编号 | 中文名称 | 英文名称 |
BS 1640-1-1962
| 石油工业用钢对焊管管件规范.第1部分:锻制碳钢与铁素体合金钢管件
| Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought carbon and ferritic alloy steel fittings
|
BS 1640-4-1968
| 石油工业用钢对焊管管件规范.第4部分:锻造和铸造奥氏体铬镍钢管件:米制单位
| Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings - Metric units
|
BS 3868-1995
| 预制排水用镀锌钢管件规范
| Specification for prefabricated drainage stack units in galvanized steel
|
BS 416-1-1990
| 砂型铸造或离心铸造的排水和通风铸铁管及管件.第1部分:插承套管系统规范
| Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron - Specification for spigot and socket systems
|
BS 460-2002
| 雨水排放用铸铁管件.规范
| Cast Iron rainwater goods - Specification
|
BS 4677-1984
| 输送液体用奥氏体不锈钢管件的电弧焊规范
| Specification for arc welding of austenitic stainless steel pipework for carrying fluids
|
BS 5667-5-1979
| 连续式机械装卸设备规范.安全性要求.第5部分:松散物料:气动装卸用连接器与软管件
| Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: couplings and hose components used in pneumatic handling
|
BS 569-1973
| 石棉水泥雨水管件规范
| Specification for asbestos-cement rainwater goods
|
BS 759-1-1984
| 锅炉与锅炉连接管路用阀门、水位计及其它安全管件.第1部分:阀门、安装件和管件规范
| Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers - Specification for valves, mountings and fittings
|
BS 7892-2000
| 水泥砂浆衬砌的可锻铁管和管件密封涂层规范
| Specification for seal coats on cement mortar lined ductile iron pipes and fittings
|
BS 864-3-1975
| 铜和铜合金制毛细管与承压管管件.第3部分:聚乙烯管用承压管件
| Capillary and compression tube fittings of copper and copper alloy - Compression fittings for polyethylene pipes
|
BS EN 10329-2006
| 海上或离岸管道用钢管和管件.外部连接包覆层
| Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
BS EN 12107-1998
| 塑料管道系统.注射模塑热塑性塑料管件、阀门和辅助设备.注射模塑管道元件用热塑性材料的长期液压强度的测定
| Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
|
BS EN 12117-1998
| 塑料管道系统.管件、阀门和附件.气体流速与压降之间关系的测定
| Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
|
BS EN 12585-1999
| 玻璃装置、管道和管件.DN 15至DN 1000的管道和管件.兼容性和可互换性
| Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability
|
BS EN 14424-2005
| 带螺旋箍的软管管件
| Hose fittings with screwed ferrules
|
BS EN 14901-2006
| 球墨铸铁管、配件和附件.球墨铸铁配件及附件的环氧涂层(重载).要求和试验方法
| Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
|
BS EN 274-2-2002
| 卫生器具用下水道管件.试验方法
| Waste fitting for sanitary appliances - Test methods
|
BS EN 295-6-1996
| 排水管和污水管用陶制管、管件及管接头.陶制管人孔的要求
| Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes
|
BS EN 295-7-1996
| 排水管和污水管用陶制管、管件及管接头.陶制管和管插接接头的要求
| Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking
|
BS EN 545-2002
| 水管道用球墨铸铁管、配件、附件及其接头.要求和试验方法
| Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
|
BS EN 598-1995
| 污水工程用球墨铸铁管、接头、配件及其连接件.要求和试验方法
| Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
|
BS EN 60423-1995
| 电气设备用导管.电气装置用导管的外径和导管及管件的螺纹
| Conduits for electrical purposes - Outside diameters of conduits for electrical installations and threads for conduits and fittings
|
BS EN 682-2002
| 弹性密封件.运送气体和液态碳氢化合物的管件及配件中用的密封件的材料要求
| Elastomeric seals - Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
|
BS EN 713-1995
| 塑料管道系统.管件和聚烯烃压力管的机械连接.组件承受弯曲作用时内部压力密封性的试验方法
| Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
|
BS EN 714-1995
