编号 | 中文名称 | 英文名称 |
ANSI/ASME B16.1-2005
| 25、125、250和800级铸铁管法兰和法兰配件
| Cast Iron Pipe Flanges and Flanged Fittings, Class 25, 125, 250, and 800
|
ANSI/ASME B16.42-1998
| 球墨铸铁管法兰和法兰配件
| Ductile Iron Pipe Flanges and Flanged Fittings
|
ANSI/ASME B16.45-1998
| Soventr排水系统用铸铁管件
| Cast Iron Fittings for Soventr Drainage Systems
|
ANSI/ASTM A182/A 182M-2001
| 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件规范
| Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
ANSI/ASTM D1599-1999
| 塑料管材、管道和管件短时液压故障压力试验方法
| Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
|
ANSI/ASTM D2152-1995
| 丙铜浸入挤压聚氯乙烯管材和模铸管件熔解充分性试验方法
| Test Method for Adequacy of Fusion of Extruded Poly (Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
|
ANSI/ASTM D2444-1999
| 热塑管材和管件耐冲击性落锤试验方法
| Test Method for Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
|
ANSI/ASTM D2468-1996
| 丙烯腈-丁二烯-苯乙烯共聚物塑料管材和管件规范,表 40
| Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
|
ANSI/ASTM D2671-2000
| 电气用热缩管件试验方法(10.02)
| Test Methods for Heat-Shrinkable Tubing for Electrical Use (10.02)
|
ANSI/ASTM D2855-1996
| 聚氯乙烯 (PVC)管材和管件溶剂接合连接件制作惯例
| Practice for Making Solvent-Cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings
|
ANSI/ASTM D2902-2000
| 含氟聚合物树脂热缩管件规范(10.02)
| Specification for Fluoropolymer Resin Heat-shrinkable Tubing for Electrical Insulation
|
ANSI/ASTM D2992-2001
| 玻璃纤维(玻璃纤维增强热固树脂)管件和配件获得静水压或压力设计基础的实施规程(08.04)
| Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings (08.04)
|
ANSI/ASTM D2996-2001
| 绕组线玻璃纤维(玻璃纤维增强热固树脂)管件和配件规范(08.04)
| Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe (08.04)
|
ANSI/ASTM D3144-2000
| 电绝缘用聚1,1-二氟乙烯热缩管件规范(10.02)
| Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
|
ANSI/ASTM D3261-1997
| 聚乙烯塑料管材和管道用对接热融合聚乙烯塑料管件规范
| Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
|
ANSI/ASTM D5677-2005
| 用于航空喷气机涡轮燃料的玻璃纤维(玻璃纤维加固热硬化树脂)管与管件规范.粘合剂粘接接头型
| Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
|
ANSI/ASTM F1336-2002
| 带密封垫的聚氯乙烯(PVC)下水道管件规范
| Specification for Poly (Vinyl Chloride) (PVC) Gasketed Sewer Fittings
|
ANSI/ASTM F1866-2005
| 管壁厚度40的聚氯乙烯(PVC)塑料排水管和DWV装配管件的规范
| Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
|
ANSI/ASTM F1961-2002
| 交联聚乙烯(PEX)管用带盘簧的金属机械冷压扩口式管件规范
| Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
|
ANSI/AWWA C105/A 21.5-2005
| 球墨铸铁管路系统用聚乙烯包装物
| Polyethylene Encasement for Ductile-Iron Pipe Systems
|
ANSI/AWWA C115/A 21.15-2005
| 带球墨铸铁或灰口铸铁螺纹法兰的法兰球墨铸铁管
| Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
|
ANSI/AWWA C150/A 21.50-2002
| 球墨铸铁管的厚度设计
| Thickness Design of Ductile-Iron Pipe
|
ANSI/SAE J1131-1998
| 汽车空气制动系统中使用的SAE J844d非金属管件和连接组件的性能要求
| Tubing and Fitting Assemblies Used in Automotive Air Brake Systems, Performance Requirements for SAE J844d Nonmetallic
|
ANSI/SAE J246-1994
| 球面及法兰式(压缩)套管管件
| Spherical and Flanged Sleeve (Compression) Tube Fittings
|
ANSI/SAE J514-1998
| 液压管件
| Hydraulic Tube Fittings
|
ANSI/SAE J530-1994
| 汽车管件接头
| Automotive Pipe Fittings
