德国铸铁管标准(DIN cast iron pipe standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
DIN 11832-1-1990 农场和牲畜饲养设备.输送液态粪肥的管道用阀门管件.第1部分:最大1巴的静压力闸阀 Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar
DIN 11861-1976 饮料和乳品用管件.橡胶密封圈.要求和试验 Drink- and dairy fittings; sealing rings made of elastomeric materials, requirements testing
DIN 11867-2005 无菌、化学和制药工业的生铁系统用弯头、不锈钢焊接管件 Elbows for pigging systems, welding fittings in stainless steel, for aseptic, chemical and pharmaceutical industries
DIN 12918-1-1999 实验室设备.实验室管件.第1部分:水阀 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 16831-6-2003 管道连接件和压力管用聚丁烯(PB)元件.PB 125. 第6部分:电阻焊管件.尺寸 Pipe joints and components of polybuten (PB) for pipes under pressure - PB 125 - Part 6: Fittings for resistance-welding; Dimensions
DIN 16962-9-1983 1型和2型聚丙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸 Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
DIN 16963-14-1983 1型和2型高密度聚乙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸 Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
DIN 16963-9-1980 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑三通管件.尺寸 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
DIN 16966-4-1982 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.三通喷管嘴尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions
DIN 16966-5-1982 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.缩径管.尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions
DIN 16966-6-1982 玻璃纤维增强聚酯树管(UP-GF)管件和接头组件.卡圈、法兰、密封圈、尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions
DIN 16966-8-1982 玻璃纤维增强聚酯管(UP-GF)管件和接头.层压塑料接头.尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions
DIN 16967-2-1982 玻璃纤维增强环氧树脂(EP-GF)管件和接头.弯管、三通管、尺寸 Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions
DIN 19522-2000 无承口的铸铁排水管和管件 Cast iron drainage pipes and fittings without sockets (SML)
DIN 19534-3-2000 非压力地下排水和污水排放用带环形密封承口的硬聚氯乙烯(PVC-U)管和管件.第3部分:质量控制和安装 Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) with ring seal socket for non pressure underground drainage and sewerage - Part 3: Quality control and installation
DIN 19535-10-2000 建筑物内耐热水排污系统(HT)用高密度聚乙烯(PE-HD)管和管件.第10部分:防火性能、质量控制和安装的推荐规范 High-density polyethylene (PE-HD) pipes and fittings for hot-water resistant waste and soil discharge systems (HT) inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
DIN 19561-10-1999 建筑物内部耐热水的废水和污物排放系统用苯乙烯共聚物制管和管件.第10部分:燃烧性能、质量控制和安装的推荐 Pipes and fittings made of styrene-copolymerisats for hot water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
DIN 19585-1976 下水道管件.铸铁管件、混凝土管件及与铸铁相连的混凝土制管件的交货技术条件 Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron
DIN 19585-1976 下水道管件.铸铁管件、混凝土管件及与铸铁相连的混凝土制管件的交货技术条件 Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron
DIN 19695-1977 混凝土管、钢筋混凝土管及预应力混凝土管、管件和混凝土检查井的筒圈的运输和储存说明书 Directions for transporting and storing of concrete pipes, reinforced concrete pipes, prestressed concrete pipes and fittings and concrete manhole shaft rings
DIN 19807-1977 石棉水泥压力管道的专用铁铸件.铸铁管的连接件 Cast iron special castings for asbestos cement pressure pipelines; joining pieces at cast iron pipes
