| 编号 | 中文名称 | 英文名称 |
|---|
| NF A05-103-1995
| 金属镀层.硫代乙酰胺腐蚀试验(TAA试验)
| (METALLIC COATINGS. THIOACETAMIDE CORROSION TEST (TAA TEST). (EUROPEAN STANDARD EN ISO 4538).)
|
| NF A05-105-1995
| 金属镀层和其它无机物涂层.适用于储存情况的腐蚀试验一般规则
| (Metallic and other non-organic coatings. General rules for corrosion tests applicable for storage conditions.)
|
| NF A49-880-1983
| 钢管.热浸镀锌.管和管附件镀层的化学分析
| (Steel tubes. Hot dip galvanization. Chemical analysis of the coating of tubes and tubular accessories.)
|
| NF A81-325-1997
| 焊条.非合金钢和细晶粒钢制惰性气体保护钨焊接用棒材,线材和镀层
| (WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).)
|
| NF A91-001-2000
| 金属和合金防腐蚀.表面处理、金属和其他无机镀层.词汇.
| (Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary.)
|
| NF A91-010-1984
| 金属镀层和表面处理.术语.分类.符号
| (Metallic coatings and surface treatments of metals. Terminology. Classification. Symbols.)
|
| NF A91-012-1977
| 金属镀层.易损件的金属镀层保护
| (METALLIC COATINGS. WEAR PARTS PROTECTED BY METALLIC COATINGS.)
|
| NF A91-080-1987
| 金属镀层.锡电镀层.规范和试验方法
| (Metallic coatings. Electroplated coatings of tin. Specification and test methods.)
|
| NF A91-081-1987
| 金属镀层.锡镍合金电镀层.规范和试验方法
| (Metallic coatings. Electroplated coatings of tin-nickel alloy. Specification and test methods.)
|
| NF A91-082-1987
| 金属镀层.锡铅合金电解沉淀.规范和试验方法
| (METALLIC COATINGS. ELECTROPLATED COATINGS OF TIN-LEAD ALLOYS. SPECIFICATION AND TEST METHODS.)
|
| NF A91-091-1987
| 金属镀层.工业用的银和银合金电解沉淀
| (Metallic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes.)
|
| NF A91-092-1-1987
| 金属镀层.电解银和电解合金镀层的试验方法.第1部分:镀层厚度的测定
| (Metallic coatings. Test methods for electrodeposited silver and silver alloys coatings. Part 1 : determination of coating thickness.)
|
| NF A91-092-2-1987
| 金属镀层.电解银和电解合金镀层的试验方法.第2部分:粘附试验
| (Metallic coatings. Test methods for electrodeposited silver and silver alloy coatings. Part 2 : adhesion tests.)
|
| NF A91-094-1987
| 金属镀层.工业用金和镀金合金电镀层
| (Metallic coatings. Electrodeposited gold and gold alloy coatings for engineering purposes.)
|
| NF A91-095-1-1987
| 金属镀层.金和金合金镀层试验方法:第1部分:镀层厚度的测定
| (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : determination of coating thickness.)
|
| NF A91-095-2-1987
| 金属镀层.金和金合金镀层试验方法:第2部分:环境试验
| (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : environmental tests.)
|
| NF A91-095-3-1995
| 金属镀层.金及金合金电镀层的试验方法.第3部分:孔隙率的阳极电解试验
| (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 3 : electrographic tests for porosity.)
|
| NF A91-095-4-1987
| 金属镀层.金和金合金镀层试验方法:第4部分:金含量的测定
| (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 4 : determination of gold content.)
|
| NF A91-095-5-1987
| 金属镀层.金和金合金镀层试验方法:第5部分:粘附试验
| (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 5 : adhesion tests.)
|
| NF A91-095-6-1995
| 金属镀层.电镀金和金合金镀层的测试方法.第6部分:残留盐类的测定
| (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 6 : determination of the presence of residual salts.)
|
| NF A91-103-1969
| 金属镀层.镀镍和镀铬的锌合金零件的验收条件
| (Metallic coatings. Acceptance conditions for nickel- and chromium-plated zinc alloy parts.)
|
| NF A91-107-1995
| 金属镀层.延展性的测量方法述评
| (METALLIC COATINGS. REVIEW OF METHODS OF MEASUREMENT OF DUCTILITY. (EUROPEAN STANDARD EN ISO 8401).)
|
| NF A91-108-1995
| 金属镀层.镀层厚度的测量.扫描电子显微镜法
| (Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.)
|
| NF A91-110-1995
| 金属和氧化物镀层.镀层厚度的测定.显微镜法
| (Metallic and oxide coatings. Measurement of coating thickness. Microscopical method.)
|
| NF A91-111-1995
| 金属镀层.镀层厚度的测量.阳极分解的电量计法
| (Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution.)
|
| NF A91-112-1995
| 磁性基质的非磁性镀层.镀层厚度的测量.磁性法
| (Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method.)
|
| NF A91-113-1995
| 非磁性基体金属上的非导体镀层.镀层厚度的测量.涡流法
| (Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method.)
