编号 | 中文名称 | 英文名称 |
BS 1140-1993
| 有镀层和无镀层低碳钢电阻点焊规范
| Specification for resistance spot welding of uncoated and coated low carbon steel
|
BS 1872-1984
| 锡电镀层规范
| Specification for electroplated coatings of tin
|
BS 2000-397-1995
| 石油及其产品的试验方法.沥清粘合剂的回收.回转式镀层蒸发器二氯甲烷萃取法
| Methods of test for petroleum and its products - Recovery of bitumen binders - Dichloromethane extraction rotary film evaporator method
|
BS 2816-1989
| 工程用银和银合金电镀层的规范方法
| Method for specifying electroplated coatings of silver and silver alloys for engineering purposes
|
BS 3338-15-1965
| 锡及锡合金取样及分析方法.第15部分:轴承用巴比合金中铜和铅含量测定方法(电解镀层法)
| Methods for the sampling and analysis of tin and tin alloys - Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)
|
BS 3382 Pts.1 & 2-1961
| 螺纹部件的电镀层规范.第1部分:钢制部件的镀镉层.第2部分:钢制部件的镀锌层
| Specification for electroplated coatings on threaded components. Cadmium on steel components. Zinc on steel components
|
BS 3382 Pts.3 & 4-1965
| 螺纹部件的电镀层规范.第3部分:钢制部件的镍或镍铬镀层.第4部分:铜及铜合金(包括黄铜)部件的镍或镍铬镀层
| Specification for electroplated coatings on threaded components. Nickel or nickel plus chromium on steel components. Nickel or nickel plus chromium on copper and copper alloy (including brass) components
|
BS 3382 Pts.5 & 6-1967
| 螺纹部件的电镀层规范.第5部分:铜和铜合金(包括黄铜)部件的锡镀层.第6部分:铜和铜合金(包括黄铜)部件的银镀
| Specification for electroplated coatings on threaded components. Tin on copper and copper alloy (including brass) components. Silver on copper and copper alloy (including brass) components
|
BS 3382-7-1966
| 螺纹零部件电镀层规范.第7部分:螺纹零部件厚电镀层
| Specification for electroplated coatings on threaded components - Thicker platings for threaded components
|
BS 3597-1984
| 65/35锡/镍合金电镀层规范
| Specification for electroplated coatings of 65/35 tin/nickel alloy
|
BS 3745-1970
| 金属镀层的加速腐蚀试验结果的评定方法
| Method for the evaluation of results of accelerated corrosion tests on metallic coatings
|
BS 4290-1989
| 装饰或保护用银和银合金电镀层的规范方法
| Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes
|
BS 4292-1-1989
| 金与金合金电镀层规定方法.第1部分:工程用金与金合金
| Method for specifying electroplated coatings of gold and gold alloys - Gold and gold alloys for engineering purposes
|
BS 4292-2-1989
| 金和金合金电镀层规定方法.第2部分:装饰或保护用金和金合金
| Method for specifying electroplated coatings of gold and gold alloys - Gold and gold alloys for decorative and protective purposes
|
BS 4601-1970
| 塑料材料的镍铬电镀层规范
| Specification for electroplated coatings of nickel plus chromium on plastics materials
|
BS 4641-1986
| 对工程用铬电镀层进行规范的方法
| Method for specifying electroplated coatings of chromium for engineering purposes
|
BS 4758-1986
| 对工程用镍电镀层进行规范的方法
| Method for specifying electroplated coatings of nickel for engineering purposes
|
BS 5466-7-1982
| 金属镀层腐蚀试验方法.第7部分:静态室外腐蚀试验
| Methods for corrosion testing of metallic coatings - Guidance on stationary outdoor exposure corrosion tests
|
BS 6041-1980
| 电沉积金属镀层及有关镀层光度的取样方法:按属性进行检验的程序
| Method of sampling of electrodeposited metallic coatings and related finishes: procedures for inspection by attributes
|
BS 6137-1982
| 锡铅合金电镀层规范
| Specification for electroplated coatings of tin/lead alloys
|
BS 6161-11-1985
| 铝及铝合金阳极氧化镀层试验方法.第11部分:光电反射计测量总反射率
| Methods of test for anodic oxidation coatings on aluminium and its alloys - Measurement of total reflectance using a photoelectric reflectometer