DIN 2410-3-1978 管件.混凝土、钢筋混凝土和预应力混凝土管件的标准的综述 Pipes; Survey of Standards for Pipes from Concrete, Reinforced Concrete and Prestressed Concrete
DIN 24150 Bb.1-1990 通风设备.金属管件和管接头的连接.VO型连接的示例 Ventilation equipment; joints for metal tubes and fittings; examples of type VO joints
DIN 24150-1990 通风设备.金属管件和管接头的连接 Ventilation equipment; joints for metal tubes and fittings
DIN 2605-2-1995 对焊管件.弯管.第2部分:全利用率的相关性 Butt welding fittings - Elbows - Part 2: Full correlation of utilization
DIN 2615-1-1992 对焊钢制管件.带有换算压力系数的丁字管接 Steel butt-welding pipes fittings; tees with reduced pressure factor
DIN 2615-2-1992 对焊钢制管件.在全工作压力下使用的丁字管接 Steel butt-welding pipe fittings; tees for use at full service pressure
DIN 28601-2000 延性铸铁管道和配件.螺纹套管接头.组件、套管、螺丝环、密封环和滑动环 Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings
DIN 28602-2000 球墨铸铁管及管件.栓接压盖密封接头.组件、套管、中间环、密封圈、螺栓和螺母 Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts
DIN 28602-2000 球墨铸铁管及管件.栓接压盖密封接头.组件、套管、中间环、密封圈、螺栓和螺母 Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts
DIN 28603-2002 可锻铸铁管道和配件.插入式连接件.测量、管座和密封垫 Ductile iron pipes and fittings - Push-in joints - Survey, sockets and gaskets
DIN 2880-1999 铸铁管、钢管和管接头的水泥砂浆管衬料的应用 Application of cement mortar lining for cast iron pipes, steel pipes and fittings
DIN 30674-2-1992 球墨铸铁管用水泥砂浆涂层.要求和检验 Cement mortar coatings for ductile iron pipes; requirements and testing
DIN 30674-3-2001 护套式可塑铸铁管道.第3部分:带护套保护的镀锌层 Sheathing ductile cast iron pipes - Part 3: Zinc coating with protective sheathing
DIN 30674-5-1985 球墨铸铁管的外部防护.聚乙烯护套 External protection of ductile cast iron pipes; polyethylene sleeving
DIN 30675-2-1993 掩埋管道的外部防腐.球墨铸铁管的防腐蚀系统 External corrosion protection of buried pipes; corrosion protection systems for ductile iron pipes
DIN 30677-2-1988 埋设管件的外部防腐处理.第2部分:加厚式热固性塑料涂层 External corrosion protection of buried valves; heavy-duty thermoset plastics coatings
DIN 32676-2001 饮食业、化工业和医药业用管件.不锈钢管卡箍连接.焊接式 Fittings for the food, chemical and pharmaceutical industries - Clamp connections for stainless steel tubes - Weld-on type
DIN 3475-1993 未处理水和可饮用水用的球墨铸铁管阀和管接头.内部涂搪瓷防腐蚀.质量要求和试验 Valves and fittings of spheroidal cast iron for untreated and potable water; corrosion protection by internal enamelling; quality requirements, testing
DIN 3535-5-1993 煤气供气密封件:煤气管件和煤气设备用橡胶、软木和合成纤维制密封材料.安全性试验要求 Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests
DIN 3544-1-1985 高密度聚乙烯(HDPE)管件.第1部分:攻螺纹管件的要求和试验 High-density polyethylene (HDPE) valves; tapping valves; requirements and test
DIN 3852-2-2000 管件和阀门用管堵和螺纹孔.带惠氏管螺纹的螺塞.各类的总成本 Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types
DIN 49012-1982 电气装置用导管和管件.用于重机械应力的金属软管.结构形式和要求 Conduits and fittings for electrical installation; flexible metal conduits for heavy mechanical stresses construction types and requirements
DIN 6653-1-2004 饮料自动售货系统.附件.第1部分:饮料或基本材料管件 Beverage dispensing systems - Accessories - Part 1: Beverage or base material pipework
DIN 71401-2-1972 第2部分:第2部分:内燃机排液管件 Drain valves for internal combustion engines
DIN 8061 Bb.1-1984 未增塑聚氯乙烯管.PVC-U管和管件的耐化学性 Unplasticized polyvinylchloride pipes; chemical resistance of pipes and fittings of (PVC-U)
