| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI/ASTM B799-1995
| 亚硫酸/二氧化硫蒸气测定金和钯镀层孔隙度的方法
| Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
|
| ANSI/AWS C2.23/C 2.23M-2003
| 铝、锌及其合金的热喷镀层(金属化处理)和钢防腐蚀保护复合材料的应用规范
| Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
|
| ANSI/EIA 364-48-1990
| 接插件金属镀层厚度测量的测试程序
| Test Procedure for Metallic Coating Thickness Measurements of Contacts
|
| ASME B32.1-1952
| 无镀层金属薄板的最佳厚度(0.250英寸及以下)
| (Preferred thicknesses for uncoated thin flat metals (under 0,250 In.))
|
| ASTM A 1005/A 1005M-2000
| 双埋弧焊、纵向和螺旋焊缝、平头、无镀层、钢制总管的标准规范
| Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
|
| ASTM A 1006/A 1006M-2000
| 激光束焊、平头、无镀层、钢制总管的标准规范
| Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
|
| ASTM A 309-2001
| 用三点试验法测定长镀锌薄钢板镀层重量和成分的标准试验方法
| Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
|
| ASTM A 562/A 562M-2006
| 玻璃或扩散金属镀层的压力容器用锰钛合金碳素钢板
| Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
|
| ASTM A 879/A 879M-2004
| 每面镀层质量应予标明的电解镀锌薄钢板标准规范
| Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
|
| ASTM A 90/A 90M-2001
| 镀锌和镀锌合金钢铁制品镀层重量的标准试验方法
| Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
|
| ASTM A 918-2000
| 每面镀层质量应予标明的电解镀锌镍合金薄钢板标准规范
| Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
|
| ASTM B 136-1984
| 铝表面阳极镀层的着色阻力的测定方法
| Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
|
| ASTM B 200-1985
| 钢及铁合金表面铅和铅锡合金的电解沉积镀层标准规范
| Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
|
| ASTM B 244-1997
| 用涡流仪器测量铝阳极镀层及其它非磁性基底金属绝缘镀层的厚度标准试验方法
| Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
|
| ASTM B 252-1992
| 电镀层和转化涂层用锌合金压模铸件的制备
| Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
|
| ASTM B 281-1988
| 电镀层和转化镀层用铜和铜基合金的制备
| Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
|
| ASTM B 380-1997
| 装饰电镀层的涂膏密室耐蚀试验标准试验方法范
| Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
|
| ASTM B 456-2003
| 铜+镍+铬及镍+铬的电解沉积镀层标准规范
| Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
|
| ASTM B 457-1967
| 铝表面阳极镀层阻抗测定的标准试验方法
| Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
|
| ASTM B 489-1985
| 金属表面电解沉积和自动催化沉积金属镀层延展性的弯曲试验
| Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
|
| ASTM B 499-1996
| 用磁性法测量磁性基底金属的非磁性镀层厚度的标准试验方法
| Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
|
| ASTM B 504-1990
| 用库仑法测量金属镀层厚度的试验方法
| Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
|
| ASTM B 555-1986
| 用滴定试验法测量电解沉积金属镀层厚度
| Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test
|
| ASTM B 578-1987
| 电镀层显微硬度的标准试验方法
| Standard Test Method for Microhardness of Electroplated Coatings
|
| ASTM B 579-1973
| 锡铅合金的电解沉积镀层(焊接板)
| Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
|
| ASTM B 580-1979
| 铝阳极氧化镀层
| Anodic Oxide Coatings on Aluminum
|
| ASTM B 604-1991
| 塑料表面装饰用铜加镍铬镀层标准规范
| Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
|
| ASTM B 605a-1995
| 锡镍合金电解沉积镀层标准规范
| Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
|
| ASTM B 634-1988
| 工程用铑电解沉积镀层
| Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
|
| ASTM B 635-2000
| 镉锡机械沉积镀层标准规范
| Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
|
| ASTM B 636-1984
| 用螺旋收缩仪测量电镀金属镀层内应力的方法
| Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
|
| ASTM B 659-1990
| 金属和无机物镀层厚度的测量方法
| Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
|
| ASTM B 680-1980
| 用酸溶解法测定铝的阳极镀层封闭质量的试验方法
| Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
|
| ASTM B 681-1988
| 用光截面显微镜测量铝阳极镀层厚度及不透明表面的其它透明涂层厚度的试验方法
| Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope
|
| ASTM B 695-2004
| 钢铁表面的锌机械沉积镀层标准规范
| Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
|
| ASTM B 696-2000
| 镉机械沉积镀层标准规范
| Standard Specification for Coatings of Cadmium Mechanically Deposited
|
| ASTM B 697-1988
| 电沉积金属镀层和无机镀层检验用抽样方法的选择
| Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
|
| ASTM B 699-1986
| 钢铁表面镉真空沉积镀层标准规范
| Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
|
| ASTM B 764-2004
| 多层镍镀层中单层的同步厚度和电极电势测定的标准试验方法(STEP试验)
| Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
|
| ASTM B 765-2003
| 电镀层和相关金属镀层孔隙率和总缺陷试验选择的标准指南
| Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
|
| ASTM B 799-1995
| 用亚硫酸/SO2蒸汽测试金和钯镀层孔隙度的标准试验方法
| Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
|
| ASTM B 840-1999
| 锌钴合金沉积物用电解镀层标准规范
| Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
|
| ASTM B 841-1999
| 锌镍合金沉积物用电解镀层标准规范
| Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
|
| ASTM B 842-1999
| 锌铁合金沉积物用电解镀层标准规范
| Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
|
| ASTM B 850-1998
| 对钢镀层后处理以减小氢脆变危险的标准指南
| Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
|
| ASTM B 867-1995
| 工程用钯-镍电镀层的标准规范
| Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
|
| ASTM B 874-1996
| 用于固体渗金属处理的铬扩散镀层的标准规范
| Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
|
| ASTM C 1349-2004
| 建筑用聚碳酸酯镀层平板玻璃的标准规范
| Standard Specification for Architectural Flat Glass Clad Polycarbonate
|
| ASTM D 5367-2000
| 用水或水/磨料喷洗时为防止钢生锈用抑制剂处理的表面上镀层评定的标准规范
| Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
|
| ASTM D 5794-1995
| 用离子色谱法测定电离子镀层渗透率的标准导则
| Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
|
| ASTM D 6676-2001
| 用内部加热测定高温下外部管道镀层的阴极断接的标准试验方法
| Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating
|
| ASTM F 1135-1999
| 紧固件用铬酸镉或锌有机防蚀镀层标准规范
| Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
|
| ASTM F 1136-2004
| 紧固件用锌/铝防蚀镀层的标准规范
| Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
|
| ASTM F 1941M-2005
| 螺纹紧固件电镀层的标准规范(米制)
| Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]
|
| ASTM F 2024-2000
| 羟磷灰石等离子喷镀层相含量的X射线衍射测定标准实施规范
| Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
|
| ASTM G 18-1988
| 镀层管道连接件,配件及搭接板的试验方法
| Test Method for Joints, Fittings and Patches in Coated Pipelines
|
| ASTM G 33-1999
| 金属镀层钢样品对大气腐蚀检测数据的记录的标准操作规程
| Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
|
| 编号 | 中文名称 | 英文名称 |
|---|