|
BS 6161-14-1987
| 铝及铝合金阳极氧化镀层试验方法.第14部分:红外反射率测定
| Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of infra-red reflectance
|
BS 6161-18-1991
| 铝及铝合金阳极氧化镀层试验方法.第18部分:表面耐磨性测定
| Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of surface abrasion resistance
|
BS 6161-1993
| 铝及其合金的阳极氧化镀层的试验方法.第19部分:图象清晰度的测定.仪器测定法
| Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of image clarity. Instrumental method
|
BS 6161-7-1984
| 铝及其合金阳极氧化镀层试验方法.第7部分:阳极氧化有色镀层的人造光耐光度加速测定法
| Methods of test for anodic oxidation coatings on aluminium and its alloys - Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light
|
BS 6338-1982
| 锌和镉电镀层的铬酸盐转化镀层规范
| Specification for chromate conversion coatings on electroplated zinc and cadmium coatings
|
BS 6582-2000
| 连续热浸铅合金(铅锡合金)镀层的冷轧扁平碳钢制品
| Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products
|
BS 6669-1-1986
| 银和银合金电镀层的试验方法.第1部分:镀层厚度的测定
| Methods of test for electroplated silver and silver alloy coatings - Determination of coating thickness
|
BS 6669-2-1986
| 银和银合金电镀层的试验方法.第2部分:粘合力试验
| Methods of test for electroplated silver and silver alloy coatings - Adhesion tests
|
BS 6669-3-1989
| 银和银合金电镀层的试验方法.第3部分:残留盐的检测
| Methods of test for electroplated silver and silver alloy coatings - Detection of residual salts
|
BS 6670-1-1986
| 金和金合金电镀层的试验方法.第1部分:镀层厚度的测定
| Methods of test for electroplated gold and gold alloy coatings - Determination of coating thickness
|
BS 6670-4-1986
| 金和金合金电镀层的试验方法.第4部分:金含量的测定
| Methods of test for electroplated gold and gold alloy coatings - Determination of gold content
|
BS 6670-5-1986
| 金和金合金电镀层的试验方法.第5部分:粘合力试验
| Methods of test for electroplated gold and gold alloy coatings - Adhesion tests
|
BS EN 10334-2005
| 包装用钢.与人和动物消费用食品、产品或饮料接触的扁平钢制品.非镀层钢(黑钢板)
| Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate)
|
BS EN 12329-2000
| 金属腐蚀防护.铁和钢的电解锌镀层加补充处理
| Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel
|
BS EN 12330-2000
| 金属腐蚀防护.钢铁的镉电解镀层
| Corrosion protection of metals - Electrodeposited coatings of cadmium on iron or steel
|
BS EN 12373-4-1999
| 铝和铝合金.阳极氧化.预先酸处理的染料污点密封试验的阳极氧镀层吸收强度损失评估
| Aluminium and aluminium alloys - Anodizing - Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
|
BS EN 12373-5-1999
| 铝和铝合金.阳极氧化.通过导纳测量评估密封阳极氧化物镀层质量
| Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
|
BS EN 12373-6-1999
| 铝和铝合金.阳极氧化.测定未预先酸处理的浸入磷酸/铬酸溶液后质量损失以评估密封阳极氧化镀层质量
| Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment
|
BS EN 12373-7-1999
| 铝和铝合金.阳极氧化.测定预先酸处理的浸入磷酸/铬酸溶液后质量损失评估密封阳极氧化镀层质量
| Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
|
BS EN 12373-8-1999
| 铝和铝合金.阳极氧化.有色阳极氧化镀层对紫外光和热的比较牢固度测定
| Aluminium and aluminium alloys - Anodizing - Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
|
BS EN 12373-9-1999
| 铝和铝合金.阳极氧化.使用磨损轮磨损试验设备测定阳极氧化镀层磨损指数和磨损抗性
| Aluminium and aluminium alloys - Anodizing - Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
|
BS EN 12534-1999
| 焊接消耗品.高强度钢气体保护金属弧焊镀层和焊条,金属丝,金属电极.分类
| Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification
|
BS EN 12540-2000
| 金属腐蚀防护.镍、镍加铬、铜加镍和铜加镍加铬的电解镀层
| Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
|
BS EN 2133-1998
| 具有规定拉力强度(LE)1450 MPa的钢、铜、铜合金和镍合金的镉镀层