DIN 8062-1988 未增塑聚氯乙烯管件(PVC-U.PVC-H).尺寸 Unplasticized polyvinyl chloride (PVC-U, PVC-HI) pipes; dimensions
DIN 8075 Bb.1-1984 高密度聚乙烯管(HDPE).管和管件的耐化学性 High density polyethylene (HDPE) pipes; chemical resistance of pipes and fittings
DIN 8078 Bb.1-1982 聚丙烯(PP)管.管和管件的抗化学性 Pipes of polypropylene (PP); chemical resistance of pipes and fittings
DIN 85004-4-2002 铜镍合金管.第4部分:管件技术规范 Pipelines made of copper-nickel-alloys - Part 4: Technical specification for tubes
DIN 86200-1989 灭火和甲板冲洗设备.软管接头.管件.软管.附件.造船用各类管件产品概要 Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding
DIN 86286-1995 船上卫生设备.卫生间装备和管件的布置 Sanitary furnishing on ships - Positioning of sanitary objects and fittings
DIN EN 10242/A2-2003 可锻铸铁制螺纹管件.修正A2 Threaded pipe fitting in malleable cast iron; Amendment A2; German version EN 10242:1994/A2:2003
DIN EN 10253-1-1999 对焊管管件.第1部分:一般用途和无特殊检验要求的锻造碳钢 Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements; German version EN 10253-1:1999
DIN EN 10284-2000 聚乙烯(PE)管道系统用带压缩端的可锻铸铁管件 Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems; German version EN 10284:2000
DIN EN 10284-2000 聚乙烯(PE)管道系统用带压缩端的可锻铸铁管件 Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems; German version EN 10284:2000
DIN EN 10298-2005 岸上和海底管路用钢管和管件.水泥灰浆内衬.德文版本EN 10298-2005 Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005
DIN EN 1092-2-1997 法兰及其连接.按PN标注的管、管件、异形件和附件用圆形法兰.第2部分:铸铁法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges; German version EN 1092-2:1997
DIN EN 1111-1998 卫生设备管件.恒温混合阀(PN 10).通用技术规范 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998
DIN EN 1112-1997 盥洗室(PN 10)管件用淋浴喷头 Shower outlets for (PN 10) sanitary tapware; German version EN 1112:1997
DIN EN 1113-1997 盥洗室(PN 10)管件用淋浴喷头软管 Showers hoses for (PB 10) sanitary tapware; German version EN 1113:1997
DIN EN 1123-2-1999 带插接套管废水管道.纵向焊缝热镀锌钢管道和管件.第2部分:尺寸 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions; German version EN 1123-2:1999
DIN EN 1123-3-2005 废水系统用带插接套的长焊缝焊接热浸镀锌钢管制管道和管件.第3部分:真空排水系统和船上排水系统的尺寸和特 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
DIN EN 1124-2-1999 带插接套管废水管道.纵向焊缝不锈钢制造管和管件.第2部分:S系统.尺寸 Pipes and fittings of longitudinally welded stainless steel pipes, with spigot and socket for waste water systems - Part 2: Systeme S; dimensions; German version EN 1124-2:1999
DIN EN 1124-3-1999 带插接套管废水管道.纵向焊缝不锈钢制造管和管件.第3部分:X系统.尺寸 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X; dimensions; German version EN 1124-3:1999
DIN EN 12107-1997 塑料管道系统.注塑热塑性塑料配件、阀门和附件.注塑热塑材料管件持久静液压强度的测定 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
DIN EN 12200-1-2001 地上露天用塑料雨水管道系统.未增塑聚氯乙烯.第1部分:管、管件和管道系统规范 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems; German version EN 12200-1:2000
DIN EN 12201-3-2003 供水用塑料管道系统.聚乙烯.第3部分:管件 Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings; German version EN 12201-3:2003
DIN EN 12293-1999 塑料管道系统.冷、热水用热塑性塑料管道和管件.检验已安装的组件耐温度循环的试验方法 Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling; German version EN 12293:1999