|
ANSI/UL 109-2004
| 易燃和可燃液体、制冷辅助设备和船上用管件的安全标准
| Standard for Safety for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
|
ANSI/UL 1684-2002
| 增强热固树脂管件和配件
| Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
|
ANSI/UL 797-2004
| 电气金属管件
| Electrical Metallic Tubing
|
ASME A112.19.1M Supplement 2-2
| 搪瓷铸铁管道固定件.补充件2
| (Enameled cast iron plumbing fixtures - Supplement 2)
|
ASME A112.19.1M-1994
| 搪瓷铸铁管道固定件
| (Enameled cast iron plumbing fixtures)
|
ASME B16.1-1998
| 铸铁管法兰及法兰配件.等级25、125和250
| (Cast iron pipe flanges and flanged fittings - Classes 25, 125, and 250)
|
ASME B16.12-1998
| 铸铁螺纹排水管件
| (Cast iron threaded drainage fittings)
|
ASME B16.15-1985
| 铸青铜螺纹管件
| (Cast bronze threaded fittings)
|
ASME B16.18-2001
| 铸铜合金软钎焊连接压力管件
| (Cast copper alloy solder joint pressure fittings)
|
ASME B16.23-2002
| DWV类铸铜合金钎焊连接排水管件
| (Cast copper alloy solder joint drainage fittings: DWV)
|
ASME B16.42-1998
| 球墨铸铁管法兰及法兰配件.等级150和300
| (Ductile iron pipe flanges and flanged fittings - Classes 150 and 300)
|
ASME B16.5-1996
| 管法兰和法兰管件.NPS 1/2 - NPS 24
| (Pipe flanges and flanged fittings - NPS 1/2 through NPS 24)
|
ASME B16.5a Addenda-1998
| 管法兰和法兰管件.NPS 1/2至NPS 24.附录
| (Pipe flanges and flanged fittings - NPS 1/2 through NPS 24; Addenda)
|
ASTM A 182/A 182Ma-2005
| 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件的标准规范
| Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
ASTM A 338-1984
| 铁路,船舶和其他重型装备在温度达到650华氏度(345摄氏度)时使用的可锻铸铁法兰,管件和阀门零件
| Malleable Iron Flanges, Pipe Fittings and Valve Parts for Railroad, Marine and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C)
|
ASTM A 674-2005
| 水或其他液体用球墨铸铁管的聚乙烯包装物的标准实施规程
| Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
|
ASTM B 903-2000
| 内部增强的无缝铜热交换器管件的标准规范
| Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
|
ASTM C 450-2002
| 公称尺寸的管件、容器隔热层用绝热配件覆盖物生产的标准实施规范
| Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
|
ASTM C 668-1998
| 石棉水泥传输管件标准规范
| Standard Specification for Asbestos-Cement Transmission Pipe
|
ASTM D 2661-2002
| 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料排水管、污水管和通气管及其管件.附表40
| Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
|
ASTM D 2665a-2004
| 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范
| Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
|
ASTM F 1336-2002
| 衬垫聚氯乙烯(PVC)物的下水道管件的标准规范
| Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
|
ASTM F 1961a-2002
| 交联聚乙烯(PEX)管用带盘簧的金属机械冷扩口加压管件的标准规范
| Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
|
ASTM F 2080-2005
| 交联聚乙烯(PEX)管用带金属压缩套的冷膨胀管件的标准规范
| Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
|
ASTM F 2159-2005
| SDR9交联聚乙烯(PEX)管用利用铜挤压环的塑料插入管件的标准规范
| Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing |
ASTM F 876-2005
| 交联聚乙烯(PEX)管件的标准规范
| Standard Specification for Crosslinked Polyethylene (PEX) Tubing
|
UL 1821-2003
| 消防设备用热塑性塑料喷水器的管及其管件
| (Thermoplastic sprinkler - Pipe and fittings for fire protection service)
|
编号 | 中文名称 | 英文名称 |