法国铸铁管标准(NF cast iron pipe standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
NF A48-720-1999 建筑物排水用铸铁管和配件及其接头和附件.要求、试验方法和质量保证 (Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance.)
NF A48-801-2002 水管用球墨铸铁管、配件和附件及其接头.要求和试验方法 (Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods.)
NF A48-810-1995 燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)
NF A48-810/A1-1999 燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)
NF A48-820-1994 污水排放用球墨铸铁管、配件、附件及其接头.要求和试验方法 (Ductile iron pipes, fittings, accessories and their joints for sewerage application. Requirements and tests methods.)
NF A48-840-1984 铸造产品.铸制产品.球墨铸铁管道部件.法兰盘系列.法兰盘.定义.尺寸.规范 (FOUNDRY PRODUCTS. SPHEROIDAL GRAPHITE CAST IRON PIPES. FLANGES SERIES. FLANGES DEFINITION. DIMENSIONS. SPECIFICATIONS.)
NF A48-850-1984 铸造产品.溢流管用球墨铸铁管道部件.溢流管.承插件系列.技术规范 (FOUNDRY PRODUCTS. DUCTILE CAST IRON PIPING ELEMENTS FOR PRE-INSULATED PIPELINE. PRE-INSULATED PIPES,SOCKET SERIE. TECHNICAL SPECIFICATION.)
NF A48-851-1985 铸造产品.压力管道用球墨铸铁管.聚氨酯涂层 (FOUNDRY PRODUCTS. DUCTILE IRON PIPES FOR PRESSURE PIPELINES. POLYURETHAN EXTERNAL COATING.)
NF A48-860-1981 铸造产品.承压管道用可锻铸铁管道部件.承插系列.GS快速接头.连接尺寸和连接附件 (Foundry products. Ductile cast iron piping elements. Socket serie. GS express joint. Assembly dimensions and joint accessories.)
NF A48-870-1981 铸造产品.承接管道用可锻铸铁管道部件.承插系列.GS标准接头.连接尺寸和连接附件 (Foundry products. Ductile cast iron piping elements. Socket series. GS standard joint. Assembly dimensions and joint accessories.)
NF A48-902-1985 铸造产品.压力管道用球墨铸铁管.离心水泥砂浆内饰面.新涂覆砂浆成分的控制 (Foundry products. Ductile iron pipes for pressure pipelines. Contrifugal cement mortar internal lining. Composition controls of freshly applied mortar.)
NF D18-201-1989 卫生设备管件.排放阀和混合阀的一般技术规范(公称尺寸1/2)PN 10.最低水压0.05MPa(0.5巴) (Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) pn 10. Minimum flow pressure of 0,05 MPa (0,5 bar).)
NF D18-208-1997 (PN 10)卫生间管件的淋浴用软管 (Showers hoses for (PN 10) sanitary tapware.)
NF D18-213-1996 卫生间管件.自动关闭阀PN 10 (Sanitary tapware. Automatic shut-off valves pn 10.)
NF D36-113-1-2001 使用商用丙烷,商用丁烷和蒸汽相混合物的橡胶和塑料管件和软管组件和配件.第1部分:橡胶,塑料管件和软管的要 (Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase - Part 1 : requirements for rubber and plastics tubing and ho)
NF E29-000-1996 管件.标准压力的定义和选择(欧洲标准EN 1333) (Pipework components. Definition and selection of pn.)
NF P41-220/A1-1999 DTU 60.2.建筑工程.土壤水,雨水,废水排水铸铁管道的技术规范 (DTU 60.2 - Building works - Cast ison pipes for soil water, rain water and waste water drainage - Technical specification.)
NF P41-220/A2-2000 DTU 60.2.建筑工程.土壤水,雨水,废水排水铸铁管道的技术规范 (DTU 60.2 - Building works - Cast iron for soil water, rain water and waste water drainage - Technical specifications.)
NF T54-016-4-1999 供水用塑料管道系统.未增塑聚氯乙烯.第4部分:管件和附件 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4 : valves and ancillary equipment.)
NF T54-090-1976 塑料.未增塑聚氯乙烯和氯化聚氯乙烯管件.管和接头颜色 (PLASTICS. UNPLASTICIZED AND CHLORINATED PVC PIPES. COLOUR OF PIPES AND FITTINGS.)
NF T54-095-1985 塑料.未增塑聚氯乙烯管件接头粘合溶剂.使用特性 (Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.)
NF T54-300-3-2003 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第3部分:管件 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.)
NF T54-934-1997 塑料管道系统.管件,阀和附件.气流率/压降关系的测定 (Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships.)
编号中文名称英文名称

返回