| 热塑管道系统.压力管和模塑管件的无端负荷弹性密封环型连接件.在无轴向推力时内部流体静压力下密封性的试验
| Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust
|
BS EN 804-1995
| 塑料管道系统.压力管道溶剂胶粘接头的注射模塑承口连接管件.短期内部液压压力的试验方法
| Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
|
BS EN 877-1999
| 建筑物排水用铸铁管和配件及其接头和附件.要求、试验方法和质量保证
| Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
|
BS EN 969-1996
| 煤气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法
| Specification for ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
|
BS EN ISO 12162-1996
| 压力用热塑性塑料管道和管件.分类和设计.总体使用(设计)系数
| Thermoplastics materials for pipes and fittings for pressure applications - Classification and design - Overall service (design) coefficient
|
BS EN ISO 1746-2001
| 橡胶或塑料软管和管件.弯曲试验
| Rubber or plastics hoses and tubing - Bending tests
|
BS EN ISO 6708-1996
| 管件.标称尺寸的定义和选择
| Pipework components - Definition and selection of DN (nominal size)
|
BS EN ISO 8795-2002
| 用于输送供人消耗用水的塑料管道系统.析出物渗移量的车测定.塑料管道、管件和连接件的析出物渗移量的测定
| Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints
|
BS ISO 10147-2005
| 交联聚乙烯(PE-X)管和管件.通过测定凝胶含量估算交联度
| Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
|
BS ISO 10838-1-2001
| 燃气用聚乙烯管道系统的机械管件.标称外径小于或等于63mm的管道用金属管件
| Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Metal fittings for pipes of nominal outside diameter less than or equal to 63mm
|
BS ISO 10838-2-2001
| 燃气用聚乙烯管道系统的机械式管件.标称外径大于63mm的管道用金属管件
| Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Metal fittings for pipes of nominal outside diameter greater than 63mm
|
BS ISO 10838-3-2001
| 燃气用聚乙烯管道系统的机械式管件.标称外径小于或等于63mm的管道用热塑性塑料管件
| Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm
|
BS ISO 15840-2006
| 船舶和海上技术.海上设备用热固性树脂纤维玻璃管和管件的标准规范
| Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
|
BS ISO 16132-2004
| 球墨铸铁管和配件.水泥灰浆衬套的密封涂层
| Ductile iron pipes and fittings - Seal coats for cement mortar linings
|
BS ISO 16241-2005
| 管和管件用聚乙烯材料耐慢速裂纹伸展的测定的缺口拉伸试验(PENT)
| Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
|
BS ISO 4179-2005
| 压力和非压力管道用球墨铸铁管和配件.水泥灰浆内衬
| Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining
|
BS ISO 727-1-2002
| 承压的管件用未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的带普通管套的管配件.米制系列
| Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Metric series
|
BS ISO 727-2-2005
| 压力管件用由未增塑聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)或丙烯腈/丁二烯/苯乙烯(ABS)制的带普通管套的管
| Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Inch-based series
|
BS ISO 8085-1-2001
| 供应燃气的聚乙烯管上使用的聚乙烯管件.米制系列.规范.用加热工具进行套筒熔融的管件
| Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Fittings for socket fusion using heated tools
|
BS ISO 8085-2-2001
| 供应气体燃料的聚乙烯管上使用的聚乙烯管件.米制系列.规范.熔接用的、通过加热器具进行的套筒熔融用的及与
| Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings
|
BS ISO 8085-3-2001
| 供应燃气的聚乙烯管使用的聚乙烯管件.米制系列.规范.电熔融管件
| Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Electrofusion fittings
|
BS ISO 8179-1-2004
| 球墨铸铁管.外部镀锌.终饰层用金属锌
| Ductile iron pipes - External zinc-based coating - Metallic zinc with finishing layer
|
BS ISO 9349-2005
| 预绝缘球墨铸铁管道系统
| Preinsulated ductile iron pipeline systems
|
编号 | 中文名称 | 英文名称 |