| 编号 | 中文名称 | 英文名称 |
|---|
| CR 12471-2002
| 镍从直接和长期接触皮肤的物品的合金和镀层中释放的屏蔽试验
| Screening tests for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin
|
| EN 10244-2-2001
| 钢丝和钢丝制品 钢丝上的非黑色金属外层 第2部分：锌或锌合金镀层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
|
| EN 10244-3-2001
| 钢丝和钢丝制品 钢丝上的非黑色金属外层 第3部分：铝镀层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings
|
| EN 10244-4-2001
| 钢丝和钢丝制品 钢丝上的非黑色金属外层 第4部分：锡镀层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings
|
| EN 10244-5-2001
| 钢丝和钢丝制品 钢丝上的非黑色金属外层 第5部分：镍镀层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings
|
| EN 10244-6-2001
| 钢丝和钢丝制品 钢丝上的非黑色金属外层 第6部分：铜、青铜或黄铜镀层
| Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings
|
| EN 10292-2000+A1-2003
| 冷成型用较高屈服强度的连续热扎镀层钢带和薄钢板 交货技术条件
| Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions
|
| EN 12329-2000
| 金属防腐 铁或钢上带辅助处理的锌电镀层
| Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel
|
| EN 12330-2000
| 金属防腐 铁或钢上的镉电镀层
| Corrosion protection of metals - Electrodeposited coatings of cadmium on iron or steel
|
| EN 12487-2000
| 金属的防腐蚀 铝和铝合金上清洗和非清洗的铬酸盐转化镀层
| Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
|
| EN 12540-2000
| 金属的防腐 镍、镍+铬、铜+镍和铜+镍+铬的电沉渍镀层
| Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
|
| EN 13143-2003
| 金属和其它有机镀层 有关孔隙度的定义和约定
| Metallic and other inorganic coatings - Definitions and conventions concerning porosity
|
| EN 13144-2003
| 金属和其它有机镀层 通过拉伸试验定量测量附着力的方法
| Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
|
| EN 13523-1-2001
| 喷镀金属圈材 试验方法 第1部分：镀层厚度
| Coil coated metals - Test methods - Part 1: Coating thickness
|
| EN 13523-23-2002
| 金属镀层线圈 试验方法 第23部分：含二氧化硫的潮湿空气中的色稳定性
| Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide
|
| EN 13603-2002
| 铜和铜合金 评估电气用途拉制圆铜线上的保护锡镀层的试验方法
| Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
|
| EN 248-2002
| 卫生用水龙头 镍铬电镀层通用技术规范
| Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr
|
| EN 2591-507-2002
| 航空航天系列 光电连接元件 试验方法 第507部分：电镀层孔隙度
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 507: Plating porosity
|
| EN ISO 14713-1999
| 钢结构腐蚀防护 锌和铝镀层 指南
| Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines (ISO 14713:1999)
|
| EN ISO 2360-1995
| 非磁性基金属上非导电涂层 镀层厚度的测量 涡流法
| Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method (ISO 2360:1982)
|
| EN ISO 2361-1995
| 磁性和非磁性基体上的镍电度层 镀层厚度的测量 磁性法
| Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982)
|
| EN ISO 3497-2000
| 金属覆盖层 镀层的厚度测量 X射线光谱法
| Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000)
|
| EN ISO 3868-1994
| 金属和其他无机覆盖层 镀层厚度的测量 裵索多光束干射仪法
| Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976)
|
| EN ISO 4042-1999
| 紧固件 电镀层
| Fasteners - Electroplated coatings (ISO 4042:1999)
|
| EN ISO 4524-3-1995
| 金属覆盖层 金和金合金电镀层的试验方法 第3部分：孔隙率的电图试验
| Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:1985)
|
| EN ISO 4524-6-1994
| 金属覆盖层 金和金合金电镀层的试验方法 第6部分：残留盐的测定
| Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988)
|
| EN ISO 4527-2003
| 金属覆盖层 自催化镍－磷合金电镀层 规范和试验方法
| Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003)
|
| EN ISO 9220-1994
| 金属覆盖层 镀层厚度测量 扫描电子显微镜法
| Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988)
|
| prEN 1029-1993
| 装配式铁素产品的热浸电镀层 规范
| Hot dip galvanized coatings on fabricated ferrous products; specification
|
| prEN 10318-2000
| 锌基和铝基金属镀层厚度和化学成分的测定 常规方法
| Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
|
| prEN ISO 2360-2003
| 非磁性基金属上非导电涂层 镀层厚度的测量 振幅灵敏的涡流法
| Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO/FDIS 2360:2003) / Note: Intended as replacement for EN ISO 2360 (1995-01).
|
| prEN ISO 4526-2002
| 金属覆盖层 工程用镍电镀层
| Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO/DIS 4526:2002)
|
| prEN ISO 6158-2002
| 金属覆盖层 工程用铬电镀层
| Metallic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO/DIS 6158:2002)
|
| 编号 | 中文名称 | 英文名称 |
|---|