角刀和长螺纹.分类.900MPa(室温)/650℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286). Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-971-1995 | 航空和航天系列.镀镉合金钢用短螺纹紧公差薄六角头削角边螺栓.分类.1100MPa(室温)/235℃ | (Aerospace series. Bolts, shoudered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 degrees celsius.) |
| NF L31-521-1988 | 航空和航天系列.钢制光面耐腐蚀球头螺栓.无槽沟的连接.尺寸和负载 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads.) |
| NF L31-522-1988 | 航空和航天系列.钢制光面球头螺栓.有槽沟的连接.尺寸和负载 | (Aerospace series. Bearings-spherical plain in steel with assembly slots. Dimensions and loads.) |
| NF L31-553-1988 | 航空和航天系列.自润滑油封防腐球头螺栓和宽内垫圈.尺寸和负载 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads.) |
| NF L31-554-1988 | 航空和航天系列.轻系列自润滑油封钢制耐腐蚀球头螺栓的钢球头螺栓 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, light series. Dimensions and loads.) |
| NF L31-555-1988 | 航空和航天系列.标准系列自润滑油封钢制耐腐蚀球头螺栓.尺寸和负载 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, normal series. Dimensions and loads.) |
| NF L35-172-1990 | 航空和航天系列.带螺纹杆和自润滑油封球头螺栓的可调底座.尺寸和负载.(欧洲标准 EN 2498) | (AEROSPACE SERIES. ROD ENDS,AJUSTABLE SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AN THREADED SHANK. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2498).) |
| NF L43-312-1973 | 低压旋转接头的空心螺栓 | (SWIVEL CONNECTORS FOR LOW PRESSURE APPLICATIONS,BANJO BOLT.) |
| NF L46-211-1988 | 航空航天.流体系统用奥米加夹紧装置(骑马螺栓).尺寸 | (AEROSPACE. OMEGA CLAMPS (SADDLE CLAMPS) FOR FLUID SYSTEMS. DIMENSIONS.) |
| NF L92-211-1980 | 用作机上装卸机件的中空固定螺栓.ＩＳＯ米制螺纹剖面和BNAE公差 | (Fastening eye bolts for aircraft handling equipment with metric ISO thread. Profile and BNAE tolerances.) |
| NF L92-221-1980 | 用作机上装卸机件的中空固定螺栓.ＩＳＯ米制螺纹剖面和公差.加强型 | (Fastening eye bolts for aircraft handling equipment with metric ISO thread profile and tolerances. Strengthened type.) |
| NF M81-450-1989 | 煤矿器材.树脂地脚螺栓.规格和试验方法 | (MINING EQUIPMENT. RESIN ANCHOR BOLTS. SPECIFICATIONS AND TEST METHODS.) |
| NF M87-400-1984 | 石油工业.带外部杆和螺栓盖的钢制阀门.法兰或焊接端点ＩＳＯＰＮ２０．ＩＳＯＰＮ４２０ | (Petroleum industry. Steel gate valves with-on flanges and joints. ISO PN 20 to ISO PN 420.) |
| NF P22-430-1982 | 金属结构.非预应力螺栓连接.构件及螺栓的设计 | (Metal construction. Assembly by non-prestressed bolts. Conditions of construction and design of the bolts.) |
| NF P22-431-1978 | 金属结构.非预应力螺栓连接.连接施工 | (METAL CONSTRUCTION. ASSEMBLY BY NON PRESTRESSED BOLTS. EXECUTION OF ASSEMBLIES.) |
| NF P22-460-1979 | 金属结构.可控拉紧螺栓连接.构造规定和螺栓计算 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. STRUCTURES REQUIREMENTS AND CHECKING OF JOINTING.) |
| NF P22-461-1979 | 金属结构.可控拉紧螺栓连接.常规摩擦系数测定 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. DETERMINAITON OF THE CONVENTIONAL COEFFICIENT OF FRICTION.) |
| NF P22-462-1978 | 金属结构.可控拉紧螺栓连接.连接件制造和准备 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. FABRICATION AND PREPARATION OF JOINTS.) |
| NF P22-463-1978 | 金属结构.可控拉紧螺栓连接.连接施工 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. EXECUTION OF JOINTS.) |
| NF P22-466-1979 | 金属结构.可控拉紧螺栓连接.螺栓拉紧和检验方法 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. METHODS OF TIGHTENING AND CHECKING OF BOLTS.) |
| NF P22-468-1987 | 金属结构.可控拉紧螺栓连接.螺母控制旋转拉紧.旋转角测定 | (Steel construction. Bolted joints with controlled tightening. Tightening by controlled turn of nut. Determination of the angle of rotation.) |
| NF P22-469-1978 | 金属结构.可控拉紧螺栓连接.扭力扳手校准 | (METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. CALIBRATION OF TORQUE WRENCHES.) |
| NF P26-323-1999 | 建筑物五金.门窗螺栓.要求和试验方法 | (Building hardware - Door and window bolts - Requirements and test methods.) |
| NF P26-422-1949 | 五金.扣锁螺栓 | (HARDWARE. PADLOCK EYE.) |
| NF P37-414-1967 | 屋顶附件.钢板或冲压带钢制嵌有相应长度杆的螺栓卡箍 | (ROOFING ACCESSORIES. STAMPED SHEET OR STRIP METAL BOLT CLAMPS WITH INSERTED PIN.) |
| NF P37-415-1967 | 屋顶附件.带钢制嵌有相应长度杆的螺栓卡箍 | (ROOFING ACCESSORIES. STRIP METAL BOLT CLAMPS WITH INSERTED PIN.) |
| NF P37-416-1967 | 屋顶附件.带钢制嵌有廷长杆的螺栓卡箍 | (ROOFING ACCESSORIES. STRIP METAL BOLT CLAMPS WITH EXTENDED PIN.) |
| NF R16-217-1986 | 道路车辆.压燃内燃机用由定心螺栓固定和带水平法兰的单极燃油滤清器.安装和连接尺寸 | (ROAD VEHICLES. SINGLE FUEL FILTERS WITH HORIZONTAL FLANGES AND CENTRE BOLT FIXING FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.) |
| NF R16-218-1986 | 道路车辆.压燃内燃机用带水平法兰用螺栓固定的燃油滤清器头.安装和连接尺寸 | (ROAD VEHICLES. HEADS FOR SPIN-ON FUEL FILTERS WITH HORIZONTAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.) |
| NF R16-331-1986 | 道路车辆.柴油发动机.22型螺栓固定的喷嘴 | (ROAD VEHICLES. DIESEL ENGINES. SCREW-IN INJECTOR,TYPE 22.) |
| NF R47-203-1952 | 弹簧片固定螺栓 | (Spring leaves fastening bolts.) |
| NF R93-183-1980 | 电阻电焊钢螺钉、螺栓和螺母机械特性 | (MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.) |
| NF S83-261-1995 | 钟表业.吊环螺栓 | (Horology. Studs.) |
| NF T81-151-1977 | 化学产品的运输与装卸.道路罐车.用销或螺栓固定的阀门用圆盖 | (TRANSPORTATION AND HANDLING OF CHEMICALS. ROAD TANKERS. CAPS FOR VALVES FIXED BY PINS OR BOLTS.) |
| NF T81-152-1978 | 液态化学产品的运输与装卸.罐车.５００和６００圆顶盖.带扣钉螺栓的闭锁装置 | (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS. ROADS TANKERS. 500 AND 600 DOMCOVER. CLOSING DEVICES WITH CLAMPS.) |
| 编号 | 中文名称 | 英文名称 |