|
| NF A91-114-1995
| 金属镀层.镀层厚度的测量.表面光法度轮廓仪法
| (Metallic coatings. Measurement of coating thickness. Profilometric method.)
|
| NF A91-116-2001
| 金属镀层.镀层厚度的测定.X射线光谱测定法
| (Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods.)
|
| NF A91-118-2002
| 冶金和其他非有机镀层.维氏硬度计和努氏显微硬度试验机
| (Metallic and other inorganic coatings - Vickers and Knoop microhardness tests.)
|
| NF A91-119-1981
| 铬电解镀层.电解腐蚀试验.(EC试验)
| (Electrodeposited chromium coatings. Electrolytic corrosion testing. (EC test).)
|
| NF A91-120-1995
| 磁性和非磁性基质的镍电镀层.镀层厚度的测量.磁性法(欧洲标准EN ISO 2361)
| (Electrodeposited nickel coatings on magnetic and non-magnetic substrates. Measurement of coating thickness. Magnetic method.)
|
| NF A91-123-1995
| 金属镀层.铁类材料的热浸镀锌涂层.用重量测定法测定单位面积重量
| (METALLIC COATINGS. HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS. GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA. (EUROPEAN STANDARD EN ISO 1460).)
|
| NF A91-124-2002
| 金属镀层.热浸镀锌.粘结强度试验法
| (Metallic coatings - Galvanization by immersion in molten zinc (hot-dip galvanizing) - Adhesion test methods.)
|
| NF A91-131-1962
| 热镀锌钢丝.锌镀层的规范
| (HOT-GALVANIZED STEEL WIRE. ZINC COATING SPECIFICATION.)
|
| NF A91-140-1995
| 金属基质上的金属镀层.电镀层和化学沉积层.试验附着力的方法述评
| (METALLIC COATINGS ON METALLIC SUBSTRATES. ELECTRODEPOSITED AND CHEMICALLY DEPOSITED COATINGS. REVIEW OF METHODS AVAILABLE FOR TESTING ADHESION. (EUROPEAN STANDARD EN ISO 2819).)
|
| NF A91-148-1998
| 金属镀层.孔隙试验.潮湿硫试验.
| (METALLIC COATINGS. POROSITY TESTS. HUMID SULFUR (FLOWERS OF SULFUR) TEST. (EUROPEAN STANDARD EN ISO 12687).)
|
| NF A91-149-2001
| 金属镀层.孔隙试验.电图记录金属基质上金和钯涂层的孔隙度
| (Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.)
|
| NF A91-150-2001
| 金属镀层.孔隙试验.通过亚硫酸和二氧化硫蒸气的金和钯涂层的孔隙度
| (Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour.)
|
| NF A91-220-2003
| 热喷镀.热喷镀层的特征和检验
| (Thermal spraying - Characterization and testing of thermally sprayed coatings.)
|
| NF A91-450-1981
| 铝及其合金的阳极氧化.铝的阳极氧化物镀层的一般规范
| (Anodizing of aluminium and its alloys. General specifications for anodic oxide coatings on aluminium.)
|
| NF A91-472-1980
| 锌或镉电解沉积物的铬酸盐转化镀层.规范和试验方法
| (Chromate conversion coatings on zinc or cadmium electrodeposits. Specifications and test methods.)
|
| NF C20-131-1974
| 铝导线用带导电镀层的有铝片或铜片的接头.规则和尺寸
| (LUGS WITH COPPER OR ALUMINIUM FLATS AND WITH CONDUCTING COATING FOR ALUMINIUM CONDUCTORS. REQUIREMENTS AND DIMENSIONS.)
|
| NF E25-009-1999
| 紧固件.电镀层
| (Fasteners - Electroplated coatings.)
|
| NF L52-250-506-2002
| 航空航天系列.飞行器用电缆.试验方法.第506部分:镀层连续性
| (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506 : plating continuity.)
|
| NF L52-250-507-2002
| 航空航天系列.飞行器用电缆.试验方法.第507部分:镀层的粘结强度
| (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507 : adherence of plating.)
|
| NF P37-101-1988
| 屋顶附件.铜部件的热镀锡层.镀层规范
| (ROOF FITTINGS. FIRE TINNED FINISH OF COPPER PARTS. FINISH SPECIFICATIONS.)
|
| NF S80-771-1973
| 钟表业.手表壳和钟表零件合金镀层的一般特性
| (Horology. General requirements for gold alloy coverings on watch cases and horological components.)
|
| NF S80-772-1992
| 钟表制造.镀层的试验方法
| (HOROLOGY. GOLD-PLATED WATCH-CASES. TEST METHODS FOR COATINGS.)
|
| NF S86-306-2003
| 时间测量仪表.辐射发光镀层检验条件
| (Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits.)
|
| NF T37-001-1-2001
| 镀金属线圈.试验方法.第1部分:镀层厚度
| (Coil coated metals - Test methods - Part 1 : coating thickness.)
|
| 编号 | 中文名称 | 英文名称 |
|---|