DIN EN 12295-1999 塑料管道系统.热水和冷水用热塑性塑料管和相关管件.管接头耐循环压力的检测方法 Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999
DIN EN 12342-1998 用于麻醉器和人工呼吸器的呼吸管件 Breathing tubes intended for use with anaesthetic apparatus and ventilators; German version EN 12342:1998
DIN EN 1254-4-1998 铜和铜合金.管配件.第4部分:把其它连接端头和毛细管或压力接头相连接的管件 Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; German version EN 1254-4:1998
DIN EN 12842-2000 PVC-U或PE管道系统用球墨铸铁管件.要求和试验方法 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods; German version EN 12842:2000
DIN EN 12842-2000 PVC-U或PE管道系统用球墨铸铁管件.要求和试验方法 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods; German version EN 12842:2000
DIN EN 1286-1999 卫生器具管件.低压机械调混合阀.通用技术规范 Sanitary tapware - Low pressure mechanical mixing valves; general technical specification; German version EN 1286:1999
DIN EN 1287-1999 卫生器具管件.低压恒温混合阀.通用技术规范 Sanitary tapware - Low pressure thermostatic mixing valves; general technical specification; German version EN 1287:1999
DIN EN 13312-4-2001 生物技术.管路和仪器性能准则.第4部分:管件 Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes; German version EN 13312-4:2001
DIN EN 1401-1-1998 非压力地下排水和污水用塑料管道系统.硬聚氯乙烯(PVC-V).第1部分:管、管件和系统规范 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998
DIN EN 14364-2006 压力和无压力排水和排污塑料管道系统.基于不饱和聚酯树脂的玻璃增强热固性塑料(GRP)系统.管件、配件和连接 Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints; German version EN 14364:2006
DIN EN 14424-2005 带螺旋箍的软管管件 Hose fittings with screwed ferrules; German version EN 14424:2004
DIN EN 1452-3-1999 供水用塑料管道系统.无增塑聚氯乙烯(PVC-U).第3部分:管件 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings; German version EN 1452-3:1999
DIN EN 1455-1-1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道、管件和系 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999
DIN EN 14628-2006 球墨铸铁管、配件和附件.管外层聚乙烯涂层.要求和试验方法 Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods; German version EN 14628:2005
DIN EN 14758-1-2006 无压地下排水和污水塑料管道系统.有矿物调节剂的聚丙烯(PP-MD)管道系统.第1部分:管、管件和系统规范.德文版 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2005
DIN EN 14870-1-2005 石油和天然气工业.管道输送系统用进气弯头、管件和法兰.第1部分:进气弯头 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified); English version EN 14870-1:2004
DIN EN 14870-2-2005 石油和天然气工业.管道输送系统用进气弯管、管件和法兰.第2部分:管件 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified); English version EN 14870-2:2004
DIN EN 14901-2006 球墨铸铁管、配件和附件.球墨铸铁配件及附件的环氧涂层(重载).要求和试验方法 Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods; German version EN 14901:2006
DIN EN 1519-1-2000 建筑结构中排污(低温和高温)用塑料管道系统.聚乙烯(PE).第1部分:管、管件和系统的规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 1519-1:1999
DIN EN 1565-1-1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.苯乙烯共聚掺混料(SAN+PVC).第1部分:管道、管件和系 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system; German version EN 1565-1:1998
DIN EN 1566-1-1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.氯化聚氯乙烯(PVC-C).第1部分:管道、管件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998
DIN EN 200-2005 卫生设备管件.单排阀和混合阀(PN 10).一般技术规范 Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification; German version EN 200:2004