| Cadmium plating of steels with specified tensile strength 1450 MPa, copper, copper alloys and nickel alloys
|
BS EN 248-2003
| 卫生设备配件.镍铬电镀层的一般规范
| Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr
|
BS EN 2830-1993
| 采用剪切法对金属镀层的粘合试验
| Adhesion test for metallic coatings by shearing action
|
BS EN 3475-508-2002
| 航空航天系列.飞行器用电缆.试验方法.镀层厚度
| Aerospace series - Cables, electrical, aircraft use - Test methods - Plating thickness
|
BS EN 60384-20-1-1999
| 电气设备用固定电容器.空白详细规范:固定金属化聚苯撑硫化膜镀层表面固定直流电容器.评定级EZ
| Fixed capacitors for use in electronic equipment - Blank detail specification: fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ
|
BS EN 60384-20-1999
| 电气设备用固定电容器.分规范:固定金属化聚苯撑硫化膜镀层表面固定直流电容器
| Fixed capacitors for use in electronic equipment - Sectional specification: fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
|
BS EN ISO 1460-1995
| 金属镀层.铁类材料的热浸镀锌涂层.用重量测定法测定单位面积重量
| Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
|
BS EN ISO 14923-2003
| 热喷镀.热喷镀层的特征和检验
| Thermal spraying - Characterization and testing of thermally sprayed coatings
|
BS EN ISO 2360-2003
| 非磁性电导基体金属上的非导体镀层.镀层厚度的测量.波幅灵敏涡流法
| Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method
|
BS EN ISO 2361-1984
| 磁性和非磁性基体的镍电镀层.镀层厚度的测量.磁性法
| Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method
|
BS EN ISO 2819-1980
| 金属基体上的金属覆层.电镀层和化学沉积层.试验附着力方法的评述
| Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion
|
BS EN ISO 3613-2001
| 锌,镉,铝-锌合金和锌铝合金的铬酸盐转化镀层.试验方法
| Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
|
BS EN ISO 4516-2002
| 金属和其他无机镀层.维氏硬度计和努氏显微硬度试验机
| Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
|
BS EN ISO 4524-3-1986
| 金属镀层.电镀金和金合金镀层测试方法.孔隙度电图试验
| Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Electrographic tests for porosity
|
BS EN ISO 4524-6-1989
| 金属镀层.电镀金和金合金镀层测试方法.第6部分:残留盐类测定
| Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Determination of the presence of residual salts
|
BS EN ISO 4526-2005
| 金属覆盖层.工程用镍电镀层
| Metallic coatings - Electroplated coatings of nickel for engineering purposes
|
BS EN ISO 4538-1979
| 金属镀层.硫代乙酰胺腐蚀试验(TAA试验)
| Metallic coatings - Thioacetamide corrosion test (TAA test)
|
BS EN ISO 4543-1995
| 金属镀层和其它无机物涂层.储存腐蚀试验一般规程
| Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions
|
BS EN ISO 6158-2004
| 金属覆层.工程用铬电镀层
| Metallic coatings - Electrodeposited coatings of chromium for engineering purposes
|
BS EN ISO 8401-1988
| 金属镀层.延展性测量方法审查
| Metallic coatings - Review of methods of measurement of ductility
|
BS EN ISO 9220-1989
| 金属镀层.镀层厚度测量.扫描电子显微镜法
| Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
|
BS ISO 17514-2005
| 时间测量仪表.荧光镀层.试验方法和要求
| Time-measuring instruments - Photoluminescent deposits - Test methods and requirements
|
BS ISO 4524-2-2000
| 金属镀层.金及金合金电镀层的试验方法.混合流动气体(MFG)环境试验
| Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Mixed flowing gas (MFG) environmental tests
|
BS ISO 4525-2003
| 金属镀层.塑料材料上的镍加铬电镀层
| Metallic coatings - Electroplated coatings of nickel plus chromium on plastics materials
|
BS ISO 4526-2005
| 金属覆层.工程用镍电镀层
| Metallic coatings - Electroplated coatings of nickel for engineering purposes
|
DD ENV 61112-2002
| 电绝缘材料的涂镀层
| Blankets of insulating material for electrical purposes
|
编号 | 中文名称 | 英文名称 |