DIN EN 545-2002 水管路用延性铸铁管道、配件、附件及其接头.要求和试验方法; 德文版本 EN 545:2002 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:2002
DIN EN 598-1994 排污设施用球墨铸铁管、管件、附件及连接件.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods; German version EN 598:1994
DIN EN 598-1994 排污设施用球墨铸铁管、管件、附件及连接件.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods; German version EN 598:1994
DIN EN 705-1994 塑料管道系统.玻璃纤维增强热固塑料管和管件.回归分析和应用方法 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994
DIN EN 714-1994 热塑管道系统.压力管道和模压管件之间无末端承载的橡胶密封圈连接件.无端部拉力的流体静力内压力下的密封性 Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994
DIN EN 723-1996 铜和铜合金.燃烧法测定铜管或管件内表面碳素的方法 Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings; German version EN 723:1996
DIN EN 727-1995 塑料管道和管道输送系统.热塑塑料管和管件.维卡软化温度(VST)的测定; 德文版本 EN 727:1994 Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994
DIN EN 736-1-1995 管件.术语.第1部分:管件型号定义; 德文版本 EN 736-1:1995 Valves - Terminology - Part 1: Definition of types of valves; German version EN 736-1:1995
DIN EN 802-1994 塑料管道和管道输送系统.压力管道系统用喷铸热塑管件.压碎造成最大变形的试验方法; 德文版本 EN 802:1994 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994
DIN EN 803-1994 塑料管道系统.压力管道用橡胶密封圈连接件的热塑喷铸管件.无端部拉力的抗瞬时内压的试验方法; 德文版本 EN Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994
DIN EN 804-1994 塑料管道系统.压力管道用带胶粘套管连接件的热塑喷铸管件.抗流体静力瞬时内压能力的试验方法; 德文版本 EN Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994
DIN EN 817-1997 卫生设备管件.机械混合器(PN10).通用技术规范 Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications; German version EN 817:1997
DIN EN 877-2000 建筑物排水用铸铁管道、管件及其接头和附件.要求、试验方法和质量保证 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999
DIN EN 877-2000 建筑物排水用铸铁管道、管件及其接头和附件.要求、试验方法和质量保证 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999
DIN EN 922-1995 塑料管道和管道输送系统.未增塑聚氯乙烯管和管件.测定粘度数值和K值计算用试样制备; 德文版本 EN 922:1994 Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value; German version EN 922:1994
DIN EN 969-1995 燃气管道用球墨铸铁管、管件、附件及其接头.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995
DIN EN 969-1995 燃气管道用球墨铸铁管、管件、附件及其接头.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995
DIN EN 969/A1-1999 球墨铸铁管、管接头、附件及其连接件.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995/A1:1998
DIN EN ISO 3822-1-1999 声学.实验室检测供水设备管件和装置噪声.第1部分:测量方法 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999); German version EN ISO 3822-1:1999
DIN EN ISO 3822-3-1997 声学.实验室检测供水站装置和设备噪音特性.第3部分:管线管件的连接和操作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997); German version EN ISO 3822-3:1997
DIN EN ISO 3822-4-1997 声学.实验室检测供水站装置和设备噪音特性.第4部分:特殊管件连接和操作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances (ISO 3822-4:1997); German version EN ISO 3822-4:1997
DIN EN ISO 6708-1995 管件.DN(公称尺寸)的定义和选择 (ISO 6708:1995); 德文版本 EN ISO 6708:1995 Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995); German version EN ISO 6708:1995
DIN EN ISO 8434-4-2000 液压及通用金属管件连接.第4部分:接头焊有O形密封圈的24度锥体连接件 Metallic tube connections for fluid power and general use - Part 4: 24° cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000
DIN ISO 3586-1976 玻璃装置.玻璃管和管件.检验、搬运和使用的一般规则 Glass plant, pipeline and fittings; general rules for testing, handling and use
编号中文名称英文名称

返回